1+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com

We proudly serve as Pratt & Whitney’s preferred manufacturer of designed, built, tested and qualified Shipping Stands for the entire PurePower® Geared Turbofan™ engine family!

SHIPPINGSTANDS

OEM-APPROVED FOR GTF ENGINES

Shipping Stand for PW1500G Engines (used on Airbus A220 Aircraft)Pratt & Whitney P/N: PWA115185 AGSE P/N: AGSE-E240-G01

Shipping Stand for PW1900G Engines (used on Embraer E190-E2 & E195-E2 Aircraft)AGSE P/N: AGSE-E277-G01

Shipping Stand for PW1200G (used on Mitsubishi SpaceJet M90 & M100 Aircraft)

& PW1700G (used on Embraer E175-E2 Aircraft)AGSE P/N: AGSE-E276-G01

Shipping Stand for PW1100G Engines

(used on Airbus A320neo FAM Aircraft) & PW1400G Engines (used on Irkut MC-21 Aircraft)

Pratt & Whitney P/N: PWA211430 AGSE P/N: AGSE-E262-G02

2+1.562.906.9300 | www.agsecorp.com | sales@agsecorp.com

• Air shipment (with engine installed) capability on main decks of most wide-body aircraft*

• Bootstrap adapters support engine during removal/installation from/to Shipping Stand or aircraft

• Tie-Down rings on Transportation Base offer secure retainment for both engine & Shipping Stand

• Shock-absorbing mounts cushion vibrations during transport

• Storage compartments accommodate bootstrap adapters as well as steering, tow & caster lift bars

• Solutions for OEM-specific operations also available

• PWA211430 (AGSE-E262-G02) Shipping Stand includes:

• A hydraulic system to position Shipping Cradle up/down for better air shipment accommodation on height-restricted freighters

• Front forklift pocket blockers to prevent damage to fan case when Shipping Cradle is in lowered position

Our trusted & reliable transportation and storage solutions not only offer low total cost of ownership, but an extensive range of applications

that can benefit any airline, aircraft hangar, or engine shop:

*AGSE Shipping Stands are designed and built in compliance with the specifications and requirements of the engine’s original equipment manufacturer (OEM). The customer is solely responsible for selecting the appropriate packaging based upon all information at his/her disposal, including the specific application, regulatory compliances, product compatibility, shipping requirements, and documentation issued by the Engine OEM. Any AGSE-referenced shipping information presented either in this product literature or other AGSE documentation is intended as general guidance only and should not be considered a complete set of shipping requirements that can alter, satisfy, or influence both regulatory and Engine OEM shipping requirements. The content found in AGSE marketing materials and other documentation is subject to change; AGSE accepts no liability for loss or damage resulting from changes, errors, omissions, or misinterpretations of these AGSE publications.

SHIPPING STAND APPLICATIONS BY PART NUMBERP&W AGSE

PART NUMBER:

P&W ENGINE(S) ACCOMMODATED

AIRCRAFT APPLICATION(S)

PWA211430AGSE-E262-G02

PW1100G Airbus A320neo FAM

PW1400G Irkut MC-21

PWA115185AGSE-E240-G01

PW1500G Airbus A220

AGSE-E277-G01 PW1900G Embraer E190-E2, E195-E2

AGSE-E276-G01

PW1200G Mitsubishi SpaceJet M90, M100

PW1700G Embraer E175-E2

OEM-APPROVED FOR GTF ENGINESSHIPPING STAND APPLICATIONS

©2020 AGSE-Westmont Industries. All rights reserved. R.12.22.20