shop supplies - neia nfcneiafasteners.com/catalog/shopsupplies.pdfball joint assemblies 41 ball...

Shop Supplies

www.neiafasteners.com E-Mail: [email protected]

1-800-782-6342

8530 “K” Street Omaha, NE 68127

Phone: (402) 592-4988 Fax: (402) 592-9271

905 East Kansas Ave.

Arkansas City, KS 67005 Phone: (620) 442-7526

Fax: (620) 442-7583

www.nfc-usa.com E-Mail: [email protected]

1-800-786-4658

1817 Jasper Street Kansas City, MO 64116 Phone: (816) 221-8885

Fax: (816) 472-5555

2335 B-104 E. Chestnut Expwy. Springfield, MO 65802 Phone: (417) 865-6246

Fax: (417) 865-0596

Table of Contents Categorized Listing

SHOP SUPPLIES 1 ABRASIVES 58 Bristle Discs 66 Chop Saw Wheels 60 Clean & Strip Discs 64 Cut Off Wheels & Mandrel 58 Emery Cloth 63 Fibre Discs 64 Flap Discs 61 Flap Discs- Mini 62 Flap Wheels 62 Grinding Wheels 58 Hand Pads 67 Roloc Abrasive Discs 64 Silicon Carbide Sandscreen 62 Steel Wool 67 Surface Cond. Discs & Holders- 3M 65 Surface Cond. Discs & Holders 66 AUTO ACCESSORIES 70 Application Squeegee 70 Floor Mats 70 Seat Covers 70 BALL JOINTS 42 Ball Joint Assembly 42 Male & Female Ball Joints 43 Male & Female Ball Joints w/ Stud 44 CAPS & PLUGS 50 Plastic Plug Button 51 Steel Plug Button 51 Tapered Caps & Plugs 50 Tapered Caps & Plugs- Thick Flange 51 CARBIDE BURS 16 CHAIN HARDWARE 39 Clevis Grab Hook 39 Cold Shut Link 39 Quick Link 39 Ratchet Load Binders 40 Ratchet Tie Down Straps 40 Rope Ratchet 40 Screw Pin Anchor Shackle 39 Spring Hook 39 Turnbuckle 40

DRILL BITS 1 1/2” Shank S&D Series 10 1/2” Shank S&D Nitro Series 10 3/8” Shank Nitro Series 11 Aircraft Extension Series 13 BG135 Series 2 Brute Series 4 Cobalt Series 5 Countersinks 15 Cryo 135 Series 1 Double End Series 12 Empty Indexes 23 Jobber Length Series 6 Left Hand Series 9 Letter Size Series 7 Magnum Series 3 Masonry Carbide Tip Series 13 Metric Jobber Brute Series 12 Reamer Brute Series 15 Screw Machine Length Series 12 Spade Bits 13 Vari-Bits 14 Wire Gauge Series 8 EYE BOLTS 36 Drop Forged Galvanized 37 Machinery 37 Turned Eye 36 GLOVES 76 Brown Jersey 76 Cut Resistant 80 Double Sided PVC 76 Foam Dipped Nitrile 80 Latex Coated 80 Latex Disposable 81 Leather Drivers 78 Leather Drivers- Insulated 78 Leather Palm 77 Mechanics 79 Nitrile Disposable 81 Polar Fleece Winter 77 Smitty Palm Coated 76 Welders 77 HEX DIES 22


HEX KEY WRENCHES 47 Long Arm 47 Metric 47 Sets 48 Short Arm 47 T-Handle 47 HOLE SAWS & ACCESSORIES 24 Hole Saws 24 Hole Saw Accessories 24 Hole Saw Kits 25 KEYSERTS 32 O-RINGS 33 A/C 35 Fractional 33 Metric 34 PAINT ACCESSORIES & BRUSHES 55 Acid Brush 55 Chip Brush 55 Paint Roller Covers 55 Paint Roller Handle 55 Paint Tray 55 Parts Cleaning Brush 55 Spray Bottles 55 PUTTY KNIVES & SCRAPERS 54 RAZOR BLADES & ACCESSORIES 52 Auto-Lock Utility Knife & Blades 53 Carton Cutter 52 Razor Blade Scrapers 52 Single Edge Razor Blades 54 Utility Blades 53 Utility Knives 52 SAFETY 72 Earplugs 73 Eye Wash 74 Hi-Viz Apparel 75 Lens Cleaning 74 Respirators 73 Safety Glasses 72 Safety Walk Tape 73

SAW BLADES & ACCESSORIES 26 Air Saw Blades 27 Bandsaw Blades 26 Circular Saw Blade 26 Compact Frame 26 Hacksaw Blades 26 Hacksaw Frames 26 Jig Saw Blades 27 Reciprocating Saw Blades 28 Tri-Fold Saw 26 SCREW EXTRACTORS 17 SNAPS 38 SPRINGS 45 Carburetor Return 46 Compression 45 Extension 46 TAPE 68 Automotive Attachment 70 Duct 68 Electrical 71 Filament Strapping 69 Glass Cloth 71 Masking 68 Moisture Sealant 71 Packing 69 Packing Tape Dispenser 69 PTFE Sealant 68 Splicing 71 TAPS & ACCESSORIES 18 Bottoming 20 Pipe 21 Plug 19 Spiral Point 21 Taper 18 Tap & Drill Set 21 Tap Wrench 21 THREAD REPAIR INSERTS 29 Individual Kits 30 Inserts 29 Master Kits 31 Spark Plug Kits 31


TOWELS 82

Absorbent Pads 85 Bucket Wipers 83 Center-Pull 85 General Purpose Wipers 83 Jumbo Roll Dispensers 84 Magic Scrubs 82 Scrubs 82 Shop Towels 83 Sun Skeeter Wipes 82 Waterweave HD Wipers 84 U-BOLTS 36 UTILITY 49 Hanger Strapping 49 Mechanics Wire 49 Rope 49 Rubber Tarp Straps 49 S-Hooks 49 WIRE BRUSHES 56 Circular 57 Cup 56 Hand 56 Toothbrushes 56 Wire End 57 Wire Wheel 57 WIRE ROPE & ACCESSORIES 41 Coated Galvanized Cable 41 Combo Swager 41 Swage Sleeves 41 Wire Rope Clips 41 Wire Rope Thimbles 41

"

"S" Hook 48

11/2" Shank S & D Nitro Series 91/2" Shank S & D Series 91/2" Shank S & D Series Drill Set 912" Aircraft Extension Series 1213-Point Replacement Blade 52

33/8" Shank Mechanics Length Nitro Series 103/8" Shank Mechanics Length Nitro Series Drill Set 103/8" Shank Nitro Series 10

66" Aircraft Extension Series 12

88-Point Replacement Blade 52

AAbrasives 57-66Absorbent Pads- Gen Purpose 83Absorbent Pads- Oil Only 83Air Conditioning O-Rings 34Air Saw Blades 26Aluminum Cut Ball Shape 15Aluminum Cut Cylindrical 15Aluminum Cut Cylindrical Ball Nose 15Aluminum Cut Oval Shape 15Aluminum Cut Tree Radius 15Aluminum Swage Sleeves 40Application Squeegee 69AR3 Safety Glasses 71Arbor Adapter 23Autoloading Utility Knife 51Auto-Lock 13-Point Utility Knife 52Auto-Lock 8-Point Utility Knife 52Automotive Attachment Tape- 3M 69

BBall End L-Wrench Sets 47Ball Joint Assemblies 41Ball Joints 41-43Ball Shape 15Bench Grinding Wheels 57Bench Grinding Wheels- Green Silicone 57BG135 Series 1BG135 Series Drill Sets 1Bi-Metal 24Bi-Metal Band Saw Blades 25Bi-Metal Hacksaw Blades 25Bi-Metal Hole Saws 23Black Nitrile Disposable Gloves 79Bottoming Taps HSS 19Bottoming Taps Metric HSS 19Brown Jersey Gloves 74Brute Series 3Brute Series Drill Sets 3Bucket Wipers 81Bucket Wipers-Refill 81Buna-N 1/16" Thickness 32Buna-N 1/8" Thickness 32Buna-N 2.5MM Thickness 33Buna-N 2MM Thickness 33

Buna-N 3/16" Thickness 32Buna-N 3/32" Thickness 32Buna-N 3MM Thickness 33Buna-N 4MM Thickness 33Buna-N O-Ring Kit 32

Carbide Burs 1/4" Shank 15Carburetor Return Spring 45Carton Cutter 51Center-Pull Towels 83Center-Pull Towels- Scott 83Chain Hardware 38-39Chip Brush 54Chisel Scraper & Joint Knife 53Chop Saw Wheels 59Chop Saw Wheels- Hi-Performance 59Circular Saw Blade 25Clevis Grab Hooks 38Cobalt Drill Sets 4Cobalt Series 4Cold Shut Links 38Combined Drill & Countersink 14Combo Swagger 40Compact Hand Saw 25Compression Springs 44Cone Shape 15Countersinks- 3 Flute 14Crimped Wire Circular Brush 56Crimped Wire Cup Brushes 55Crimped Wire End Brush 56Crimped Wire Flared Brushes 56Cushion Grip T-Handle 46Cushion Grip T-Handle Sets 47Cut Off Wheel Mandrel 58Cut Off Wheels Type 1 58Cut Off Wheels Type 1- 3M 58Cut Off Wheels Type 1- Hi-Performance 58Cut Off Wheels Type 1- Performance 58Cut Off Wheels Type 27 58Cut-Resistant Gloves 78Cutting Tools 12, 14Cylindrical 15Cylindrical Ball Nose 15

Disc Holders Type R 65Double End Series 11Double Sided PVC Dotted Gloves 74Drill Bits 1-12Drop Forged Galvanized Eye Bolts 36Duct Tape 67

Electrical Tape 70Electrical Tape- 7 Mil 70Electrical Tape- Premium 70Emery Cloth- Economy 62Emery Cloth- Premium 62Emery Cloth- Wright Pack 62Empty Cabinets & Indexes 22

Table of ContentsAlphabetized Listing

CCaps & Plugs 49-50

DDetour 32 Earplugs 72

EElectrical Moisture Sealant Tape 70

E

Empty Metal Drill Cabinet 22Empty Metal Drill Index 22Empty Round Plastic Index 22Extension Springs 45Extensions 23Eye Wash 73Eye Wash Station 73Eye x Eye Forged Turnbuckle 39Eyebolts 36

FFemale Ball Joints 42Female Ball Joints with Stud 43Fibre Disc- Green Corps 63Filament Strapping Tape 68Flap Discs- 5/8-11 Arbor 60Flap Discs- High Density 60Flap Discs- Hi-Performance 60Flap Discs- Mini Performance 61Flap Discs- Performance 60Flap Wheels 61Floor Mats 69Foam Dipped Nitrile Gloves 78Fold-Up Razor Scraper 51For Hydraulic Fittings 49For NPT Threaded Pipe 49For Unthreaded Pipe 49Fractional Inserts 28Fractional Kits 29

GGeneral Purpose Wipers 81Glass Cloth Electrical Tape 70Gloves 74-79Goatskin Mechanics Gloves 77GorillaGrip Fold Up Hex Key Sets 47Grinding Wheel Type 27 57Grinding Wheel Type 27- Aluminum 57Grinding Wheel Type 27- Hi-Performance 57

HHand Pads Gray- 3M 66Hand Pads Green 66Hand Pads Maroon- 3M 66Hanger Strapping- Galvanized 48Heavy Duty Ratchet Tie Down Strap 39Heavy Duty Utility Knife 51Hex Dies 21Hex Key Sets 47Hex Key Wrenches 46Hex Rethreading Dies- Fractional 21Hex Rethreading Dies- Metric 21Hex Rethreading Dies- Pipe 21High Tension Hacksaw Frame 25Hi-Viz Bomber Jacket 73Hole Saw Arbors 23Hole Saw Kits 24Hole Saw Pilot Bits 23Hole Saws & Accessories 23

JJelli Snug Earplugs 72Jig Saw Blades- T-Shank 26

Jig Saw Blades- Universal Shank 26Jobber Length Drill Sets 5Jobber Length Series 5Journey Safety Glasses 71Jumbo Roll Dispenser 82

Knot Wire Cup Brushes 55Knot Wire End Brush 56

Latex Coated Lined Gloves- Hi Viz 78Latex Disposable Gloves 79Leather Drivers Glove- Thinsulate Lined 76Leather Drivers Gloves- Keystone Thumb 76Leather Drivers Gloves- Straight Thumb 76Leather Palm Gloves 75Leather Palm Gloves- HD 75Left Hand Drill Set 8Left Hand Series 8Lenox Gold Utility Blades 52Lens Cleaning Station 73Lens Cleaning Towelettes 73Letter Size Drill Set 6Letter Size Series 6Linerless Rubber Splicing Tape 70Liquid Electrical Tape 70Long Arm 46L-Wrench Sets 47

Magnum Series 2Magnum Series Drill Sets 2Male Ball Joints 42Male Ball Joints with Stud 43Masking Tape- Gen Purpose 67Masking Tape Green- 3M 67Masonry Carbide Tip Series 12Master Repair Kit - Coarse Thread 30Master Repair Kit - Fine Thread 30Master Repair Kit - Metric Thread 30Mechanics Wire 48Metal Fold Up Hex Key Sets 47Metric 46Metric Buna-N O-Ring Kit 33Metric Inserts 28Metric Jobber Brute Series 11Metric Kits 29Metric Nitrile Air Conditioning O-Rings 34Metric O-Rings 33Mirage Safety Glasses 71

Nickel Plated Steel Snap 37Nickel Plated Swivel Eye Snap 37Nitrile Air Conditioning O-Ring Assortment 34Nitrile Air Conditioning O-Rings 34

Orange Nitrile Disposable Gloves- HD 79


KKeyserts 31

LLatex Coated Gloves 78

MMagic Scrubs Cleaning Wipes 80

NNickel Plated Double Eye Snap 37

OOpen Swivel Eye Snap 37

O

O-Rings 32Oval Shape 15

PPacking Tape Clear 68Packing Tape Clear- 3M 68Packing Tape Dispenser 68Paint Accessories & Brushes 54Paint Roller Cover 54Paint Roller Handle 54Paint Tray 54Particulate Respirators- 3M 72Parts Cleaning Brush 54Plastic Plug Buttons- Recessed 50Plug Taps HSS 18Plug Taps Metric HSS 18Pointed Tree Shape 15Polar Fleece Winter Work Glove 75Premium Split Cowhide Welders Gloves 75ProHold Balldriver L-Wrench Sets 47PTFE Thread Sealant Tape 67PTFE Thread Sealant Tape- 3M 67Putty & Joint Knives 53

QQuick Links 38

RRad-Sequel Bi-Focal Safety Glasses 71Rad-Sequel Safety Glasses 71Ratchet Loadbinders 39Ratchet Tie Down Strap- S Hooks 39Razor Blade Scraper 51Razor Blades & Accessories 51-52Razor Blades & Scrapers 53Reamer Brute Series 14Reamer Brute Series Set 14Reciprocating Saw Blades- All Purpose 27Reciprocating Saw Blades- Demolition 27Resistor 32 Earplugs 72Roloc Bristle Discs 65Roloc Disc Holders- 3M 64Roloc Discs- Alum Oxide 63Roloc Discs- Clean & Strip 63Roloc Discs- Green Corps 63Rope Ratchets 39Round Tree Shape 15RPG Safety Glasses 71Rubber Tarp Straps 48

SSafety 71-73Safety Walk Tape- 3M 72Saw Blades & Tools 25Saws 26-27Screw Extractor / LH Drill Set 16Screw Extractor Set 16Screw Extractors 16Screw Machine Length Series 11Screw Pin Anchor Shackle 38Scrubs Hand Cleaning Towels 80Seat Covers- HD 69SHOP SUPPLIES 1-83

Shop Towels- Jumbo Roll 81Shop Towels-6 Pack 81Short Arm 46Shouldered Machinery Eye Bolts 36Silicon Carbide Sandscreen 61Single Edge Razor Blade-Plastic 53Single Edge Razor Blade-Steel 53Smitty Palm Coated Glove 74Snaps 37Solid Bronze Open Eye Snap 37Spade Bit 12Spark Plug Repair Kit 30Spiral Point Taps 20Spray Bottles 54Spring Hooks 38Springs 44-45Stanley 1991 Utility Blades 52Steel Plug Buttons- Nickel Plated 50Steel Wool 66Step Drills 13Stubby Ball End L-Wrench Sets 47Sun Skeeter Insect Repellent + Sunscreen Wipes 80Surface Conditioning Discs Type R 65Surface Conditioning Discs Type R- 3M 64Surface Conditioning Discs Type R- HD 65Surface Conditioning Discs Velcro- 3M 64Swivel Eye 37

Tap Wrench T-Handle 20Tape 67-68Tape & Auto Accessories 69Taper Pipe Taps Carbon Steel 20Taper Radius 15Taper Taps HSS 17Taper Taps Metric HSS 17Tapered Caps and Plugs- Thick Flange 50Tapered Polyethylene Caps and Plugs 49Tapered Polyethylene Round Caps 49Tapered Polyethylene Round Plugs 49Taps 17-19Taps & Accessories 20Thinwall Keyserts- Fractional 31Thinwall Keyserts- Metric 31Thread Repair Inserts 28Thread Repair Kits 29-30Tin Handle Acid Brush 54Top Grain & Goatskin Mechanics Gloves 77Top Grain/Split Cowhide Drivers Gloves 76Towels 80-83Tri-Fold Saw 25Turned Eye Bolts 35

U-Bolts & Eye Bolts 35Utility 48Utility Blades 52Utility Knife 51

Vari-Bit Step Drills 13


TTap & Drill Set 18pc 20

UU-Bolts 35

VVari-Bit Kit 13

V

Velcro Disc Holders- 3M 64Vinyl Coated Galvanized Cable 40

WWaterweave HD Wipers 82Waterweave HD Wipers- Jumbo Roll 82Wire Brushes 55-56Wire Gauge Drill Set 7Wire Gauge Series 7Wire Hand Brushes 55Wire Rope & Accessories 40Wire Rope Clips 40Wire Rope Thimbles 40Wire Toothbrushes 55Wire Wheel Brushes 56

YYellow Polypropylene Rope 48


Decimal Drill Size Decimal Drill Size Decimal Drill Size Decimal Drill Size Decimal Drill Size.0135 80 .0860 44 .1935 10 .3543 9.00mm .6890 17.50mm.0145 79 .0890 43 .1960 9 .3580 T .7031 45/64.0156 1/64 .0935 42 .1969 5.00mm .3594 23/64 .7087 18.00mm.0160 78 .0938 3/32 .1990 8 .3680 U .7188 23/32.0180 77 .0960 41 .2010 7 .3740 9.50mm .7283 18.50mm.0197 .50mm .0980 40 .2031 13/64 .3750 3/8 .7344 47/64.0200 76 .0984 2.50mm .2040 6 .3770 V .7480 19.00mm.0210 75 .0995 39 .2055 5 .3860 W .7500 3/4.0225 74 .1015 38 .2090 4 .3906 25/64 .7656 49/64.0240 73 .1040 37 .2130 3 .3937 10.00mm .7677 19.50mm.0250 72 .1065 36 .2165 5.50mm .3970 X .7812 25/32.0260 71 .1094 7/64 .2188 7/32 .4040 Y .7874 20.00mm.0280 70 .1100 35 .2210 2 .4062 13/32 .7969 51/64.0292 69 .1110 34 .2280 1 .4130 Z .8071 20.50mm.0310 68 .1130 33 .2340 A .4134 10.50mm .8125 13/16.0312 1/32 .1160 32 .2344 15/64 .4219 27/64 .8268 21.00mm.0320 67 .1181 3.00mm .2362 6.00mm .4331 11.00mm .8281 53/64.0330 66 .1200 31 .2380 B .4375 7/16 .8438 27/32.0350 65 .1250 1/8 .2420 C .4528 11.50mm .8465 21.50mm.0360 64 .1285 30 .2460 D .4531 29/64 .8594 55/64.0370 63 .1360 29 .2500 1/4 (E) .4688 15/32 .8661 22.00mm.0380 62 .1378 3.50mm .2559 6.50mm .4724 12.00mm .8750 7/8.0390 61 .1405 28 .2570 F 4844 31/64 .8858 22.50mm.0394 1.00mm .1406 9/64 .2610 G .4921 12.50mm .8906 57/64.0400 60 .1440 27 .2656 17/64 .5000 1/2 .9055 23.00mm.0410 59 .1470 26 .2660 H .5118 13.00mm .9062 29/32.0420 58 .1495 25 .2720 I .5156 33/64 .9219 59/64.0430 57 .1520 24 .2756 7.00mm .5312 17/32 .9252 23.50mm.0465 56 .1540 23 .2770 J .5315 13.50mm .9375 15/16.0469 3/64 .1562 5/32 .2810 K .5469 35/64 .9449 24.00mm.0520 55 .1570 22 .2812 9/32 .5512 14.00mm .9531 61/64.0550 54 .1575 4.00mm .2900 L .5625 9/16 .9646 24.50mm.0591 1.50mm .1590 21 .2950 M .5709 14.50mm .9688 31/32.0595 53 .1610 20 .2953 7.50mm .5781 37/64 .9843 25.00mm.0625 1/16 .1660 19 .2969 19/64 .5906 15.00mm .9844 63/64.0635 52 .1695 18 .3020 N .5938 19/32 1.000 1.0669 1.70mm .1719 11/64 .3125 5/16 .6094 39/64.0670 51 .1730 17 .3150 8.00mm .6102 15.50mm.0700 50 .1770 16 .3160 O .6250 5/8.0730 49 .1772 4.50mm .3230 P .6299 16.00mm.0760 48 .1800 15 .3281 21/64 .6406 41/64.0781 5/64 .1820 14 .3320 Q .6496 16.50mm.0785 47 .1850 13 .3346 8.50mm .6562 21/32.0787 2.00mm .1875 3/16 .3390 R .6693 17.00mm.0810 46 .1890 12 .3438 11/32 .6719 43/64.0820 45 .1910 11 .3480 S .6875 11/16

neiafasteners.com nfc-usa.com

Decimal Equivalents/Drill Sizes

Fractional, Wire, Letter, Metric

Tap Size Drill Size % of Thread Tap Size Drill Size % of Thread Tap Size NPT Drill NPS Drill

