91-003690-000 US

Parent’s GuideThis guide contains important information. Please keep it for future reference.

Shapes & Music Castle TM

2

INTRODUCTION Thank you for purchasing the LeapBuilders® Shapes & Music Castle™ set.

This interactive building set comes with 10 double-sided learning blocks and 20 building pieces, including an electronic Smart Star™ cube. Insert the learning blocks into the interactive Smart Star™ cube to learn about shapes, musical instruments and objects. Inspire open-ended creativity and stacking fun with all the pieces.

On/Off/Volume Control Switch

Music Button

Question Button

Smart StarTM Cube

3

INCLUDED IN THIS PACKAGE• One Interactive Smart Star™ Cube

• 19 Non-Electronic Building Pieces

4

• 10 Double-Sided Learning Blocks

Front

Back

• One booklet of building ideas• One parent’s guide

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cord and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE: Please keep this parent's guide as it contains important information.

5

ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.

NOTE : Il est conseillé de conserver ce guide des parents car il comporte des informations importantes.

GETTING STARTEDBATTERY INSTALLATION1. Make sure the unit is turned OFF.

2. Locate the battery cover on the back of the unit. Use a screwdriver to loosen the screw.

3. Instal l 2 new AAA batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance).

4. Replace the battery cover and tighten the screw to secure.

Unlock the packaging locks:

Rotate the packaging lock 90 degrees counterclockwise.

1

2 Pull out the packaging lock and discard.

6

BATTERY NOTICE• Use new alkaline batteries for maximum performance.• Use only batteries of the same or equivalent type as

recommended.• Do not mix different types of batteries: alkaline, standard

(carbon-zinc) or rechargeable, or new and used batteries. • Do not use damaged batteries.• Insert batteries with the correct polarity.• Do not short-circuit the battery terminals.• Remove exhausted batteries from the toy. • Remove batteries during long periods of non-use. • Do not dispose of batteries in fire.• Do not charge non-rechargeable batteries. • Remove rechargeable batteries from the toy before charging

(if removable). • Rechargeable batteries are only to be charged under adult

supervision.

MISE EN GARDE• Utiliser des piles alcalines neuves pour des performances

maximales.• Seules des piles du type recommandé doivent être utilisées.• Ne pas mélanger différents types de piles ou d’accumulateurs,

ne pas mélanger des piles ou des accumulateurs neufs avec des usagés.

• Ne pas utiliser des piles ou des accumulateurs endommagés.• Mettre en place les piles ou les accumulateurs en respectant

les polarités + et –.• Ne pas mettre les bornes d’une pile ou d’un accumulateur

en court-circuit (en reliant directement le + et le –).• Enlever les piles ou les accumulateurs usagés du jouet.• Retirer les piles ou les accumulateurs en cas de non-utilisation

prolongée.• Ne les jeter ni au feu ni dans la nature.• Ne pas tenter de recharger des piles non rechargeables. • Enlever les accumulateurs du jouet pour les recharger.• Les accumulateurs ne doivent être chargés que sous la

surveillance d’un adulte.

7

PRODUCT FEATURES1. On/Off/Volume Control Switch To turn the unit On, slide the On/

Off/Volume Control Switch to the Low Volume or High Volume

position. To turn the unit Off, slide the On/Off/Volume Control Switch to the Off position.

2. Automatic Shut Off

To preserve battery life, the LeapBuilders® Shapes & Music Castle™ set will automatically shut off after approximately 90 seconds without input. The unit can be turned on again by pressing any button or by inserting a Learning Block into the interactive Smart Star™ Cube.

NOTE: This product is in Try-Me mode in the packaging. After opening the package, turn the product off and on again to proceed with normal play. If the unit powers down while playing, please install a new set of batteries.

ACTIVITIES1. Music Button Press the Music Button to hear short

tunes and sing-along songs about instruments and shapes. The lights will flash with the sounds.

