sepco steel electric conduit & cable fittings - nm cable fittings
DESCRIPTION
SEPCO Steel Electric Products Company was founded in 1938 as a metal fabricating and stamping company by Morris Reddock and his son Philip, and incorporated in 1952. SEPCO carried a product line which included EMT and rigid one-hole and two-hole pipe straps, reducing washers and switch box supports. Malleable iron, steel and die-cast fittings were added to the product line and SEPCO now currently carries approximately 2,000 SKU's with trade sizes 1/2" - 6" on most product groups and is a leading manufacturer in the elctrical industry. All SEPCO products carry the full UL listing.TRANSCRIPT
Zinc Romex Connectors and Service Entrance Connectors . . . .114Zinc Non-Watertight Short Body Connectors . . . .115
Zinc Two Screw Take-All Connectors . . . .116Zinc Clamp Type Connectors and Combination Couplings . . . .117
Zinc Underground Feeder Connectors . . . .118
NM CABLE FITTINGS
SEPCO 2011 (5) 113-118:Layout 1 9/6/11 11:56 AM Page 1
114 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
NMCABLEFITTIN
GS
Zinc Cable and Conduit ConnectorsFor Non-Metallic Sheathed Cable
®
®
Application:Used to connect non-metallicsheath cable and flexible cordfrom 0.290 to 0.450 in. indiameter to outlet boxes,enclosures, or racewaysystems in dry locations.
Features:• Assembled with die castlocknut and tri-combo screws
Standard Materials:Zinc Die Cast
UL Listed:E198258
Type C23
CATALOGNUMBER
TRADESIZE
DIM AMIN
DIM AMAX
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C23 3/8” 0.64 0.18 1.21 100 1000 5 31232
CATALOGNUMBER
TRADESIZE
DIMA
DIMB
DIMC
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
SC1 3/4” 0.450 1.031 1.220 25 250 10 32012SC2 1” 0.645 1.190 1.500 20 200 16 32022SC3 1-1/4” 0.660 1.330 1.900 10 100 25 32031SC4 1-1/2” 0.740 1.470 2.115 10 100 36 32042SC5 2” 0.750 1.620 2.640 5 50 50 32052
CATALOG NUMBER SE/OVAL DIAMETER IN. SER/ROUND DIAMETER IN.
SC1Non-Metallic Cable 10-3 through 8-2
(.52 by .61) and (.51 by .80) (.57) and (.69)
SC2Non-Metallic Cable 10-3 through 4-3
(.51 by .80) and (.62 by .975) (.69) and (.92)
SC3 (1.065 by 0.635) and (1.250 by 0.740) -SC4 (1.065 by 0.635) and (1.250 by 0.740) -SC5 (1.405 by 0.875) and (1.450 by 0.875) -
Romex Connector
Type SC1
Service Entrance Connector
Application:Non-watertight. To make atermination of non-metallicsheathed cable and serviceentrance.
Features:• Assembled with die castlocknut and tri-combo screws
Standard Materials:Zinc Die Cast
UL Listed:E198258
One or two non-metallic cable 14-2 to 12-2 or 0.29” to 0.45” diameter flexible cord
SEPCO 2011 (5) 113-118:Layout 1 9/6/11 11:56 AM Page 2
115(718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223
www.sepco-usa.com
NMCABLEFITTIN
GS
Application:Used with locknut to terminateservice entrance cable toenclosure.
Features:• Assembled with die castlocknut and tri-combo screws
• For round cable
Standard Materials:Zinc Die Cast
UL Listed:E198258
For Non-Metallic Sheathed Cable and Service Entrance Cable
Zinc Non-Watertight Short Body Connectors
Type C50S
Type C50ST
CATALOGNUMBER
TRADESIZE
DIM AMIN.
DIM AMAX.
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C50S 1” 0.620 1.140 1.500 10 100 15 64601C51S 1-1/4” 0.700 1.380 1.900 10 100 24 64602C52S 1-1/2” 0.750 1.610 2.115 10 100 34 64603C53S 2” 0.900 2.040 2.640 5 50 46 64604
CATALOGNUMBER
TRADESIZE
DIM AMIN.
DIM AMAX.
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C50ST 1” 0.620 1.140 1.500 10 100 15 90138C51ST 1-1/4” 0.700 1.380 1.900 10 100 24 90139C52ST 1-1/2” 0.750 1.610 2.115 10 100 34 90140C53ST 2” 0.900 2.040 2.640 5 50 46 90141
Insulated
®
CATALOG NUMBER SE/OVAL DIAMETER IN. SER/ROUND DIAMETER IN.
