serie fw90 - sodimacco · reglamento colombiano de construcciÓn sismo resistente nsr-10 tÍtulo j....

REGLAMENTO COLOMBIANO DE CONSTRUCCIÓN SISMO RESISTENTE NSR-10 TÍTULO J. Requisitos de Protección Contra Incendio en Edificaciones. J.2.5.1.5 Los muros cortafuego podrán tener aberturas solamente para dar continuidad a circulaciones horizontales, siempre y cuando se tengan un sistema de cierre hermético contra el paso de humo, que asegure como mínimo una resistencia contra fuego de una hora y con las características de apertura y cierres consignados en J.2.5.1.9. J.2.5.1.8 Las puertas de acceso o egreso principales y las que dan a la salida, conformada por el núcleo de evacuación o la escalera en todos los pisos, deberán ser de apertura manual fácil, de cierre automático y tener una resistencia a la acción del fuego no inferior a una hora. Las puertas pueden diseñarse de acuerdo con la Norma NFPA 80 , Norma para puertas y ventanas a prueba de incendios. J.2.5.2.7 Los muros de cerramiento de escaleras y ascensores, buitrones, ductos para basuras y corredores de evacuación, deben ser diseñados y construidos sin interrupción desde el cimiento hasta el techo de la estructura. Estos muros deberán cumplir con las especificaciones para muros cortafuegos contenidas en J.2.5.1.1. Las aberturas en los muros a que hace referencia este artículo deberán tener puertas con una resistencia al fuego no inferior a una hora. Estas puertas deberán, en condiciones normales, permanecer cerradas. What is NFPA 80: This standard regulates the installation and maintenance of assemblies and devices used to protect openings in walls, floors, and ceilings against the spread of fire and smoke within, into, or out of buildings. What does NFPA 80 address: NFPA 80 addresses general requirements and provisions for care and maintenance of fire doors and other opening protectives., Opening protectives that are addressed include swinging doors, horizontally sliding doors, vertically sliding fire doors, rolling steel doors, fire shutters, service counter fire doors, hoistway doors for elevators and dumbwaiters, chute doors, access doors, fire windows, glass block assemblies, fire dampers, and fabric fire safety curtains. TAMAÑOS DISPONIBLES EN INVENTARIO )Medidas en mm( PUERTAS CORTAFUEGO FW90 2200 X 1000 2300 X 1000 2400 X 1000 CERTIFICATE OF COMPLIANCE Certificate Number 20120912-R26861 Report Reference R26861-20110527 Issue Date 2012-SEPTEMBER-12 William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus Page 1 of 2 Issued to: RAV-BARIACH (08) INDUSTRIES LTD HAOFE 31 ST 78780 ASHKELON ISRAEL 2037020 (Party Site) This is to certify that representative samples of SPECIAL-PURPOSE FIRE DOORS See Addendum Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: "Fire Tests of Door Assemblies" ANSI/UL 10B Canadian National Standard, “Method for Fire Tests of Door Assemblies”, CAN4-S104-10 Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information Only those products bearing the UL Classification Mark for the U.S. and Canada should be considered as being covered by UL's Classification and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements. The UL Classification Mark includes: the UL in a circle symbol: with the word “CLASSIFIED” (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of ULʼs evaluation of the product; and the product category name (product identity) as indicated in the appropriate UL Directory. The UL Classification Mark for Canada includes: the UL Classification Mark for Canada: with the word “CLASSIFIED” (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of ULʼs evaluation of the product; and the product category name (product identity) in English, French, or English/French as indicated in the appropriate UL Directory. Look for the UL Classification Mark on the product. CERTIFICADAS UL SERIE FW90

Upload: duongtram

Post on 14-Oct-2018

228 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SERIE FW90 - SodimacCO · REGLAMENTO COLOMBIANO DE CONSTRUCCIÓN SISMO RESISTENTE NSR-10 TÍTULO J. Requisitos de Protección Contra Incendio en Edificaciones. J.2.5.1.5

REGLAMENTO COLOMBIANO DE CONSTRUCCIÓN SISMO RESISTENTE NSR-10 TÍTULO J. Requisitos de Protección Contra Incendio en Edificaciones.

