simrad autopilot, gyro compass and heading sensor solutions
TRANSCRIPT
PROFESSIONAL SERIES
WWW.SIMRAD-YACHTING.COM/PROFESSIONAL
Simrad Autopilot, Gyro Compass and Heading Sensor Solutions
Simrad Professional Autosteering and Gyro Compasses
S I M R A D P R O F E S S I O N A L
The Simrad Professional portfolio offers a comprehensive range of marine electronic products spanning instruments, autosteering,
gyro compasses, navigation systems, radar, communications and safety. Simrad Professional products are synonymous with
sophistication and rugged reliability, providing tried and trusted solutions for a wide range of professional applications. With more
than 60 years experience of developing quality products, Simrad are well positioned to meet the needs of today’s professional
mariners.
S I M R A D P R O F E S S I O N A L A U TO S T E E R I N G A N D GY R O C O M P A S S E S
Simrad autopilots are developed to provide commercial vessels, large yachts and megayachts with the highest standards of reliability
and the functionality needed in a professional environment.
The Simrad Gyro Compasses are the most reliable Gyro Compasses on the market and with no liquids to change every other year
like most other gyro compasses, they are virtually maintenance free.
2
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
T Y P I C A L S I M R A D P R O F E S S I O N A L A P 3 5 SYS T E M
RC25 Rate Compass
AP35 Control UnitAP35 Remote Control Unit
RGC50Gyro Compass
NSE GPS/Chartplotter
GI51 Gyro Interface
FU50 Lever
JS10 Lever
RI35 MK2 Rudder Angle
Indicator
S35 NFU Lever
J3XX
Boats Magnetic Compass
CDI35 Interface
RFC35 Fluxgate Compass
NMEA Heading Sensor
RF300 Rudder
Feedback
RF45X Rudder
Feedback
R3000X Remote Control
Reversible Pump
Solenoid Valve
System Components
System Variables
System Expansion
Basic System
AP35 AutopilotSolid, rugged and simple to operate with a dedicated WORK mode.
Simrad AP35 Autopilot is developed with the particular needs of the professional
mariner in mind. Fishing vessels will find a perfect partner in the AP35. The control
unit is made of solid marine grade aluminum, and the AP35 presents you with
features mentioned. Reliability is what counts after all. A full selection of remote
controls and steering levers is available.
A P 3 5 K E Y F E AT U R E S
Simple operation
Reliability
Dedicated WORK mode
Multistation capability
Interfaces to: Magnetic, fluxgate or gyrocompass
Optional Rate Compass
Radar Heading Interface
Simple operation with dedicated push buttons
and the innovative QS50 Quickstick operation
Part Number Description
000-10117-001 AP35 Pack 1 (AP35, J3000X, RF300, without heading sensor)
000-10118-001 AP35 Pack 2 (AP35, J300X, RF300, RC25)
000-10119-001 AP35 Pack 3 (AP35, J300X-40, RF300, RC25)
AP35 Autopilot
A P 3 5 B A S I C SYS T E M
AP35 Autopilot
RF300 Rudder Feedback
J3XXJunction Unit
RC25 Rate Compass
MX575A DGPS Compass
QS50
3
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
AP50 AutopilotThe Simrad AP50 offers the ultimate in autopilot performance
for vessels over 50 feet. More than 60 years of experience and
development is embedded in the most comprehensive of all pilot system
packages. It offers a wide range of controls, displays and interfaces
to build up a complete bridge steering system suitable for commercial
craft, super and mega yachts, power and sailboats. You will find all the
features you would expect from a true commercial pedigree.
The steering algorithms in the AP50 is the result of over 60 years of
steering experience. The special Auto Heading Capture is based on
experience with the offshore market. The AP50 will provide precise
steering, using the least amount of rudder movements necessary.
Save fuel and wear on the steering-gear with the Adaptive Sea state
Filter, Automatic rudder offset, Adaptive rudder deadband, Adaptive speed response, Second compass for course monitoring and
Adaptive pump speed.
The WORK mode of Simrad autopilots has been taken to an even higher level in the AP50 autopilot. The Auto Work mode
is an automatic steering mode to be used under operational conditions, different from those normally found when a vessel is
in normal transit on a pre-set course. Examples are trawling, towing, being towed, trolling on one engine, slow speed etc. As
GPS Chartplotters and Electronic Charting Systems (ECS) have become standard equipment on most vessels today, this Work
feature has now been implemented in the AP50 navigation mode resulting in a Nav Work mode. Combined with a bow-thruster,
navigational steering is now possible at low speeds previously considered unsuitable for autopilot use.
A P 5 0 K E Y F E AT U R E S
Excellent steering performance
Simple operation with dedicated push buttons
and the innovative QS50 Quickstick operation
Two complete sets of preprogrammable
steering parameters
Multiple combination of dual compass
Thruster control for improved low speed manoeuvring
Wheelmark approved including HSC, US
coastguard approved
AP50 Autopilot RF45X Rudder Feedback
J50 / J50-40 Junction Unit
GC80 / GC85 Gyro Compass
A P 5 0 B A S I C SYS T E M
Part Number Description
000-10122-001 AP50 Pack 1 (AP50, J50, RF300, RC25)
000-10121-001 AP50 Pack 2 (AP50, J50, RF45X, without heading sensor)
000-10120-001 AP50 Pack 3 (AP50, J50, RF300, without heading sensor)
AP50 Autopilot
4
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
T Y P I C A L S I M R A D P R O F E S S I O N A L A P 5 0 SYS T E M
Gyro CompassGC80/GC85
CS66 ECS /CS68 ECDIS NI300X RC25GI51 AP50 AP51 QS50AP50 FU50
GPS/Chartplotter(NSE, NX...)
Mains
Ext. Alarm
RI35 MK2
IS70 Rudder /IS80 Rudder
Reversible Pump
Solenoid Valve
RF300 RF45X RF14XU
Boats Magnetic Compass
CDI35CD100A
Radar CLK/Data
Non Simrad Compass
MX575A DGPS Compass
S35
J50/J50-40
TI51
JS10
AD50
Panorama MK2
R3000X S9
2-wire freq.
NMEA Data
Robnet
2-wire freq.
U C Popular Simrad features like
U-turn and C-turn
Use the QuickStick to maneuver
from the dock or mooring, point
and push the stick forward, and
head for your destination
The QS50 will, by a single press on
a button, also engage the thruster.
You can activate both rudder and
thruster or thruster only
5
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
AP50 Plus AutopilotWith the new range of distribution units, the AP50 Plus can interface with almost any magnetic compass, gyrocompass, steering
gear and navigation receiver. The new system is Wheelmark approved for commercial vessels including HSC.
AP50 Plus has been designed to produce very accurate steering under autopilot control. The autopilot has been programmed to learn how the rudder responds to commands. This both reduces rudder activity and ensures that the rudder is positioned exactly as required, so eliminating rudder overshoot. It also compensates for wear and play in the steering gear, which can be of particular importance when using AP50 Plus as a retrofit autopilot. Precise course keeping is guaranteed due to the ability to set all parameters on the AP50 Plus individually with a high level of fine tuning.
The AP50 Plus can be built up as a part of a complete steering system for all types of vessels. A combination of steering levers, rudder angle indicators and gyro repeaters can be used to create an integrated steering station on the bridge.
