sf-100, sf-150, sf-200, sf-300 channel drainage for the ... · 3 anrin – the drainage system at...
TRANSCRIPT
Drainage with system
SF-100, SF-150, SF-200, SF-300
Channel drainage for the load classes D 400 to F 900
2
04 ANRIN Heavy duty systems Material / Composition / Properties
06 Applications Overview of the load classes
08 SF-100 heavy duty channels Product specifications / accessories
10 SF-150 heavy duty channels Product specifications / accessories
12 SF-200 heavy duty channels Product specifications / accessories
14 SF-300 heavy duty channels Product specifications / accessories
16 Sump units and sump assemblies for SF channels System overview / product specifications
18 Cover gratings Grating design / fastening system
22 UNILINK© Joint Joint system / sealing technology
24 Slope types Slope invert, stepped invert and constant invert
26 Example installations Load class D 400 / E 600 / F 900
Contents
Port of Nuremberg drainage
3
ANRIN – the drainage system
At our production and logistics centre located in Anröchte, North Rhine West-phalia, we have been developing and producing pioneering drainage chan-nels made of resin concrete and cover gratings for all physical and artistic demands of modern channel drainage since 1971.
Thanks to our especially efficient dis-tribution, we are able to supply any construction site in Germany in less than 48 hours as well as many other countries within just a few days. Always new, creative and patented channel and grating systems give our demand-ing construction managers, architects, tradesmen and specialist dealers the safe and secure feeling that they have made the right choice for the long term.
Millions of metres of installed channel and certification in accordance with DIN EN ISO 9001 assure the high qual-ity of our owner-operated family com-pany. We place a special emphasis on technical and application-based con-sultation, with the goal of continuously finding the best solution for your indi-vidual construction project. Contact us and put our expertise to the test.
4
ANRIN Heavy duty systems
ANRIN heavy duty systems made of resin concrete
The material comprised of naturally occurring mineral quartzes and resin is distinguished by its structural and environmental benefits.
In comparison with conventional, ce-ment-bound materials, resin concrete allows for unit weights which are much easier to handle. By processing the material on the construction site, time and money are saved.
UNILINK® jointThe optimised UNILINK® joint system eliminates the traditional differentiation between the beginning and end of the channel. Elements with an equal installa-tion height can be joined in any arbitrary direction. The symmetrically divided half-joints enable the optional sealing of the splicing. Vertically aligned grooves and tongues support an efficient installation: In the process, the installation alignment can be cho-sen arbitrarily! The flexibility in the design and installation phases enters a new dimension with the UNILINK® joint!
Perforations on the 50 cm elements for• T-junctions• Elbowjoints• Crossjunctions
5
The high quality of the individual com-ponents as well as the closed material matrix make the ANRIN resin concrete watertight and highly resistant to corro-sion as well as a number of substances.
As a result, surfaces can be designed which purposefully drain off rainwa-ter and the ground water can be reli-ably protected against environmental pollution.
Our drainage systems (KE and SF) are tested and certified in accordance with DIN EN 1433 and KIWA BRL 5211.
Fastening systemThe RapidLock automatically fastens the cover grating safely for traffic and can be opened without special tools, even with heavy soiling.
Gratings• Intelligentfasteningsystem• LoadclassesD400–F900• Ductilecastirondesign• OvalGripdesignforthe
nominalwidths100–300
Resin concrete – technical data• Bendingtensilestrength:>22N/mm²• Compressionstrength:>90N/mm²• E-module:approx.25kN/mm²• Density:2.1–2.3g/cm³• Waterpenetrationdepth:0mm
Heavy duty Edge rails made of ductile cast iron
Pipe socketsalready poured in the componentDA / OD 110 / 160 / 200
6
Channel drainage for the load classes D 400 to F 900
According to DIN 19580 / EN 1433 “Drainage channels for vehicular and pedestrian areas”, these surfaces are assigned to specific load classes de-pending on the use.