0-80 3/64 71 1/4-28 3 70 1/16-27 C 1/4

1.6x.35 1.25mm 69 5/16-18 F 72 1/8-27 Q Q

1-64 53 59 5/16-24 I 70 1/4-18 7/16 7/16

2.0x.40 52 66 8.0x1.25 6.7mm 74 3/8-18 9/16 37/64

1-72 53 67 3/8-16 5/16 74 1/2-14 45/64 45/64

2-56 51 74 3/8-24 Q 75 3/4-14 29/32 59/64

2-64 50 70 10.0x1.5 8.5mm 71 1-111/2 1-9/64 1-5/32

2.5x.45 2.05mm 69 7/16-14 U 75 1-1/4-111/2 1-31/64 1-1/2

3-48 5/64 70 7/16-20 25/64 68 1-1/2-111/2 1-23/32 1-47/64

3-56 46 69 12.0x1.75 13/32 72 2-111/2 2-3/16 2-13/64

4-40 44 74 1/2-13 27/64 75 2-1/2-8 2-5/8 2-21/32

4-48 42 61 1/2-20 29/64 67

3.0x.5 40 70 14.0x2 15/32 76

5-40 39 71 9/16-12 31/64 69

5-44 38 72 9/16-18 33/64 60

3.5x.6 33 72 5/8-11 17/32 76

6-32 36 72 5/8-18 37/64 60

6-40 33 69 16.0x2 35/64 76

4.0x.7 3.3mm 69 3/4-10 21/32 69

8-32 29 62 3/4-16 11/16 72

8-36 29 70 20.0x2.5 11/16 74

10-24 25 69 7/8-9 49/64 73

10-32 21 68 7/8-14 13/16 62

5.0x.8 4.2mm 69 24.0x3 53/64 72

12-24 17 73 1-8 7/8 74

12-28 15 70 1-12 59/64 65

6.0x1 9 71 1-14 15/16 62

1/4-20 7 70


Tap Chart

Tap Drill Sizes Pipe Tap Drill Sizes

Taps are used to create internal threads in a pre-drilled hole so that a

bolt can be used to fasten two or more pieces of metal together

What is the definition of a tap?

A rotary cutting tool having cutting teeth and having helical or straight flutes

for the passage of chips and the admission of cutting fluid.

A tap products a thread in an existing hole

How do taps cut?

(A) the chamfer and first full thread do all the cutting. The cut material is known as chips.

(B) the cut chips are stored in the flutes. (C) chips are forced out through the flutes.

(D) The shank of a tap fits into the tap holder. The square at the end of the shank drives and rotates

the tap- the flats being the surfaces of the driving square.

(E) "Necked down" taps provide better lubrication and make tapping easier.

Carbon steel or High-speed steel taps?

Carbon steel is softer, less durable, and less expensive than high-speed steel, and is

generally used for "cleaning-up" and re-dressing damaged, bruised or rusty threads.

High-speed steel taps are significantly harder (62-64 Rockwell C) and are used to create

new threads.

What is the difference between Spiral point taps and Hand taps?

Spiral point taps are mainly used for "through-holes", meaning the hole produced What are pipe taps and how do they work

has been drilled completely through the work-piece. The advantage is that the spiral differently from hand taps?

point directs the chips forward, away from the newly cut threads. Higher tapping Pipe taps are most often used to create threads

speeds result, which increase productivity, as well as higher quality threads. inside of pipes, pipe fittings and tubes. The

thread from American Standard Pipe Thread (NPT)

is tapered 3/4" per foot, as taper pipe taps are

used to mate parts will wedge against one another.

Taper pipe taps generate threads where the mated

parts are not required to withstand high fluid or

gas pressure.

What is the difference between taper, plug and bottom hand taps? Straight thread pipe taps (NPS) are used for

Taper Taps tapping holes or couplings for low-pressure work

Distribute the cutting load across 7-10 threads. with taper threaded pipe or fittings to secure a

Used for starting a threaded hole. joint when a sealer is used.

they are used when tapping by hand/for through holes

Plug Taps

Most commonly used, distribute the load across 3-5

threads of chamfer. They are used in blind holes with

adequate chip space and for through holes.

Bottom Taps

Have only 1 to 1-1/2 threads of chamfer and are the

only choice when threading near the bottom of a blind

hole. They have the poorest tap life and should be

avoided if tapping through holes.


Tap Talk

SH

OP

SU

PP

LIE

S

Cryo 135 Series

Cryo 135 drill bits are made of special hi-molybdenum tool steel with a cryogenic treatment and a nitride process. The cryogenic treatment creates a more uniform grain structure. This modifies the carbon micro-structure which increases resistance to wear. The nitride process diffuses nitrogen into the surface creating a surface hardness of 70 Rockwell C. This also creates a case hardening which results in superior tool life and exceptional corrosion resistance.

Made in USA 135° split point Jobber length 3 flats on shank (*3/16 and larger) Black & Silver finish Suggested uses: work hardening grades of

stainless steel and other hard metal drilling applications

Item ID SizeOverallLength

Pack Qty

10404CN 1/16 1-7/8 1210405CN 5/64 2 1210406CN 3/32 2-1/4 1210407CN 7/64 2-5/8 1210408CN 1/8 2-3/4 1210409CN 9/64 2-7/8 1210410CN 5/32 3-1/8 1210411CN 11/64 3-1/4 1210412CN 3/16 3-1/2 1210413CN 13/64 3-5/8 1210414CN 7/32 3-3/4 1210415CN 15/64 3-7/8 1210416CN 1/4 4 1210417CN 17/64 4-1/8 1210418CN 9/32 4-1/4 1210419CN 19/64 4-3/8 610420CN 5/16 4-1/2 610421CN 21/64 4-5/8 610422CN 11/32 4-3/4 610423CN 23/64 4-7/8 610424CN 3/8 5 610425CN 25/64 5-1/8 610426CN 13/32 5-1/4 610427CN 27/64 5-3/8 610428CN 7/16 5-1/2 610429CN 29/64 5-5/8 610430CN 15/32 5-3/4 610431CN 31/64 5-7/8 610432CN 1/2 6 6

Cryo 135 Series Drill Sets

Plastic circular index

Item ID # of Pieces Sizes Included02541 29 1/16" to 1/2" by 64ths

Drill Bits


1

SH

OP

SU

PP

LIE

S

BG135 Series

BG135 drills bits are made of special hi-molybdenum tool steel. These bits feature a 135° split point for fast penetration and accurate starting without a center punch. Bits are heat treated at 2,185°F and then nitro-carburize finished at 950°F to be measurably harder than high-speed steel.

Made in USA 135° split point Jobber length 3 flats on shank (*3/16 and larger) Black & Gold finish Suggested uses: work hardening grades of

stainless steel and other hard metal drilling applications


Pack Qty

10504 1/16 1-7/8 1210505 5/64 2 1210506 3/32 2-1/4 1210507 7/64 2-5/8 1210508 1/8 2-3/4 1210509 9/64 2-7/8 1210510 5/32 3-1/8 1210511 11/64 3-1/4 1210512 3/16 3-1/2 1210513 13/64 3-5/8 1210514 7/32 3-3/4 1210515 15/64 3-7/8 1210516 1/4 4 1210517 17/64 4-1/8 1210518 9/32 4-1/4 1210519 19/64 4-3/8 610520 5/16 4-1/2 610521 21/64 4-5/8 610522 11/32 4-3/4 610523 23/64 4-7/8 610524 3/8 5 610525 25/64 5-1/8 610526 13/32 5-1/4 610527 27/64 5-3/8 610528 7/16 5-1/2 610529 29/64 5-5/8 610530 15/32 5-3/4 610531 31/64 5-7/8 610532 1/2 6 6

BG135 Series Drill Sets

Plastic circular index

Item ID # of Pieces Sizes Included02524 15 1/16" to 1/2" by 32nds02523 29 1/16" to 1/2" by 64ths

Drill Bits


2

SH

OP

SU

PP

LIE

S

Magnum Series

The Magnum series mechanics length drill bit is a heavy duty 135° split point drill bit. This bit has a nitride surface treatment that gives it a hard, protective layer for drilling. This increases hardness which results in a bit that is measurably harder than high speed steel.

Made in the USA 135° split point Mechanics/maintenace length 3 flats on shank (*3/16 and larger) Black & Gold finish Suggested uses: stainless steel and other hard metal

drilling applications


Pack Qty

10604 1/16 1-7/8 1210605 5/64 2 1210606 3/32 2-1/4 1210607 7/64 2-3/8 1210608 1/8 2-1/2 1210609 9/64 2-5/8 1210610 5/32 2-3/4 1210611 11/64 2-7/8 1210612 3/16 3 1210613 13/64 3-1/8 1210614 7/32 3-1/4 1210615 15/64 3-3/8 1210616 1/4 3-1/2 1210617 17/64 3-5/8 1210618 9/32 3-3/4 1210619 19/64 3-7/8 610620 5/16 4 610621 21/64 4-1/16 610622 11/32 4-1/8 610623 23/64 4-3/16 610624 3/8 4-1/4 610625 25/64 4-5/16 610626 13/32 4-3/8 610627 27/64 4-7/16 610628 7/16 4-1/2 610629 29/64 4-5/8 610630 15/32 4-3/4 610631 31/64 4-7/8 610632 1/2 5 6

Magnum Series Drill Sets

Metal index*Plastic circular index

Item ID # of Pieces Sizes Included02527 15 1/16" to 1/2" by 32nds02526 29 1/16" to 1/2" by 64ths

02526P* 29 1/16" to 1/2" by 64ths

Drill Bits


3

SH

OP

SU

PP

LIE

S

Brute Series

Brute series bits are constructed of premium high speed steel and feature a NOMO (Nitride on Margin Only) surface treatment. Brute drill bits have a precision ground 135° split point which eliminates the need for pilot hole drilling and prevents “walking”.

Made in the USA 135° split point Jobber length, straight shank Black & Bright finish Penetrates faster than cobalt drill bits Suggested uses: stainless steel, titanium alloys, and

other hard to drill materials


Pack Qty

10404 1/16 1-7/8 1210405 5/64 2 1210406 3/32 2-1/4 1210407 7/64 2-5/8 1210408 1/8 2-3/4 1210409 9/64 2-7/8 1210410 5/32 3-1/8 1210411 11/64 3-1/4 1210412 3/16 3-1/2 1210413 13/64 3-5/8 1210414 7/32 3-3/4 1210415 15/64 3-7/8 1210416 1/4 4 1210417 17/64 4-1/8 1210418 9/32 4-1/4 1210419 19/64 4-3/8 610420 5/16 4-1/2 610421 21/64 4-5/8 610422 11/32 4-3/4 610423 23/64 4-7/8 610424 3/8 5 610425 25/64 5-1/8 610426 13/32 5-1/4 610427 27/64 5-3/8 610428 7/16 5-1/2 610429 29/64 5-5/8 610430 15/32 5-3/4 610431 31/64 5-7/8 610432 1/2 6 6

Brute Series Drill Sets

Metal index

Item ID # of Pieces Sizes Included02510 13 1/16" to 1/4" by 64ths02511 15 1/16" to 1/2" by 32nds02513 29 1/16" to 1/2" by 64ths

Drill Bits


4

SH

OP

SU

PP

LIE

S

Cobalt Series

The Cobalt drill bit features a heavy duty construction made to type J aircraft specifications. This bit has a 135° split point. This high red hardness of cobalt permits speeds 30% greater than high speed steel drill bits.

Made in the USA 135° split point Jobber length Straight shank Suggested uses: used for drilling holes in hard,

tough materials such as stainless steel, titanium, high temperature, high strength alloys and more


Pack Qty

10303 3/64 1-3/4 1210304 1/16 1-7/8 1210305 5/64 2 1210306 3/32 2-1/4 1210307 7/64 2-5/8 1210308 1/8 2-3/4 1210309 9/64 2-7/8 1210310 5/32 3-1/8 1210311 11/64 3-1/4 1210312 3/16 3-1/2 1210313 13/64 3-5/8 1210314 7/32 3-3/4 1210315 15/64 3-7/8 1210316 1/4 4 1210317 17/64 4-1/8 1210318 9/32 4-1/4 1210319 19/64 4-3/8 610320 5/16 4-1/2 610321 21/64 4-5/8 610322 11/32 4-3/4 610323 23/64 4-7/8 610324 3/8 5 610325 25/64 5-1/8 610326 13/32 5-1/4 610327 27/64 5-3/8 610328 7/16 5-1/2 610329 29/64 5-5/8 610330 15/32 5-3/4 610331 31/64 5-7/8 610332 1/2 6 6

Cobalt Drill Sets

Metal index


Drill Bits


5

SH

OP

SU

PP

LIE

S

Jobber Length Series

The Jobber drill bit is a general purpose high speed steel drill bit. This bit features a 118° point and has a surface treatment that prevents chip welding, improves chip flow and increases abrasion resistance.

Made in the USA Straight shank Black Oxide finish Suggested uses: general purpose drilling including

cast iron, steel, steel forging and more


Pack Qty

10001 1/64 3/4 1210002 1/32 1-3/8 1210003 3/64 1-3/4 1210004 1/16 1-7/8 1210005 5/64 2 1210006 3/32 2-1/4 1210007 7/64 2-5/8 1210008 1/8 2-3/4 1210009 9/64 2-7/8 1210010 5/32 3-1/8 1210011 11/64 3-1/4 1210012 3/16 3-1/2 1210013 13/64 3-5/8 1210014 7/32 3-3/4 1210015 15/64 3-7/8 1210016 1/4 4 1210017 17/64 4-1/8 1210018 9/32 4-1/4 1210019 19/64 4-3/8 610020 5/16 4-1/2 610021 21/64 4-5/8 610022 11/32 4-3/4 610023 23/64 4-7/8 610024 3/8 5 610025 25/64 5-1/8 610026 13/32 5-1/4 610027 27/64 5-3/8 610028 7/16 5-1/2 610029 29/64 5-5/8 610030 15/32 5-3/4 610031 31/64 5-7/8 610032 1/2 6 6

Jobber Length Drill Sets

Metal index


Drill Bits


6

SH

OP

SU

PP

LIE

S

Letter Size Series

The Letter Size series drill bit is a general purpose high speed steel drill bit. This bit features a 118° degree point and has a surface treatment that prevents chip welding, improves chip flow and increases abrasion resistance.




Pack Qty

10100 A 3-7/8 1210101 B 4 1210102 C 4 1210103 D 4 1210104 E 4 1210105 F 4-1/8 1210106 G 4-1/8 1210107 H 4-1/8 1210108 I 4-1/8 1210109 J 4-1/8 1210110 K 4-1/4 1210111 L 4-1/4 1210112 M 4-3/8 610113 N 4-3/8 610114 O 4-1/2 610115 P 4-5/8 610116 Q 4-3/4 610117 R 4-3/4 610118 S 4-7/8 610119 T 4-7/8 610120 U 5 610121 V 5 610122 W 5-1/8 610123 X 5-1/8 610124 Y 5-1/4 610125 Z 5-1/4 6

Letter Size Drill Set

Metal index

Item ID # of Pieces Sizes Included02502 26 Letters: A thru Z

Drill Bits


7

SH

OP

SU

PP

LIE

S

Wire Gauge Series

The Wire Gauge series drill bit is a general purpose high speed steel drill bit. This bit features a 118° degree point and has a surface treatment that prevents chip welding, improves chip flow, and increases abrasion resistance.




Pack Qty

10201 1 3-7/8 1210202 2 3-7/8 1210203 3 3-3/4 1210204 4 3-3/4 1210205 5 3-3/4 1210206 6 3-3/4 1210207 7 3-5/8 1210208 8 3-5/8 1210209 9 3-5/8 1210210 10 3-5/8 1210211 11 3-1/2 1210212 12 3-1/2 1210213 13 3-1/2 1210214 14 3-3/8 1210215 15 3-3/8 1210216 16 3-3/8 1210217 17 3-3/8 1210218 18 3-1/4 1210219 19 3-1/4 1210220 20 3-1/4 1210221 21 3-1/4 1210222 22 3-1/8 1210223 23 3-1/8 1210224 24 3-1/8 1210225 25 3 1210226 26 3 1210227 27 3 1210228 28 2-7/8 1210229 29 2-7/8 1210230 30 2-3/4 1210231 31 2-3/4 1210232 32 2-3/4 1210233 33 2-5/8 1210234 34 2-5/8 1210235 35 2-5/8 1210236 36 2-1/2 1210237 37 2-1/2 1210238 38 2-1/2 12


Pack Qty

10239 39 2-3/8 1210240 40 2-3/8 1210241 41 2-3/8 1210242 42 2-1/4 1210243 43 2-1/4 1210244 44 2-1/8 1210245 45 2-1/8 1210246 46 2-1/8 1210247 47 2 1210248 48 2 1210249 49 2 1210250 50 2 1210251 51 2 1210252 52 1-7/8 1210253 53 1-7/8 1210254 54 1-7/8 1210255 55 1-7/8 1210256 56 1-3/4 1210257 57 1-3/4 1210258 58 1-5/8 1210259 59 1-5/8 1210260 60 1-5/8 1210261 61 1-5/8 1210262 62 1-1/2 1210263 63 1-1/2 1210264 64 1-1/2 1210265 65 1-1/2 1210266 66 1-3/8 1210267 67 1-3/8 1210268 68 1-3/8 1210269 69 1-3/8 1210270 70 1-1/4 1210271 71 1-1/4 1210272 72 1-1/8 1210273 73 1-1/8 1210274 74 1 1210275 75 1 1210276 76 7/8 1210277 77 7/8 1210278 78 7/8 1210279 79 3/4 1210280 80 3/4 12

Wire Gauge Drill Set

Metal index

Item ID # of Pieces Sizes Included02504 60 Wire Gauge: #1 to #60

Drill Bits


8

SH

OP

SU

PP

LIE

S

Left Hand Series

The Left Hand jobber drill bit is a general purpose high speed steel drill bit. This bit features a 118° point.

