signal quality analyzer - atecorp.com...the ppg module supports low-jitter and high-quality...

52
Product Brochure MP1800A Series Signal Quality Analyzer

Upload: others

Post on 12-Mar-2021

6 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure

MP1800A SeriesSignal Quality Analyzer

Page 2: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

2 Product Brochure l MP1800A

Compact and High-performance BERT32.1 Gbit/s Signal Quality Analyzer

High-quality, Low-jitter Waveforms

High Input Sensitivity & Wide Phase Margin

Burst Measurement

Multi-channel Configuration (Up to 8ch)

Wide Bandwidth 0.1 Gbit/s to 32.1 Gbit/s

32.1 Gbit/s Jitter Tolerance Test(SJ, RJ, BUJ, SSC)

Signal Quality Analysis

Clock Recovery

Wide Bandwidth 0.1 Gbit/s to 32.1 Gbit/sSupports 0.1 Gbit/s to 32.1 Gbit/s bit rate thru module selection 32 Gbit/s PPG/ED Module• 2.4Gbit/sto32.1Gbit/s: MU183020A/21A,MU183040B/41B(Option-001)

• 2.4Gbit/sto28.1Gbit/s: MU183020A/21A,MU183040B/41B

28 Gbit/s MUX/DEMUX Module• 8Gbit/sto28.1Gbit/s: MU182020A/21A,MU182040A/41A(Option-001/003)

• 8Gbit/sto28Gbit/s: MU182020A/21A,MU182040A/41A(Option-001)

• 8Gbit/sto25Gbit/s: MU182020A/21A,MU182040A/41A

14Gbit/sPPG/EDModule• 0.1Gbit/sto14.1Gbit/s: MU181020B,MU181040B(Option-002/005)

• 0.1Gbit/sto14Gbit/s: MU181020B,MU181040B(Option-002)

12.5Gbit/sPPG/EDModule•0.1Gbit/sto12.5Gbit/s: MU181020A,MU181040A(Option-002)•9.8Gbit/sto12.5Gbit/s: MU181020A,MU181040A(Option-001)

MP1800ASQAisamodularBERTwithplug-inmodules;• PulsePatternGenerator(PPG)supportinghighqualityoutputandhighamplitudesignals• ErrorDetector(ED)withhighinputsensitivitysupportingsignalanalysis,suchasBathtubandEyeDiagrammeasurements• JitterModulationSource(JMS)forgeneratingvarioustypesofjitter,suchasSJ/RJ/BUJ/SSC,andsupportingJitterTolerance

testsMP1800Asupportsphysicallayerstestingforopticalmodulesandhighspeeddevicesupto32.1Gbit/s.CombinedusewiththeMP1821A50G/56Gbit/sMUXandMP1822A50G/56Gbit/sDEMUXsupportsBERtestsupto56Gbit/s.Moreover,powerfulsignalintegritytestsatupto32.1Gbit/saresupportedbylinkedoperationwiththeMP1825B4TapEmphasis,MZ1834A4PAMConverterandMZ1838A8PAMConverter.

Page 3: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 3

Synchronization up to 8chDuetothemodularplatformdesign,thePPG/EDmodulescanbeconfiguredwithvariousothermodulestoconfigurecustomsystems.Thenumberofchannelsper28G/32GPPG/EDmodulecanbeselectedfrom1,2,or4andPPG/EDmodulescanbeinstalledtosupportupto8ch.Moreover,sinceeachchannelpatterncanbesynchronized,D/Aconverters,MUX/DEMUX,crosstalk,andskewtolerancecanbeevaluated.

Differential8ch

∗: Fordetailsaboutpossiblemodulecombinations,seetheOptionSelectionGuidefortheMP1800Aseries.

High Sensitivity Error Detector (ED)MU183040B/MU183041B28G/32Gbit/sHighSensitivityEDextendstheperformanceoftheearlierA-typeEDtoofferworld’sbestRxsensitivity∗withtheworld’sfastestAutoAdjust∗(auto-alignofthresholdlevelandphasepoints).TheMU183040B/41Bsupportssimultaneousmultichannelmeasurementsoflow-amplitude,lowEyeOpeningDUTssuchasHighsSpeedBackPlanedevicesandActiveOpticalCable(AOC)toachievemore-accurate,idealsignalqualityanalysis.EyeAmplitudeSensitivity:15mVp-p(typ.)(28.1Gbit/s,Single-end)≤25mVp-p(28.1Gbit/s,Single-end)EyeHeightSensitivity:10mVp-p(typ.)(28.1Gbit/s,Single-end)

∗AsofSeptember,2013

Passive EqualizerIn high speed serial transmission such as 28 Gbit/s, transmission lossesofprinted-circuitsboardscausestheEyeOpeningtobecomenarrower.TheJ1621AandJ1622APassiveLinearEqualizerscanbeconnectedtotheEDtocompensateforPCBtracelossesandimprovetheEyeOpening.CombinationwiththeMU183040B/MU183041BHighSensitivityEDsupportsJitterTolerancetestsofPHYdeviceswithanarrowEyeOpening.

Low-jitter, High-quality WaveformThePPGmodulesupportslow-jitterandhigh-qualitywaveforms.Theoutputamplitudecanbecustomizedtoapplicationneeds.Low-jitter:RJ300fsrms(typ.)

TotalRMSJitter700fsrms(typ.)Highamplitude: 0.5Vp-pto3.5Vp-p

[MU183020A-013/023,MU183021A-013]

Output Waveform at 28 Gbit/s, 3.5 Vp-p (MU183020A-013)using Sampling oscilloscope with 70 GHz bandwidth

28 Gbit/s, PPG Intrinsic TJ (1E-12) = 4.5 psp-p, RJ rms = 200 fsNominal measured data.Using Sampling Oscilloscope with 50 GHz bandwidth and<100 fs rms intrinsic jitter.

Clock RecoveryInternalClockRecoveryoptioncanbeinstalledintoMU183040B/41B.Physicallayer(PHY)devices,suchasSERDES,sometimeshavedifferentTxandRxClocksystemsandClockRecoveryisrequiredattheErrorDetectorforjittertolerancetests.Additionally,sincetransmissionusingMulti-ModeFiber(MMF)causesgenerationofjitterandwandercomponentsintheRxmodule,ClockRecoveryattheErrorDetectorissimilarlyrequired.InstallingthisClockRecoveryoptionsupportsstressjittertolerancetestsofPHYdeviceswithdifferentTxandRxclocks,BERmeasurementsofAOCdevices,andsimultaneousmultichannelmeasurements,offeringevenmoreaccurateandidealsignalintegrity analyses.

MP1800A

Internal Clock RecoveryPCB TraceDUT

10 mV

Equalizer

Page 4: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

4 Product Brochure l MP1800A

MU181500B Jitter Modulation Source Setting Screen

Sinusoidal Jitter (SJ) Random Jitter (RJ) Bounded Uncorrelated Jitter (BUJ)

Half Period Jitter (F/2 Jitter)

MX181500A Jitter/Noise Tolerance Test Software Setting Screen

SJ, RJ, BUJ, SSC and Half Period Jitter (F/2 Jitter) GenerationTheMU181500BJitterModulatorgenerateswide-amplitudeSJupto1UIataJitterFrequencyof250MHzandamaximum2000UI,ensuringsufficientmarginforreceiverJitterTolerancetests.Additionally,theIntrinsicJitterof275fsrms(nominal)∗isextremelylow,notonlywhenJittermodulationisOFFbutalsowhen0UIissetatJittermodulationON,ensuringaccuratemeasurementsevenatlowJitteramplitudes.Thecombinationoflowintrinsicjitterwaveformwithexcellentjittertransparencysupportshigh-accuracyJitterTolerancetests.Moreover,simultaneousinjectionofRJ,BUJandSSCaswellasdualSJfortwo-tonesupportsvariousJitterTolerancetests.Additionally,theMX181500AJitter/NoiseToleranceTestSoftwaresupportsmulti-masktablesaswellaseasymaskeditingtosupportnext-generationstandards.∗:PhasenoisemeasurementwithusingSpectrumAnalyzerand1010…repetitionsignal.

28 Gbit/s, PPG Intrinsic RJ rms Using Sampling oscilloscope with 50 GHz bandwidth and <100 fs rms intrinsic jitter

MP1800A

PPG Clock

AsynchronousClock

Internal Clock Recovery Equalizer

DUT Rx

DUT Tx

PCB Trace

PCB Trace

MP1825B4Tap Emphasis

Page 5: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 5

4PAM/8PAM Signal GenerationCombiningtheAnritsuMZ1834A/MZ1838A4/8PAMConverterwiththeMP1800ASignalQualityAnalyzersupportsgenerationofboth4PAMand8PAMsignalsforR&DHighSpeedBackPlaneand400GbER&D.TheMP1800Ahigh-qualityNRZwaveformandwidebandpassivePAMconvertergeneratehigh-qualityPAMsignalswithassuredS/N.

True BER Measurement of 32Gbaud 4PAM Signal BERmeasurementof4PAMsignalsrequiresaccuratemeasurementofbiterrorratesineachofthreeEyepatternsusinga3-chErrorDetector(ED).However,eachEyedatapatternmustbeaprogrammablepatternduetodifferencesinregularPRBS.Moreover,since2-bitdataissplitbetweenthreeEyepatterns,errorsmaybecountedtwicebymistakeatsimpleerrormeasurementsforeachEye,sothetrueBERcannotbemeasured.TheBERofthethreeEyepatternsofa4PAMdatasignalcanbemeasuredsimultaneouslybycombiningtheK240CPowerDividerandK241CPowerSplitterwiththeMU18304xBHigh-SensitivityED.Additionally,theTrueBERof4PAMsignalscanbemeasuredusingboththeMP1800Along-memoryprogrammablepatternfunctionandtheerrormaskfunctionforremovingunwantederrors.Moreover,versatileautomaticmeasurementfunctions∗enableeasyandefficienttesting.•AutoSearchfunctionautomaticallydetectseachdecisionpoint(boththeamplitudeandphase)ofUpper,MiddleandLowerEye.•SimultaneousBathtubJittermeasurementforPAM3Eyes•EyeMargin,EyeDiagramandQ-valuemeasurement∗:MP1800ASoftwareVersion7.9orlater. EyeHeight>50mVattheinputofEDisrequiredfor4PAMautomaticmeasurementfunction.

MP1800A2ch PPG3ch ED

NRZ Data CH1

NRZ Data CH2

MZ1834A 4PAM Converter

Differential 4PAM Signal

ED CH1

ED CH2

ED CH3

Upper EyeMiddle EyeLower Eye

DUTK240C + Power Divider

K241CPower Splitter

Page 6: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

6 Product Brochure l MP1800A

Versatile Pattern Generation• Pseudorandompatterns(PRBS) BecauseallPRBSratesrequiredbythestandardsaresupporteduptoPRBS231 –1,allBERaresupported. 2n –1(n=7,9,10,11,15,20,23,31)

• ZeroSubstitutionPattern All0sandAll1spatternscanbeaddedtoPRBSpatternsforperformingCDRtolerancetests. 2n, 2n –1(n=7,9,10,11,15,20,23)

• DataPattern Patternsrequiredbyeachapplicationcanbecreatedwithflexibility. 128Mbitsmax.(Steps:1-bit)

• AlternatePattern Twopatterns(AandB)canbesetandtheA/Bpatterncanbeoutput at any timing.

• MixedPattern AmixeddataandPRBSpatterncanbeoutput.AtcreationofSONET/SDHframes,addingaPRBS231 – 1, etc., pattern to the payloadallowssettingofacontinuouspatternacrossframes.

• SequencePattern Avarietyofprogrammablepatternscanbeoutputinanysequenceandcombiningvariouspatternsofferseffectivesupportforapplicationsrequiringsequenceprocessing.

Data Pattern Setting Screen

High Input Sensitivity & Wide Phase MarginUsingthehigh-inputsensitivityEDRxfunctionsupportsdirectinputandevaluationoflow-amplitudedata.•InputSensitivity MU181040A-001:<50mVp-p MU181040A/B-002:10mVp-p(typ.)•PhaseMargin MU181040A/B-002:60ps(typ.)(12.5Gbit/s)

Burst MeasurementThefollowingapplicationevaluationsusingburstsignalsaresupported.•E-PON,G-PON,10GE-PONUpstreamTest•OpticalLoopTest•TransmissionTestusingQuantumNoiseTechnology

∗: Functionsandspecificationsaredifferentaccordingtothemodule. RefertotheSpecificationandBrochureforeachmodule.

Low-jitter High-quality WaveformsThecombinationoflow-jitter,high-qualityoutputwaveform,andhigh-amplitudeoutputPPGmodulescanbetailoredtotheapplication.•LowJitter:8psp-p(MU181020A/B-012)•HighAmplitude:0.5Vp-pto3.5Vp-p(MU181020A/B-013,MU182020A/21A-013)

MU181020A-010 MU181020A-011 MU181020A-012 MU181020A-01310Gbit/s,PRBS31,Maximumamplitude

Page 7: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 7

Eye MarginForconfirmingDATAthresholdandphasemargins.

Eye DiagramUsedtoobtainbiterrorratecontourslinkingspecifiedbiterrorratepoints.

Q MeasurementCalculatesQvaluefrombiterrorrateusingchangeinthresholdvalue.CanbeusedtocheckchangeinQvalueforclockphase.

BathtubPerformsoptimumbiterrorratebasedonchangesinbiterrorraterelativetophase.Andperformsjitteranalysis(TJ,DJ,RJ).

Bit Error Analysis using ISIUsedtoconfirmbiterrorrateineachspecifiedblockorbitpositionandforbiterrorratecorrelationwithinter-symbolinterference.

∗: Functionsandspecificationsaredifferentaccordingtothemodule. RefertotheSpecificationandBrochureforeachmodule.

Page 8: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

8 Product Brochure l MP1800A

Application 1: EA/EML Module Evaluation

Application 2: 10 Gbit/s PON OLT Module Inspection

•DirectdrivingofEMLandEAmoduleusing3.5Vp-phigh-amplitudewaveform•Widecrosspointadjustmentfunction:20to90%[MU181020A/B-013]

•EachPPGslotcanoutputpre-biasandresetsignalsforthePONBERtest.(Level:H:0V,L:–1V)•ThePONOLTUpstreamtestcanbeperformedatupto12.5Gbit/susingoneMP1800A.

Application 3: 32 Gbit/s Band Ultrafast Interconnect Evaluation

• 32.1Gbit/sMulti-channelsignalgeneration• JitterTolerancetest• Emphasisefficiencycheck• Crosstalktest

Applications

Page 9: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 9

Application 4: AOC (Active Optical Cable) Evaluation

• Simultaneous8ch(2×4chend-to-end)BERmeasurement• Crosstalktest• JitterTolerancetest• BathtubJitter,EyeDiagramanalysis

Application 5: 100 GbE/400 GbE Devices CFP2/CFP4/CDFP Evaluation

• Simultaneous4chBERmeasurement• Opticaloutputwaveformoptimizationusingcross-pointadjustment• Inter-lanetimingandskewcontrol• JitterTolerancetest• High-qualityandhigh-amplitudewaveformidealforEMLmoduleevaluation(3.5Vp-poption)

Dual-tone-SJ/RJ/BUJ/SSCareavailablewithusingMU181500BJitterModulationUnit.

Page 10: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

10 Product Brochure l MP1800A

Application 6: 100 Gbit/s Band DP-QPSK and 40 Gbit/s Band DQPSK Evaluation

• Pre-codingsignalgeneratorsynchronizedbetweenchannels• Opticaloutputwaveformoptimizationusingcross-pointadjustment• Timingcontrolandskewcontrolbetweenchannels• Modulatorinputleveltolerance

Page 11: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 11

Panel Layout

MP1800A Signal Quality Analyzer (6-Slot)

1 GroundThisterminalisusedtodischargestaticelectricity.

2 Power3 Panel Lock/Remote

Thiskeylocksthepaneloperationkeys.4 Screen Copy

Thiskeycopiesthecurrentlydisplayedscreen.5 System Alarm

ThekeyLEDlightsatasystemerrorandadialogexplaining the error contents is displayed.

6 Display8.4-inchColorTFT800×600pixels

7 Slot KeysThesekeyscorrespondtotheoperationscreenforeachinstalled module.

8 Customize KeyThiskeyisusedtocalluptoeighteencommonlyusedscreens.

9 Rotary EncoderWhenthe[Edit]keylampislit,turningthisrotaryencoderincreasesordecreasesnumericvalues.Whenthe[Cursor]keylampislit,theoperationitemcanbeset.Presstherotaryencodertoswitchbetweenthe[Edit]and[Cursor]functions.

10 Cursor KeyThesekeysmovethescreencursorup,down,leftandright on screen.

11 Ten KeyThesetenkeysareforinputtingnumericvalues,units,etc.

12 USBTwoRev.1.1USBports

13 VolumeThisknobincreasesanddecreasesthevolumeofthemeasurement error alarm.

14 GPIBThisconnectorisusedwhentheMP1800A-001GPIBoption is installed.

15 EthernetThisunithastwoRJ45Ethernetjackssupportingconnectionto10BASE-Tor100BASE-TXcables.

16 USBRev.1.1USBport

17 AC InletThissocketisforconnectingthe3-wirepowercord.

18 GPIOReservedforfutureuse.

19 VIDEOThisconnectorisforanexternaldisplay.

20 Slots for ModulesTheseslotsareforinstallinguptosixmodules.

8 9

10

11

76

1

2

3

4

5

1213

15

16

171819

14

20

Front Rear

Side (Right)

Page 12: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

12 Product Brochure l MP1800A

MT1810A 4Slot Chassis

1 GroundThisterminalisusedtodischargestaticelectricity.

2 Power3 Slots for Modules

Theseslotsareforinstallinguptofourmodules.4 Main frame ID

UsedtoidentifytheMT1810AunitswhenonehostPCcontrolsmultiple(upto4)MT1810Aunits.

