sekamatik series · the sekamatik 10e 7m is a compact lifting station for removal of wastewater...
TRANSCRIPT
Sekamatik seriesPREFABRICATED LIFTING STATIONS FOR RESIDENTIAL, COMMERCIAL OR INDUSTRIAL APPLICATIONS
We’ve been able to create an optimized solution for domestic, commercial and industrial wastewater handling. Our stations are prefabricated and available in various sizes supplied complete with all the necessary equipment to allow ease and speed of installation.
Our customers include architects, builders merchants, civil contractors, consultants, distribution network, facility managers, house builders, local authorities, property developers, specifiers and many more.
Applications.Collection and pressurization of sewage, grey water, rainwater coming from toilets, hand basins, showers, washing machines and bathrooms located in apartments, multi-family houses, office buildings, commercial malls etc.
Pipework.Domestic units come with a small bore discharge pipe where gravity flow is not possible.
Consultants / Architects.When specifying our packaged pumping stations we offer a full technical back-up, drawings, design guidelines and installation recommendations.
Builders & Contractors.Xylem offers a broad range of packaged pumping stations for various applications and requirements.
RESIDENTIAL BUILDINGS
Apartments, cellars / basements, holiday lets, house extensions, outbuildings and refurbishments.
Wastewater is a demanding process, requiring continuous performance, day in day out. Xylem Lowara solutions meet these challenges, providing trusted service in tough conditions. We have a long tradition of innovation in pumping technology.
2
INDUSTRIAL APPLICATIONS
Factories and Industrial Buildings.
COMMERCIAL BUILDINGS
Airports, hotels, hospitals, offices, multi dwelling units, schools & universities, shopping centers, sports centers, tower blocks, train stations, warehouses or remote locations.
Wastewater is a demanding process, requiring continuous performance, day in day out. Xylem Lowara solutions meet these challenges, providing trusted service in tough conditions. We have a long tradition of innovation in pumping technology.
3
The Lowara Sekamatik series is a comprehensive range of wastewater lifting stations for the collection and pressurization of rain/clean/grey water and sewage for residential and commercial building applications.
Sekamatik 200Ideal for secondary bathrooms/ guest rooms
Tank volume 40 ltMax flow 22 m3/hMax head 14 m1 pump
Sekamatik 100Ideal for complete bathrooms
Tank volume up to 95 ltMax flow 50 m3/hMax head 15 m1 or 2 pumps
Sekamatik 10Ideal for secondary bathrooms/ guest rooms
Tank volume up to 11 ltMax flow 15 m3/hMax head 17 m1 pump
Sekamatik 300Ideal for complete bathrooms
Tank volume up to 600 ltMax flow 60 m3/hMax head 18 m2 pumps
Sekamatik 50Ideal for complete bathrooms
Tank volume 46 ltMax flow 21 m3/hMax head 33 m1 or 2 pumps
Sekamatik 400/800Ideal for complete bathrooms
Tank volume up to 800 ltMax flow 210 m3/hMax head 40 m1 or 2 pumps
Sekamatik lifting stations come all ready as complete units, as they include all necessary components such as tank, pumps, piping and the controls.All you need at once.
Overview of models.
Complete range overview
4
The right solution for every application.
Models
5
Secondary bathrooms /guest bathrooms
Sekamatik10E 7M
Sekamatik10E 15M
Sekamatik10E 8M
Sekamatik200
Residential sewage • •Residential sewage also from wall hung sanitary units •
Residential grey water • • • •Residential grey water, also at high temperature •Rainwater •
Complete bathroomsSekamatik
50Sekamatik
100Sekamatik
300Sekamatik400/800
• Single-family houses• Installations not requiring a backup pump
• 1 pump
• 1 pump
• 2- and multi-family buildings• Small commercial buildings
(offices, small hotels, restaurants, etc.)
• 2 pumps
• 2 pumps
• Commercial buildings (offices, hotels, restaurants etc.) •
• Multi-family buildings• Large commercial buildings
(shopping malls etc.)•
Sekamatik10
Sekamatik200
Sekamatik50
Sekamatik100
Sekamatik300
Sekamatik400/800
# pumps - 1 1 1 or 2 1 or 2 2 1 or 2Power (P2) [kW] 0.35 - 1.1 0.18 – 1.1 0.9 – 1.9 1.1 – 2.1 1.7 – 3.3 0.9 - 19.6Flow max [m3/h] 15 22 21 50 60 210Head max [m] 17 14 33 15 18 40Volume Total [lt.] up to 11 40 46 up to 95 up to 600 up to 800Delivery port DN25 / 2” 1 1/4“ F 2” DN 80 DN 80 DN 100Hydraulic
Open/Grinder Open Grinder Vortex VortexEnclosed single-vane or Vortex
Sekamatik 10E 7MCOMPACT WASTEWATER DISPOSAL UNIT WITH GRINDER PUMP
Motor input P1 650 W
Motor output P2 300 W
Voltage 230V-240V/1Ph 50Hz
Speed 2900 rpm
Nominal current 2,6 A
Cable H 03VV-F3x0,75
Insulation class IP 44
(complete unit)
Weight 8 kg
Discharge DN 25
(o.d. 28-34 mm)
Collection tank Composite
Pump housing Glass fibre
reinforced composite
Impeller Glass fibre
reinforced composite
Motor housing, Stainless steel 1.4301
rotor shaft Stainless steel 1.4021
Cutting system Stainless steel 1.4122
Equipment supplied.Tank with pump, with ball backflow
preventer, flexible connection piece
and terminal clamp, 1,4 m of cable with
plug, non-return valves.
Technical Data.Materials.
6
Overview. The Sekamatik 10E 7M is a compact lifting station for removal of wastewater from WCs, showers, hand basins, urinals and bidets in basements, apartments or cellars which are below the sewer backflow level. The Sekamatik 10E 7M is also suitable for installation of sanitary facilities according to DIN EN 12050-3. It has a built-in pump with powerful stainless steel grinder system for solids. The DN 25 discharge pipe can be easily installed with minimum construction work. The WC inlet allows installation directly behind the WC, where minimal space is available. The tank design with separate dry area allows easy access if servicing is required.DIN EN 12050-3: Conformity and design approved and controlled by LGA. Pumped liquid: Domestic sewage and grey water.Operation: Intermittent.
