set up guide...a can for any space we make our step cans in many sizes and styles. find the one to...
TRANSCRIPT
set up guide
1
3
2
quick start• remove battery cover
at base of pump with screwdriver
• insert 4 AA batteries as shown
• twist off the lid on top of the chamber to fill
Note: Do not use soap with exfoliants.
• turn dial at base of pump to setting 4
• press and hold the top button behind the reservoir lid until soap comes out
insert batteries
prime the pump
fill the reservoir
troubleshooting tipIf soap isn’t coming out, air pressure may be blocking the valve. Try giving the little tab under the nozzle a gentle tug to allow air through.Be careful: Don’t pull out the tab!
adjust the volumeTo change the amount dispensed, turn the dial at the base of the pump to the desired setting.
activate 20-second wash timerTurn dial to OFF position. Press and hold top button, then turn dial to any setting.
The blue light will flash continuously when it’s time to replace the batteries.
low battery alert
setting
1 thin soap
3 thick soap, lotion, or sanitizer2 standard soap or sanitizer
4 large amount of soap, lotion or sanitizer
recommended use
OFF
Questions? Our customer service team is more than happy to help.
or find answers online at www.simplehuman.com/�service
1-888-988-8880 Mon-Fri 8am-5pm Pacific time
use & care• Your sensor soap pump dispenses
soap, hand sanitizer, or lotion. Please keep it simple: avoid using soaps with exfoliants or moisture beads, foaming soaps, or soap that has been diluted with water.
• To clean, wipe the pump with a damp cloth—do not submerge it in water or use it in the shower.
a can for any space
We make our step cans in many sizes and styles. Find the one to match your space at www.simplehuman.com
semi-round step can slim plastic step can
butterfly step can slim step can
round step can
see the entire collection at www.simplehuman.com rectangular recycler
tools for efficient living®
www. .com12
0-00
71-0
2