Accordingly, the respective suitable ANRIN heavy dusty system can be se-lected with the appropriate cover grat-ing. The following tables include a list of typical areas of application and the channel systems which can be used.
Applications
1 Regensburg CC access drive2 Passau city centre3 Regensburg CC parking lot4 Port of Nuremberg5 Port of Nuremberg6 Passau administration
7
Load classes 1 Areas of application SF-100 SF-150 SF-200 SF-300
D 4002 (test force 400 kN) Roads Parking surfaces Pedestrian roadsE 600 (test force 600 kN) Traffic routes in industrial areas Surfaces with high wheel loads Non-public traffic surfacesF 900 (test force 900 kN) Flight operations areas of commercial airports
Special surfaces
1 in accordance with DIN 19580 2 no cross-road drainage of busy roads
1000164
164
164 1000
164500
hh
164
110
110
110
100
8
SF-100 heavy duty channels
ANRIN SF-100 heavy duty channel with GJS cast edge rail
SF-100100 cm
SF-10050 cm
Step connector
End capwith DA / OD 110 poured pipe socket
End cap
Sump unitwith DA / OD 110 poured pipe socket
500164
510
585
585
9
ANRIN SERVICE provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation with our technical office staff and good contact with the field staff. ANRIN is certified according to DIN EN ISO 9001.
ANRIN DIRECT CONTACT: +49 (0) 29 47.97 81-0
Product specifications SF-100 Sump unit
Material Resin concrete Resin concreteLength 50 cm and 100 cm 50 cmWidth 16.4 cm 16.4 cmHeight 10.0–26.50cm 58.0cmEdge type GJS cast edge rail GJS cast edge railNominal width 100 mm 100 mmCover gratings F 900* F 900*Slope type Slope invert 0.5 % Stepped invert Constant invert Joint type UNILINK® joint UNILINK® jointFastening RapidLock fastening RapidLock fastening
* no cross-road drainage of busy roads
Cover grating
Oval Grip slotted cast iron grating
Load classes
Oval Grip SF-100 slotted cast iron grating
D 400* / E 600*
F 900*
214
214 214
hh
130
130
1000
500 214
10
SF-150 heavy duty channels
ANRIN SF-150 heavy duty channel with GJS cast edge rail
SF-150100 cm
SF-15050 cm
Step connector
End capwith DA / OD 160 poured pipe socket
End cap
Sump unitwith DA / OD 160 poured pipe socket
500
520
620
214
11
620
ANRIN SERVICE provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation with our technical office staff and good contact with the field staff. ANRIN is certified according to DIN EN ISO 9001.
ANRIN DIRECT CONTACT: +49 (0) 29 47.97 81-0
Product specifications SF-150 Sump unit
Material Resin concrete Resin concreteLength 50 cm and 100 cm 50 cmWidth 21.4 cm 21.4 cmHeight 22.0–32.0cm 62.0cmEdge type GJS cast edge rail GJS cast edge railNominal width 150 mm 150 mmCover gratings D 400* / E 600* and F 900* D 400* / E 600* and F 900*Slope type Slope invert 0.5 % Stepped invert Constant invert Joint type UNILINK® joint UNILINK® jointFastening RapidLock fastening RapidLock fastening
* no cross-road drainage of busy roads
Cover grating
Oval Grip slotted cast iron grating
Load classes
Oval Grip SF-150 slotted cast iron grating
D 400* / E 600*
F 900*
1000264
264 500
h
1000264
130
130
264
h h
130
130
264
12
SF-200 heavy duty channels
ANRIN SF-200 heavy duty channel with GJS cast edge rail
SF-200100 cm
SF-20050 cm
End capwith DA / OD 160 poured pipe socket
End cap
Sump unitwith DA / OD 160 poured pipe socket
500
585
700 70
0
264
13
ANRIN SERVICE provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation with our technical office staff and good contact with the field staff. ANRIN is certified according to DIN EN ISO 9001.