As an optional feature, the AP50 Plus can be configured to control a bow thruster. Rudders are inefficient at the slow speeds often required by dredgers and survey vessels. A vessel can, however, maintain an accurate heading by automatic control of a bow thruster through the AP50 Plus autopilot.
The configuration possibilities of Simrad autopilots, made by the selection of specific modules, will cover all applications, from small inshore fishing boats to large ferries and survey ships. Flexibility in system choice covers all retrofit applications.
The AP50Plus can be built up as a part of a complete steering system for all types of vessels. A conmbination of steering levers, rudder angle indicators and gyro repeaters can be used to create an integrated steering station on the bridge.
The AP51 portable remote control may simply be plugged in to the network and it is ready to use. The remote will provide total portable control over the autopilot system including direct thruster control.
With the QuickStickTM connected, the autopilot performance and functionality can be greatly enhanced. Features and benefits are easily available without having to be within reach of the AP50 main station.
A P 5 0 P L U S K E Y F E AT U R E S
Excellent steering performance
Simple operation with dedicated push buttons
and the innovative QS50 Quickstick operation
Two complete sets of preprogrammable
steering parameters
Multiple combination of dual compass
Interface to virtually any type of steering gear
Thruster control for improved low speed manoeuvring
Ruggedized Autopilot computer
Dual galvanic isolated analog output
Dual galvanic isolated solid state
19-40V DC / 110V DC / 110/220V AC output
Wheelmark approved including HSC.US coastguard
approved
AP50 Autopilot
A P 5 0 P L U S B A S I C SYS T E M
AP50
RF45X Rudder Feedback
JD5X Junction Unit
GC80 / GC85 Gyro Compass
RF14XU Rudder Feedback
OR
Part Number Description
000-10123-001 AP50+ Pack (AP50, JD53, without heading sensor)
6
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
T Y P I C A L S I M R A D P R O F E S S I O N A L A P 5 0 P L U S SYS T E M
Gyro CompassGC80/GC85
NI300XGI51 AP50 AP51 QS50AP50 FU50
24 VDC Mains
Ext. Alarm
RI35 MK2
IS70 Rudder / IS80 Rudder
Steering gear 1 Electronics
Steering gear 2 Electronics
RF45X RF14XU
Boats Magnetic Compass
CDI35CD100A
System Select
Non Simrad Compass
S35
TI51
JS10 Panorama MK2
R3000X S9
2-wire freq.
NMEA Data
Robnet
JD5X
Radar CLK/Data
2-wire freq.
MX575A DGPS Compass
GPS/Chartplotter(NSE, NX...)
D I S T R I B U T I O N U N I T S F O R S T E E R I N G G E A R S :
J D 5 0 Solid state switching of 2 independent
sets of directional valve solenoids.
19-40V DC, 3A
J D 5 1 110V DC, 1A
J D 5 2 110/220V AC, 1A
J D 5 3 Two galvanic isolated output control
signals of +/- 10V DC, 4-20 mA or a
control signal that can be adjusted within a
certain range of an input reference voltage.
CS66 ECS /CS68 ECDIS
7
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
RemotesQ S 5 0 R E M OT E C O N T R O L U N I T
With the QuickStickTM connected, the autopilot performance and functionality can be greatly enhanced. Features and benefits are easily available without having to be within reach of the AP50 main station.
• NFU steering with automatic Centring of rudder
• Rudder and thruster control
• Mode selection
• Course change
• Heading capture
• Status LEDsStatus LEDs adapted to day and night vision monitor the operation and flash a warning if particular attention is required. QuickStick is weather and water proof for outdoor operation.
A P 5 1 R E M OT E C O N T R O L
The AP51 portable remote control may simply be plugged into the network and it is ready to use. The remote will provide total portable control over the autopilot system including direct thruster control.
S 3 5 S T E E R I N G C O N T R O L
NFU steering lever. Two sets of micro switches. Illuminated mode button provides power steering or course change. Outdoor mounting; IP56 (splash proof) protection.
S 9 S T E E R I N G C O N T R O L
NFU Steering lever. For indoor/outdoor, panel/bulkhead mounting. Can operate solenoids directly. Facility for priority steering and mode change on AP50 autopilots. Lever mid-position has lock mechanism.
QS50 Remote Control
S35 Steering Control
S9Steering Control
Part Number Description
22089494 QS50 Controller: 2-axis joystick for armrest and flush mounting. Mode change (except into Nav), NFU with quick rudder center function, and course change in Auto mode. Note: QS50 does not provide FU steering
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
Part Number Description
23241227 S35 Non Follow Up Steering Lever: Spring loaded. Designed for indoor/outdoor mounting. Illuminated mode button.
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
Part Number Description
23601800 S9 Steering Lever (NFU): Indoor/outdoor panel bulkhead mounting. Can operate solenoids directly. Facility to change mode on autopilot.
Part Number Description
20214052 AP51 Remote Control: With standard mounting kit
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
AP51Remote Control
8
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
F U 5 0 F O L LO W - U P S T E E R I N G L E V E R
The FU50 Follow-up steering lever features a unique non linear dial (scale) to allow precise rudder control around rudder mid position, with 5° rudder angle markings. The rudder will move and stop at the angle selected on the dial. The FU50 has a mid-position indent, buttons for (limited) mode selection, and mode indicators (STBY, FU, AUTO, NAV, WORK, and THRUSTER). It is designed for indoor and outdoor bulkhead- or panelmounting.
R I 3 5 M K 2
The RI35 Mk2 Rudder Angle Indicator gives a continuous reading of the rudder position up to 45 degrees on either side of the amidships position.Designed to operate from frequency or current input signals, generated by a Simrad autopilot feedback unit, the RI35 Mk2 will also accept a NMEA 0183 rudder angle (RSA) signal.Manufactured in noncorrosive aluminium with a nonreflective black finish, the instrument is a standard modular size (132 x108 mm) to match the Simrad AP35 autopilot. A front panel key is used for illumination and setup. The splash proof construction allows panel, bulkhead or bracket mounting in
exposed locations, such as bridge wings as well as wheel house and engine room.
P A N O R A M A R A I ( R U D D E R A N G L E I N D I C ATO R )
The Panorama Mk2 Rudder Angle Indicator is designed for overhead mounting on the bridge. The splash proof ABS/PC blend
cabinet contains 3 identical scales, for accurate reading of rudder angles from any position in the wheel-house. The indicator is
designed for rudder angles up to 45 degrees on either side of midship position.
RI35 Mk2 Rudder Angle Indicator
FU50 Follow-up Steering Lever
Part Number Description
20214037 FU50 Follow Up Steering Lever; with mode buttons for FU, STBY and AUTO for indoor/outdoor mounting. Illuminated mode indicators. For use with AP35 and AP50 only.
20214375 FU50 Flush Mount Kit NEW: For use with the upgraded FU50 steering levers. Fits FU50 rev EA and higher. 144mm x 144mm aluminum matches size of RI9.
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
Part Number Description
22085146 RI35 MkII Rudder Indicator. RI35MK2 Rudder Angle Indicator; Designed for indoor/outdoor mounting. Operates with RF300, or RF45X feedback units. Maximum of four units if operated on frequency; two units if operating on current.