5 VolumeThisknobincreasesanddecreasesthevolumeofmeasurement error alarm.

6 EthernetThisunithastwoRJ45Ethernetjackssupportingconnectionto10BASE-Tor100BASE-TXcables.

7 AC InletThissocketisforconnectingthe3-wirepowercord.

8 GPIOReservedforfutureuse.

8 7

6

4

5

3

1

2

Front

Rear

Page 13: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 13

MP1800 Series Modules

MU181000A 12.5 GHz Synthesizer

MU181000B 12.5 GHz 4 Port Synthesizer

MU181500B Jitter Modulation Source

MU181800A 12.5 GHz Clock Distributor

1 2 3 4 5 6 7

1 10MHzBuffOutput Outputfor10MHzreferenceclock5 TriggerOutput∗1 Outputfor1/64clockor1/1clock

2 10MHzRefInput Inputfor10MHzreferenceclock3 100MHzRefInput∗1 Inputfor100MHzreferenceclock 6 JitterExtInput∗1 Inputforjittermodulationsignal4 Ext I, Q∗1 InputforI,Qsignal 7 ClockOutput Clockoutput

1 2 3 4 5 6 7

1 10MHzBuffOutput Outputfor10MHzreferenceclock5 TriggerOutput∗2 Outputfor1/64clockor1/1clock

2 10MHzRefInput Inputfor10MHzreferenceclock3 100MHzRefInput∗2 Inputfor100MHzreferenceclock 6 JitterExtInput∗2 Inputforjittermodulationsignal4 Ext I, Q∗2 InputforI,Qsignal 7 ClockOutput1to4 Clockoutput1to4

1 IQOutput OutputsIQsignals5 ReferenceClockOutput

Outputstwo1/1,1/2,or1/4frequency-dividedclocksbasedoneitheroffollowinginputs:•ExtClockInput • Aux Input2 ExtJitterInput Inputformodulationsignalsource

3 Sub-rateClockOutputOutputsfrequency-dividedclock(1/8to1/256)basedoneitheroffollowinginputs:•ExtClockInput • Aux Input

6 JitteredClockOutput Outputstwojitter-modulatedclocksignals

4 Aux Input Input clock signals 7 ExtClockInput Inputforexternalclock

1 ClockOutput1to4 OutputfordividedclockofClockInput 2 ClockInput Clockinput

1 2

MU181800B 14 GHz Clock Distributor

1 ClockOutput1to5 OutputsfordividedclockofClockInput 2 ClockInput Clockinput

1 21

1 32 5 6 74

Page 14: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

14 Product Brochure l MP1800A

MU181020A 12.5 Gbit/s PPG/MU181020B 14 Gbit/s PPG

MU181040A 12.5 Gbit/s ED/MU181040B 14 Gbit/s ED

MU182020A 25 Gbit/s 1ch MUX

MU182040A 25 Gbit/s 1ch DEMUX

1 Data/DataOutput Outputfordifferentialdatasignal 4 AuxOutput Outputforauxiliarysignal2 Clock/ClockOutput∗3 Outputfordifferentialclocksignal 5 Aux Input Inputforauxiliarysignal3 GatingOutput Outputforbursttimingsignal 6 Ext.ClockInput Clockinput

1 2 3 4 5 62

1 Data/Data Input Inputfordifferentialdatasignal 4 RecoveredClockOutput∗5 Outputforregeneratedclockfrominputdata2 Data/Data Monitor∗4 Outputfordividedclockofinputdata 5 AuxOutput Outputforauxiliarysignal3 ClockInput∗4 Clockinput 6 Aux Input Inputforauxiliarysignal

1 1/2DataInputA/B InputfortwodatasignalsfromMU181020A/B 4 ClockOutput Clockoutput2 1/2ClockInput InputforclocksignalfromMU181020A/B 5 1/2ClockOutput OutputfortwoclocksignalstoMU181020A/B3 Data/DataOutput Outputfor2/1multiplexeddifferentialdatasignal 6 Ext.ClockInput System clock input

1 2 3 4 5 6

1 Data/Data Input Differentialdatainput 3 1/2ClockOutput Outputfor1/2clock2 1/2DataOutputA/B Outputfor1/2demultiplexedinputsignal 4 Ext.ClockInput Clockinput

2 1 3 4

MU182021A 25 Gbit/s 2ch MUX

1 1/2DataInput1A/1B InputfortwodatasignalsfromMU181020A/B 5 Data/DataOutput2 Outputfor2/1multiplexeddifferentialdatasignal2 1/2DataInput2A/2B InputfortwodatasignalsfromMU181020A/B 6 Clock/ClockOutput∗6 Clockoutput3 1/2ClockInput InputforclocksignalfromMU181020A/B 7 1/2ClockOutput OutputforfourclocksignalstoMU181020A/B4 Data/DataOutput1 Outputfor2/1multiplexeddifferentialdatasignal 8 Ext.ClockInput System clock input

1 2 3 4 5 6 7 8

4 5 61 2 3

Page 15: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 15

MU182041A 25 Gbit/s 2ch DEMUX

1 Data/Data Input 1 Differentialdatainput 4 1/2DataOutput2A/2B Outputfor2/1demultiplexedinputsignal2 Data/Data Input 2 Differentialdatainput 5 1/2ClockOutput Outputfor2/1clock3 1/2DataOutput1A/1B Outputfor2/1demultiplexedinputsignal 6 Ext.ClockInput Clockinput

3 4 5 61 2

MU183020A 28G/32G bit/s PPG (1ch or 2ch)

1 Data1/XData1Output∗7 OutputforCh1differentialdatasignal 5 Aux/XAuxOutput Outputfordifferentialauxiliarysignal2 Data2/XData2Output∗8 OutputforCh2differentialdatasignal 6 ClockOutput Outputforclocksignal3 GatingOutput Outputforbursttimingsignal 7 ExtClockInput Inputforexternalclocksignal4 Aux Input Inputforauxiliarysignal

1 2 3 4 5 6 7

MU183021A 28G/32G bit/s 4ch PPG

1 Data1/XData1Output OutputforCh1differentialdatasignal 6 Aux Input Inputforauxiliarysignal2 Data2/XData2Output OutputforCh2differentialdatasignal 7 Aux/XAuxOutput Outputfordifferentialauxiliarysignal3 Data3/XData3Output OutputforCh3differentialdatasignal 8 ClockOutput Outputforclocksignal4 Data4/XData4Output OutputforCh4differentialdatasignal 9 ExtClockInput Inputforexternalclocksignal5 GatingOutput Outputforbursttimingsignal

1 3 42 5 6 7 8 9

Page 16: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

16 Product Brochure l MP1800A

MU183040A 28G/32G bit/s ED (1ch or 2ch) MU183040B 28G/32G bit/s High Sensitivity ED (1ch or 2ch)

MU183041A 28G/32G bit/s 4ch ED MU183041B 28G/32G bit/s 4ch High Sensitivity ED

1 Data1/XData1 Input∗7 InputforCh1differentialdatasignal 4 Aux/XAuxOutput Outputfordifferentialauxiliarysignal2 Data2/XData2 Input∗8 InputforCh2differentialdatasignal 5 ExtClockInput Inputforexternalclocksignal3 Aux Input Inputforauxiliarysignal

1 Data1/XData1 Input InputforCh1differentialdatasignal 5 Aux Input Inputforauxiliarysignal2 Data2/XData2 Input InputforCh2differentialdatasignal 6 Aux/XAuxOutput Outputfordifferentialauxiliarysignal3 Data3/XData3 Input InputforCh3differentialdatasignal 7 ExtClockInput Inputforexternalclocksignal4 Data4/XData4Input InputforCh4differentialdatasignal

∗1: OnlyenabledwhenJitterModulationoption(MU181000A-001)installed∗2: OnlyenabledwhenJitterModulationoption(MU181000B-001)installed∗3: Single-endoutputswithoutDifferentialClockoutputoption(MU181020A/B-021,121)∗4: Onlyenabledwhen0.1Gbit/sto12.5Gbit/soption(MU181040A-002)or0.1Gbit/sto14Gbit/soption(MU181040B-002)installed∗5: OnlyenabledwhenMU181040A/B-020/120installed∗6: Single-endoutputwithoutDifferentialClockOutputoption(MU182020A-021)∗7: Data/XDatawhen1choptionwasselected.∗8: Notimplementedwhen1choptionwasselected.

1 2 3 4 5

1 3 42 5 6 7

Page 17: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 17

MP1800A Signal Quality AnalyzerLCDDisplay 8.4-inchColorTFT,800×600pixelsPeripheralInterface VGAout(SVGA),USB1.1(3Ports)RemoteInterface GPIB[MP1800A-001],LAN(2ports)[MP1800A-002]Options 2-slotPPGand/orED[MP1800A-014],4-slotPPGand/orED[MP1800A-015],6-slotPPGand/orED[MP1800A-016]PowerSupply 100V(ac)to120V(ac)/200V(ac)to240V(ac)[auto-switchingbetween100V(ac)/200V(ac)],47.5Hzto63HzPowerConsumption ≤600VAOperatingTemperature 5°to40°CDimensions and Mass 320(W)×177(H)×450mm(D),≤13kg(withoutmodules)EMC EN61326-1,EN61000-3-2LVD EN61010-1

MT1810A 4Slot ChassisRemoteInterface LAN(2ports)Options 2-slotPPGand/orED[MT1810A-014],4-slotPPGand/orED[MT1810A-015]PowerSupply 100V(ac)to120V(ac)/200V(ac)to240V(ac)[auto-switchingbetween100V(ac)/200V(ac)],47.5Hzto63HzPowerConsumption ≤450VAOperatingTemperature 5°to40°CDimensions and Mass 350(W)×132.5(H)×400mm(D),≤13kg(withoutmodules)EMC EN61326-1,EN61000-3-2LVD EN61010-1

MU181000A 12.5 GHz Synthesizer/MU181000B 12.5 GHz 4port Synthesizer

ClockOutput

NumberofOutput:1[MU181000A],4[MU181000B]FrequencyRange:0.1GHzto12.5GHz,Steps:1kHz/1MHzOffsetfromSetFrequency:–1000ppmto+1000ppm,Steps:1ppm,1Hz(Min)Level:0.632Vp-pto2Vp-p(AC)[MU181000A],0.4Vp-pto1Vp-p(AC)[MU181000B,MU181000A/B-001]SSBPhaseNoise:≤–80dBc/Hz(10kHzoffset)IntrinsicJitter:≤20psp-p[MU181000A/B]

≤20psp-p(fc>400MHz)[MU181000A/B-001]Waveform:Squarewave(<1GHz),SquarewaveorSinewave(≥1GHz)Duty:50±10%Inter-channelSkew:≤10ps(12.5GHz)[MU181000B]Connector:SMA(f.),Termination:50Ω/GND

10MHzInput

Frequency:10MHz±10ppmLevel:0.5Vp-pto2.0Vp-pWaveform:SquarewaveorSinewaveDuty:50±10%Connector:BNC,Termination:50Ω/GND

10MHzOutput

Level:1.0Vp-p±30%(AC)Waveform:SquarewaveDuty:50±10%Connector:BNC,Termination:50Ω/GND

Specifications

Page 18: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

18 Product Brochure l MP1800A

MU181000A/B-001 Jitter Modulation

External Modulation Input

FrequencyRange:9Hzto1GHzLevelRange:3Vp-p,0V(dc)(Max.)Waveform:SinewaveConnector:SMA(f.),Termination:50Ω/GND

External I, Q Input

FrequencyRange:DCto320MHz(–3dB)BandwidthLimit:5MHz(0.1GHz≤fc≤0.4GHz),10MHz(0.4GHz<fc≤0.65GHz),20MHz(0.65GHz<fc≤1.4GHz),

100MHz(1.4GHz<fc≤2.4GHz),320MHz(2.4GHz<fc≤4.0GHz)LevelRange:±0.5VConnector:BNC,Termination:50Ω/GND

100MHzReferenceSignalInput(SSC)

OutputCenterFrequencyis×25or×50ofReferenceInputFrequencyModulationFrequency:30kHzto33kHzFrequencyDeviation:50kHzLevel:1.0Vp-p±30%(AC)Waveform:SquarewaveorSinewaveDuty:50±10%Connector:BNC,Termination:50Ω/GND

TriggerOutput

Availablefrom800MHzto12.5GHzofCenterfrequency(fc)Frequency:1/64(800MHz<fc≤6.4GHz),1/1or1/64selectable(6.4GHz<fc≤12.5GHz)Level:0.4Vp-pto1.1Vp-p(AC)Connector:SMA(f.),Termination:50Ω/GND

InternalJitterFunction

ModulationFrequencyRangeCenterFrequency(fc) fm1 fm2 fm3

0.1GHzto0.8GHz 13.75Hz 250kHz 5MHz0.8GHzto1.6GHz 27.5Hz 500kHz 10MHz1.6GHzto3.2GHz 55Hz 1MHz 20MHz3.2GHzto6.4GHz 110Hz 2MHz 40MHz6.4GHzto12.5GHz 220Hz 4MHz 80MHz

ModulationFrequencyAccuracy:±100ppmJitterAmplitudeAccuracy∗1:±0.01UI±Q%(0.001UIp-pto2.19UIp-p,fc<1GHz)±0.02UI±Q%(0.001UIp-pto2.19UIp-p,fc≥1GHz)±0.2UI±Q%(2.2UIp-pto21.99UIp-p)±2UI±Q%(22UIp-pto4000UIp-p)

FM Q9Hz≤fm≤500kHz 7500kHz<fm≤2MHz 122MHz<fm≤80MHz 15

ExternalJitterFunction

ModulationFrequencyRange:9Hzto5MHz(0.1GHz≤fc≤0.4GHz) 9Hzto10MHz(0.4GHz<fc≤0.65GHz) 9Hzto20MHz(0.65GHz<fc≤1.4GHz) 9Hzto100MHz(1.4GHz<fc≤2.4GHz) 9Hzto500MHz(2.4GHz<fc≤4.0GHz) 9Hzto1GHz(4.0GHz<fc≤12.5GHz)

UIRange:0.22,2.0,20,200,4000UI

ModulationFrequencyRange∗1

CenterFrequency InputFrequency JitterAmplitude1.4GHzto2.4GHz 80MHzto100MHz

Max. 0.22 UI2.4GHzto4.0GHz 80MHzto500MHz4.0GHzto8.0GHz 80MHzto1GHz

8.0GHzto8.5GHz80MHzto500MHz500MHzto1GHz Max. 0.10 UI

8.5GHzto11.3GHz 80MHzto1GHz Max. 0.22 UI

11.3GHzto12.5GHz80MHzto250MHz Max. 0.22 UI250MHzto1GHz Max. 0.10 UI

ModulationSensitivity:0.22UIRange,Inputlevel:0.5Vp-pOutputClockFrequency FMFrequency InputFrequency JitterAmplitude

0.1GHz≤fc≤12.5GHz4MHz 9Hzto4MHz

0.1UIp-p±0.03UI80MHz 4MHzto80MHz500MHz 80MHzto500MHz

2.4GHz<fc≤12.5GHz 1GHz 500MHzto1GHz

JitterMask∗1

JitterMask∗1

Page 19: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 19

ExternalJitterFunction

ModulationSensitivity:2,20,200,4000UIRange,Inputlevel:0.5Vp-p

ClockFrequency:0.1GHz≤fc≤0.8GHzJitterAmplitude FMFrequency InputFrequency JitterAmplitude

2 UI 250kHz 27.5kHz 1UIp-p±0.3UI20 UI 27.5kHz 2.75kHz 10UIp-p±3UI200 UI 2.75kHz 275Hz 100UIp-p±30UI4000UI 275Hz 13.75Hz 1000UIp-p±300UI

ClockFrequency:0.8GHz<fc≤1.6GHzJitterAmplitude FMFrequency InputFrequency JitterAmplitude

2 UI 500kHz 55kHz 1UIp-p±0.3UI20 UI 55kHz 5.5kHz 10UIp-p±3UI200 UI 5.5kHz 550Hz 100UIp-p±30UI4000UI 550Hz 27.5Hz 1000UIp-p±300UI

ClockFrequency:1.6GHz<fc≤3.2GHzJitterAmplitude FMFrequency InputFrequency JitterAmplitude

2 UI 1MHz 110kHz 1UIp-p±0.3UI20 UI 110kHz 11kHz 10UIp-p±3UI200 UI 11kHz 1.1kHz 100UIp-p±30UI4000UI 1.1kHz 55Hz 1000UIp-p±300UI

ClockFrequency:3.2GHz<fc≤6.4GHzJitterAmplitude FMFrequency InputFrequency JitterAmplitude

2 UI 2MHz 220kHz 1UIp-p±0.3UI20 UI 220kHz 22kHz 10UIp-p±3UI200 UI 22kHz 2.2kHz 100UIp-p±30UI4000UI 2.2kHz 110Hz 1000UIp-p±300UI

ClockFrequency:6.4GHz<fc≤12.5GHzJitterAmplitude FMFrequency InputFrequency JitterAmplitude

2 UI 4MHz 440kHz 1UIp-p±0.3UI20 UI 440kHz 44kHz 10UIp-p±3UI200 UI 44kHz 4.4kHz 100UIp-p±30UI4000UI 4.4kHz 220Hz 1000UIp-p±300UI

TriangleWaveModulation

PCIe-GenI(2.5GHz)orPCIe-GenII(5GHz)ClockOutputFrequencySetting:SpreadMethodCenter/SpreadMethodDownselectableFrequencyOffset:–1000ppmto+1000ppm,Steps:1ppmModulationFrequencyAccuracy:31.25kHz±1000ppmFrequencyDeviation:±6.25MHz(PCIe-GenI,2.5GHz),±12.5MHz(PCIe-GenII,5GHz)DeviationAccuracy:±10%

∗1:ThemaximumjitteramplitudeislimitedaccordingtothejittertoleranceofPPGorEDmodules.RefertothejittertolerancespecificationofPPG/EDmodules.