Made in the USA Straight shank Bright finish Suggested uses: drill out broken bolts and other left

hand applications


Pack Qty

10903 3/64 1-3/4 1210904 1/16 1-7/8 1210905 5/64 2 1210906 3/32 2-1/4 1210907 7/64 2-5/8 1210908 1/8 2-3/4 1210909 9/64 2-7/8 1210910 5/32 3-1/8 1210911 11/64 3-1/4 1210912 3/16 3-1/2 1210913 13/64 3-5/8 1210914 7/32 3-3/4 1210915 15/64 3-7/8 1210916 1/4 4 1210917 17/64 4-1/8 1210918 9/32 4-1/4 1210919 19/64 4-3/8 1210920 5/16 4-1/2 610921 21/64 4-5/8 610922 11/32 4-3/4 610923 23/64 4-7/8 610924 3/8 5 610925 25/64 5-1/8 610926 13/32 5-1/4 610927 27/64 5-3/8 610928 7/16 5-1/2 610929 29/64 5-5/8 610930 15/32 5-3/4 610931 31/64 5-7/8 610932 1/2 6 6

Left Hand Drill Set

Metal index


Drill Bits


9

SH

OP

SU

PP

LIE

S

1/2" Shank S & D Series

½” Shank S & D Series drill bits are precision ground for a high degree of concentricity between shank and body diameter. These bits are made of high speed steel and feature a 118° point.

Made in USA Straight shank Bright & Black finish Suggested uses: drilling low and medium tensile

strength materials

Item ID Size Overall Length10033 33/64 610034 17/32 610035 35/64 610036 9/16 610037 37/64 610038 19/32 610039 39/64 610040 5/8 610041 41/64 610042 21/32 610043 43/64 610044 11/16 610045 45/64 610046 23/32 610047 47/64 610048 3/4 610049 49/64 610050 25/32 610051 51/64 610052 13/16 610053 53/64 610054 27/32 610055 55/64 610056 7/8 610057 57/64 610058 29/32 610059 59/64 610060 15/16 610061 61/64 610062 31/32 610063 63/64 610064 1 610068 1-1/16 610072 1-1/8 610076 1-3/16 610080 1-1/4 6

1/2" Shank S & D Series Drill Set

Metal index

Item ID # of Pieces Sizes Included02531 8 9/16" to 1" by 16ths

1/2" Shank S & D Nitro Series

Nitro ½” Shank S & D Series drill bits are made of high speed steel with a nitride surface treatment. This treatment gives a protective layer to the bit which increases its hardness. These bits feature a 118° split point.

Made in USA 3 flats on shank Black & Gold finish Suggested uses: stainless steel and other hard metal

drilling Other sizes and sets are available on a special order basis

Item ID Size Overall Length10136 9/16 610140 5/8 610144 11/16 610148 3/4 610152 13/16 610156 7/8 6

Drill Bits


10

SH

OP

SU

PP

LIE

S

3/8" Shank Nitro Series

Nitro 3/8” Shank Series drill bits are made of high speed steel with a nitride surface treatment. This treatment gives a protective layer to the bit which increases its hardness. These bits feature a 135° split point.

Made in USA Straight shank Black & Gold finish Suggested uses: stainless steel and other hard metal

drilling Drill sets available on a special order basis

Item ID Size Overall Length11225 25/64 5-1/811226 13/32 5-1/411227 27/64 5-3/811228 7/16 5-1/211229 29/64 5-5/811230 15/32 5-3/411232 1/2 5-7/8

3/8" Shank Mechanics Length Nitro Series

Nitro 3/8” Shank Mechanics Length Series drill bits are made of high speed steel with a nitride surface treatment. This treatment gives a protective layer to the bit which increases its hardness. These bits feature a 135° split point.

Made in USA 3 flats on shank Black & Gold finish Suggested uses: stainless steel and other hard metal

drilling

Item ID Size Overall Length10640 25/64 4-5/1610641 13/32 4-3/810642 27/64 4-7/1610643 7/16 4-1/210644 29/64 4-5/810645 15/32 4-3/410646 31/64 4-7/810647 1/2 5

3/8" Shank Mechanics Length Nitro SeriesDrill Set

Metal index


Drill Bits


11

SH

OP

SU

PP

LIE

S

Metric Jobber Brute Series

Brute series bits are constructed of premium high speed steel and feature a NOMO (Nitride on Margin Only) surface treatment. Brute drill bits have a precision ground 135° split point which eliminates the need for pilot hole drilling and prevents “walking”.

Made in USA Straight shank Black & Bright finish Penetrates faster than cobalt drill bits Suggested uses: stainless steel, titanium alloys, and

other hard to drill materials

Item ID SizeDecimal

EquivalentOverallLength

10450 1.0 .0394 1-5/810451 1.5 .0591 1-7/810452 2.0 .0787 210453 2.5 .0984 2-3/810454 3.0 .1181 2-3/410455 3.5 .1378 2-7/810456 4.0 .1575 3-1/410457 4.5 .1772 3-3/810458 5.0 .1969 3-5/810459 5.5 .2165 3-3/410460 6.0 .2362 410461 6.5 .2559 4-1/810462 7.0 .2756 4-1/810463 7.5 .2953 4-3/810464 8.0 .3150 4-1/210465 8.5 .3346 4-3/410466 9.0 .3543 4-7/810467 9.5 .374 510468 10.0 .3937 5-1/810469 10.5 .4134 5-1/410470 11.0 .4331 5-1/210471 11.5 .4528 5-5/810472 12.0 .4724 5-7/810473 12.5 .4921 610474 13.0 .5118 6

Screw Machine Length Series

Screw Machine Length Series drill bits are made of high speed steel and feature a 135° split point. Made in USA Straight shank Black finish Suggested uses: machine and portable drilling in

hard sheet metal alloys such as stainless and titanium


Pack Qty

11008 1/8 1-7/8 1211012 3/16 2-3/16 1211014 7/32 2-3/8 1211016 1/4 2-1/2 1211020 5/16 2-13/16 611024 3/8 3-1/8 611057 #7 2-1/4 1211009 #29 1-15/16 1211010 #30 1-15/16 12

Double End Series

Double End Series drill bits are made of high speed steel and feature a 118° point. These bits have flutes and cutting points on both ends. Made in USA Straight shank Black finish Suggested uses: general purpose drilling

applications


Pack Qty

10707 7/64 1-7/8 1210708 1/8 2 1210709 9/64 2 1210710 5/32 2-1/16 1210712 3/16 2-3/16 1210716 1/4 2-1/2 1210711 #11 2-1/4 1210730 #30 2 12

Drill Bits


12

SH

OP

SU

PP

LIE

S

6" Aircraft Extension Series

6” Aircraft Extension Series drill bits are made of high speed steel and feature a 135° split point. These are manufactured to NAS 907 Type C specifications. Straight shank Black finish Suggested uses: for portable or machine drilling in

high tensile strength alloy steels


Pack Qty

11412 3/16 6 611413 13/64 6 611414 7/32 6 611415 1/4 6 611416 15/64 6 611417 5/16 6 611424 3/8 6 6

12" Aircraft Extension Series

12” Aircraft Extension Series drill bits are made of high speed steel and feature a 135° split point. These are manufactured to NAS 907 Type C specifications. Straight shank Black finish Suggested uses: for portable or machine drilling in

high tensile strength alloy steels


Pack Qty

11509 9/64 12 611512 3/16 12 611513 13/64 12 611514 7/32 12 611515 15/64 12 611516 1/4 12 611520 5/16 12 311524 3/8 12 3

Masonry Carbide Tip Series

Masonry Carbide Tip Series drill bits are made for rotary and percussion drilling in light to medium hard building materials. Straight shank Black & Gold tipped finish Suggested uses: concrete, brick, terra cotta,

sandstone, cinder block, ceramic tile, slate and more

Item ID Size Flute LengthOverallLength

10808 1/8 1-1/2 310812 3/16 3-1/2 610816 1/4 3-1/2 610820 5/16 3-1/2 610824 3/8 3-1/2 610828 7/16 3-1/2 610832 1/2 3-1/2 610836 5/8 3-1/2 610838 3/4 4 6-1/210840 1 4 6-1/2

Spade Bit

Spades Bits feature a blue-groove point and cutting edge for faster chip removal. These bits are 4x faster than standard spade bits. Grooved hex shank prevents slipping in drill chuck. Bright finish Suggested uses: drilling large holes safely in wood


Shank Size

11904 1/4 6 1/411905 5/16 6 1/411906 3/8 6 1/411908 1/2 6 1/411910 5/8 6 1/411912 3/4 6 1/411914 7/8 6 1/411916 1 6 1/411918 1 1/8 6 1/411920 1 1/4 6 1/411922 1 3/8 6 1/411924 1 1/2 6 1/4

Drill Bits


13

SH

OP

SU

PP

LIE

S

Vari-Bit Step Drills

Vari-bit step drills are made of high speed steel. These bits feature a two flute design that cuts faster, cleaner and round holes. Made in USA Steam oxide coating adds durability 3 sided shank Suggested uses: stainless steel, brass, copper, aluminum, steel, cast iron, plastic

and wood

Item ID # of Hole Sizes Hole Size Range Chuck Size Lenox Vari-Bit #11531 13 1/8" to 1/2" by 32nds 1/4 VB111532 9 1/2" to 1" by 16ths 3/8 VB211533 9 1/4" to 3/4" by 16ths 3/8 VB311534 6 3/16" to 1/2" by 16ths 1/4 VB411536 2 3/8", 1/2" 1/4 VB611537 1 7/8" (for 1/2" conduit) 3/8 VB711539 12 3/16" to 7/8" by 16ths 3/8 VB811541 2 7/8", 1-1/8" 3/8 VB1111542 5 7/8",1", 1-1/8", 1-1/4", 1-3/8" 3/8 VB12

Vari-Bit Kit

Bits come nicely organized in a plastic caseItem ID # of Pieces Kit Includes11545 4 11531,11532,11537,11539

Step Drills


14

SH

OP

SU

PP

LIE

S

Reamer Brute Series

Reamer Brute Series are made of high speed steel and feature a collar stop. The reamers are used to enlarge and align existing holes. Straight shank Black & Bright finish Suggested uses: steel erection, automotive, truck &

trailer repair, cuts stainless steel & tough alloys


ShankDiameter

11755 3/8 5 3/811756 1/2 5-15/16 1/211757 5/8 6-9/16 1/211758 3/4 7 1/211759 7/8 7-1/4 1/211760 1 7-1/4 1/2

Reamer Brute Series Set

Reamers come nicely organized in a plastic caseItem ID # of Pieces Sizes Included02529 3 1/2, 5/8, 3/4

Countersinks- 3 Flute

3 Flute Countersinks are made of high speed steel. These countersinks are 82° and are for chatter free performance in countersinking, deburring and chamfering. Straight shank Black & Bright finish Suggested uses: for machine countersinking,

chamfering and deburring in steels and alloys

Item ID Size Shank Diameter11316 1/4 1/411324 3/8 1/411332 1/2 1/411335 5/8 3/811348 3/4 1/2

Combined Drill & Countersink

Combined Drill & Countersinks are made of high speed steel. These feature a 60° angle. Made in USA Bright finish Suggested uses: for drilling and countersinking the

center holes in many applications


Drill Size

10743 3 2 7/64

Cutting Tools


15

SH

OP

SU

PP

LIE

S

Cylindrical

Carbide Burs are manufactured from tungsten carbide. Carbide burrs are one of the most widely used and versatile cutting tools, used in virtually every industry. Made in USA ¼” shank Suggested uses: to remove burrs that

often remain on the work piece after the machining process

Item ID DiameterLengthof Cut

List No.

11570 1/4 5/8 SA-111571 3/8 3/4 SA-311572 1/2 1 SA-5

Cylindrical Ball Nose


List No.

11575 1/4 5/8 SC-111576 3/8 3/4 SC-311577 1/2 1 SC-5

Round Tree Shape


List No.

11590 1/4 5/8 SF-111591 3/8 3/4 SF-311592 1/2 1 SF-5

Pointed Tree Shape


List No.

11595 1/4 5/8 SG-111596 3/8 3/4 SG-311597 1/2 1 SG-5

Ball Shape


List No.

11580 1/4 1/4 SD-111581 3/8 3/8 SD-311582 1/2 1/2 SD-5

Taper Radius


List No.

11600 1/4 5/8 SL-111601 3/8 1-1/16 SL-311602 1/2 1-1/8 SL-4

Oval Shape


List No.

11585 1/4 3/8 SE-111586 3/8 5/8 SE-311587 1/2 7/8 SE-5

Cone Shape


List No.

11605 1/4 1 SM-311606 3/8 5/8 SM-411607 1/2 7/8 SM-5

Aluminum Cut Cylindrical

Aluminum Cut Carbide Burs are manufactured from tungsten carbide. These burs have more aggressive cutting edges for rapid stock removal with minimum chip. Made in USA ¼” shank Suggested uses: ideal for aluminum

and other non-ferrous materials


List No.

11621 3/8 3/4 SA-3NF11622 1/2 1 SA-5NF

Aluminum Cut CylindricalBall Nose


List No.

11626 3/8 3/4 SC-3NF11627 1/2 1 SC-5NF

Aluminum Cut Tree Radius


List No.

11641 3/8 3/4 SF-3NF11642 1/2 1 SF-5NF

Aluminum Cut Ball Shape


List No.

11631 3/8 5/16 SD-3NF11632 1/2 7/16 SD-5NF

Aluminum Cut Oval Shape


List No.

11636 3/8 5/16 SE-3NF11637 1/2 7/16 SE-5NF

Carbide Burs 1/4" Shank


16

SH

OP

SU

PP

LIE

S

Screw Extractors

Screw Extractors are made of carbon steel. This series features a spiral flute. Bright finish Suggested uses: for removing broken screws, pipes,

bolts, and studs

Item ID Size Screw Size Pipe Size Drill Size11701 1 3/16 5/6411702 2 1/4 7/6411703 3 5/16 5/3211704 4 7/16 to 9/16 1/411705 5 9/16 to 3/4 1/8 17/6411706 6 3/4 3/8 13/3211707 7 1 to 1-3/8 1/2 17/3211708 8 1-3/8 3/4 13/16

Screw Extractor Set

Item ID # of Pieces Set Includes11750 5 Size #1-#5

Screw Extractor / LH Drill Set

Item ID # of Pieces Set Includes11752 10 Size #1-#5 & Drill Bits

Screw Extractors


17

SH

OP

SU

PP

LIE

S

Taper Taps HSS

Taper Taps are made of high speed steel and feature a 7-10 pitch chamfer length. Taper taps will start the thread square with the work piece. These straight flute hand taps are the most popular and versatile style of taps in general machine tapping operations. Made in USA Bright finish Suggested uses: general use in production tapping

or hand operations in a wide range of application material groups

Other sizes available on a special order basis

Item ID SizeThreadLength

# ofFlutes

Drill Size

12100 4-40 9/16 3 4312101 5-40 5/8 3 3812102 6-32 11/16 3 3612104 8-32 3/4 4 2912106 10-24 7/8 4 2512107 10-32 7/8 4 2112108 12-24 15/16 4 1612110 1/4-20 1 4 712111 1/4-28 1 4 312112 5/16-18 1-1/8 4 F12113 5/16-24 1-1/8 4 112114 3/8-16 1-1/4 4 5/1612115 3/8-24 1-1/4 4 Q12116 7/16-14 1-7/16 4 U12117 7/16-20 1-7/16 4 25/6412118 1/2-13 1-21/32 4 27/6412119 1/2-20 1-21/32 4 29/6412120 9/16-12 1-21/32 4 31/6412121 9/16-18 1-21/32 4 33/6412122 5/8-11 1-13/16 4 17/3212123 5/8-18 1-13/16 4 37/6412124 3/4-10 2 4 21/3212125 3/4-16 2 4 11/1612126 7/8-9 2-7/32 4 49/6412127 7/8-14 2-7/32 4 13/1612128 1-8 2-1/2 4 7/812129 1-14 2-1/2 4 15/16

Taper Taps Metric HSS


# ofFlutes

Drill Size

12442 4-0.7 3/4 4 3012444 5-0.8 7/8 4 1912447 6-1.0 1 4 1012449 7-1.0 1-1/8 4 15/6412453 8-1.25 1-1/8 4 17/6412460 10-1.5 1-1/4 4 11/3212467 12-1.75 1-21/32 4 13/3212142 18-2.5 1-13/16 4 39/64

Taps


18

SH

OP

SU

PP

LIE

S

Plug Taps HSS

Plug Taps are made of high speed steel and feature a 3-5 pitch chamfer length. These straight flute hand taps are the most popular and versatile style of taps in general machine tapping operations. Made in USA Bright finish Suggested uses: through hole applications and

general use in production tapping or hand operations in a wide range of application material groups

*Carbon steel Other sizes available on a special order basis


# ofFlutes

Drill Size

12150 4-40 9/16 3 4312151 5-40 5/8 3 3812152 6-32 11/16 3 3612154 8-32 3/4 4 2912156 10-24 7/8 4 2512157 10-32 7/8 4 2112158 12-24 15/16 4 1612160 1/4-20 1 4 712161 1/4-28 1 4 312162 5/16-18 1-1/8 4 F12163 5/16-24 1-1/8 4 112164 3/8-16 1-1/4 4 5/1612165 3/8-24 1-1/4 4 Q12166 7/16-14 1-7/16 4 U12167 7/16-20 1-7/16 4 25/6412168 1/2-13 1-21/32 4 27/6412169 1/2-20 1-21/32 4 29/6412170 9/16-12 1-21/32 4 31/6412171 9/16-18 1-21/32 4 33/6412172 5/8-11 1-13/16 4 17/3212173 5/8-18 1-13/16 4 37/6412174 3/4-10 2 4 21/3212175 3/4-16 2 4 11/1612176 7/8-9 2-7/32 4 49/6412178 1-8 2-1/2 4 7/8

Plug Taps Metric HSS


# ofFlutes

Drill Size

12400 3-0.5 5/8 3 4012402 4-0.7 3/4 4 3012404 5-0.8 7/8 4 1912407 6-1.0 1 4 1012409 7-1.0 1-1/8 4 15/6412412 8-1.0 1-1/8 4 F12413 8-1.25 1-1/8 4 17/6412415* 9-1.0 1-1/8 4 5/1612418 10-1.0 7/8 4 23/6412419 10-1.25 7/8 4 S12420 10-1.5 1-1/4 4 11/3212428 12-1.25 15/16 4 27/6412426 12-1.5 15/16 4 13/3212427 12-1.75 1-21/32 4 13/3212430 14-1.25 1-7/64 4 33/6412431 14-1.5 1-7/64 4 1/212433 14-2.0 1-21/32 4 15/3212436 16-1.5 1-1/4 4 37/6412438 16-2.0 1-13/16 4 35/64

Taps


19

SH

OP

SU

PP

LIE

S

Bottoming Taps HSS

Bottoming Taps are made of high speed steel and feature a 1-2 pitch chamfer length. These straight flute hand taps are the most popular and versatile style of taps in general machine tapping operations. Made in USA Bright finish Suggested uses: generating threads to the bottom

and general use in production tapping or hand operations in a wide range of application material groups

Other sizes available on a special order basis


# ofFlutes

Drill Size

12202 6-32 11/16 3 3612204 8-32 3/4 4 2912206 10-24 7/8 4 2512207 10-32 7/8 4 2112208 12-24 15/16 4 1612210 1/4-20 1 4 712211 1/4-28 1 4 312212 5/16-18 1-1/8 4 F12213 5/16-24 1-1/8 4 112214 3/8-16 1-1/4 4 5/1612215 3/8-24 1-1/4 4 Q12216 7/16-14 1-7/16 4 U12217 7/16-20 1-7/16 4 25/6412218 1/2-13 1-21/32 4 27/6412219 1/2-20 1-21/32 4 29/6412220 9/16-12 1-21/32 4 31/6412221 9/16-18 1-21/32 4 33/6412222 5/8-11 1-13/16 4 17/3212223 5/8-18 1-13/16 4 37/6412224 3/4-10 2 4 21/3212225 3/4-16 2 4 11/1612226 7/8-9 2-7/32 4 49/6412227 7/8-14 2-7/32 4 13/1612228 1-8 2-1/2 4 7/812229 1-14 2-1/2 4 15/16

Bottoming Taps Metric HSS


# ofFlutes

Drill Size

12482 4-0.7 3/4 4 3012484 5-0.8 7/8 4 1912487 6-1.0 1 4 1012489 7-1.0 1-1/8 4 15/6412493 8-1.25 1-1/8 4 17/6412500 10-1.5 1-1/4 4 11/3212507 12-1.75 1-21/32 4 13/32