Part Number Description
22060966 Panorama U45 Rudder Indicator. Panorama Mk2 (45°-0-45°). 3-way indicator. For overhead mounting. Adjustable dial light. 24 V. “U” version for voltage input. Works with RF14XU only
Panorama U45 Rudder Angle Indicator
9
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
Drive UnitsR P U 8 0 , R P U 1 6 0 A N D R P U 3 0 0 R E V E R S I B L E P U M P
Hydraulic steering systems are now being used in every category of vessel. In many respects hydraulic steering is preferable to mechanical steering. Hydraulic systems normally comprise of two main components, a steering wheel pump and steering cylinder(s). The steering wheel pump may be either a gear pump or a plunger pump. Which ever type is installed, steering is achieved by turning the steering wheel in either direction causing oil from the wheel pump to be supplied to the appropriate side of the cylinder. Oil is returned via the opposite side of the cylinder back to the pump.The linear motion of the cylinder rod is transformed to a rotary motion by the tiller, which turns the rudder shaft and rudder. Check valves (non-return valves) are usually incorporated to prevent the rudder driving the steering wheel pump. If an autopilot is to be included in such a hydraulic steering system, then the oil flow providing the rudder movement must be controlled by electrical signals from the autopilot. The maximum flow rate of RPU80, RPU160 and RPU300 is 0,8 l/min., 1,6 l/min. and 3,0 l/min. respectively, measured at a pressure of 10 bar with nominal voltage (12 VDC) on the motor terminals.
R P U 8 0 R E V E R S I B L E P U M P
R P U 1 6 0 R E V E R S I B L E P U M P
R P U 3 0 0 R E V E R S I B L E P U M P
RPU80
RPU160
RPU300
Rudder Feedback UnitsR F 1 4 X U R U D D E R F E E D B A C K U N I T
The rudder feedback unit transmits a signal proportional to the rudder angle. It is mounted close to the rudder stock and is mechanically connected to the rudder by a transmission link in a 1:1 ratio.The RF14XU Rudder Feedback Unit consists of a glass reinforced non-flammable polyester housing with a mounting plate of sea-water resistant aluminium. It contains a potentiometer, limit switches and an electronic drive module. Output is either a voltage varying ±9 volts around half the supply voltage, or a frequency signal with 3400 Hz for use with a Simrad autopilot. The shaft of the Feedback Unit is free to travel 360 degrees, but only ±90 degrees from midposition are used for signal control. RF14XU is equipped with two sets of micro switches, which can be used as electrical limit switches for the steering gear. Rudder Indicator Compatibility
Rudder Feedback
Unit IS80/IS70 Rudder
RI35 Mk2 Panorama
RF14XU • • •RF45X •RF300 •
Part Number Description
21116165 RPU-80: Reversible Pump for cylinder size 80 - 200 cu.cm. (4,9 – 12,2 cu.in.)
Part Number Description
21118203 RPU-160: Reversible Pump for cylinder size 160 - 400 cu.cm. (9,8 – 24,4 cu.in.)
Part Number Description
21118211 RPU300-12 V: Reversible Pump. For cylinder size 320 – 740 cu.cm. (19,5 – 45,2 cu.in.)
21118476 RPU300-24 V DC: Reversible Pump. For cylinder size 320 – 740 cu.cm. (19,5 – 45,2 cu.in.)
RF14XU
Part Number Description
22506950 RF14XU Heavy Duty Feedback Unit; Long life feedback unit with transmission linkage. Separate output for rudder angle indicators. Double set of limit switches. Requires 24VDC supply voltage.
10
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
RF300 Rudder Feedback
Heading SensorsC D 1 0 0 A C O U R S E D E T E C TO R
Magnetic compass course detector to be mounted under the boats own compass. Used together with CD135.
C D I 3 5 D E D I C AT E D M A G N E T I C C O M P A S S I N T E R FA C E U N I T
The CDI35 is used with CD100A only. It converts the Sine/cosine signal from CD100A into a two-wire pwm signal, similar to the
RFC35 Compass. Also used with AP35.
R C 2 5 R AT E C O M P A S S
The Simrad RC25 Rate Compass is used with AP35 and AP50 (Robnet). Fluxgate compass with
integrated rate of turn sensor. Utilizes a solid state rate sensor and a magnetic fluxgate sensor. Provides a
dramatic improvement to the dynamic performance of both the autopilot and a stabilized radar display.
R F C 3 5 F L U XG AT E C O M P A S S
Simrad RFC35 Fluxgate Compass can be used with AP35 and AP50 (Two wire pwm)
RC25
R F 4 5 X R U D D E R F E E D B A C K U N I T
The RF45X is a medium duty rudder feedback unit. It is a repairable rather than a potted “throw
away” item. The RF45X has “universal” frequency output which can be used with both AP35 and
AP50, and the older AP45 and AP9 without the use of internal jumpers.
R F 3 0 0 R U D D E R F E E D B A C K
The RF300 is a medium duty rudder feedback unit which connects directly to the Autopilot
Pilot Computer using 2 wire frequency interface.
RF45X
Part Number Description
22011415 RF45X Rugged rudder Feedback Unit; with transmission link and 2m Cable.
Part Number Description
20193744 RF300 Rudder Feedback Unit: with transmission link and 10m Cable.
RFC35
Part Number Description
20106688 CD100A Course Detector; with 5m. Cable. Magnetic course detector with tripod holder for overhead and for conventional magnetic compass.
Part Number Description
22087001 CDI35 Course detector interface. Interface unit to connect autopilot to magnetic compass with CD100A or CD109 course detector.
Part Number Description
22084438 RC25 Rate compass; High performance fluxgate compass with integrated rate gyro provides more stable heading, with 15 m cable
Part Number Description
22086995 RFC35 Electronic fluxgate compass; with 15 m cable
11
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
GC80 and GC85 GyrocompassesThe Simrad Gyro Compasses are the most reliable Gyro
Compasses on the market and with no liquids to change every
other year like most other gyro compasses, they are virtually
maintenance free. A wide range of control units provide complete
flexibility of system configuration for new installation and easy
retrofit into existing repeater systems. The standard range of
interfaces can easily be expanded to provide signals for all vessel
applications. The distribution of power and heading signals from
the control units enables practical installation and easy retrofit.
The unique technology in the GC85 and GC80 gyrocompasses
eliminates “practically” the need for annual service. The GC85 and
GC80 are fully IMO approved for standard and High Speed Craft
(GC85) and can be configured in a dual gyrocompass system.
The highest possible accuracy and stability is provided from new
technology, by sophisticated and fully sealed sensitive element.
The Simrad GC85 and GC80 gyrocompasses are the ideal
solutions for the advanced DP system needed in offshore industry. Shipowners as well as DP system providers all over the world
have learned that the Simrad GC series gyrocompass offers the most flexible gyro compass solution on the market. A combination
of a Dual- and an Expanded system, consisting of all together three gyro compasses will offer a DP vessel all the heading and
control information needed for effective operations under the most harsh conditions. The simple and quick installation and set-up
process as well as the fact that no annual service is required makes a Simrad gyro system the best solution for any 24/7 operator.
The world wide service and warranty network ensures extra support whenever needed.