Specifications.Compact wastewater disposal unit comprising:Collection Tank: Odour-tight plastic collection tank with separate dry area.Maximum utility volume 11 liters. WC-inlet DN 100 horizontal, inlet height 180 mm (DIN 1387 Form A / DIN 1388 Form A). Two inlets DN 40 with integrated non-return valve and sealing ring, discharge DN 25 with integrated ball backflow preventer. Air vent with activated carbon filter.Pump: Single-stage centrifugal stainless steel pump with horizontal discharge. Open multi-channel impeller with stainless steel cutting system.Motor: Single-phase electric motor with thermal sensors embedded in the winding. Insulation Class B. Stainless steel rotor shaft, pre-lubricated bearings.Shaft Seals: Triple lip-seals.Control: Pneumatic level control with control electronics. Seal monitoring, alarm signal and runtime monitoring.
H(m)
0
1
2
3
4
5
6
7
8
9
(l/s)0 0,2
(m3/h)
Q
40 1 2 3 5 6 7
10
8
0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4
0.0/
1015
() 0
01 g
ra /
Nr.
0034
023
GB
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected] www.homapumps.com
We reserve the right to alter our specifications without notice!
a Tank cover (screwed)b Air vent with activated carbon filterc Screw for inlet DN40 (Ø40)d Connection for discharge Da 28-34
with integrated ball backflow preventere Cable inletf Connection for WC inlet, DIN1387, Form A
Connection for WC inlet, DIN1388, Form A
173202
488
298
488
108
4036
180
173
196
237
285
40 36
173
196
237
2
3 3
1
4
5
6
Installation
Part Description Dimension PartNo.
Bronze gate valve BSP 1" F 2216010
BSP 11/4" F 2216012
BSP 11/2" F 2216015
90° galvanized BSP 1" F/M 2111305
elbow BSP 11/4" F/M 2111405
BSP 11/2" F/M 2111505
Galvanized BSP 1" M/F 2114303
union piece BSP 11/4" M/F 2114304
BSP 11/2" M/F 2114305
Alarm device AL3 with water level collecting tank
1586146
Accessories Dimensions (all dimensions in mm)
Rückstauebene
1:501:50
> – 10
0
0.0/
1015
() 0
01 g
ra /
Nr.
0034
023
GB
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected] www.homapumps.com
We reserve the right to alter our specifications without notice!
a Tank cover (screwed)b Air vent with activated carbon filterc Screw for inlet DN40 (Ø40)d Connection for discharge Da 28-34
with integrated ball backflow preventere Cable inletf Connection for WC inlet, DIN1387, Form A
Connection for WC inlet, DIN1388, Form A
173202
488
298
488
108
4036
180
173
196
237
285
40 36
173
196
237
2
3 3
1
4
5
6
Installation
Part Description Dimension PartNo.
Bronze gate valve BSP 1" F 2216010
BSP 11/4" F 2216012
BSP 11/2" F 2216015
90° galvanized BSP 1" F/M 2111305
elbow BSP 11/4" F/M 2111405
BSP 11/2" F/M 2111505
Galvanized BSP 1" M/F 2114303
union piece BSP 11/4" M/F 2114304
BSP 11/2" M/F 2114305
Alarm device AL3 with water level collecting tank
1586146
Accessories Dimensions (all dimensions in mm)
Rückstauebene
1:501:50
> – 10
0
Performance. Installation.
Dimensions.(all dimensions are in mm.)
7
1. Tank cover (screwed)2. Air vent with activated carbon filter3. Connection for inlet DN 40 (Ø 40)4. Connection for DN 25 discharge pipe with integrated ball backflow preventer5. Cable inlet6. Connection for WC inlet, DIN1387, Form A DIN1388, Form A
Sekamatik 10E 15MCOMPACT SEWAGE DISPOSAL UNIT WITH GRINDER SYSTEM
Motor input P1 1,5 kW
Motor output P2 1,1 kW
Voltage 230 V/1 Ph, 50 Hz
Speed 2900 rpm
Nominal current 7,0 A
Cable H 07RN–F 4G1,5
Weight 32 kg
Discharge BSP 2“ M
Collection tank Composite
Pump housing, Cast iron
motor housing, impeller GG 25/EN-GJL-250
Cutting system Stainless steel
1.4528
Rotor shaft, screws Stainless steel
Seal kit NBR
Equipment supplied.Tank with pump, pneumatic electronic
control box, 2 m of cable and plug.
Technical Data.Materials.
8
Overview. The Sekamatik 10E 15M disposal unit is designed to remove wastewater from WCs, hand basins, washing machines and showers in basements, apartments or cellars which are below the sewer backflow level and require the installation of a lifting station. It has the advantage of a ground level direct WC connection, enabling the Sekamatik 10E 15M to be installed directly on to the back of the toilet. It incorporates a reliable stainless steel grinder system for solids.The diameter for the discharge pipe should be 1¼“ minimum, which can be easily laid at low cost with a minimum construction work.DIN EN 12050-1: Conformity and design approved and controlled by LGA.Pumped liquid: Drainage water, wastewater or sewage. Max. liquid temperature: 35°C, short term up to 60°C.Operation: Intermittent.
Specifications.Compact sewage disposal unit consisting of: Collecting tank: Odour and gas-tight composite collection tank. Max. utility volume 11 liters. WC-inlet: DN 100horizontal, inlet height 180 mm. Vertical inlet DN 50 on the top of the tank. Air vent DN 25 vertical. Cleaning cover with screw cap.Pump: Single stage centrifugal pump with horizontal discharge. Open multi-channel impeller with cutting system.Discharge: BSP 2“ M.Motor: Single phase electric motor with thermal sensors embedded in the winding. Insulation class H. Degree ofprotection IP 68.Shaft/Bearing: Large diameter steel rotor shaft, pre-lubricated bearings.Seals: Combination of mechanical seals (silicon carbide / silicon carbide) and lip seal with oil chamber.Controls: Pneumatic level control with pressure switch. Electronic control box.Overload protection. Temperature control of the winding with automatic motor restart.
)
0 1 2 3 4 5 (l/s) 6
0 4 8 12 16 (m3/h) 20Q
0
4
8
12
16
H (m)
20
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected] 3.
0/01
11 (S
T) 0
01 je
s / N
r. 00
3403
0EN
We reserve the right to alter our specifications without notice!
Installations
Part Description Dimension Part No.
Gasket for WC-direct connection dia. 134/87 2725134
90° galvanized elbow BSP 2“ F x BSP 1 1/2“ F 2112605 BSP 2“ F 2113606
Bronze non-return valve BSP 1 1/2“ F 2211313
Bronze gate valve BSP 1 1/2“ F 2216015 BSP 2“ F 2216020
Galvanized union BSP 1 1/2“ M/F 2214305 piece BSP 2“ M/F 2214310
Ball swing check valve BSP 2“ F 2212903
AL3 alarm control panel with water level sensor for the collecting tank 1586143
Accessories Dimensions
all dimensions in mm
Sewer back-flush level
250
395
Ø 1
09
Ø 1
28
335
112
388
180
584
290
330
Ø 40
500
40
250
4030
30
BSP 2" M
125
35
7
WC-direct connectionConnection for discharge pipe BSP 2'' M
65
Cable inlet4Cleaning cover
32
Inlet for plastic pipe DN1001
Connection for pneumatic level control
Tank fixing point
Pump coverAir vent cap with PVC tube8
910 Knurled screws11
7 8 9 11
5
6
21 3 4
10
Inlet DN50
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected] 3.