Taps


20

SH

OP

SU

PP

LIE

S

Spiral Point Taps

Spiral Point Taps are made of high speed steel.Sometimes referred to as “Gun Taps”, spiral point taps shoot the chips ahead of the tap. Made in USA Bright finish Suggested uses: for production tapping thru holes

and more More sizes available on a special order basis


# ofFlutes

Drill Size

12248 6-32 11/16 2 3612249 8-32 3/4 2 2912250 10-24 7/8 2 2512251 10-32 7/8 2 2112254 1/4-20 1 2 712256 5/16-18 1-1/8 2 F12258 3/8-16 1-1/4 3 5/1612260 7/16-14 1-7/16 3 U12262 1/2-13 1-21/32 3 27/64

Taper Pipe Taps Carbon Steel

Taper Pipe Taps are made of carbon steel. These taps feature a ¾” taper/ft and are national pipe thread. Bright finish Suggested uses: for rethreading, cleaning up

damaged and rusty threads


Drill Size

12308 1/8 3/4 Q12316 1/4 1-1/16 7/1612324 3/8 1-1/16 9/1612332 1/2 1-3/8 45/6412348 3/4 1-3/8 29/3212364 1 1-3/4 1-9/6412380 1-1/4 1-3/4 1-31/64

Tap Wrench T-Handle

Item ID Size Range12090 0-1/412091 1/4-1/2

Tap & Drill Set 18pc

18pc Tap & Drill Set is made of high speed steel taps & drill bits. The sizes included in the set are 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/8-16, 7/16-14, ½-13 and the proper drill bit to use for the above taps. Made in USA Suggested uses: through-hole applications in carbon

steel, alloy steel, stainless steel and other materials

Item ID # of Pieces02530 18

Taps & Accessories


21

SH

OP

SU

PP

LIE

S

Hex Rethreading Dies- Fractional

Hex Rethreading Dies are made of carbon steel. The hexagon shape allows these to be used with a die stock or ordinary adjustable wrenches. Bright finish Suggested uses: for rethreading worn or rusty

threads in maintenance shops and more

Item ID SizeSize Across

FlatsDie

Thickness12004 6-32 1 3/812006 8-32 1 3/812008 10-24 1 3/812009 10-32 1 3/812010 12-24 1 3/812012 1/4-20 1 3/812013 1/4-28 1 3/812014 5/16-18 1 3/812015 5/16-24 1 3/812016 3/8-16 1 3/812017 3/8-24 1 3/812018 7/16-14 1 3/812019 7/16-20 1 3/812020 1/2-13 1 3/812021 1/2-20 1 3/812022 9/16-12 1-7/16 5/812023 9/16-18 1-7/16 5/812024 5/8-11 1-7/16 5/812025 5/8-18 1-7/16 5/812026 3/4-10 1-7/16 5/812027 3/4-16 1-7/16 5/812028 7/8-9 1-7/8 3/412029 7/8-14 1-7/8 3/412030 1-8 1-7/8 3/412031 1-14 1-7/8 3/4

Hex Rethreading Dies- Metric

Item ID SizeSize Across

FlatsDie

Thickness12050 3-0.5 1 3/812051 4-0.7 1 3/812052 5-0.8 1 3/812053 5-0.9 1 3/812055 6-1.0 1 3/812057 7-1.0 1 3/812059 8-1.0 1 3/812060 8-1.25 1 3/812062 9-1.0 1 3/812063 9-1.25 1 3/812065 10-1.0 1 3/812066 10-1.25 1 3/812067 10-1.5 1 3/812069 11-1.5 1 3/812071 12-1.5 1 3/812072 12-1.75 1 3/812074 14-1.25 1-7/16 5/812075 14-1.5 1-7/16 3/412077 14-2.0 1-7/16 3/412079 16-1.5 1-7/16 3/412080 16-2.0 1-7/8 3/4

Hex Rethreading Dies- Pipe

Item ID Size TPISize Across

Flats12801 1/8 27 25/3212802 1/4 18 1-1/1612803 3/8 18 1-1/412804 1/2 14 1-5/812805 3/4 14 1-13/1612806 1 11-1/2 2-3/16

Hex Dies


22

SH

OP

SU

PP

LIE

S

Empty Metal Drill Index

Item ID # of Slots Description11809 13 1/16 to 1/4 by 64ths11810 15 1/16 to 1/2 by 32nds11811 29 1/16 to 1/2 by 64ths11812 26 A to Z Letter Drills11813 60 #1-60 Wire Gauge11814 18 UNC Taps & Drills

Empty Round Plastic Index

Item ID # of Slots Description Color11816 29 1/16 to 1/2 by 64ths Ultra Index Black11818 29 1/16 to 1/2 by 64ths Ultra Index Orange

Empty Metal Drill Cabinet

Dimensions: 14-5/8” wide x 7-3/8” deep x 7-3/4” tall Item ID # of Slots Description11815 29 1/16 to 1/2 by 64ths - 3 Drawers

Empty Cabinets & Indexes


23

SH

OP

SU

PP

LIE

S

Bi-Metal Hole Saws

Bi-Metal Hole Saws feature enhanced tooth geometry, a thin kerf design, and an advanced coating which contributes to the cutting process. These features increase the life in metal cutting by 2X. Plug removal slot allows for easy removal of material. Suggested uses: metal, pipe, wood, plastics,

stainless steel and more

Item ID DiameterPipe Tap

Size

PipeEntrance

SizeLenox #

12610 5/8 10L12612 3/4 1/2" 3/8" 12L12614 7/8 3/4" 1/2" 14L12616 1 16L12617 1-1/16 17L12618 1-1/8 1 3/4 18L12620 1-1/4 20L12622 1-3/8 1 22L12624 1-1/2 1-1/4 24L12626 1-5/8 26L12628 1-3/4 1-1/2 1-1/4 28L12630 1-7/8 30L12632 2 1-1/2 32L12634 2-1/8 34L12636 2-1/4 2 36L12638 2-3/8 38L12640 2-1/2 2 40L12642 2-5/8 2-1/2 42L12643 2-3/4 44L12648 3 2-1/2 48L12652 3-1/4 3 52L12656 3-1/2 56L12658 3-5/8 3 58L12660 3-3/4 3-1/2 60L12664 4 64L12666 4-1/8 3-1/2 66L12668 4-1/4 4 68L12672 4-1/2 4 72L12676 4-3/4 4-1/2 76L12680 5 80L12696 6 96L

Hole Saw Arbors

Item IDFits Hole

SawsChuckSize

ShankType

Lenox #

12601 9L-19L 1/2" Hex 1L12602 20L-96L 1/2" Hex 2L12604 9L-19L 1/4" 3-sided 4L12599 9L-19L 3/8" Hex 5L12600 20L-96L 3/8" Hex 6L

Hole Saw Pilot Bits

Item ID Fits Arbor # Fits Chuck Size12603 2L,5L,6L 1/412605 1L,4L 1/4

Extensions

Item ID Length Chuck Size Fits Arbor #11411 6" 1/4 4L12606 12" 1/2 1L,2L

Arbor Adapter

Item ID Fits Arbor #12607 1L,4L,5L

Hole Saws & Accessories


24

SH

OP

SU

PP

LIE

S

Bi-Metal

Bi-Metal Hole Saw Kits feature enhanced tooth geometry, a thin kerf design, and an advanced coating which contributes to the cutting process. These features increase the life in metal cutting by 2X. Plug removal slot allows for easy removal of material. Heavy duty plastic case Suggested uses: metal, pipe, wood, plastics, stainless steel and more

Item ID Description # of Pieces Sizes Accessories Included

12700Super

Electrician17

3/4, 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2,2-11/16, 3, 3-5/8, 4-1/8, 4-3/4

(2)12605,12603,12602,12599

12701 Electrician 10 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2 12605,12602,12599,1260712702 Contractor 9 7/8, 1, 1-1/4, 1-3/8, 1-1/2, 1-3/4, 2-1/8 12599,1260012703 Plumber 9 3/4, 7/8, 1-1/8, 1-3/8, 2, 2-1/2 12602,12600,1260712704 Refrigeration 8 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2 12599,1260012705 Automotive 7 3/4, 7/8, 1, 1-1/8, 1-1/4 12599,12607

12706 Big Daddy 263/4, 7/8, 1, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2,2-1/8, 2-1/4, 2-1/2, 2-11/16, 3, 3-1/4,3-3/8, 3-5/8, 3-3/4, 4-1/8, 4-1/2, 4-3/4

(2)12605,12603,12601,12602,12599

Hole Saw Kits


25

SH

OP

SU

PP

LIE

S

Bi-Metal Hacksaw Blades

Bi-Metal Hack Saw Blades feature a bi-metal construction which allows the blade to bend and flex without breaking. New blade design delivers up to 100% longer blade life than previous design. Suggested uses: metal, pipe, wood, plastics, and

more

Item ID Length Width TPI13000 10" 1/2 1813001 10" 1/2 2413002 10" 1/2 3213005 12" 1/2 1413006 12" 1/2 1813007 12" 1/2 2413008 12" 1/2 32

Compact Hand Saw

Heavy duty aluminum handle

Item ID Blade Length13093 12"

High Tension Hacksaw Frame

High Tension Hacksaw Frame’s unique design allows blade to tension up to 50,000 PSI, resulting in fast, straight cuts. Lightweight, and can convert to a jab saw.

Item ID Blade Length13090 12"

Bi-Metal Band Saw Blades

Bi-Metal Band Saw Blades feature a treated band which increases strength. Bi-metal construction resists breaking and extends blade life.

Item ID Length Width Thickness TPI12571 44-7/8" 1/2" .020 10/1412572 44-7/8" 1/2" .020 1412573 44-7/8" 1/2" .020 18

Tri-Fold Saw

Tri-Fold Saw features a die cast aluminum construction. Accepts both hacksaw blades and reciprocating saw blades

Item ID13099

Circular Saw Blade

Circular Saw Blade features a corrosion resistant coating which helps to prevent rust. Prevision ground teeth for smooth, accurate cuts. Suggested uses: framing, ripping and more Item ID Diameter Teeth Arbor Hole25130 7-1/4" 24 5/8

Saw Blades & Tools


26

SH

OP

SU

PP

LIE

S

Jig Saw Blades- Universal Shank

Jig Saw Blades feature a bi-metal construction that resists breaking and extends blade life. Comes in both universal shank and t-shank styles Suggested uses: wood, metal and other materials depending on the teeth per

inch/application

Item ID Length TPI Application Mfg #13070 2-3/4" 20 Wood. Scroll Cuts, Laminates 320JC13072 3-1/2" 10/14 Woods, Plastic, Light Metals 340JV13064 3-5/8" 14 Metals 1/4" Thick and Above 314J13066 3-5/8" 18 Metals Over 1/8" Thick 318J13068 3-5/8" 24 Thin Metal, Plastic, Polys 324J13060 4" 6 Wood, Fast Cut, Rough 486J13062 4" 10 Wood, Nail-Embedded 480J13074 4" 10 Wood, Clean, Smooth Cuts 450J

Jig Saw Blades- T-Shank

* Bosch brand

Item ID Length TPI Application Mfg #12900 4" 6 Wood, Fast Cut, Rough 406S13076* 5-1/4" 14 Metals 1/4 Thick and Above T318B13075* 5-1/4" 24 Thin Metal, Plastic, Polys T318A

Air Saw Blades

Air Saw Blades feature a bi-metal construction that resists breaking and extends blade life. High speed steel teeth provide a strong, long lasting cutting edge. Suggested uses: for pneumatic machine cutting in automotive repair & sheet

metal

Item ID Length TPI Application13077 4" 18 Metals 1/8" to 3/16"13078 4" 24 Metals 1/16" to 1/8"13079 4" 32 Metals 1/16" and Thinner

Saws


27

SH

OP

SU

PP

LIE

S

Reciprocating Saw Blades- All Purpose

All Purpose Reciprocating Saw Blades feature a bi-metal construction that is shatter-, heat-, and wear-resistant. High speed blasting along the cutting edge strengthens the blade. Suggested uses: wood, metal and other materials depending on the teeth per

inch/application *Heavy Duty Metal Cutting Blade

Item ID Length TPI Application Mfg #13024 3-5/8" 14 Heavy Gauge Metal, Rubber and Fiber 314RC13026 3-5/8" 18 Heavy Gauge Metal, Conduit, Tubing 318RC13028 4" 14 Heavy Gauge Metal, Rubber and Fiber 414R13030 4" 18 Heavy Gauge Metal, Conduit, Tubing 418R13032 4" 24 Metal and Galvanized Pipe - 18 Gauge and Under 424R13020 6" 4 Wood and Nail-Embedded Wood 634R13034 6" 6 Wood, Nail Embedded, Composition Materials 606R13044 6" 6 Plaster, Plaster Board 636RP13046 6" 6 Wood and Nail-Embedded, Rough, Fast Cut 656R13050 6" 6 Wood Contours, Nail Embedded 676RC13036 6" 10 Woods, Compositions, Plastic, Aluminum 610R13038 6" 14 Heavy Gauge Metal, Rubber and Fiber 614R13053* 6" 14 Heavy metal and pipe 6114R13040 6" 18 Heavy Gauge Metal, Conduit, Tubing 618R13042 6" 24 Metal and Galvanized Pipe - 18 Gauge and Under 624R13052 8" 10 Wood, Plastics, Aluminum, Stainless Steel 810R13051 8" 18 Heavy Gauge Metal 1/4"-1/2", Conduit and Tubing 818R13054 9" 6 Wood and Nail-Embedded, Rough, Fast Cut 956R13048 12" 6 Wood and Nail-Embedded, Rough, Fast Cut 156R13022 12" 10/14 All Woods, Plastic, Cast Alum, Light Metals 110R13023 12" 18 Heavy Gauge Metal, Conduit, Tubing 118R

Reciprocating Saw Blades- Demolition

Demolition Series Reciprocating Saw Blades feature a bi-metal construction that isshatter-, heat-, and wear-resistant. High speed blasting along the cutting edge strengthens the blade. Suggested uses: tough applications in a wide variety of materials

Item ID Length TPI Application Mfg #13055 6" 6 Wood, Rough, Nail Embedded 6066R13056 6" 10/14 Tough Metal Cutting up to 1/2" 650R13057 9" 6 Wood and Nail Embedded Wood 966R13058 9" 10 Heavy Gauge Metals 1/4" Thick and Above 960R

Saws


28

SH

OP

SU

PP

LIE

S

Fractional Inserts

Thread Repair Inserts are helically coiled inserts that are constructed of stainless steel wire that has been rolled to a carefully controlled thread form. Once installed, these thread repair inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original. Suggested uses: designed to repair stripped threads in a variety of metals including

aluminum, aluminum alloys, steel, and cast iron *Spark plug insert

Item ID Size Length Drill Size Tap #19000 8-32 .246 11/6419002 10-24 .285 13/64 1955219003 10-32 .285 13/64 1955319004 12-24 .324 15/6419006 1/4-20 .375 17/64 1955619007 1/4-28 .375 17/64 1955719008 5/16-18 .469 21/64 1955819009 5/16-24 .469 21/64 1955919010 3/8-16 .562 25/64 1956019011 3/8-24 .562 25/64 1956119012 7/16-14 .656 29/64 1956219013 7/16-20 .656 29/64 1956319014 1/2-13 .750 17/32 1956419015 1/2-20 .750 33/64 1956519016 9/16-12 .844 19/3219017 9/16-18 .844 37/6419018 5/8-11 .938 21/32 1956819019 5/8-18 .938 41/64 1956919020 3/4-10 1.125 25/3219021 3/4-16 1.125 49/6419022 7/8-9 1.312 29/3219023 7/8-14 1.312 57/6419024 1-8 1.500 1-1/3219025 1-14 1.500 1-1/64

Metric Inserts

Item ID Size Length Drill Size19209 6-1.0 .354 1/419213 8-1.25 .472 21/6419214 8-1.0 .472 21/6419217 10-1.5 .591 13/3219218 10-1.25 .591 13/3219411 11-1.5 .649 29/6419412 12-1.75 .709 31/6419415 12-1.5 .709 31/6419414 12-1.25 .709 31/6419413* 14-1.25 .750 9/1619421 16-1.5 .945 21/32

Thread Repair Inserts


29

SH

OP

SU

PP

LIE

S

Fractional Kits

Each Kit Includes: Inserts, Tap, Installation Tool and Instructions

Item ID Size Insert Length # of Inserts in Kit Drill Size Tap #19100 8-32 .246 12 11/6419102 10-24 .285 12 13/64 1955219103 10-32 .285 12 13/64 1955319104 12-24 .324 12 15/6419106 1/4-20 .375 12 17/64 1955619107 1/4-28 .375 12 17/64 1955719108 5/16-18 .469 12 21/64 1955819109 5/16-24 .469 12 21/64 1955919110 3/8-16 .562 12 25/64 1956019111 3/8-24 .562 12 25/64 1956119112 7/16-14 .656 6 29/64 1956219113 7/16-20 .656 6 29/64 1956319114 1/2-13 .750 6 1732 1956419115 1/2-20 .750 6 33/64 1956519116 9/16-12 .844 6 19/3219117 9/16-18 .844 6 37/6419118 5/8-11 .938 6 21/32 1956819119 5/8-18 .938 6 41/64 1956919120 3/4-10 1.125 4 25/3219121 3/4-16 1.125 4 49/64

Metric Kits

Item ID Size Insert Length # of Inserts in Kit Drill Size19305 5-0.8 .295 12 13/6419309 6-1.0 .354 12 1/419313 8-1.25 .472 12 21/6419314 8-1.0 .472 6 21/6419315 9-1.25 .531 12 3/819317 10-1.5 .591 12 13/3219316 10-1.25 .591 12 13/3219318 11-1.5 .649 6 29/6419319 12-1.75 .709 6 31/6419324 12-1.5 .709 6 31/6419325 12-1.25 .709 6 31/6419320 14-2.0 .75 6 37/6419321 16-2.0 .945 6 21/3219328 16-1.5 .945 6 21/3219322 18-2.5 1.078 6 47/64

Thread Repair Kits


30

SH

OP

SU

PP

LIE

S

Master Repair Kit - Coarse Thread

Master Thread Repair Kits are designed for the professional mechanic. Each kit contains 30 thread repair inserts (6 of each size), 5 taps, and 5 installation tools. Fine thread kit contains 5 pre-winding tools Metric thread kit contains 3 pre-winding tools

Item ID Sizes Included# of Inserts

in Kit

191501/4-20, 5/16-18, 3/8-16,

7/16-14, 1/2-1330

Master Repair Kit - Fine Thread


in Kit

191511/4-28, 5/16-24, 3/8-24,

7/16-20, 1/2-2030

Master Repair Kit - Metric Thread


in Kit

193505-0.8, 6-1.0, 8-1.25,

10-1.25, 10-1.530

Spark Plug Repair Kit

Spark Plug Repair Kit can be used with taper seat or gasket type spark plugs. No drilling required, and works in aluminum and cast iron. This kit is easy to install and offers a permanent repair. Kit Includes:

3 Inserts (1 each of short, normal, and long) Expanding Tool Piloted Tap

Item ID Size# of

Inserts inKit

Insert Lengths

19323 14-1.25 3 3/8",1/2",3/4"

Thread Repair Kits


31

SH

OP

SU

PP

LIE

S

Thinwall Keyserts- Fractional

Thinwall Keyserts (also known as Keenserts) are constructed of carbon steel and are designed to repair damaged threads. These keyserts feature a key-locking action that prevents rotation due to vibration or torsion. May be used in a variety of materials. External thread is the same as the tap size Installed with standard drill bits & taps Suggested uses: trucks, RVs, machinery, small engines, MRO tasks and more

Item ID Size Insert Length Drill Size Tap SizeInstallation Tool

Part No.19806 10-24 .31 I 5/16-18 1990619807 10-32 .31 I 5/16-18 1990619808 1/4-20 .37 Q 3/8-16 1990819809 1/4-28 .37 Q 3/8-16 1990819810 5/16-18 .43 X 7/16-14 1991019811 5/16-24 .43 X 7/16-14 1991019812 3/8-16 .50 29/64 1/2-13 1991219813 3/8-24 .50 29/64 1/2-13 1991219814 7/16-14 .56 33/64 9/16-12 1991419815 7/16-20 .56 33/64 9/16-12 1991419816 1/2-13 .62 37/64 5/8-11 1991619817 1/2-20 .62 37/64 5/8-11 19916

Thinwall Keyserts- Metric

Item ID Size Insert Length Drill Size Tap SizeInstallation Tool

Part No.19850 5-0.8 .315 H 8-1.25 1995019852 6-1.0 .394 S 10-1.25 1995219856 8-1.25 .472 27/64 12-1.25 1995419854 8-1.0 .472 27/64 12-1.25 1995419860 10-1.5 .551 1/2 14-1.5 1995919859 10-1.25 .551 1/2 14-1.5 19959

Keyserts


32

SH

OP

SU

PP

LIE

S

Buna-N 1/16" Thickness

Buna-N O-Rings are a 70 durometer o-ring that is constructed of nitrile rubber. Operating Temp: -65° to 300° Resists wide range of solvents,

oils & fluids Suggested uses: all general

applications

Item IDIndustry

#I.D. O.D.

