shower door hardware - absupply.netshower door knobs and finger pulls specifications: glass...
TRANSCRIPT
Shower Door Hardware
R
Index
Shower Door Hinges
Sliding Glass Door System
Shower Door Pull Handles
Shower Door Towel Bars
Shower Door Knobs & Finger Pulls
Shower Door Mini Hinges & Glass Clamps
Shower Door Polycarbonates
1~7
8
9
10
11
12
13
Accessories
3/8”
TemperedGlass
2 Hinges
36”140 lbs
3 Hinges
1/2”
TemperedGlass
32”100 lbs
2 Hinges
36”140 lbs
3 Hinges
90oOpening
Two Screw HeadsTwo Screw Heads
90oOpening
36”100 lbs
Finishes
1
Heavy Duty Shower Glass Door Hinges
Specifications:
Solid Brass Drop Forged Construction
Glass Thickness: 3/8” (10mm) to 1/2” (12mm)
Heavy Duty Shower HingesFull Backplate
Stainless Steel Hardened Coil Springs and Pin
90 Degree Opening angles
Self centering within 15 degrees from closing position
Industry standard fits typical glass cutout templates
both mouse ears and square corner
Tempered Glass
Product
HSHDL037LCPHSHDL037LBSNHSHDL037LUS10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
0 Degree
Heavy Duty Square CornerWall to Glass Shower HingeFull Backplate
2 - 5/16"
2 - 9/16" 2-3/16”
1-1/2”
3-1
5/16
”
3 -3
/16”
Accessories - gaskets, Stainless steel mounting screws,
Allen wrench, template cut out dimensions.
Supplied with both Phillips and Allen Key screw heads
Finishes
Product
HSHDS037SCPHSHDS037SBSNHSHDS037SUS10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
0 Degree
2”
2 -
3/4”
2 - 1/4”
1 - 1/2”
2
Heavy Duty Shower Glass Door Hinges
Heavy Duty Shower HingesShort Backplate
Accessories
3/8”
TemperedGlass
2 Hinges
36”140 lbs
3 Hinges
1/2”
TemperedGlass
32”100 lbs
2 Hinges
36”140 lbs
3 Hinges
90oOpening
Two Screw HeadsTwo Screw Heads
90oOpening
2 - 5/16"
2 - 9/16"
Heavy Duty Square CornerWall to Glass Shower HingeShort Backplate
2-1/4”
1-1/2”
2 -
3/4”
2”
Specifications:
Solid Brass Drop Forged Construction
Glass Thickness: 3/8” (10mm) to 1/2” (12mm)
Stainless Steel Hardened Coil Springs and Pin
90 Degree Opening angles
Self centering within 15 degrees from closing position
Industry standard fits typical glass cutout templates
both mouse ears and square corner
Tempered Glass
Accessories - gaskets, Stainless steel mounting screws,
Allen wrench, template cut out dimensions.
Supplied with both Phillips and Allen Key screw heads
36”100 lbs
Product
HSBV037LCCPHSBV037LBBSNHSHDB037LUS10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
0 Degree
3 -
15/1
6”
3 -
3/16
”
2 - 3/16”
1 - 1/2”
3
Heavy Duty Shower Glass Door Hinges
Heavy Duty Shower HingesH Type Full Backplate
Accessories
3/8”
TemperedGlass
36”100 lbs
2 Hinges
36”140 lbs
3 Hinges
1/2”
TemperedGlass
32”100 lbs
2 Hinges
36”140 lbs
3 Hinges
90oOpening
Two Screw HeadsTwo Screw Heads
90oOpening
2 - 5/16"2 - 9/16"
Heavy Duty Beveled CornerWall to Glass Shower HingeH Type Full Backplate
Finishes
2-3/16”1-1/2”
3 - 1
5/16
”
3 - 3
/16”
Specifications:
Solid Brass Drop Forged Construction
Glass Thickness: 3/8” (10mm) to 1/2” (12mm)
Stainless Steel Hardened Coil Springs and Pin
90 Degree Opening angles
Self centering within 15 degrees from closing position
Industry standard fits typical glass cutout templates
both mouse ears and square corner
Tempered Glass
Accessories - gaskets, Stainless steel mounting screws,
Allen wrench, template cut out dimensions.
