Silicone Insulation and SealingTapes for Extreme Environments

MIDSUN SPECIALTY PRODUCTS

Manufactured by

RoHS Compliant REACH SVHC Compliant Customization Available

Servicing Industry for over 25 years

TM

www.efusing.com

Part Number Description Width

inch / mmLengthft / m

Thicknessinch / mm Color / Type / Profile / Guideline Flame

Resist*Case Qty

E112-010 112 Silicone Electrical Tape 1.00 / 25.4 30 / 9.1 0.012 / 0.304 Gray / I / Rectangular / Red Yes 12E140-010 140 Silicone Sealing Tape 1.00 / 25.4 36 / 11 0.040 / 1.000 Gray / II / Triangular / Red Yes 12E220-010 220 Wide Silicone Electrical Tape 2.00 / 50.8 36 / 11 0.020 / 0.508 Gray / I / Rectangular / Red Yes 6E330-010 330 Wide Silicone Sealing Tape 3.00 / 76.2 36 / 11 0.030 / 0.760 Gray / II / Triangular / Red Yes 6E900-010 900 Moldable Silicone Putty 1.00 / 25.4 1.5 / .45 0.125 / 3.175 Gray / NA / Flat / None Yes 12E903-010 903 Insulating Silicone Grip 1.25 / 31.8 5 / 1.5 0.067 / 1.700 Gray / NA / Ridge Grip / None Yes 12

freight Prepaid in USA with 1 case minimum orderSurcharge may apply for HI, AK, and international

terms Initial PO Prepay by CC. Reorders - Net 30lead time 1-3 weeks from order confirmation

returns RMA required for defective merchandisedistributor Contact your salesperson for pricing

378 Four Rod Rd. Berlin, CT 06037 USAemail sales@midsunsp.comtel 888-866-8273 | web midsunsp.comoffice 860-378-0111 | fax 860-378-0113

E/Fusing silicone tapes and accessories are formulated from high performance silicone rubber for use in extreme environments. They self-bond and seal to form a Class H insulating protective layer with excellent resilience to elements and harsh conditions.

Stretches 300% and forms around irregular shapes

Bonds using cross-link technology to fuse into a solid layer

Contains no glues or adhesives, leaves no residue, easily removable

Withstands temperatures from -65°F to 500°F (-54°C to 260°C)

Insulates at least 400V / mil. Meets and exceeds UL510

Naturally resists, UV, oil, salt, chemicals, ozone, moisture and corona

Hardness 50 Shore Durometer

Bond Strength ASTM D-2148 2 psi

Water Absorption 6251 3 % By Weight

Tensile Strength ASTM D-412 750 psi

Volume Resistivity ASTM D-257 3 x 1014 OHM/CM

Maintenance

• Vibration dampening, scratch resistance and increase traction

• Wire harness, cable bundling, identification and organization

• Terminate wires, splice wrap, thermal and electrical insulation

Repair

• Mitigate leak damage during emergencies / Create custom O-rings

• Repair/restore deteriorated handles, levers and grips

Operation

• Stop-off masking, protect surfaces from UV and contamination

• Create barrier to protect critical equipment from wildlife tampering

Coil and Motor Leads Pipes and Fittings Underground Cable

Slurry and Waste Pipe Electrical Bus Bar Flexible Hose & Conduit

Coaxial Cable Jumper Tools & Handles High Voltage Insulators

Manufacturing & Process Equipment

Heat Transfer Tubing & Plating

Aviation Instruments & Assemblies

* Flame Retardant Meets UL 94 V-0 specifications for self-extinguishing. Will not propagate flames.

Trusted by electric utility, aviation, military and maintenance for over 25 years

AREF-1001 Rev032518

Features

Typical Properties

Part List

Applications

Use on

900330220140112 903