Page 20: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

20 Product Brochure l MP1800A

MU181500B Jitter Modulation Source

ExternalClockInput

NumberofInput:1FrequencyRange: 6.400001GHzto12.500000GHz(MU181000A/B,Combination:On)

0.800000GHzto15.000000GHz(MU181000A/B,Combination:Off,orExternalsynthesizer)Amplitude:0.4Vp-pto1.0Vp-pConnector:SMA(f.),Termination:50Ω/ACCoupling

ExternalJitterInput

NumberofInput:1FrequencyRange:10kHzto1GHzAmplitude:0to2.0Vp-pConnector:SMA(f.),Termination:50Ω/GND

JitteredClockOutput

NumberofOutput:2FrequencyRange: 0.800001GHzto1.562500GHz(MU181000A/B,Combination:On),Steps:0.000001GHz

1.600001GHzto3.125000GHz(MU181000A/B,Combination:On),Steps:0.000001GHz 3.200001GHzto6.250000GHz(MU181000A/B,Combination:On),Steps:0.000001GHz 6.400001GHzto12.500000GHz(MU181000A/B,Combination:On),Steps:0.000001GHz 12.800002GHzto15.000000GHz(MU181000A/B,Combination:On),Steps:0.000002GHz 0.8GHzto15GHz(MU181000A/B,Combination:Off,orExternalsynthesizer)

FrequencyOffset: –1000ppmto+1000ppm(MU181000A/B,Combination:On),Steps:1ppm None(MU181000A/B,Combination:Off,orExternalsynthesizer)

Amplitude:0.4Vp-p(Min.),1.0Vp-p(Max.)IntrinsicJitter:≤350fs(4.25,7.0125,10,12.5,14,15GHz)Connector:SMA(f.),Termination:50Ω/ACCoupling

IQOutputNumberofOutput:2(I,Q)Amplitude:1Vp-p(Max.)Connector:SMA(f.),Termination:50Ω/GND

AUX Input

NumberofInput:1FrequencyRange:SamefrequencywithExternalClockInputAmplitude:0.4Vp-p(Min.),1.1Vp-p(Max.)Connector:SMA(f.),Termination:50Ω/ACCoupling

ReferenceClockOutput

NumberofOutput:2ReferenceClock: ExternalClockInputorAUXInput(MU181000A/B,Combination:On)

ExternalClockInput(MU181000A/B,Combination:Off,orExternalsynthesizer)FrequencyRange:1/NofJitteredClockOutputFrequency(N:1,2,or4)Amplitude: 0.4Vp-p(Min.),1.0Vp-p(Max.)(JitteredClockOutputFrequency:≥4GHz)

0.4Vp-p(Min.),1.2Vp-p(Max.)(JitteredClockOutputFrequency:<4GHz)Connector:SMA(f.),Termination:50Ω/ACCoupling

Sub-rateClockOutput

NumberofOutput:2(Differential)FrequencyRange:1/NofJitteredClockOutputFrequency(N:8to256,Steps:1)Amplitude:0.1Vp-pto0.7Vp-p,Steps:10mVAccuracy:±70mV±20%ofAmplitude(N:8)Connector:SMA(f.),Termination:50Ω/ACCoupling

Page 21: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 21

InternalSinusoidalJitter(SJ1)

JitterSettingMask∗1

JitteredClockOutputFrequency: 8.500001GHzto15GHz JitteredClockOutputFrequency: 4.000001GHzto8.5GHz

0.00001

0.5

8

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]1 10 250

0.00001

0.5

8

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 150

JitteredClockOutputFrequency: 1.200001GHzto4GHz JitteredClockOutputFrequency: 0.800001GHzto1.2GHz

0.00001

0.5

8

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 100

0.00001

0.5

8

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 50

ModulationFrequency(FM): 10Hzto10kHz,Steps: 1Hz 10kHzto100kHz,Steps: 10Hz 100kHzto1MHz,Steps: 100Hz 1MHzto10MHz,Steps: 1kHz 10MHzto100MHz,Steps: 10kHz 100MHzto250MHz,Steps: 100kHz

Accuracy: ±100ppmAmplitude∗1:JitteredClockOutputFrequency: 8.500001GHzto15GHz0to40UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to8UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI0to0.5UIp-p(FM: 10.01MHzto250MHz),Steps: 0.001UIJitteredClockOutputFrequency: 4.000001GHzto8.5GHz0to40UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to8UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI0to0.5UIp-p(FM: 10.01MHzto150MHz),Steps: 0.001UIJitteredClockOutputFrequency: 1.200001GHzto4GHz0to40UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to8UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI0to0.5UIp-p(FM: 10.01MHzto100MHz),Steps: 0.001UIJitteredClockOutputFrequency: 1.800001GHzto1.2GHz0to40UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to8UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI0to0.5UIp-p(FM: 10.01MHzto50MHz),Steps: 0.001UI

Accuracy: ±0.03UI±Q%(Amplitude: 0.002UIp-pto2.19UIp-p) ±0.2UI±Q%(Amplitude: 2.2UIp-pto21.9UIp-p) ±2UI±Q%(Amplitude: 22UIp-pto50UIp-p)

FM Q10Hz≤fm≤500kHz 7500kHz<fm≤2MHz 102MHz<fm≤80MHz 1380MHz<fm≤250MHz 15

On/OffFunction: Supported

Page 22: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

22 Product Brochure l MP1800A

InternalSinusoidalJitter(SJ1)[using MU181020A/B MU182020A/21A]

JitterSettingMask∗1

JitteredClockOutputFrequency:8.500001GHzto15GHzFullRateMode∗2 HalfRateMode∗2

Bit-rate:8.500001Gbit/sto15Gbit/s Bit-rate:17.000002Gbit/sto28.1Gbit/s

0.00001

0.5

8

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 250

0.00001

10

50

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 250

0.55

0.01 0.1 150

JitteredClockOutputFrequency:4.000001GHzto8.5GHzFullRateMode∗2 HalfRateMode∗2

Bit-rate:4.000001Gbit/sto8.5Gbit/s Bit-rate:8.000002Gbit/sto17Gbit/s

0.00001

0.5

8

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 150

0.00001

10

50

Modulation Frequency [MHz]Ji

tter A

mpl

itude

[UIp

-p]

1 10

0.55

0.01 0.1 150

JitteredClockOutputFrequency:1.200001GHzto4GHzFullRateMode∗2 HalfRateMode∗2

Bit-rate:1.200001Gbit/sto4Gbit/s Bit-rate:8Gbit/s

0.00001

0.5

8

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 100

0.00001

10

50

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10

0.55

0.01 0.1 100

JitteredClockOutputFrequency:0.800001GHzto1.2GHzFullRateMode∗2

Bit-rate:0.800 001 Gbit/s to 1.2 Gbit/s

0.00001

0.5

8

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 50

Page 23: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 23

InternalSinusoidalJitter(SJ1)[using MU181020A/B MU182020A/21A]

ModulationFrequency(FM): 10Hzto10kHz,Steps:1Hz 10kHzto100kHz,Steps:10Hz 100kHzto1MHz,Steps:100Hz 1MHzto10MHz,Steps:1kHz 10MHzto100MHz,Steps:10kHz 100MHzto250MHz,Steps:100kHz

Accuracy:±100ppmAmplitude∗1:FullRateMode∗2(UsingMU181020A/B,MU182020A/21A) Bit-rate:8.500001Gbit/sto15Gbit/s0to40UIp-p(FM:10Hzto1MHz),Steps:0.001UI0to8UIp-p(FM:1.001MHzto10MHz),Steps:0.001UI0to0.5UIp-p(FM:10.01MHzto250MHz),Steps:0.001UI Bit-rate:4.000001Gbit/sto8.5Gbit/s0to40UIp-p(FM:10Hzto1MHz),Steps:0.001UI0to8UIp-p(FM:1.001MHzto10MHz),Steps:0.001UI0to0.5UIp-p(FM:10.01MHzto150MHz),Steps:0.001UI Bit-rate:1.200001Gbit/sto4Gbit/s0to40UIp-p(FM:10Hzto1MHz),Steps:0.001UI0to8UIp-p(FM:1.001MHzto10MHz),Steps:0.001UI0to0.5UIp-p(FM:10.01MHzto100MHz),Steps:0.001UI Bit-rate:0.800 001 Gbit/s to 1.2 Gbit/s0to40UIp-p(FM:10Hzto1MHz),Steps:0.001UI0to8UIp-p(FM:1.001MHzto10MHz),Steps:0.001UI0to0.5UIp-p(FM:10.01MHzto50MHz),Steps:0.001UIHalfRateMode∗2(UsingMU182020A/21A) Bit-rate:17.000002Gbit/sto28.1Gbit/s0to50UIp-p(FM:10Hzto1MHz),Steps:0.002UI0to10UIp-p(FM:1.001MHzto10MHz),Steps:0.002UI0to0.55UIp-p(FM:10.01MHzto250MHz),Steps:0.002UI Bit-rate:8.000002Gbit/sto17Gbit/s0to50UIp-p(FM:10Hzto1MHz),Steps:0.002UI0to10UIp-p(FM:1.001MHzto10MHz),Steps:0.002UI0to0.55UIp-p(FM:10.01MHzto150MHz),Steps:0.002UI Bit-rate:8Gbit/s0to50UIp-p(FM:10Hzto1MHz),Steps:0.002UI0to10UIp-p(FM:1.001MHzto10MHz),Steps:0.002UI0to0.55UIp-p(FM:10.01MHzto100MHz),Steps:0.002UI

Accuracy: ±0.03UI±Q%(Amplitude:0.002UIp-pto2.19UIp-p) ±0.2UI±Q%(Amplitude:2.2UIp-pto21.9UIp-p) ±2UI±Q%(Amplitude:22UIp-pto50UIp-p)

FM Q10Hz≤fm≤500kHz 7500kHz<fm≤2MHz 102MHz<fm≤80MHz 1380MHz<fm≤250MHz 15

On/OffFunction:Supported

Page 24: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

24 Product Brochure l MP1800A

ExternalSinusoidalJitter(SJ1)[usingMU183020A/21A]

32G PPGFullrateClockOutsetting,Bit-rate:15Gbit/sto32.1Gbit/sHalfrateClockOutsetting,Bit-rate:2.4Gbit/sto32.1Gbit/s

MU181500B Jitter Setting Mask

MU183020A/21A Jitter Tolerance

2000

20016

101

0.00001 0.1 1 10 2500.0075

15

Jitte

r Am

plitu

de [U

Ip-p

]Modulation Frequency [MHz]

FullrateClockOutsetting,Bit-rate:4Gbit/sto15Gbit/s

2000

100

810

1

0.00001 0.1 1 10 2500.0075

15

1000

0.5

Jitte

r Am

plitu

de [U

Ip-p

]

Modulation Frequency [MHz]

MU181500B Jitter Setting Mask

MU183020A/21A Jitter Tolerance

FullrateClockOutsetting,Bit-rate:2.4Gbit/sto4Gbit/s

2000

50

810

1

0.00001 0.1 1 10 2500.0075

15

500

0.5

Jitte

r Am

plitu

de [U

Ip-p

]

Modulation Frequency [MHz]

MU181500B Jitter Setting Mask

MU183020A/21A Jitter Tolerance

32GPPG(FullrateClockOut,Bit-rate:4Gbit/sto15Gbit/s)0to1000UIp-p(FM:10Hzto100kHz),Steps:0.001UI0to100UIp-p(FM:100.1kHzto1MHz),Steps:0.001UI0to8UIp-p(FM:1.001MHzto10MHz),Steps:0.001UI0to0.5UIp-p(FM:10.01MHzto250MHz),Steps:0.001UI

32GPPG(FullrateClockOut,Bit-rate:2.4Gbit/sto4Gbit/s)0to500UIp-p(FM:10Hzto100kHz),Steps:0.001UI0to50UIp-p(FM:100.1kHzto1MHz),Steps:0.001UI0to8UIp-p(FM:1.001MHzto10MHz),Steps:0.001UI0to0.5UIp-p(FM:10.01MHzto250MHz),Steps:0.001UI

32GPPG(FullrateClockOut,Bit-rate:15Gbit/sto30Gbit/s,HalfrateClockOut,Bit-rate:2.4Gbit/sto30Gbit/s)0to2000UIp-p(FM:10Hzto100kHz),Steps:0.002UI0to50UIp-p(FM:100.1kHzto1MHz),Steps:0.002UI0to8UIp-p(FM:1.001MHzto10MHz),Steps:0.002UI0to0.5UIp-p(FM:10.01MHzto250MHz),Steps:0.002UI

32GPPG(FullrateClockOut,HalfrateClockOut,Bit-rate:30Gbit/sto32.1Gbit/s)0to2000UIp-p(FM:10Hzto100kHz),Steps:0.004UI0to200UIp-p(FM:100.1kHzto1MHz),Steps:0.004UI0to16UIp-p(FM:1.001MHzto10MHz),Steps:0.004UI0to1UIp-p(FM:10.01MHzto250MHz),Steps:0.004UI

Accuracy: ±0.03UI±Q%(Amplitude:0.001to2.199UIp-p) ±0.2UI±Q%(Amplitude:2.2to21.999UIp-p) ±2UI±Q%(Amplitude:22to219.999UIp-p) ±20UI±Q%(Amplitude:220to2000UIp-p)

FW Q10Hzto500kHz 7500.1kHzto2MHz 102.01MHzto80MHz 1380.01MHzto250MHz 15

On/OffFunction:supported

Page 25: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 25

ExternalSinusoidalJitter(SJ2)[MU181000A/B-001]

JitterSettingMask∗1

JitteredClockOutputFrequency: 6.400001GHzto15GHz JitteredClockOutputFrequency: 3.200001GHzto6.25GHzFullRateMode∗2 FullRateMode∗2

0.00001

0.4

6

40

Modulation Frequency [MHz]Ji

tter A

mpl

itude

[UIp

-p]

1 10 250

0.00001

0.2

3

20

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 150

JitteredClockOutputFrequency: 1.800001GHzto3.125GHz JitteredClockOutputFrequency: 1.600001GHzto1.8GHzFullRateMode∗2 FullRateMode∗2

0.00001

0.1

1.5

10

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 150

0.00001

0.1

1.5

10

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 100

JitteredClockOutputFrequency: 0.800001GHzto1.5625GHzFullRateMode∗2

0.00001

0.75

5

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10

ModulationFrequency(FM): 10Hzto10kHz,Steps: 1Hz 10kHzto100kHz,Steps: 10Hz 100kHzto1MHz,Steps: 100Hz 1MHzto10MHz,Steps: 1kHz 10MHzto100MHz,Steps: 10kHz 100MHzto250MHz,Steps: 100kHz

Accuracy: ±100ppmAmplitude∗1:FullRateMode∗2

JitteredClockOutputFrequency: 6.400001GHzto15GHz0to40UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to6UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI0to0.4UIp-p(FM: 10.01MHzto250MHz),Steps: 0.001UIJitteredClockOutputFrequency: 3.200001GHzto6.25GHz0to20UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to3UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI0to0.2UIp-p(FM: 10.01MHzto150MHz),Steps: 0.001UIJitteredClockOutputFrequency: 1.800001GHzto3.125GHz0to10UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to1.5UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI0to0.1UIp-p(FM: 10.01MHzto150MHz),Steps: 0.001UIJitteredClockOutputFrequency: 1.600001GHzto1.8GHz0to10UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to1.5UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI0to0.1UIp-p(FM: 10.01MHzto100MHz),Steps: 0.001UIJitteredClockOutputFrequency: 0.800001GHzto1.5625GHz0to5UIp-p(FM: 10Hzto1MHz),Steps: 0.01UI0to0.75UIp-p(FM: 1.001MHzto10MHz),Steps: 0.01UI

Accuracy: ±0.03UI±Q%(Amplitude: 0.002UIp-pto2.19UIp-p) ±0.2UI±Q%(Amplitude: 2.2UIp-pto21.9UIp-p) ±2UI±Q%(Amplitude: 22UIp-pto50UIp-p)

FM Q10Hz≤fm≤500kHz 10500kHz<fm≤2MHz 132MHz<fm≤80MHz 1580MHz<fm≤250MHz 18

On/OffFunction: Supported

Page 26: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

26 Product Brochure l MP1800A

ExternalSinusoidalJitter(SJ2)[using MU181000A/B-001 MU181020A/B MU182020A/21A MU183020A/21A]

JitterSettingMask∗1

JitteredClockOutputFrequency: 6.400001GHzto15GHzFullRateMode∗2 HalfRateMode∗2

Bit-rate:6.400001Gbit/sto15Gbit/s Bit-rate:12.800001Gbit/sto30Gbit/s QuarterRateMode Bit-rate:25.600004Gbit/sto32.1Gbit/s

0.00001

0.4

6

40

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 250

2000

50

10

1

0.00001 1 10 2500.0075

15

Jitte

r Am

plitu

de [U

Ip-p

]

Modulation Frequency [MHz]

0.55

MU181500B Jitter Setting MaskMU183020A/21A Jitter Tolerance

JitteredClockOutputFrequency: 3.200001GHzto6.25GHzFullRateMode∗2 HalfRateMode∗2

Bit-rate:3.200001Gbit/sto6.25Gbit/s Bit-rate:8Gbit/sto12.5Gbit/s

0.00001

0.2

3

20

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 150

2000

50

10

1

0.00001 1 10 2500.0075

15

0.4

150

Jitte

r Am

plitu

de [U

Ip-p

]Modulation Frequency [MHz]

MU181500B Jitter Setting MaskMU183020A/21A Jitter Tolerance

JitteredClockOutputFrequency: 1.800001GHzto3.125GHzFullRateMode∗2 HalfRateMode∗2

Bit-rate:1.800001Gbit/sto3.125Gbit/s Bit-rate:3.600002Gbit/sto6.25Gbit/s

0.00001

0.1

1.5

10

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 150

MU181500B Jitter Setting MaskMU183020A/21A Jitter Tolerance

2000

2510

1

0.00001 1 10 2500.0075

15

0.2150

5

Jitte

r Am

plitu

de [U

Ip-p

]

Modulation Frequency [MHz]

JitteredClockOutputFrequency: 1.600001GHzto1.8GHzFullRateMode∗2 HalfRateMode∗2

Bit-rate:1.600001Gbit/sto1.8Gbit/s Bit-rate:3.200002Gbit/sto3.6Gbit/s

0.00001

0.1

1.5

10

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10 100

MU181500B Jitter Setting MaskMU183020A/21A Jitter Tolerance

2000

25

10

1

0.00001 1 10 2500.0075

15

0.2100

5

Jitte

r Am

plitu

de [U

Ip-p

]

Modulation Frequency [MHz]

JitteredClockOutputFrequency: 0.800001GHzto1.5625GHzFullRateMode∗2 HalfRateMode∗2

Bit-rate:0.800001Gbit/sto1.5625Gbit/s Bit-rate:1.600002Gbit/sto3.125Gbit/s

0.00001

0.75

5

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

1 10

MU181500B Jitter Setting MaskMU183020A/21A Jitter Tolerance

2000

15

101

0.00001 1 10 2500.0075

12.5

Jitte

r Am

plitu

de [U

Ip-p

]

Modulation Frequency [MHz]

5

Page 27: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 27

ExternalSinusoidalJitter(SJ2)[using MU181000A/B-001 MU181020A/B MU182020A/21A MU183020A/21A]

ModulationFrequency(FM): 10Hzto10kHz,Steps: 1Hz 10kHzto100kHz,Steps: 10Hz 100kHzto1MHz,Steps: 100Hz 1MHzto10MHz,Steps: 1kHz 10MHzto100MHz,Steps: 10kHz 100MHzto250MHz,Steps: 100kHz

Accuracy: ±100ppmAmplitude∗1:FullRateMode∗2

Bit-rate: 6.400001Gbit/sto15Gbit/s0to40UIp-p(FM: 10Hzto1MHz),Steps: 0.001UI0to6UIp-p(FM: 1.001MHzto10MHz),Steps: 0.001UI0to0.4UIp-p(FM: 10.01MHzto250MHz),Steps: 0.001UIBit-rate: 3.200001Gbit/sto6.25Gbit/s0to20UIp-p(FM: 10Hzto1MHz),Steps: 0.001UI0to3UIp-p(FM: 1.001MHzto10MHz),Steps: 0.001UI0to0.2UIp-p(FM: 10.01MHzto150MHz),Steps: 0.001UIBit-rate: 1.800001Gbit/sto3.125Gbit/s0to10UIp-p(FM: 10Hzto1MHz),Steps: 0.001UI0to1.5UIp-p(FM: 1.001MHzto10MHz),Steps: 0.001UI0to0.1UIp-p(FM: 10.01MHzto150MHz),Steps: 0.001UIBit-rate: 1.600001Gbit/sto1.8Gbit/s0to10UIp-p(FM: 10Hzto1MHz),Steps: 0.001UI0to1.5UIp-p(FM: 1.001MHzto10MHz),Steps: 0.001UI0to0.1UIp-p(FM: 10.01MHzto100MHz),Steps: 0.001UIBit-rate: 0.800001Gbit/sto1.5625Gbit/s0to5UIp-p(FM: 10Hzto1MHz),Steps: 0.001UI0to0.75UIp-p(FM: 1.001MHzto10MHz),Steps: 0.001UI

