sign face legend · langan engineering and environmental services, inc. filename:...

$: Sign Face Legend · Langan Engineering and Environmental Services, Inc. Filename: \\langan.com\data\LAW\data1\620011101\Project Data\CAD\04\SheetFiles\01 Development Plan Set\620011104-SS101-0101.dwg$
200 Union Boulevard, Suite 200

Lakewood, CO 80228

T: 303.262.2000 F: 303.262.4901 www.langan.com

© 2

01

9 L

an

ga

n

Langan Engineering and

Environmental Services, Inc.

Filename: \\langan.com\data\LAW\data1\620011101\Project Data\CAD\04\SheetFiles\01 Development Plan Set\620011104-SS101-0101.dwg Date: 11/27/2019 Time: 02:01 User: dfrost Style Table: Langan.stb Layout: CS105

Sign Face Legend

SYMBOL SIGN TYPES-1 Stop SignS-2 Do Not EnterS-3 Speed Limit, 5 MPH

S-3(mod) Speed Bump Sign w/ 5 MPH PlacardS-4 Speed Limit, 10 MPH

S-4(mod) Speed Hump Sign w/ 10 MPH PlacardS-5(L) Pedestrian Crossing, Left Arrow( S-5(R) OPP.)S-7(L) One Way, Left Arrow (S-7(R) OPP.)S-9(L) Left Turn Only (S-9(R) OPP.)

S-11(L) No Left Turn (S-11(R) OPP.)S-12 No U TurnS-13 Trucks ProhibitedS-14 No ParkingS-15 ADA Accessible Car ParkingS-16 ADA Accessible Van ParkingS-17 No TrespassingS-18 No Parking Fire LaneS-19 Stormwater Warning SignS-20 Emergency Vehicles Only

Tenant Sign Face Legend

SYMBOL SIGN TYPEAS-1 Address SignAS-2 Trucks/Visitor UsherAS-5 Yard RulesAS-6 Truck EntranceAS-7 Driver's LoungeAS-8 Receiving Driver EntranceAS-9 Shipping Driver Entrance

AS-10 Tractor ParkingAS-12 Trailer 3FT From WallAS-13 No EntranceAS-14 No Exit

AS-15(L) Exit, Left Arrow (AS-15(R) OPP)AS-16 Wayfinding

AS-17(L) Drop-Off/Pick-Up Area, Left Arrow (AS-17(R) OPP) (S-7(S) Straight Arrow)AS-20 Dock NumbersAS-22 Drop-Off and Pick-UpAS-23 Associate of the MonthAS-24 Visitor ParkingAS-25 Vendor ParkingAS-26 Muster AreaAS-29 Motorcycle ParkingAS-30 Non-Smoking AreaAS-31 Customer ParkingAS-C# Parking Location (AS-O#, AS-B#, AS-R#, AS-G#, AS-P#, AS-Y#)

Pavement Graphic Legend

SYMBOL GRAPHIC TYPEPG-1 Stop BarPG-5 Straight Arrow

PG-6(L) Left Turn Arrow (PG-6(R) OPP.)PG-7(R) Straight or Right Turn Arrows (PG-7(L) OPP.)

PG-8 Left or Right Turn ArrowPG-9 Left, Straight, or Right Turn Arrows

PG-10 18" Striping Outline and Fill at 45 DegreesPG-11 12" Striping Outline and Hatch @ 36" O.C. (White)PG-12 12" Striping Outline and Hatch @ 36" O.C. (Yellow)PG-14 Trailer Space NumberingPG-15 Speed HumpPG-16 Speed BumpPG-17 ADA Accessible Car ParkingPG-18 ADA Accessible Van ParkingPG-20 Pedestrian TablePG-21 Empty Trailer SlipPG-22 Tractor Dock ParkingPG-23 Jack Stand AreaPG-24 Warning Line