Supplied with both Phillips and Allen Key screw heads
Product
HSHDBA237LCPHSHDBA237LBSNHSHDBA237LUS10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
0 Degree
3 -
15/1
6”
3 -
3/16
”
2 - 3/16”
1 - 1/2”
4
Heavy Duty Shower Glass Door Hinges
AdjustableHeavy Duty Shower HingesH Type Full Backplate
Accessories
3/8”
TemperedGlass
36”100 lbs
2 Hinges
36”140 lbs
3 Hinges
1/2”
TemperedGlass
32”100 lbs
2 Hinges
36”140 lbs
3 Hinges
90oOpening
Two Screw HeadsTwo Screw Heads
90oOpening
2 - 5/16"2 - 9/16"
AdjustableHeavy Duty Beveled CornerWall to Glass Shower HingeH Type Full Backplate
Finishes
2-3/16”1-1/2”
3 - 1
5/16
”
3 - 3
/16”
Specifications:
Solid Brass Drop Forged Construction
Glass Thickness: 3/8” (10mm) to 1/2” (12mm)
Stainless Steel Hardened Coil Springs and Pin
90 Degree Opening angles
Self centering within 15 degrees from closing position
Industry standard fits typical glass cutout templates
both mouse ears and square corner
Tempered Glass
Accessories - gaskets, Stainless steel mounting screws,
Allen wrench, template cut out dimensions.
Supplied with both Phillips and Allen Key screw heads
5
Classic Shower Hinges
Classic Shower HingesSquare Corner
Specifications:
Solid Brass Drop Forged Construction
Glass Thickness: 3/8” (10mm) to 1/2” (12mm) Tempered Glass
Stainless Steel Hardened Coil Springs and Pin
90 Degree Opening angles
Self centering within 15 degrees from closing position
Industry standard fits typical glass cutout templates
Supplied with Phillips screw heads
Accessories - gaskets, Stainless steel mounting screws,
Allen wrench, template cut out dimensions.
3.54
”
2.76
”
1.97”1.38”
3/8”
TemperedGlass
1/2”
TemperedGlass
28”80 lbs
2 Hinges
26”80 lbs
2 Hinges
32”120 lbs
3 Hinges
30”120 lbs
3 Hinges
Accessories
90oOpening 90oOpening
Classic Square Corner Wall to GlassShower Hinge
Full Backplate
M037-PCM037-BNM037-US10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
0 Degree
Full Backplate
M037-PC-5CM037-BN-5CM037-US10B-5C
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
5 Degree
Short Backplate
SHS037S-CP-0CSHS037S-BN-0CSHS037S-US10B-0C
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
0 Degree
Short Backplate
SHS037S-CPSHS037S-BNSHS037S-US10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
5 Degree
Classic Shower Hinges
6
Classic Shower HingesOffset Full Backplate
Specifications:
Solid Brass Drop Forged Construction
Glass Thickness: 3/8” (10mm) to 1/2” (12mm) Tempered Glass
Stainless Steel Hardened Coil Springs and Pin
90 Degree Opening angles
Self centering within 15 degrees from closing position
Industry standard fits typical glass cutout templates
Supplied with Phillips screw heads
Accessories - gaskets, Stainless steel mounting screws,
Allen wrench, template cut out dimensions. 2.24
”
1.97”
3/8”
TemperedGlass
1/2”
TemperedGlass
28”80 lbs
2 Hinges
26”80 lbs
2 Hinges
32”120 lbs
3 Hinges
30”120 lbs
3 Hinges
Accessories
90oOpening 90oOpening
Classic Square Corner Wall to GlassShower Hinge Offset Full Backplate
Product
M039-PCM039-BSNM039-US10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
Product
M039-PC-5CM039-BSN-5CM039-US10B-5C
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
0 Degree
5 Degree
7
Silhouette Shower Hinges
Silhouette Shower HingesH Type Backplate
Specifications:
Solid Brass Drop Forged Construction
Glass Thickness: 3/8” (10mm) to 1/2” (12mm) Tempered Glass
Stainless Steel Hardened Coil Springs and Pin
90 Degree Opening angles
Self centering within 15 degrees from closing position
Industry standard fits typical glass cutout templates
Supplied with Allen Key screw heads
Accessories - gaskets, Stainless steel mounting screws,
Allen wrench, template cut out dimensions.
