moldingknives.com shaper catalogue › shaperknives › shaper_catalogue_2018.pdf · aluminum...
TRANSCRIPT
moldingknives.com Shaper Catalogue
ContentsBACK BAND ........................................................................................................3
BACK KNIVES .....................................................................................................4
BASEBOARDS .....................................................................................................5
BASE CAP .........................................................................................................7
BATTENS/PANEL STRIPS & MULLION CASINGS....................................................8
BULLNOSE .........................................................................................................9
CASINGS ..........................................................................................................13
CHAIR RAILS ....................................................................................................15
COLUMNS ........................................................................................................16
COPE & STILE / PANELLING ..............................................................................17
COVES .............................................................................................................31
CROWNS ..........................................................................................................32
DOOR STOPS ....................................................................................................34
HAND RAILS .....................................................................................................35
HOT TUB ..........................................................................................................37
LOCK MITRE.....................................................................................................39
MITRED DOORS ................................................................................................40
PICTURE FRAMES ............................................................................................41
PLYCAP ............................................................................................................42
QUARTER ROUND .............................................................................................43
SHINGLE MOULDINGS.......................................................................................44
SIDING .............................................................................................................46
TONGUE & GROOVE ..........................................................................................48
TRANSITION MOLDINGS ...................................................................................56
WAINSCOTTING & WALL PANLELING ................................................................57
ACCESSORIES ..................................................................................................58
Most knife sets in this catalogue are available for both Corrugated Shaper Heads and Euro Style Shaper Heads. Knives noted with a “ * ” are not available for the Euro Style Heads, however, modified versions often are, as well as custom profiles. Corrugated knives require a corrugated head as tall as (or taller than) the knives being installed in the head.
www.moldingknives.com©2018
Page 3
BACK BAND
www.moldingknives.com©2018
Page 4
BACK KNIVES2 styles available in different widths
www.moldingknives.com©2018
Page 5
BASEBOARDS
www.moldingknives.com©2018
Page 6
BASEBOARDS
www.moldingknives.com©2018
Page 7
BASE CAP
*
BATTENS/PANEL STRIPS& MULLION CASINGS
www.moldingknives.com©2018
Page 8
BULLNOSE
www.moldingknives.com©2018
Page 9
BULLNOSE
www.moldingknives.com©2018
Page 10
BULLNOSE
www.moldingknives.com©2018
Page 11
BULLNOSE
www.moldingknives.com©2018
Page 12
* *
* *
www.moldingknives.com©2018
Page 13
CASINGS
*
*
*
www.moldingknives.com©2018
Page 14
CASINGS
* *
www.moldingknives.com©2018
Page 15
CHAIR RAILS
*
*
Modified versions available for both Corrugated Heads and Euro Style Heads.
COLUMNS
www.moldingknives.com©2018
Page 16
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 17
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 18
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 19
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 20
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 21
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 22
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 23
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 24
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 25
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 26
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 27
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 28
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 29
COPE & STILE / PANELLING
www.moldingknives.com©2018
Page 30
*
*
*
COVES
www.moldingknives.com©2018
Page 31
* *
CROWNS
www.moldingknives.com©2018
Page 32
*
CROWNS
www.moldingknives.com©2018
Page 33
*
*
*
*
www.moldingknives.com©2018
Page 34
DOOR STOPS
*
www.moldingknives.com©2018
Page 35
HAND RAILS
*
www.moldingknives.com©2018
Page 36
HAND RAILS
www.moldingknives.com©2018
Page 37
HOT TUB
www.moldingknives.com©2018
Page 38
HOT TUB
*
*
LOCK MITRE
www.moldingknives.com©2018
Page 39
*
*
www.moldingknives.com©2018
Page 40
MITRED DOORS
*
www.moldingknives.com©2018
Page 41
PICTURE FRAMES
PLYCAP
www.moldingknives.com©2018
Page 42
www.moldingknives.com©2018
Page 43
QUARTER ROUND
www.moldingknives.com©2018
Page 44
SHINGLE MOULDINGS
www.moldingknives.com©2018
Page 45
SHINGLE MOULDINGS
*
www.moldingknives.com©2018
Page 46
SIDING
www.moldingknives.com©2018
Page 47
SIDING
www.moldingknives.com©2018
Page 48
TONGUE & GROOVE
www.moldingknives.com©2018
Page 49
TONGUE & GROOVE
www.moldingknives.com©2018
Page 50
TONGUE & GROOVE
www.moldingknives.com©2018
Page 51
TONGUE & GROOVE
www.moldingknives.com©2018
Page 52
TONGUE & GROOVE
www.moldingknives.com©2018
Page 53
TONGUE & GROOVE
www.moldingknives.com©2018
Page 54
TONGUE & GROOVE
www.moldingknives.com©2018
Page 55
TONGUE & GROOVE
*
TRANSITION MOLDINGS
www.moldingknives.com©2018
Page 56
www.moldingknives.com©2018
Page 57
WAINSCOTTING& WALL PANLELING
Aluminum Shaper Heads - Made in the U.S.A 3” diameter two knifeaccepts 1/4” thick corrugated kniveseach has 3” outer diameter (before installing knives)
2” tall* has a 3/4” bore - Made in the U.S.A.3” tall* has a 1” bore - Made in the U.S.A
Steel Shaper Heads - Made in Canada3” diameter two knife x 3/4” bore accepts either 1/4” or 5/16” thick corrugated kniveseach has 3” outer diameter (before installing knives)
2” tall*3” tall*
4” diameter two knife x 1-1/4” boreaccepts either 1/4” or 5/16” thick corrugated kniveseach has 4” outer diameter (before installing knives)
2” tall*3” tall*4” tall*
Euro-Style Shaper Heads - Made in Switzerland3/4” bore head1-1/4” bore head
Accepts knives that fit: Baker 412 side heads and Logosol PH-260 side headsAs well as SOME of the heads made by the following manufacturer’s:
AmanaCMTFreud
Adapters / Flange BushingsWWB-020 ..........................................................................3/4” to 1/2”WWB-030 ......................................................................1-1/4” to 3/4”WWB-040 ........................................................................... 1-1/4 to 1”Other sizer available.
*tall refers to the height of the cutter head when installed vertically in a shaper.
ACCESSORIES
www.moldingknives.com©2018
Page 58
**Ask about our 4-slot shaper heads with 2x20° and 2x12° opposing slots.
We also supply:
• panel cutter heads• rub collars• custom shaper knives• stock shaper knives
ACCESSORIES
www.moldingknives.com©2018
Page 59
moldingknives.com
1176 Black Rock RoadClifton, N.S.
B6L 1C1Canada
(Tel) 1-866-499-8399(Fax) 1-902-893-7890