G C 8 0 A N D G C 8 5 K E Y F E AT U R E S
Unique, new technology, sensitive elements require no
annual servicing
Very low RPM reduces wear and increases lifetime
Swappable sensitive elements for onboard service
No oil change and quick installation
Sealed sensitive element
High follow-up rate
Full 2 year warranty
GC80 approved according to IMO A.424(XI) performance
standards for gyro-compasses
GC85 approved according to IMO A821(19) performance
standards for gyro-compasses for high speed craft
Part Number Description
27101617 GC80 Compact Gyro system
GC80 Exp Sys GC80 Expanded Gyro System
GC80 Dual Sys GC80 Dual Gyro System with changeover switch
GC85 Comp Sys GC85 Compact Gyro System
GC85 Exp Sys GC85 Expanded Gyro System
27102169 Second GC80 Master Compass and GC80 Sensitive Element
27102177 Second GC85 Master compass including sensitive element
GC85 Gyrocompass
GC80, GC85 and RGC50 Gyrocompasses
Compact EXpanded Dual
C O N T R O L U N I T S
12
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
RGC50 Compact GyrocompassThe small, compact ”all in one” RGC50 Gyrocompass is designed for smaller vessels and non-
IMO applications.
The RGC50 is a compact gyrocompass, designed to enhance the navigation capabilities on
small commercial, fishing vessels, and large pleasure yachts. A gyrocompass eliminates the
inconvenience and limitations of magnetic compasses, and provides a variety of electrical
outputs to supply accurate and consistent heading information to other navigation equipment.
The capabilities and precision of the RGC50 will provide exceptional heading information to the
navigation equipment installed on your vessel.
RGC50 Compact Gyrocompass
Part Number Description
27102185 RGC50 Gyrocompass for small vessels. Built in timer.
000-10124-001 RGC50 Pack (RGC50, GI51)
G C 8 0 / 8 5 B A S I C SYS T E M
Control Unit
GC80 / 85 Gyro Compass SimNet
NMEA 0183
AR81 Bearing Repeater
HR80 Heading Repeater
RepeaterA R 8 1 B E A R I N G R E P E AT E R
A full range of analog and digital repeaters are available for all vessel applications. Analog, digital and bearing repeaters can be used with all Simrad gyrocompasses. All repeaters are water resistant for external use.
AR81 Bearing Repeater
SimNet
WhiteBrownYellowGreen
Rx+, ARx-, BTx+, ATx-, B
From NMEA"Talker"
To NMEA"Listener"
SimNet
UP
AT10HD Converter
Part Number Description
24005936 AT10 Two way general NMEA 0183 to SimNet converter
27107523 HR80 Heading repeater
Part Number Description
27101732 AR81 Single scale Bearing Repeater NMEA. To be mounted in BB holder, MB Holder or BH stand. IMO A424. Wheelmark approved for GC80/ 85 gyro systems
13
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
MX575A DGPS CompassThe MX575A D/GPS compass is designed to provide the
Simrad Professional Autopilots, MX5XX Series navigation
and AIS systems with reliable heading, ROT (Rate of Turn)
and position information. The MX575A delivers a heading
accuracy of better than 0.5° at update rates of up to 10
Hz. It also provides sub-meter DGPS positioning accuracy
at rates of up to 5 Hz when using RTCM correction data
supplied from internal beacon demodulator.
To augment the GPS-derived heading, the MX575A
includes other supplemental devices. The combination
of inclinometer and magnetic sensing devices aid the rate at which a heading solution is computed on startup and also speeds
up reacquisition. A rate gyro provides a secondary source of heading data in times when the GPS heading is not available due to
temporary obstructions. These sensors improve performance and increase dependability of the MX575A. The MX575A features
two independent RS-232 serial ports and one RS-422 port. Either RS-232 port may be configured freely for a variety of NMEA
0183 output sentences or for the input of RTCM correction data from an external source. The output of the RS-422 port mirrors
that of one RS-232 port. It also features COAST™ technology that allows it to use old correction data for up to 40 minutes without
seriously affecting positioning performance. This feature offers peace of mind and allows you to focus on more important issues
than reliability of a differential signal.
M X 5 7 5 A K E Y F E AT U R E S
Type-Approved as a Transmitting Heading Device (THD)
and a Primary Positioning Device
Compatible with MX5XX family of CDUs
Stand-alone automatic operation
Heading accuracy of 0.5°
Heading updates up to 10 Hz
Integrated DGPS sources including WAAS, EGNOS, and
Beacon
Sub-meter DGPS accuracy
Fast start-up times
Sustained tracking during Rates of Turn up to 90º/s
Sealed enclosure with IP 67 rating
NMEA 0183 V3.0 interface with provision for
external RTCM SC-104 corrections
MX575A DGPS Compass
Part Number Description
9525-200-80900 MX575A DGPS Compass with 15M Cable
M X 5 7 5 A B A S I C SYS T E M
SimNet
NMEA 0183
MX500 / 510 Junction Box
MX500 / 510 Head Unit
MX575A DGPS Compass
SimNet
WhiteBrownYellowGreen
Rx+, ARx-, BTx+, ATx-, B
From NMEA"Talker"
To NMEA"Listener"
SimNet
UP
AT10HD Converter
14
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
216 mm (8.5")
108
mm
(4.2
")
Technical Specifications
A P 3 5 A P 5 0 A P 5 0
P L U S
Multi-language display • • •
Transflective matrix LCD 70x29mm 102x83mm 102x83mm
Analog presentation • •
Rudder angle bargraph • • •
Adjustable backlight • • •
Dedicated mode keys • • •
Course change, rotary knob • • •
Course change keys,±1/5/10°Dedicated/Selectable
Dedicated 1° Selectable 1°, 5 ° or 10°
Selectable 1°, 5 ° or 10°
Heading capture in turns • •
Rate/radius turn control • •
Work mode • • •
DODGE, resume of previous heading • • •
U-turn, C-turn • • •
NFU/FU Power steering • • •
Automatic tuning (Autotune) • • •
Seastate and parameter speed control(Automatic/Manual)
A/M A/M A/M
Rudder deadband adjust (Adaptive/Manual)
A A/M A/M
Rudder angle calibration • • •
Multiple stations • • •
Remote station lock • • •
Master station operation • •
Solenoid or reversible motor control interface
• • •
Galvanic isolated solenoid or analog control (AD50) interface
•
Dual galvanic isolated solenoid or analog control interface
•
Thruster Control (TI51) • •
Multiple compass input • • •
Multiple NMEA 0183 input/output • • •
System selector interface (manual/automatic steering)
• •
Off course alarm • • •
Compass difference alarm • •
System monitoring alarms • • •
Remote alarm station interface option (NAUT-OSV class)
• •
IMO - High Speed - Wheelmark - USCG approved
• •
A P 3 5 , A P 5 0 A N D A P 5 0 P L U S S P E C I F I C AT I O N S
87 mm (3.4")
36mm (1.4")
144
mm
(5.7
”)
252 mm (9.9”)
152
mm
(6.0
”)
25.5 mm (1.0”)
37 mm (1.5”)
57.5
mm
(2.3
”)
A P 3 5
A P 5 0
15
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
A P 3 5 C O M P AT I B L E A C C E S S O R I E S
Part Number Description
22085112 J3000X Junction unit: One NMEA0183 input and output port. Heading out at 4 Hz. Controls reversible drive units and solenoid activated steering systems drawing up to 6 A. (continuous load) 12 or 24 V DC only
22085120 J300X Junction unit: Two NMEA0183 input and output ports. Supplies 10 Hz. heading output from Tx. port 2. Radar clock/data interface. External alarm. Controls reversible drive units and solenoid activated steering systems drawing up to 10 A. (continuous load) 12/24/32 V DC
22085138 J300X-40 Junction unit: Two NMEA0183 input and output ports. Supplies 10 Hz. heading output from Tx. port 2. Radar clock/data interface. External alarm. Controls reversible drive units and solenoid activated steering systems drawing up to 20 A. (continuous load) 12/24/32 V DC
22084438 RC25 Rate compass; High performance fluxgate compass with integrated rate gyro provides more stable heading, with 15 m cable
22086995 RFC35 Electronic fluxgate compass; with 15 m cable
22087001 CDI35 Course detector interface. Interface unit to connect autopilot to magnetic compass with CD100A or CD109 course detector.
