shower accessories shower accessories … · shower accessories mira eco showerhead 196 ... even...

SHOWER ACCESSORIES

MIRA ECO SHOWERHEAD 196 MIRA EVERCLEAR SHOWERHEAD 198 MIRA SHOWERHEAD RANGE 200 MIRA ACCESSORIES 204 MIRA SLIDE BARS 206 MIRA FITTINGS KITS 207 MIRA MIX AND MATCH BAR VALVES AND FITTINGS 210

WHATEVER ACCESSORY YOU’RE LOOKING FOR YOU’LL FIND IT HERE, THEY’RE ALL EASY TO FIT AND MANY WILL EVEN FIT OTHER MAKES AND MODELS OF SHOWER! SO, EVEN IF YOU’RE NOT WORKING WITH A MIRA, YOU CAN STILL ADD A LITTLE MIRA QUALITY, HERE AND THERE

GET YOURSELF ONLINE AND TAKE A LOOK AT OUR WIDE RANGE OF ACCESSORIES; WE HAVE PRODUCTS THAT WILL HELP IMPROVE PERFORMANCE, HELP REFRESH, HELP REPAIR AND EVEN HELP SAVE WATER – AND YOU CAN BUY THEM ALL ONLINE 24/7

SHOWER ACCESSORIES

194 MIRASHOWERS.CO.UK/EXPERT 195

IT’S SAVING THE ENVIRONMENT, BUT NOT AS YOU KNOW IT!

The days of having to compromise performance when saving water are gone. With our innovative Mira Eco showerhead, your customer saves up to 75%† water, but still enjoys an outstanding shower experience.

By delivering larger water droplets filled with air, Mira Eco creates a great shower experience while radically reducing the amount of water used, so your customers no longer have to choose between that exhilarating Mira feeling and doing their bit for the environment.

And, even better, a Mira Eco showerhead could also save your customers loads of money on their fuel bills, too! As there’s less water to heat it means they use less electricity or gas – perfect, eh?

† When compared with a Mira Logic showerhead at 0.5 bar pressure. Mira Eco is not suitable for electric showers or gravity fed systems under 0.5 bar pressure.

Flow rates (litres per minute) at 0.5 barLogic showerhead Vs Eco showerhead18

16

14

12

10

8

6

4

2

0

The Mira Eco showerhead uses on average 10.2 litres per minute less than the Mira Logic showerhead

Eco showerheadLogic showerhead

start soothe force

11.9

3.7 3.73.5

11.9

17.8

Mira Logic showerhead at 0.5 bar Mira Eco showerhead at 0.5 bar

The spray plate automatically pushes through small pins to prevent limescale build up. It can also be manually pressed for an extra clean if necessary

LIMESCALE?LIMESCALE?WHAT The Mira Everclear showerhead

has got it in for limescale – and with good cause. Limescale contributes to most problems relating to performance. Everclear’s unique design resists limescale build-up with its automatic self-drain function that cleans itself after every use but, for extra cleaning, the integrated push-pins demolish limescale build-up in one easy motion, if needed.

Over 60% of the UK’s population is affected by hard water. It’s this hardness that clogs up all those nozzles with all that annoying limescale, restricting the flow. But, with Mira Everclear, limescale doesn’t have chance to take hold.

The showerhead itself is easy to fit and perfect for mixer showers over 0.2 bar and electrics over 9.0kW.