J.2.5.1.5 Los muros cortafuego podrán tener aberturas solamente para dar continuidad a circulaciones horizontales, siempre y cuando se tengan un sistema de cierre hermético contra el paso de humo, que asegure como mínimo una resistencia contra fuego de una hora y con las características de apertura y cierres consignados en J.2.5.1.9. J.2.5.1.8 Las puertas de acceso o egreso principales y las que dan a la salida, conformada por el núcleo de evacuación o la escalera en todos los pisos, deberán ser de apertura manual fácil, de cierre automático y tener una resistencia a la acción del fuego no inferior a una hora. Las puertas pueden diseñarse de acuerdo con la Norma NFPA 80, Norma para puertas y ventanas a prueba de incendios. J.2.5.2.7 Los muros de cerramiento de escaleras y ascensores, buitrones, ductos para basuras y corredores de evacuación, deben ser diseñados y construidos sin interrupción desde el cimiento hasta el techo de la estructura. Estos muros deberán cumplir con las especificaciones para muros cortafuegos contenidas en J.2.5.1.1. Las aberturas en los muros a que hace referencia este artículo deberán tener puertas con una resistencia al fuego no inferior a una hora. Estas puertas deberán, en condiciones normales, permanecer cerradas.

What is NFPA 80: This standard regulates the installation and maintenance of assemblies and devices used to protect openings in walls, floors, and ceilings against the spread of fire and smoke within, into, or out of buildings. What does NFPA 80 address: NFPA 80 addresses general requirements and provisions for care and maintenance of fire doors and other opening protectives., Opening protectives that are addressed include swinging doors, horizontally sliding doors, vertically sliding fire doors, rolling steel doors, fire shutters, service counter fire doors, hoistway doors for elevators and dumbwaiters, chute doors, access doors, fire windows, glass block assemblies, fire dampers, and fabric fire safety curtains.

TAMAÑOS DISPONIBLES EN INVENTARIO)Medidas en mm(

PUERTAS CORTAFUEGO FW90

2200X1000

2300X1000

2400X1000

C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20120912-R26861

Report Reference R26861-20110527 Issue Date 2012-SEPTEMBER-12

William R. Carney, Director, North American Certification Programs

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus

Page 1 of 2

Issued to: RAV-BARIACH (08) INDUSTRIES LTD

HAOFE 31 ST 78780 ASHKELON ISRAEL 2037020 (Party Site)

This is to certify thatrepresentative samples of

SPECIAL-PURPOSE FIRE DOORS

See Addendum

Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate.

Standard(s) for Safety: "Fire Tests of Door Assemblies" ANSI/UL 10B Canadian National Standard, “Method for Fire Tests of Door Assemblies”, CAN4-S104-10

Additional Information: See the UL Online Certifications Directory at www.ul.com/database for additional information

Only those products bearing the UL Classification Mark for the U.S. and Canada should be considered as being covered by UL's Classification and Follow-Up Service and meeting the appropriate U.S. and Canadian requirements.

The UL Classification Mark includes: the UL in a circle symbol: with the word “CLASSIFIED” (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of ULʼs evaluation of the product; and the product category name (product identity) as indicated in the appropriate UL Directory. The UL Classification Mark for Canada includes: the UL Classification

Mark for Canada: with the word “CLASSIFIED” (as shown); a control number (may be alphanumeric) assigned by UL; a statement to indicate the extent of ULʼs evaluation of the product; and the product category name (product identity) in English, French, or English/French as indicated in the appropriate UL Directory.

Look for the UL Classification Mark on the product.

CERTIFICADAS UL

SERIE FW90