8

2. Question Button Press the Question Button to hear

interactive questions and short tunes. The lights will flash with the sounds.

3. Smart Star™ Cube

Insert the double-sided Learning Blocks into the interactive Smart Star™ Cube to learn about instruments, shapes and objects. The lights will flash with the sounds.

4. Stacking Fun

Stack the blocks onto the electronic Smart Star™ Cube to hear fun sound effects.

5. Mix and Match

For added fun, the LeapBuilders® Shapes & Music Castle™ set interacts with the Learning Blocks from other LeapBuilders® sets. Simply put a Learning Block from another LeapBuilders® set into the interactive Smart Star™ Cube to see flashing lights and hear learning phrases and short tunes (additional sets sold separately). Please note, blocks from sets in different languages have unique audio responses and cannot be used interchangeably.

9

SING-ALONG SONG LYRICSSong 1Build up the castle high, With LeapBuilders. Stacking tower to the sky, We're learning with LeapBuilders now, Yeah!

Song 2 It's a royal day! Let's celebrate!The castle is filled with music today.It's a royal day! Let's celebrate!And hear all the instruments play.violin (+ violin riff)trumpet (+ trumpet riff) flute (+ flute riff) drum (+ drum riff)

Song 3 The castle is full of some wonderful shapes.In every room there are shapes to find!King's crown is a circle, his throne is a squareIn every room there are shapes to find!The princesse's dresses are triangles too.In every room there are shapes to find!

Song 4The king says huzzah, the queen says hurrah.Throw a party for the people of the court.The princess will be there, with flowers in her hair, As the courageous knight returns.

10

CARE & MAINTENANCE1. Keep the unit clean by wiping it with a slightly damp

cloth.2. Keep the unit out of direct sunlight and away from any

direct heat source.3. Remove the batteries when the unit will not be in use for

an extended period of time.4. Do not drop the unit on hard surfaces and do not expose

the unit to moisture or water.

TROUBLESHOOTINGIf for some reason the unit stops working or malfunctions, please follow these steps:

1. Please turn the unit OFF.2. Interrupt the power supply by removing the batteries.

3. Let the unit stand for a few minutes, then replace the batteries.

4. Turn the unit ON. The unit will now be ready to use again.5. If the unit still does not work, install a brand new set of

batteries.

IMPORTANT NOTE:If the problem persists, please call our Consumer Services Department at 1-800-701-5327 in the U.S. or email support@leapfrog.com. Creating and developing LeapFrog® products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

11

Environmental Phenomena The unit may malfunction if subjected to radio-frequency interference. It should revert to normal operation when the interference stops. If not, it may become necessary to turn the power OFF and back ON, or remove and reinstall the batteries. In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.

Impact de l’environnement Une défaillance de fonctionnement de l’appareil peut survenir s’il est sujet à des interférences avec les fréquences radioélectriques. Le fonctionnement normal de l’appareil devrait reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de retirer et réinstaller les piles. Dans l’éventualité peu probable d’une décharge électrostatique, un mauvais fonctionnement et une perte de mémoire de l’appareil peuvent se produire. L’utilisateur doit alors retirer et réinstaller les piles pour réinitialiser l’appareil.

NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

12

• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for

help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.CAN ICES-3 (B)/NMB-3(B)

Supplier’s Declaration of Conformity

Trade Name: LeapFrog®

Model: 6068 Product Name: LeapBuilders® Shapes & Music Castle™ Responsible Party: LeapFrog Enterprises, Inc. Address: 6401 Hollis Street, Suite 100, Emeryville, CA 94608 Website: leapfrog.com

13

Read our complete warranty policy online atleapfrog.com/warranty.

91-003690-000 US

Visit our website for more information about our products,downloads, resources and more.

leapfrog.com

LeapFrog Enterprises, Inc.

A subsidiary of VTech Holdings Limited.

TM & © 2019 LeapFrog Enterprises, Inc.

All rights reserved.