Lakewood, CO 80228

T: 303.262.2000 F: 303.262.4901 www.langan.com

© 2

01

9 L

an

ga

n



Filename: \\langan.com\data\LAW\data1\620011101\Project Data\CAD\04\SheetFiles\01 Development Plan Set\620011104-SS101-0101.dwg Date: 11/27/2019 Time: 02:01 User: dfrost Style Table: Langan.stb Layout: CS106

Sign Face Legend

SYMBOL SIGN TYPES-1 Stop SignS-2 Do Not EnterS-3 Speed Limit, 5 MPH

S-3(mod) Speed Bump Sign w/ 5 MPH PlacardS-4 Speed Limit, 10 MPH

S-4(mod) Speed Hump Sign w/ 10 MPH PlacardS-5(L) Pedestrian Crossing, Left Arrow( S-5(R) OPP.)S-7(L) One Way, Left Arrow (S-7(R) OPP.)S-9(L) Left Turn Only (S-9(R) OPP.)

S-11(L) No Left Turn (S-11(R) OPP.)S-12 No U TurnS-13 Trucks ProhibitedS-14 No ParkingS-15 ADA Accessible Car ParkingS-16 ADA Accessible Van ParkingS-17 No TrespassingS-18 No Parking Fire LaneS-19 Stormwater Warning SignS-20 Emergency Vehicles Only

Tenant Sign Face Legend

SYMBOL SIGN TYPEAS-1 Address SignAS-2 Trucks/Visitor UsherAS-5 Yard RulesAS-6 Truck EntranceAS-7 Driver's LoungeAS-8 Receiving Driver EntranceAS-9 Shipping Driver Entrance

AS-10 Tractor ParkingAS-12 Trailer 3FT From WallAS-13 No EntranceAS-14 No Exit

AS-15(L) Exit, Left Arrow (AS-15(R) OPP)AS-16 Wayfinding

AS-17(L) Drop-Off/Pick-Up Area, Left Arrow (AS-17(R) OPP) (S-7(S) Straight Arrow)AS-20 Dock NumbersAS-22 Drop-Off and Pick-UpAS-23 Associate of the MonthAS-24 Visitor ParkingAS-25 Vendor ParkingAS-26 Muster AreaAS-29 Motorcycle ParkingAS-30 Non-Smoking AreaAS-31 Customer ParkingAS-C# Parking Location (AS-O#, AS-B#, AS-R#, AS-G#, AS-P#, AS-Y#)

Pavement Graphic Legend

SYMBOL GRAPHIC TYPEPG-1 Stop BarPG-5 Straight Arrow

PG-6(L) Left Turn Arrow (PG-6(R) OPP.)PG-7(R) Straight or Right Turn Arrows (PG-7(L) OPP.)

PG-8 Left or Right Turn ArrowPG-9 Left, Straight, or Right Turn Arrows

PG-10 18" Striping Outline and Fill at 45 DegreesPG-11 12" Striping Outline and Hatch @ 36" O.C. (White)PG-12 12" Striping Outline and Hatch @ 36" O.C. (Yellow)PG-14 Trailer Space NumberingPG-15 Speed HumpPG-16 Speed BumpPG-17 ADA Accessible Car ParkingPG-18 ADA Accessible Van ParkingPG-20 Pedestrian TablePG-21 Empty Trailer SlipPG-22 Tractor Dock ParkingPG-23 Jack Stand AreaPG-24 Warning Line

P

Filename: \\langan.com\data\LAW\data1\620011101\Project Data\CAD\04\SheetFiles\01 Development Plan Set\620011104-SS501-0101.dwg Date: 11/26/2019 Time: 20:52 User: nnaveed Style Table: Langan.stb Layout: SS501


Lakewood, CO 80228

T: 303.262.2000 F: 303.262.4901 www.langan.com

© 2

01

9 L

an

ga

n



PG-17

4'-0" x 4'-0"

Pavement graphics- standard accessible parking space.

Use at all accessible parking spaces.

Thermal applied graphics, white symbol with blue background.

PG-7(R) (PG-7(L) OPP.)

Approx. 8'-0" x 12'-0"

Pavement graphics- straight or right turn arrow.