Mira Everclear showerhead

Ordinary showerhead


SHOWER ACCESSORIES

MIRA SHOWERHEAD RANGE175 mm

20°

85 mm

MIRA RESPONSE 4 SPRAY

Part Number: Chrome/Dark Grey: 2.1605.106, White/Grey: 2.1605.103

Connection: Standard ½" BSP connection

137 mm

193

mm

38°

90 mm

MIRA NECTAR 4 SPRAY

Part Number: Chrome: 2.1703.004, White: 2.1703.002


110 mm74 mm

251

mm 63°

MIRA BEAT 11CM 4 SPRAY



40°

169 mm

199

mm

MIRA LOGIC 4 SPRAY



135 mm

145 mm

230

mm

MIRA 360M 4 SPRAY

Part Number: White/Chrome: 2.1688.001


90 mm27 mm

233

mm 63°

MIRA BEAT SINGLE SPRAY



FOR ANYSHOWER

90 mm65 mm

233

mm 63°

MIRA BEAT 9CM 4 SPRAY



FOR ANYSHOWER

FOR ANYSHOWER

137 mm

193

mm

38°

90 mm

MIRA NECTAR SINGLE SPRAY



FOR ANYSHOWER

FOR ANYSHOWER

FOR ANYSHOWER

FOR ANYSHOWER

FOR ANYSHOWER

40° 199

mm½

″ BSP Male

169 mm

OVER 0.2bar

FOR MIXERSHOWERS

OVER 9kW

FOR ELECTRICSHOWERS

MIRA EVERCLEAR SINGLE SPRAY

Part Number: Chrome: 2.1605.111


90mm

170m

m

175mm

MIRA ECO 3 SPRAY



OVER 0.5bar

FOR MIXERSHOWERS


SHOWER ACCESSORIES

MIRA SHOWERHEAD RANGE

255 mm 73 mm

200

mm

138 mm

with built-in pipework

MIXER SHOWERSover 0.2 bar

MIRA DISCOVERY SINGLE SPRAY (FIXED)


Connection: Standard ½" BSP threaded nipple



MIRA BEAT 200MM OVERHEAD


Connection: Fits any arm with standard ½” connection

Swivel ball joint for flexible, precise adjustment of spray angle



MIRA BEAT WALL-FED ARM


Connection: 15mm compression joint – front of tile installation

Use with Mira Beat 200mm or 250mm overhead



MIRA BEAT CEILING-FED ARM


Connection: 15mm compression joint – front of tile installation

Can be cut to length. Use with Mira Beat 200mm or 250mm overhead

MIRA LOGIC 4 SPRAY (FIXED)


Connection: Compression fit

212 mm MAX20°20°

20°

20°

212 mm MAX20°20°

20°

20°

MIRA ECO 3 SPRAY (FIXED)


Connection: Compression fit

40°

169 mm

199

mm

MIRA LOGIC 4 SPRAY POWER



MIRA RESPONSE 4 SPRAY POWER

Part Number: Chrome/Dark Grey: 2.1605.181, White/Grey: 1.0.411.82.2


175 mm

20°

85 mm

205

5067

41

Ø200mm

83 60

520

970

1063



MIRA BEAT 250MM OVERHEAD


Connection: Fits any arm with standard ½” connection

Swivel ball joint for flexible, precise adjustment of spray angle

1063

545

24610882

50

83 60

970

Ø250mm

FOR POWERSHOWERS

FOR POWERSHOWERS




FOR MIXERSHOWERS


SHOWER ACCESSORIES

337

mm

380

mm

350 mm55 mm

365

mm

440

mm

350 mm 48 mm

ACCESSORIES

MIRA RESPONSE HOSE

Part Number: 1.25m Chrome: 1.1605.167, 1.75m Chrome: 1.1605.168


MIRA RESPONSE SOAP DISH


Connection: Fits onto Mira Response Slidebar and all 18/22 mm slidebars

MIRA LOGIC SOAP DISH

Part Number: Chrome: 2.1605.195, White: 1.450.12.1

Connection: Two screws (wall plugs included)

MIRA LOGIC WALL OUTLET


Connection: Fits all hoses

MIRA 1.5 & 2.0 BAR TWIN-ENDED PUMPS

Domestic twin impeller inlet shower pump used to simultaneously boost hot and cold supplies

Part Number: 2.1745.001 (1.5 bar) or 2.1745.002 (2.0 bar)

Typical flow rate: 12 l/min at 1.0 bar (1.5 bar) or 17 l/min at 1.0 bar (2.0 bar)

Peripheral vortex (regenerative) impeller design

Quiet motor rated for 30 minutes on/30 minutes off.

Integral flow switch for automatic operation

Connection: 4 x 190mm braided flexible hose connectors each featuring push-fit connectors. Integral isolators included on the 2x inlet hoses

MIRA 3.0 BAR BRASS TWIN-ENDED PUMP

Domestic twin impeller inlet shower pump used to simultaneously boost hot and cold supplies

Part Number: 2.1745.003

Typical flow rate: 34 l/min at 1.0 bar


Durable brass bodied construction


Quiet continuously rated motor

Integral flow switch for automatic operation

Connection: 4 x 190mm braided flexible hose connectors each featuring push-fit connectors. Integral isolators included on the 2x inlet hoses

MIRA LOGIC CLAMP BRACKET


Connection: Fits onto Mira Logic Slidebar

MIRA LOGIC SHOWER HEAD HOLDER



MIRA LOGIC HOSE

Part Number: 1.25m Chrome: 2.1605.166, 1.75m Chrome: 2.1605.139


MIRA PREMIUM SHOWER SEAT

Part Number: White/Chrome: 2.1731.001, Chrome/Dark Grey: 2.1731.002

Integrated drainage holes

Folds away when not in use

150 kg weight limit

MIRA SHOWER SEAT

Part Number: White/Chrome: 2.1536.129, White: 2.1536.128

Must only be fitted to solid walls

Folds away when not in use

95.5 kg weight limit


SHOWER ACCESSORIES

250 mm maximum

600

mm

52 mm

332 mm maximum

620

mm

265 mm

344 mm Max.