20106688 CD100A Course Detector; with 5m. Cable. Magnetic course detector with tripod holder for overhead and for conventional magnetic compass.
9525-200-80900 MX575A DGPS Compass with 15M Cable
Parts included:
MX575A DGPS Compass Sensor
MX575A Power/Data 15m Cable
MX575A Manual
MX575A Pole Mount
MX575A Fixed Mount
MX575A Mounting Kit
27102185 RGC50 Gyrocompass for small vessels. Built in timer. Including RGC50 Master compass and RGC50 Sensitive element
20213773 GI51 Gyro Interface; Mains 12-40VDC. Input – synchro (1:1 and geared), 20 – 70 VDC step signal, and NMEA0183. Outputs – NMEA0183 (per source- HDT, HDG, ROT). Simrad clock data, 24VDC step, sine/cosine (2.5VDC reference).
20193744 RF300 Rudder feedback unit: with transmission link and 10 m cable
22011415 RF45X Rugged rudder feedback unit; with transmission link and 2 m cable
21116165 RPU80; Reversible Pump. For cylinder displacement of 80-200 cm3
21118203 RPU160: Reversible Pump. For cylinder displacement of 160-400 cm3
21118211 RPU300-12 V: Reversible Pump. For cylinder displacement of 320 - 740 cm3 (requires J300X-40)
21118476 RPU300-24 V DC: Reversible Pump. For cylinder displacement of 320 - 740 cm3
22082929 AP35 Standard mounting kit
22089536 NI300X NMEA 0183 Interface Unit; For installations requiring additional NMEA ports. Features 4 NMEA Rx/Tx ports, 1 AD10 type heading output port. Order required length Robnet cable separately.
22085146 RI35MK2 Rudder Angle Indicator; Designed for indoor/outdoor mounting. Operates with RF300, or RF45X feedback units. Maximum of four units if operated on frequency; two units if operating on current.
20214037 FU50 Follow Up Steering Lever; with mode buttons for FU, STBY and AUTO for indoor/outdoor mounting. Illuminated mode indicators. For use with AP35 and AP50 only.
16
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
Part Number Description
20214375 FU50 Flush Mount Kit: For use with the upgraded FU50 steering levers. Fits FU50 rev EA and higher. 144mm x 144mm aluminum matches size of RI9.
23241227 S35 Non Follow Up Steering Lever: Spring loaded. Designed for indoor/outdoor mounting. Illuminated mode button.
22088165 JS10 Non Follow Up Steering Lever: Two position NFU lever for indoor/outdoor mounting.
22022446 R3000X Hand-held Remote: with 7m. cable and mounting bracket. Provides NFU steering in STBY and Dodge modes, course changing in Auto mode.
22089494 QS50 Controller: 2-axis joystick for armrest and flush mounting. Mode change (except into Nav), NFU with quick rudder center function, and course change in Auto mode. Note: QS50 does not provide FU steering
A P 5 0 A N D A P 5 0 P L U S C O M P AT I B L E A C C E S S O R I E S
Part Number Description
20214011 “J50 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Controls reversible drive units drawing up to 10A (continuous load) and solenoid activated steering system up to 3A (isolated output). Wheelmark approved for AP50 systems
20214029 J50-40 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Controls reversible drive units drawing up to 20A (continuous load).
20126819 "JD50 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through solid state switching of two independent sets of directional solenoid valves. 19-40VDC,3A. Wheelmark approved for AP50 systems.
20126827 "JD51 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through solid state switching of two independent sets of directional solenoid valves. 110VDC, 1A. Wheelmark approved for AP50 systems.
20126835 "JD52 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through solid state switching of two independent sets of directional solenoid valves. 110/220VAC, 1A. Wheelmark approved for AP50 systems.
20126843 "JD53 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through two galvanic isolated output control signals of +/-10VDC, 4-20mA., or a control signal that can be adjusted within a certain range of an input reference voltage. Wheelmark approved for AP50 systems
20214292 Optional Dual Analog board for NAUT-OSV alarm interface in JD5X.
22084438 RC25 Rate Compass; Fluxgate compass with integrated rate gyro provides more stable heading. With 15m. Cable
22086995 RFC35 Electronic Fluxgate Compass; with 15m. cable. Note: Not recommended as primary steering compass for larger vessels. Can be used as back up/Monitor compass.
22087001 "CDI35 Course detector interface; Interface unit to connect autopilot to magnetic compass with CD100A or CD109 course detector. Wheelmark approved for AP50 systems.
20106688 "CD100A Course Detector; with 5m. cable. Magnetic course detector with tripod holder for overhead and for conventional magnetic compass. Wheelmark approved for AP50 systems
27102185 “RGC50 Gyrocompass for small vessels. Built in timer. Including RGC50 Master compass and RGC50 Sensitive element
17
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
Part Number Description
20213815 GI51 pendulum ferry feature
22011415 "RF45X Rugged rudder Feedback Unit; with transmission link and 2m Cable. Wheelmark approved for AP50 systems.
22506950 "RF14XU Heavy Duty Feedback Unit; Long life feedback unit with transmission linkage. Separate output for rudder angle indicators. Double set of limit switches. Requires 24VDC supply voltage. Wheelmark approved for AP50 systems.
20193744 "RF300 Rudder Feedback Unit: with transmission link and 10m Cable. Wheelmark approved for AP50 systems.
21116165 RPU80; Reversible Pump. For cylinder displacement of 80-200 cm3
21118203 RPU160: Reversible Pump. For cylinder displacement of 160-400 cm3
21118211 RPU300-12 V: Reversible Pump. For cylinder displacement of 320 - 740 cm3 (requires J300X-40)
21118476 RPU300-24 V DC: Reversible Pump. For cylinder displacement of 320 - 740 cm3
20212130 AP50 Optional Mounting Bracket
22089189 "TI51 Thruster Interface: Provides signal for operating one thruster by on/off solenoid, continuous control or Dantoss PVEM valve. Order required length Robnet cable separately. Wheelmark approved for AP50 systems.
20213088 "AD50 Analog Drive: The AD50 provides Analog or Proportional control of a rudder, by either continuous voltage, or Danfoss PVEM valve signal. Set-up from AP50 Control Unit and communicates via RobNet. Please note that a ± 10V controlled rudder requires no rudder feedback unit. Order required length Robnet cable separately. Wheelmark approved for AP50 systems.