HalfRateMode∗2

Bit-rate: 12.800 001 Gbit/s to 30 Gbit/s0to50UIp-p(FM: 10Hzto1MHz),Steps: 0.2UI0to10UIp-p(FM: 1.001MHzto10MHz),Steps: 0.02UI0to0.55UIp-p(FM: 10.01MHzto250MHz),Steps: 0.002UIBit-rate: 8Gbit/sto12.5Gbit/s0to50UIp-p(FM: 10Hzto1MHz),Steps: 0.2UI0to10UIp-p(FM: 1.001MHzto10MHz),Steps: 0.02UI0to0.4UIp-p(FM: 10.01MHzto150MHz),Steps: 0.002UIBit-rate: 3.600002Gbit/sto6.25Gbit/s0to25UIp-p(FM: 10Hzto1MHz),Steps: 0.2UI0to5UIp-p(FM: 1.001MHzto10MHz),Steps: 0.02UI0to0.2UIp-p(FM: 10.01MHzto150MHz),Steps: 0.002UIBit-rate: 3.200002Gbit/sto3.6Gbit/s0to25UIp-p(FM: 10Hzto1MHz),Steps: 0.2UI0to5UIp-p(FM: 1.001MHzto10MHz),Steps: 0.02UI0to0.2UIp-p(FM: 10.01MHzto100MHz),Steps: 0.002UIBit-rate: 1.600002Gbit/sto3.125Gbit/s0to12.5UIp-p(FM: 10Hzto1MHz),Steps: 0.2UI0to2.5UIp-p(FM: 1.001MHzto10MHz),Steps: 0.02UI

QuarterRateMode∗2

Bit-rate: 25.600004Gbit/sto32.1Gbit/s0to50UIp-p(FM: 10Hzto1MHz),Steps: 0.004UI0to10UIp-p(FM: 1.001MHzto10MHz),Steps: 0.004UI0to0.548UIp-p(FM: 10.01MHzto250MHz),Steps: 0.004UI

Accuracy: ±0.03UI±Q%(Amplitude: 0.002UIp-pto2.19UIp-p) ±0.2UI±Q%(Amplitude: 2.2UIp-pto21.9UIp-p) ±2UI±Q%(Amplitude: 22UIp-pto50UIp-p)

FM Q10Hz≤fm≤500kHz 10500kHz<fm≤2MHz 132MHz<fm≤80MHz 1580MHz<fm≤250MHz 18

On/OffFunction: Supported

SpreadSpectrumClocking(SSC)

Type: Down-Spread,Center-Spread,Up-SpreadModulationFrequency: 28kHzto34kHz,Steps: 1HzAccuracy: ±100ppmDeviation: 0to5300ppm,Steps: 1ppmOn/OffFunction: Supported

Page 28: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

28 Product Brochure l MP1800A

RandomJitter(RJ)

Bandwidth: 10kHzto1GHzCrestFactor: 16dBFilterTypeUserFilterFilter: 10MHz,20MHz,Through(HPF3dBbandwidth)

100MHz,Through(LPF3dBbandwidth)Amplitude∗1

FullRateMode∗2

JitteredClockOutputFrequency[GHz] SettingRange[UIp-p] Steps[mUI]≥2.5 0to0.5 2<2.5 0to0.2f 2

HalfRateMode∗3

JitteredClockOutputFrequency[GHz] SettingRange[UIp-p] Steps[mUI]≥2.5 0to0.5 4<2.5 0to0.2f 4

QuarterRateModeJitteredClockOutputFrequency[GHz] SettingRange[UIp-p] Steps[mUI]

≥2.5 0to0.496 4<2.5 0to0.2f 4

f: JitteredClockOutputFrequency[GHz]Accuracy: ±4.9ps±15%(JitteredClockOutputFrequency: ≥4GHz)

±7.0ps±15%(JitteredClockOutputFrequency: <4GHz)PCIe(Dataclocked)orPCIe(CommonRef.clock)FilterFilter: LF(10kHzto1.5MHz)orHF(1.5MHzto100MHz)forPCIeAmplitude∗1

FullRateMode∗2

JitteredClockOutputFrequency[GHz] LFandHFSettingRange[psrms] Steps[psrms]≥4 0 to 8.8 0.1

HalfRateMode∗2

JitteredClockOutputFrequency[GHz] LFandHFSettingRange[psrms] Steps[psrms]≥4 0 to 8.8 0.2

QuarterRateModeJitteredClockOutputFrequency[GHz] LFandHFSettingRange[psrms] Steps[psrms]

≥4 0 to 8.8 0.4LFAmplitude≥HFAmplitudeAccuracy: ±0.6ps±10%

On/OffFunction: Supported

BoundedUncorrelatedJitter(BUJ)

PRBSPatternLength: 2n–1(n=7,9,11,15,23,or31)BUJRate: 0.1Gbit/sto3.2Gbit/s,Steps: 1kbit/s

4.9Gbit/sto6.25Gbit/s,Steps: 1kbit/s(JitteredClockOutputFrequency: >4GHz) 9.8Gbit/sto12.5Gbit/s,Steps: 1kbit/s(JitteredClockOutputFrequency: >4GHz)

FilterType(LPF3dBBandwidth): 50,100,200,300,500MHz,Through(JitteredClockOutputFrequency: >4GHz) 50,100,200,300MHz,Through(JitteredClockOutputFrequency: ≤4GHz)

Amplitude∗1:FullRateMode∗2

JitteredClockOutputFrequency[GHz] SettingRange[UIp-p] Steps[mUI]≥2.5 0to0.5 2<2.5 0to0.2f 2

HalfRateMode∗2

JitteredClockOutputFrequency[GHz] SettingRange[UIp-p] Steps[mUI]≥2.5 0to0.5 4<2.5 0to0.2f 4

f: JitteredClockOutputFrequency[GHz]Accuracy: ±4.9ps±15%(JitteredClockOutputFrequency: ≥4GHz)

±7.0ps±15%(JitteredClockOutputFrequency: <4GHz)PRBSPatternLength: 2n–1(n=7,9)BUJRate: 6,5.5,4.9Gbit/s,LPF500MHzBUJRate: 3.2Gbit/s,3Gbit/s,LPF300MHzBUJRate: 3.2Gbit/s,2Gbit/s,LPF200MHzBUJRate: 2Gbit/s,1.1Gbit/s,LPF100MHz

On/OffFunction: Supported

ExternalJitter

Bandwidth: 10kHzto1GHzAccuracy∗3: 0.5UI±10%(2Vp-p)Linearity∗3: ±6ps±10%On/OffFunction: Supported

∗1: ThemaximumjitteramplitudeislimitedaccordingtothejittertoleranceofPPGorEDmodules.RefertothejittertolerancespecificationofPPG/EDmodules.∗2: FullRateMode: MU181020A/BPPGorMU182020A/21AMUXasaFullRate

HalfRateMode: MU182020A/21AMUXorMU183020A/21AasaHalfRate∗3: JitteredClockOutputFrequency: Specifiedas5GHz,ModulationFrequency: 0.5GHz,SinusoidalJitter

Page 29: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 29

MU181800A 12.5 GHz Clock DistributorFrequencyRange 0.1GHzto12.5GHz

ClockInputLevel:0.4Vp-pto2.0Vp-pWaveform:Squarewave(<0.5GHz),SquarewaveorSinewave(≥0.5GHz)Connector:SMA(f.),Termination:50Ω/GND

ClockOutput

4chSingle-endLevel:0.4Vp-p(Min.),1.0Vp-p(Max.)Duty:50±10%(50%ClockInputDuty)ChannelSkew:≤10ps(12.5GHz)Connector:SMA(f.),Termination:50Ω/GND

MU181800B 14 GHz Clock Distributor

FrequencyRange 0.1GHzto14GHz0.1GHzto14.1GHz[MU181800B-005]

ClockInputLevel:0.4Vp-pto2.0Vp-pWaveform:Squarewave(<0.5GHz),SquarewaveorSinewave(≥0.5GHz)Connector:SMA(f.),Termination:50Ω/GND

ClockOutput

5chSingle-endLevel:0.4Vp-p(Min.),1.0Vp-p(Max.)Duty:50±10%(50%ClockInputDuty)ChannelSkew:≤10ps(14GHz)Connector:SMA(f.),Termination:50Ω/GND

Page 30: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

30 Product Brochure l MP1800A

MU181020A 12.5 Gbit/s PPGMU181020A-0019.8Gbit/sto12.5Gbit/s MU181020A-0020.1Gbit/sto12.5Gbit/s

BitRate

9.8Gbit/sto12.5Gbit/s1/2Mode:4.9Gbit/sto6.25Gbit/s1/4Mode:2.45Gbit/sto3.125Gbit/s1/8Mode:1.225Gbit/sto1.5625Gbit/s

0.1Gbit/sto12.5Gbit/s

Built-inClock

9.8GHzto12.5GHz1/2Mode:4.9GHzto6.25GHz1/4Mode:2.45GHzto3.125GHz1/8Mode:1.225GHzto1.5625GHzSettingSteps:1kHz/1MHz

Nobuilt-inclocksource

ExternalClockInput

FrequencyRange: 9.8GHzto12.5GHzor (9.8GHzto12.5GHz)/64

Level:0.4Vp-p(Min.),2.0Vp-p(Max.)(–4to+10dBm)Waveform: Squarewave(<0.5GHz)

SquarewaveorSinewave(≥0.5GHz)Duty:50%Connector:SMA(f.),Termination:50Ω/ACCoupling

FrequencyRange:0.1GHzto12.5GHzLevel:0.4Vp-p(Min.),2.0Vp-p(Max.)(–4to+10dBm)Waveform: Squarewave(<0.5GHz)

SquarewaveorSinewave(≥0.5GHz)Duty:50%Connector:SMA(f.),Termination:50Ω/ACCoupling

Generation Pattern

PRBSSteps:2n –1(n=7,9,10,11,15,20,23,31)MarkRatio:1/2,1/4,1/8,0/8;1/2,3/4,7/8,8/8supportedatreverselogicANDBitShift:1bit,3bits(Prohibitedat1/2,1/2,0/8,8/8markratio)

ZeroSubstitutionPatternwithcontinuous0sappendedtoM-sequencesignal+1bitPattern:2n or 2n –1(n=7,9,10,11,15,20,23)0continuoussubstitutioncount:1to(patternlength–1)bitsOther:0atnextbitafter0substitutionchangedto1

DataDataLength:2to134217728bits/ch,Steps:1bit

AlternateDataLength:128to67108864bits/ch(independentbitsforA/B)Steps:128bitsLoopCount:511times(A/Bsetindependently) A/BSwitching: Auto-switchingbyA/Blooptimessetting(Internal)

Controlledbyexternalsignal(External)Editing:PatterneditingforA/Bindependently

Mixed PatternPattern:PRBS,Data–1toData–511 Data+PRBSLength:768to231 +134217728,Steps:128bits DataLength:512to134217728bits

SequencePatternBlockCount:1to128BlockLength:8192to1048576bits,Steps:128bitsLoopCount:1to1024times,RepeatBlockTransitionConditions:Apatternmatch,Bpatternmatch,Manual,LoopTimecomplete,Externaltrigger(risingedge)NextDestination:SpecifiedBlockNo.orStop

Error InsertionErrorEvent:Repeat,SingleErrorrate:#E–n(#=1to9,n=2to12)Timing:Internal/External

Auxiliary Input

ALTNTrigger/SequenceTrigger/ErrorInjection/BurstEnable(Switchable)MinimumPulseWidth:≥64bitswidthLevel:H:0V,L:–1V Connector:SMA(f.),Termination:50Ω/GND

AuxiliaryOutput

1/1Mode:1/nclock(2,4,8,9....,511) 1/2Mode:1/nclock(1,2,4,8,9....,255)1/4Mode:1/nclock(1,2,4,8,9....,127)1/8Mode:1/nclock(1,2,4,8,9....,63)PatternSync,BurstTriggerLevel:H:0V,L:–1V Connector:SMA(f.),Termination:50Ω/GND

1/nClock(n=2,4,8,9,10,11…….510,511)Pattern Sync,BurstTriggerLevel:H:0V,L:–1VConnector:SMA(f.),Termination:50Ω/GND

GatingOutput

BurstOutputSignalatBurst,TimingSignalatRepeat1chOutputLevel:H:0V,L:–1VConnector:SMA(f.),Termination:50Ω/GND

MU181020A-030VariableDataDelay[MU181020A-002]

Independent ModePhaseSettingRange:–1UIto+1UI,Steps:1mUI,Unit:UI/ps

CHSynchronizationorCombinationModePhaseSettingRange:–64UIto+64UI,Steps:1mUI,Unit:UI/ps

Page 31: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 31

MU181020A 12.5 Gbit/s PPG Amplitude OptionNoOption MU181020A-010 MU181020A-011 MU181020A-012 MU181020A-013

NumberofOutput 2(Data/Data)

DataOutput

Amplitude —

0.05Vp-pto0.8Vp-pSteps:2mVSettingAccuracy:±50mV±17%

0.25Vp-pto2.5Vp-p Steps:2mVSettingAccuracy:±50mV±17%

0.05Vp-pto2.0Vp-p Steps:2mVSettingAccuracy:±50mV±17%

0.5Vp-pto3.5Vp-p Steps:2mVSettingAccuracy:±50mV±17%

Offset — –2.0Vohto+3.3VohSteps:1mV

CurrentLimiting — Sourcing50mA,Sinking80mA

Level

MU181020A-001H:0V,L:–0.5V

MU181020A-002H:0V,L:–1.0V

— — — —

FixedInterface — NECL,SCFL,NCML,PCML,LVPECL(+3.3V),LVDS NECL,SCFL,NCML,PCML,LVPECL

Crosspoint 50±15% 30to70% Steps:1%

20to80% Steps:1%

20to90% Steps:0.1%

Tr/Tf

MU181020A-00130ps(typ.)(20to80%)(≥5Gbit/s)

MU181020A-00235ps(typ.)(20to80%)(≥5Gbit/s)

28ps(typ.)(20to80%)(≥5Gbit/s)

20ps(typ.)(20to80%)(10Gbit/s,12.5Gbit/s,Amplitude:2Vp-p)

25ps(typ.)(20to80%)(10Gbit/s, Amplitude:≥1Vp-p)

TotalJitter

MU181020A-00115ps(typ.)

MU181020A-00210ps(typ.)

MU181020A-00115psp-p(typ.)

MU181020A-00210psp-p(typ.)

MU181020A-00115psp-p(typ.)

MU181020A-0028psp-p(typ.)

MU181020A-001/0028psp-p(typ.)

Distortion (0-peak) — ±14%(typ.) ±25mV±6%(typ.) ±25mV±10%(typ.)

Connector SMA(f.) K(f.)

Termination GND/50Ω AC,DC DC:GND,–2V,+1.3V,+3.3V,Open(LVDS)/50Ω

AC,DCDC:GND,–2V, +1.3V,+3.3V/50Ω

On/OffFunction AlwaysOn Supported

MU181020A 12.5 Gbit/s PPG Clock OptionNoOption MU181020A-021DifferentialClockOutput

ClockOutput

NumberofOutput 1(Clock) 2(Clock/Clock)

Amplitude 0.25Vp-p(Min.),0.9Vp-p(Max.)(AC) 0.1Vp-pto2.0Vp-p,Steps:2mVDuty 50±15% 25to75,Steps:1Offset — –2.0Vohto+3.3Voh,Steps:1mVCurrentLimiting — Sourcing:50mA,Sinking:80mAFixedInterface — NECL,SCFL,NCML,PCML,LVPECL(+3.3V),LVDSTr/Tf 30ps(typ.)(20to80%) 24ps(typ.)(20to80%)

TotalJitter MU181020A-001:2ps(typ.)(RMS)MU181020A-002:1ps(typ.)(RMS)

MU181020A-001:2ps(typ.)(RMS)MU181020A-002:1ps(typ.)(RMS)

Connector SMA(f.) K(f.)

Termination GND/50Ω AC,DCDC:GND,–2V,+1.3V,+3.3V,Open(LVDS)/50Ω

On/OffFunction AlwaysOn Supported

Page 32: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

32 Product Brochure l MP1800A

MU181020B 14 Gbit/s PPGMU181020B-0020.1Gbit/sto14Gbit/s

BitRate 0.1Gbit/sto14Gbit/s0.1Gbit/sto14.1Gbit/s[MU181020B-005]

ExternalClockInput

FrequencyRange: 0.1GHzto14GHz 0.1GHzto14.1GHz[MU181020B-005]

Level:0.4Vp-p(Min.),1.5Vp-p(Max.)(–4to+7.5dBm)Waveform:Squarewave(<0.5GHz),SquarewaveorSinewave(≥0.5GHz)Duty:50%Connector:SMA(f.),Termination:50Ω/ACCoupling

Generation Pattern

PRBSSteps:2n–1(n=7,9,10,11,15,20,23,31)MarkRatio:1/2,1/4,1/8,0/8;1/2,3/4,7/8,8/8supportedatreverselogicANDBitShift:1bit,3bits(Prohibitedat1/2,1/2,0/8,8/8markratio)

ZeroSubstitutionPatternwithcontinuous0sappendedtoM-sequencesignal+1bitPattern:2n or 2n–1(n=7,9,10,11,15,20,23)0continuoussubstitutioncount:1to(patternlength–1)bitsOther:0atnextbitafter0substitutionchangedto1

DataDataLength:2to134217728bits/ch,Steps:1bit

AlternateDataLength:128to67108864bits/ch(independentbitsforA/B),Steps:128bitsLoopCount:511times(A/Bsetindependently)A/BSwitching: Auto-switchingbyA/Blooptimessetting(Internal)

Controlledbyexternalsignal(External)Editing:PatterneditingforA/Bindependently

Mixed PatternPattern:PRBS,Data–1toData–511Data+PRBSLength:768to231 +134217728,Steps:128bitsDataLength:512to134217728bits

SequencePatternBlockCount:1to128BlockLength:16384to1048576bits,Steps:128bitsLoopCount:1to1024times,RepeatBlockTransitionConditions:Apatternmatch,Bpatternmatch,Manual,LoopTimecomplete,Externaltrigger(risingedge)NextDestination:SpecifiedBlockNo.orStop

Error InsertionErrorEvent:Repeat,SingleErrorrate:#E–n(#=1to9,n=2to12)Timing:Internal/External

Auxiliary Input

ALTNTrigger/SequenceTrigger/ErrorInjection/BurstEnable(Switchable)MinimumPulseWidth:≥64bitwidthLevel:H:0V,L:–1VConnector:SMA(f.),Termination:50Ω/GND

AuxiliaryOutput

1/nClock(n=2,4,8,9,10,11…….,510,511)PatternSync,BurstTriggerLevel:H:0V,L:–1VConnector:SMA(f.),Termination:50Ω/GND

GatingOutput

BurstOutputSignalatBurst,TimingSignalatRepeat1chOutputLevel:H:0V,L:–1VConnector:SMA(f.),Termination:50Ω/GND

VariableDataDelay[MU181020B-030/130]

Independent ModePhaseSettingRange:–1UIto+1UI,Steps:1mUI,Unit:UI/ps

CHSynchronizationorCombinationModePhaseSettingRange:–64UIto+64UI,Steps:1mUI,Unit:UI/ps

OperationTemperatures 15°to35°C

Page 33: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 33

MU181020B 14 Gbit/s PPG Amplitude OptionNoOption MU181020B-011 MU181020B-012 MU181020B-013

NumberofOutput 2(Data/Data)

DataOutput

Amplitude —

0.25Vp-pto2.5Vp-pSteps:2mVSettingAccuracy:±50mV±17%

0.05Vp-pto2.0Vp-pSteps:2mVSettingAccuracy:±50mV±17%

0.5Vp-pto3.5Vp-p Steps:2mVSettingAccuracy:±50mV±17%

Offset — –2.0Vohto+3.3VohSteps:1mV

CurrentLimiting — Sourcing50mA,Sinking80mALevel H:0V,L:–1.0V — — —

FixedInterface — NECL,SCFL,NCML,PCML,LVPECL(+3.3V),LVDS NECL,SCFL,NCML,PCML,LVPECL

Crosspoint 50±15% 30to70%,Steps:1% 20to80%,Steps:1% 20to90%,Steps:0.1%

Tr/Tf 35ps(typ.)(20to80%)(≥5Gbit/s)

28ps(typ.)(20to80%) (≥5Gbit/s)

20ps(typ.)(20to80%)(10,12.5,14Gbit/s,Amplitude:2Vp-p)

25ps(typ.)(20to80%)(10Gbit/s,Amplitude:≥1Vp-p)

TotalJitter 10ps(typ.) 10psp-p(typ.) 8psp-p(typ.)Distortion (0-peak) — ±25mV±6%(typ.) ±25mV±10%(typ.)