ANRIN DIRECT CONTACT: +49 (0) 29 47.97 81-0
Product specifications SF-200 Sump unit
Material Resin concrete Resin concreteLength 50 cm and 100 cm 50 cmWidth 26.4 cm 26.4 cmHeight 13.0–29.0cm 70.0cmEdge type GJS cast edge rail GJS cast edge railNominal width 200 mm 200 mmCover gratings D 400* / E 600* and F 900* D 400* / E 600* and F 900*Slope type Slope invert 0.5 % Stepped invert Constant invert Joint type UNILINK® joint UNILINK® jointFastening RapidLock fastening RapidLock fastening
* no cross-road drainage of busy roads
Cover grating
Oval Grip slotted cast iron grating
Load classes
Oval Grip SF-200 slotted cast iron grating
D 400* / E 600*
F 900*
1000364
364 500
390
170
390
170
14
SF-300 heavy duty channels
ANRIN SF-300 heavy duty channel with GJS cast edge rail
SF-300100 cm
SF-30050 cm
End capwith DA / OD 200 poured pipe socket
End cap
364
390
364
390
364
430
400
527
250
15
Product specifications SF-300
Material Resin concreteLength 50 cm and 100 cmWidth 36.4 cmHeight 39.0 cmEdge type GJS cast edgeNominal width 300 mmCover gratings D 400* / E 600* and F 900*Slope type Constant invertJoint type UNILINK® jointFastening RapidLock fastening
* no cross-road drainage of busy roads
Cover grating
Oval Grip slotted cast iron grating
Load classes
Oval Grip SF-300 slotted cast iron grating
D 400* / E 600*
F 900*
16
364 500
430
400
527
546
250
670
970
1475
1345
SUMP UNITS AND SUMP ASSEMBLIES FOR SF CHANNELS
ANRIN System overview of sump units and sump assemblies for SF channels
System sump assemblywith open top section
System sump assemblywith closed top section
17
390
364 540
430
400
527
546
250
670
970
1475
1345
36439
0
364
Adapter connection, various designs• SF-100 to SF-300 sump assembly• SF-150 to SF-300 sump assembly• SF-200 to SF-300 sump assembly
Product specifications SF-300 sump unit
Material Resin concreteLength 54.0 cmWidth 36.0 cmHeight 107.5 cm, 147.5 cmEdge type GJS cast edgeNominal width 300 mmCover gratings D 400* / E 600* and F 900*Joint type UNILINK® jointFastening RapidLock fastening
* no cross-road drainage of busy roads
ATTENTION: The “sump assembly” system element is not intended for use in facilities for the storage, filling and handling of water polluting substances!
Adapter connection
18
Cover gratings
ANRIN cover gratings The edge rails and cover gratings of ANRIN heavy duty channel systems are made of ductile cast iron. To accom-modate the traffic loads, gratings and edge rails are intermeshed with one another and fastened with Rapid Lock. The self-locking RapidLock fastening
even retains its functionality when heavily soiled. It is locked in place and lifted out without special tools. The exclusive OvalGrip design lends it an attractive surface with maximal drain-age of accumulated precipitation.
Product specification
Type Oval Grip slotted cast iron gratingMaterial EN-GJS cast ironLength 50 cmInlet cross-section 490 cm2/m, 680 cm2/m, 916 cm2/m, 1196 cm2/mFastening RapidLock fastening, self-locking
Load classes SF-100 SF-150 SF-200 SF-300
D 400* / E 600*
F 900*
* no cross-road drainage of busy roads
19
Load classes D 400* / E 600* and F 900*
Intelligent fastening system
OvalGrip design for the nominal widths 100 – 300
Optimal interruption of the water flow through diagonal positioning of the step ornaments
In accordance with DIN EN 1563 Ductile cast iron design
High water collection capacity through large inlet cross-section
20
Cover gratings
RapidLock fastening This patented fastening developed in-house by ANRIN combines all the important functions of a grating lock for the accommodation of heavy loads in a stable and functional component.
In addition, it is installed unobtrusively and harmonically into the attractive surface of the cast iron grating.