22085146 RI35 Mk2 45°-0-45° Rudder angle indicator. Operates on RF300, RF45 and RF45X feedback units. Adjustable illumination. IP56 (splashproof) protection. Can be used as stand-alone with RF45X independent of an autopilot. 12/24V DC. 20 m cable included. Wheelmark approved for AP50 systems.
22060966 Panorama Mk2 (45°-0-45°). 3-way indicator. For overhead mounting. Adjustable dial light. 24 V. "U" version for voltage input. Works with RF14XU only
20214052 AP51Remote Control: With standard mounting kit. Wheelmark approved for AP50 systems.
22086433 JP21 Bulkhead Socket: For connection of AP51. Supplied with 7m cable.
22022446 R3000X Hand-held Remote Control: With 7m cable and mounting bracket. Provides NFU steering in STBY and Dodge modes plus course changing in auto mode. Wheelmark approved for AP50 systems.
22089494 QS50 Controller: 2-axis joystick for armrest and flush mounting. Mode change (except into Nav), NFU with quick rudder center function, and course change in Auto mode. Note: QS50 does not provide FU steering
22089734 Outdoor Mount: Designed for QS50 to fit inside of, for waterproof mounting in exposed locations.
20214037 FU50 Follow Up Steering Lever; for indoor/outdoor mounting. Illuminated mode indicators. Wheelmark approved for AP50 systems.
20214375 FU50 Flush Mount Kit NEW: For use with the upgraded FU50 steering levers. Fits FU50 rev EA and higher. 144mm x 144mm aluminum matches size of RI9.
18
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
J 5 0 J 5 0 - 4 0
Supply Voltage 10-40 V 10-40 V
Reverse voltage protection Yes No
Solenoid/Motor drive (continuous/peak) 10/20 A 20/40 A
Solenoid, external supplied •
Total no. of Robnet control units Up to 10 Up to 10
NMEA ports (in/out) 2 2
Input for NFU control • •
External alarm • •
Radar clock / data interface • •
System select Autopilot / Main steering • •
A P 5 0 S TA N D A R D J U N C T I O N U N I T S S P E C I F I C AT I O N S
M O D E L M OTO R
V O LT S
A U TO P I LOT
C O M P U T E R
R A M C A P A C I T Y F LO W R AT E
AT 1 0 B A R
C M 3 / M I N
( C U . I N / M I N )
M A X
P R E S S U R E
B A R
P W R .
C O N S U M P T I O N
B O AT
L E N G H TM I N C M 3
( C U . I N . )
M A X C M 3
( C U . I N . )
RPU80 12V AC10
J3000X
80
(4.9)
250
(15.2)
800
(49)
50 2.4-6 A <35ft
RPU160 12V AC20
J300X
160
(9.8)
550
(33.5)
1600
(98)
60 3-10 A 35-50ft
RPU300 12V AC40
J300X-40
290
(17.7)
960
(58.5)
3000
(183)
60 5-25 A 50-70ft
RPU300 24V AC20
J300X
290
(17.7)
960
(58.5)
3000
(183)
60 2.5-12 A 50-70ft
R E V E R S I B L E H Y D R A U L I C P U M P S P E C I F I C AT I O N S
Part Number Description
23601800 S9 Steering Lever (NFU): Indoor/outdoor panel bulkhead mounting. Can operate solenoids directly. Facility to change mode on autopilot. Wheelmark approved for AP50 systems.
23241227 S35 NFU Spring loaded Steering Lever: Indoor/outdoor mounting, Hard wired to the junction box. Illuminated mode button. Wheelmark approved for AP50 systems.
22088165 JS10 Steering lever (NFU): Remote for indoor/outdoor flat panel mounting. Includes 2m cable. Wheelmark approved for AP50 systems.
A R 8 1 S P E C I F I C AT I O N S
E N V I R O N M E N TA L
Mounting: Dedicated holders or stand
Diameter: 246.3 mm \ 9.7 in
Depth: 187 mm \ 7.4 in
Weight: 4.5 kg \ 9.92 lbs
P O W E R
Power Supply: 24V DC vDC
OT H E R
Cable: 1.8 m
Compass Safe Distance: 500 mm \ 19.7 in
Operating Temperature: -20°C to +60°C
19
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
D ATA O U T P U T S R G C 5 0 C O M P A C T
O P T I O N A L A C
( P O W E R S U P P LY
F O R C O M P A C T )
E X P A N D E D D U A L
Stepper 1 *1 1 x 24V4 x 24V (option 2
x 35 V)4 (option 2 x 35V)
Serial (NMEA) 1 *1 4 (option 9) 10 (option 15) 10 (option 15)
Syncro 1:1 100V/400Hz
Repeater back-up 1 + 4 4 + 10 4 + 10
Rate of turn 3 3
Weight 7 kg 9 kg 16 kg 23 kg
Data inputs
Serial (GPS) 1 1 1
Serial (External Heading) 1 1 1
Serial (LOG) 1 1 1
Pulse (LOG)1 (200/400p p/
nm)
1 (200/400p p/
nm)
1 (200/400 p
p/nm)
P O W E R
Power supply 24V DC 24V DC110/220V AC 50
/60Hz
110/220V AC 50
/60Hz
110/220V AC 50
/60Hz
Backup supply 24V DC 24V DC 24V DC
Current consumption startup (A) 5A 3.3A 1.4A incl.