Use to indicate turning lanes.

White thermal-applied graphic

PG-5

Pavement graphics- straight arrow.

Use to direct traffic at one-way drive aisles.

White thermal-applied graphic.

PG-6(L) (PG-6(R) OPP.)

Approx. 8'-0" x 8'-0"

Pavement graphics- left turn arrow.



PG-8

Approx. 10'-0" x 8'-0"

Pavement graphics- left or right turn arrow.



PG-9

Approx. 10'-0" x 12'-0"

Pavement graphics- left, straight, or right turn arrow.



PG-10

Pavement graphics- traffic island

Use to prohibit vehicle travel and parking.

Stripes; yellow at no traffic, blue at accessible

parking spaces, white at vendor parking (black indicates asphalt).

Include at emergency exits into the parking lot at all parking spaces

that impede direct access to the thoroughfare.

TRAFFIC ISLAND

PG-11

12" striping outline and hatch fill at 36" O.C.

Pavement graphics- pedestrian crosswalk.

Use to pedestrian crossing.

White stripes, see plan for width of crosswalk.

PG-1

Width of Lane x 2'-0"

PG-12

12" striping outline and hatch fill at 36" O.C.

Pavement graphics- driver entrance.

Use to direct driver entrance in dock field.

Position in truck court to correspond with the location of the

truckers lounge and truckers entry points.

Yellow stripes, see plan for width of crosswalk.

PG-16

12'-0" x 1'-0"

PG-18

4'-0" x 5'-5

1

2

"

Pavement graphics- standard accessible parking space.

Use at all van accessible parking spaces.

Thermal applied graphics, white symbol with blue background,

and white text.

VAN

DOCK PARKING

Contains PG-14, PG-22, and PG-24

Stripe and Thermal Applied Graphics

PG-20

Pedestrian Table Pavement Graphics

PG-15

20'-0" wide

Pavement graphics- large speed bump.

Use to control speed at outlying drive areas.

White thermal applied white arrows. Asphalt speed humps shall be

used in colder climates where snow removal equipment is intended to

be used. Rubber speed humps may be used in warmer climates or

regions where concrete pavement is prevalent

PG-24

WARNING LINE

4" Wide Stripe Orange Pantone 021C Line and Graphics

PG-23

Jack Stand Area

Thermal Applied Black Graphics

125

PG-14

5'-0" x 3'-6" (24" tall lettering)

Pavement graphics- trailer space numbering.

Use to label trailer spaces. typical all truck spaces.

Black Box with White Numbering thermal applied graphics .

See plans for dock door numbers. Coordinate numbers with tenant of trailer parking.

TRAILER PARKING

Contains PG-14 and PG-21



Lakewood, CO 80228

T: 303.262.2000 F: 303.262.4901 www.langan.com

© 2

01

9 L

an

ga

n



POST AND PANEL SIGNS

MOUNTING U-1E, U-1C, U-2

SPECIFICATIONS

ALSO SEE GENERAL CONSTRUCTION AND INSTALLATION INSTRUCTIONS.

DESCRIPTION

1. POST AND PANEL SIGNS WITH STANDARD SIZED "MUTCD" AND CUSTOM SIGN FACES.

2. MATERIALS AND CONSTRUCTION

3. SIGNS TO CONSIST OF ALUMINUM SIGN PANEL ON 2" SQUARE STEEL POST.

4. PANEL TO CONFORM TO "MUTCD" SPECIFICATIONS. SOLID ALUMINUM PANEL, 0.08" THICK.

COMPOSITE MATERIALS ARE NOT ACCEPTABLE.

5. POSTS ARE TO BE 2" SQUARE STEEL, 12 GA. 7/16" PERFORATION ON 1" CENTERS. FOUR SIDES

TO BE APPROXIMATELY 12' LONG.