Connector SMA(f.) K(f.)

Termination GND/50Ω AC,DC DC:GND,–2V,+1.3V,+3.3V,Open(LVDS)/50Ω

AC,DCDC:GND,–2V,+1.3V, +3.3V/50Ω

On/OffFunction AlwaysOn Supported

MU181020B 14 Gbit/s PPG Clock OptionNoOption MU181020B-021DifferentialClockOutput

ClockOutput

NumberofOutput 1(Clock) 2(Clock/Clock)

Amplitude 0.25Vp-p(Min.),0.9Vp-p(Max.)(AC) 0.1Vp-pto2.0Vp-p,Steps:2mVDuty 50±15% 25to75,Steps:1Offset — –2.0Vohto+3.3Voh,Steps:1mVCurrentLimiting — Sourcing:50mA,Sinking:80mAFixedInterface — NECL,SCFL,NCML,PCML,LVPECL(+3.3V),LVDSTr/Tf 30ps(typ.)(20to80%) 24ps(typ.)(20to80%)TotalJitter 1ps(typ.)(RMS) 1ps(typ.)(RMS)Connector SMA(f.) K(f.)

Termination GND/50Ω AC,DC DC:GND,–2V,+1.3V,+3.3V,Open(LVDS)/50Ω

On/OffFunction AlwaysOn Supported

Page 34: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

34 Product Brochure l MP1800A

MU181040A 12.5 Gbit/s EDMU181040A-0019.8Gbit/sto12.5Gbit/s MU181040A-0020.1Gbit/sto12.5Gbit/s

BitRate 9.8Gbit/sto12.5Gbit/s 0.1Gbit/sto12.5Gbit/s

ReceptionPattern

PRBSSteps:2n–1(n=7,9,10,11,15,20,23,31)MarkRatio:1/2,1/4,1/8,0/8;1/2,3/4,7/8,8/8supportedatreverselogicANDBitShift:1bit,3bits(Prohibitedat1/2,1/2,0/8,8/8markratio)

ZeroSubstitutionPatternwithcontinuous0sappendedtoM-sequencesignal+1bitPattern:2n or 2n–1(n=7,9,10,11,15,20,23)0continuoussubstitutioncount:1to(patternlength–1)bitsOther:0atnextbitafter0substitutionchangedto1

DataDataLength:2to134217728bits/ch,Steps:1bit

Mixed PatternPattern:PRBS,Data–1toData–511Data+PRBSLength:768to231 +134217728,Steps:128bitsDataLength:512to134217728bits

SequencePatternBlockCount:1to128

Detection Item TotalError,InsertionError,OmissionError,TransitionError,Non-TransitionErrorDisplay Item BitErrorRate,BitErrorCount,InputSignalFrequencyInput Signal Synchronization AutoSync.On/OffError Analysis InputSignalCapture(128Mbits),EyeMargin,EyeDiagram,QMeasurement,Bathtub,ISIAnalysisBurstSignalMeasurement BurstTrigger:Internal/ExternalInputOptionNumber NoOption MU181040A-020∗

ClockRecovery

FrequencyRange 9.8GHzto12.5GHz —

0.1GHz 0.125GHzto0.2GHz 0.25GHzto0.4GHz 0.5GHzto0.8GHz 1GHzto1.6GHz 2GHzto3.2GHz 4.25GHz 4.9GHzto6.25GHz 9.8GHzto12.5GHz

RecoveredClockOutput — —

POS/NEGreversible[withoutMU181040A-030]Amplitude:0.55±0.15Vp-pConnector:SMA(f.)

ClockInput

FrequencyRange — 0.1GHzto12.5GHz

ClockSourceWaveform —

Internal/External[MU181040A-020]Waveform: Squarewave(<0.5GHz)

SquarewaveorSinewave(≥0.5GHz)Duty:50%

NumberofInput — 1Level — 0.25Vp-p(Min.),2.0Vp-p(Max.)Connector — SMA(f.)

Termination —GND/50Ω,Variable/50Ω,Differential/100ΩNECL,PCML(+3.3V),LVPECL(+3.3V),GNDVariable:–2.5Vto+3.5V,Steps:10mV

Data Input

NumberofInput 2(Data,Data)SignalFormat NRZAmplitude 0.1Vp-p(Min.),0.9Vp-p(Max.) 0.1Vp-p(Min.),2.0Vp-p(Max.)Threshold –0.35Vto+0.35V,Steps:1mV –3.5Vto+3.3V,Steps:1mVSensitivity <50mVp-p(12.5Gbit/s,PRBS231 –1) 10mVp-p(typ.)(12.5Gbit/s,PRBS231 –1)Phase Margin — 60psp-p(typ.)(12.5Gbit/s,PRBS231 –1)Connector SMA(f.) K(f.)

Termination 50Ω/ACCouplingGND/50Ω,Variable/50Ω,Differential/100ΩNECL,PCML(+3.3V),LVPECL(+3.3V),GNDVariable:–2.5Vto+3.5V,Steps:10mV

Auxiliary Input

SequenceTrigger/CaptureTrigger/BurstEnable(switchable)MinimumPulseWidth:≥64bitwidthLevel:H:0V,L:–1VConnector:SMA(f.),Termination:50Ω/GND

AuxiliaryOutput 1/16Clock,1/32Clock,1/64Clock,PatternSync,Error,SyncGainLevel:H:0V,L:–1V

1/NClock(N=8to511),Steps:1,PatternSync,Error,SyncGainLevel:H:0V,L:–1V

Data Monitor Output

NumberofOutput — 2(Data,Data)

InsertionLoss — –6dB+1/–2dBConnector — SMA(f.)Termination — 50Ω/ACCoupling

MU181040A-030VariableClockDelay[MU181040A-002] — PhaseSettingRange:–1UIto+1UI,Steps:1mUI,Unit:UI/ps

∗:WerecommendaddingtheoptionofMU181040A/B-030/130VariableClockDelaywhenusingMU181040A/B-020/120ClockRecovery.

Page 35: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 35

MU181040B 14 Gbit/s EDMU181040B-0020.1Gbit/sto14Gbit/s

BitRate 0.1Gbit/sto14Gbit/s0.1Gbit/sto14.1Gbit/s[MU181040B-005]

ReceptionPattern

PRBSSteps:2n–1(n=7,9,10,11,15,20,23,31) MarkRatio:1/2,1/4,1/8,0/8;1/2,3/4,7/8,8/8supportedatreverselogic ANDBitShift:1bit,3bits(Prohibitedat1/2,1/2,0/8,8/8markratio)

ZeroSubstitutionPatternwithcontinuous0sappendedtoM-sequencesignal+1bit Pattern:2n or 2n–1(n=7,9,10,11,15,20,23) 0continuoussubstitutioncount:1to(patternlength–1)bits Other:0atnextbitafter0substitutionchangedto1

DataDataLength:2to134217728bits/ch,Steps:1bit

Mixed PatternPattern:PRBS,Data–1toData–511Data+PRBSLength:768to231 +134217728,Steps:128bitsDataLength:512to134217728bits

SequencePatternBlockCount:1to128

Detection Item TotalError,InsertionError,OmissionError,TransitionError,Non-TransitionErrorDisplay Item BitErrorRate,BitErrorCount,InputSignalFrequencyInput Signal Synchronization AutoSync.:On/OffError Analysis InputSignalCapture(128Mbits),EyeMargin,EyeDiagram,QMeasurement,Bathtub,ISIAnalysisBurstSignalMeasurement BurstTrigger:Internal/ExternalInputOptionNumber NoOption MU181040B-020∗

ClockRecovery

FrequencyRange —

0.1GHz,0.125GHzto0.2GHz,0.25GHzto0.4GHz, 0.5GHzto0.8GHz,1GHzto1.6GHz,2GHzto3.2GHz, 4.25GHz,4.9GHzto6.25GHz,9.8GHzto12.5GHz

RecoveredClockOutput —

POS/NEGreversible[withoutMU181040B-030]Amplitude:0.55±0.15Vp-pConnector:SMA(f.)

ClockInput

FrequencyRange: 0.1GHzto14GHz 0.1GHzto14.1GHz[MU181040B-005]

ClockSourceWaveform: Internal/External[MU181040B-020] Waveform:Squarewave(<0.5GHz),SquarewaveorSinewave(≥0.5GHz) Duty50%

NumberofInput:1Level:0.25Vp-p(Min.),1.5Vp-p(Max.)Connector:SMA(f.)Termination: GND/50Ω,Variable/50Ω,Differential/100Ω

NECL,PCML(+3.3V),LVPECL(+3.3V),GND Variable:–2.5Vto+3.5V,Steps:10mV

Data Input

NumberofInput:2(Data,Data)SignalFormat:NRZAmplitude:0.1Vp-p(Min.),2.0Vp-p(Max.)Threshold:–3.5Vto+3.3V,Steps:1mVInputSensitivity:20mVp-p(typ.)(14Gbit/sPRBS231 –1)PhaseMargin:50psp-p(typ.)(14Gbit/sPRBS231 –1)Connector:K(f.)Termination: GND/50Ω,Variable/50Ω,Differential/100Ω

NECL,PCML(+3.3V),LVPECL(+3.3V),GND Variable:–2.5Vto+3.5V,Steps:10mV

Auxiliary Input

SequenceTrigger/CaptureTrigger/BurstEnable(switchable)MinimumPulseWidth:≥64bitwidthLevel:H:0V,L:–1VConnector:SMA(f.),Termination:50Ω/GND

AuxiliaryOutput1/NClock(N=8to511),Steps:1Pattern Sync, Error, Sync GainLevel:H:0V,L:–1V

DataMonitorOutputNumberofOutput:2(Data,Data)InsertionLoss:–6dB+1/–2.5dBConnector:SMA(f.),Termination:50Ω/ACCoupling

VariableClockDelay[MU181040B-030/130] PhaseSettingRange:–1UIto+1UI,Steps:1mUI,Unit:UI/ps

OperationTemperatures 15°to35°C

∗:WerecommendaddingtheoptionofMU181040A/B-030/130VariableClockDelaywhenusingMU181040A/B-020/120ClockRecovery.

Page 36: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

36 Product Brochure l MP1800A

MU182020A 25 Gbit/s 1ch MUX

BitRate8Gbit/sto25Gbit/s8Gbit/sto28Gbit/s[MU182020A-001]8Gbit/sto28.1Gbit/s[MU182020A-001,003]

ExternalClockInput

FrequencyRange: 4.0GHzto12.5GHz 4.0GHzto14.0GHz[MU182020A-001] 4.0GHzto14.05GHz[MU182020A-001,003] 4.0GHzto12.5GHz,8.0GHzto25.0GHz[MU182020A-002] 4.0GHzto14.0GHz,8.0GHzto28.0GHz[MU182020A-001,002] 4.0GHzto14.05GHz,8.0GHzto28.1GHz[MU182020A-001,002,003]

Amplitude:0.3Vp-pto1.0Vp-pConnector: SMA(f.)

K(f.)[MU182020A-002]

DataOutput∗

NumberofOutput:2(Data,xData)Amplitude: 0.25Vp-pto1.75Vp-p,Steps:2mV[MU182020A-010]

0.5Vp-pto2.5Vp-p,Steps:2mV[MU182020A-011] 0.5Vp-pto3.5Vp-p,Steps:2mV[MU182020A-013]

AmplitudeSettingAccuracy:±50mV±17%(Crosspoint:50%or30to80%,25Gbit/s)Offset:–2.0Vohto+3.3Voh,Steps:1mVCrossPointAdjust:20to80%,Steps:0.1%(25Gbit/s)Tr/Tf:12ps(typ.)(20to80%)TotalJitter:8psp-p(typ.)Distortion(0-peak):±25mV±10%(typ.)(25Gbit/s)Connector:K(f.)On/OffFunction:Supported

ClockOutput

Frequency:OutputclockfrequencyissameofinputclockfrequencyNumberofOutput:1(Clock)Amplitude: 0.3Vp-p(Min.),1.0Vp-p(Max.)(Fixed)

0.7Vp-p(Min.),1.0Vp-p(Max.)(Fixed)[MU182020A-002] 0.5Vp-pto2.0Vp-p,Steps:2mV[MU182020A-021]

Offset:–2.0Vohto+3.3Voh,Steps:1mV[MU182020A-021]Duty:–25to+25,Steps:1[MU182020A-021]Connector: SMA(f.)

K(f.)[MU182020A-002or021]On/OffFunction:Supported[MU182020A-002or021]

1/2 Data InputNumberofInput:2(1/2DataInputA,1/2DataInputB)Amplitude:0V,–1.0VConnector:SMA(f.)

1/2ClockInputNumberofInput:1Amplitude:0.25Vp-pto1.0Vp-pConnector:SMA(f.)

1/2ClockOutputNumberofOutput:2Amplitude:0.4Vp-p(Min.),1.2Vp-p(Max.)Connector:SMA(f.)

DataOutputDelay[MU182020A-030or031]

PhaseVariableRange:–2000mUIto+2000mUI,Steps:2mUIPhaseSettingError:50mUIp-p(typ.)

OperationTemperatures 15°to35°C

∗:Theabovespecificationsweremeasuredwiththeoscilloscope,intrinsicjittershouldbelessthan200fs(rms),andmorethan70GHzbandwidth.

Page 37: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 37

MU182040A 25 Gbit/s 1ch DEMUX

BitRate8Gbit/sto25Gbit/s8Gbit/sto28Gbit/s[MU182040A-001]8Gbit/sto28.1Gbit/s[MU182040A-001,003]

ExternalClockInput

FrequencyRange: 4.0GHzto12.5GHz 4.0GHzto14.0GHz[MU182040A-001] 4.0GHzto14.05GHz[MU182040A-001,003] 4.0GHzto12.5GHz,8.0GHzto25.0GHz[MU182040A-002] 4.0GHzto14.0GHz,8.0GHzto28.0GHz[MU182040A-001,002] 4.0GHzto14.05GHz,8.0GHzto28.1GHz[MU182040A-001,002,003]

Amplitude:0.3Vp-pto1.0Vp-pConnector: SMA(f.)

K(f.)[MU182040A-002]

Data Input

SignalFormat:NRZNumberofInput: 2(Data,xData)

Single-ended/DifferentialselectableAmplitude:0.25Vp-pto2.0Vp-pThresholdVoltage:–3.5Vto+3.3V,Steps:1mVSensitivity:50mVp-p(typ.)(25Gbit/s,PRBS31)PhaseMargin:28ps(typ.)(25Gbit/s,PRBS31)Connector:K(f.)Termination:50Ω/GND,50Ω/Variable(–2.5Vto+3.5V)

1/2DataOutputNumberofOutput:2(1/2DataA,1/2DataB)Amplitude:0V,–0.4VConnector:SMA(f.)

1/2ClockOutputNumberofOutput:2Amplitude:0.4Vp-p(Min.),1.2Vp-p(Max.)Connector:SMA(f.)

VariableClockDelay[MU182040A-030or031]

PhaseVariableRange:–2000mUIto+2000mUI,Steps:2mUIPhaseSettingError:50mUIp-p(typ.)

AutoSearchFunction SupportedOperationTemperatures 15°to35°C

Page 38: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

38 Product Brochure l MP1800A

MU182021A 25 Gbit/s 2ch MUX

BitRate8Gbit/sto25Gbit/s8Gbit/sto28Gbit/s[MU182021A-001]8Gbit/sto28.1Gbit/s[MU182021A-001,003]

ExternalClockInput

FrequencyRange: 4.0GHzto12.5GHz 4.0GHzto14.0GHz[MU182021A-001] 4.0GHzto14.05GHz[MU182021A-001,003] 4.0GHzto12.5GHz,8.0GHzto25.0GHz[MU182021A-002] 4.0GHzto14.0GHz,8.0GHzto28.0GHz[MU182021A-001,002] 4.0GHzto14.05GHz,8.0GHzto28.1GHz[MU182021A-001,002,003]

Amplitude:0.3Vp-pto1.0Vp-pConnector: SMA(f.)

K(f.)[MU182021A-002]

DataOutput∗

NumberofOutput:4(Data1,xData1,Data2,xData2)Amplitude: 0.25Vp-pto1.75Vp-p,Steps:2mV[MU182021A-010]

0.5Vp-pto2.5Vp-p,Steps:2mV[MU182021A-011] 0.5Vp-pto3.5Vp-p,Steps:2mV[MU182021A-013]

AmplitudeSettingAccuracy:±50mV±17%(Crosspoint:50%or30to80%,25Gbit/s)Offset:–2.0Vohto+3.3Voh,Steps:1mVCrossPointAdjust:20to80%,Steps:0.1%(25Gbit/s)Tr/Tf:12ps(typ.)(20to80%)TotalJitter:8psp-p(typ.)Distortion(0-peak):±25mV±10%(typ.)(25Gbit/s)Connector:K(f.)On/OffFunction:Supported

ClockOutput

Frequency:OutputclockfrequencyissameofinputclockfrequencyNumberofOutput: 1(Clock)

2(Clock/xClock)[MU182021A-021]Amplitude: 0.3Vp-p(Min.),1.0Vp-p(Max.)(Fixed)

0.7Vp-p(Min.),1.0Vp-p(Max.)(Fixed)[MU182021A-002] 0.5Vp-pto2.0Vp-p,Steps:2mV[MU182021A-021]

Offset:–2.0to+3.3Voh,Steps:1mV[MU182021A-021]Duty:–25to+25,Steps:1[MU182021A-021]Connector: SMA(f.)

K(f.)[MU182021A-002or021]On/OffFunction:Supported[MU182021A-002or021]

1/2 Data InputNumberofInput:4(1/2Data1A,1/2Data1B,1/2Data2A,1/2Data2B)Amplitude:0V,–1.0VConnector:SMA(f.)

1/2ClockInputNumberofInput:1Amplitude:0.25Vp-pto1.0Vp-pConnector:SMA(f.)

1/2ClockOutputNumberofOutput:4Amplitude:0.4Vp-p(Min.),1.2Vp-p(Max.)Connector:SMA(f.)

DataOutputDelay[MU182021A-030or031]

PhaseVariableRange:–64000mUIto+64000mUI,Steps:2mUIPhaseSettingError:50mUIp-p(typ.)SkewBetweenData1and2

EmphasisControl Supported[MU182021A-040]OperationTemperatures 15°to35°C

∗:Theabovespecificationsweremeasuredwiththeoscilloscope,intrinsicjittershouldbelessthan200fs(rms),andmorethan70GHzbandwidth.

