Code Repair TypeS-001 General Shotgun Repair/Clean Inspect $75.00 / HrS-002 Shotgun Machining (Drilling, Tapping, Etc.) $110.00 / HrS-003 Shotgun Recoil Pad Install (Does not include custom length)

* Pad & Spacers Sold separatelyS-004 Shotgun Trigger Work (Semi and Pump Only) - Reduce Pull $140.00S-005 Shotgun Center Sight Install ( Mid-Rib) $30.00S-006 Shotgun Front Sight Install

(Beads, Bradley Style, Fiber Optic Style)S-007 Shotgun Inertia to Mechanical Trigger Conversion

(Over/Under Only)S-008 Shotgun Adjustable Comb Install

S-009 Shotgun Fixed Choke Opening - 12 & 20 Gauge Only (Non Chrome lined Barrels Only)

S-011 Shotgun Complete Rebuild Action. (Over/Under and SXS) * Multi Barrel Sets ($225.00 Per each additional Set of Barrels)

S-012 Shotgun Resolder Top Vent Rib * Side Ribs of Over Under and Bottom Rib of SXS ($145.00 Per Rib)

S-013 Shotgun Drill and Tap Scope Mount Holes (Up to 4 holes) * Each Additional Hole ($25.00 Per Hole)

S-014 Shotgun Graco Gra-Coil Installation (Gracoil & Recoil Pad Sold Separately)

S-015 Shotgun Graco Gra-Coil w/Adjustable LOP (Gracoil & Recoil Pad Sold Separately)

S-016 Shotgun Graco Adjustable Pad System (Graco System & Pad Sold Separately)

S-017 Shotgun Jeweling (Over/Under, SXS Barrel Mono Block Areas, Ejectors Etc.)

S-018 Shotgun Stock Fitting $110.00 / HrS-019 Shotgun Hydraulic Barrel Dent Removal - 12 & 20 Gauge ONLY $75.00 / HrS-067 Shotgun Install Sling Eyelet (Stock or Forearm) $35.00 / HoleS-VIS Shotgun VIS Package (Very Important Shotgun)

* Most Semi-Auto Shotguns

Code Salt Blue (Traditional Bluing)S-021 Shotgun Gloss Salt Bluing Semi Auto/Pump (Receiver Only) $225.00S-022 Shotgun Gloss Salt Bluing Semi Auto/Pump (Barrel Only) $125.00S-023 Shotgun Gloss Salt Bluing Semi Auto/Pump (Complete Firearm) $350.00

S-024 Shotgun Gloss Salt Bluing Over/Under,SXS and Other Hinge Guns (Receiver Only)

S-025 Shotgun Gloss Salt Bluing Over/Under,SXS and Other Hinge Guns (Barrels Only)

S-026 Shotgun Gloss Salt Bluing Over/Under,SXS and Other Hinge Guns (Complete Firearm)

$105.00

$210.00

$210.00

$375.00

$210.00

$275.00

$245.00

$520.00

Continued On Next Page

$340.00

$75.00 / Hr

Metal RefinishBluing

Price

$225.00

* For certain models such as Winchester M-12,42,97 and other similar

models, their will be an additional charge per complete firearm.(POR By Model)

$230.00 / Hole

Shotgun Gunsmithing PricelistMechanical Repairs

Price

$30.00

$350.00 and Up(POR By Model)

$95.00

$110.00

S-027 Shotgun Matte Salt Bluing Semi Auto/Pump (Receiver Only) $225.00

S-028 Shotgun Matte Salt Bluing Semi Auto/Pump (Barrel Only) $125.00

S-029 Shotgun Matte Salt Bluing Semi Auto/Pump (Complete Firearm) $350.00

S-030 Shotgun Matte Salt Bluing Over/Under,SXS and Other Hinge Guns (Receiver Only)

S-031 Shotgun Matte Salt Bluing Over/Under,SXS and Other Hinge Guns (Barrels Only)

S-032 Shotgun Matte Salt Bluing Over/Under,SXS and Other Hinge Guns (Complete Firearm)

Code Rust Blue (Belgian Bluing)S-033 Shotgun Rust Blue Over/Under, SXS (Barrel Only) $385.00

S-034 Shotgun Rust Blue Over/Under, SXS (Complete Firearm) $630.00

Code French GrayingS-035 Shotgun French Graying Over/Under,SXS (Receiver Only) $425.00

S-036 Shotgun French Graying Over/Under,SXS (Complete Firearm) $750.00

Code Case ColorS-020 Shotgun Case Color

Code Gold PlatingS-010 Shotgun Gold Plate Trigger $55.00

Receiver Only:  "Receiver Only" refers to all metal components except barrel. ▪ Most bluing fades over

time with or without use of the firearm. We recommend having both the receiver and the barrel reblued at

the same time.

Rust, Pitting, and Neglect:  Firearms that have heavy rust, pitting, or those showing signs of neglect are

subject to additional fees.

* For certain models such as Winchester M-12,42,97 and other similar

models, their will be an additional charge per complete firearm.(POR By Model)

* Firearms such as Winchester 21 and High Grade Browning Superposed

models (Midas Grade, Etc.) will have an upcharge of $150.00 Per Complete

Firearm for polishing, jeweling, etc.* Any Over/Under or SXS Shotgun that Soft Solder was used will require Rust Blue. Examples: Browning

Superposed, Winchester 101, Beretta SO Series, Winchester 21 and Others.