44003 003 1/16 3/1644006 006 1/8 1/444007 007 5/32 9/3244008 008 3/16 5/1644009 009 7/32 11/3244010 010 1/4 3/844011 011 5/16 7/1644012 012 3/8 1/244013 013 7/16 9/1644014 014 1/2 5/844015 015 9/16 11/1644016 016 5/8 3/444017 017 11/16 13/1644018 018 3/4 7/8


Item IDIndustry

#I.D. O.D.

44110 110 3/8 9/1644111 111 7/16 5/844112 112 1/2 11/1644113 113 9/16 3/444114 114 5/8 13/1644115 115 11/16 7/844116 116 3/4 15/1644117 117 13/16 144118 118 7/8 1-1/1644119 119 15/16 1-1/844120 120 1 1-3/1644121 121 1-1/16 1-1/444122 122 1-1/8 1-5/1644123 123 1-3/16 1-3/844124 124 1-1/4 1-7/1644125 125 1-5/16 1-1/244126 126 1-3/8 1-9/1644127 127 1-7/16 1-5/844128 128 1-1/2 1-11/16


Item IDIndustry

#I.D. O.D.

44210 210 3/4 144211 211 13/16 1-1/1644212 212 7/8 1-1/844213 213 15/16 1-3/1644214 214 1 1-1/444215 215 1-1/16 1-5/1644216 216 1-1/8 1-3/844217 217 1-3/16 1-7/1644218 218 1-1/4 1-1/244219 219 1-5/16 1-9/1644220 220 1-3/8 1-5/844221 221 1-7/16 1-11/1644222 222 1-1/2 1-3/444223 223 1-5/8 1-7/844224 224 1-3/4 244225 225 1-7/8 2-1/844226 226 2 2-1/444227 227 2-1/8 2-3/844228 228 2-1/4 2-1/244229 229 2-3/8 2-5/844230 230 2-1/2 2-3/444231 231 2-5/8 2-7/8


Item IDIndustry

#I.D. O.D.

44325 325 1-1/2 1-7/844326 326 1-5/8 244327 327 1-3/4 2-1/844328 328 1-7/8 2-1/444329 329 2 2-3/844330 330 2-1/8 2-1/244331 331 2-1/4 2-5/844332 332 2-3/8 2-3/444333 333 2-1/2 2-7/844334 334 2-5/8 3

Buna-N O-Ring Kit

Components:

Item ID

Ind # Qty Item ID

Ind # Qty

44006 006 20 44211 211 10 44007 007 20 44212 212 10 44008 008 20 44213 213 10 44009 009 20 44214 214 10 44010 010 20 44215 215 10 44011 011 20 44216 216 10 44012 012 20 44217 217 10 44110 110 13 44218 218 10 44111 111 13 44219 219 10 44112 112 13 44220 220 10 44113 113 13 44221 221 10 44114 114 13 44222 222 10 44115 115 13 44325 325 7 44116 116 13 44326 326 7 44210 210 10 44327 327 7

Item ID # of Pieces # of Sizes44000 382 30

O-Rings


33

SH

OP

SU

PP

LIE

S

Buna-N 2MM Thickness

Buna-N O-Rings are a 70 durometer o-ring that is constructed of nitrile rubber. Operating Temp: -65° to 300° Resists wide range of solvents,

oils & fluids Suggested uses: all general

applications

Item ID I.D.(MM) O.D.(MM)45003 3 745004 4 845005 5 945006 6 1045007 7 1145008 8 1245010 10 14

Buna-N 2.5MM Thickness

Item ID I.D.(MM) O.D.(MM)45110 10 1545111 11 1645112 12 1745114 14 1945116 16 2145117 17 2245119 19 24


Item ID I.D.(MM) O.D.(MM)45219 19 2545220 20 2645222 22 2845224 24 3045225 25 3145227 27 3345228 28 3445230 30 3645232 32 3845233 33 3945235 35 4145236 36 4245238 38 44


Item ID I.D.(MM) O.D.(MM)45338 38 4645341 41 4945344 44 52

Metric Buna-N O-Ring Kit

Components:

Item ID I.D. Qty

Item ID I.D. Qty

45003 3 16 45220 20 12 45004 4 16 45222 22 12 45005 5 16 45224 24 12 45006 6 16 45225 25 12 45007 7 16 45227 27 12 45008 8 16 45228 28 12 45010 10 16 45230 30 12 45110 10 13 45232 32 12 45111 11 13 45233 33 12 45112 12 13 45235 35 12 45114 14 13 45236 36 12 45116 16 13 45238 38 12 45117 17 13 45338 38 9 45119 19 13 45341 41 9 45219 19 11 45344 44 9


Metric O-Rings


34

SH

OP

SU

PP

LIE

S

Nitrile Air Conditioning O-Rings

Nitrile Air Conditioning O-Rings are constructed of HSN (highly saturated nitrile). Color: Green Suggested uses: for use with R12 & R134A refrigerant

Item ID I.D. O.D. Thickness OEM #46003 .290 .432 .071 Ford # 39139646004 .375 .500 .06346005 .400 .546 .073 Ford # 39139746006 .509 .655 .073 Ford # 39130446007 .617 .769 .076 Ford # 39130546008 .688 .813 .06346020 13/16 1 1/16 .125

Metric Nitrile Air Conditioning O-Rings

Item ID I.D. O.D. Thickness OEM #46009 4.5mm 7.3mm 1.4mm Nissan # 92472-N820046010 6mm 9.6mm 1.8mm Nissan # 92470-N820046011 6.5mm 9.5mm 1.5mm Toyota # 90099-1404446012 6.6mm 10.2mm 1.8mm Acura # 80873-ST7-00046013 7.7mm 11.3mm 1.8mm Nissan # 92474-N8200

46014 10.7mm 15.5mm 2.4mmAcura # 80872-ST7-000Nissan # 92475-W1000

46015 10.8mm 14.4mm 1.8mm Nissan # 92471-N820046016 13.3mm 18.1mm 2.4mm Acura # 80871-ST7-00046017 13.4mm 17.2mm 1.9mm Toyota # 90099-1404546018 14mm 17.6mm 1.8mm Nissan # 92473-N820046019 14.8mm 19.6mm 2.4mm Nissan # 92475-W2100

Nitrile Air Conditioning O-Ring Assortment

For use with R12 & R134A refrigerantAssortment includes all 18 sizes above


Air Conditioning O-Rings


35

SH

OP

SU

PP

LIE

S

U-Bolts

U-Bolts are constructed of low carbon steel and are supplied with hex nuts and straps. Zinc Plated

Item IDThread

SizeInsideWidth

InsideLength

ThreadLength

Fits PipeSize

17234 1/4-20 3/4 1-1/4 3/4 3/817235 1/4-20 3/4 1-3/4 1 3/817236 1/4-20 3/4 2-1/4 1-1/2 3/817237 1/4-20 1 1-3/4 1 1/217240 1/4-20 1-1/8 2 1 3/417241 1/4-20 1-3/8 2-1/4 3/4 117244 1/4-20 1-1/2 3-1/2 2 117242 1/4-20 1-3/4 2-3/4 1-1/4 1-1/417243 1/4-20 2 3-1/4 1-3/8 1-1/217248 5/16-18 1-3/8 2-1/2 1-1/4 117249 5/16-18 1-3/8 3-5/8 2 117250 5/16-18 1-3/4 2-11/16 1-1/8 1-1/417253 5/16-18 1-3/4 4-1/2 2 1-1/417254 5/16-18 2 2-11/16 1 1-1/217255 5/16-18 2 3-11/16 2 1-1/217256 5/16-18 2-1/2 3-3/16 1 217261 3/8-16 1 2-1/4 1-1/4 1/217263 3/8-16 1-1/2 2-1/2 1-1/4 117262 3/8-16 1-3/8 3-1/8 1-5/8 117266 3/8-16 2 3-1/8 1-1/2 1-1/217267 3/8-16 2-1/2 3-5/8 1-3/4 217268 3/8-16 3 4-1/8 1-3/4 2-1/217269 3/8-16 3-1/2 4-5/8 2 3

Turned Eye Bolts

Turned Eye Bolts are constructed of low carbon steel. Zinc Plated

Item ID DiameterOverallLength

ShankLength

ThreadLength

Eye I.D.

17304 1/4-20 2 1 7/8 9/1617305 1/4-20 2-1/2 1-1/2 1-1/4 9/1617306 1/4-20 3 2 1-3/4 9/1617307 1/4-20 3-1/2 2-1/2 1-1/4 1/217308 1/4-20 4 3 2-3/4 9/1617310 1/4-20 5 4 3 9/1617312 1/4-20 6 5 3 9/1617320 5/16-18 3-1/4 1-3/4 1-1/2 3/417324 5/16-18 4 2-1/2 2-1/4 3/417326 5/16-18 5 3-1/2 3 3/417328 5/16-18 6 4-1/2 3 3/417335 3/8-16 4 2-1/4 2 117337 3/8-16 5 3-1/4 3 117339 3/8-16 6 4-1/4 3 117343 3/8-16 8 6-1/4 3-7/8 117354 7/16-14 7-3/4 6 4 7/817358 7/16-14 9-3/4 8 4 7/817365 1/2-13 6 4 2-1/2 117369 1/2-13 8 6 4 117373 1/2-13 10 8 4 1

U-Bolts & Eye Bolts


36

SH

OP

SU

PP

LIE

S

Drop Forged Galvanized Eye Bolts

Drop Forged Galvanized Eye Bolts are constructed of drop forged, heat treated steel. The eye bolt comes furnished with a hex nut. Galvanized UNC threads tapped oversized to accommodate thick galvanized coating Working load limit is based on a design factor of 5:1

Item ID Diameter Shank Length Eye O.D. Eye I.D. Thread LengthWorking Load

Limit18000 1/4 2" 1 1/2 1-1/2 500#18010 5/16 2-1/4" 1-1/4 5/8 1-1/2 800#18014 5/16 4-1/4" 1-1/4 5/8 2-1/2 800#18020 3/8 2-1/2" 1-1/2 3/4 1-1/2 1200#18024 3/8 4-1/2" 1-1/2 3/4 2-1/2 1200#18034 1/2 3-1/4" 2 1 1-1/2 2200#

Shouldered Machinery Eye Bolts

Shouldered Machinery Eye Bolts are constructed of heat treated steel. The shoulderprovides additional strength which helps to eliminate neck breakage. Self-Colored Working load limit is based on a design factor of 5:1

Item ID Thread Size Shank Length Eye O.D. Eye I.D.Working Load

Limit17900 1/4-20 1" 1-1/4 3/4 500#17901 5/16-18 1-1/8" 1-1/2 7/8 900#17902 3/8-16 1-1/4" 1-21/32 1 1300#17903 7/16-14 1-3/8" 1-27/32 1-3/32 2000#17904 1/2-13 1-1/2" 2-1/16 1-3/16 2400#17906 5/8-11 1-3/4" 2-1/2 1-3/8 4000#17907 3/4-10 2" 2-13/16 1-1/2 5000#17908 7/8-9 2-1/4" 3-1/4 1-11/16 7000#17909 1-8 2-1/2" 3-9/16 1-13/16 9000#

Eyebolts


37

SH

OP

SU

PP

LIE

S

Nickel Plated Steel Snap

Eye Snaps are used in a wide variety of different applications including connecting rope, wire, cable, harnesses, and strapping.

Item ID Opening Size OAL17582 5/16 2-3/8"

Open Swivel Eye Snap

Item ID Opening Size OAL17583 5/16 3-3/8"

Swivel Eye

Item ID Eye Size OAL17584 1/2 1-1/4"

Solid Bronze Open Eye Snap

Item ID Eye Size OAL17579 1/2 4"

Nickel Plated Swivel Eye Snap


Nickel Plated Double Eye Snap


Snaps


38

SH

OP

SU

PP

LIE

S

Clevis Grab Hooks

Clevis Grab Hooks are drop forged and not for overhead lifting. Self-Colored High Test Grade 40

Item ID Chain SizeWorking Load

Limit17575 1/4 2600#17576 5/16 3900#17577 3/8 5400#

Spring Hooks

Spring Hooks are a low carbon steel hook used for easy chain repair and the attachment of fittings Zinc Plated

Item ID DiameterOpening

SizeLength

17538 1/4 5/16 2-3/8"17539 5/16 3/8 3-1/8"17540 3/8 1/2 4"

Quick Links

Quick Links are used as a connecting link, repair link or as an attaching device. Zinc Plated

Item ID Chain Size OALWorking

Load Limit17590 1/8 1-3/8" 130#17591 3/16 1-7/8" 400#17592 1/4 2-1/4" 600#17593 5/16 2-15/16" 800#17594 3/8 3-1/8" 1200#17595 7/16 3-1/2" 3320#17596 1/2 4-1/8" 4500

Cold Shut Links

Cold Shut Links are made of low carbon steel and used for temporary chain repair and coupling of attachments. Use one size larger than chain size for safety Weld shut after closing Zinc Plated

Item ID Chain SizeWorking Load

Limit17565 1/4 360#17566 5/16 590#17567 3/8 860#17569 1/2 1588#

Screw Pin Anchor Shackle

Screw Pin Anchor Shackles are made of drop forged carbon steel. Shackles meet design requirements of Federal Specification RR-C-271A Type IV Class 2. Hot dipped galvanized

Item ID Chain SizeOpening

SizePin

DiameterWorking

Load Limit17550 1/4 15/32 5/16 1000#17552 3/8 21/32 7/16 2000#17554 1/2 13/16 5/8 4000#17556 3/4 1-1/4 7/8 9500#

Chain Hardware


39

SH

OP

SU

PP

LIE

S

Eye x Eye Forged Turnbuckle

Eye x Eye Drop Forged Turnbuckles are constructed of drop forged material. Turnbuckles meet design and performance requires of ASTM F 1145 Class D. Hot dipped galvanized

Item ID Diameter Take-upOverallLengthClosed

WorkingLoad Limit

17400 1/4 4 7.80" 500#17404 5/16 4-1/2 9.06" 800#17408 3/8 6 11.47" 1200#17412 1/2 6 13.08" 2200#17416 5/8 6 14.68" 3500#17420 3/4 9 19.38" 5200#17424 7/8 12 23.32" 7200#17428 1 12 25.97" 10000#

Ratchet Loadbinders

Ratchet Loadbinders feature a safe, convenient folding handle that does not stick out or get in the way. Three position prawl offers ratchet extension, take-up, or free-spin settings for fast adjustment in either direction. Working load limit permanently marked on the

handle for quick reference

Item IDFor Chain

Size

WorkLoadLimit

Take UpFoldedHandleLength

17600 5/16 or 3/8 7100# 6.0 9.517610 3/8 or 1/2 12000# 6.0 9.5

Ratchet Tie Down Strap- S Hooks

Ratchet Tie Down Straps are a great way to secure loads of any height, shape and strength. Tough polyester straps are lightweight and easy to throw over any load. Never use for lifting or hoisting Hooks attached

Item ID SizeWorking Load

LimitMin BreakStrength

17615 1 x 16 400# 1200#

Heavy Duty Ratchet Tie Down Strap

Item ID SizeWorking

Load LimitMin BreakStrength

HookStyle

17618 2 x 27 3335# 10,000# Flat17620 2 x 27 3335# 10,000# Wire

Rope Ratchets

Polypropylene rope Suggested uses: larger securing loads for transport,

hoisting items, securing objects and more

Item ID Size Body SizeMax Load

LimitRope

Length17622 1/4 2-1/4 x 1-1/2 150# 8 ft17623 3/8 3-1/2 x 2 250# 8 ft17624 1/2 5 x 2-12 500# 8 ft

Chain Hardware


40

SH

OP

SU

PP

LIE

S

Vinyl Coated Galvanized Cable

Clear vinyl coating When using wire rope clips, match the clip size to the

uncoated cable size and then strip the coating from the cable.

Supplied on 250ft spools

Item ID Cable DiaCoated

DiaType

Work LoadLimit

17586 3/32 1/8 7 x 7 184#17587 3/32 3/16 7 x 7 184#

Aluminum Swage Sleeves

When properly applied, swage sleeves are capable of supporting 90% of load strength of cable to which they are attached. Aluminum

Item ID Cable Dia17597 1/1617598 3/3217588 1/817589 3/16

Combo Swager

Combo Swager can be used only for copper or aluminum sleeves and stops. Comes with cable cutter feature in swager head. Crimps 1/16, 3/32, 1/8, 5/32, 3/16 sleeves and stops Weight: 6.5lbs

Item ID17599

Wire Rope Clips

Wire Rope Clips are made of a cast iron base with steel u-bolt and nuts. These malleable wire rope clips are intended for use in making eye termination in right regular lay wire rope. Zinc Plated Not for overhead lifting

Item IDCableSize

Min # ofClips

Amount ofRope to Turn

Back inInches

Torques inFt Lbs

17500 1/16 2 4-3/4 1.517501 1/8 3 4-3/4 3.017502 3/16 3 5-1/2 4.517503 1/4 3 7 1517504 5/16 3 7-3/4 1517505 3/8 3 9-1/2 3017507 1/2 4 15-1/4 4517510 3/4 5 22-1/4 75

Wire Rope Thimbles

Wire rope thimbles are intended for light duty applications and load conditions. Meets dimensional requirements of Federal Specifications FF+-T-276B Type II. Hot dipped galvanized

Item ID Cable Size OAL17525 1/8 1.9317526 3/16 1.9317527 1/4 1.9617528 5/16 2.1217529 3/8 2.3717531 1/2 2.7517534 3/4 3.75

Wire Rope & Accessories


41

SH

OP

SU

PP

LIE

S

Ball Joint Assemblies

Ball Joint Assemblies are constructed of low carbon steel with case hardened ball studs. Dichromate for corrosion resistance

Item IDThread

SizeB C D E F G H J K

15605 10-32 7/16 7/16 1/8 3/8 5/16 7/8 15/32 1-5/32 .17715609 1/4-28 15/32 9/16 1/8 7/16 3/8 31/32 17/32 1-5/16 .20815613 5/16-24 17/32 11/16 5/32 1/2 7/16 1-1/8 19/32 1-9/16 .25015625 3/8-24 11/16 7/8 3/16 5/8 1/2 1-3/8 13/16 1-13/16 .289

Ball Joints


42

SH

OP

SU

PP

LIE

S

Male Ball Joints

Male & Female Ball Joints are constructed of low carbon steel and surface hardened for wear resistance. Reinforced nylon bearing raceway Yellow dichromate for corrosion resistance

Item ID Thread Size AA E G H J L M N15745 3/8-24 .375 1.000 1.937 1.250 2.437 .719 .406 .500

Female Ball Joints

Item ID Thread Size AA E G H J L M N15700 10-32 .189 .625 1.062 .562 1.375 .438 .250 .31215705 1/4-28 .250 .750 1.312 .750 1.687 .516 .281 .37515710 5/16-24 .3125 .875 1.375 .750 1.812 .625 .344 .43715715 3/8-24 .375 1.000 1.625 .937 2.125 .719 .406 .50015720 1/2-20 .500 1.312 2.125 1.187 2.781 .938 .500 .625

Ball Joints


43

SH

OP

SU

PP

LIE

S

Male Ball Joints with Stud

Male & Female Ball Joints with Stud are constructed of low carbon steel and surface hardened for wear resistance. Reinforced nylon bearing raceway Yellow dichromate for corrosion resistance Right hand thread

Item IDThread

SizeB C D E F G H J L

15735 1/4-28 .469 .562 .156 .750 .375 1.562 1.000 1.937 .51615740 5/16-24 .531 .687 .187 .875 .437 1.875 1.250 2.312 .62515747 3/8-24 .625 .906 .218 1.000 .500 1.938 1.250 2.437 .71915750 1/2-20 .875 1.125 .312 1.312 .625 2.438 1.500 3.094 .938