0/01
11 (S
T) 0
01 je
s / N
r. 00
3403
0EN
We reserve the right to alter our specifications without notice!
Installations
Part Description Dimension Part No.
Gasket for WC-direct connection dia. 134/87 2725134
90° galvanized elbow BSP 2“ F x BSP 1 1/2“ F 2112605 BSP 2“ F 2113606
Bronze non-return valve BSP 1 1/2“ F 2211313
Bronze gate valve BSP 1 1/2“ F 2216015 BSP 2“ F 2216020
Galvanized union BSP 1 1/2“ M/F 2214305 piece BSP 2“ M/F 2214310
Ball swing check valve BSP 2“ F 2212903
AL3 alarm control panel with water level sensor for the collecting tank 1586143
Accessories Dimensions
all dimensions in mm
Sewer back-flush level
250
395
Ø 1
09
Ø 1
28
335
112
388
180
584
290
330
Ø 40
500
40
250
4030
30
BSP 2" M
125
35
7
WC-direct connectionConnection for discharge pipe BSP 2'' M
65
Cable inlet4Cleaning cover
32
Inlet for plastic pipe DN1001
Connection for pneumatic level control
Tank fixing point
Pump coverAir vent cap with PVC tube8
910 Knurled screws11
7 8 9 11
5
6
21 3 4
10
Inlet DN50
Sewer backflow level
Performance. Installation.
Dimensions.(all dimensions are in mm.)
9
1. Inlet DN 1002. WC-direct connection3. Connection for discharge pipe
BSP 2’’ M4. Cable inlet5. Cleaning cover6. Connection for pneumatic
level control7. Inlet DN508. Air vent cap with PVC tube9. Pump cover10. Knurled screws11. Tank fixing point
Sekamatik 10E 8M COMPACT DRAINAGE WATER AND EFFLUENT DISPOSAL UNITWITH STAINLESS STEEL SUBMERSIBLE PUMP
Motor input P1 650 W
Motor output P2 350W
Voltage 230V-240V/1Ph 50Hz
Speed 2900 rpm
Nominal current 2,6 A
Cable H 03VV-F3x0,75
Insulation Class IP 44
(complete appliance)
Weight 8 kg
Discharge DN 25
(o.d. 28-34 mm)
Collection tank Composite
Pump housing Glass fibre reinforced
composite
Impeller Glass fibre reinforced
composite
Motor housing, Stainless steel
1.4301
Rotor shaft 1.4021
Equipment supplied.Tank with pump, with ball backflow
preventer, flexible connection piece
and terminal clamp, 1,4 m of cable with
plug, non-return valves.
Technical Data.Materials.
10
Overview. The Sekamatik 10E 8M compact mini pump station is designed to remove wastewater from hand basins, washing machines, urinals, bidets, showers, bathtubs and dishwashers in basements, apartments or cellars which are below the sewer backflow level. The Sekamatik 10E 8M is also suitable for installation of sanitary facilities according to DIN EN 12050-3. The built-in stainless steel drainage pump operates automatically by a float switch control.The DN 25 discharge can be easily installed with minimum construction work. The Sekamatik 10E 8M compact design allows installation directly under the hand basin, where space is at a premium.The new tank design with separate dry area allows easy access if servicing is required.DIN EN 12050-3: Conformity and design approved and controlled by LGA.Pumped liquid: Domestic drainage water and effluent.Operation: Intermittent.
Specifications.Compact domestic effluent disposal unit comprising:Collection Tank: Odour-tight plastic collection tank with separate dry area. Maximum utility volume 11 liters. One top inlet DN 40. Two lateral inlets DN 40 with integrated non-return valve and sealing ring. DN 25 discharge diameter with integrated ball backflow preventer. Air vent with activated carbon filter.Pump: Single-stage centrifugal stainless steel pump with horizontal discharge.Motor: Single-phase electric motor with thermal sensors embedded in the winding. Insulation Class B. Stainless steel rotor shaft, pre-lubricated bearings.Shaft Seals: Triple lip-seals.Controls: Pneumatic level control with control electronics. Seal monitoring, alarm signal and runtime monitoring.
H(m)
0
1
2
3
4
5
6
7
8
9
(l/s)0 0,2
(m3/h)
Q
40 1 2 3 5 6 7
10
8
0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4
0.0/
1015
() 0
01 g
ra /
Nr.
0034
002G
B
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected] www.homapumps.com
We reserve the right to alter our specifications without notice!
Accessories
Part Description Dimension PartNo.
Bronze gate valve BSP 1" F 2216010 BSP 11/4" F 2216012 BSP 11/2" F 2216015
90° galvanized BSP 1" F/M 2111305elbow BSP 11/4" F/M 2111405 BSP 11/2" F/M 2111505
Galvanized BSP 1" M/F 2114303union piece BSP 11/4" M/F 2114304 BSP 11/2" M/F 2114305
Alarm device AL3 with water level collecting tank 1586146
a Tank cover (screwed) b Air vent with activated carbon filterc Screw for inlet DN40 (Ø40)d Connection for discharge Da 28-34
with integrated ball backflow preventere Cable inletf Connection for hand basin DN40 (Ø40)
173
84
488
36 202 173
298
3640
108
285
293
40
173
488
1
2
3
3
4
5
6
Dimensions (all dimensions in mm)
Installations
Rückstauebene
1:50
135
> _
Rückstauebene
135
> _
1:50
Rückstauebene1:50
> – 10
00.
0/10
15 ()
001
gra
/ N
r. 00
3400
2GB
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected] www.homapumps.com
We reserve the right to alter our specifications without notice!
Accessories
Part Description Dimension PartNo.
Bronze gate valve BSP 1" F 2216010 BSP 11/4" F 2216012 BSP 11/2" F 2216015
90° galvanized BSP 1" F/M 2111305elbow BSP 11/4" F/M 2111405 BSP 11/2" F/M 2111505
Galvanized BSP 1" M/F 2114303union piece BSP 11/4" M/F 2114304 BSP 11/2" M/F 2114305
Alarm device AL3 with water level collecting tank 1586146
a Tank cover (screwed) b Air vent with activated carbon filterc Screw for inlet DN40 (Ø40)d Connection for discharge Da 28-34
with integrated ball backflow preventere Cable inletf Connection for hand basin DN40 (Ø40)
173
84
488
36 202 173
298
3640
108
285
293
40
173
488
1
2
3
3
4
5
6
Dimensions (all dimensions in mm)
Installations
Rückstauebene
1:50
135
> _
Rückstauebene
135
> _
1:50
Rückstauebene1:50
> – 10
0
0.0/
1015
() 0
01 g
ra /
Nr.
