single sink bench for dishwasher
DESCRIPTION
Single Sink Bench For DishwasherTRANSCRIPT
■ Manufactured in High Grade 304 Stainless Steel
■ Good Performance on Anti-Rust & Anti-Acid
■ Full 1.2mm Thickness Stainless Steel Sheet
■ Polished to Hairline Finish
■ Top and Undershelf Reinforced with Channel Frame
■ Special Material Reinforcement Underlaid in Top
■ Knockdown-able Design, Supplied Flat-Pack
■ Easy to Assemble
■ Adjustable Leg and Undershelf
■ Standardlised Accessories
Feature:
Dishwasher Inlet Bench CEA
Copyright 2008 TONGHENG HOTEL EQUIPMENT CO, LTD. Specification subject to change without notice. C
CATERING EQUIPMENT
TONGHENG HOTEL EQUIPMENT CO, LTD
TONGHENG HOTEL EQUIPMENT TRADING LTD+86 757 83389428
+86 757 83387978
http://www.tongheng.com.hk
SIZE&DIMENDION:
Product Code Weight Cubic Meter
QuantityPer 20'FCL
610 WIDE
700 WIDE
TH-1SBBD-6.1-1200TH-1SBBD-6.1-1500TH-1SBBD-6.1-1800
1200x610x9001500x610x9001800x610x900
1200x700x9001500x700x9001800x700x900
506273
526576
0.460.570.68
0.520.640.77
594840
524235
TH-1SBBD-7-1200TH-1SBBD-7-1500TH-1SBBD-7-1800
Deluxe 1WB series
700
180
L
900
SPECIFICATION & DETAILS:TOP● 1.2mm 304 stainless steel sheet.
● 150mm height splash back with 45 bevelled edge.● 50mm turn down on 4 sides.● Box channel reinforcements around the edge.● Special "U"channels on tables for rigidity, up to 5 channels on tables over 2400mm in length.● 15mm special material underlaid between table top and channels for reinforcement and soundproofing.● 15mm height 45° bevelled wet edge.● Opening available on left or right.● Pre-driled screw hole for locking drawing on tables from 1500mm in length.● Choice of 610mm and 700mm bench depths.
SINK BOWLS● Fully welded and pollished 450mm(H)x450mm(L)x300mm(D) sink bowls. ● Sink Bowl available in left,right or center of the bench.
● Choice of Two hole sizes for 3" or 3 " waste outlet.
UNDER SHELF● 1.2mm 304 stainless steel sheet with stainless steel box channels underlaied for rigidity.● Largest undershelf design in the industry. Adjustable shelf for products with different height.● 50mm long pipe thimble provide maximum of stability.● 1.0mm Stainless Steel 304 25mm( ) tublar undershelf
LEGS● 1.2mm 304 stainless steel tube, good performance for rust-resistance.● Complete with 3cm adjustable stainless steel feet.● Tables over 1800mm in length are shipped with six legs.● Easily adapt to lockable casters to make tables mobile.● The undershelf is designed as pipe shelf, for better air-dry and prevent accumulation of stagnant water
CONSTRUCTION● Hairline finish for ease of clean and distinctive look. ● Table and undershelf hemmed to eliminate cuts from rough edges.● Heliarc welded construction creates uniform, rock-solid unit.● Gussets fully welded for extra rigidity.
DESIGN ADVANTAGE● Standardised accessories for customisation.● Specially design for quick and simple assembly.● Supplied flat packed for ease of transportation.
°
½
Ø
Size(LxWxH)