600

mm

245 mm

620

mm

(Max

imum

)

FOR ANYSHOWER

FOR ANYSHOWER

FOR ANYSHOWER

FOR ANYSHOWER

FOR ANYSHOWER

FOR ANYSHOWER

SLIDE BARS FITTINGS KITS

MIRA NECTAR SLIDE BAR

Part Number: Chrome: 2.1703.008, White/Chrome: 2.1703.007


FOR ANYSHOWER

MIRA EXTRA LONG SLIDE BAR

Part Number: 1.0.413.10.2


MIRA BEAT SLIDE BAR



MIRA LOGIC


Pressure Range: 0.1-5.0 bar


MIRA NECTAR

Part Number: Chrome: 2.1703.006, White/Chrome: 2.1703.005 Chrome 1.75m hose (for BSM) 2.1703.390

Pressure Range: 0.1-5.0 bar | Connection: Standard 1/2” BSP connection

MIRA BEAT

Part Number: Chrome: 2.1703.016, White/Chrome: 2.1703.015 Chrome 1.75m hose (for BSM) 2.1703.391

Pressure Range: 0.1-5.0 bar | Connection: Standard 1/2" BSP connection

MIRA RESPONSE



Connection: Standard 1/2" BSP connection

OVER 0.2bar

FOR MIXERSHOWERS

OVER 9kW

FOR ELECTRICSHOWERS

MIRA FLEX




322mm23mm

100m

m


SHOWER ACCESSORIES

600

mm

75.5 mm

645

mm

FOR ANYSHOWER

MIRA DISCOVERY


Pressure Range: 0.05-5 bar


FITTINGS KITS

600

mm

82 mm150 mm

FOR ANYSHOWER

MIRA 360 CLASSIC

Part Number: White/Chrome: 1.1688.005



OVER 0.2bar

FOR MIXERSHOWERS

OVER 9kW

FOR ELECTRICSHOWERS

MIRA EVERCLEAR



Connection: Standard ½” BSP connection

600

mm

150 mm

40° 199

mm½

″ BSP Male

169 mm

210 MIRASHOWERS.CO.UK/EXPERT 211210 MIRASHOWERS.CO.UK 211

SHOWER ACCESSORIES

MIX AND MATCH BAR VALVES AND FITTINGS

SHOWER ACCESSORIES

SOMETIMES YOUR CUSTOMER MAY ONLY WANT TO REPLACE THEIR MIXER VALVE, OR UPDATE THEIR SHOWER FITTINGS. HERE AT MIRA, WE’VE GOT A WIDE RANGE OF VALVE ONLY OPTIONS WHICH YOU CAN MATCH WITH FITTINGS, CHOSEN FROM PAGES 207-209.

MIRA CODA (EXPOSED VALVE)

Thermostatic temperature control

Separate flow and temperature controls

Maximum temperature stop

MIRA GEM 88 (EXPOSED VALVE)

Manual temperature control


Anti-limescale technology

MIRA DISCOVERY DUAL (EXPOSED VALVE)




MIRA SILVER (EXPOSED VALVE)


One single control for flow and temperature

Accepts falling, rising and rear supplies

MIRA DISCOVERY CONCENTRIC (EXPOSED VALVE)




MIRA COMBIFORCE 415 (EXPOSED VALVE)

Pressure balancing technology

One single control for flow and temperature


MIRA GEM 88 (BUILT-IN VALVE)

Manual temperature control


Anti-limescale technology

MIRA DISCOVERY DUAL (BUILT-IN VALVE)




MIRA SILVER (BUILT-IN VALVE)


One control for flow and temperature


MIRA DISCOVERY CONCENTRIC (BUILT-IN VALVE)




MIRA EXCEL (BUILT-IN VALVE)




MIRA EXCEL (EXPOSED VALVE)




MIRA 2-WAY BUILT-IN DIVERTER

Two way diverter valve

Divert between overhead and handset

MIRA DISCOVERY & DIVERTER VALVE

Two way diverter valve

Divert between overhead and handset

Magni-Flo™ gives up to 3x more flow | Thermostatic

shower accessories shower accessories … · shower accessories mira eco showerhead 196 ... even...

Documents