0034
002G
B
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected] www.homapumps.com
We reserve the right to alter our specifications without notice!
Accessories
Part Description Dimension PartNo.
Bronze gate valve BSP 1" F 2216010 BSP 11/4" F 2216012 BSP 11/2" F 2216015
90° galvanized BSP 1" F/M 2111305elbow BSP 11/4" F/M 2111405 BSP 11/2" F/M 2111505
Galvanized BSP 1" M/F 2114303union piece BSP 11/4" M/F 2114304 BSP 11/2" M/F 2114305
Alarm device AL3 with water level collecting tank 1586146
a Tank cover (screwed) b Air vent with activated carbon filterc Screw for inlet DN40 (Ø40)d Connection for discharge Da 28-34
with integrated ball backflow preventere Cable inletf Connection for hand basin DN40 (Ø40)
173
84
488
36 202 173
298
3640
108
285
293
40
173
488
1
2
3
3
4
5
6
Dimensions (all dimensions in mm)
Installations
Rückstauebene
1:50
135
> _
Rückstauebene
135
> _
1:50
Rückstauebene1:50
> – 10
0
Sewer backflow level
Performance. Installation.
Dimensions.(all dimensions are in mm.)
11
1. Tank cover 2. Air vent with activated carbon
filter3. Connection for inlet DN 40
(Ø40)4. Connection for DN 25 discharge
pipe with integrated ball backflow preventer
5. Cable inlet6. Connection for hand basin
DN 40 (Ø40)
Sekamatik 200DOMESTIC WASTEWATER DISPOSAL UNIT WITH UNDER-FLOOR COLLECTING TANK
Motor Motor Nominal Discharge Weight input output current (kg) P1 (kW) P2 (kW) (A)200 E UF 10M K3 1,00 0,76 4,5 BSP 11/4“ 8,0
200 E UF 12M K4 1,20 0,91 5,0 BSP 11/4“ 8,3
200 E UF 12M K7 1,20 0,80 5,0 BSP 11/4“ 9,0
200 E UF 15M K8 1,50 1,10 6,9 BSP 11/4“ 11,0
Collecting tank Polyethylene
Installation kit PVC
Pump housing Composite
(200 E UF 12M K4)
Stainless steel
(200 E UF 12M K7 –
200 E UF 15M K8)
Motor housing Stainless steel
Impeller Composite
(200 E UF 12M K4)
Stainless steel
(200 E UF 12M K7 –
200 E UF 15M K8)
Rotor shaft, screws Stainless steel
Seal kit NBR
Technical Data.Materials.Curve Pump type No.
12
Overview. The Sekamatik 200 disposal unit removes wastewater from hand basins, washing machines, showers or baths, and de-waters cellars, basements and garages.DIN EN 12050-3: Conformity and design approved and controlled by LGA.Installation: Collecting tank for under-floor installation with adjustable access cover.Pumped liquid: Clear water and drainage water. Max. liquid temperature: 35°C, short term up to 60°C.
Specifications.Wastewater disposal for under-floor installation consisting of:Collecting tank: Plastic tank fixed to prevent lifting, 40 liters volume, with 3 inlets DN 100. Connecting piece DN 70 for air vent and cable duct. Frame with adjustable height to adapt the cover plate to the floor level. Odour tight cover plate with floor drain. The cover plate can be used as a gutter or a tile frame. Both frame and plate are adjustable in height and capable of being turned through 360° for adjustment to the floor level and direction of tiles after the tiles have been laid.Installation kit: Discharge connector and pipe for the pump are fitted in the tank, including a non-return valve in the pipework (only for the pump models without an integrated non return-valve).Pump/Motor: Single stage centrifugal submersible drainage pumps with float switch control for automaticoperation depending on liquid level in the tank. Model 200 E UF 12M K4 with integrated non-return valve. Fully submersible, pressure-tight electric motor, jacket cooled. Insulation class F. Degree of protection IP 68.
0
00
2
4
6
8
10
14
12
16H (m)
1 2 3 4 5 6 7 8
4 8 12 16 20 24 28 (m3/h)
(l/s)Q
3
2
1
4
3.0/
0411
(ST)
001
jes
/ Nr.
0034
011
EN
We reserve the right to alter our specifications without notice!
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected]
Installation Part Description Part No.
Saniquick UF composite collecting tank with frame and cover plate 9804010Installation kit for pump types: C 225, C 235 and CR 252 9804028C 280 and C 290 9804032CR 360 9804034 H 501 – H 508 9804035 H 106, H 117, H 307 - H 328, TP 28 9804024Extension kit for collecting tank 73351731 HOMA 2 Poles earth leakage circuit breakerFi 16/0,03 A 1561160Alarm device AL 3 Mains-operated with connector for battery 9 V (see below) for mains independant operation with integrated buzzer. Mains connection 230-240 V / 1 Ph 1586142rechargable battery, 9 V 1952215
Equipment supplied /Accessories
Pump type P1 (kW) Part No.C 225 WA 0,25 9110260C 235 WA 0,35 9110265C 280 WA 1,0 9110288C 290 WBA 1,2 9110290C 290 DA 1,1 9110292CR 252 WA 0,53 9110211CR 360 VWA 0,63 9251112H 501 WA 1,2 9251116H 502 WA 1,2 9251110H 502 DA 1,0 9251130
Pump type P1 (kW) Part No.H 505 WA 1,5 9251151H 506 WA 1,5 9251145H 506 DA 1,3 9251165H 508 WA 2,2 9251175H 508 DA 1,9 9251190TP 28 V WA 1,1 9211311TP 28 V 11/2 WA 1,1 9211283TP 28 V 11/2 DA 1,1 9211293TP 28 M 10/2 WA 1,0 9211281TP 28 M 10/2 DA 1,0 9211291
Sewer backflush level
Pump
Discharge pipe
Installation kit
Air vent
and cable pipe
Inlet DN100
Inlet DN100
BSP 11/4" M
Inlet DN100
cable ductDN70 Air vent and
discharge connection
602
583
40 40
BSP 11/4" M
min
. 58
Adjustable frame
Extension Kit
min
. 827
min
. 738
Access cover withfloor drain
DN70 Air vent andcable duct
discharge connection
Inlet DN100BSP 2" M
max
. 109
3
max
. 316
310
max
. 130
87 5256
031
0
ø500
11
max
. 446
min
. 58
ø 400
BSP 11/4" M
BSP 11/4" M