21
RapidLock locks in place safely for traffic areasRapidLock open
Advantages
+ Easy to install and lock in place+ Self-locking Rapidlock lacks the grating safely in place for traffic+ Better accommodation of traffic loads with intermeshing of grating and channel body+ Reliable function even when heavily soiled+ It is locked in place and lifted out without special tools
22
UNILINK® joint
ANRIN UNILINK® joint The optimised UNILINK® joint system eliminates the traditional differentiation between the beginning and end of the channel. Elements of an equal installa-tion height can be joined in any arbitrary direction. The symmetrically divided half-joints enable the optional sealing of the splicing. Vertically aligned grooves and tongues support an efficient instal-lation: In the process, the installation alignment can be chosen arbitrarily! The flexibility in the design and instal-lation phases enters a new dimension with the UNILINK® joint!
23
ANRIN sealing technology The tightness of the channel joints plays an essential role for the func-tionality. With the ANRIN joint seal set, comprised of a sealer (poly sul-phide based two-component sealant), a primer, a mixer column, incl. spiral and a hand pump sprayer, water-tight channel joints for special installation situations, such as petrol stations and facilities for the storage, filling and han-dling of water polluting substances can be made easily, quickly and safely.
Liquid-tight 1 Areas of application SF-100 SF-150 SF-200 SF-300
Liquid-tight seal for the environmentally compatible handling of liquids harmful to water.
1 The DIBT has issued the general type approval for use in the area of petrol stations and facilities for the storage, filling and handling of water polluting substances under the approval number Z-74.4-30.
This was supplemented in 2012 with the addition of a firmly bonded link between resin concrete and pipe material. All elements with a pipe connection have a poured pipe socket in the appropriate diameter in the systems SF-100 to SF-300.
24
020
020R010R
0R
1234567891011121314151617181920
010
0050105
0205
0Step connector
Sump unit for all installation
heights with DA / OD 110 and
160 poured pipe sockets
50 cm channel with perforations
for the corner connections
100 cm channels without slope invert
End cap
End cap with DA / OD 110
poured pipe socket
100 cm channel with DA / OD 110 poured pipe socket
0105
010R
010010 10 9 8 7 6 5 4 3 2 1 0 0 0 0 0 0 0
0
005
0R
Step connector
100 cm channel with DA / OD 160 poured pipe socket
End cap with DA / OD 160
poured pipe socket
Sump assembly top, raiser and base for all installation heights Sump unit for all installation heights
with DA / OD 160 and 200
poured pipe sockets
Installation direction can be changed
at any point without adapter
Sump assembly intermediate section with DA / OD 160 perforation
Sump assembly with DA / OD 160 and 200 formed NBR ring
End cap
0205
020
020R010R
0R
020 010 010 0 0 0 0 0 0 000105
005
Step connector
50 cm channel with
perforations for the
corner connections
Installation direction
can be hanged at any point
without adapter
Sump unit for all installation heights
with DA / OD 160 and 200
poured pipe sockets100 cm channel with DA / OD 160 poured pipe socket
End cap with DA / OD 160
poured pipe socket
End cap
Slope types
Slope types
Slope invertSF-100 and SF-150
Stepped invert
SF-100 and SF-150
Constant invert
combined with slop invert
SF-200
25
020
020R010R
0R
1234567891011121314151617181920
010
0050105
0205
0Step connector
Sump unit for all installation
heights with DA / OD 110 and
160 poured pipe sockets
50 cm channel with perforations
for the corner connections
100 cm channels without slope invert
End cap
End cap with DA / OD 110
poured pipe socket
100 cm channel with DA / OD 110 poured pipe socket
0105
010R
010010 10 9 8 7 6 5 4 3 2 1 0 0 0 0 0 0 0
0
005
0R
Step connector
100 cm channel with DA / OD 160 poured pipe socket
End cap with DA / OD 160
poured pipe socket
Sump assembly top, raiser and base for all installation heights Sump unit for all installation heights
