set back area - rumber materials
TRANSCRIPT
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
SET BACK AREASAFETY. PERFORMANCE. COST-SAVINGS.
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREARUMBER SET BACK AREA
Rumber products are safer, better performing and more cost-effective than any option available.
Rumber Materials LLC manufactures composite material boards, sheets, and molded
products from 100% recycled tire rubber and plastics through its patented process.
These environmentally friendly products are extremely durable and impervious to fluids,
mud, oil, and UV rays, making them more desirable replacements for wood and plastics
in a variety of applications. A few of these applications include oil and gas, agriculture,
industrial, and military applications, with features which clearly out-perform other
materials, resulting in less down-time, fewer replacement costs, and extended product life.
WHY RUMBER?
5x
15 2000
100%LONGER THAN WOOD
YEARS IN THE INDUSTRY
MAJOR OIL RIGS WORLDWIDE
RECYCLED MATERIALS
lasts
used over used on over
made from
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREARUMBER SET BACK AREA
FEATURES & BENEFITS
100% Recycled Materials Product
Exact Dimensions–No Waste
Simple to Install and Easy to Clean
Traction Surface
Impervious to Fluids, Mud, Oil, & UV Rays
ATSM Tested With All Drilling Muds
Withstands Extreme Heat & Cold
Reduces Slippage & Increases Safety
Durable and Long-Lasting
Will Not Crack, Splinter, or Rot
Wide Variety of Applications
Most Cost-Effective Option
Environmentally Friendly
Will Not Damage Pipe Threads
FEATURES BENEFITS
Call Us Toll Free 877-RUMBER1 www.rumber.com
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
RUMBER IN USESET BACK AREA EXAMPLES
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
MIXER
EXTRUDER
plastics
tires
products
What is Rumber?
Rumber is produced through its patented process
in which ground whole tire rubber and recycled
plastics are mixed and extruded through a profile
die. Once the extruded board cools, it results in a
product which is rigid and can be cut and drilled
like wood, but is also more flexible, durable and
impervious to fluids and UV Rays.
Rumber products can take the shape of boards,
timbers, sheets and molded forms.
Call Us Toll Free 877-RUMBER1 www.rumber.com
Dear Rumber,
In December of 2001, I replaced my set back area with
Rumber. I have been working on an oil rig, drilling in the
oil field for over 20 years. I have drilled all over the world
- Texas, California, Dakotas, Middle East, South America &
Offshore. We installed a Rumber set back area on my rig
and have yet to have replaced the set back area. If I was
using wood I would have had to replace my wood set back
area 4-5 times.
Rumber has increased my rig’s performance, safety,
around 10 times less downtime, and saved my company
money. Rumber rocks.
- Oil RIg Tool Pusher
CUSTOMERTESTIMONIAL
RUMBER SET BACK AREA
10xLESS DOWNTIME
around
Call Us Toll Free 877-RUMBER1 www.rumber.com
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
SATISFIED CUSTOMERS
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
XX
BOOT
BOOT
Setback Area with Mouse Hole
Setback Area without Mouse Hole
X
X
X
X
X
X
XX
X
X
X
X
X
X
MEASURING GUIDEPlease record all measurments in inches.
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
RUMBER BOARDSSTOCK # ACTUAL SIZE DESCRIPTION LBS. PER FT.
8005 3/4" x 5-1/8" Plank 80-20 Plank Board 1.66
8007 7/8" x 6-3/4" Plank 80-20 Plank Board 2.64
9801 7/8" x 6-3/4" Plank Board 2.48
9803 7/8" x 6-3/4" Plank Board Diamond Surface 2.48
9805 7/8" x 7-3/4" Ship-lap Board 2.88
9806 7/8" x 7-3/4" Ship-lap Board Traction Surface/Cleat 2.88
9807 7/8" x 7-3/4" Ship-lap Board Diamond Surface 2.88
9808 7/8" x 7-3/4" Ship-lap Board Traction Surface 2.88
9811 3/4" x 5-1/8" Plank Board 1.66
9812 3/4" x 5-1/8" Plank Board Traction Surface 1.66
9813 3/4" x 5-1/8" Plank Board Diamond Surface 1.66
4119 7/8" x 6-3/4" Rumber EZ Runner Track 1.50
9905 1-1/8" x 5-1/2" Ship-lap Board 2.60
9907 1-1/8" x 5-1/2" Ship-lap Board Diamond Surface 2.60
9908 1-1/8" x 5-1/2" Ship-lap Board Traction Surface 2.60
9502 1-1/8" x 5-1/2" Tongue & Groove Traction Surface 3.70
9102 1-1/2" x 7" Tongue & Groove Traction Surface 4.56
9108 1-1/2" x 8" Tongue & Groove Traction Surface 4.76
9302 1-1/2" x 7-1/16" Tongue & Groove Traction Surface 4.08
9501 1-1/2" x 5-1/2" Tongue & Groove Board 3.70
9101 1-1/2" x 7" Tongue & Groove Board 4.56
9107 1-1/2" x 8" Tongue & Groove Board 4.76
9301 1-1/2" x 7-1/16" Tongue & Groove Board 4.08
4131 1" x 3" Plank Board 1.54
4128 2" x 3" Plank Board 2.35
9602 1-1/2" x 3-1/2" Plank Board Traction Surface 2.00
9504 1-1/2" x 5-1/2" Plank Board Traction Surface 3.70
9104 1-1/2" x 7" Plank Board Traction Surface 4.56
PRODUCT LISTSpecifications & Technical Data
NOTE: Board width may vary +/- 1/8"
Diamond plate
Cut
Slick
Traction Surface Options
Buffed
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
Best Seller
4136
Best Seller
9212
2-1/2" x 12"
6" x 3"
RUMBER BOARDSSTOCK # ACTUAL SIZE DESCRIPTION LBS. PER FT.