3.54
”
2.76
”
1.97”1.38”
3/8”
TemperedGlass
1/2”
TemperedGlass
28”80 lbs
2 Hinges
26”80 lbs
2 Hinges
32”120 lbs
3 Hinges
30”120 lbs
3 Hinges
Accessories
90oOpening 90oOpening
Beveled Corner Wall to GlassShower Hinge H Type Backplate
Product
SHB037L-CPSHB037L-BN
Finish
Polished ChromeBrushed Nickel
0 Degree
8
Silhouette Shower Hinges
Silhouette Shower HingesH Type Backplate
Specifications:
Solid Brass Drop Forged Construction
Glass Thickness: 3/8” (10mm) to 1/2” (12mm) Tempered Glass
Stainless Steel Hardened Coil Springs and Pin
Self centering within 15 degrees from closing position
Industry standard fits typical glass cutout templates
Supplied with Allen Key screw heads
Accessories - gaskets, Stainless steel mounting screws,
Allen wrench, template cut out dimensions.
3.54
”
2.76
”
1.97”1.38”
3/8”
TemperedGlass
1/2”
TemperedGlass
28”80 lbs
2 Hinges
26”80 lbs
2 Hinges
32”120 lbs
3 Hinges
30”120 lbs
3 Hinges
Accessories
90oOpening 90oOpening
Beveled Corner Wall to GlassShower Hinge H Type Backplate
Product
SHB237L-CPSHB237L-BN
Finish
Polished ChromeBrushed Nickel
0 Degree
90 Degree Opening angles
Shower Door Pull Handles
Specifications:
Brass or Stainless Steel Tubing
Tube Diameter: 3/4”
Rockwell Contemporary SquareBack to Back PullsSize: 8” CTC
Cutout: 1/2” holes CTC 8” or 6”
Finishes: Chrome, Brushed Nickel, Bronze
Product
SDHQ8-PSSDHQ8-BSLSDHQ8-ORB
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
Glass Thickness Range: 1/4” to 1/2”
1/4” ~1/2”
TemperedGlass
Accessories
Rockwell Crescent Back to Back PullsSize: 8” CTC
Product
SDH-CR8-PSSDH-CR8-BSSDH-CR8-ORB
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
Rockwell Classic Back to Back PullsSize: 6” or 8”
Product
SDH3/4-6-PSSDH3/4-6-BSSDH3/4-6-US10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
SDH3/4-8-PSSDH3/4-8-BSSDH3/4-8-US10B
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
Decorative Metal Washers
Product
MWPS-SSMWBS-SSMWUS10B-SS
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
9
Shower Door Towel Bars
Specifications:
Brass or Stainless Steel Tubing
Tube Diameter: 3/4”
Cutout: 1/2” holes
Finishes: Chrome, Brushed Nickel, Bronze
Glass Thickness Range: 1/4” to 1/2”
1/4” ~1/2”
TemperedGlass
Accessories
Rockwell Classic Towel BarsSize: 18” to 28”
Product
SDP3/4-18-PSSDP3/4-18-BSSDP3/4-18-ORB
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
SDP3/4-20-PSSDP3/4-20-BSSDP3/4-20-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
18”
20”
SDP3/4-22-PSSDP3/4-22-BSSDP3/4-22-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
SDP3/4-24-PSSDP3/4-24-BSSDP3/4-24-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
22”
24”
SDP3/4-26-PSSDP3/4-26-BSSDP3/4-26-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
SDP3/4-27-PSSDP3/4-27-BSSDP3/4-27-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
26”
27”
SDP3/4-28-PSSDP3/4-28-BSSDP3/4-28-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze28”
Rockwell Classic Towel Bar COMBOSize: 18” and 24”
Product
SDTB3/4-6x18-PSSDTB3/4-6x18-BSSDTB3/4-6x18-ORB
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
SDTB3/4-6x24-PSSDTB3/4-6x24-BSSDTB3/4-6x24-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
6x18”
6x24”
SDTB3/4-8x18-PSSDTB3/4-8x18-BSSDTB3/4-8x18-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
SDTB3/4-8x24-PSSDTB3/4-8x24-BSSDTB3/4-8x24-ORB
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
8x18”
8x24”
1/4” ~1/2”
TemperedGlass
Accessories
Metal Washers
Product
MWPS-SSMWBS-SSMWUS10B-SS
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
10
11
Shower Door Knobs and Finger Pulls
Specifications:
Glass Thickness Range: 1/4” to 1/2”
Knob
SDK03x1-CPSDK03x1-BNSDK03x1-US10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
Knob
SKDS03x2-CPSDKS03x2-BN
Finish
Polished ChromeBrushed Nickel
The Shower Door Knob is made ofSolid Brass and is ideal for standardframeless swinging or sliding doors.