with DA / OD 160 and 200
poured pipe sockets
Installation direction can be changed
at any point without adapter
Sump assembly intermediate section with DA / OD 160 perforation
Sump assembly with DA / OD 160 and 200 formed NBR ring
End cap
0205
020
020R010R
0R
020 010 010 0 0 0 0 0 0 000105
005
Step connector
50 cm channel with
perforations for the
corner connections
Installation direction
can be hanged at any point
without adapter
Sump unit for all installation heights
with DA / OD 160 and 200
poured pipe sockets100 cm channel with DA / OD 160 poured pipe socket
End cap with DA / OD 160
poured pipe socket
End cap
Product specifications SF-100, SF-150, SF-200, SF-300
Material Resin concreteEdge type GJS cast edgeNominal width 100 mm 150 mm 200 mm 300 mmSlope type Slope invert 0.5 % Stepped invert Constant invertJoint type UNILINK® jointFastening RapidLock fastening Grating design OvalGrip
26
A
B
A
B
200
200200
1
2
3
4
6
5
2
4
8
7
2
200
200200
3
4
9
200
200200
1
2
3
4
6
5
2
4
8
7
2
3
4
9
200
200200
SF-100
A
SF-150
A
BB
Example installations
ANRIN installation information
With ANRIN drainage systems, accu-mulating rainwater should be drained
safely and quickly. Moreover, the struc-tural elements have the task of accom-modating dynamic loads arising from traffic-related demands and dispers-ing them to the area of the foundation. The following installation guidelines are
schematic representations. These are provided as examples and are non-binding. The information provided here is based on our long-term experience in excavation and road construction as well as the state-of-the-art technology.
1 In-situ road concrete2 Base course with hydraulic binder3 Concrete cladding of the channel body4 Gravel base (frost-protection layer)5 Prefabricated concrete sheets and / or stone systems6 Paving bed7 Wearing course8 Bonding course9 Bitumen base course
Road concrete and / or concrete sheets or paving bed
Cast asphalt
Road concrete and / or concrete sheets or paving bed
Cast asphalt
27
A
B
A
B
200
200200
1
2
3
4
6
5
2
8
7
2
3
4
9
200
200200
250
250
250
1
2
3
4
6
5
2
8
7
3
4
9
250
250
250
SF-200
A
B
SF-300
A
B
The current guidelines and regulations of the state-of-the-art technology must be observed for the installation. For example, these are:
DIN EN 1433 “Drainage channels for vehicular and pedestrian areas”DIN EN 19580 “Drainage channels for vehicular and pedestrian areas”RStO “Guidelines for the standardisation of the superstructure of vehicular areas”DIN EN 206-1 “Concrete. Specification, performance, production and conformity”, to be observed, in particular:
ZTV concrete StB 07 for the construction of base courses with hydraulic binders and concrete road wearing courses.
(VOB) Part C DIN 18318 “Construction work on roadways”DIN EN 1045-2“Concrete,reinforcedandprestressedconcretestructures.Part2:Concrete–Specification,properties,
production and conformity; application rules for DIN EN 206-1”
Despite this, designers and planners are always obligated to check the prod-ucts and the installation instructions for their appropriateness. The example details are simplified recommenda-tions for execution. Constructions are
to be re-created on a project-specific basis. Special local conditions must be reviewed by the planner and the appro-priate installation types must be taken into account. The example details are simplified recommendations for execu-
tion. Constructions are to re-created on a project-specific basis.Important: Insert gratings for the instal-lation.
Road concrete and / or concrete sheets or paving bed
Cast asphalt
Road concrete and / or concrete sheets or paving bed
Cast asphalt
SF-
0118
-EN
Drainage with system
We invite you to discover more.
Whether you are already planning a specific project or simply want to learn more about the general possibilities: Contact us and put our expertise to the test.
Dealer stamp
ANRIN GmbHSiemensstraße 1 D-59609 Anröchte Tel.: +49 (0) 29 47.97 81-0 Fax: +49 (0) 29 47.97 81-50 Email: [email protected]: www.anrin.com