6. SUPPORTS ARE TO BE SUFFICIENT FOR SECURE MOUNTING OF SIGN.

7. ALL HARDWARE SHALL BE NON-CORROSIVE. IF ADDITIONAL THICKNESS OF MATERIAL OR

ADDITIONAL INTERNAL BRACING IS REQUIRED FOR SECURE INSTALLATION OR TO PROVIDE

STABILITY, ALTERATIONS SHALL BE REFLECTED IN SHOP DRAWINGS. WIND LOADING AND

DURABILITY SHALL BE TAKEN INTO ACCOUNT IN THE ENGINEERING OF THE SIGN.

8. GRAPHICS AND TYPOGRAPHY SIGN GRAPHICS ARE TO BE HEAVY DUTY '3M' REFLECTIVE VINYL.

9. CUSTOM GRAPHICS AND TYPOGRAPHY SIGNS ARE AVAILABLE FROM THE OWNER AS

ELECTRONIC FILES

10. COLORS ARE INDICATED ON THE DESIGN INTENT DRAWINGS. ADDITIONAL COLOR AND FINISH

SPECIFICATIONS ARE FOUND IN THE GENERAL SPECIFICATIONS.

11. ALL SIGNS INDICATED "DOT" SHALL CONFORM TO THE CURRENT MANUAL ON UNIFORM

TRAFFIC CONTROL DEVICES FROM THE FEDERAL HIGHWAY ADMINISTRATION.

INSTALLATION

1. LOCATIONS ARE GENERALLY NOTED ON THE ATTACHED LOCATION PLANS. THE CONTRACTOR

IS RESPONSIBLE FOR FILED VERIFYING ALL INSTALLATION CONDITIONS PRIOR TO

FABRICATION.

2. MOUNTING U-1e SHALL BE USED FOR SIGNS IN COMPACTED EARTH. MOUNTING U-1c SHALL BE

USED FOR SIGNS ON CONCRETE OR ASPHALTIC PAVING.

3. MOUNTING U-1e PROVIDES A 36" MOUNTING TUBE (2 1/4" SQUARE STEEL POST DRIVE TO 1" TO

2" ABOVE GRADE. THE MOUNTING TUBE IS PAIRED WITH AN 18" BREAKAWAY SUPPORT TUBE (2

1/4" SQUARE STEEL POST). THE SIGN POST SINKS TO THE BASE OF THE ANCHOR TUBE AND

FASTENS TO THE ANCHOR TUBE AND BREAKAWAY SUPPORT WITH AN ANGLE BOLT.

4. INTENTIONALLY OMITTED.

5. TYPICAL SIGN PANEL INSTALLS BOTTOM OF SIGN AT 7'-0" ABOVE FINISHED GRADE. THE POST

EXTENDS TO WITHIN 2" OF THE TOP OF THE SIGN PANEL. INSTALLATION SHALL BE PLUMB,

LEVEL, AND STRAIGHT.

6. MOUNTING U-2 PROVIDES TWO POLE SUPPORT SIMILAR TO THE MOUNTING U-1e.

ADDITIONALLY, U-2 REQUIRES CROSS BRACING OF STRUCTURAL ANGLE ON THE BACK OF THE

SIGN FACE.

7. TOP OF U-2 MOUNTED SIGN SHALL BE AT 8'-0" ABOVE FINISHED GRADE. INSTALLATION SHALL

BE PLUMB, LEVEL, AND STRAIGHT.

8. THE INSTALLATION METHODS AND DETAILS FOR EACH LOCATION SHALL BE ILLUSTRATED IN

THE SUBMITTED SHOP DRAWINGS. FINAL LOCATION WILL BE APPROVED ON THE SITE BY THE

TENANT OR HIS REPRESENTATIVE.

9. SIGN POSTS INSTALLED IN COMPACTED EARTH OR SIDEWALK SHALL BE 18" MIN. FROM FACE

OF CURB.

SUBMITTALS

THE FOLLOWING SHALL BE SUBMITTED FOR APPROVAL PRIOR TO FABRICATION - (3) SETS OF

SHOP DRAWINGS AND (3) 6"X6" VINYL SAMPLES OF EACH SIGN FACE COLOR. SEE GENERAL

CONSTRUCTION AND INSTALLATION SPECIFICATIONS FOR ADDITIONAL SUBMITTALS.

