shenzhen shuangmusanlin electronics co., ltd....shenzhen bctc technology co., ltd. report no.:...

Shenzhen BCTC Technology Co., Ltd. Report No.: BCTC-FY161206185S

Test Report Tel: 400-788-9558 0755-33019988 Web: Http://www.bctc-lab.com.cn of 13

Shenzhen Shuangmusanlin Electronics Co., Ltd.

Prepared For : Shenzhen Shuangmusanlin Electronics Co., Ltd.

8th Floor, B6 Building, Jun Feng Industrial Park, Fuyong town, BaoAn District , Shenzhen, China

Product Name: Audio Power Amplifier(Built-in headphone amplifier)

Trademark: SMSL , VMV

Model:

SA-50 SA-50 plus, SA-36A Pro, SA-36A plus, SA-98E, SA-98E plus, SA-60,SA-60 plus, SA-70, SA-70 plus, SA-160, SA-160 plus, Q5 PRO, A1, A2, A3, A5, AD13, AD15 ,AD16, AD18

Prepared By: Shenzhen BCTC Technology Co., Ltd.

NO.101, Yousong Road, Longhua New District, Shenzhen, Guangdong P.R.China

Test Date: Dec. 08, 2016

Date of Report: Dec. 09, 2016

Report No.: BCTC-FY161206185S



TEST REPORTEN 60065

Audio, video and similar electronic apparatus-Safety requirements

Testing Laboratory Name ................ : Shenzhen BCTC Technology Co., Ltd.

Address ............................................ : NO.101, Yousong Road, Longhua New District, Shenzhen, Guangdong P.R.China

Testing location ............................... : Shenzhen BCTC Technology Co., Ltd.

Applicant's Name ............................. : Shenzhen Shuangmusanlin Electronics Co., Ltd.

Address ............................................ : 8th Floor, B6 Building, Jun Feng Industrial Park, Fuyong town, BaoAn District , Shenzhen, China

Manufacturer …………… …………: Shenzhen Shuangmusanlin Electronics Co., Ltd.

Address ………………… ………… : 8th Floor, B6 Building, Jun Feng Industrial Park, Fuyong town, BaoAn District , Shenzhen, China

Test specification

Standard ........................................... : Clause 9.1.1.1 of EN 60065: 2014

Test procedure ............................... : Commissioning test

Procedure deviation ......................... : N/A

Non-standard test method ............... : N/A

Test Report Form

Test Report Form No. ....................... : IEC60065L

Test Report Form(s) Originator .... : Intertek Semko AB

Master TRF ...................................... : Dated 2014-08

Copyright © 2014 IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System). All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context.

If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed.

Test item description ....................... : Audio Power Amplifier(Built-in headphone amplifier)

Trademark ....................................... : SMSL , VMV

Model and/or type reference ............ : SA-50

Rating(s) ........................................... : 24VDC, 5A External power adapter(Input: 100-240VAC, 47-63Hz, 2.2A, Output: 24VDC, 5A)

Test case verdicts

Test case does not apply to the test object ... : N/A

Test item does meet the requirement ............ : P(ass)

Test item does not meet the requirement ...... : F(ail)



General remarks

This report shall not be reproduced except in full without the written approval of the testing laboratory.

The test results presented in this report relate only to the item(s) tested.

”(see remark #)" refers to a remark appended to the report.

"(see Annex #)" refers to an annex appended to the report.

Clause numbers between brackets refer to clauses in EN 60065:2014

Throughout this report a comma is used as the decimal separator.

Brief description of the test sample:

The equipment is an Audio Power Amplifier(Built-in headphone amplifier for general use.

General product information:

1, These series appliances are Audio Power Amplifier(Built-in headphone amplifier , They are with the similar construction and circuit theory, The differences among them are name of model and apperance, All tests were conducted at the model of SA-50. The test results comply with the requirement of the relevant standards.

2, external power adapter(Input: 100-240VAC, 47-63Hz, 2.2A, Output: 24VDC, 5A) is approved.

Artwork of marking plate:

Audio Power Amplifier(Built-in headphone amplifier)

Model: SA-50

24VDC, 5A

Shenzhen Shuangmusanlin Electronics Co., Ltd. Made in China



EN 60065

9 Electric shock hazard under normal operating conditions P

9.1 Testing on the outside P

9.1.1 General P

9.1.1.1 Requirements P

Accessible parts shall not be hazardous live P

Inaccessible terminals are not accessible or comply with relevant requirements

P

For voltages >1000 V ac or >1500 V dc complies with clause 13.3.1 for basic insulation

No such high voltage N/A

9.1.1.2 Determination of hazardous live parts P

a) Open circuit voltages For metal enclosure:Vpeak: 188V.

For output terminal : Vpeak 190V.

P

b) Touch current measured from terminal devices using the network in annex D .................................:

For metal enclosure:

U1: max.2.12V(Limit: 35V)

U2: max.0.12V(Limit: 0.35V)

For output terminal :

U1: max.2.38V(Limit: 35V)

U2: max.0.17V(Limit: 0.35V)

P

c) Discharge not exceeding 45 μC N/A

d) Energy of discharge not exceeding 350 mJ N/A

9.1.1.3 Test with test finger and test probe Test finger and test probe cannot touch hazardous parts.

P

9.1.2 No hazardous live shafts of knobs, handles or levers No such knobs, handles or levers

N/A

9.1.3 Ventilation holes and other holes tested by means of 4 mm x 100 mm test pin

N/A

9.1.4 Terminal devices tested with 1 mm x 20 mm test pin (10 N); test probe D of IEC 61032

N/A

Terminal devices tested with 1 mm x 100 mm straight wire (1 N); test probe D of IEC 61032

N/A

9.1.5 Pre-set controls tested with 2.5 mm x 100 mm test pin (10 N); test probe C of IEC 61032

No such controls N/A

9.1.6 Withdrawal of the mains plug External power adapter is approved

N/A

No shock hazard due to stored charge on withdrawal of the mains plug; voltage (V) after 2 s :

N/A

Bleeder resistor(s) comply with 14.2 or no shock hazard when open circuited

N/A



EN 60065

If C is not greater than 0,1 μF no test needed N/A

9.1.7 Resistance to external forces Hazardous live parts not accessible during the tests and no damage after the tests.

P

a) Test probe 11 of IEC 61032 for 10 s (50 N) 50 N for 10s applied and no any hazard.

P

b) Test hook of fig. 4 for 10 s (20 N) 20 N force directed outwards, is applied for 10s at all points where this is possible, no hazard.

P

c) 30 mm diameter test tool for 5 s (100 or 250 N) 100 N force applied P

9.2 No hazard after removing a cover by hand Tools are required N/A



ANNEX A: Photo-documentatio

Test Photo 1

Test Photo 2



Test Photo 3

Test Photo 4



Test Photo 5

Test Photo 6



EUT Photo 1

EUT Photo 2



EUT Photo 3

EUT Photo 4



EUT Photo 5

EUT Photo 6



EUT Photo 7

EUT Photo 8

※※※※※ END OF REPORT ※※※※※

shenzhen shuangmusanlin electronics co., ltd....shenzhen bctc technology co., ltd. report no.:...

Documents