Page 39: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 39

MU182041A 25 Gbit/s 2ch DEMUX

BitRate8Gbit/sto25Gbit/s8Gbit/sto28Gbit/s[MU182041A-001]8Gbit/sto28.1Gbit/s[MU182041A-001,003]

ExternalClockInput

FrequencyRange: 4.0GHzto12.5GHz 4.0GHzto14.0GHz[MU182041A-001] 4.0GHzto14.05GHz[MU182041A-001,003] 4.0GHzto12.5GHz,8.0GHzto25.0GHz[MU182041A-002] 4.0GHzto14.0GHz,8.0GHzto28.0GHz[MU182041A-001,002] 4.0GHzto14.05GHz,8.0GHzto28.1GHz[MU182041A-001,002,003]

Amplitude:0.3Vp-pto1.0Vp-pConnector: SMA(f.)

K(f.)[MU182041A-002]

Data Input

SignalFormat:NRZNumberofInput: 4(Data1,xData1,Data2,xData2)

Single-ended/DifferentialselectableAmplitude:0.25Vp-pto2.0Vp-pThresholdVoltage:–3.5Vto+3.3V,Steps:1mVSensitivity:50mV(typ.)(25Gbit/s,PRBS31)PhaseMargin:28ps(typ.)(25Gbit/s,PRBS31)Connector:K(f.)Termination:50Ω/GND,50Ω/Variable(–2.5Vto+3.5V)

1/2DataOutputNumberofOutput:4(1/2Data1A,1/2Data1B,1/2Data2A,1/2Data2B)Amplitude:0V,–0.4VConnector:SMA(f.)

1/2ClockOutputNumberofOutput:4Amplitude:0.4Vp-p(Min.),1.2Vp-p(Max.)Connector:SMA(f.)

VariableClockDelay[MU182041A-030or031]

PhaseVariableRange:–2000mUIto+2000mUI,Steps:2mUIPhaseSettingError:50mUIp-p(typ.)

AutoSearchFunction SupportedOperationTemperatures 15°to35°C

Page 40: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

40 Product Brochure l MP1800A

MU183020A 28G/32G bit/s PPG, MU183021A 28G/32G bit/s 4ch PPG

BitRate OperationalBit-rateRange: 2.4Gbit/sto28.1Gbit/s 2.4Gbit/sto32.1Gbit/s(withOption-x01)

Bit-rateSettingRange(MU181000A/Bsynchronizedoperation)

ThisitemisspecifiedwhenMU181000AorMU181000Bisinstalledintothesamemainframe.WhenFullRateClockOutputisselected:

2.400000Gbit/sto12.500000Gbit/s,0.000001Gbit/sstep 12.500002Gbit/sto25.000000Gbit/s,0.000002Gbit/sstep 25.000004Gbit/sto28.100000Gbit/s,0.000004Gbit/sstep 25.000004Gbit/sto32.100000Gbit/s,0.000004Gbit/sstep(withOption-x01)Offset:–1000ppmto+1000ppm,1ppmstep

(OffsetsettingrangeischangeddependsonBit-rate. Offsetrangeis–1000ppmto0ppmwithfollowingBit-raterange. FullRate:12.500000Gbit/s,25.000000Gbit/s,HalfRate:25.000000Gbit/s)

WhenHalfRateClockOutputisselected: 2.400000Gbit/sto25.000000Gbit/s,0.000002Gbit/sstep 25.000004Gbit/sto28.100000Gbit/s,0.000004Gbit/sstep 25.000004Gbit/sto32.100000Gbit/s,0.000004Gbit/sstep(withOption-x01)Offset:–1000ppmto+1000ppm,1ppmstep

(OffsetsettingrangeischangeddependsonBit-rate. Offsetrangeis–1000ppmto0ppmwithfollowingBit-raterange. FullRate:12.500000Gbit/s,25.000000Gbit/s,HalfRate:25.000000Gbit/s)

Bit-rateSettingRange(MU181000A/BandMU181500Bsynchronizedoperation)

ThisitemisspecifiedwhenMU181000AandMU181500Bareinstalledtothesamemainframe.WhenFullRateClockOutputisselected:

2.400000Gbit/sto3.125000Gbit/s,0.000001Gbit/sstep 3.200001Gbit/sto6.250000Gbit/s,0.000001Gbit/sstep 6.400001Gbit/sto12.500000Gbit/s,0.000001Gbit/sstep 12.800002Gbit/sto25.000000Gbit/s,0.000002Gbit/sstep 25.600004Gbit/sto28.100000Gbit/s,0.000004Gbit/sstep 25.600004Gbit/sto32.100000Gbit/s,0.000004Gbit/sstep(withOption-x01)Offset:–1000ppmto+1000ppm,1ppmstep

(OffsetsettingrangeischangeddependsonBit-rate. Offsetrangeis–1000ppmto0ppmwithfollowingBit-raterange. FullRate:12.500000Gbit/s,25.000000Gbit/s,HalfRate:25.000000Gbit/s)

WhenHalfRateClockOutputisselected: 2.400000Gbit/sto3.125000Gbit/s,0.000002Gbit/sstep 3.200002Gbit/sto6.250000Gbit/s,0.000002Gbit/sstep 6.400002Gbit/sto12.500000Gbit/s,0.000002Gbit/sstep 12.800002Gbit/sto25.000000Gbit/s,0.000002Gbit/sstep 25.600004Gbit/sto28.100000Gbit/s,0.000004Gbit/sstep 25.600004Gbit/sto32.100000Gbit/s,0.000004Gbit/sstep(withOption-x01)Offset:–1000ppmto+1000ppm,1ppmstep

(OffsetsettingrangeischangeddependsonBit-rate. Offsetrangeis–1000ppmto0ppmwithfollowingBit-raterange. FullRate:12.500000Gbit/s,25.000000Gbit/s,HalfRate:25.000000Gbit/s)

Bit-rateSettingRange(withexternalclocksource)

Thisitemisspecifiedwhenexternalclocksourceisused.WhenFullRateClockOutputisselected:

OperatingBit-rateRange InputClockFrequency Bit-rate/ClockDivideRatio2.4Gbit/sto16.0Gbit/s 2.4GHzto16.0GHz 1/1Clock16.0Gbit/sto20.4Gbit/s 8.0GHzto10.2GHz 1/2Clock20.0 Gbit/s to 28.1 Gbit/s∗1 10.0GHzto14.05GHz 1/2Clock20.0 Gbit/s to 32.1 Gbit/s∗2 10.0GHzto16.05GHz 1/2Clock25.0Gbit/sto28.1Gbit/s∗1 6.25GHzto7.025GHz 1/4Clock25.0Gbit/sto32.1Gbit/s∗2 6.25GHzto8.025GHz 1/4Clock

WhenHalfRateClockOutputisselected:OperatingBit-rateRange InputClockFrequency Bit-rate/ClockDivideRatio2.4Gbit/sto28.1Gbit/s∗1 1.2GHzto14.05GHz 1/2Clock2.4Gbit/sto32.1Gbit/s∗2 1.2GHzto16.05GHz 1/2Clock25.0Gbit/sto28.1Gbit/s∗1 6.25GHzto7.025GHz 1/4Clock25.0Gbit/sto32.1Gbit/s∗2 6.25GHzto8.025GHz 1/4Clock

∗1:Upto28.1Gbit/swhenOption-x01isnotinstalled.∗2:Option-x01mustbeinstalled.

Bit-rateSettingRange(MU181500Bsynchronizedoperationwithexternalclocksource)

ThisitemisspecifiedwhenMU181000Bisinstalledintothesamemainframeandexternalclocksourceisused.WhenFullRateClockOutputisselected:

OperatingBit-rateRange InputClockFrequency Bit-rate/ClockDivideRatio2.4Gbit/sto15.0Gbit/s 2.4GHzto15.0GHz 1/1Clock15.0Gbit/sto20.0Gbit/s 7.5GHzto10.0GHz 1/2Clock20.0 Gbit/s to 28.1 Gbit/s∗1 10.0GHzto14.05GHz 1/2Clock20.0 Gbit/s to 30.0 Gbit/s∗2 10.0GHzto16.05GHz 1/2Clock30.0 Gbit/s to 32.1 Gbit/s∗2 7.5GHzto8.025GHz 1/4Clock

WhenHalfRateClockOutputisselected:OperatingBit-rateRange InputClockFrequency Bit-rate/ClockDivideRatio2.4Gbit/sto28.1Gbit/s∗1 1.2GHzto14.05GHz 1/2Clock2.4Gbit/sto30.0Gbit/s∗2 1.2GHzto15.0GHz 1/2Clock

30.0 Gbit/s to 32.1 Gbit/s∗2 7.5GHzto8.025GHz 1/4Clock

∗1:Upto28.1Gbit/swhenOption-x01isnotinstalled.∗2:Option-x01mustbeinstalled.

Page 41: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 41

ExternalClockInput

NumberofInput:1(Singleend)Frequency:1.2GHzto16.05GHz∗Amplitude:0.3Vp-pto1.0Vp-p(–6.5to+4.0dBm)Termination:50Ω/ACCouplingConnector:SMA(f.)

Aux Input

NumberofInput:1(Singleend)SignalType:ErrorInjection,BurstMinimumPulseWidth:1/128Inputlevel:0/–1V(H:–0.25Vto0.05V,L:–1.1Vto–0.8V)Termination:50Ω/GNDConnector:SMA(f.)

AuxOutput

NumberofOutput:2(Differential)SignalType:1/nClock(n=4,6,8,10···510,512),PatternSync,BurstOut2Outputlevel:0/–0.6V(H:–0.25Vto0.05V,L:–0.80Vto–0.45V)Termination:50Ω/GNDConnector:SMA(f.)

GatingOutput

Burst,RepeatTimingSignalOutputlevel:0/–1V(H:–0.25Vto0.05V,L:–1.25Vto–0.8V)Termination:50Ω/GNDConnector:SMA(f.)

Pattern Generation

PRBSPatternlength:2n–1(n=7,9,10,11,15,20,23,31)Markratio:1/2(1/2INVissupportedbyalogicinversion)

Zero-Substitution:Patternwithcontinuous0sappendedtoM-sequencesignal+1bitPattern:2n or 2n–1(n=7,9,10,11,15,20,23)0continuoussubstitutioncount:1to(patternlength–1)bits0atnextbitafter0substitutionchangedto1

DataDatalength:2bitsto268435456bits,1bitstep

Mixed PatternPattern:PRBS,Data–1toData–511MixedRowLength(Data+PRBSLength):1536to2415919104,256bitsstepDatalength:1024bitsto268435456bits,1bitstepPRBSlength/MarkRatio:SameasPRBSPRBSSequence:Restart,Consecutive

PatternSequence

Repeat:ContinuousPatternBurstBurstCycle:25600bitsto2147483648bits,256bitsstepEnable periodInternal:12800bitsto2147483392bits,256bitsstepExtTrigger,Enable:12800bitsto2147483648bits,256bitsstep

Pre-code

Pre-codefunction:ONandOFFType: DQPSK(MU183020A,MU183021A)

DP-QPSK(MU183021A)InitialData:0or1selectable

Error AdditionTiming:Internal,externaltriggerErrorevent:Repeat,SingleErrorrate:a×10–b(a=1to9,b=3to12),Upperlimit:5E-3

∗:TheclockfrequencyfromexternalclocksourceshallbechangeddependsontheBit-ratesetting.PleaseseeBit-ratesettingrange.

Page 42: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

42 Product Brochure l MP1800A

DataOutput∗1

MU183020A-x12 MU183020A-x13 MU183021A-x22 MU183021A-x23

NumberofOutputs 2: Data,XData(Independent) 4: Data1,XData1,Data2,XData2 (Independent)

OutputAmplitude 0.5Vp-pto2.0Vp-p2mVstep

0.5Vp-pto3.5Vp-p2mVstep

0.5Vp-pto2.0Vp-p2mVstep

0.5Vp-pto3.5Vp-p2mVstep

MU183021A-x12 MU183021A-x13NumberofOutputs 8:Data,XData(Independent)

OutputAmplitude 0.5Vp-pto2.0Vp-p2mVstep

0.5Vp-pto3.5Vp-p2mVstep

Outputamplitudesettingerror:±50mV±17%ofsettingamplitude∗2

Offset:–2.0Vohto+3.3Voh,1mVstepCurrentlimitation:Sourcing50mA,Sinking80mACrosspointsettingrange:20to80%/0.1%step:at1.0Vp-ptoupperlimitofoutputamplitudesetting30to70%/0.1%step:at0.5Vp-pto0.998Vp-p

Tr/Tf12ps(20to80%)∗3, ∗4,∗5

Jitter(p-p):8psp-p∗3, ∗4,∗5,∗6,∗10

Jitter(RMS):700fs∗3, ∗4,∗5,∗6

WaveformDistortion(0-peak):±25mV±15%∗3, ∗4,∗5

Output:On/OffselectableInterchannelskew:±0.25UI∗6,∗7,∗8

Termination:AC/DC50ΩConnector:K(f.)

ClockOutput∗9

Numberofoutput:1FullRate:Clockfrequencyissameasbit-ratewhenFullRateClockOutputisselected.2.4GHzto28.1GHz2.4GHzto32.1GHz(Option-x01)

HalfRate:Clockfrequencyishalfofbit-ratewhenHalfRateClockOutputisselected.1.2GHzto14.05GHz1.2GHzto16.05GHz(Option-x01)

Ampligude:0.3Vp-pto1.0Vp-pOutput:On/OffselectableTermination:50Ω/ACCouplingConnector:K(f.)

Delay(MU183020A-x30,x31MU183021A-x30)

Phasevariablerange:–1000mUIto+1000mUI,2mUIstepPhasesettingerror:±50mUIp-p∗5,∗6(Bitrate≤28.1Gbit/s),±75mUIp-p∗5,∗6(Bitrate>28.1Gbit/s)

∗1: Unlessotherwisespecified,thesearedefinedwithPRBS231–1,MarkRatio1/2,Cross-point50%,usinganoptionalaccessories(J1439Acoaxialcable,0.8m,Kconnector)andasamplingoscilloscopewhichhas70GHzbandwidth.

∗2: ThisvalueisassuredwhenCrosspointissetto50%orwithintherangeof30to80%andBitrateissetto25or28.1Gbit/s.∗3: WithoutOption-x01:at28.1Gbit/s

WithOption-x01:at32.1Gbit/s∗4: WithOption-x12orx22:atamplitude2.0Vp-p,

WithOption-x13orx23:atamplitude3.5Vp-p∗5: Typicalvalue∗6: Usingoscilloscopewithintrinsicjitteroflessthan200fs(RMS).∗7: WithMU183020A-x22orMU183020A-x23.Or,whenMU183021Aisused.∗8: WithOption-x30orx31.∗9: Thesevaluesaremonitoredusinganapplicablepart(J1439Acoaxialcable,0.8m,Kconnector)atasamplingoscilloscopebandwidthof70GHz.∗10: Thisvalueisthepeak-to-peakjitterofthecrossingpointonEyepatternmeasuredat1kJittertotalsamplesand30counts,andisnottheestimatedTJatBER

1E-12usingDR/RJdecomposition.

Page 43: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 43

JitterTolerance∗7

Bit-rate: 16Gbit/s,28.1Gbit/s∗1 16Gbit/s,28.1Gbit/s,32.1Gbit/s∗2

TestPattern:PRBS231 – 1

0.00001

2000

1510

1

Modulation Frequency [MHz]

Jitte

r Am

plitu

de [U

Ip-p

]

0.075 1 10

20dB/decade

250

Multi-ChannelOperation

MU183020ACombination∗1, ∗2:2ch(Bitshiftedtestpatternas56Gbit/s,64Gbit/sbandsignalsource)CHSync.:2to4ch∗3,∗6

Phasevariablerange∗5:–64000mUIto+64000mUI,Steps:2mUIMU183021A Combination∗2: 2ch(Bitshiftedtestpatternas56G/64Gbit/sbandsignalsource)

4ch(Bitshiftedtestpatternas112G/128Gbit/sbandsignalsource)CHSync.:2to8ch∗3, ∗4

Phasevariablerange∗5:–64000mUIto+64000mUI,Steps:2mUIOperatingTemperature 15°to35°C

∗1:Option-x31isrequiredfortargetchannels.∗2:Combinationextendingovermultipleslotscannotbeset.∗3:WhentargetchannelsareinstalledsuccessivelyfromSlot1.∗4:Option-x30isrequiredfortargetchannels.∗5:Aseparatevaluecanbesetforeachchannel.ThisvalueiscommontobothChannelCombinationandChannelSynchronization.∗6:Option-x30orx31isrequiredfortargetchannels.∗7:CombinedoperationwithMU181500BandMU181000A/B.SJapplied.LoopedbackwithMU183040A/B.

Page 44: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

44 Product Brochure l MP1800A

MU183040A 28G/32G bit/s ED, MU183041A 28G/32G bit/s 4ch ED MU183040B 28G/32G bit/s High Sensitivity ED, MU183041B 28G/32G bit/s 4ch High Sensitivity ED

Bit-rate OperationalBit-rateRange: 2.4Gbit/sto28.1Gbit/s 2.4Gbit/sto32.1Gbit/s(withOption-x01)

Data Input

NumberofInputMU183040A/B-010···2(Data,XData)MU183040A/B-020···4(Data1toData2,XData1toXData2)MU183041A/B···8(Data1toData4,XData1toXData4)

Amplifier:Single-ended50Ω,Differential50Ω,Differential100Ωcanbeset.Data, XData can be set.Tracking,Independent,Alternatecanbeset.(Data-XDataorXData-DatacanbesetwhenAlternateisselected.∗1)

Format:NRZMU183040A/MU183041A MU183040B/MU183041B

Input Amplitude∗8 0.25Vp-pto2.0Vp-p 0.05Vp-pto1.0Vp-p

Sensitivity∗8Eye Amplitude 50mVp-p∗2, ∗3, ∗4 15mVp-p∗2, ∗3, ∗4

≤25mVp-p∗4

EyeHeight – 10mVp-p∗2, ∗3, ∗4,∗9

Note:Becarefulaboutthemaximuminputamplitude.2Vp-pMax.forA-type,and1Vp-pMax.forB-type.

Thresholdvoltage:–3.5Vto+3.3V,1mVstep(CanbesetindividuallyforDataandXData.)AbsolutevalueofdifferencebetweenDataandXDataThresholdvaluesshallbe3Vorless.

PhaseMargin: 20ps∗2, ∗4,∗5,∗7 28 ps∗4,∗5,∗6,∗7

Termination:GND/50Ω,Variable/50ΩTerminationvoltage:–2.5Vto+3.5V,10mVstep(Whenterminationvariableisselected)Connector:K(f.)

ClockInput

NumberofInput:1(Single-end)Frequency:1.2GHzto16.05GHzAmplitude:0.3Vp-pto1.0Vp-p(–6.5to+4.0dBm)Termination:50Ω/ACCouplingConnector:SMA(f.)

ClockRecoveryClockRecoveryfromCH1Datainput,internaldistributiontoeachchannel∗10

ClockRecoverycanbeinstalledintoMU183040B/MU183041B.MU183040A/MU183041Adoesnotsupportclockrecoveryoption.

