Sensor Holder for Dexis Sensors

TM

Accessories

Holder Fully autoclavableMax. 273ºF (134ºC)Disposable

**15300510

TrollByte Rayzor™ 510*

TrollByte Rayzor™ Black15300012 *

Aiming ring1519001001* Bite block

1519002003*

TrollByte Rayzor™ Arm15300010 *

15300020

TrollByte Rayzor™ Tab*

TrollBag Rayzor™ 51013190510 *

Attachment and removal

Aiming

Bitewings

Anterior PA

Posterior PA

Page 4-6

Page 7-8

Page 9-10

Page 11

Page 12

Tab Version

Bitewings

Anterior/Posterior PA

Page 13

Page 14

Arm VersionShown with the disposable arm, the functionof the autoclavable black arm is the same.

Fully autoclavableMax. 273ºF (134ºC)Disposable

Put the holder on the sensor

The end with the slot must face the cord.

Put the TrollBag Rayzor 510 sensor cover on

The sensor holder is fully autoclavable. Configure the sterilization program in accordance with the autoclave manufacturer’s instructions. Maximum temperature 273ºF (134ºC).Please note: The slot extension on the side should be withdrawn during autoclaving.

4

Attachment of the arm/tab

1. Insert the toe.

2. Press forward.

3. Ease the heel in and release.

5

Toe Heel

When attatching the arm/tab, it is very important to be careful when you ease the heel in (img. 1-3). Excessive force can puncture the sensor cover.

3. Press forward. 4. Ease the heel out.

Removal of the arm/tabNOTE: This procedure is shown without the sensor cover for detail.

1.

6

The transparent arm, tab and the sensor cover are disposables, single use only.The black arm is fully autoclavable,maximum temperature 273ºF (134ºC).When removing the arm/tab, it is very important to be careful when you lift the heel.Excessive force can puncture the sensor cover.

Removal of the arm/tabNOTE: This procedure is shown without the sensor cover for detail.

X-ray tube

The indicator pin is removable.

AimingThe indicator pin shows the center of the sensor.

7

Anterior PA

Posterior PA

Anterior PAPosterior PA

Bitewing

Aiming ring

Image and ring position

Aiming ring attachment

Dots facing the sensor.

The aiming ring is fully autoclavable. Configure the sterilization program in accordance with the autoclave manufacturer’s instructions. Maximum temperature 273ºF (134ºC).

8

Position for the ring,dots facing the sensor.

HorizontalBitewing

9

Position for the ring,dots facing the sensor.

VerticalBitewing

10

Position for the ring,dots facing the sensor.

Anterior PA

Use the bite block for all anterior periapical images. The bite block works as an extension of the biteplane and it allows you to place sensor as posterior as possible while maintaining support from the incisal edges of the front teeth.

11

The bite block is fully autoclavable. Configure the sterilization program in accordance with the autoclave manufacturer’s instructions. Maximum temperature 273ºF (134ºC).

Position for the ring,dots facing the sensor.

Posterior PA

Pull out the appropriate slot, for upper right/lower left or upper left/lower right quadrandts.

12

Horizontal Bitewing

Vertical Bitewing

13

Tab Version

Posterior PA

Pull out the appropriate slot for upper right/lower left or upper left/lower right quadrandts.

Anterior PA

14

TrollDental is committed and dedicated to the dentist and patient. We believe that providing dentists with intelligent quality tools improves the ability of the

dentist to more precisely diagnose and treat patients in a gentle way. Our goal is to provide tools that will ensure the success of the dentist and health of the patient.

Trollhätteplast AB • Box 900 • S-461 29 Trollhättan • SWEDEN

US Patent 7,140,770 B2 • France Patent 1537453 • Great Britain Patent 1537453Germany Patent 60319389.7 • Japan Patent 4464820 • Sweden Patent 0202371-1

To make excellent x-rays please note:

Position the sensor where most space excist, normally the mid-palatal area.The TrollByte Rayzor gives you the angle and position of the sensor. How you use that information to acquire perfect images is up to you as a skilled dentist.

You can find more information at

www.trolldental.com

15300510/0022016-07-07

Trollhätteplast ABInstallatörvägen 9461 37 Trollhättan • Sweden+46 520 48 90 50 • www.trolldental.com

TrollByte Rayzor 510 shall only be used as a holder for dental x-ray with Dexis digital sensor. The manufacturer and its dealers are not liable for any other use of the product.Always use a sensor cover to protect the sensor while taking x-rays. Clean prior to first use.TrollByte Rayzor 510 can be cleaned by wiping it down with alcohol, washing it in adishwasher/disinfector, or autoclave. Reuse without disinfection will lead to contamination and possible spread of infection.Store at room temperature, protected from dust and humidity.Do not expose to direct sunlight.

Autoclave procedure

TrollByte Rayzor 510 is autoclavable. Configure the sterilization program in accordance with the autoclave manufacturer’s instructions. Maximum temperature 273ºF (134ºC).Please note that the retractable slots should be withdrawn during autoclaving.Place in the middle of the autoclave, not against the autoclave’s walls or heating element.Warning: If the holder is exposed to pressure or weight exerted by other objects during autoclaving, it may deform.Please note: Any method of sterilization will shorten the life span of plastic parts.

Warranty

TrollByte Rayzor 510 is manufactured using carefully selected plastic raw materials in order to achieve the product’s unique characteristics. However, all plastic products have a limited service lifetime, and should be replaced at regular intervals. All types of cleaning reduce the product’s service lifetime.The product should be replaced when its functioning and/or performance no longer satisfies the specifications in this manual.The manufacturer guarantees that the product will function as described in these instructions for 1 year after first use or a maximum of 75 autoclave cycles.

TrollByte Rayzor™ 51015300510

Dexis is a trademark of Dexis, LLC of Hatfield, PA