9601 1-1/2" x 3-1/2" Plank Board 2.00
9503 1-1/2" x 5-1/2" Plank Board 3.70
9103 1-1/2" x 7" Plank Board 4.56
9446 1-3/4" x 4-1/2" Plank Board Traction Surface 3.15
9406 1-3/4" x 5-3/4" Plank Board Traction Surface 4.03
9402 1-3/4" x 7-1/4" Plank Board Traction Surface 5.25
9404 1-3/4" x 8-1/8" Plank Board Traction Surface 5.64
9408 1-3/4" x 8" Plank Board with 2” Cleat & Traction Surface
6.00
9410 1-3/4" x 9.5" Plank Board Traction Surface 7.90
9412 1-3/4" x 11.5" Plank Board Traction Surface 9.32
9204 2-1/2" x 4" Plank Board Traction Surface 4.08
9212 2-1/2" x 12" Plank Board Traction Surface 12.50
9445 1-3/4" x 4-1/2" Plank Board 3.15
9405 1-3/4" x 5-3/4" Plank Board 4.03
9401 1-3/4" x 7-1/4" Plank Board 5.25
9403 1-3/4" x 8-1/8" Plank Board 5.64
9409 1-3/4" x 10" Plank Board 7.90
9411 1-3/4" x 12" Plank Board 9.32
9203 2-1/2" x 4" Plank Board 4.08
9211 2-1/2" x 12" Plank Board 12.50
4126 3-1/2" x 3-1/2" Dunnage per foot 4.80
4129 3-1/2" x 5-3/4" Dunnage per foot 8.05
4130 5-1/2" x 5-1/2" Dunnage per foot 11.86
4133 3" x 5" Dunnage per foot 6.06
4134 3" x 5" Dunnage per foot - Traction 6.06
4135 3" x 6" Dunnage per foot 7.25
4136 3" x 6" Dunnage per foot - Traction 7.25
4179 6-7/8" x 9" Timber per foot 23.40
9000 2" Round Rod 1.50
PRODUCT LISTSpecifications & Technical Data
NOTE: Board width may vary +/- 1/8"
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
VOLUME CHANGESAMPLE MEDIUM SIZE (in.) % CHANGE
AS RECEIVED 1.355 x 1.381
168 hrs at ambient Whole NOV 40 Mud 1.403 x 1.415 +6%
AS RECEIVED 1.359 x 1.381
168 hrs at 110 °F Whole NOV 40 Mud 1.412 x 1.480 +15%
AS RECEIVED 1.357 x 1.398
168 hrs at 3 °F Whole NOV 40 Mud 1.398 x 1.371 +1%
AS RECEIVED 1.501 x 1.462
168 hrs at ambient Oil Base Mud (Disel Based) 1.536 x 1.415 -1%
AS RECEIVED 1.546 x 1.555
168 hrs at 110 °F Oil Base Mud (Disel Based) 1.600 x 1.646 +10%
AS RECEIVED 0.923 x 1.005
168 hrs at 3 °F Oil Base Mud (Disel Based) 0.922 x 0.949 -6%
HARDNESS TESTINGSAMPLE MEDIUM SHORT A AVERAGE % CHANGE
AS RECEIVED 89
168 hrs at ambient Whole NOV 40 Mud 76 -15%
AS RECEIVED 90
168 hrs at 110 °F Whole NOV 40 Mud 73 -18%
AS RECEIVED 89
168 hrs at 3 °F Whole NOV 40 Mud 90 0%
AS RECEIVED 95
168 hrs at ambient Oil Base Mud (Disel Based) 80 -16%
AS RECEIVED 94
168 hrs at 110 °F Whole NOV 40 Mud 78 -17%
AS RECEIVED 85
168 hrs at 3 °F Whole NOV 40 Mud 82 -4%
TECHNICAL SPECIFICATIONSOil Based Mud Testing
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
WEIGHT CHANGESAMPLE MEDIUM WEIGHT (g) % CHANGE
AS RECEIVED 48.5
168 hrs at ambient Whole NOV 40 Mud 46.2 -5%
AS RECEIVED 44.3
168 hrs at 110 °F Whole NOV 40 Mud 50.6 +14%
AS RECEIVED 43.1
168 hrs at 3 °F Whole NOV 40 Mud 45.2 +6%
AS RECEIVED 38.3
168 hrs at ambient Oil Base Mud (Disel Based) 38.3 0%
AS RECEIVED 57.3
168 hrs at 110 °F Oil Base Mud (Disel Based) 66.3 +16%
AS RECEIVED 13.5
168 hrs at 3 °F Oil Base Mud (Disel Based) 14.6 +12%
TECHNICAL SPECIFICATIONSOil Based Mud Testing
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
TEST METHOD RESULT
Flash Ignition Temperature ASTM D1929 620 °F (327 °C)
Self Ignition Temperature ASTM D1929 820 °F (438 °C)
Flame Spread ASTM D635 7 minutes, 30 seconds average over a 3” length, consumed 100%
Abrasion Resistance ASTM D1037ASTM F510
0.028% mass loss in 1,000 cycles22.72 mm volume loss in 1,000 cycles
Water Absorption ASTM D1037 No water absorption
Water Absorption ASTM D570 0.43%
Density ASTM D792 0.924 g/cc
Specific Gravity ASTM D792 0.982
Coefficient of Friction ASTM C1028