Double Side Knob with Cushion
Product
RS-7470RS-7479RS-747R
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
3/4” Diameter on Side with Cushion forBypass Sliding DoorsHole Diameter: 1/2”
Finger Pull Knob for Towel Bar
Product Finish Product Finish
Finger Pull for Towel Bar
1-1/4” Diameter For Bypass Sliding DoorsHole Diameter: 1/2”
1.05” DiameterFor Bypass Sliding DoorsHole Diameter: 7/8” or 11/16”
Finger Pull Knob
1-1/4” Diameter For Bypass Sliding DoorsHole Diameter: 1/2”
Single Side Knob
3/4” Diameter For Bypass Sliding DoorsHole Diameter: 1/2”
RS-7590RS-7599RS-759R
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
RS-7490RS-7499
Polished ChromeBrushed Nickel
Oil Rubbed BronzeRS-749R
12
Shower Door Mini Hinge & Glass clamps
Product
SDGCSPS
SDGCSBS
Finish
Polished Chrome
Brushed Nickel
Square Wall Mount Glass Clamp
Product
ALMHCPSALMHBN1ALMHUS10B
Finish
Polished ChromeBrushed Nickel
Oil Rubbed Bronze
Used for Wall to Glass installations. For Glass that is 5/16” to 3/8” thickSize: 2” x 2”
Mini Shower HingeUsed for Wall to Glass installations. For Glass that is 1/4” thickCutout: 1”
SDGCSUS10B Oil Rubbed Bronze
1/4”
TemperedGlass
Accessories
5/16” ~
3/8”
Tempered
GlassAccessories
Shower Door Polycarbonates
Specifications:
Product Code
EW06DD-98EW10DD-98
Glass Size
1/4” (6mm)3/8” (10mm)
Length
98”98”
This Seal and Wipe has two uses:
Installed on the door bottom the
soft acts as a wipe; If installed on
the overlapping bi-fold door the
soft lip acts as a seal.
Dual Seal and Wipe
GLASS DOOR
WALL CURB
GLASSDOOR
Clear Bottom Wipe with Drip Rail Product Code
EW06WS-98EW10WS-98
Glass Size
1/4” Extended Wing 3/8” Extended Wing
Length
98”98”
The Clear Bottom Wipe with Drip
Rail is installed on the bottom of
door. Soft wipes on the bottom
provide a tight seal 45
CURB
GLASSDOOR
onto the fixed glass panel with
GLASS DOOR
OPENFIXED PANE L
“H” Jamb Seal Product Code
EW10HJ-98Glass Size
3/8” (10mm)Length
98”The “H” jamb is for use on 180o
inline glass applications. Installed
the lip positioned on the strike
side, or onto the door with the
lip positioned on the hinge side.
Clear Polycarbonates, Vinyl Seals and Edge Wipes
Available in 1/4” (6mm) and 3/8” (10mm) Glass Sizes
o
13
Pr oduct Code
EWSJL98Glass Size
1/2” (12mm)Length
98”This is for use on both hinge
and strike side seal for
frameless shower applications.
Also used on neo-angle glass
“L” Jamb Seal
shower panel as strike jamb.
OPENGLASS DOOR
FIXED PANEL
GLASS DOOR
WALL WALL
ROCKWELL SECURITY INC.
Tel: (510) 270 5633 Fax: (309) 276 2680www.rockwellsecurityinc.com
R