SINCE 1964

3

For nearly fi fty years, OMNIA has created a legacy of manufacturing elegant, high-quality door hardware FORGED from solid brass. This standard continues with the introduction of the OMNIA Prodigy collection.

Inspired by some of our most popular designs, these pieces were engineered with beauty, durability and affordability in mind. The selection of styles ranges from the sleek to

a sparkling glass knob. A striking assortment of concealed screw

roses, that will cover a pre- drilled 2 1/8” hole, beautifully complement any of the knobs or levers. A variety of gorgeous fi nishes allows for further

customization.

Diversity in the possible combinations that can be created, incomparable

value, and a reassurance that this is quality product from a trusted brand, make OMNIA Prodigy an ideal choice for all of your openings.

n.1: an impressive or wonderful example of a particular quality

In order to accommodate a variety of design aesthetics, all seven Prodigy designs are available in the spectrum of finishes shown here (unless otherwise noted).

POLISHED BRASS, LACQUERED

US3

POLISHED BRASS, UNLACQUERED

US3A*

* Only available for No.955 knob with traditional rose.

OIL-RUBBED BRONZE,LACQUERED

US10B

POLISHED NICKEL PLATED, LACQUERED

US14

SATIN NICKEL PLATED,LACQUERED

US15

POLISHED CHROME PLATED

US26

SATIN CHROME PLATED

US26D*

* Only available for No.912 lever with modern or rectangular rose.

TUSCAN BRONZE, LACQUERED

TB

FINISH INDEXSTANDARD STOCK

434 AR

785 TD

785 AR

785 RT

785 MD

434 RT

434 MD

434 TD

No. 895 43/8”

23/4”

895 AR

895 RT

895 TD

458 AR

458 TD

458 RT

No. 458

458 MD

All designs offered in the finishes as indicated on page 3.

21/2”

2”

895 MD

4 5

No. 785

No. 434 3”

21/2”

= Traditional Rose = Modern Rose = Arched Rose = Rectangular Rose

TD MD AR RT

41/2”

21/2”

All roses are concealed screw mounted.

912 AR

912 MD

912 TD

7

912 RT

565 AR

565 RT

565 TD

955 AR

955 TD

955 RT

955 MD

All designs offered in the finishes as indicated on page 3.

565 MD

6

No. 912 51/4”

3”No. 565 21/2”

23/8”

No. 955 3”

21/8”

T imeless appeal… impeccable quality… Prodigy… forging elegance.

= Traditional Rose = Modern Rose = Arched Rose = Rectangular Rose

TD MD AR RT

All roses are concealed screw mounted.

A

D

E

F

C

G

JK

B

M

A

B

C

H

I

L

N

O

PRODUCT DATA

Knob and Lever Latchset• 2 3/8 " (standard) and 2 ¾" backsets available.• Supplied for both 1 3/8 " and 1 ¾" door thickness as standard.• All lever latchsets meet ADA accessibility requirements.

Each set consists of solid brass knobs or levers, thru-bolted rose mechanisms, finished rose covers, latch, strike, faceplate, spindle, all necessary mounting screws, installation template and instructions.

About Our Tubular Latch• 55° rotation to retract latch. (28° rotation latch available. Refer to Prodigy Latchsets Price List.)• Tough, non-rusting materials used throughout. Face covers and strikes are solid brass. No.014 “Full Lip” strike supplied as standard or No.013 “T” strike as an option. Specify when ordering.• For almost five decades, OMNIA’s latches have been opening and closing hundreds of thousands of doors all around the world.

Functions• Passage: Latch operates by knob or lever from either side of door.• Privacy: Push pin provided for privacy inside room. Emergency release hole for outside room. Emergency release key also provided.• Single Dummy: Trim on one side of door only. Available for surface mounting. Knob or lever with rose.• Pair Dummy: Two single dummies.

9 8

LATCHSETS

Latchset Component ListA. Door Knob/Lever (2)B. Set Screws (2)C. Nylon Threaded Washers (2) D. Finished Rose E. Adaptor E F. Spindle (Teardrop groove positioned towards set screw) G. Tubular Latch H. Tubular Latch FaceplateI. Tubular Latch Strike PlateJ. Adaptor J

K. Thru-bolts (2)L. Finished Rose M. Privacy Locking Pin N. Washer Installation Tool O. Emergency Release Key

NO. 014 “FULL LIP” STRIKE (standard)

NO. 013 “T” STRIKE(optional)

11/2"

11/4"

11/8"

23/4 ”

13/16"

13/4"

21/4"

23/8" backset (standard)

or 2 3/4" backset(optional)

PASSAGE LATCH

23/4"23/8"

21/4"

33/8"

35/8"

3/4" 7/8"

7MM HUB

FACEPLATE5/32" Deep

1"

21/4"

“FULL LI STRIK (standard)

3

1/2"

11/41/41/ " 13/16"

21/41/41/ "

23/83/83/ "

(standard)or 2 3/or 3/or 2 3/2(optional)

PASS

23/43/43/ "23/83/83/ "

33/83/83/ "

35/85/85/ "

7/8"

7MM HUB

FACEPLATECEPLATECEPLA5/32" Deep

21/41/41/ "

Drawings not to scale

AUXILIARY DEADBOLT KITS The auxiliary deadbolt is intended for use with a door that needs to be locked with a key. This locking function can be used where security is required and features a keyed cylinder on the exterior and a turnpiece on the interior side of the door.

29/16" 5/8" 25/8"13/8"

"

All OMNIA cylinders are provided with a Schlage C keyway.

17/16

"

1

RECTDB US3, US10B, US14, US15, US26, US26D, TB 25/8" H x 25/8" W 5/8" Exterior Projection 13/8 " Interior Turnpiece Projection

TRADDB US3, US10B, US14, US15, US26, TB 25/8" Diameter 9/16" Exterior Projection 13/8" Interior Turnpiece Projection

ARCHDB US3, US10B, US14, US15, US26, TB 23/4" H x 25/8" W 5/8 " Exterior Projection 13/8" Interior Turnpiece Projection

25/8" 5/8" 25/8"13/8"

"

All OMNIA cylinders are provided with a Schlage C keyway.

25/8

"

25/8

"

17/16

"

1

25/8" 5/8" 25/8"13/8"

"

All OMNIA cylinders are provided with a Schlage C keyway.

2 3/4

"

17/16

"

1

9/9/9

All roses are concealed screw mounted.

11 10

HINGES

ROSES

Thru-Bolted Roses For Pre-Drilled 21/8" Hole

Rose designs include traditional, modern, arched or rectangular. These roses are intended for use with 21/8” pre-drilled doors. All designs available in the finishes as shown on page 3.

2 5/8 " dia.No. 673 No. 674 No. 675

Modern (MD) Rectangular (RT)Traditional (TD) Arched (AR)

No. 674No. 679 2 5/8"w x 3 1/4"h 2 5/8"w x 3"h2 5/8 " dia.

Hinge Catalog Please refer to our complete Hinge Catalog for optional hinge sizes and finishes.

No. 985BB/4Finial Options

All roses are concealed screw mounted.

No. 985/35No. 985/35

Since 1964, the name OMNIA has been synonymous with architectural hardware that is uniquely and stylishly designed, yet exceptionally functional. We are proud of the attention given to every element, from quality to innovation, from service to marketing. A blending of traditions of excellence, coupled with a strong commitment to modern technologies, makes OMNIA the sound choice for any residential or commercial application.

Box 330, Cedar Grove, New Jersey 07009

ph: 973.239.7272 / fax: 973.239.5960

© Copyright 2012,

No. OP1212

OTM TM