Engraving:  ▪ Firearms with heavy pitting, rust, and neglect may require additional polishing that results in

lost engraving. We do offer touch-up and re-engraving of factory patterns for the purpose of restoration. All

engraving quotes will be given only upon visual inspection of the firearm ▪ Engraving quotes will not be

delivered through e-mail or over the phone without prior inspection of an MGW gunsmith. ▪ Please do not

send images of your engraving to us through e-mail, UPS, Fed-Ex, or The U.S.P.S, these images will be

deleted or discarded. ▪ A gunsmith at our facility must have the firearm in his hand for an accurate quote to

take place.

Triggers:  Reblue, French Gray and any other metal refinishing does not include re-gold of trigger. For

trigger re-gold prices please see other shop services below.

Continued On Next Page

Price$850 and Up

$245.00

$275.00

$520.00

(POR By Model)

Price

Mechanical Repair, Bluing, Graying and Refinishing Notes

Price

Price

* Receiver Only refers to all of the Grayed Components of the Firearm.

Metal Refinish (Continued)

Code Cerakote

S-055 Shotgun Cerakote Semi-Auto/Pump - Assembly/Disassembly $70.00

S-056 Shotgun Cerakote Semi-Auto/Pump (Stock & Forearm) $75.00

S-057 Shotgun Cerakote Semi-Auto/Pump (Receiver Only) $75.00S-058 Shotgun Cerakote Semi-Auto/Pump (Barrel Only) $75.00S-059 Shotgun Cerakote Semi-Auto/Pump (Complete Firearm) $295.00S-060 Shotgun Cerakote Semi-Auto/Pump Slickcote (Bolt Only) $45.00S-061 Shotgun Cerakote Over/Under, SXS - Assembly/Disassembly $130.00S-062 Shotgun Cerakote Over/Under, SXS (Stock & Forearm) $75.00S-063 Shotgun Cerakote Over/Under, SXS (Receiver Only) $75.00S-064 Shotgun Cerakote Over/Under, SXS (Barrel Only) $110.00S-065 Shotgun Cerakote Over/Under, SXS (Complete Firearm) $385.00

* Extra Polish charges may apply if the product has rust or pitting.

* Cerakote will not fill pitting or scratches in the product.

Code Repair TypeS-037 Shotgun High Gloss Finish Semi-Auto/Pump ((Stock Only)) $190.00S-038 Shotgun High Gloss Finish Semi-Auto/Pump (Forearm Only) $165.00S-039 Shotgun High Gloss Finish Semi-Auto/Pump (Complete Firearm) $355.00S-040 Shotgun High Gloss Finish Over/Under, SXS (Stock Only) $250.00S-041 Shotgun High Gloss Finish Over/Under, SXS (Forearm Only) $175.00S-042 Shotgun High Gloss Finish Over/Under, SXS (Complete Firearm) $425.00S-043 Shotgun Satin Finish Semi-Auto/Pump (Stock Only) $200.00S-044 Shotgun Satin Finish Semi-Auto/Pump (Forearm Only) $175.00S-045 Shotgun Satin Finish Semi-Auto/Pump (Complete Firearm) $375.00S-046 Shotgun Satin Finish Over/Under, SXS (Stock Only) $260.00S-047 Shotgun Satin Finish Over/Under, SXS (Forearm Only) $185.00S-048 Shotgun Satin Finish Over/Under, SXS (Complete Firearm) $445.00S-049 Shotgun Oil Finish Semi-Auto/Pump (Stock Only) $245.00S-050 Shotgun Oil Finish Semi-Auto/Pump (Forearm Only) $210.00S-051 Shotgun Oil Finish Semi-Auto/Pump (Complete Firearm) $455.00S-052 Shotgun Oil Finish Over/Under, SXS (Stock Only) $280.00S-053 Shotgun Oil Finish Over/Under, SXS (Forearm Only) $215.00S-054 Shotgun Oil Finish Over/Under, SXS (Complete Firearm) $495.00

* Any loose parts shipped to Midwest Gun Works for Cerakoting must be accompanied with an inventory

list.

Cerakote Finishing

Price

Cerakote Finishing Notes

* Midwest Gun Works is not responsible for the function of your firearm if customer elects to assemble or

disassemble the firearm themselves.

Checkering:  Wood refinishing does not include re-cutting of the checkering. ▪ No checkering will be lost

during the refinishing process.

Stock Repairs:  Stocks and forearms requiring repairs due to chips, cracks, or neglect are subject to

additional fees. ▪ Repairs are billed on an hourly basis and the current charge is $70.00/Hour

Side Plates, Gold Ovals, Wood Carving, and Skip Line Checkering:  Any stock or forearm featuring

Side Plates, Gold Ovals, Wood Carving, Skip Line Checkering, and some Pressed Checkering styles may

be subject to additional fees.

* Midwest Gun Works will not Cerakote the internal moving parts of your firearm.  The firearm was designed with

specific tolerances for fit and function, and may not operate properly if Cerakote is applied.

Wood Refinish

Price

Wood Refinishing Notes