signages ppt

PRESENTATION ON

Signages

Presented By:MAHAMAD NISARA AHAMAD

DMIA

Introduction

Signs are any kind of visual graphics created to display information to a particular audience. This is typically manifested in the form of way finding information.

The main purpose of signs is to communicate, to convey information such that the receiver may make cognitive decisions based on the information provided. In general, signs may be classified according to the following functions:

• Information: signs conveying information about services and facilities, such as maps, directories, or instructional signs.

• Direction: signs showing the location of services, facilities, functional spaces and key areas, such as sign posts or directional arrows.

• Identification: signs indicating services and facilities, such as room names and numbers, restroom signs, or floor designations.

• Safety and Regulatory: signs giving warning or safety instructions, such as warning signs, traffic signs, exit signs, or signs conveying rules and regulations.

https://en.wikipedia.org/wiki/Graphics

https://en.wikipedia.org/wiki/Wayfinding

https://en.wikipedia.org/wiki/Regulatory_sign

https://en.wikipedia.org/wiki/Warning_sign

https://en.wikipedia.org/wiki/Traffic_sign_design

https://en.wikipedia.org/wiki/Exit_sign

Signage Categories WALL MOUNTED : Backlit Dynamic Information Signage SystemCEILING MOUNTED: Backlit Primary SignagePOST MOUNTED : Backlit Secondary SignageGANTRY : Integrated Signage (In glass partitions and above elevator doors)SUPER GRAPHICS : Door Signs, Staff Signs, VIP Signage, Outdoor Signage, Traffic Wayfinding for Parking Area, Traffic Wayfinding for Access Roads, Staff Wayfinding for Access Roads, Dynamic Advertisement Signage, IPTV Cable Television and Graphics

Types of Signages

All signs shall be uniform in appearance. For an overview of the signage types, please see sign code for the schedule of all sign types and their appropriate drawing number in both Interim and Detail Design.

Dynamic Information Signage System : Thirteen different types. The Dynamic Signs can be either ceiling or wall mounted unless

otherwise noted.

• M1 - Backlit Illuminated Dynamic Sign

• M2 - Backlit Illuminated Dynamic Sign

• M3 - Backlit Dynamic Information Pylon

• M4 - Backlit Dynamic Sign





• M9 - Backlit Dynamic Sign:

• MA – Backlit Dynamic sign: To be integrated in the wall

• MB - Backlit Dynamic Sign

• MC - Backlit Dynamic Sign: To be canopy mounted

• MT – Backlit interactive Sign: Integrated into Information Counter

Primary Signage. Direction and information signs.: Nine (9)different types. The Primary Signs can be either ceiling or wall

mounted unless otherwise noted. Wall mounted versions are mostly integrated into glass partitions or walls above e.g.. elevator doors.

• P1 - Backlit Primary Sign.

• P2 - Backlit Primary Sign




• P6 - Backlit Primary Sign.


• P8 - Backlit Primary Sign: In the bus shelters a version with a dynamic LED sign instead of pictogram shall be used.

• P9 - Backlit Primary Signs. To be wall (blade) mounted.

Secondary Signage. Direction and Information signs.: Nine (9)different types. The Secondary Signs can be either ceiling or wall

mounted unless other wise noted. Wall mounted versions are mostly integrated into glass partitions or walls above e.g.. elevator doors.

• S1 - Backlit Secondary Sign

• S2 - Backlit Secondary Signs








Integrated Signage in glass partitions: Above elevator doors and official counters.

• G1 –Integrated sign for use in glass partitions, either single or double sided.

• G2 –As G1, only for integration above elevator doors and counters. Single sided only

Door signs.: Both for use as secondary and statutory signage, non-illuminated based on a modular system and wall mounted.

• D1 – Door sign for large pictogram

• D2 – Door sign for wayfinding use.

• D3 – Door sign for location use

• D4 – Door sign for location use

• D5 – Door sign for small pictogram

• D6 – Door sign for room use,

• D7 – Door sign for room use

• D8 - Door Sign is backlit and to be wall or blade mounted

Staff signs..: For use mainly in non-passenger areas, but can also be used on staff only doors in passenger areas. Signs are non-lluminated

based on a modular system and wall mounted.

• W1 - Staff Signs

• W2 - Staff Signs

• W3 - Door sign for location use

• W4 - Door sign for small pictogram.

• W5 – Door sign for room use, 1 line.

• W6 – Office Building directory

VIP Signage: Elegant signage for VIP Areas, made of polished and brushed stainless steel, using single elements (letters, symbols,

pictograms) and signage panels with patterns engraved.

Outdoor signage: Four different types. Information pylons for outdoor passenger use.

• E1 - Backlit Outdoor Pylons, to be mounted on a base column made of stainless steel.

• E2 - Backlit Outdoor Signs, to be ceiling or floor mounted.

• E3 - Backlit Dynamic Outdoor Sign, to be wall mounted or integrated into the entrance above the doors.