MONUMENT SIGNS

SIGN CONSTRUCTION NOTES

1. SIGN FACE TO BE SATIN WHITE, HALO LIGHTED AT PERIMETER

2. OUTER SURFACES TO BE PAINTED TO MATCH BUILDING COLORS.

3. INTERIOR SURFACES TO BE PAINTED GLOSS WHITE.

4. "AMAZON" - ACRYLIC PUSH-THRU GRAPHICS, OPAQUE BLACK SURFACE, HALO LIGHTED.

5. AMAZON "SMILE" - ACRYLIC PUSH-THRU GRAPHICS, TRANSLUCENT BLUE.

6. DIRECTIONAL TEXT - ACRYLIC PUSH-THRU GRAPHICS, OPAQUE BLACK SURFACE, HALO LIGHTED.

7. DIRECTIONAL ARROWS - ACRYLIC PUSH-THRU GRAPHICS, OPAQUE BLACK SURFACE, HALO LIGHTED.

8. AMAZON LOGO - ACRYLIC PUSH-THRU GRAPHICS, OPAQUE BLACK SURFACE, HALO LIGHTED.TENANT LOGO

See Placard Detail

See Placard Detail

Building Adress



Lakewood, CO 80228

T: 303.262.2000 F: 303.262.4901 www.langan.com

© 2

01

9 L

an

ga

n



℄ ℄

℄℄

Filename: \\langan.com\data\LAW\data1\620011101\Project Data\CAD\04\SheetFiles\01 Development Plan Set\620011104-CS501-0101.dwg Date: 11/27/2019 Time: 14:12 User: nnaveed Style Table: Langan.stb Layout: CS501-0201


Lakewood, CO 80228

T: 303.262.2000 F: 303.262.4901 www.langan.com

© 2

01

9 L

an

ga

n



1' - 3"

1 1/2" 1' - 0" 1 1/2"

10"

5"

5"

8' - 0"

1 1/2" 7' - 9" 1 1/2"

24"

1/2"

SET PIN 1/2" BELOW TOP

OF WHEEL STOP AND FILL

WITH SEALANT - TYPICAL

PROVIDE 3 - 1" HOLES IN WHEEL

STOP FOR ANCHORING

24" X 3/4" DIA STEEL DOWEL

ANCHORS - TYPICALTRUCK WHEEL STOP - TYPICAL

9"

2 1/2" 4" 2 1/2"

61

/2"

3"

31

/2"

6' - 0"

2 1/2" 5' - 7" 2 1/2"

24"

1/2"

SET PIN 1/2" BELOW TOP OF

WHEEL STOP AND FILL WITH

SEALANT - TYPICAL

PROVIDE 2 - 1" HOLES IN WHEEL

STOP FOR ANCHORING

24" X 3/4" DIA STEEL DOWEL

ANCHORS - TYPICALAUTO WHEEL STOP - TYPICAL

BY:

DATE:

REV: SCALE:

DWG. NO.

8' WIDE x 3' TO 12' HIGH

(Nom.Dimension)

J.R.

D.D.

7 AUG 13

GUARDSMAN PANEL - MONROE

NOT TO SCALE

Merchants Metals

the first name in fence solutions

GUARDSMAN PANEL - MONROE

NOTES:

1. SPECIFICATIONS SHOWN CAN BE CHANGED BY

THE MANUFACTURER ONLY.

2. ALL COMPONENTS OF THE PANEL TO BE COATED

BLACK. OTHER COLORS AVAILABLE.

3. VERIFY POST DEPTH AND FOOTING DIMENSIONS

WITH LOCAL CODES AND SITE CONDITIONS.

4. CUSTOM DIMENSIONS ARE AVAILABLE UPON

REQUEST.

2 RAILS

3

7

8

" TYP.