Female Ball Joints with Stud

Item IDThread

SizeB C D E F G H J L

15770 10-32 .437 .437 .156 .625 .312 1.062 .562 1.375 .43815775 1/4-28 .469 .562 .156 .750 .375 1.312 .750 1.687 .51615780 5/16-24 .531 .687 .187 .875 .437 1.375 .750 1.812 .62515785 3/8-24 .625 .875 .218 1.000 .500 1.625 .937 2.125 .71915789 7/16-20 .844 1.062 .312 1.125 .625 1.812 1.032 2.375 .81215790 1/2-20 .875 1.125 .312 1.312 .625 2.125 1.187 2.781 .938

Ball Joints


44

SH

OP

SU

PP

LIE

S

Compression Springs

Carbon steel Zinc plated Closed end construction

Item ID O.D.OverallLength

Wire Size

07144 15/64 1 .02807143 15/64 2-1/2 .03607150 15/64 2-5/8 .02607134 1/4 1-1/16 .03007145 1/4 1-1/8 .03407183 1/4 3-1/4 .02607142 17/64 2-3/8 .02607184 17/64 3-1/16 .03107124 9/32 1-7/16 .03107125 9/32 2-5/16 .02807139 9/32 2-3/8 .02807137 9/32 2-1/2 .03207151 9/32 2-11/16 .03207135 5/16 1-1/16 .03607146 5/16 1-3/8 .03207147 5/16 2 .02307138 21/64 2-1/2 .02807149 11/32 1-15/16 .03107129 23/64 1-9/32 .04707127 3/8 29/32 .03107148 3/8 1-5/32 .02807136 3/8 1-3/16 .05407123 3/8 1-1/4 .02507128 3/8 1-5/16 .04107126 13/32 1 .04707140 13/32 1-3/16 .04707132 13/32 2 .06207185 7/16 3 .04807141 31/64 1-1/4 .07207153 1/2 1-9/16 .05407152 1/2 2-1/2 .04707178 1/2 3-9/16 .05407199 1/2 5-1/2 .08007130 9/16 1-3/4 .08007181 9/16 3-1/16 .05407161 23/32 2-3/8 .09207174 23/32 4-1/4 .09107131 5/8 1-1/16 .04707196 5/8 6-3/8 .08007155 3/4 2-3/16 .06207202 13/16 10 .12507182 53/64 3 .04707172 53/64 4-1/4 .125


Wire Size

07154 29/32 1-1/16 .08007156 29/32 2-11/16 .03407201 15/16 6-7/8" .12507173 1 4-7/16 .125

Springs


45

SH

OP

SU

PP

LIE

S

Extension Springs

Carbon steel Zinc plated


Wire Size

07121 5/32 1-3/16 .02307160 3/16 2-9/16 .03107180 3/16 3-9/16 .02307119 1/4 3/4 .02807120 1/4 1-3/16 .03107122 1/4 1-13/32 .03207133 1/4 1-3/4 .03207158 1/4 1-9/16 .03107186 1/4 4-3/4 .03207177 17/64 4-1/8 .03507159 9/32 2-1/4 .02607192 5/16 2-13/16 .03607179 5/16 3-3/4 .03607188 5/16 6 .04107157 3/8 1-15/32 .03207187 3/8 5-3/16 .04707189 3/8 6-1/4 .04107190 7/16 6-3/16 .05407193 1/2 9 .05407197 5/8 2-7/8 .08007194 5/8 8-3/8 .06207198 45/64 10 .08007176 21/32 3-15/16 .09107191 23/32 3-1/4 .06207175 23/32 4-3/8 .07207162 3/4 1-3/4 .10507163 3/4 2 .10507164 3/4 2-1/4 .10507165 3/4 2-3/8 .10507166 3/4 2-5/8 .10507167 3/4 2-7/8 .10507168 3/4 3 .10507169 3/4 3-1/4 .10507170 3/4 3-13/16 .10507171 3/4 4-5/32 .10507195 3/4 7-3/8 .08007200 13/16 10-1/4 .07207203 55/64 8-1/2 .135

Carburetor Return Spring

Carbon steel Galvanized

Item IDCoil

LengthOverallLength

O.D. Wire Size

13410 2 8-1/4 7/16 1/16

Springs


46

SH

OP

SU

PP

LIE

S

Long Arm

Heat treated alloy steel Chamfered tool tips eliminate burrs and help tools

seat in screw head Made in USA

Item ID Size Length17835 1/16 317836 5/64 3-3/1617837 3/32 3-3/817838 7/64 3-9/1617839 1/8 3-3/417840 9/64 3-15/1617841 5/32 4-1/817842 3/16" 4-1/217843 7/32 4-7/817844 1/4 5-1/417845 5/16 617846 3/8 6-3/417847 7/16 7-1/217848 1/2 8-1/417849 9/16 917850 5/8 9-3/417851 3/4 11-1/4

Short Arm

Item ID Size Length17774 .050 1-19/3217775 1/16 1-3/417776 5/64 1-7/817777 3/32 217778 7/64 2-1/817779 1/8 2-1/417780 9/64 2-3/817781 5/32 2-1/217782 3/16 2-3/417783 7/32 317784 1/4 3-1/417785 5/16 3-3/417786 3/8 4-1/4

Metric

Heat treated alloy steel Chamfered tool tips eliminate burrs and help tools

seat in screw head Made in USA

Item ID Size (MM) Length 17855 0.7 1-13/6417856 0.9 1-13/6417860 1.5 1-11/1617861 2.0 1-7/817862 2.5 2-1/817863 3.0 2-3/817865 4.0 2-5/817866 5.0 3-1/817867 6.0 3-1/217868 7.0 3-11/1617869 8.0 3-7/817871 10.0 4-5/1617873 12.0 4-3/4

Cushion Grip T-Handle

Heat treated alloy steel Solid steel handles Ergonomic handle design Made in USA

Item ID SizeHandleWidth

Length

18403 3/32 3 6"18404 7/64 3 6"18405 1/8 3 6"18406 9/64 3 6"18407 5/32 3 6"18408 3/16 4 6"18409 7/32 4 6"18410 1/4 4 6"18411 5/16 5 6"18412 3/8 5 6"

Hex Key Wrenches


47

SH

OP

SU

PP

LIE

S

Metal Fold Up Hex Key Sets

Item ID Description17880 3/16, 7/32, 1/4, 5/16, 3/8 (5pc)

178855/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16,

7/32, 1/4 (9pc)

GorillaGrip Fold Up Hex Key Sets

Item ID Description17881 5/64 - 1/4 Hex (9pc)17891 2mm - 8mm Hex (7pc) 17888 T6 - T25 Torx (8pc) 17889 T9 - T40 Torx (8pc)

L-Wrench Sets

Item ID Description Length17831 .050 - 3/8 (13pc) Long Style17854 1.5mm - 10mm (9pc) Long Style

ProHold Balldriver L-Wrench Sets

ProHold button holts screw tight on the tool everytime

Ball end design


Ball End L-Wrench Sets


Stubby Ball End L-Wrench Sets


Cushion Grip T-Handle Sets

Comes with stand Item ID Description Length18400 3/32 - 3/8 (10pc) 3-5"18450 2mm - 10mm (8pc) 3-5"18460 T9 - T40 Torx (8pc) 3-5"

Hex Key Sets


48

SH

OP

SU

PP

LIE

S

Rubber Tarp Straps

Rubber Tarp Straps are constructed of natural rubber which offers superior stretch performance. Comes with a heavy duty steel crimped hook. These straps have a low temperature performance with flexibility up to -40°F.

Item ID Strap Length Flexed Length13300 9" 17-19"13301 15" 24-26"13302 21" 30-34"13303 31" 43-48"13304 41" 53-58"

"S" Hook

Galvanized

Item ID Wire Dia Length13350 3/16 3"

Hanger Strapping- Galvanized

1/4” round mounting holes Galvanized

Item ID Width Length15250 3/4 10ft

Yellow Polypropylene Rope

3-strand twisted Sold by the roll

Item ID Size Roll LengthWorking

Load17585 1/4 600ft 110#

Mechanics Wire

Black annealed wire

Item ID Wire Gauge Roll15201 14 2 lb15205 14 5 lb15202 16 2 lb15206 16 5 lb15203 18 2 lb15207 18 5 lb

Utility


49

SH

OP

SU

PP

LIE

S

Tapered Polyethylene Round Caps

For Unthreaded Pipe

Tapered Polyethylene Caps & Plugs are designed to fit a wide range of applications and protect from contaminants and debris. Material: low density polyethylene Color: Red

Item ID Pipe Size Fits OD Caplug #14705 1/8 .356 - .422 T-414712 1/4 .487 - .568 T-6X14717 3/8 .613 - .693 T-8X14722 1/2 .780 - .849 T-1114729 3/4 .933 - 1.083 T-13X14737 1 1.249 - 1.402 T-16

For NPT Threaded Pipe

Item ID Pipe Size Fits OD Caplug #14705 1/8 .356 - .422 T-414710 1/4 .468 - .548 T-614717 3/8 .613 - .693 T-8X14722 1/2 .780 - .849 T-1114729 3/4 .933 - 1.083 T-13X14734 1 1.173 - 1.298 T-15X14742 1-1/4 1.498 - 1.620 T-1814746 1-1/2 1.718 - 1.888 T-20

For Hydraulic Fittings

Item IDThread

SizeFits OD Caplug #

14700 5/16-24 .235 - .302 T-214704 3/8-24 .327 - .394 T-3X14706 7/16-20 .385 - .451 T-4X14707 3/8 .471 - .547 T-514712 9/16-18 .487 - .568 T-6X14713 5/8-18 .518 - .605 T-714720 3/4-16 .663 - .761 T-9X14723 7/8-14 .753 - .868 T-11X14729 1-1/16-12 .933 - 1.083 T-13X14734 1-5/16-12 1.173 - 1.298 T-15X14742 1-5/8-12 1.498 - 1.620 T-1814746 1-7/8-12 1.718 - 1.888 T-20

Tapered Polyethylene Round Plugs

For Unthreaded Pipe

Item ID Pipe Size Fits ID Caplug #14698 1/8 .236 - .302 T-114702 1/4 .330 - .396 T-2X14707 3/8 .471 - .547 T-514713 1/2 .580 - .667 T-714721 3/4 .750 - .848 T-1014728 1 .964 - 1.090 T-1314737 1-1/4 1.312 - 1.465 T-1614742 1-1/2 1.560 - 1.682 T-18

For NPT Threaded Pipe

Item ID Pipe Size Fits ID Caplug #14702 1/8 .330 - .396 T-2X14705 1/4 .419 - .485 T-414712 3/8 .550 - .631 T-6X14718 1/2 .690 - .788 T-914726 3/4 .915 - 1.040 T-12X14730 1 1.094 - 1.215 T-1414741 1-1/4 1.513 - 1.600 T-17S

For Hydraulic Fittings

Item IDThread

SizeFits ID Caplug #

14698 5/16-24 .236 - .302 T-114700 3/8-24 .299 - .365 T-214703 7/16-20 .361 - .427 T-314705 1/2-20 .419 - .485 T-414707 9/16-18 .471 - .547 T-514710 5/8-18 .532 - .608 T-614715 3/4-16 .640 - .727 T-814721 7/8-14 .750 - .848 T-1014726 1-1/16-12 .915 - 1.040 T-12X14731 1-5/16-12 1.175 - 1.284 T-14X14741 1-5/8-12 1.513 - 1.600 T-17S14744 1-7/8-12 1.750 - 1.880 T-19

Tapered Polyethylene Caps and Plugs

Item ID Fits ID Fits OD Caplug #14733 1.224 - 1.355 1.161 - 1.292 T-1514740 1.447 - 1.600 1.384 - 1.537 T-17

Caps & Plugs


50

SH

OP

SU

PP

LIE

S

Tapered Caps and Plugs- Thick Flange

Tapered Caps & Plugs- Thick Flange features a wide, thick flange which prevents unnecessary force in an opening when used as a plug. Accepted by the aircraft industry Material: low density polyethylene Color: Yellow

Item IDTube

Size IDFits ID (A-B)

Fits OD(C-D)

Caplug #

14673 5/16 .299 - .365 .235 - .302 WW-214675 3/8 .367 - .418 .298 - .354 WW-314679 1/2 .500 - .563 .440 - .500 WW-5X14681 5/8 .530 - .615 .468 - .547 WW-6X14683 3/4 .755 - .870 .693 - .808 WW-1014685 7/8 .867 - .975 .805 - .913 WW-1214687 1 .984 - 1.105 .919 - 1.04 WW-13

Steel Plug Buttons- Nickel Plated

Item ID Hole Size14604 1/414610 3/814614 1/214616 5/814618 3/414620 7/814622 114624 1-1/414626 1-1/2

Plastic Plug Buttons- Recessed

Item ID Hole Size Head Dia14650 1/2 7/814652 3/4 1-5/3214654 7/8 1-1/414656 1 1-3/814658 1-1/4 1-5/814660 1-1/2 1-7/8

Caps & Plugs


51

SH

OP

SU

PP

LIE

S

Razor Blade Scraper

Razor Blade Scraper features an ergonomically engineered shape for a better grip and more precise control. Large ribbed control button for safer operation 1 blade included- for replacement blades use #13101

Item ID13100

Fold-Up Razor Scraper

Fold-Up Razor Scraper is a unique retractable scraper that takes the aggravation out of getting old stickers off car windshields and paint blotches off windows. 7-7/8” when fully opened and locked in place Blade can be folded 180° into handle Replacement blades #13101

Item ID13103

Carton Cutter

Carton Cutter features a metal frame that holds a single-edge razor blade. Suggested uses range from slitting boxes to cutting a wide variety of materials. Blade retracts for safety 1 blade included- for replacement blades use #13101

Item ID13107

Utility Knife

Utility Knife features a full metal construction with a fully retractable blade. On board safety storage Blade locks in 3 different positions 3 blades included- for replacement blades use

#13105, or 13106

Item ID13104

Heavy Duty Utility Knife

Heavy Duty Utility Knife features a powder-coated metal construction. Top-slide push button blade adjustment On board safety storage Blade has 9 different cutting positions 1 blade included- for replacement blades use

#13105, or 13106

Item ID13109

Autoloading Utility Knife

Autoloading Utility Knife features a zinc die-cast and powder coated handle. The auto-loading feature enables blade change in seconds. Just remove the blade from the front, and then retract the slider into the handle. 5 blade storage compartment For replacement blades use # 13105, or 13106

Item ID13114

Razor Blades & Accessories


52

SH

OP

SU

PP

LIE

S

Auto-Lock 8-Point Utility Knife

Auto-Lock 8-Point Utility Knife features an automatic locking slide button that keeps the blade securely in place. This ergo designed snap-off knife offers extreme comfort. 3 blade-on-board storage compartment 3 blades included- for replacement blades use #13112

Item ID13110

8-Point Replacement Blade

8-Point Replacement Blades are an 18mm snap-off blade that can be used on most other knives requiring 18mm blades. Qty 1= 5pack

Item ID Pack Qty For Use With13112 5 13110

Auto-Lock 13-Point Utility Knife

Auto-Lock 13-Point Utility Knife features an automatic locking slide button that keeps the blade securely in place. This ergo designed snap-off knife offers extreme comfort. 3 blade-on-board storage compartment 3 blades included- for replacement blades use #13113

Item ID13111

13-Point Replacement Blade

13-Point Replacement Blades are a 9mm snap-off blade that can be used on most other knives requiring 9mm blades. Qty 1= 5pack

Item ID Pack Qty For Use With13113 5 13111

Utility Blades

Utility Blades are constructed of carbon steel, precision ground for durability and sharpness.

2-notch blade design fits all knives *Comes in dispenser pack

Item ID Pack Qty For Use With13106 5 13104, 13109, 1311413105* 100 13104, 13109, 13114

Stanley 1991 Utility Blades

Stanley 1991 Utility Blades feature an extra heavy duty steel construction. Designed for use in fixed blade knives only.

2-notch blade design *Comes in dispenser pack

Item ID Pack Qty For Use With13168 5 13104, 1310913169* 100 13104, 13109

Lenox Gold Utility Blades

Lenox Gold Utility Blades are constructed of bi-metal, high speed steel edge with a titanium coating. This blade keeps cutting after others have quit.

Bi-metal construction allows blades to bend and flex without breaking

Fits all standard utility knives *Comes in dispenser pack

Item ID Pack Qty For Use With13806 5 13104, 13109, 1311413807* 50 13104, 13109, 1311413808* 100 13104, 13109, 13114

Razor Blades & Accessories


53

SH

OP

SU

PP

LIE

S

Single Edge Razor Blade-Steel

Single Edge Razor Blades- Steel feature a steel backed single edge blade that is precision ground for great durability.

Can be used in a variety of applications Qty 1= 100pack

Item ID Pack Qty13101 100

Single Edge Razor Blade-Plastic

Single Edge Razor Blades- Plastic can be used on painted surfaces, chrome, or any hard finish where scratching by a metal blade is a problem.

Fits standard holders Qty 1= 100pack

Item ID Pack Qty for Use With13102 100 13100, 13103, 13107

Putty & Joint Knives

Putty & Joint Knives are constructed with a high carbon steel blade and a durable nylon handle.

Full-tang blade Metal grommet hang hole

Item IDBladeWidth

Description Type

13205 1-1/4" Stiff Putty13206 1-1/2" Stiff Putty13204 2" Flexible Putty13208 3" Flexible Joint13210 4" Flexible Joint

Chisel Scraper & Joint Knife

Chisel Scraper & Joint Knife are constructed with a high carbon steel blade. Durable nylon handle with Hammer Head end for setting popped drywall nails and screws.

Full-tang blade Metal grommet hang hole

Item ID Blade With Description Type13207 3" Stiff Chisel13209 5" Flexible Joint

Razor Blades & Scrapers


54

SH

OP

SU

PP

LIE

S

Paint Roller Cover

Heavy Duty 100% synthetic fiber 4-ply phenolic core backing

Item ID Length Nap13260 4" 1/213262 9" 1/2

Paint Roller Handle

1/4” chrome plated steel frame 4 wire cage and reinforced handle socket

Item ID Size13250 4"13252 9"

Paint Tray

Item ID Size13265 9"

Tin Handle Acid Brush

Stiff black horsehair

Item ID Overall Length Bristle Length13245 6" 3/4

Parts Cleaning Brush

Polypropylene bristle Plastic handle with hang up hole

Item ID Overall Length Trim Length13235 10-1/2" 2-3/4

Chip Brush

100% white bristles with single thickness Smooth sanded handle with tin ferrule

Item ID Size Box Qty13225 1 3613226 1-1/2 3613227 2 2413228 2-1/2 2413229 3 2413230 4 12

Spray Bottles

Item ID Description13295 Nozzle only for 1329613296 32oz Spray Bottle w/Nozzle13299 28oz Spray Bottle w/Nozzle

Paint Accessories & Brushes


55

SH

OP

SU

PP

LIE

S

Wire Hand Brushes

Item IDBlockSize

Rows ofWire

HandleWire

Material13239 14 x 1 3 x 19 Curved Stainless13240 14 x 1 3 x 19 Curved Steel13241 10 x 1 4 x 16 Shoe Steel

Wire Toothbrushes

Item ID LengthTrim

LengthHandle

WireMaterial

13242 7" 1/2 Wood Stainless13243 7" 1/2 Wood Brass13244 7" 1/2 Plastic Nylon

Crimped Wire Cup Brushes

Ideal for working on large surfaces Used for the removal of rust, paint, dirt and scale Crimped wire is excellent for polishing and surface

preparation prior to paint or plating

Item ID SizeWireSize

WireType

MaxRPM

13172 2-3/4 x 5/8-11 .012 Steel 14,00013174 2-3/4 x M10-1.25 .014 Steel 14,000

Knot Wire Cup Brushes

For heavy duty use Removal of rust, slag, weld scale or concrete waste Preparing metal surfaces prior to painting


WireType

MaxRPM

13173 2-3/4 x 5/8-11 .020 Steel 14,00013175 2-3/4 x M10-1.25 .020 Steel 14,00013180 6 x 5/8-11 .020 Steel 6,500

Wire Brushes


56

SH

OP

SU

PP

LIE

S

Crimped Wire End Brush

1/4” mandrel Used to clean or finish in restricted areas

Item ID Size Wire Size Wire Type Max RPM13185 3/4 .014 Steel 20,000

Knot Wire End Brush

1/4” mandrel Used to clean welds and heavy contaminants

Item ID Size Wire Size Wire Type Max RPM13186 3/4 .014 Steel 20,000

Crimped Wire Circular Brush

1/4” mandrel Used to clean or finish in restricted areas and also general

purpose use

Item ID Size Wire Size Wire Type Max RPM13188 3" .012 Stainless 15,000

Crimped Wire Flared Brushes

1/4” mandrel Flared end Excellent for use in cleaning and finishing recessed areas

or pipes


TrimLength

Wire TypeMaxRPM

13187 1-1/2 .012 5/16 Steel 20,00013189 3 .014 7/8 Stainless 25,000

Wire Wheel Brushes

For removal of rust, paint and dirt Excellent for deburring, stripping, polishing or applying a

scratch pattern *Comes with multi bore bushings


FaceWidth

ArborWireType

MaxRPM

13190* 6" .014 3/4 5/8* Steel 6,00013191* 6" .008 1/2 5/8* Steel 6,00013193* 8" .014 3/4 5/8* Steel 6,000

Wire Brushes


57

SH

OP

SU

PP

LIE

S

Grinding Wheel Type 27- Hi-Performance

Hi-Performance Grinding Wheels are constructed of a combination of ceramic alumina and zirconia alumina. This wheel performs up to 10x better than a standard aluminum oxide wheel giving it the lowest total grinding cost and highest productivity.