OperatingBit-rate 2.4Gbit/sto28.1Gbit/s,1kbit/sstep(Option-x22)25.5Gbit/sto32.1Gbit/s∗11,1kbit/sstep(Option-x23)

MaximumNumberofConsecutiveZeros∗12 72bit(ZeroSubstitution215)

LockRangeforClockDataRecovery∗12

±200ppm(Option-x22)±100ppm(Option-x23)

TargetLoopBand

AvailableoptionsareBitrate/1667,Bitrate/2578,JitterTolerance∗13andVariable(Option-x22)IftheVariableoptionisselected,thefollowingsettingsareavailable:

Bitrate[Gbit/s] SettingRange[MHz]/Step[MHz] 2.400000 to 5.500000 3/– 5.500001 to 7.500000 3to4/1 7.500001 to 9.500000 3to5/1 9.500001 to10.500000 3to6/1 10.500001 to12.500000 3to7/1 12.500001 to14.500000 3 to 8/1 14.500001 to15.500000 3to9/1 15.500001 to17.500000 3 to 10/1 17.500001 to19.500000 3 to 11/1 19.500001 to20.500000 3 to 12/1 20.500001 to22.500000 3 to 13/1 22.500001 to24.500000 3to14/1 24.500001 to25.500000 3to15/1 25.500001 to27.500000 3to16/1 27.500001 to28.100000 3to17/1

AvailableoptionsareBitrate/1667,Bitrate/2578andJitterTolerance∗13(Option-x23)

JitterTolerance Comply16GFC,32GFC,100GbE(25.78x4),InfiniBandFDR,JitterToleranceMask(Option-x22)Comply32GFC,100GbE(25.78x4),JitterToleranceMask(Option-x23)

Aux Input

NumberofInput:1(Single-end)InputSignal:ExternalMask,BurstMinimumPulseWidth:1/128ofBit-rateInputLevel:0/–1V(H:–0.25Vto0.05V,L:–1.1Vto–0.8V)Termination:GND/50ΩConnector:SMA(f.)

Page 45: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 45

AuxOutput

NumberofOutput:2(Differential)InputSignal:1/nClock(n=4,6,8,10···510,512),PatternSync,Error,Sync.gainPattern Sync.PRBS,PRGM:Position:(Leastcommonmultipleof1toPatternLengthand128)−135,8stepMixedData: BlockNo.setting:1totheBlockNo.specifiedforMixedData,insinglesteps

RowNo.setting:1totheRowNo.specifiedforMixedData,insinglestepsOutputLevel:0/–0.6V(H:–0.25Vto0.05V,L:–0.80Vto–0.45V)Termination:GND/50ΩConnector:SMA(f.)

Pattern Detection

PRBSPatternlength:2n–1(n=7,9,10,11,15,20,23,31)Markratio:1/2(1/2INVissupportedbyalogicinversion)

Zero-Substitution:Patternwithcontinuous0sappendedtoM-sequencesignal+1bitPattern:2n or 2n–1(n=7,9,10,11,15,20,23)0continuoussubstitutioncount:1to(patternlength–1)bits0atnextbitafter0substitutionchangedto1

DataDatalength:2bitsto268435456bits,1bitstep

Mixed PatternPattern:PRBS,Data–1toData–511MixedRowLength(Data+PRBSLength):1536to2415919104,256bitsstepDatalength:1024bitsto268435456bits,1bitstepPRBSlength/MarkRatio:SameasPRBSPRBSSequence:Restart,Consecutive

PatternSequence

Repeat:ContinuousPatternBurstBurstCycle:25600bitsto2147483648bits,256bitsstepEnable periodInternal:12800bitsto2147483392bits,256bitsstepExtTrigger,Enable:12800bitsto2147483648bits,256bitsstep

MeasurementType ErrorRate,ErrorCount,ErrorInterval,ErrorFreeInterval(%),FrequencyClockCount,SyncLossInterval,ClockLossInterval

Error Detection Mode Totalerror,InsertionError,OmissionError,TransitionError,NonTransitionErrorError Analysis EyeMargin,EyeDiagram,BathtubJitter,AutoAdjust,AutoSearch,CaptureBurstMeasurementSignal BurstTrigger:Internal,External

VariableClockDelayPhasevariablerange:–1000mUIto+1000mUI,2mUIstepPhasesettingerror:±50mUIp-p∗1, ∗4

mUI-psselectable

Multi-channelOperation MU183040A/B(withOption-x20):2chcombination(Combinationextendingovermultipleslotscannotbeset)MU183041A/B(4ch):2chor4chcombination(Combinationextendingovermultipleslotscannotbeset)

OperatingTemperature 15°to35°C

∗1:AbsolutevalueofdifferencebetweenDataandXDataThresholdvaluesshallbe1.5Vorless.∗2:28.1Gbit/s∗3:PRBS31,Single-ended,MarkRatio1/2,20°to30°C∗4:Typicalvalue∗5:0.5Vp-pInput∗6:25Gbit/s∗7:PRBS31,Single-ended,Markratio1/2∗8:InputamplitudeisarangewhereAutoAdjustfunctionoperates.Inputsensitivityistheminimuminputamplitudewhichbecomeserror-free.∗9:Sensitivityofeyeheight.EyeHeightistheinternalamplitudeofEyewhentheoutputamplitudeoftheMU183020A/21A+ATTissetto15mVwiththe

measurementsystemasthefigurebelow(Asamplingoscilloscopewiththebandwidthof70GHzormoreisused.). ThenumberofsampleswithSamplingOscilloscopeisequivalenttoBER1E–9orlessatthisinternalamplitude.

∗10:MU183041B-023recoversClockfromCH1DatainputanddistributestoCH1andCH2.AlsorecoversClockfromCH3DatainputanddistributestoCH3andCH4.∗11:MU183040B/41B-001mustbeinstalled.∗12:WhentheMU183040B/MU183041B-x22optionisinstalled:Thetargetloopbandisspecifiedbythemaximumsettingvalueofeachbitrate.

WhentheMU183040B/MU183041B-x23optionisinstalled:Thetargetloopbandisspecifiedby(Bitrate/1667)and(Bitrate/2578).∗13:TheJitterToleranceoptionmakestheloopbandwiderthantheotheroptionsandenablestheJitterTolerancemeasurement.

Page 46: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

46 Product Brochure l MP1800A

MZ1834A 4PAM Converter

DataOutput

NumberofOutputs:2(Data,xData)ModulationFormat:PAM4OutputAmplitude∗1:0.238Vp-pto0.475Vp-p(nom.)(withusingMU183020A-022orMU183021A-012)

0.238Vp-pto0.832Vp-p(nom.)(withusingMU183020A-023orMU183021A-013)Tr/Tf:12ps(typ.)(20to80%,withusingMU18302xA)Connector:K(f.)

Data InputNumberofInputs:4(Data1,xData1,Data2,xData2)InputAmplitude:0.5Vp-pto3.5Vp-pConnector:K(m.)

InsertionLoss –16dB(nom.)∗2

GeneralTemperature:+15°to+35°C(Operating),–20°to+60°C(Storage)Mass:2kgmax.Dimensions:92.2(W)×20.4(H)×121.7(D)mm∗3

∗1:0to3Level∗2:Data_ninputtoDataoutput∗3:Excludingprotrusions

MZ1838A 8PAM Converter

DataOutput

NumberofOutputs:2(Data,xData)ModulationFormat:PAM8OutputAmplitude∗2:0.139Vp-pto0.441Vp-p(nom.)(withusingMU183021A-012)

0.139Vp-pto0.772Vp-p(nom.)(withusingMU183021A-013)Tr/Tf:12ps(typ.)(20to80%,withusingMU18302xA)Connector:K(f.)

Data InputNumberofInputs:6(Data1,xData1,Data2,xData2,Data3,xData3)InputAmplitude:0.5Vp-pto3.5Vp-pConnector:K(m.)

InsertionLoss Data1:–16dB,Data2:–24dB,Data3:–28dB(nom.)∗2

GeneralTemperature:+15°to+35°C(Operating),–20°to+60°C(Storage)Mass:3kgmax.Dimensions:96.8(W)×40(H)×181.2(D)mm∗3

∗1:0to7Level∗2:Data_ninputtoDataoutput∗3:Excludingprotrusions

J1621A Passive Equalizer 3 dB, J1622A Passive Equalizer 6 dBFrequencyRange DCto14.0GHz(25Gbit/sto28Gbit/s)

Slope 3.0±0.5dB(J1621A)6.0±0.5dB(J1622A)

InsertionLossAt14GHz≤1.2dB(J1621A)≤1.4dB(J1622A)

ReturnLoss 12dB(min.)

GeneralConnectors:SMAImpedance:50Ω(nom.)Dimension:44(W)×12(H)×11(D)mm

Page 47: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 47

Ordering InformationPleasespecifythemodel/ordernumber,nameandquantitywhenordering.ThenameslistedinthechartbelowareOrderNames.TheactualnameoftheitemmaydifferfromtheOrderName.

MP1800AModel/OrderNo. Name

Main FrameMP1800A Signal Quality Analyzer

Standard Accessories J0491 ShieldPowerCord(13A): 1pcZ0306A WristStrap: 1pcZ0541A USBMouse: 1pcB0329G FrontCoverfor3/4MW4U: 1pcB0574A MP1800AProtectCover: 1pcMX180000A SignalQualityAnalyzerControlSoftware: 1pcZ0897A MP1800AManualCD: 1pc

OptionsMP1800A-001 GPIBMP1800A-002 LANMP1800A-007 OSUpgradetoWindows7MP1800A-014 2-SlotforPPGand/orEDMP1800A-015 4-SlotforPPGand/orEDMP1800A-016 6-SlotforPPGand/orEDMP1800A-032 32 Gbit/s PPG and/or ED Support

Retrofit OptionsMP1800A-101 GPIBRetrofitMP1800A-102 LANRetrofitMP1800A-107 OSUpgradetoWindows7RetrofitMP1800A-132 32Gbit/sPPGand/orEDSupportRetrofit

Calibration ServiceMP1800A-190 25GCalibrationofPPGandMUXRetrofit

Maintenance ServiceMP1800A-ES310 ThreeYearsExtendedWarrantyServiceMP1800A-ES510 FiveYearsExtendedWarrantyService

MT1810AModel/OrderNo. Name

Main FrameMT1810A 4SlotChassis

Standard AccessoriesJ0491 ShieldPowerCord(13A): 1pcZ0306A WristStrap: 1pcJ1109B LANCable(CAT5,Cross),5m: 1pcB0575A MT1810AProtectCover: 1pcMX180000A SignalQualityAnalyzerControlSoftware: 1pcZ0897A MP1800AManualCD: 1pc

OptionsMT1810A-014 2-SlotforPPGand/orEDMT1810A-015 4-SlotforPPGand/orEDMT1810A-032 32 Gbit/s PPG and/or ED Support

Retrofit OptionsMT1810A-132 32Gbit/sPPGand/orEDSupportRetrofit

Calibration ServiceMT1810A-190 25GPPG/MUXCalibrationRetrofit

Maintenance ServiceMT1810A-ES310 ThreeYearsExtendedWarrantyServiceMT1810A-ES510 FiveYearsExtendedWarrantyService

MU181000AModel/OrderNo. Name

Unit/ModuleMU181000A 12.5GHzSynthesizer

Standard AccessoriesJ1349A CoaxialCable0.3m(SMA,DCto18GHz): 1pc

OptionsMU181000A-001 JitterModulation

Retrofit OptionsMU181000A-101 JitterModulationRetrofit

Maintenance ServiceMU181000A-ES310 ThreeYearsExtendedWarrantyServiceMU181000A-ES510 FiveYearsExtendedWarrantyService

MU181000BModel/OrderNo. Name

Unit/ModuleMU181000B 12.5GHz4portSynthesizer

Standard AccessoriesJ1349A CoaxialCable0.3m(SMA,DCto18GHz): 4pcs

OptionMU181000B-001 JitterModulation

Retrofit OptionMU181000B-101 JitterModulationRetrofit

Maintenance ServiceMU181000B-ES310 ThreeYearsExtendedWarrantyServiceMU181000B-ES510 FiveYearsExtendedWarrantyService

MU181500BModel/OrderNo. Name

Unit/ModuleMU181500B JitterModulationSource

Standard AccessoriesJ1349A CoaxialCable0.3m(SMA,DCto18GHz): 1pcJ1508A BNC-SMAConnectorCable(30cm): 2pcsJ1137 Terminator: 6pcsJ1341A Open: 2pcsZ0897A MP1800AManualCD: 1pcZ0918A MX180000ASoftwareCD: 1pc

Maintenance ServiceMU181500B-ES310 ThreeYearsExtendedWarrantyServiceMU181500B-ES510 FiveYearsExtendedWarrantyService

MU181800AModel/OrderNo. Name

Unit/ModuleMU181800A 12.5GHzClockDistributor

Maintenance ServiceMU181800A-ES310 ThreeYearsExtendedWarrantyServiceMU181800A-ES510 FiveYearsExtendedWarrantyService

MU181800BModel/OrderNo. Name

Unit/ModuleMU181800B 14GHzClockDistributor

OptionMU181800B-005 14.1GHzExtension

Retrofit OptionMU181800B-105 14.1GHzExtensionRetrofit

Maintenance ServiceMU181800B-ES310 ThreeYearsExtendedWarrantyServiceMU181800B-ES510 FiveYearsExtendedWarrantyService

Page 48: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

48 Product Brochure l MP1800A

MU181020AModel/OrderNo. Name

Unit/ModuleMU181020A 12.5Gbit/sPPG

Standard AccessoriesJ1137 Terminator(50Ω): 3pcsJ1341A Open: 1pc

OptionsMU181020A-001 9.8to12.5Gbit/sMU181020A-002 0.1to12.5Gbit/sMU181020A-010 VariableDataOutput(0.05to0.8Vp-p)MU181020A-011 VariableDataOutput(0.25to2.5Vp-p)MU181020A-012 HighPerformanceDataOutput(0.05to2.0Vp-p)MU181020A-013 VariableDataOutput(0.5to3.5Vp-p)MU181020A-021 DifferentialClockOutput(0.1to2.0Vp-p)MU181020A-030 VariableDataDelay

Retrofit OptionsMU181020A-110 VariableDataOutput(0.05to0.8Vp-p)RetrofitMU181020A-111 VariableDataOutput(0.25to2.5Vp-p)RetrofitMU181020A-112 HighPerformanceDataOutput(0.05to2.0Vp-p)RetrofitMU181020A-113 VariableDataOutput(0.5to3.5Vp-p)RetrofitMU181020A-121 DifferentialClockOutput(0.1to2.0Vp-p)RetrofitMU181020A-130 VariableDataDelayRetrofit

Standard Accessories for MU181020A-011/111J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

Standard Accessories for MU181020A-012/112J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

Standard Accessories for MU181020A-013/113J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

Standard Accessories for MU181020A-021/121J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcsJ1137 Terminator(50Ω): 1pc

Maintenance ServiceMU181020A-ES310 ThreeYearsExtendedWarrantyServiceMU181020A-ES510 FiveYearsExtendedWarrantyService

MU181020BModel/OrderNo. Name

Unit/ModuleMU181020B 14Gbit/sPPG

Standard AccessoriesJ1137 Terminator(50Ω): 3pcsJ1341A Open: 1pc

OptionsMU181020B-002 0.1to14Gbit/sMU181020B-005 14.1Gbit/sExtensionMU181020B-011 VariableDataOutput(0.25to2.5Vp-p)MU181020B-012 HighPerformanceDataOutput(0.05to2.0Vp-p)MU181020B-013 VariableDataOutput(0.5to3.5Vp-p)MU181020B-021 DifferentialClockOutput(0.1to2.0Vp-p)MU181020B-030 VariableDataDelay

Retrofit OptionsMU181020B-105 14.1Gbit/sExtensionRetrofitMU181020B-111 VariableDataOutput(0.25to2.5Vp-p)RetrofitMU181020B-112 HighPerformanceDataOutput(0.05to2.0Vp-p)RetrofitMU181020B-113 VariableDataOutput(0.5to3.5Vp-p)RetrofitMU181020B-121 DifferentialClockOutput(0.1to2.0Vp-p)RetrofitMU181020B-130 VariableDataDelayRetrofit

Standard Accessories for MU181020B-011/111J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

Standard Accessories for MU181020B-012/112J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

Standard Accessories for MU181020B-013/113J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

Standard Accessories for MU181020B-021/121J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcsJ1137 Terminator(50Ω): 1pc

Maintenance ServiceMU181020B-ES310 ThreeYearsExtendedWarrantyServiceMU181020B-ES510 FiveYearsExtendedWarrantyService

MU181040AModel/OrderNo. Name

Unit/ModuleMU181040A 12.5Gbit/sED

OptionsMU181040A-001 9.8to12.5Gbit/sMU181040A-002 0.1to12.5Gbit/sMU181040A-020 ClockRecoveryMU181040A-030 VariableClockDelay

Retrofit OptionsMU181040A-120 ClockRecoveryRetrofitMU181040A-130 VariableClockDelayRetrofit

Standard Accessories for MU181040A-001J1341A Open: 2pcs

Standard Accessories for MU181040A-002J1341A Open: 3pcsJ1359A CoaxialAdapter(K-P,K-J,SMA): 2pcsJ1137 Terminator(50Ω): 2pcs

Standard Accessories for MU181040A-020/120J1137 Terminator(50Ω): 1pc

Maintenance ServiceMU181040A-ES310 ThreeYearsExtendedWarrantyServiceMU181040A-ES510 FiveYearsExtendedWarrantyService

MU181040BModel/OrderNo. Name

Unit/ModuleMU181040B 14Gbit/sED

OptionsMU181040B-002 0.1to14Gbit/sMU181040B-005 14.1Gbit/sExtensionMU181040B-020 ClockRecoveryMU181040B-030 VariableClockDelay

Retrofit OptionsMU181040B-105 14.1Gbit/sExtensionRetrofitMU181040B-120 ClockRecoveryRetrofitMU181040B-130 VariableClockDelayRetrofit

Standard Accessories for MU181040B-002J1341A Open: 3pcsJ1359A CoaxialAdapter(K-P,K-J,SMA): 2pcsJ1137 Terminator(50Ω): 2pcs

Standard Accessories for MU181040B-020/120J1137 Terminator(50Ω): 1pc

Maintenance ServiceMU181040B-ES310 ThreeYearsExtendedWarrantyServiceMU181040B-ES510 FiveYearsExtendedWarrantyService

Page 49: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 49

MU182020AModel/OrderNo. Name

Unit/ModuleMU182020A 25Gbit/s1chMUX

Standard AccessoriesJ1137 Terminator(50Ω): 5pcsJ1341A Open: 4pcsJ1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

MU182020ASemi-RigidCableSet(MUX-PPG): 1pcOptions

MU182020A-001 28 Gbit/s ExtensionMU182020A-002 ClockInputBandSwitchMU182020A-003 28.1 Gbit/s ExtensionMU182020A-010 VariableDataOutput(0.25to1.75Vp-p)MU182020A-011 VariableDataOutput(0.5to2.5Vp-p)MU182020A-013 VariableDataOutput(0.5to3.5Vp-p)MU182020A-021 VariableClockOutput(0.5to2.0Vp-p)MU182020A-030 25Gbit/sVariableDataDelayMU182020A-031 28Gbit/sVariableDataDelay