• E4 - Backlit Outdoor Sign, to be wall mounted or integrated into the entrance above the doors

Traffic Wayfinding signage for the Parking area: Nine different types. Illuminated Information pylons, hanging signs, ‘Bus stop’

type signs as well as low non-illuminated directional.

• T1 - Backlit Traffic Wayfinding Pylon for Parking Area identification use

• T2 – Backlit Traffic Wayfinding Pylon for directional information

• T3 - Backlit Traffic Wayfinding Pylon for directional information

• T4 – Non-illuminated Traffic Sign for directional use

• T5 – Non-illuminated Row Sign for wayfinding use

• T6 – Backlit Bus stop sign, mounted on a base column of stainless steel.

• T7 - Backlit Lane Sign for identification of lane use, mounted on a base column of stainless steel

• T8 – Non-illuminated directional sign, mounted on a gantry.

• T9 – Non-illuminated Exit sign or row number sign, to be mounted on walls, columns or on shading structure

O:\Signages\ITP-MST-Spec and ITT

Examples for Types

NORTH PIER: 531 SIGNS

FORCOURT NORTH: 538 SIGNS

WEST PIER: 454 SIGNS

Total Number of Signagers DMIA

PTB: 2907 SIGNS

FORCOURT SOUTH: 511 SIGNS

TRAFFIC CONCOURCE: 191 SIGNS

SOUTH PIER: 576 SIGNS

Total : 6120 Nos

• Graphics are text and pictograms either cut in foil or printed directly on the lacquered aluminum panel.

In both cases editable graphic vector files shall be produced by the Contractor based on the graphic

manual. An alternative may be to cut the graphics by computer controlled equipment, in colored foil.

This solution may be more resistant to the weather conditions the signage is going to be used in.

• For Non-illuminated Signage, graphics are text and pictograms either cut in foil or printed directly on the

lacquered aluminum panel.

Sign Graphic and Color System

• Color: All visible cabinet surfaces shall be coated with polyester powder coating ensuring an even, smooth and full covering semi gloss surface, semi gloss defined as approximately 60% reflection.

A lifetime of ten (10) years is required.

O:\Signages\Drawings and Key Plans O:\Signages\ITP-MST-Spec and ITT

.

Examples for Color and Graphics

Brackets and Installation

• All products shall be new and un-used, and shall be of manufacturer's current and standard production.

• Place the brackets in position and weld brackets to the structure as per the shop drawings .

• All site welding works on brackets will be carried out using a qualified welding procedure specification (WPS)

& qualified welders.

• Fix the brackets to the Wall with correct Bolts,nuts; fishers etc.

• Fix the signage structure to the brackets with correct bolts.

Ceiling Mounting Samples

Any anchor fails to meet any of the below acceptance criteria shall be rejected:- Drill bit diameter shall be equaled to diameter of sleeve

- No existing reinforcement/services in the base material shall be damaged during drilling .

- Drill-holes shall be thoroughly cleaned before inserting.

- Check each installed anchor visually.

- Reject all anchors that are over-torque.

Inspection Procedure for Anchor Installation

- Calibrated torque wrench shall be used to apply the required torque.

DMIA

High performance anchor (W-FAZ/S & W-FAZ/A4) is a torque-controlled expansionanchor. The geometrically optimized expansion sleeve of W-FAZ allows better performance. It consists of a conical bolt, expansion sleeve, hexagonal nut and washer.

DMIAEngineer comments

Distortion due to welding

Damages at corners

Damages while fixing DMIA

Damages on back corners

Improper shades

Approved samples

ITP: Inspection Test Plan

ITP:SE-TAS-03AR-ITP-0003- Rev.3

ITP,MST,Spec and ITT of Signages

DMIA

MST:SE-TAS-03AR-MST-0003- Rev.3

ITT (Invitation To Tender):SE-000-I-11901- Rev.3ISSUED DATE:15.06.2009

SPEC:SE-BEB-03EG-SPC-1040

Method Statement

Specifications

Inspection Test Plan (ITP)

Approved IFC Drawings

Quality Procedures

D E S K S T U D Y

MST Procedure

Specification requirement s

Work as per Control Sample and Mock up

Follow up ITP Activities

Previous approved and rejected Activities

Observations

SITE VISIT

FINAL ACCEPTANCE

Work as per MST and Specification

As per Approved IFC drawings

Documents Verifications

Collecting documents with reference to ITP

Preparation of ITR cover pages

Aconex Submission to Hill International

Result &

Repeat

Advantages of the cycle: ZERO REWORK

ZERO QUALITY ISSUES

ZERO REJECTIONS

Inspection Process DMAI

Reference Drawings and Documents of Signages

O:\Signages\ITP-MST-Spec and ITT

O:\Signages\Drawings and Key Plans : All sign type drawings, section , Elevation, Key plans and approved Mockup drawing.

O:\Signages\Details and references : Sign code with reference drawing numbers and location details of signs.

O:\Signages\Previous Engineer comments and approved mockup images

O:\Signages\Presentation

DMIA

THANK YOU