Compact 1.5A 1.7A
Current consumption normal (A) 2A 2.6A 1.1A incl. Compact 1.2A 1.4A
R G C 5 0 , G C 8 0 A N D G C 8 5 S P E C I F I C AT I O N S
R G C 5 0 G C 8 0 G C 8 5
Setting time < 4h < 3h < 3h
Pitch/Roll angle +/- 45 deg +/- 45 deg +/- 45 deg
Follow-up rate > 36 deg/sec > 75 deg/sec > 75 deg/sec
Weight 15.5 kg 23 kg 23 kg
Type approval Wheelmark IMO: A424 (XI), A694 (17)IEC: 60945, 61162 ISO: 8728 (1997)
Wheelmark IMO: MSC97 (73), 13.2.6 (2000 HSC Code) IEC: 60945, 61162 ISO: 6328 (2001)
A C C U R A CY
Settle point error (x secant latitude) Less than -1.8deg ± Less than -0.1deg ± Less than -0.1deg ±
Static error (x secant latitude) Less than -1.0 deg ± Less than -0.1 deg ± Less than -0.1 deg ±
Dynamic error (x secant latitude) Less than -1.8 deg ± Less than -0.4 deg ± Less than -0.4 deg ±
range of speed correction 0-50 knots 0-70 knots
Horizontal acceleration 1m/s2 2m/s2
Annual maintenance Not required Not required Not required
Warranty period 2 years 2 years 2 years
20
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
G C 8 0 A N D G C 8 5 S P E C I F I C AT I O N S
BOW
AREASERVICE
AREASERVICE
AREASERVICE
AREASERVICE
BOW
mm
mm
mm
mmmm mm
mm
mm
mm
mm
mm
mm
mm mm
BOW
AREASERVICE
AREASERVICE
AREASERVICE
AREASERVICE
BOW
mm
mm
mm
mmmm mm
mm
mm
mm
mm
mm
mm
mm mm
BOW
AREASERVICE
AREASERVICE
AREASERVICE
AREASERVICE
BOW
mm
mm
mm
mmmm mm
mm
mm
mm
mm
mm
mm
mm mm
G C 8 0 A N D G C 8 5 C O M P A C T SYS T E M
mm
mm
mmmm
mm
mm
mm
mm
mm
mmmm
mm
mm
mm
mm
mm
mm
mm
mmmm
mm
mm
mm
mm
mm
mmmm
mm
mm
mm
mm
mm
mm
mm
mmmm
mm
mm
mm
mm
mm
mmmm
mm
mm
mm
mm
mm
BOW
AREASERVICE
AREASERVICE
AREASERVICE
AREASERVICE
BOW
mm
mm
mm
mmmm mm
mm
mm
mm
mm
mm
mm
mm mm
21
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
mm
mm
mm
mm
mm
mmmmmm
mm
mm
mm
mmmmmm
mm
mm
mm
mm
mm
mm
mmmmmm
mm
mm
mm
mmmmmm
mm
G C 8 0 A N D G C 8 5 E X P A N D E D SYS T E M
mm
mm
mm
mm
mm
mmmmmm
mm
mm
mm
mmmmmm
mm
G C 8 0 A N D G C 8 5 D U A L SYS T E M
1 1
mm
mm
mm
mm
mm
mm
mm
mm
mm
mmmm
1 1
mm
mm
mm
mm
mm
mm
mm
mm
mm
mmmm
1 1
mm
mm
mm
mm
mm
mm
mm
mm
mm
mmmm
228 mm (9.3”)
37
7 m
m (
15
”)
32
1 m
m (
12
.6”)
R G C 5 0 S P E C I F I C AT I O N S
22
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
G P S / N AV I G AT I O N
GPS Receiver Channels: 12 channels
DGPS: Receiver Type L1, C/A code, with carrier phase
smoothing
DGPS: Position Update Rate 1 Hz default (Position) up to 10 Hz
heading output
DGPS: Horizontal Accuracy < 1 m 95% (DGPS), < 5 m 95%
(autonomous, no SA)
DGPS: Heading Accuracy < 0.5 degrees rms
DGPS: Rate of Turn 90°/s max
DGPS: Pitch / Roll Accuracy < 1 degree rms
DGPS: Start-Up Time < 60 s typ.
DGPS: Heading Fix < 20 s
DGPS: Satellite Reacquisition < 1 s
DGPS: Frequency Range 283.5 to 325 kHz
DGPS: Adjacent Channel
Rejection
61 dB @ f° +/- 400 Hz offset
OT H E R
Bearing Accuracy: < 0.5 degrees rms
Operating Temperature: -30°C to +70°C
Operating Temperature Stored: -40°C to +85°C
E N V I R O N M E N TA L
Dimensions: 60 cm (l) x 16 cm (w) x 18 cm (h) (Not
including mounts)
Weight: 1.5 kg \ 3.31 lbs
Humidity: 100% condensing
P O W E R
Power Supply: 8.0 to 40 VDC vDC
Power Consumption: < 4.5 W, < 360 mA @ 12.0 VDC
Reverse Polarity Protection: Yes (but not reverse polarity operation)
Power Data Connector: 18-pin, Environmentally sealed
C O M M U N I C AT I O N S
Serial Ports 3 full duplex RS-232 and 2 half-duplex
RS-422
Isolation: All serial ports optically isolated from
power
Baud Rates: 4800, 9600, 19200
Data I/O Protocol: NMEA 0183 V3.0
Correction I/O Protocol: RTCM SC-104
NMEA Heading Messages: GPHDT, GPROT, PSAT, HPR, GGA, VTG,
ZDA,GSA, GSV, GST, GBS, GRS
M X 5 7 5 A S P E C I F I C AT I O N S
M X 5 7 5 A C O M P AT I B L E A C C E S S O R I E S
Part Number Picture Description
575-500-03 MX575A DGPS Compass with MX500, and JB (add cable)
Parts included:MX575A DGPS compass sensor, MX575A Power/Data 15m Cable, MX575A Manual, MX575A Pole Mount,MX575A Fixed Mount, MX575A Mounting Kit, MX500 2 port CDU, MX500 Mount Bracket Kit, Power/NMEA 3m Cable
MX-500 MX-500 CDU
Parts included: 2 port MX500 CDU, Mount Bracket Kit, Power/NMEA 12-pins 3m Cable, Operator/Installation Manual, Quick Reference Guide
510-000-0000 MX510 CDU
Parts included: 2 port MX510 CDU, Mount Bracket kit, Power/NMEA 12-pins 3m Cable, Operator/Installation manual, Quick Reference Guide
512-000-0000 MX512 CDU (also order JB P/N 512-100-1001)
Parts included: 9 port MX512 CDU, Mount Bracket kit, Power/Date 3m Cable, Operator/Installation manual, Quick Reference Guide
27107523 HR80 Heading repeater
23
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
Navico Operational Headquarters | Donker Duyvisweg 56 3316 BM Dordrecht, The Netherlands www.simrad-yachting.com/professional
EUROPE/MIDDLE EAST/AFRICA
ALGERIA Algerian Technical Services & Systems Lotissement El Bina 142 Dely Ibrahim - Alger 16302 Tel.: 213 21 37 05 56 Fax.: +213 21 37 05 86
ANGOLA JEMBAS-Assistència Tecnica Liimitada, Largo Do Soweto 88 Luanda Tel.: +244 222 637 000 Fax: +244 222 637 038
BENELUX Simnav BV Van Hennaertweg 17a 2952 CA Alblasserdam Tel.: +31 78 6921900
BULGARIA BS Marine EOOD Bulstar Str #1 8140 Atia Bulgaria Tel.: +359 550 422 42
CROATIA Almar d.o.o. Porec - Kamenarija 12 52452 Funtana Tel.: +385 52 445 005 Fax: 385 52 445 276
DENMARK See Germany
ESTONIA Admiral Trade OÜ Regati 1 11911 Tallinn Tel.: +372 639 89 46 Fax: 372 639 89 30
FINLAND At Marine OY Mesikukantie 16 O1300 Vantaa Tel.: +35 89 5494 2600 Fax: +35 89 5494 2700