ASTM D2392
Static coefficient of friction: Dry = 0.49 Wet = 0.46Sliding coefficient of friction:Dry = 0.56 Wet = 0.54
Compressive Strength Modulus ASTM D143 37,225 psi
Modulus of Elasticity ASTM D4761 21,405 psi in center point loading of typical board 15,290 psi in center point loading of tongue/groove board
Modulus of Elasticity (Flexural Modulus) ASTM D198 29,815 psi in two point loading of typical board23,960 psi in two point loading of tongue/groove board
Coefficient of Linear Thermal Expansion ASTM D696 6.1 x 10 (in./in/ °C)
TECHNICAL SPECIFICATIONSMaterial Property Testing
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
DATE TEST BOARD
TIME IN TIME OUT
# OF THROWS
BROKEN TEMP (°F)
RESULT
7/7/09 1 11:00
7/8/09 8:15 3 Yes -110 Broke in half on third throw
7/7/09 4 11:00
7/8/09 8:15 5 Yes -110 Broke small piece off corner
7/8/09 2 11:25
7/9/09 9:21 5 No -90 Broke in half on fifth throw
7/8/09 4 11:25
7/9/09 9:21 5 No -90 No further damage
7/9/09 3 13:20
7/10/09 9:30 5 No -77 No damage
7/9/09 4 13:20
7/10/09 9:30 2 Yes -77 Block broke in half on second throw
3 14:00
11:00 No -60 No damage
4 14:00
7/7/09 11:00 1 Yes -60 This half piece broke on the first throw
TECHNICAL SPECIFICATIONSCold Temperature Testing
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
TO OUR VALUED CUSTOMERSA Rumber set back area offers many advantages over a traditional wood set back area. Rumber
is environmentally friendly, easy to install, extremely durable, and comes with a slip-resistant
traction surface. While Rumber is rigid and can be cut and drilled just like wood, it also lasts
5 times longer than a traditional wood surface and will not crack, splinter, or rot. This results
in less downtime for your rig. In the end, a Rumber set back area will help your company save
money, be safer, and perform better.
At Rumber, we pride ourselves on providing our customers with a great product and top
quality customer service. With that in mind, we want to update you on our product. A small
number of our customers have experienced a “bowing” effect when using Rumber in high-
temperature environments or if subjected prolonged chemical exposure from certain drilling
muds. We have had the Rumber material tested with many different drilling muds with no
reaction or “bowing.” Additionally, Rumber boards are in use on over 2,000 drilling rigs
worldwide with approximately 1% experiencing “bowing” effect. If you do experience this issue,
we recommend taking the following corrective actions:
• Trim ¼ to ½ of an inch from the end of each Rumber board in the set back area to allow for
expansion and contraction of the Rumber.
• Ensure the area below your set back area is clean, drained, and free from any accumulated
drilling mud.
• Screw down the center section of the Rumber board.
Consistency and performance are the reasons over 2,000 rigs around the world have counted
on Rumber for over 15 years. If you ever have any questions or have any issues with a Rumber
product, please do not hesitate to contact us directly at 1-877-RUMBER1 (1-877-2371) or info@
rumber.com.
We value your business and look forward to continue our services to you in the future.
Sincerely,
Brian Adams
Chief Executive Officer
Call Us Toll Free 877-RUMBER1 www.rumber.com
RUMBER SET BACK AREA
621 W. Division StreetMuenster, Texas 76252
PHONE (940) 759-41811-877-RUMBER1 (1-877-786-2371)
FAX(940) 759-4011
GET IN TOUCH
Call Us Toll Free 877-RUMBER1 www.rumber.com