setup guide for modela pro ii mdx

1
Setup Guide for MODELA PRO II MDX-540 1. Install Roland SRP Player Version 1.4 from the CD. 2. Go to http://support.rolanddga.com/_layouts/rolandreports/_productsuppo rtsearch.aspx?pf=Milling%20Machines&pm=MDX-540 a. (alternate method, search “mdx 540 windows 7” and it is the first link) 3. Click: Drivers > 2.5D Driver for Windows 7 (64-bit) ver. 1.10 a. Extract the zipped folder; remember the file location 4. Under Top 5 FAQs, click “ How To Install A Roland Driver In Windows 7 And Windows Vista a. Follow those steps to install the machine’s driver b. Click “return to search page” 5. Click: Software Updates > SRP Player Updater to Ver.1.22 a. Extract the zipped folder b. Run the .exe file 6. You should now be ready to start SRP Player and interface with the milling machine.

Upload: truong-cai

Post on 27-Dec-2015

32 views

Category:

Documents


10 download

DESCRIPTION

dsafasfdsf

TRANSCRIPT

Page 1: Setup Guide for Modela Pro II Mdx

Setup Guide for MODELA PRO II MDX-540

1. Install Roland SRP Player Version 1.4 from the CD. 2. Go to http://support.rolanddga.com/_layouts/rolandreports/_productsupportsearch.aspx?

pf=Milling%20Machines&pm=MDX-540a. (alternate method, search “mdx 540 windows 7” and it is the first link)

3. Click: Drivers > 2.5D Driver for Windows 7 (64-bit) ver. 1.10

a. Extract the zipped folder; remember the file location4. Under Top 5 FAQs, click “How To Install A Roland Driver In Windows 7 And Windows

Vista”a. Follow those steps to install the machine’s driverb. Click “return to search page”

5. Click: Software Updates > SRP Player Updater to Ver.1.22

a. Extract the zipped folderb. Run the .exe file

6. You should now be ready to start SRP Player and interface with the milling machine.