Inlet DN100
Inlet DN100
Inlet DN100
min
. 636
Access cover withfloor drain
DN70 Air vent andcable duct
discharge connection
Adjustable frame
cable ductDN70 Air vent and
discharge connection
Inlet DN100BSP 2" M
602
87 52
max
. 766
560
310
max
. 119
ø500
310
583
40 40m
in. 5
8
11
ø 400
Inlet DN100
Inlet DN100
BSP 11/4" M
Inlet DN100
cable ductDN70 Air vent and
discharge connection
602
583
40 40
BSP 11/4" M
min
. 58
Adjustable frame
Extension Kit
min
. 827
min
. 738
Access cover withfloor drain
DN70 Air vent andcable duct
discharge connection
Inlet DN100BSP 2" M
max
. 109
3
max
. 316
310
max
. 130
87 5256
031
0
ø500
11
max
. 446
min
. 58
ø 400
BSP 11/4" M
BSP 11/4" M
Inlet DN100
Inlet DN100
Inlet DN100
min
. 636
Access cover withfloor drain
DN70 Air vent andcable duct
discharge connection
Adjustable frame
cable ductDN70 Air vent and
discharge connection
Inlet DN100BSP 2" M
602
87 52
max
. 766
560
310
max
. 119
ø500
310
583
40 40m
in. 5
8
11
ø 400
305
305
BS
P 2
" F
BS
P 2
" F
305
305
BS
P2"
FB
SP
2" F
Dimensions
Collecting tank Collecting tank with extension kit C225 – C 290, CR 252, CR 360, H 501 - H 508 with installation kit
H 106, H 117, H 307 - H 328, TP 28 with installation kit
Inlet DN100
Inlet DN100
BSP 11/4" M
Inlet DN100
cable ductDN70 Air vent and
discharge connection
602
583
40 40
BSP 11/4" M
min
. 58
Adjustable frame
Extension Kit
min
. 827
min
. 738
Access cover withfloor drain
DN70 Air vent andcable duct
discharge connection
Inlet DN100BSP 2" M
max
. 109
3
max
. 316
310
max
. 130
87 5256
031
0
ø500
11
max
. 446
min
. 58
ø 400
BSP 11/4" M
BSP 11/4" M
Inlet DN100
Inlet DN100
Inlet DN100
min
. 636
Access cover withfloor drain
DN70 Air vent andcable duct
discharge connection
Adjustable frame
cable ductDN70 Air vent and
discharge connection
Inlet DN100BSP 2" M
602
87 52
max
. 766
560
310
max
. 119
ø500
310
583
40 40m
in. 5
8
11
ø 400
305
BS
P 2
" F
BS
P 2
" F
Collecting tank Collecting tank with extension kit C235 – C 290 H 502 - H 506 with installation kit
Sewer backflow level
Performance. Installation.
Dimensions.(all dimensions are in mm.)
13
Sekamatik 50E (single pump)
Sekamatik 50D (twin pump)
COMPACT SEWAGE DISPOSAL UNIT WITH SUBMERSIBLE WASTEWATER PUMPS WITH GRINDER SYSTEM
14
Overview. The Sekamatik 50E and Sekamatik 50D are versatile compact sewage disposal units suitable for removing dirty water and effluent where gravity drainage is not possible. They are used for pumping sewage and wastewater from toilets, hand basins, showers and rooms which are below the sewer level (see DIN EN 12056), or wheresmall discharge pipes are necessary such as under difficult topographic conditions or areas of low population.
With the advantage of using discharge pipes of either DN 40 or DN 50 diameters, reduced construction work and cost is possible compared to conventional discharge pipes. They are available as a single pump station (Sekamatik 50E) or as a twin pump station (Sekamatik 50D).DIN EN 12050-3: Conformity and design approved and controlled by LGA.Pumped liquid: Wastewater or sewage containing soft solids. Max. liquid temperature: 35°C short term up to 60°C.Operation: Intermittent.
Specifications.Flood protected single or twin pump lifting station consisting of:Collecting tank: Odour and gas-tight plastic collecting tank.Inlets: • Horizontal: DN 100/DN 50 (180 mm or 250 mm height).• Vertical: DN 100/DN 50.Air vent union: DN 70 vertical. Connection for diaphragm pump: BSP 1“ F. Cleaning cover with screw cap.Pump: Single stage centrifugal pump with horizontal discharge. Open multi-channel impeller with grinder system.Sekamatik 50D with 2 pumps. Discharge: BSP 2“ M.Motor: Fully submersible, pressure-tight electric motor, 1 phase or 3 phase. Thermal sensors embedded in the winding. Insulation class F. Degree of protection IP 68.Shaft/Bearings: Large diameter stainless steel rotor shaft, pre-lubricated bearings.Seals: Models 15M and 13T with combination of mechanical seal (silicon carbide) and lip seal with oil chamber. Model 25T with 2 mechanical seals (silicon-carbide) with oil chamber. Oil inspection from outside.
SEKAMATIK 50 E
SEKAMATIK 50 D
Collecting tank Composite
Pump housing, impeller, Cast iron
motor housing GG25/EN-GJL-250
Grinder system Stainless steel 1.4528
Rotor shaft, screws Stainless steel
Seal kit NBR
Materials.36
32
28
24
20
16
12
8
4
0
H (m)
0 1 2 3 4 5 6 (l/s )
0 2 4 6 8 10 12 14 16 18 20 22 24
Q(m3/h)
15M + 13T
25T
Performance.
15
Tank with 1 pump (Sekamatik 50E) or 2
pumps (Sekamatik 50D). Discharge with
90° elbow BSP 2“ M. Elastic union piece for
inlet DN 100 and air vent DN 70 with bands.
Pneumatic level control.
Electronic control box with cable and plug.
Equipment supplied.
Type Motor Motor Voltage Speed Nominal Weight input output 50 Hz (rpm) current (kg) P1 (kW) P2 (kW) (V) (A)Sekamatik 50E50 E 15M H1* 1,5 1,1 230-240/1Ph 2900 7,5 37
50 E 15M H2*
50 E 13T H1* 1,3 0,9 400-415/3Ph 2900 2,5 37
50 E 13T H2*
50 E 25T H1* 2,5 1,9 400-415/3Ph 2900 4,4 51
50 E 25T H2*
Sekamatik 50D
50 D 15M H1* 1,5 1,1 230-240/1Ph 2900 7,5 62
50 D 15M H2*
50 D 13T H1* 1,3 0,9 400-415/3Ph 2900 2,5 62
50 D 13T H2*
50 D 25T H1* 2,5 1,9 400-415/3Ph 2900 4,4 89
50 D 25T H2*
* Height to main horizontal inlet in mm Performance data for each pump H1 = 180 mm H2 = 250 mm
Technical Data.