Retrofit OptionsMU182020A-101 28Gbit/sExtensionRetrofitMU182020A-102 ClockInputBandSwitchRetrofitMU182020A-110 VariableDataOutput(0.25to1.75Vp-p)RetrofitMU182020A-111 VariableDataOutput(0.5to2.5Vp-p)RetrofitMU182020A-113 VariableDataOutput(0.5to3.5Vp-p)RetrofitMU182020A-121 VariableClockOutput(0.5to2.0Vp-p)RetrofitMU182020A-130 25Gbit/sVariableDataDelayRetrofitMU182020A-131 28Gbit/sVariableDataDelayRetrofit

Standard Accessories for MU182020A-002/102J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

Standard Accessories for MU182020A-020/120J1359A CoaxialAdapter(K-P,K-J,SMA): 1pc

Maintenance ServiceMU182020A-ES310 ThreeYearsExtendedWarrantyServiceMU182020A-ES510 FiveYearsExtendedWarrantyService

MU182040AModel/OrderNo. Name

Unit/ModuleMU182040A 25Gbit/s1chDEMUX

Standard AccessoriesJ1137 Terminator(50Ω): 4pcsJ1341A Open: 3pcsJ1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

MU182040ASemi-RigidCableSet(DEMUX-ED): 1pcOptions

MU182040A-001 28 Gbit/s ExtensionMU182040A-002 ClockInputBandSwitchMU182040A-003 28.1 Gbit/s ExtensionMU182040A-030 25GHzVariableClockDelayMU182040A-031 28GHzVariableClockDelay

Retrofit OptionsMU182040A-101 28Gbit/sExtensionRetrofitMU182040A-102 ClockInputBandSwitchRetrofitMU182040A-130 25GHzVariableClockDelayRetrofitMU182040A-131 28GHzVariableClockDelayRetrofit

Standard Accessories for MU182040A-002/102J1359A CoaxialAdapter(K-P,K-J,SMA): 1pc

Maintenance ServiceMU182040A-ES310 ThreeYearsExtendedWarrantyServiceMU182040A-ES510 FiveYearsExtendedWarrantyService

MU182021AModel/OrderNo. Name

Unit/ModuleMU182021A 25Gbit/s2chMUX

Standard AccessoriesJ1137 Terminator(50Ω): 9pcsJ1341A Open: 6pcsJ1359A CoaxialAdapter(K-P,K-J,SMA): 4pcs

MU182021ASemi-RigidCableSet(MUX-PPG): 1pcOptions

MU182021A-001 28 Gbit/s ExtensionMU182021A-002 ClockInputBandSwitchMU182021A-003 28.1 Gbit/s ExtensionMU182021A-010 VariableDataOutput(0.25to1.75Vp-p)MU182021A-011 VariableDataOutput(0.5to2.5Vp-p)MU182021A-013 VariableDataOutput(0.5to3.5Vp-p)MU182021A-021 DifferentialClockOutput(0.5to2.0Vp-p)MU182021A-030 25Gbit/sVariableDataDelayMU182021A-031 28Gbit/sVariableDataDelayMU182021A-040 EmphasisControl

Retrofit OptionsMU182021A-101 28Gbit/sExtensionRetrofitMU182021A-102 ClockInputBandSwitchRetrofitMU182021A-110 VariableDataOutput(0.25to1.75Vp-p)RetrofitMU182021A-111 VariableDataOutput(0.5to2.5Vp-p)RetrofitMU182021A-113 VariableDataOutput(0.5to3.5Vp-p)RetrofitMU182021A-121 DifferentialClockOutput(0.5to2.0Vp-p)RetrofitMU182021A-130 25Gbit/sVariableDataDelayRetrofitMU182021A-131 28Gbit/sVariableDataDelayRetrofitMU182021A-140 EmphasisControlRetrofit

Standard Accessories for MU182021A-002/102J1359A CoaxialAdapter(K-P,K-J,SMA): 2pcs

Standard Accessories for MU182021A-021/121J1359A CoaxialAdapter(K-P,K-J,SMA): 1pc

Maintenance ServiceMU182021A-ES310 ThreeYearsExtendedWarrantyServiceMU182021A-ES510 FiveYearsExtendedWarrantyService

MU182041AModel/OrderNo. Name

Unit/ModuleMU182041A 25Gbit/s2chDEMUX

Standard AccessoriesJ1137 Terminator(50Ω): 8pcsJ1341A Open: 5pcsJ1359A CoaxialAdapter(K-P,K-J,SMA): 4pcs

MU182041ASemi-RigidCableSet(DEMUX-ED): 1pcOptions

MU182041A-001 28 Gbit/s ExtensionMU182041A-002 ClockInputBandSwitchMU182041A-003 28.1 Gbit/s ExtensionMU182041A-030 25GHzVariableClockDelayMU182041A-031 28GHzVariableClockDelay

Retrofit OptionsMU182041A-101 28Gbit/sExtensionRetrofitMU182041A-102 ClockInputBandSwitchRetrofitMU182041A-130 25GHzVariableClockDelayRetrofitMU182041A-131 28GHzVariableClockDelayRetrofit

Standard Accessories for MU182041A-002/102J1359A CoaxialAdapter(K-P,K-J,SMA) 1pc

Maintenance ServiceMU182041A-ES310 ThreeYearsExtendedWarrantyServiceMU182041A-ES510 FiveYearsExtendedWarrantyService

Page 50: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

50 Product Brochure l MP1800A

MU183020AModel/OrderNo. Name

Unit/ModuleMU183020A 28G/32G bit/s PPG

Standard AccessoriesJ1137 Terminator: 3pcsJ1359A CoaxialAdaptor(K-P,K-J,SMA): 1pcJ1341A Open: 1pcJ0541E 6dBFixedAttenuator: 1pcZ0897A MP1800AManualCD: 1pcZ0918A MX180000ASoftwareCD: 1pc

OptionsMU183020A-001 32G bit/s ExtensionMU183020A-012 1ch2VDataOutputMU183020A-013 1ch3.5VDataOutputMU183020A-022 2ch2VDataOutputMU183020A-023 2ch3.5VDataOutputMU183020A-030 1ch Data DelayMU183020A-031 2ch Data Delay

Retrofit OptionsMU183020A-101 32Gbit/sExtensionRetrofitMU183020A-112 1ch2VDataOutputRetrofitMU183020A-113 1ch3.5VDataOutputRetrofitMU183020A-122 2ch2VDataOutputRetrofitMU183020A-123 2ch3.5VDataOutputRetrofitMU183020A-130 1chDataDelayRetrofitMU183020A-131 2chDataDelayRetrofit

Standard Accessories for MU183020A-x12, x13J1137 Terminator: 2pcsJ1359A CoaxialAdaptor(K-P,K-J,SMA): 2pcs

Standard Accessories for MU183020A-x22, x23J1137 Terminator: 4pcsJ1359A CoaxialAdaptor(K-P,K-J,SMA): 4pcs

Maintenance ServiceMU183020A-ES310 ThreeYearsExtendedWarrantyServiceMU183020A-ES510 FiveYearsExtendedWarrantyService

MU183040BModel/OrderNo. Name

Unit/ModuleMU183040B 28G/32Gbit/sHighSensitivityED

Standard AccessoriesJ1137 Terminator: 2pcsJ1341A Open: 1pcZ0897A MP1800AManualCD: 1pcZ0918A MX180000ASoftwareCD: 1pc

OptionsMU183040B-001 32 Gbit/s ExtensionMU183040B-010 1ch ED MU183040B-020 2ch ED MU183040B-022 2.4Gto28.1Gbit/sClockRecoveryMU183040B-023 25.5Gto32.1Gbit/sClockRecovery

Retrofit OptionsMU183040B-101 32Gbit/sExtensionRetrofitMU183040B-110 1chEDRetrofitMU183040B-120 2chEDRetrofitMU183040B-122 2.4Gto28.1Gbit/sClockRecoverRetrofitMU183040B-123 25.5Gto32.1Gbit/sClockRecoveryRetrofit

Standard Accessories for MU183040B-x10J1341A Open: 2pcsJ1359A CoaxialAdaptor(K-P,K-J,SMA): 2pcs41KC-6 PrecisionFixedAttenuator6dB: 2pcs

Standard Accessories for MU183040B-x20J1341A Open: 4pcsJ1359A CoaxialAdaptor(K-P,K-J,SMA): 4pcs41KC-6 PrecisionFixedAttenuator6dB: 4pcs

Maintenance ServiceMU183040B-ES310 ThreeYearsExtendedWarrantyServiceMU183040B-ES510 FiveYearsExtendedWarrantyService

MU183021AModel/OrderNo. Name

Unit/ModuleMU183021A 28G/32Gbit/s4chPPG

Standard AccessoriesJ1137 Terminator: 3pcsJ1359A Coaxial Adaptor(K-P,K-J,SMA): 1pcJ1341A Open: 1pcJ0541E 6dBFixedAttenuator: 1pcZ0897A MP1800AManualCD: 1pcZ0918A MX180000ASoftwareCD: 1pc

OptionsMU183021A-001 32G bit/s ExtensionMU183021A-012 4ch2.0VDataOutputMU183021A-013 4ch3.5VDataOutputMU183021A-030 4chDataDelay

Retrofit OptionsMU183021A-101 32Gbit/sExtensionRetrofitMU183021A-112 4ch2.0VDataOutputRetrofitMU183021A-113 4ch3.5VDataOutputRetrofitMU183021A-130 4chDataDelayRetrofit

Standard Accessories for MU183021A-x12, x13J1137 Terminator: 8pcsJ1359A Coaxial Adaptor(K-P,K-J,SMA): 8pcs

Maintenance ServiceMU183021A-ES310 ThreeYearsExtendedWarrantyServiceMU183021A-ES510 FiveYearsExtendedWarrantyService

MU183041BModel/OrderNo. Name

Unit/ModuleMU183041B 28G/32Gbit/s4chHighSensitivityED

Standard AccessoriesJ1137 Terminator: 3pcsJ1341A Open: 9pcsJ1359A Coaxial Adaptor(K-P,K-J,SMA): 8pcs41KC-6 PrecisionFixedAttenuator6dB: 8pcsZ0897A MP1800AManualCD: 1pcZ0918A MX180000ASoftwareCD: 1pc

OptionsMU183041B-001 32 Gbit/s ExtensionMU183041B-022 2.4Gto28.1Gbit/sClockRecoveryMU183041B-023 25.5Gto32.1Gbit/sClockRecovery

Retrofit OptionsMU183041B-101 32Gbit/sExtensionRetrofitMU183041B-122 2.4Gto28.1Gbit/sClockRecoveryRetrofitMU183041B-123 25.5Gto32.1Gbit/sClockRecoveryRetrofit

Maintenance ServiceMU183041B-ES310 ThreeYearsExtendedWarrantyServiceMU183041B-ES510 FiveYearsExtendedWarrantyService

Page 51: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

Product Brochure l MP1800A 51

MZ1834AModel/OrderNo. Name

Main FrameMZ1834A 4PAMConverter

Standard AccessoriesJ1359A Coaxial Adaptor(K-P,K-J,SMA): 2pcsZ0897A MP1800AManualCD: 1pc

MZ1838AModel/OrderNo. Name

Main FrameMZ1838A 8PAMConverter

Standard AccessoriesJ1359A Coaxial Adaptor(K-P,K-J,SMA): 2pcsZ0897A MP1800AManualCD: 1pc

SoftwareModel/OrderNo. Name

MX180000A SignalQualityAnalyzerControlSoftwareMX180000A-001 Pre-CodeMX180000A-002 De-CodeMX180001A SDH/SONETPatternEditorMX180003A GbE/10 GbE Pattern EditorMX180004A PONApplicationSoftwareMX180005A JitterApplicationSoftwareMX181500A Jitter/NoiseToleranceTestSoftware

Optional AccessoriesModel/OrderNo. NameJ1621A PassiveEqualizer3dBJ1622A PassiveEqualizer6dBJ0008 GPIBCable2mJ1137 Terminator(50Ω)J1341A OpenJ1342A CoaxialCable0.8m(APC-3.5,DCto27.5GHz)J1343A CoaxialCable1.0m(SMA,DCto18GHz)J1349A CoaxialCable0.3m(SMA,DCto18GHz)J1439A CoaxialCable0.8m(Kconnector,DCto40GHz)

J1550ACoaxialSkewMatchCable(0.8m,APC3.5,DCto27.5GHz,Skew<3ps,paircable)

J1551ACoaxialSkewMatchCable(0.8m,Kconnector,DCto40GHz,Skew<3ps,paircable)

J1611A CoaxialCable(1.3m,Kconnector,DCto40GHz)

J1612AElectricalLengthSpecifiedCoaxialCable(0.8m,KConnector,DCto40GHz,IndividualDelayDifference:3psorless,1pc)

J1615ACoaxialCableSet(PPG-Emphasis,forjittertolerancemeasurement,2pcs)

J1618ACoaxialCableSet(Jitter-2chPPG-2chEmphasis,forjittertolerancemeasurement,6pcs)

J1359A CoaxialAdapter(K-P,K-J,SMA)J1360A MeasurementKit<J1342A×2,J1343A×1>

J1449A MeasurementKit(Kconnector)<J1439A×2,J1342A×2,J1343A×1>

Z0897A MP1800AManualCDZ0917A ShieldedLANCable,5m(CAT5,Straight)Z0918A MX180000ASoftwareCDZ0922A EnglishUSBKeyboard(104key)B0588A RackMountKit(MP1800A)B0587A RackMountKit(MT1810A)B0576A BlankPanelB0566A MP1800AHardCarryingCase(MP1800A)B0591A MT1810AHardCarryingCase(MT1810A)W2745AE MP1800AOperationManualW2747AE MP1800A Installation GuideW2746AE MT1810AOperationManualW2748AE MT1810AInstallationGuideW2750AE MU181000A/BOperationManualW2752AE MU181020A/BOperationManualW2753AE MU181040A/BOperationManualW3481AE MU181500BOperationManualW2751AE MU181800A/BOperationManualW3128AE MU182020A/MU182021AOperationManualW3129AE MU182040A/MU182041AOperationManualW3594AE MU183020A/MU183021AOperationManualW2749AE MX180000AOperationManualW2799AE MX180000ARemoteControlOperationManualW2884AE MX180001AOperationManualW2886AE MX180003AOperationManualW2887AE MX180004AOperationManualW2926AE MX180005AOperationManualW3480AE MX181500AOperationManual41KC-3 PrecisionFixedAttenuator3dB41KC-6 PrecisionFixedAttenuator6dB41KC-10 PrecisionFixedAttenuator10dB41KC-20 PrecisionFixedAttenuator20dBK240C PrecisionPowerDividerK241C PrecisionPowerSplitterJ1620A CoaxialCable(0.9m,Kconnector)Z0306A WristStrap

Page 52: Signal Quality Analyzer - ATECorp.com...The PPG module supports low-jitter and high-quality waveforms. The output amplitude can be customized to application needs. Low-jitter: RJ 300

• United StatesAnritsu Company1155 East Collins Blvd., Suite 100, Richardson, TX 75081, U.S.A.Toll Free: 1-800-267-4878Phone: +1-972-644-1777Fax: +1-972-671-1877

• CanadaAnritsu Electronics Ltd.700 Silver Seven Road, Suite 120, Kanata, Ontario K2V 1C3, CanadaPhone: +1-613-591-2003 Fax: +1-613-591-1006

• Brazil Anritsu Eletrônica Ltda.Praça Amadeu Amaral, 27 - 1 Andar01327-010 - Bela Vista - São Paulo - SP - BrazilPhone: +55-11-3283-2511Fax: +55-11-3288-6940

• MexicoAnritsu Company, S.A. de C.V.Av. Ejército Nacional No. 579 Piso 9, Col. Granada11520 México, D.F., MéxicoPhone: +52-55-1101-2370Fax: +52-55-5254-3147

• United KingdomAnritsu EMEA Ltd.200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.Phone: +44-1582-433200 Fax: +44-1582-731303

• FranceAnritsu S.A.12 avenue du Québec, Bâtiment Iris 1- Silic 612,91140 VILLEBON SUR YVETTE, FrancePhone: +33-1-60-92-15-50Fax: +33-1-64-46-10-65

• GermanyAnritsu GmbHNemetschek Haus, Konrad-Zuse-Platz 1 81829 München, Germany Phone: +49-89-442308-0 Fax: +49-89-442308-55

• ItalyAnritsu S.r.l.Via Elio Vittorini 129, 00144 Roma, ItalyPhone: +39-6-509-9711 Fax: +39-6-502-2425

• SwedenAnritsu ABKistagången 20B, 164 40 KISTA, SwedenPhone: +46-8-534-707-00 Fax: +46-8-534-707-30

• FinlandAnritsu ABTeknobulevardi 3-5, FI-01530 VANTAA, FinlandPhone: +358-20-741-8100Fax: +358-20-741-8111

• DenmarkAnritsu A/SKay Fiskers Plads 9, 2300 Copenhagen S, DenmarkPhone: +45-7211-2200Fax: +45-7211-2210

• RussiaAnritsu EMEA Ltd. Representation Office in RussiaTverskaya str. 16/2, bld. 1, 7th floor.Russia, 125009, MoscowPhone: +7-495-363-1694Fax: +7-495-935-8962

• United Arab EmiratesAnritsu EMEA Ltd.Dubai Liaison OfficeP O Box 500413 - Dubai Internet CityAl Thuraya Building, Tower 1, Suit 701, 7th FloorDubai, United Arab EmiratesPhone: +971-4-3670352Fax: +971-4-3688460

• IndiaAnritsu India Private Limited2nd & 3rd Floor, #837/1, Binnamangla 1st Stage, Indiranagar, 100ft Road, Bangalore - 560038, IndiaPhone: +91-80-4058-1300Fax: +91-80-4058-1301

• SingaporeAnritsu Pte. Ltd.11 Chang Charn Road, #04-01, Shriro HouseSingapore 159640Phone: +65-6282-2400Fax: +65-6282-2533

• P.R. China (Shanghai)Anritsu (China) Co., Ltd.Room 2701-2705, Tower A, New Caohejing International Business CenterNo. 391 Gui Ping Road Shanghai, 200233, P.R. ChinaPhone: +86-21-6237-0898Fax: +86-21-6237-0899

• P.R. China (Hong Kong)Anritsu Company Ltd.Unit 1006-7, 10/F., Greenfield Tower, Concordia Plaza,No. 1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong, P.R. ChinaPhone: +852-2301-4980Fax: +852-2301-3545

• JapanAnritsu Corporation8-5, Tamura-cho, Atsugi-shi, Kanagawa, 243-0016 JapanPhone: +81-46-296-1221Fax: +81-46-296-1238

• KoreaAnritsu Corporation, Ltd.5FL, 235 Pangyoyeok-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 KoreaPhone: +82-31-696-7750Fax: +82-31-696-7751

• AustraliaAnritsu Pty. Ltd.Unit 21/270 Ferntree Gully Road, Notting Hill, Victoria 3168, AustraliaPhone: +61-3-9558-8177Fax: +61-3-9558-8255

• TaiwanAnritsu Company Inc.7F, No. 316, Sec. 1, NeiHu Rd., Taipei 114, TaiwanPhone: +886-2-8751-1816Fax: +886-2-8751-1817

Specifications are subject to change without notice.

1404

Printed on Recycled Paper

Please Contact:

CatalogNo.MP1800A-E-A-1-(19.00)PrintedinJapan12/DEC/2014ddcm/CDT