FRANCE Navico France S.A. Parc d’Activités Ragon, 23 Avenue Pasteur 44 119 Treillieres Tel.: +33 2 28 01 23 01 Fax: +33 2 28 01 21 43
GERMANY & AUSTRIA Navico GmbH Carl-Friedrich-Gauss Strasse 2 24837 Schleswig Germany Tel.: +49 4621 96130 Fax: +49 4621 961329
GREECE & CYPRUS Aegean Electronics S.A. 4, Zosimadon Street. 185 31 Piraeus Greece Tel.: +30 210 413 7269 Fax: +302 10 413 7270
ICELAND Fridrik A. Jonsson EHF Akralind 2 210 Kopavogur Tel.: +354 552 2111 Fax: +354 552 2115
ISRAEL P. Fischeles Building 62. Ma’agan Hadayig Kyshin 26298 Haifa bay. Haifa. Tel.: +97 25444 19379 ITALY Navico Italia Srl. Via Benadir 14 20132 Milan Tel.: +39 02 26149517 Fax: +39 02 8970035
LEBANON & SYRIA Selcom Marine Sarl. P.O. Box 55541 Dekwaneh Main Street Beirut Lebanon Tel.: +961 149 1489 Fax: +961 149 5325
MALTA Medcomms Ltd 4 Msida Rd. Gzira GZR03 Tel.:+356 21 335521 Fax: +356 21 310820
MOROCCO Soremar 17 Rue Le Catelet, Edif. Emilie Zola 21900 Casablanca Tel.: +212 22 24 82 45/49 Fax: +212 22 24 83 36/52
NORWAY ProNav AS Hovlandsveien 52 N-4370 Egersund Tel.: +47 51 46 43 00
POLAND Escort Ltd. Electronics Syst. Grudziadzka 3 70–130 Szczecin Tel.: +48 91 43 10 400 Fax: +48 91 48 24 777
PORTUGAL Nautel - Sistemas Electronics Lda. Rua Fernando Mendes Pinto 46 1400-146 Lisboa Tel.: +351 21 300 70 30 Fax: +351 21 300 70 39
ROMANIA Navtron Srl Str. Vasile Marcovici nr. 7 9100130 Constanta Tel.: +40 241 545 650 Fax: +40 241 555 582
RUSSIA Simbia Engineering Company Ltd 4A Verhneozernaya Str. 236018 Kaliningrad Tel.: +7 0112 215492 Fax: +7 0112 365380
SOUTH AFRICA Marine Radio Acoustic Devices P.O. Box 12076 N1 City 7463 Cape Town Tel.: +27 21 559 4003 Fax: +27 21 559 2752
SPAIN Navico Marine Electronics S.L. Pol. Ind. Finestrat nave 14 Avda. Pais Valenzia 28 03509 Finestrat (Alicante) Tel.: +34 902 350 750 Fax: +34 902 350 950
SWEDEN Sportmanship Marin AB Bolshedens Industriväg 30 427 50 Billdal Tel.: +46 31 726 14 00
SWITZERLAND Marine Parts Technics AG In der Au 5 CH-8406 Winterthur Tel: +41 52 203 66 55 Fax: +41 52 203 66 56
TUNISIA Méditerranée Services Résidence Du Lac Bloc D, no 11 1053 Les Berges Du Lac Tel.: +216 71 86 02 01 Fax: 216 71 86 10 23
TURKEY Promar Marine Equip. Ltd. Igrip Sokak Gul. Apt. No: 7/2 81030 Fenerbache (Istanbul) Tel.: +90 216 3460 894 Fax: +90 216 3461 493
UNITED ARAB EMIRATES Emphor FZCO P.O. Box 61232 Jebel Ali Free Zone Dubai UAE Tel.: +97 148 830 233 Fax: +97 148 830 133
UNITED KINGDOM & IRELAND Navico Ltd (UK) Premier Way, Abbey Park Romsey, Hampshire UK, S051 9DH Tel.: +44 1794 51 0010 Fax: +44 1794 51 0006
ASIA PACIFIC
AUSTRALIA Navico Australia Pty. Ltd. Unit 5, 12 Mars Rd, Lane Cove NS W 2066 Tel: +02 9936 1000 Fax: +02 9936 1001
CHINA & HONG KONG CITE Limited Rm C-E, 16/F, Yan’s Tower 26-27 Wong Chuk Hang Road Aberdeen Hong Kong Tel.: +852 2552 0178 Fax: +852 2873 0679
Peaceful Marine Electronics Co., Ltd. FRoom 1002 Unit 2 No.32 XiAn Road Shahekou District Dalian China 116021 Tel: +86 411 84643892
INDIA Elektronik Lab R/13 Navroz Baug, Lalbaug, Mumbai 400012 Tel: +91 2224 71 5115
Elcome Marine Services Private Limited Great Eastern Summit “A” 11th Floor, Plot No. 56, Sector -15 C.B.D. Belapur, New Mumbai 400 614 Tel: +91 22 676 18000
JAPAN KGK JAPAN Relax Building 7F, 2-5-15, Ogi-Cho, Naka-Ku, Yokohama, 231-0027, Japan Tel: +81 45 664 7318 Fax: +8145 664 7319
MALDIVES Maizan Electronics Pte. Ltd Henveyru, 08 Sosunmagu Male’ 20012, Tel: +960 332 3211
NEW CALEDONIA Altomarine S.A.R.L. ZT Nouville Plaisance 9 Rue Capitaine BOIS 98846 Noumea BP 14348 Tel: +687 259612 Fax: +687 254330
NEW ZEALAND Advance Trident Ltd 383 New North Road Kingsland, P.O. Box 4174 Auckland Tel.: +64 9 845 5347 Fax: + 64 9 845 5348
PHILIPPINES Norwegian Marine Consultancy Inc. Bldg. 1, Cebu yacht Club Pusok, Lapu Lapu City 6015 Tel.: +63 32 34 00 292 Fax: +63 32 34 07 303
SINGAPORE, MALAYSIA & VIETNAM Jason Electronics Pte Ltd Blk 194 Pandan Loop #06-05 Pantech Industrial Complex Singapore 128383 Tel.: +65 6 872 0211 Fax: +65 6 872 1800
SRI LANKA International Marine Services 420/23/B1, Welipara, Thalawathugoda Sri Lanka Tel.: +94 717 262 233
SOUTH KOREA Turn-On Electronics Co. 7th fl. Dong-A Ilbo Bldg. 53-11, 4-KA Choongang-Dong Choong-Ku, Busan Tel.: +82 51 462 3930 Fax: +82 51 462 3089
TAHITI - FRENCH POLYNESIA Tahiti Sport S.A. P.O. Box 62 98713 Papeete French Polynesia Tel.: +689 50 59 59 Fax: +689 42 17 75
TAIWAN Dragon & Elephant Enterprise Co. Ltd 12F-4, No. 251 Min Chuan 1st Road Kaohsiung Taiwan R.O.C. Tel.: +886 722 72887 Fax: +886 722 72910
THAILAND Electrical Marine Co.Ltd Phuket Boat Lagoon 20/9-10 Moo Thepkasattri Road, Koh Kawe, Muang Phuket 83200 Tel.: +66 76 239 112 Fax: +66 76 239 058
VIETNAM AMI International Pte Ltd. Tel.: +65 67 75 00 81 Fax: +65 67 79 78 56
AMERICAS
ARGENTINA R.C. International Av. Corrientes 3150 13F 1193 Buenos Aires Tel.: +54 11 4866 0430 Fax: +51 11 4862 0430
BRAZIL Electra Service P.O. Box 111 11410-971 Guarujà Sao Paulo Tel.: +55 3354 3599 Fax: +55 3354 3471
CHILE Robinson Marine Electronics S.A. Avda. Vitacura 3568 OF 502 Casilla 19012 Cooreo 19 Vitacura Santiago Tel.: +56 2 207 3059 Fax: +56 2 207 2695
URUGUAY Electromaritima Uruguaya Ltda Guatemala 1260 11800 Montevideo Tel.: +59 82 9247 789 Fax: +59 82 9247 138
USA, CANADA & MEXICO Navico 410 Amherst Street Suite 110 03063 Nashua, NH USA Tel.: 1-800-628-4487 Tel.: +1 603-324-2042
Navico Torrance 23868 Hawthorne Blvd., Suite 201 Torrance, CA 90505 Tel.: +1 310 791 8213 Fax: +1 310 791 6108
Sales and Service Worldwide