Inlets: DN 100, DN 50 (2 x)
Discharge: BSP2” M
Air vent: DN 70
Connection for diaphragm pump: BSP 1“ F
Cable Type LengthUnit-control box H07RN-F7G1,5 3 m
Control box plug H07RN-F5G 1,5 0,8 m
Collecting tank Sekamatik 50E Sekamatik 50D
Inlets height 180 mm 250 mm 180 mm 250 mm
Total volume 46 liters 46 liters 46 liters 46 liters
Operating volume 31 liters 31 liters 31 liters 31 liters
Pneumatic level control with pressure control.
Electronic control box for control, monitoring
and notification of all important functions
with advice of any problems.
Motor protection with temperature control of
the winding. Optical indication of unit failure.
Alarm signal through integral buzzer.
Volt-free contact for remote signal. Control
indication for direction of rotation. Motor
overrun period which prevents sewage
build up and blockage. Easy conversion to
mains independent alarm via 9,0 V battery
installation. Additionally for twin pump
station Sekamatik 50D: Auto-change over
after each pump cycle. Operation of second
pump at high flow. In the event of failure one
pump automatically changes to the second
pump.
Controls.
16
Sewer backflush level
180
250
Horizontal inlet DN 100/DN 50
Connection for Pneumatic level control
Air vent DN 70
Vertical inlet DN 100/DN 50
Cleaning cover
Tank fixing point
Connection for diaphragm pump
all dimensions in mm
Dimensions
Saniboy G…-16 W+D Saniboy G…-26 DSanimaster G…-16 W+D Sanimaster G…-26 D
Installations
Main inlet Direct connection horizontal Euro-WC (Inlet height 180 mm)
Direct connectionFree standing WC(Inlet height 250 mm)
250
(180
)32
0
380
390 12
119
5 451
70
673
BSP 2" M
634
321
4
5
135
550
275
120
120
230
550
145
168
270
135
6 7
140
BSP 1" F
35
6
250(
180)
320
380
390
634
70
713
7
140
BSP 1" F
35
120
194
513
BSP 2" M
321
4
5
135
550
275
120
120230
550
145
208
135
270
1. Horizontal inlet DN 100/DN 50
2. Connection for Pneumatic level control
3. Air vent DN 70
4. Vertical inlet DN 100/DN 50
5. Cleaning cover
6. Tank fixing point
7. Connection for diaphragm pump
Dimensions.(all dimensions are in mm.)
Dimensions.(all dimensions are in mm.)
Sekamatik 50 E/D 15 M/13T Sekamatik 50 E/D 15 M/25T
17
Installation.
Sewer backflush level
180
250
Horizontal inlet DN 100/DN 50
Connection for Pneumatic level control
Air vent DN 70
Vertical inlet DN 100/DN 50
Cleaning cover
Tank fixing point
Connection for diaphragm pump
all dimensions in mm
Dimensions
Saniboy G…-16 W+D Saniboy G…-26 DSanimaster G…-16 W+D Sanimaster G…-26 D
Installations
Main inlet Direct connection horizontal Euro-WC (Inlet height 180 mm)
Direct connectionFree standing WC(Inlet height 250 mm)
250
(180
)32
0
380
390 12
119
5 451
70
673
BSP 2" M
634
321
4
5
135
550
275
120
120
230
550
145
168
270
135
6 7
140
BSP 1" F
35
6
250(
180)
320
380
390
634
70
713
7
140
BSP 1" F
35
120
194
513
BSP 2" M
321
4
5
135
550
275
120
120230
550
145
208
135
270
Main inlet horizontal Direct connection
Euro-WC
(Inlet height 180 mm)
Direct connection
Wall hung WC
(Inlet height 250 mm)
Sewer backflow level
Sekamatik 100E SCOMPACT SEWAGE DISPOSAL UNIT WITH INTEGRATED SWING CHECK VALVE
18
Overview. The Sekamatik 100E S is a compact sewage disposal unit suitable for pumping sewage and wastewater from toilets, hand basins, showers and rooms which are below the sewer level according to DIN 1986.Sekamatik 100E S will prevent back up and flooding where there is a natural fall but the sewer is flooded orunable to drain. Sekamatik 100E S is the ideal solution for new builds or renovation of old buildings.
Applications.Collection and pressurization of sewage and wastewater from:• basement rooms.• sanitary facilities in cellar rooms.• sanitary facilities in restaurants, hotels, cinemas, theatres, shopping malls, schools and hospitals.DIN EN 12050-3: Conformity and design approved and controlled by LGA.Pumped liquid: Clear water or drainage water, wastewater or sewage containing soft solids. Max. liquid temperature: 35°C, short term up to 60°C.Operation: Intermittent.
Construction.Flood protected single pump lifting station consisting of:Collecting tank: Odour and gas tight plastic collecting tank.Inlets:• Horizontal: DN 100, 180 mm height.• Horizontal: DN 100, 250 mm height.• Vertical: DN 100.• Horizontal and Vertical: DN 150.• Vertical: DN 40.Discharge: Flange DN 80. Flexible union piece DN 80/Ø 89. With integrated soft check valve.Air vent: DN 70 vertical. Connection for diaphragm pump: BSP 1“ F. Cleaning cover with screw cap.Pump: Pump chamber integrated in the collecting tank. Non clogging impeller, spherical clearance 40 mm.Motor: Fully submersible, pressure tight electric motor, 1Ph or 3Ph. Thermal sensors embedded in the winding. Insulation class F. Degree of protection IP 68. Stainless steel rotor shaft, pre-lubricated bearings.Cable:Pump, 3 m: Model M: H07RN-F5G1,5 Model T: H07RN-F6G1Control box plug, 0,8 m: Model M: H07RN-F3G1,5 (plug 230 V) Model T: H07RN-F5G1,5 (CEE-plug 16 A / 400 V)Seals: Triple lip seal combination in separate oil chamber. Oil inspection from outside.
0
0
0 4 8 12 16 20 24 28 32 36
1 2 3 4 5 6 7 8 9 10(l/s)
2
4
6
8
10
12
14
H (m)
(m3/h)
Q
Performance.Collecting Tank Polyethylene
Impeller Cast steel
Pump flange, Glass-fibre, reinforced
Motor housing cover synthetic material
(composite)
Pressure cover Cast iron
non-return valve
Non-return valve Composite
housing
Motor housing Stainless steel
Rotor shaft Stainless steel
Mechanical connection
parts Stainless steel
Seal kit NBR
Materials.
