since 1901, filtrine has been a worldwide leader in the drinking water industry, designing and...
TRANSCRIPT
Introduction To Drinking Water Products2014
Since 1901, Filtrine has been a worldwide leader in the drinking water industry, designing and manufacturing the products that have defined the market and set the standard by which all other water products are measured.
The photos to the right show our home office and plant in Keene, NH. All Filtrine products are manufactured in this facility, and adhere to the strictest ‘US parts and labor’ standards.
A Brief Company Overview
Filtrine has been leading the Drinking Water industry since 1901. All products are Made in the USA, with American made parts. All Filtrine chillers, purifiers, and drinking fountains are built to perform reliably for
the entire life of a building. A company-wide commitment to sustainable design in line with LEED concepts. Serving the highest quality water with “Architecturally Designed” fixtures and
options. Ability to customize any product to suit unique project needs. We encourage
designers to think creatively.
COMPANY “TAKE-AWAY” POINTS
Filling Stations Drinking Fountains Chiller/Purifiers Particulate Filters & TasteMaster™ Purifiers
PRODUCT ‘FAMILIES’
Filtrine pioneered the engineering for FILLING STATIONS in response to a
growing “invasion” of hand-carried water into the workplace and the growing awareness
about the negative effects of bottled water on the environment.
BOTTLE FILLING STATIONS
KEY POINTS Encourages occupants to re-fill personal
water bottles
Countless configurations and finishes creates an opportunity for a designer to match any interior.
All stainless steel construction and sleek aesthetic design.
Fits in a 4” wall and is easily installed in both new construction and retrofits.
FEATURES All Stainless Steel Construction Fits in a 4” wall (models w/o heater or chiller) Choice of finish options No plastic parts No electricity used (models w/o chiller) Flush mount “soft-touch” filler valve Cup dispenser/disposal options Vandal proof options
B103 FILLING STATIONS
TYPICAL FINISH OPTIONS
TYPICAL CONFIGURATIONS
Ideal installation includes a Filtrine “ES” Chiller/Purifier Filling Stations can be used as a compliment to a traditional drinking
fountain, or on its own. Ideal for retrofit projects (does NOT require a drain or electrical outlet) Multiple FILLING STATIONS per floor…LET THE WATER DO THE
RUNNING!
TYPICAL INSTALLATIONS
Questions?For more Filling Station information…Visit: http://filtrine.com/drupal/filling_stationsOr email: [email protected]
Filtrine’s wide variety of drinking fountains and countless options, finishes, and accessories have long been the designer’s choice for some of the most prominent buildings in the world; including the UN Building (New York, NY), The National Gallery of Art (Washington, DC), and The White House (Washington, DC). Thoughtful design and attention to detail have made Filtrine fountains the best looking, most versatile, and longest-lasting fountains available.
DRINKING FOUNTAINS
KEY POINTS All fountains are made from heavy-duty 14 or 16
gauge, stainless steel or bronze…BUILT TO LAST!
Countless configurations and finishes enable designers to match any interior.
Glass filler options are available on every model.
TasteMaster Purifier options available on every model.
We encourage specifiers to generate “one-of-a-kind” ideas and allow us to make a customized fixture to suit their needs.
COMBINATION UNITS
NO
N-R
EC
ESS
ED
FO
UN
TA
INS
107-14
107-16
90
90-MOD
REC
ESS
ED
FO
UN
TA
INS
103
103MOD-HL
SEM
I-R
EC
ESS
ED
FO
UN
TA
INS
102
PED
ES
TA
L
FO
UN
TA
INS
125-CP 130-CP
Outdoor Use
Indoor Use
DEC
K
FO
UN
TA
INS
105-BL 121-HL
DECK DESIGNS offer virtually limitless possibilities for the design of attractive fountains. Deck fountains may bemade of almost any material including polymer aggregate, granite, marble, wood or glass. Bowls may be integral – matchingor complimentary with the deck, or non-integral and crafted from the wide choice of our standard bowl materials. Probablythe easiest way to create a custom designed fountain for your building, decks offer versatility, practicality and charm.
122-PA
ALC
OV
E
FO
UN
TA
INS
-ALC
ALCOVE DESIGNS make use of conventional fountains, such as our 107-16 designs, while placing them outside of the corridor. Either way, you can serve Filtrine water without sacrificing space.
