shop drawing review - mkc associates, inc. · tyton joint is u.s. pipe's trademark for pipe...

5
Architecture - Engineering - Planning www.mkcinc.com Mansfield, Ohio New Philadelphia, Ohio Powell, Ohio 419-525-1102 - phone 330-364-8871 - phone 740-657-3202 - phone 419-525-1428 - fax 330-343-3075 - fax 740-657-1717 - fax SHOP DRAWING REVIEW REVIEWED FURNISH AS CORRECTED REVISE AND RESUBMIT REJECTED SUBMIT SPECIFIED ITEM Date: Dave Lay By: 10-17-2011 Comments: This review is only for general conformance with (1) the design concept and (2) the information given in the construction documents. Corrections or comments made on a shop drawing during this review do not relieve the contractor from compliance with the requirements of the plans and specifications. Approval of a specific item does not include approval of an assembly of which the item is a component. The contractor remains responsible for: dimensions to be confirmed and correlated at the job site; information that pertains solely to the fabrication process or to the means, methods, techniques, sequences and procedures of construction; coordination of the Work with that of all other trades; and performing all Work in a safe and satisfactory manner. File Name: 331000-2 Ductile Iron Pipe Class 52

Upload: nguyendan

Post on 06-May-2018

216 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: SHOP DRAWING REVIEW - MKC Associates, Inc. · TYTON JOINT is U.S. Pipe's trademark for pipe with a push-on type connection. Simplicity, ... When joint restraint is required for push-on

Architecture - Engineering - Planning www.mkcinc.com

Mansfield, Ohio New Philadelphia, Ohio Powell, Ohio 419-525-1102 - phone 330-364-8871 - phone 740-657-3202 - phone 419-525-1428 - fax 330-343-3075 - fax 740-657-1717 - fax

SHOP DRAWING REVIEW

REVIEWEDFURNISH AS CORRECTEDREVISE AND RESUBMITREJECTEDSUBMIT SPECIFIED ITEM

Date:Dave LayBy: 10-17-2011

Comments:

This review is only for general conformance with (1) the design concept and (2) the informationgiven in the construction documents. Corrections or comments made on a shop drawing duringthis review do not relieve the contractor from compliance with the requirements of the plans andspecifications. Approval of a specific item does not include approval of an assembly of whichthe item is a component. The contractor remains responsible for: dimensions to be confirmed andcorrelated at the job site; information that pertains solely to the fabrication process or to themeans, methods, techniques, sequences and procedures of construction; coordination of theWork with that of all other trades; and performing all Work in a safe and satisfactory manner.

File Name:

331000-2 Ductile Iron Pipe Class 52

Page 2: SHOP DRAWING REVIEW - MKC Associates, Inc. · TYTON JOINT is U.S. Pipe's trademark for pipe with a push-on type connection. Simplicity, ... When joint restraint is required for push-on
Page 3: SHOP DRAWING REVIEW - MKC Associates, Inc. · TYTON JOINT is U.S. Pipe's trademark for pipe with a push-on type connection. Simplicity, ... When joint restraint is required for push-on
Page 4: SHOP DRAWING REVIEW - MKC Associates, Inc. · TYTON JOINT is U.S. Pipe's trademark for pipe with a push-on type connection. Simplicity, ... When joint restraint is required for push-on
Page 5: SHOP DRAWING REVIEW - MKC Associates, Inc. · TYTON JOINT is U.S. Pipe's trademark for pipe with a push-on type connection. Simplicity, ... When joint restraint is required for push-on