Curve Pump type Motor Motor Voltage Nominal WeightNo. input output (V) current Total Operation (kg) P1 (kW) P2 (kW) (A) volume volumeSekamatik 100 E S16M 1,6 1,2 230/1Ph 7,0 70 l 30 l 33,0
Sekamatik 100 E S15T 1,5 1,2 400/3Ph 2,5 70 l 30 l 33,0
Speed: 2900 rpm
Technical Data.Collection tank
19
Tank with 1 pump, discharge with DN 80 soft
check valve and flanged elastic union piece
DN 80/Ø89 with hose bands, gasket and
screws. Elastic union piece for inlet DN 100
and air vent DN 70 with hose bands. Fixing
bolts for tank fixing point. Pneumatic level
control. Electronic control box with cable.
Equipment supplied.Pneumatic level control with pressure
operation. Motor over run period which
prevents sewage build up and blockage.
Electronic control box for control and
monitoring of all important functions. Motor
protection with temperature control of the
winding. Optical failure alarm. Acoustic alarm
by buzzer. Volt free contact for remote signal.
Control indication for direction of rotation.
Controls.
180
250
Severbackflush level
Dimensions and main components
a Horizontal inlet DN100b Horizontal inlet DN100c Horizontal inlet DN150d Vertical inlet DN100/40e Vertical inlet DN150/40f Air vent DN70g Cleaning coverh Soft ball check valve DN80i Elastic union piece
(Connection for discharge)j Flanged spigot DN80/Ø89k Flanged gate valvel Tank fixing pointm Pumpn Connection for diaphragm pump BSP1‘‘o Connection for pneumatic control box
all dimensions in mm
DN80 PN10
540610
660
452
310
300
230
110
115
610
660
590
180
~31
9
~72
6
407
250
max
. 492
500
480
400
180
250
210
3511
0
135
382
240 49
0
540
590
1315
9
12
127
1
24
456
3
5
6
12
1 2
14
3
2
11
109813
290
PVC-inlet valveDN 150
PVC-inlet valveDN 100
Connectionfor tank
Connectionfor tank
176
300
227
400
1
180
240
Direct connection Free standing WC(Inlet height 250 mm)
Main inletvertical
Direct connection Euro WC(Inlet height 180 mm)
Installations
Dimensions.(all dimensions are in mm.)
20
Dimensions.
Installation.
180
250
Severbackflush level
Dimensions and main components
a Horizontal inlet DN100b Horizontal inlet DN100c Horizontal inlet DN150d Vertical inlet DN100/40e Vertical inlet DN150/40f Air vent DN70g Cleaning coverh Soft ball check valve DN80i Elastic union piece
(Connection for discharge)j Flanged spigot DN80/Ø89k Flanged gate valvel Tank fixing pointm Pumpn Connection for diaphragm pump BSP1‘‘o Connection for pneumatic control box
all dimensions in mm
DN80 PN10
540610
660
452
310
300
230
110
115
610
660
590
180
~31
9
~72
6
407
250
max
. 492
500
480
400
180
250
210
3511
0
135
382
240 49
0
540
590
1315
9
12
127
1
24
456
3
5
6
12
1 2
14
3
2
11
109813
290
PVC-inlet valveDN 150
PVC-inlet valveDN 100
Connectionfor tank
Connectionfor tank
176
300
227
400
1
180
240
Direct connection Free standing WC(Inlet height 250 mm)
Main inletvertical
Direct connection Euro WC(Inlet height 180 mm)
Installations
1. Horizontal inlet DN 100
2. Horizontal inlet DN 100
3. Horizontal inlet DN 150
4. Vertical inlet DN 100/40
5. Vertical inlet DN 150/40
6. Air vent DN 70
7. Cleaning cover
8. Soft ball check valve DN 80
9. Elastic union piece
(Connection for discharge)
10. Flanged spigot DN 80/Ø89
11. Flanged gate valve
12. Tank fixing point
13. Pump
14. Connection for diaphragm pump BSP1‘‘
15. Connection for pneumatic control box
Dimensions.(all dimensions are in mm.)
21
Main inlet vertical Direct connection Euro WC
(Inlet height 180 mm)
Direct connection Wall hung WC
(Inlet height 250 mm)
Sewer backflow level
Sekamatik 100COMPACT SEWAGE DISPOSAL UNITWITH INTEGRATED SWING CHECK VALVE.
22
Overview. The Sekamatik 100 is a compact sewage disposal unit suitable for pumping sewage and wastewater from toilets, hand basins, showers and rooms which are below the sewer level. Sekamatik 100 will prevent back up and flooding where there is a natural fall but the sewer is flooded or unable to drain. Sekamatik 100 is the ideal solution for new construction or renovation of old buildings.Sekamatik 100 is used for applications in:• basement rooms.• sanitary facilities in cellar rooms.• sanitary facilities in restaurants, hotels, cinemas, theatres, shopping malls, schools and hospitals.DIN EN 12050-1: Conformity and design approved and controlled by LGA.Pumped liquid: Clear water or drainage water, wastewater or sewage containing soft solids. Max. liquid temperature: 35°C, short term up to 60°C.Operation: Intermittent.
Construction.Flood protected single or twin pump lifting station consisting of:Collecting tank: Odour and gas tight plastic collecting tank.Inlets:• Horizontal: DN 100, 180 mm height.• Horizontal: DN 100, 250 mm height.• Vertical: DN 100.• Horizontal and Vertical: DN 150.• Vertical: DN 40.Discharge: Flange DN 80. Flexible union piece DN 80/DN 100. With integrated soft ball check valve.Air vent: DN 70 vertical. Connection for diaphragm pump: BSP 1“ F. Cleaning cover with screw cap.Pump: Pump chamber integrated in the collecting tank. Vortex impeller, spherical clearance 45 mm.Motor: Fully submersible, pressure-tight electric motor, 1Ph or 3Ph. Thermal sensors embedded in the winding.Insulation class F. Degree of protection IP 68. Stainless steel rotor shaft, pre lubricated bearings.Seals: Triple lip seal combination in separate oil chamber. Oil inspection from outside.
(l/s)
(m3/h)
Q
H (m)
21 31 41
45
1110
53 0452 0351 02 50
16
14
12
10
8
6
4
2
10
0 1 2 3 4 5 6 7 8 9
0 5
0
3
2
41
Performance.Collecting tank with
pump housing Polyethylene
Impeller, pump flange Cast iron
GG 25/EN-GJL-250
Rotor shaft, screws Stainless steel
Seal kit NBR
The types Sekamatik 100 D 17M to 100 D 30T are also available with 1 pump to allow a later installation of the second pump.Inlets: DN 100 (3 x), DN 150 (2 x), DN 40Discharge: Flange DN 80. EU piece DN 80/ DN100Air vent: DN 70Connection for diaphragm pump: BSP 1“ F
Cable Type LengthUnit-controlbox H07 RN-F7G 1,5 3 mControl box-plug H07 RN-F5G 1,5 0,8 m
Materials.