*All models can be ADA compliant.*
OTH
ER
EX
AM
PLES
OF
DES
IGN
ER
FO
UN
TA
INS
107-MA 107-16-CP-OPA
130-PA
107-HL-WAVE
107-T
Questions?
For more Drinking Fountain information…Visit: http://filtrine.com/drupal/drinking_fountainsOr email: [email protected]
Filtrine Chiller/Purifiers are able to serve constant 50°F chilled water because, unlike conventional electric water coolers (EWC's), an ES Chiller/Purifier employs a large energy-saving, insulated reservoir. This allows the unit to build a reserve of chilled water during low usage periods to fill personal water containers and handle the peak demands of lunch hours, coffee breaks, etc. and still meet the low average draw. A single In-Wall unit uses less energy than multiple EWC’s serving a comparable population.
FILTRINE CHILLER/PURIFIERS
KEY POINTS Energy-saving (ES) design for low operating
cost
Storage-type evaporator holds a reserve of chilled/purified water for serving multiple outlets and higher volume containers.
Compact Design: In-wall, on-wall, and free-standing options.
Every chiller has a built-in TasteMaster™ Purifier for the best tasting and safest drinking water available.
3 WAYS TO CHILL AND SAVE ENERGYFiltrine “ES” Chiller/Purifiers range size and capacity from single outlet units to large remote
chillers, designed to circulate cool/purified water to an entire building.
POU Chiller/Purifiers (-FC & -FCC)
“In-Wall” Remote Chiller/Purifiers
Free-Standing Remote Chiller/Purifiers
-FC & -FCC POU CHILLER/PURIFIERS
Option available for any fountain or Filling Station model.
1. (FC-) indicates chiller without fan or grille.
2. (FCC-) indicates standard chiller with a fan and grille.
3. TasteMaster Purifier
4. Key lock available for added security
IN-WALL CHILLER/PURIFIERS
FEATURES
Easy to locate and install at any point on a circulating loop
Compact…as little as 9” depth required
Serve a population of (400) persons with (1) chiller
Quiet…engineered for indoor environments
Hinged core grille for easy access. No screws or tools.
Grille in choice of finishes to match any interior.
TasteMaster™ Purifier located inside cabinet on every chiller model.
IN-WALLREMOTE CHILLER/PURIFIER
SELECTION CHART
FREE STANDING CHILLER/PURIFIERS
FEATURES
Compact…uses little floor space…optional wall mount
Closed loop system thwarts tampering and enabled maximum security and system control.
Centralized maintenance out of sight in a mechanical room or closet.
Access panels on three sides to insure easy servicing
Sustainable design
TasteMaster™ Purifier located inside cabinet on every chiller model.
FREE-STANDINGREMOTE CHILLER/PURIFIER
SELECTION CHART
Questions?
For more Chiller/Purifier information…Visit: http://filtrine.com/drupal/chillersOr email: [email protected]
PARTICULATE FILTERS & TasteMaster™ PURIFIERS
For over century, Filtrine TasteMaster™ Purifiers have been famous for producing spring-like, taste-free drinking water. Now, this technology has been enhanced by incorporating carbon block elements with a micron rating down to 0.5 (removing lead and water-borne pathogens as well).
All models of Filtrine Filters and Purifiers are contained in a "bulletproof" housing utilizing a single, easy-to-change element.
POU Housings Typical IN-LINE Housings Typical POE Housings
EXCLUSIVE “DUAL SEAL” ELEMENTSENSURE ALL WATER IS TREATED FOR THE LIFE OF THE ELEMENT
Conventional cartridge-type filters depend upon compression of the cartridge top and bottom to effect a seal. However, tests indicate that the average cartridge loses some rigidity when wet, making it impossible to maintain this original seal.TasteMaster™ elements employ no compression. Instead, using an innovative “Dual Seal” design whereby the element slides over a center standpipe, they are sealed top and bottom by internal O-ringsto insure first-day effectiveness for the life of the element.
ELEMENT TYPES
POINT-OF-USE (POU)
POINT-OF-USE (POU)
IN-LINE (IL-)
IN-LINE (IL-)
POINT-OF-ENTRY (POE)
POINT-OF-ENTRY (POE)
POINT-OF-ENTRY (POE)
Questions?
For more Filter and Purifier information…Visit: http://filtrine.com/drupal/purifiersOr email: [email protected]