Type 27 depressed center Suggested uses: steel, stainless steel and all other ferrous

metals

Item ID Sizes Max RPM Box Qty13131-NN 4-1/2 x 1/4 x 7/8 13,580 25

Grinding Wheel Type 27

Grinding Wheels are constructed of aluminum oxide and areused with angle grinders. This is a great general purpose wheel.

Type 27 depressed center Suggested uses: steel and ferrous metals

Item ID Sizes Max RPM Box Qty13130 4 x 1/4 x 5/8 15,280 2513131 4-1/2 x 1/4 x 7/8 13,580 5013133 4-1/2 x 1/4 x 7/8 13,580 2513137 4-1/2 x 1/4 x 5/8-11 13,580 1013135 7 x 1/4 x 5/8-11 8,600 10

Grinding Wheel Type 27- Aluminum

Aluminum Grinding Wheels are constructed of aluminum oxide and do not contain wax or rubber fillers.

Type 27 depressed center Suggested uses: grinding aluminum and soft metals

Item ID Size Max RPM Box Qty13132 4-1/2 x 1/4 x 7/8 13,580 25

Bench Grinding Wheels

Bench Grinding Wheels are constructed of aluminum oxide for most roughing and finishing operations. These wheels provide fast cutting action along with a relatively good finish.

Comes with 5/8 & 1/2 bushings Suggested uses: for soft steels and tool steel

Item ID Size Grit13170 6 x 3/4 x 1 A-36 Coarse13171 6 x 3/4 x 1 A-60 Medium13176 8 x 1 x 1 A-36 Coarse13177 8 x 1 x 1 A-60 Medium13178 8 x 1 x 1 A-80 Medium

Bench Grinding Wheels- Green Silicone

This bench grinding wheel is constructed of green silicone carbide abrasive grain for sharpening carbide tool bits and other carbide applications. They are cool cutting and provide an excellent finish.

Comes with 5/8 & 1/2 bushings Suggested uses: carbide applications

Item ID Size Grit13179 8 x 1 x 1 A-100 Extra Fine

Abrasives


58

SH

OP

SU

PP

LIE

S

Cut Off Wheels Type 1- Hi-Performance

Hi-Performance Cut Off Wheels are constructed of a combination of ceramic alumina and zirconia alumina. This wheel performs 3x-10x better than a standard aluminum oxide wheel on carbon steel, stainless and cast iron. Up to 3x faster cutting compared to aluminum oxide wheels.

Type 1 flat Suggested uses: steel, stainless steel and all ferrous

metals

Item ID Size Max RPM Box Qty13118-NN 3 x 1/16 x 3/8 25,465 25

Cut Off Wheels Type 1- Performance

Performance Cut Off Wheels are constructed of quality, versatile aluminum oxide which provides consistent performance.

Type 1 flat Suggested uses: alloys, metals, steels and ferrous metals

Item ID Size Max RPM Box Qty13128 3 x .035 x 1/4 25,465 2513126 3 x 1/16 x 1/4 25,465 2513120 3 x 1/16 x 3/8 25,465 2513119 4 x 1/16 x 3/8 19,100 2513123 4-1/2 x .045 x 7/8 13,580 25

Cut Off Wheel Mandrel

For 3/8” & 1/4” bore wheels

Item ID Arbor Hole Shank13115 3/8 1/4

Cut Off Wheels Type 1

Cut Off Wheels are constructed of quality aluminum oxide. Type 1 flat Suggested uses: alloys, metals, steels and ferrous metals

Item ID Size Max RPM Box Qty13148 3 x .035 x 3/8 25,465 2513118 3 x 1/16 x 3/8 25,465 10013116 4 x .035 x 3/8 19,100 2513117 4 x 5/64 x 5/8 15,270 1013122 4-1/2 x 1/16 x 7/8 13,580 2513127 6 x .040 x 7/8 10,185 25

Cut Off Wheels Type 1- 3M

3M Cut Off Wheels are constructed of premium grade abrasives and last longer than standard aluminum oxide wheels.


Item ID SizeMaxRPM

Box Qty 3M #

13121 3 x 1/16 x 3/8 28,000 5 01990

Cut Off Wheels Type 27

Cut Off Wheels are constructed of quality aluminum oxide. Type 27 depressed center Suggested uses: alloys, metals, steels and ferrous metals

Item ID Size Max RPM Box Qty13149 4-1/2 x .045 x 7/8 13,580 2513134 5 x .045 x 7/8 12,225 25

Abrasives


59

SH

OP

SU

PP

LIE

S

Chop Saw Wheels- Hi-Performance

Hi-Performance Chop Saw Wheels are constructed of zirconia alumina and aluminum oxide abrasives. These wheels have 2x the life of a regular aluminum oxide wheel and are reinforced.

Type 1 flat Suggested uses: steel, stainless steel and all other ferrous

metals

Item ID Size Max RPM Box Qty13125-NN 14 x 7/64 x 1 4,365 10

Chop Saw Wheels

Chop Saw Wheels are constructed of high performance aluminum oxide and are side reinforced.


Item ID Size Max RPM Box Qty13124 12 x 7/64 x 1 5,095 513125 14 x 3/32 x 1 4,365 5

Abrasives


60

SH

OP

SU

PP

LIE

S

Flap Discs- Hi-Performance

Hi-Performance Flap Discs are constructed of premium ceramic and zirconia alumina abrasive. This disc features a quick trim flexible plastic backing.

Type 27 flat Suggested uses: mild carbon steel and ferrous metals

Item ID Size GritMaxRPM

Box Qty

13159 4-1/2 x 7/8 40 13,300 1013152 4-1/2 x 7/8 120 13,300 10

Flap Discs- Performance

Performance Flap Discs are constructed of zirconia alumina abrasive. This disc features a quick trim flexible plastic backing.

Type 27 flat Suggested uses: mild carbon steel, and welds


Box Qty

13150 4-1/2 x 7/8 60 13,300 1013151 4-1/2 x 7/8 80 13,300 10

Flap Discs- High Density

High Density Flap Discs are constructed of alternating aluminum oxide and zirconia alumina flaps. This disc features a fiberglass backing.

Type 27 flat – high density Suggested uses: aluminum, brass, bronze, stainless,

carbon steel and more *Standard density, quick trim plastic backing


Box Qty

13153 4-1/2 x 7/8 36 13,300 1013155 4-1/2 x 7/8 60 13,300 1013156 4-1/2 x 7/8 80 13,300 1013157* 4-1/2 x 7/8 120 13,300 10

Flap Discs- 5/8-11 Arbor

Performance Flap Discs are constructed of zirconia alumina abrasive. This disc features a quick trim flexible plastic backing.

Type 27 flat 5/8-11 Threaded Arbor Suggested uses: mild carbon steel, and welds

*Constructed of alternating aluminum oxide and zirconia alumina flaps


Box Qty

13161 4-1/2 x 5/8-11 36 13,300 1013162 4-1/2 x 5/8-11 40 13,300 1013163 4-1/2 x 5/8-11 60 13,300 1013164 4-1/2 x 5/8-11 80 13,300 1013165* 4-1/2 x 5/8-11 120 13,300 10

Abrasives


61

SH

OP

SU

PP

LIE

S

Flap Discs- Mini Performance

Mini Performance Flap Discs are constructed of zirconia alumina abrasive. This disc features a heavy duty plastic backing.

Type R roll on Use with #13570 (2”) or 13571 (3”) disc holder Suggested uses: mild carbon steel, and welds

Item ID Size Grit Max RPM Box Qty13560 2" 36 30,000 1013561 2" 40 30,000 1013562 2" 60 30,000 1013563 2" 80 30,000 1013564 2" 120 30,000 1013565 3" 36 20,000 1013566 3" 40 20,000 1013567 3" 60 20,000 1013568 3" 80 20,000 1013569 3" 120 20,000 10

Flap Wheels

Flap Wheels are constructed of aluminum oxide abrasive. These wheels feature a good cut rate and life.

Mounted shank Suggested uses: blending, deburring, finishing and other

applications


Box Qty

13136 3/4 x 3/4 x 1/8 80 35,000 1013143 1 x 1 x 1/4 60 30,000 1013139 1 x 1 x 1/4 80 30,000 1013144 1 x 1 x 1/4 120 30,000 1013138 1-1/2 x 1 x 1/4 80 25,000 1013140 2 x 1 x 1/4 60 25,000 1013141 2 x 1 x 1/4 80 25,000 1013142 2 x 1 x 1/4 120 25,000 10

Silicon Carbide Sandscreen

Silcon Carbide Sandscreen is a waterproof mesh material that is non-loading, washable and reusable.

Suggested uses: sanding pvc pipe and other applications

Item ID Size Grit49600 1-1/2" x 25 yds 18049602 1-1/2" x 25 yds 12049604 1-1/2" x 25 yds 80

Abrasives


62

SH

OP

SU

PP

LIE

S

Emery Cloth- Premium

Premium Emery Cloth is constructed of aluminum oxide abrasive which is bonded to a J-weight cloth backing.

Excellent durability Suggested uses: general purpose sanding applications

Item ID Size Grit49656 1" X 50 yds 8049655 1" X 50 yds 10049654 1" X 50 yds 12049652 1" X 50 yds 18049650 1" X 50 yds 22049646 1" X 50 yds 32049644 1" X 50 yds 40049666 1-1/2" X 50 yds 8049665 1-1/2" X 50 yds 10049664 1-1/2" X 50 yds 12049663 1-1/2" X 50 yds 18049662 1-1/2" X 50 yds 24049661 1-1/2" X 50 yds 32049660 1-1/2" X 50 yds 40049659 2" X 50 yds 8049658 2" X 50 yds 120

Emery Cloth- Economy

Emery Cloth is constructed of aluminum oxide abrasive. Suggested uses: general purpose sanding applications

Item ID Size Grit49612 1" X 50 yds 8049613 1" X 50 yds 10049614 1" X 50 yds 12049615 1" X 50 yds 15049616 1" X 50 yds 18049617 1" X 50 yds 22049618 1" X 50 yds 24049623 1-1/2" X 50 yds 8049624 1-1/2" X 50 yds 10049625 1-1/2" X 50 yds 12049626 1-1/2" X 50 yds 15049627 1-1/2" X 50 yds 18049628 1-1/2" X 50 yds 22049629 1-1/2" X 50 yds 240

Emery Cloth- Wright Pack

Emery Cloth Wright Pack is a 3 roll spool and is constructed of aluminum oxide abrasive with a J-weight cloth.

Suggested uses: general purpose sanding applications

Item ID Size Grits Included49670 1" x 25 yds 80,120,180

Abrasives


63

SH

OP

SU

PP

LIE

S

Roloc Discs- Green Corps

Green Corp Roloc Discs are constructed of a high performance aluminum oxide abrasive and are green in color.

Type R quick change Use with #49767 (2”) and #49768 (3”) disc holders Suggested uses: paint, rush, weld removal and more

Item ID Size Grit Box Qty 3M #49731 2" 24 25 0139849727 2" 36 25 0139749728 2" 50 25 0139649732 3" 24 25 0140849733 3" 36 25 0140749730 3" 50 25 01406

Roloc Discs- Alum Oxide

Aluminum Oxide Roloc Discs are constructed with an aluminum oxide abrasive.

Type R quick change Use with #13570 (2”) and #13571 (3”) disc holders Suggested uses: general purpose metalworking

applications

Item ID Size Grit Box Qty49729 2" 100 100

Roloc Discs- Clean & Strip

Clean and Strip Roloc Discs are constructed of extra course aluminum oxide abrasives. Three dimensional abrasive web conforms to work area. Safer than wire bristle tools.

Type R quick change Use with #SP1-7500 (4”) disc holders Suggested uses: aggressively removing paint and rust

from seams, door jambs, drip moldings, pinchwelds and other difficult-to-reach areas

Item ID Size Thickness Grit 3M #49777 4" 1/2 Course 07466

Fibre Disc- Green Corps

Green Corp Fibre Discs are constructed of ceramic abrasives and are green in color.

Sold as 1 pack of 20 Suggested uses: paint, rust, weld removal and metal work

Item ID Size Grit Qty 3M #49675 5" 24 1 pack of 20 0191549674 5" 36 1 pack of 20 01914

Abrasives


64

SH

OP

SU

PP

LIE

S

Surface Conditioning Discs Type R- 3M

3M Surface Conditioning Discs are constructed of non-woven nylon fiber impregnated with premium aluminum oxide abrasive grain.

Type R twist on Use with #49767 (2”) and #49768 (3”) disc holders Suggested uses: removing gasket residue, removing

scratches, flashing, oxidation and rust from metal surfaces

Item ID Size Grade ColorBoxQty

3M #

49763 2" Coarse Brown 25 0748049766 2" Medium Maroon 25 0748149779 2" Very Fine Blue 25 0751549764 3" Coarse Brown 25 0748549769 3" Medium Maroon 25 0748649776 3" Very Fine Blue 25 07513

Roloc Disc Holders- 3M

Item ID Size Shank49767 2" 1/449768 3" 1/4

Surface Conditioning Discs Velcro- 3M

3M Surface Conditioning Discs are constructed of non-woven nylon fiber impregnated with premium aluminum oxide abrasive grain.

Velcro Use with #49750, #49751, and #49752 disc holders Suggested uses: removing gasket residue, removing

scratches, flashing, oxidation and rust from metal surfaces

Item ID Sizer Grade ColorBoxQty

3M #

49755 2" Coarse Brown 25 0745349756 2" Medium Maroon 25 0745749758 3" Coarse Brown 25 0745549759 3" Medium Maroon 25 0745649761 4" Coarse Brown 10 0745049762 4" Medium Maroon 10 07451

Velcro Disc Holders- 3M

Item ID Size Shank49750 2" 1/449751 3" 1/449752 4" 1/4

Abrasives


65

SH

OP

SU

PP

LIE

S

Surface Conditioning Discs Type R

Surface Conditioning Discs are constructed of non-woven nylon fiber impregnated with aluminum oxide abrasive grain.

Type R twist on Use with #13570 (2”) and #13571 (3”) disc holders Suggested uses: rust, oxidation, blending, finishing and

general purpose preparation prior to painting or plating

Item ID Size Grade Color Box Qty13731 2" Coarse Brown 5013728 2" Medium Maroon 5013729 2" Very Fine Blue 5013732 3" Coarse Brown 2513730 3" Medium Maroon 2513734 3" Very Fine Blue 25

Surface Conditioning Discs Type R- HD

HD Surface Conditioning Discs are constructed of a high performance ceramic grain. These heavy duty discs cut faster, last longer and provide a better finish than conventional discs.

Type R twist on Use with #13570 (2”) and #13571 (3”) disc holders Suggested uses: deburring, cleaning, blending and

finishing applications

Item ID Size Grade Color Box Qty13736 2" Coarse Brown 5013737 2" Medium Maroon 5013738 3" Coarse Brown 2513739 3" Medium Maroon 25

Disc Holders Type R

Item ID Size Shank13570 2" 1/413571 3" 1/4

Roloc Bristle Discs

Roloc Bristle Discs are constructed of ceramic abrasive grain blended with aluminum oxide and molded into flexible bristles. These provide more surface contact than wire brushes. These bristles conform to contours to produce consistent finishes.

Type R twist on Use with #49767 (2”) and #49768 (3”) disc holders Suggested uses: stripping, deburring, blending , finishing,

polishing, cleaning and removing coatings

Item ID Size Grade Color Box Qty 3M #49736 2" 50 Green 10 0752449735 2" 80 Yellow 10 0752549737 3" 50 Green 10 0752649738 3" 80 Yellow 10 07527

Abrasives


66

SH

OP

SU

PP

LIE

S

Hand Pads Gray- 3M

3M Gray Hand Pads combine the durability for long life, flexibility for reaching tight areas, and can be used in place of steel wool for conditioning metal surfaces and paint prep. These pads will not shred during use or leave fine metal splinters.

Sold as 1 box of 20 Silicon carbide abrasive material 3M # 07448 Suggested uses: cleaning, blending, prepping and

finishing on metal, wood, plastics and composites

Item ID Size Grade Color Box Qty49760 6 x 9 Ultra Fine Gray 1 bx of 20

Hand Pads Maroon- 3M

3M Maroon Hand Pads combine flexibility with effective cutting action and precise hand control to accomplish tough cleaning jobs or produce fine finishing results. Very fine grade abrasives cut fast and fine, leaving a smooth, finished surface.

Sold as 1 box of 20 Aluminum oxide abrasive material 3M # 07447 Suggested uses: cleans, finishes, grains, denibs, and

defuzzes on wood, metal, plastics, ceramics, porcelain, glass, rubber, and composites

Item ID Size Grade Color Box Qty

49765 6 x 9Gen

PurposeMaroon 1 bx of 20

Hand Pads Green

Green Hand Pads are non-woven pads that conform to irregular work surfaces.

Sold as 1 pack of 10 Aluminum oxide abrasive material Suggested uses: heavy duty hand scouring on a wide

variety of surfaces

Item ID Size Grade Color Qty49778 6 x 9 Scouring Green 1 pk of 10

Steel Wool

Steel Wool is ideal for most household chores, hobbies and projects. This handy size is just the right amount for small jobs.