7'-7

3

4

" FACE TO FACE OF POST

2"

4"

HE

IG

HT

V

AR

IE

S

BLACK PRESSED STEEL SQUARE POST CAP

UNIVERSAL BRACKET - SEE DETAIL; SEE

SECURITY BRACKET DETAIL FOR ALTERNATE

INDUSTRIAL DRIVE RIVET

BLACK POWDER COATED 1" SQ. PICKET -

14GA, 16GA, OR 18GA

BLACK POWDER COATED STEEL POST - SEE

POST SIZING CHART

BLACK POWDER COATED 1-3/8" X 1-1/2" 11 GA

U-CHANNEL RAIL

CONCRETE (BY OTHER)

SE

E P

LA

N

GUARDSMAN SECURITY BRACKET

BOLT

NOTE: MINIMUM SHEER STRENGTH 3,000 LBS

AND HOLDING POWER OF 2,200 LBS.


SECURITY BRACKET

MACHINE NUT

HEIGHT OF FENCE SIZE OF POST

3' OR LESS 2"x14 GA

4' TO 6' 2 1/2"x14 GA

7' TO 9' 3"x12 GA

10' TO 12' 4"X11 GA

POST SIZING CHART

SE

E P

OS

T

HEIGHT OF FENCE POST BELOW

GRADE

5' OR LESS

2'

6' OR MORE

3'

POST DEPTH CHART*

* SEE NOTE 3

DE

PT

H C

HA

RT

UNIVERSAL BRACKET

DETAIL 1"=1'-0"

MACHINE BOLT w/ NUT

UNIVERSAL BRACKET

SELF TAPPING SCREW

SELF-TAPPING BOLT

GATE UPRIGHT

ASSEMBLED HINGE AND

STRAP

POST OF FRAME

HINGE BOLT NUT

HINGE BOLT

1/2" BOLT

(1) NEEDLE-ROLLER

BEARING BETWEEN (2)

WASHERS, BETWEEN

EACH GATE HINGE; 2

SETS PER LEAF

PRESSED STEEL SQUARE HINGE

BY:

DATE:

REV:

SCALE:

DWG. NO.

3' TO 20' WIDE OPENING x 3'-12' HIGH

(Nom.Dimension)

J.R.

D.D.

16 AUG 13

GUARDSMAN GATE - MONROE

NOT TO SCALE

Merchants Metals



2 RAILS

3

7

8

" TYP.

SEE PLAN FOR GATE WIDTH

2"

4"

8'- 0"

SE

E P

OS

T

NOTES:

1. SPECIFICATIONS SHOWN CAN BE CHANGED BY THE MANUFACTURER

ONLY.

2. ALL COMPONENTS OF THE GATE TO BE COATED BLACK. OTHER

COLORS AVAILABLE

3. VERIFY POST DEPTH AND FOOTING DIMENSIONS WITH LOCAL CODES

AND SITE CONDITIONS.

4. CUSTOM DIMENSIONS ARE AVAILABLE UPON REQUEST.

5. OUTSIDE LOOKING IN, GATE LATCHES ON ________ (RIGHT AS SHOWN)

6. GATE OPENINGS OVER 8' WILL REQUIRE ADDITIONAL SUPPORT

7. POST SIZE WILL VARY DEPENDING UPON WIDTH AND HEIGHT OF GATE

HEIGHT OF GATE POST BELOW

GRADE

5' OR LESS

2'

6' OR MORE

3'

POST DEPTH CHART*

* SEE NOTE 3

1

1

2

" 3

1

2

"

BLACK PRESSED STEEL SQUARE POST CAP

BLACK 2" PRESSED STEEL SQ CAP


U-CHANNEL RAIL


BLACK POWDER COATED 1" SQ. PICKET -

14GA, 16GA, OR 18GA

FULCRUM LATCH ASSEMBLY w/ STRIKE STRAP

BLACK POWDER COATED STEEL POST - SEE

NOTE 7

1/4" Ø STAINLESS STEEL AIRCRAFT CABLE w/

COMPRESSION SLEEVE AND THIMBLE.

