self-propelled articulating booms - hdw · self-propelled articulating booms ... (2 on chassis, 2...

2
www.genielift.co.uk www.genielift.me Self-Propelled Articulating Booms Specifications Model Z-62/40 * The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height. ** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only. *** Gradeability applies to driving on slopes. See operators manual for details regarding slope ratings. **** Weight will vary depending on options and/or country standards. Range Of Motion Z-62/40 Z -62/40 A B D E A B C D E F G 03/16 Part No. B127306UK C G F -10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft -3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m 80 ft 24.38 m 70 ft 21.34 m 60 ft 18.29 m 50 ft 15.24 m 40 ft 12.19 m 30 ft 9.14 m 20 ft 6.1 m 10 ft 3.05 m 0 ft 0 m -10 ft -3.05 m Measurements Metric US Working height maximum* 20.87 m 67 ft 11 in Platform height maximum 18.87 m 61 ft 11 in Horizontal reach maximum 12.42 m 40 ft 5 in Up and over clearance maximum 7.80 m 25 ft 7 in Platform length - 8 ft / 6 ft model 0.91 m /0.76 m 3 ft / 2 ft 6 in Platform width - 8 ft / 6 ft model 2.44 m /1.83 m 8 ft / 6 ft Height - stowed 2.56 m 8 ft 6 in Height - transport (jib tucked under) 2.90 m 9 ft 6 in Length - stowed 9.25 m 30 ft 3 in Length - transport (jib tucked under) 7.58 m 24 ft 10.5 in Width 2.49 m 8 ft 2 in Wheelbase 2.49 m 8 ft 2 in Ground clearance - center 0.37 m 1 ft 2.5 in Productivity Lift capacity 227 kg 500 lbs Platform rotation 180° 180° Vertical jib rotation 135° 135° Turntable rotation 360° continuous Turntable tailswing zero zero Drive speed - stowed 4.8 km/h 3.0 mph Drive speed - raised** 1.1 km/h 0.68 mph Gradeability - 2WD - stowed*** 30% 30% Gradeability - 4WD - stowed*** 45% 45% Turning radius - inside 2.8 m 9 ft 2 in Turning radius - outside 5.57 m 18 ft 9 in Controls 12V DC proportional Tyres 355/55D 625 Power Power source Deutz Stage IIIB 2.9L4 4 cylinder turbo diesel 55 kW (74 hp), water cooled Deutz Stage IIIA 2011 L04i 4 cylinder turbo diesel 55 kW (74 hp) Deutz diesel 2.9L4 36 kW (48 hp) Perkins Stage IIIB 404F-22 4 cylinder diesel 36 kW (48 hp) Ford MSG425 gas/LPG 56 kW (75 hp) Auxiliary power unit 12V DC 12V DC Hydraulic tank capacity 132.5 L 35 gal Fuel tank capacity 136.3 L 36 gal Sound & Vibration Levels Sound pressure level (ground workstation) 84 dBA 84 dBA Sound pressure level (platform workstation) 75 dBA 75 dBA Vibration <2.5 m/s² <8 ft 2 in/s² Weight**** CE 4WD (foam filled tyres) 10,281 kg 22,665 lbs Standards Compliance EU Directives: 2006/42/EC - Machinery (harmonized standard EN280:2013); 2004/108/EC (EMC); 2000/14/EC (Outdoor Noise)

Upload: truongduong

Post on 13-Apr-2018

221 views

Category:

Documents


4 download

TRANSCRIPT

www.genielift.co.uk www.genielift.me

Self-Propelled Articulating Booms

Specifications Model Z-62/40

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.

** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only.

*** Gradeability applies to driving on slopes. See operators manual for details regarding slope ratings.

**** Weight will vary depending on options and/or country standards.

Range Of Motion Z-62/40

Z™-62/40

A

B

D

E

A

B

C

D

E

F

G

03/16 Part No. B127306UK

C

G

F

-10 ft 0 ft 10 ft 20 ft 30 ft 40 ft 50 ft-3.05 m 0 m 3.05 m 6.1 m 9.14 m 12.19 m 15.24 m

80 ft24.38 m

70 ft21.34 m

60 ft18.29 m

50 ft15.24 m

40 ft12.19 m

30 ft9.14 m

20 ft6.1 m

10 ft3.05 m

0 ft0 m

-10 ft-3.05 m

Measurements Metric US

Working height maximum* 20.87 m 67 ft 11 inPlatform height maximum 18.87 m 61 ft 11 inHorizontal reach maximum 12.42 m 40 ft 5 inUp and over clearance maximum 7.80 m 25 ft 7 in Platform length - 8 ft / 6 ft model 0.91 m /0.76 m 3 ft / 2 ft 6 in Platform width - 8 ft / 6 ft model 2.44 m /1.83 m 8 ft / 6 ft Height - stowed 2.56 m 8 ft 6 in Height - transport (jib tucked under) 2.90 m 9 ft 6 in Length - stowed 9.25 m 30 ft 3 in Length - transport (jib tucked under) 7.58 m 24 ft 10.5 in Width 2.49 m 8 ft 2 in Wheelbase 2.49 m 8 ft 2 in Ground clearance - center 0.37 m 1 ft 2.5 in