Item ID Size Description Qty49770 0000 Super Fine 1 pk of 1649771 000 Extra Fine 1 pk of 1649772 00 Very Fine 1 pk of 1649773 0 Fine 1 pk of 1649774 1 Medium 1 pk of 1649775 3 Coarse 1 pk of 16

Abrasives


67

SH

OP

SU

PP

LIE

S

Duct Tape

Polycoated cloth industrial duct tape Excellent adhesion to a wide variety of surfaces Suggested uses: demanding HVAC, moisture control,

upholstery repair and other maintenance jobs

Item ID Width Length Mil Thick Color Box Qty49000 2" 60 yds 11 Silver 2449001 2" 60 yds 11 Black 2449002 2" 60 yds 7.5 Silver 24

Masking Tape- Gen Purpose

Crepe paper backing, coated with rubber based adhesive Suggested uses: general purpose maintenance use for

noncritical applications

Item ID Width Length Box Qty49010 3/4" 60 yds 4849011 1" 60 yds 3649012 2" 60 yds 24

Masking Tape Green- 3M

Superior green masking tape designed for auto refinishers Highly-conformable tape that provides the best adhesive

transfer resistance Sticks at a touch and stays put Suggested uses: multiple applications

Item ID Width Length Box Qty 3M #49702 3/4" 60 yds 48 2633449704 1" 60 yds 24 2633649708 2" 60 yds 12 26340

PTFE Thread Sealant Tape

Made of virgin white PTFE Low density and nonflammable Meets Federal Spec T-27730A Suggested uses: multi-purpose for use on a wide range of

threaded pipe

Item ID Size49045 1/2" X 260"49046 3/4" X 260"

PTFE Thread Sealant Tape- 3M

Made of 3-mil thick PTFE Rated to 500°F Provides a leak-proof seal Suggested uses: multi-purpose for use on a wide range of

threaded pipe

Item ID Size Box Qty49047 1/2" X 260" 12

Tape


68

SH

OP

SU

PP

LIE

S

Packing Tape Clear

Clear poly Hot melt 1.9 mil thickness

Item ID Width Length Box Qty49020 2" 55 yds 3649022 2" 110 yds 36

Packing Tape Clear- 3M

Clear Hot melt adhesive 3.1 mil thickness 47 lb/in tensile strength

Item ID Width Length Box Qty49111 2" 60 yds 36

Packing Tape Dispenser

Item ID Size49100 2" Dispenser

Filament Strapping Tape

110# fiberglass reinforced filament Excellent adhesion to corrugated cartons Suggested uses: packaging, palletizing and unitizing

applications

Item ID Width Length Box Qty49005 3/4" 60 yds 48

Tape


69

SH

OP

SU

PP

LIE

S

Automotive Attachment Tape- 3M

Good peel and shear adhesion and internal strength Good conformability and good plasticizer resistance .030” (30 mil) thick gray acrylic foam Suggested uses: lightweight applications such as vehicle

nameplates and trim including narrow and light body side moldings

Item ID Width Length Box Qty 3M #49500 1/2" 20 yds 12 0637749502 7/8" 20 yds 12 06378

Application Squeegee

Used when applying automotive films Flexible Sold as 1 pack of 5

Item ID Color Qty49716 Blue 1 pack of 5

Floor Mats

Protects customer vehicles from greasy, oil shoes Paper Sold as 1 box of 500

Item ID Size Qty/Box49719 17" x 22" 500

Seat Covers- HD

Heavy Duty Slip-N-Grip technology allows the product to stay in

place while the technician enters and exits Sold as 1 roll of 200

Item ID Size Qty/Roll49718 32" x 13" x 43" 200

Tape & Auto Accessories


70

SH

OP

SU

PP

LIE

S

Electrical Tape- 7 Mil

Flame retardant All purpose UL approved

Item ID Type Roll Size Pack Qty49030 Economy 3/4" x 60 ft 1049032 Highland 3M 3/4" x 66 ft 10

Electrical Tape- Premium

7 Mil thickness (49031) 8.5 Mil thickness (49034) Both conform to all surfaces Both have excellent resistance to abrasion, moisture,

solvents, oils and many acids 49034 can handle splices up to 600 volts Both UL approved & Made in USA

Item ID Type Roll Size Pack Qty49031 Super 33+ 3M 3/4" X 66 ft 1049034 Super 88 3M 3/4" X 66 ft 10

Linerless Rubber Splicing Tape

Linerless, self-bonding, and insulating tape Flame retardant and weather resistant Provides immediate moisture seals and void-free buildup

Item ID Roll Size49036 3/4" X 15 ft

Electrical Moisture Sealant Tape

Self-fusing, rubber-based thin insulating mastic compound laminated to a flexible, all-weather grade PVC backing

Designed for moisture sealing and insulating of electrical connections up to 600 volts

Item ID Roll Size Pack Qty49551 2-1/2" X 10 ft 10

Glass Cloth Electrical Tape

7-Mil woven insulating glass cloth tape with pressure-sensitive rubber thermosetting adhesive

Designed to operate in 600 volt dry applications requiring high mechanical strength and resistance to high temp

Item ID Roll Size Pack Qty49038 1/2" X 66 ft 1049039 3/4" X 66 ft 10

Liquid Electrical Tape

Application heat range is from 0-240°F Flexible vinyl

Item ID Can Size49035 4 oz

Electrical Tape


71

SH

OP

SU

PP

LIE

S

Mirage Safety Glasses

Sleek, lightweight design offers a comfortable fit Protective polycarbonate lens provides impact resistance Meets ANSI Z87.1+ standards

Item ID Description Box Qty19994 Clear 1219995 Smoke 1219996 Silver Mirror 12

Rad-Sequel Safety Glasses

Rubber tipped temples provide a secure fit Soft, rubber nose piece allows for all day comfort Polycarbonate lens provides impact resistance Meets ANSI Z87.1+ standards

Item ID Description Box Qty19870 Clear 1219871 Smoke 1219874 Indoor/Outdoor 12

Rad-Sequel Bi-Focal Safety Glasses

Magnification diopter molded directly into lens Soft, rubber nose piece allows for all day comfort Polycarbonate lens provides impact resistance Meets ANSI Z87.1+ standards

Item ID Description Diopter Box Qty19881 Clear 1.5 1219882 Clear 2.0 12

Journey Safety Glasses

4-position telescoping temples for superior fit Rubber nose piece allows for all day comfort All lenses are hard coated for scratch resistance Meets ANSI Z87.1+ standards

Item ID Description Box Qty19997 Clear 1219998 Smoke 1219999 Silver Mirror 12

RPG Safety Glasses

Fits a wide range of users Full Frame Meets ANSI Z87.1+ standards

Item ID Description Box Qty19898 Silver Mirror Lens - Red Frames 1219899 I/O Lens - Pearl Gray Frames 12

AR3 Safety Glasses

Designed for all environments Features an adjustable nosepiece, ultralight frame 100% visually correct lenses Meets ANSI Z87.1+ standards

Item ID Description Box Qty19894 Blue Mirror Lens - White Frames 1219896 HD Brown Lens - Camo Frames 12

Safety


72

SH

OP

SU

PP

LIE

S

Resistor 32 Earplugs

Tapered bullet shape Offers comfortable fit for virtually any ear canal Extremely soft foam Meets ANSI S3. 19-1974 standards NRR 32 dB

Item ID Description Qty19958 Uncorded 1 pair19961 Uncorded 1 box of 200 pairs19964 Corded 1 pair19960 Corded 1 box of 100 pairs

Detour 32 Earplugs

Comfortable wing shape Extremely soft foam plug Made in USA Meets ANSI S3. 19-1974 standards NRR 32 dB

Item ID Description Qty19968 Uncorded 1 box of 200 pairs19969 Corded 1 box of 100 pairs

Jelli Snug Earplugs

Super soft Jelli snug plugs are washable and reusable FDA approved materials are non-toxic Made in USA NRR 28 dB

Item ID Description Qty19967 Uncorded 1 pair19963 Uncorded 1 box of 200 pairs19966 Corded 1 pair19962 Corded 1 box of 100 pairs

Particulate Respirators- 3M

Part # 49739 features the 3M cool flow exhalation valve Both masks feature an adjustable M-nose clip Suggested uses: grinding, sanding, buffing and more

Item ID Box Qty Case Qty 3M #49740 1 box of 20 8 07048/821049739 1 box of 10 8 07185/8511

Safety Walk Tape- 3M

For light to heavy shoe-traffic areas- Black, mineral-coated, high friction slip-resistant surface Low-profile design helps reduce trip hazard

Item ID Roll Size19975 4" X 30 ft19976 4" X 60 ft

Safety


73

SH

OP

SU

PP

LIE

S

Eye Wash Station

For replacement bottles use part # 19822

Item ID Description Size19821 2-16 oz bottles 16"h x 12"w x 4"d

Eye Wash

Replacement Eye Wash With extended flow nozzle

Item ID Size19823 4 oz19822 16 oz

Lens Cleaning Towelettes

Cleans lenses, prevents fogging, and reduces static Great for cleaning glass, polycarbonate & plastic lenses Sold by the box

Item ID Wipe Size Box Qty19820 5" x 7" 100 wipes

Lens Cleaning Station

Comes in a heavy duty box Will clean greasy and oily glasses while providing an

anti-fog/ anti-static coating

Item ID Description19965 8 oz Solution - 600 Tissues

Safety


74

SH

OP

SU

PP

LIE

S

Hi-Viz Short Sleeve T-Shirts

High visibility green with black bottom Max-dri moisture wicking mesh technology provides max

breathability. Front pocket 2” Silver reflective tape Meets Type R Class 2 ANSI Imprinting available

Item ID Size19711 Large19712 X-Large19713 XX-Large

Hi-Viz Bomber Jackets

3-in-1 deluxe bomber jacket with black bottom Has a zip out fleece jacket, concealed attached hood,

elasticized waistband and several inner and outer pockets 2” Silver reflective tape Meets Class 3 ANSI Imprinting available

Item ID Size19841 Large19842 X-Large19843 XX-Large

Safety


75

SH

OP

SU

PP

LIE

S

Brown Jersey Gloves

Cotton/Polyester construction is breathable Economy weight Brown color hides the dirt and extends the wear

Item ID Size Pkg Qty19990 Men’s 12

Double Sided PVC Dotted Gloves

Seamless knit shell is comfortable and flexible Double-sided PVC dots provide enhanced grip and extra

cut and abrasion resistance Suggested uses: warehousing and package handling,

general assembly, light duty general work, and more

Item ID Size Pkg Qty19940 Small 1219941 Large 12

Smitty Palm Coated Glove

Seamless knit construction has no seams to rub or chafe Nitrile coated palm provides added grip as well as

abrasion resistance Used in construction, manufacturing, municipal services

and transportation

Item ID Size Pkg Qty19988 Medium 12

Gloves


76

SH

OP

SU

PP

LIE

S

Premium Split Cowhide Welders Gloves

Premium bourbon brown/pearl side split cowhide 14” length Insulated with cotton/foam lined Double reinforced thumb

Item ID Size Pkg Qty19942 Large 12

Polar Fleece Winter Work Glove

Rugged cowhide split palm Soft, comfortable and warm camo polar fleece with lining Elastic wrist for snug fit, keeps out the cold Suggested uses: many outdoor applications where you are

being exposed to cold weather


Leather Palm Gloves

Constructed of B/C grade shoulder split cowhide Wing thumb Gunn cut pattern delivers excellent durability, wear and

comfort Suggested uses: construction, material handling and

general maintenance

Item ID Size Pkg Qty19933 Medium 1219934 Large 1219935 X-Large 12

Leather Palm Gloves- HD

Constructed of B grade shoulder split cowhide Double palm offers comfort, insulation & heat protection Wing thumb increases comfort in open-handed work Gunn cut pattern delivers excellent durability, wear and

comfort Suggested uses: construction, metalworking, general

maintenance, warehousing and other medium duty jobs


Gloves


77

SH

OP

SU

PP

LIE

S

Leather Drivers Gloves- Keystone Thumb

Top grain cowhide leather construction Keystone thumb is ergonomic, reduces hand fatigue,

offers superior dexterity and durability Suggested uses: construction, machine operation, light

duty welding, utility work, farming, roping and more


Leather Drivers Gloves- Straight Thumb

Top grain cowhide leather construction Straight thumb increase comfort in closed-fisted work Suggested uses: construction, machine operation, light

duty welding, utility work, farming, roping and more

Item ID Size Pkg Qty19983 Medium 1219984 Large 12

Leather Drivers Glove- Thinsulate Lined

Premium grain pigskin Keystone thumb and roll cuff 3M Thinsulate lined Suggested uses: construction, utility work, farming,

roping and other jobs that are exposed to cold weather

Item ID Size Pkg Qty19919 Small 1219920 Medium 1219921 Large 1219922 X-Large 12

Top Grain/Split Cowhide Drivers Gloves

Top grain pearl cowhide palm, bourbon cowhide split leather back

Keystone thumb Suggested uses: construction, utility work, farming,

roping and other jobs


Gloves


78

SH

OP

SU

PP

LIE

S

Top Grain & Goatskin Mechanics Gloves

Top grain gold/pearl goatskin double palm and thumb Double reinforced finger tips A clute cut design improves finger and thumb mobility Suggested uses: construction, automotive, and other

general maintenance applications

Item ID Size Pkg Qty19936 Medium 1219937 Large 1219938 Extra Large 12

Goatskin Mechanics Gloves

All black, top grain goatskin construction Leather and spandex design will outlast and outperform

all-synthetic high dexterity gloves Reinforced thumb to protect severe stress areas Suggested uses: construction, automotive, and other

general maintenance applications


Gloves


79

SH

OP

SU

PP

LIE

S

Latex Coated Lined Gloves- Hi Viz

Seamless construction for a comfortable fit Acrylic gloves provide decent cold weather protection Latex “crinkle” coating provides superior grip in wet/dry

conditions and offers abrasion resistance Hi-viz coloring makes this product very easy to see Suggested uses: refrigerated areas, utilities, food

processing, commercial fishing, construction and more

Item ID Size Pkg Qty19944 Large 1219945 X-Large 12

Latex Coated Gloves

10 gauge light blue polyester shell Blue “crinkle” latex palm coating Seamless elastic slip-on cuff Extra grip and durability Suggested uses: utilities, construction and more


Foam Dipped Nitrile Gloves

Blended nylon/spandex shell- foam nitrile dipped palm Elastic slip-on cuff Meets EN 388:2003 standards for abrasion, cuts, tear and

puncture Suggested uses: construction, manufacturing, assembly,

shipping and more


Cut-Resistant Gloves

13 gauge high performance polyethylene (HPPE) Polyurethane palm dip provides protection from abrasion

in wet or dry conditions Seamless design provides a comfortable fit Cut Level 3 Suggested uses: construction, automotive, metal

fabrication, glass manufacturing and more


Gloves


80

SH

OP

SU

PP

LIE

S

Latex Disposable Gloves

5 mil disposable latex glove- lightly powdered Non-sterile, micro-textured Ambidextrous 100 gloves per box- sold by the box– 10 boxes per case

Item ID Size Box Qty19986 Large 1 box of 100

Black Nitrile Disposable Gloves

Black disposable nitrile glove- powder free Textured/ micro-roughened Latex free Ambidextrous 100 gloves per box- sold by the box– 10 boxes per case

Item ID Size Qty19989 Medium 1 box of 10019991 Large 1 box of 10019992 X-Large 1 box of 10019993 XX-Large 1 box of 100

Orange Nitrile Disposable Gloves- HD

HD orange disposable nitrile glove- powder free Raised diamond texture for a great grip Latex free Ambidextrous 100 gloves per box- sold by the box– 10 boxes per case

Item ID Size Qty19989O Medium 1 box of 10019991O Large 1 box of 10019992O X-Large 1 box of 10019993O XX-Large 1 box of 100

Gloves


81

SH

OP

SU

PP

LIE

S

Magic Scrubs Cleaning Wipes

Magic Scrubs Cleaning Wipes are a multi-purpose, pre-moistened cleaning towel. They are a two sided towel that has an abrasive side for tough jobs and a smooth side for delicate jobs. This towel will remove grease, oil, dirt, tar, asphalt, brake dust, water based inks and grime.

Suggested uses: nonporous/nonabsorbent surfaces including all metal surfaces, equipment, vinyl, and more

Item ID Container Size Case Qty29113 70 towels 6

Scrubs Hand Cleaning Towels

Scrubs Hand Cleaning Towels combine an advanced cleaning formula with a strong, dual-textured towel to thoroughly clean hands and surfaces anywhere, anyplace, anytime. The clean, citrus-formula loosens and dissolves industrial soils while leaving your hands free from dryness and irritation.

No sticky residue left behind and no rinsing required

Item ID Container Size Case Qty29117 30 towels 629118 72 towels 6

Sun Skeeter Insect Repellent + SunscreenWipes

Sun Skeeter Insect Repellent + Sunscreen Wipes are the first and only premoistened wipe to combine the power of DEET with sunscreen protection and are EPA registered and safe to use. These wipes are premeasured so the user is assured they are applying the right amount of the key ingredients to provide safe and effective protection.

Greaseless formula 20% DEET and SPF 25

Item ID Pkg Qty29119 1 wipe29120 1 box of 100 wipes

Towels


82

SH

OP

SU

PP

LIE

S

General Purpose Wipers

Ideal for all medium-duty general purpose wiping jobs Works like cloth, soft on hands and face Dispenser box can dispense from either top or bottom Compare to WYPALL L40 Made in USA

Item ID Sheet Size Box Qty Case Qty Color29115 8.5" x 16.5" 100 8 White

Shop Towels-6 Pack

Ideal for general shop, industrial or home garage jobs Blue color helps hide grease and grime better than white Compare to SCOTT Shop Towels Sold in a 6-pack Made in USA

Item ID Sheet Size Roll Qty QtyCaseQty

Color

29141 11" x 9.4" 60 1 pk of 6 4 pks Blue

Shop Towels- Jumbo Roll

Ideal for general shop, or industrial applications Blue color helps hide grease and grime better than white Compare to WYPALL L40 wipers Sold in a roll- for dispensers see next page Made in USA

Item ID Sheet Size Roll Qty Qty Color29145 12.5" x 12" 692 1 Roll Blue

Bucket Wipers- Blue Shop Towels

Ideal for medium-duty wiping applications Ideal for general shop or industrial applications Compare to WYPALL L40 Buckets are perfect for jobs outside or wet work sites as it

is designed to keep your towels both clean and dry *29144 is the refill but can be used as a stand alone

center-pull dispenser Made in USA

Item ID Sheet SizeBucket

QtyCase Qty Color

29143 10" x 12" 200 2 Blue29144* 10" x 12" 200 6 Blue

Bucket Wipers- Red HD Towels

Ideal for heavy-duty wiping applications Absorbs up to 400% more than most rental rags Compare to WYPALL X90 Buckets are perfect for jobs outside or wet work sites as it

is designed to keep your towels both clean and dry *29131 is the refill but can be used as a stand alone

center-pull dispenser Made in USA

Item ID Sheet SizeBucket

QtyCase Qty Color

29130 10" x 12" 140 2 Red29131* 10" x 12" 140 6 Red

Towels


83

SH

OP

SU

PP

LIE

S

Waterweave HD Wipers

Ideal for use in wiping applications using solvents, rough surfaces or needing low lint

Polypropylene and cellulose fiber reinforced Compare to WYPALL X80 Sold per pack (29134) and box (29133) Made in USA

*Designed to fit in vending machines

Item ID Sheet Size Roll Qty Case Qty Color29134* 12.5" x 13" 30 16 Red29133 9.5" x 16.5" 140 2 Red

Waterweave HD Wipers- Jumbo Roll

Ideal for use in wiping applications using solvents, rough surfaces or needing low lint

Polypropylene and cellulose fiber reinforced Compare to WYPALL X80 Sold in a roll Made in USA

Item ID Sheet Size Roll Qty Color29132 12.5" x 13" 475 Red

Jumbo Roll Dispenser

Constructed of metal making them extremely durable Dispensers allow you to easily grab one sheet at a time 29150 comes with mounting hardware

Item ID Description29150 Wall Mount29151 Floor Stand

Towels


84

SH

OP

SU

PP

LIE

S

Center-Pull Towels

High capacity white center-pull towels fit many center pull dispensers allowing for quick and easy dispensing

2 Ply – 3” tear away core Use with dispenser # SP1-S906 Qty 1 = case of 6 rolls

Item ID Size Roll Qty Case Qty Color29153 7.6" x 10" 600 6 White

Center-Pull Towels- Scott

SCOTT center-pull towels have absorbency pockets that absorb a lot of water very quickly, for great hand drying

2 Ply – 3” tear away core Qty 1 = case of 4 rolls

Item ID Size Roll Qty Case Qty Color29124 8" x 15" 500 4 White

Absorbent Pads- Gen Purpose

General purpose medium-duty absorbent pads absorb both oil and water as well as diesel fuel, grease, transmission fluid, hydraulic fluid, coolants, and many other fluids

29137 absorbs up to 30.3 gallons of oil & 29138 absorbs 45.5 gallons of oil per bale

25% more absorbent than New PIG MAT 203 & 35% more absorbent than SPC MRO100 per pad

Made in USA Qty 1 = box of 200 pads (29137) and 1 roll (29138)

*29138 are perforated every 19” across and down the center of the length of the roll

Item ID Size Pkg Qty Color29136 15" x 19" 5 sheets Gray29137 15" x 19" 100 sheets Gray29138 28.5" x 125ft* 1 roll Gray

Absorbent Pads- Oil Only

Light weight oil only sorbent pads are ideal for soaking up oil, fuel, grease, transmission fluid, coolants, and many other liquids except water

Made of meltblown polypropylene allowing them to handle the toughest outdoor environments

Absorbs up to 32 gallons of oil per bale Made in USA Qty 1 = bag of 200 pads

Item ID Size Pkg Qty Color29123 15" x 18" 200 White

Towels


85

shop supplies - neia nfcneiafasteners.com/catalog/shopsupplies.pdfball joint assemblies 41 ball...

Documents