INSTALLED w/ 5/16 Ø EYEBOLT


U-CHANNEL RAIL

PRESSED STEEL HINGE- SEE DETAIL

CONCRETE (BY OTHER)

DE

PT

H C

HA

RT

SELF-TAPPING BOLT

GATE UPRIGHT

ASSEMBLED HINGE AND

STRAP

POST OF FRAME

HINGE BOLT NUT

HINGE BOLT

1/2" BOLT

(1) NEEDLE-ROLLER

BEARING BETWEEN (2)

WASHERS, BETWEEN

EACH GATE HINGE; 2

SETS PER LEAF

PRESSED STEEL SQUARE HINGE

BY:

DATE:

REV:

SCALE:

DWG. NO.

6' TO 40' WIDE OPENING x 3' TO 8' HIGH

(Nom.Dimension)

J.R.

D.D.

30 AUG 13


NOT TO SCALE

Merchants Metals



DOUBLE DRIVE 2 RAILS

3

7

8

" TYP.

SEE PLAN FOR GATE WIDTH

2"

4"

8'-0"

SE

E P

OS

T

HEIGHT OF GATE POST BELOW

GRADE

5' OR LESS

2'

6' OR MORE

3'

POST DEPTH CHART*

* SEE NOTE 3 TO VERIFY

1

1

2

" 3

1

2

"

BLACK 2" PRESSED STEEL SQ CAP

BLACK POWDER COATED 1-3/8" X 1-1/2" 11 GA U-CHANNEL

RAIL


BLACK POWDER COATED1" SQ. PICKET - 14GA, 16GA, OR

18GA

FULCRUM LATCH ASSEMBLY

BLACK POWDER COATED STEEL POST w/ PRESSED STEEL

SQUARE CAP - SEE NOTE 7

1/4" Ø STAINLESS STEEL AIRCRAFT CABLE w/

COMPRESSION SLEEVE AND THIMBLE. INSTALLED w/ 5/16 Ø

EYEBOLT

BLACK POWDER COATED 1-3/8" X 1-1/2" 11 GA U-CHANNEL

RAIL

PRESSED STEEL HINGE- SEE DETAIL

CONCRETE (BY OTHER)

DE

PT

H C

HA

RT

1

1

2

"

DROP ROD GUIDE & ASSEMBLY

NOTES:

1. SPECIFICATIONS SHOWN CAN BE CHANGED BY THE MANUFACTURER

ONLY.

2. ALL COMPONENTS OF THE GATE TO BE COATED BLACK.

3. VERIFY POST DEPTH AND FOOTING DIMENSIONS WITH LOCAL CODES

AND SITE CONDITIONS.

4. CUSTOM DIMENSIONS ARE AVAILABLE UPON REQUEST

5. OUTSIDE LOOKING IN, GATE LATCHES IN THE MIDDLE

6. GATE OPENINGS OVER 8' WILL REQUIRE ADDITIONAL SUPPORT

7. POST SIZE WILL VARY DEPENDING UPON WIDTH AND HEIGHT OF GATE



Lakewood, CO 80228

T: 303.262.2000 F: 303.262.4901 www.langan.com

© 2

01

9 L

an

ga

n



3' 3'

3'

8'-

0"

12' - 0"

LIGHT POLE AND CONCRETE

BASE SEE ELECTRICAL

12" CURB

CONCRETE BASE

15' - 0"

CONCRETE SIDEWALK

TRAILER PARKING

NUMBER ON FENCE

CHAIN LINK FENCE

CROWN TOP OF

CONCRETE 2" TO DRAIN

SET POST IN 12" X 42"

CONCRETE FILLED HOLE

GRAVEL STRIP

WITH #57 STONE

4" DEEP OVER FILTER FABRIC

11' - 0"

1% SLO

PE

FILTER FABRIC

3' - 0"

handi-hut inc.



Lakewood, CO 80228

T: 303.262.2000 F: 303.262.4901 www.langan.com

© 2

01

9 L

an

ga

n



sign face legend · langan engineering and environmental services, inc. filename:...

Documents