Productivity

Lift capacity 227 kg 500 lbsPlatform rotation 180° 180°Vertical jib rotation 135° 135°Turntable rotation 360° continuousTurntable tailswing zero zeroDrive speed - stowed 4.8 km/h 3.0 mphDrive speed - raised** 1.1 km/h 0.68 mphGradeability - 2WD - stowed*** 30% 30%Gradeability - 4WD - stowed*** 45% 45%Turning radius - inside 2.8 m 9 ft 2 inTurning radius - outside 5.57 m 18 ft 9 inControls 12V DC proportionalTyres 355/55D 625

Power

Power source Deutz Stage IIIB 2.9L4 4 cylinder turbo diesel 55 kW (74 hp), water cooled Deutz Stage IIIA 2011 L04i 4 cylinder turbo diesel 55 kW (74 hp) Deutz diesel 2.9L4 36 kW (48 hp) Perkins Stage IIIB 404F-22 4 cylinder diesel 36 kW (48 hp) Ford MSG425 gas/LPG 56 kW (75 hp)Auxiliary power unit 12V DC 12V DCHydraulic tank capacity 132.5 L 35 galFuel tank capacity 136.3 L 36 gal

Sound & Vibration LevelsSound pressure level (ground workstation) 84 dBA 84 dBASound pressure level (platform workstation) 75 dBA 75 dBAVibration <2.5 m/s² <8 ft 2 in/s²

Weight****

CE 4WD (foam filled tyres) 10,281 kg 22,665 lbs

Standards Compliance EU Directives: 2006/42/EC - Machinery (harmonized standard EN280:2013); 2004/108/EC (EMC); 2000/14/EC (Outdoor Noise)

Features

Self-Propelled Articulating Booms

(1) Factory-fit option only(2) Available on selected models only. See your Genie

representative for further information.(3) Includes a first 2 years subscription

Z™-62/40

Platform Options• Steel 2.44 m (8 ft) (standard)• Steel 1.83 m (6 ft)• 2.44 m (8 ft) tri-entry**

Jib• 1.52 m (5 ft) jib boom

Engine Options• Deutz Stage IIIB turbo diesel 55 kW

(74 hp), water cooled • Deutz Stage IIIA turbo diesel 55 kW

(74 hp) • Deutz diesel 36 kW (48 hp) • Perkins Stage IIIB diesel 36 kW (48 hp)• Ford MSG425 gas/LPG 56 kW (75 hp)

Drive Options• 2 x 4• 4 x 4

Axle Options• Active oscillation (standard on 4WD)• Non-oscillating

Tyre Options• Rough terrain air-filled (standard)• Rough terrain foam-filled• Rough terrain non-marking

(air or foam-filled)• Sealant treated air-filled

Productivity Options • Platform top auxiliary rail• Hydraulic oil cooler (2)

• Air line to platform (1)

• Power to platform (incl. plug, socket and ground fault interrupt leakage on request)

• Work lights package (2 on chassis, 2 on platform)

• Dual axis joystick steering• Biodegradable hydraulic oil (1)

• Aircraft protection kit (1,2): platform foam padding and padded disable system

• Hostile environment kit (1): cylinder bellows, boom wiper seals platform and ground control box covers

• Deluxe hostile environment kit (1,2) adds to basic kit center turntable shield, ring gear guard, tail pipe guard, engine cover flaps and air pre-cleaner

• Tilt cut-out option• Track & Trace (3) (GPS unit providing

machine location & operating information)

• Panel cradle package (1,2)

• Lockable platform control box covers• Operator Protective Structure• Operator Protective Alarm• Keypad unlocking device

Power Options• Engine gauge package • AC generator packages (110V/60Hz

220V/50Hz, 3000W) (1)

• Diesel air intake pre-cleaner (1,2)

• Diesel catalytic scrubber muffler (1)

• Low temperature cut-out module• Engine heater (2)

• Refinery kit with spark arrestor and electric or mechanical Chalwyn valve (2)

Options & Accessories

Measurements• 20.87 m (67 ft 11 in) working height• 12.42 m (40 ft 5 in) horizontal reach• 7.80 m (25 ft 7 in) up and over clearance• Up to 227 kg (500 lbs) lift capacity

Productivity• Self-levelling platform• Hydraulic platform rotation• Proportional joystick controls• Telematics-Ready Connector • Thumb rocker steering• Drive enable• AC power cord to platform• Horn• Hour meter• Tilt alarm• Descent & travel alarms• Flashing beacon• 360° continuous turntable rotation• Locking turntable covers• Zero tailswing• Positive traction drive• 2 speed wheel motors• Certified load sensor• Entry toe boards