C50S and C50STNon-Metallic Cable 10-3 through 4-3
(.51 by .80) and (.62 by .975) (.69) and (.92)
C51S and C51STNon-Metallic Cable 4-3 through 2-3
(.67 by 1.06) and (.73 by 1.235) 1.19
C52S and C52ST (1.15 by 0.73) and (1.41 by 0.89) 1.48C53S and C53ST (1.405 by 0.875) and (1.450 by 0.875) -
SEPCO 2011 (5) 113-118:Layout 1 9/6/11 11:56 AM Page 3
116 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
Zinc Two Screw Take-All ConnectorsFor Armored Cable, Metal Clad, Flexible Metallic Conduitand Non-Metal Sheathed Cable
Type C50Z
Type C50ZT
CATALOGNUMBER
TRADESIZE
DIM AMIN.
DIM AMAX.
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C48Z 1/2” 0.40 0.95 1.87 25 250 10 32482C49Z 3/4” 0.50 1.10 1.84 20 200 12 32492C50Z 1” 0.62 1.14 2.00 10 100 15 32502C51Z 1-1/4” 0.50 1.38 2.28 10 100 25 32512C52Z 1-1/2” 0.75 1.61 2.49 10 100 38 32522C53Z 2” 0.90 2.04 3.35 5 50 50 32632
CATALOGNUMBER
TRADESIZE
DIM AMIN.
DIM AMAX.
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C48ZT 1/2” 0.40 0.95 1.87 25 250 10 34867C49ZT 3/4” 0.50 1.10 1.84 20 200 12 34967C50ZT 1” 0.62 1.14 2.00 10 100 15 35067C51ZT 1-1/4” 0.50 1.38 2.28 10 100 25 35167C52ZT 1-1/2” 0.75 1.61 2.49 10 100 38 35267C53ZT 2” 0.90 2.04 3.35 5 50 50 35367
Insulated
Application:Used with locknut to terminateservice entrance cable toenclosure.
Features:• Take-all Type• Concrete tight when tapped
Standard Materials:Zinc Die Cast
UL Listed:E309514
NMCABLEFITTIN
GS
C US
SEPCO 2011 (5) 113-118:Layout 1 9/6/11 11:56 AM Page 4
117(718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223
www.sepco-usa.com
NMCABLEFITTIN
GS
Application:To terminate one or morenonmetallic sheathed cablesto a 1/2 inch knockout in a drylocation box or enclosure.Also used in “old work”locations. Material finish isbright zinc plated.
Standard Materials:Steel
Standard Finish:Zinc Plated
Application:Used to join 1/2” steel EMT to12-2 non-metallic sheath cable.
Features:• Assembled with tri-comboscrews
Standard Materials:Zinc Die Cast
UL Listed:E198258
Application:Used to connect undergroundfeeder cables to enclosures inwet locations.
Features:• Assembled with a rubbergrommet and steel washer
Material/Finish:Zinc Die Cast
UL Listed:E198258
For Non-Metallic Sheathed Cable
Zinc Cable and Conduit Fittings
Type C24
Type 170C
CATALOGNUMBER
TRADESIZE
DIMA
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
C24 1/2” 1.33 0.64 100 1000 4 33247C54 3/4” 1.75 0.76 50 500 7 33547C64 1-1/4” 2.25 0.85 25 250 11 33647C74 1-1/2” 2.73 0.84 20 200 14 33747
CATALOGNUMBER
TRADESIZE
DIMA
DIMB
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
*170C 1/2” E.M.T. - 3/8” Flex 1.28 1.14 50 500 8 51702
Combination Couplings
Clamp Type
* EMT to NM Cable
®
®
SEPCO 2011 (5) 113-118:Layout 1 9/6/11 11:56 AM Page 5
118 (718) 259-6100 • Fax: (718) 331-1874 • 1-800-626-1223www.sepco-usa.com
NMCABLEFITTIN
GS
Application:Used to connect undergroundfeeder cables to enclosures inwet locations.
Features:• Assembled with a rubbergrommet and steel washer
Material/Finish:Zinc Die Cast
UL Listed:E198258
For Non-Metallic Sheathed Cable
Zinc Cable and Conduit Fittings
Type UF10
CATALOGNUMBER
TRADESIZE TYPE
MINIMUMWIRE SIZEA B
MAX. WIRE SIZEGROM. OPENINGA B
UNITPACK
STANDARDPACK
WEIGHT (LBS.)PER 100
NAED MFG #78-5994UPC/DCI #
UF10 1/2” 12-2 0.100 0.475 0.220 0.440 25 250 17 49899
UF20 3/4” 12-3 0.175 0.800 0.220 0.660 25 250 26 49900
Underground Feeder Connectors (UF)For Service Entrance Cable and Non-Metallic Sheathed Cable
®
SEPCO 2011 (5) 113-118:Layout 1 9/6/11 11:57 AM Page 6