Power• 12V DC auxiliary power• Engine protection package• Anti-restart engine protection• Auto engine fault shutdown• Intake air heater (Deutz engine)

Easily Configured To Meet Your Needs Standard Features

03/16 Part No. B109364UK

sretuaeFturesea Standard F

orP-flSe-62/40™Z

Easily

citr Adelleop

our NeedsYYour Needso Meet TTo Meet Configured

oo Bgnitulaac

Accessories Options &

som

oportional joystic Pr•Hydraulic platform •Self-levelling platfo•

oductivityPr

Up to 227 kg (500 •7.80 m (25 ft 7 in) •12.42 m (40 ft 5 in •20.87 m (67 ft 11 •

ementsMeasur

(74 Deu •

Engin

1.52 •

Jib

2.44 •Stee •Stee •

Platfo

ols ck controtation r

orm

0 lbs) lift capacity up and over clearance

each n) horizontal r in) working height

hp) water cooled tz Stage IIIB turbo diesel 55 kW

e Options

2 m (5 ft) jib boom

4 m (8 ft) tri-entry**el 1.83 m (6 ft)

d)el 2.44 m (8 ft) (standar

orm Options

t ti kit ft AiBiodegradable hydraulic oil •Dual axis joystick steering•on platform)

ork lights package W•equest)r

ound fault interrupt leakage on and grPower to platform (incl. plug, socket •

(1)Air line to platform •

(2)Hydraulic oil cooler •Platform top auxiliary rail•

oductivity OptionsPr

W

l tf (1 2)

(1) ulic oil ering

(2 on chassis, 2

rrupt leakage on cl. plug, socket

rail

ntable cLocking tur•360° continuous tu•Flashing beacon•Descent & travel a•

ilt alarmT•Hour meter•

nHor•d to AC power cor•

Drive enable•ocker steeThumb r•

elematics-Ready TTelematics-Ready Connector •

Axle O

4 x 4•2 x 4•

Drive

d For•Perk •Deu •(74 Deu •(74

coversotationntable r ur

larms

platform

ering Connector

Options

4 4

Options

d MSG425 gas/LPG 56 kW (75 kins Stage IIIB diesel 36 kW (48 tz diesel 36 kW (48 hp)

hp) tz Stage IIIA turbo diesel 55 kW

hp), water cooled

machine location & operating (GPS (3)race rack & T Trace TTrack & T•

ilt cut-out optionT•cover flaps and air pr

d, tail p ring gear guarto basic kit center tur

on Deluxe hostile envir•ol b ound contrand gr

bellows, boom wiper seals platform onment k Hostile envir•

systemfoam padding and pa

otection kit craft prAir•

hp) hp)

W

perating oviding S unit pr

e-cleanerd, engine pipe guar

ntable shield, r adds (1,2)nment kit

ox covers seals platform

: cylinder (1) kit

added disable : platform (1,2)

A i f l estart engine Anti-r•

otection Engine pr•12V DC auxiliary p•

Power

ds Entry toe boar•Certified load sens•2 speed wheel mo•Positive traction dr•

o tailswingZer•ntable cLocking tur•

Sea •(air o Rou •Rou •Rou •

e OyrTTyr

Non•Activ •

h dotection pr

package power

sor otors

rive

covers

-filledeated airlant tr or foam-filled)gh terrain non-marking gh terrain foam-filled

d)-filled (standargh terrain air

Options

n-oscillatingd on 4WD)ve oscillation (standar

p

220V/50Hz 3000W) AC generator packages (110V/60Hz •Engine gauge package •

Power Options

• Keypad unlocking de otective Alarm• Operator Protective Structur• Operator Pr

Lockable platform contr•Panel cradle package •information)machine location & operating

)

(1) ges (110V/60Hz

ge

evice Alarm

e Structurol box covers ntr

(1,2) e

perating

Intake air heater (D •Auto engine fault s•

Deutz engine) shutdown

electric or mechanical Chalwyn valve Refinery kit with spark arr•

(2)Engine heater •e cut- Low temperatur•

Diesel catalytic scrubber muf•e-c Diesel air intake pr•

220V/50Hz, 3000W)

(2) al Chalwyn valve estor and k arr

-out module

(1)fler ber muf

(1,2)cleaner

Include (3)ese eprr

vailab AAvailable on selected models only(2) Factory (1)

es a first 2 years subscriptionentative for further information.

. See your Genie ble on selected models only y-fit option only

03/16 Part No. B109364UK

United KingdomThe Maltings, Wharf Road, Grantham NG31 6BH, T: +44 800 988 3739 (toll free), Fax +44 (0)1476 584334, Email [email protected]

www.genielift.co.uk www.genielift.me

Visit www.genielift.co.uk/locations to view our global locations list.

Worldwide Manufacturing And DistributionAustralia · Brazil · Caribbean · Central America · China · France · Germany · Italy · Japan · Korea · Mexico · Russia · Southeast Asia · Spain · Sweden · United Arab Emirates · United Kingdom · United States

Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2016 Terex Corporation.