Technical Data.
1
1
1
2
2
2
2
Cable Type Length
Unit- control box H07 RN-F7G 1,5 3 m
Control box- plug H07 RN-F5G 1,5 0,8 m
Inlets: DN 100 (3 x), DN 150 (2 x), DN 40 Discharge: Flange DN 80EU piece DN 80/ DN100Air vent: DN 70 Connection for diaphragm pump: BSP 1“ F
The types Sanistar 210 to 230 are also available with 1 pump to allow a later installation of the second pump.
Curve Type No. of Motor Motor Voltage Speed Nominal Weight Collection tank No. Pumps input output 50 Hz (rpm) current (kg) Total Operating P1(kW) P2(kW) (V) (A) volume volume
1 1,6 1,1 230/1Ph 2900 7,0 64 70 l 30 l
1 1,5 1,1 400/3Ph 2900 2,5 64 70 l 30 l
1 1,7 1,3 230/1Ph 1450 7,1 66 70 l 30 l
1,5 1,1 400/3Ph 1450 3,1 66 70 l 30 l
1 2,3 1,7 230/1Ph 1450 10,7 73 70 l 30 l
2,3 1,7 400/3Ph 1450 4,4 73 70 l 30 l
3,0 2,1 400/3Ph 2900 5,1 73 70 l 30 l
2 1,6 1,1 230/1Ph 2900 7,0 92 95 l 45 l
1,5 1,1 400/3Ph 2900 2,5 92 95 l 45 l
2 1,7 1,3 230/1Ph 1450 7,1 96 95 l 45 l
1,5 1,1 400/3Ph 1450 3,1 96 95 l 45 l
2 2,3 1,7 230/1Ph 1450 10,7 110 95 l 45 l
2,3 1,7 400/3Ph 1450 4,4 110 95 l 45 l
3,0 2,1 400/3Ph 2900 5,1 110 95 l 45 l
oplkjhgioopasdfklzxcvbnmjjkkllm
jjkkllm
jjkkllm
100 E 16M100 E 15TA100 E 17M100 E 15T100 E 23M100 E 23T100 E 30T
100 D 16M100 D 15TA100 D 17M100 D 15T100 D 23M100 D 23T100 D 30T
Sekamatik
Sekamatik
23
Tank with 1 pump (Sekamatik 100 E) or 2
pumps (Sekamatik 100 D), discharge with
DN 80 soft ball check valve and flanged
elastic union piece DN 80/DN 100 with
hose bands. Elastic union piece for inlet DN
100 and air vent DN 70 with hose bands.
Pneumatic level control. Electronic control
box with cable.
Equipment supplied.Pneumatic level control with pressure
operation. Motor over run period
which prevents sewage build up and
blockage. Electronic control box for
control and monitoring of all important
functions. Motor protection with temperature
control of the winding. Optical failure alarm.
Acoustic alarm by buzzer. Volt free contact for
remote signal.
Control indication for direction of rotation.
Additional for twin pump station:
Auto-change over after each pump
cycle. Operation of both pumps at high
flow. In the event of failure automatic
change over to the second pump.
Controls.
Sewerbackflush level
180
250
DN80 PN10
10 10
99
2
11
max
. 515
498
250
248
180
230
6 8 7 1 5 3
405
382
242
660
610
494
290
230
300
308 45
2
110540590
110
13 1313 2
7
3
51
13
8
4
10
2
3
12
13
1
500
480
180
80
13
1
500
480
180
80
210
35
3
12
210
35
10
9 6
4
DN80 PN10
11
470
180
230
max
. 515
250
2
580
542
400
390
120
700
750
405
180
290 39
040
0 542
180
700750
Dimensions and main components
Horizontal inlet DN 100 Connection for pneumatic control box Flanged gate valve DN 80 Horizontal inlet DN 100 Air vent DN 70 Connection for diaphragm pump BSP 1“ Horizontal inlet DN 150 Cleaning cover Tank fixing point Vertical inlet DN 100/DN 40 Soft ball check valve DN 80 Vertical inlet DN 150/DN 40 Elastic union piece
Direct connectionFree standing WC(Inlet height 250 mm)
Main inletvertical
Direct connectionEuro WC(Inlet height 180 mm)
Installations
all dimensions in mm
Sanistar 105, 110, 120, 130 (single pump lifting station) Sanistar 205, 210, 220, 230 (twin pump lifting station)
Dimensions.(all dimensions are in mm.)
24
Sekamatik 100 E Sekamatik 100 D
Dimensions.
Installation.
Sewerbackflush level
180
250
DN80 PN10
10 10
99
2
11
max
. 515
498
250
248
180
230
6 8 7 1 5 3
405
382
242
660
610
494
290
230
300
308 45
2
110540590
110
13 1313 2
7
3
51
13
8
4
10
2
3
12
13
1
500
480
180
80
13
1
500
480
180
80
210
35
3
12
210
35
10
9 6
4
DN80 PN10
11
470
180
230
max
. 515
250
2
580
542
400
390
120
700
750
405
180
290 39
040
0 542
180
700750
Dimensions and main components
Horizontal inlet DN 100 Connection for pneumatic control box Flanged gate valve DN 80 Horizontal inlet DN 100 Air vent DN 70 Connection for diaphragm pump BSP 1“ Horizontal inlet DN 150 Cleaning cover Tank fixing point Vertical inlet DN 100/DN 40 Soft ball check valve DN 80 Vertical inlet DN 150/DN 40 Elastic union piece
Direct connectionFree standing WC(Inlet height 250 mm)
Main inletvertical
Direct connectionEuro WC(Inlet height 180 mm)
Installations
all dimensions in mm
Sanistar 105, 110, 120, 130 (single pump lifting station) Sanistar 205, 210, 220, 230 (twin pump lifting station)
1. Horizontal inlet DN 100
2. Horizontal inlet DN 100
3. Horizontal inlet DN 150
4. Vertical inlet DN 100/DN 40
5. Vertical inlet DN 150/DN 40
6. Connection for pneumatic control box
7. Air vent DN 70
8. Cleaning cover
9. Soft ball check valve DN 80
10. Elastic union piece
11. Flanged gate valve DN 80
12. Connection for diaphragm pump BSP 1“
13. Tank fixing point
Dimensions.(all dimensions are in mm.)
25
Main inlet vertical Direct connection
Euro WC
(Inlet height 180 mm)
Direct connection
Wall hung WC
(Inlet height 250 mm)
Sewer backflow level
Sekamatik 300COMPACT SEWAGE DISPOSAL UNITSWITH LARGE TANK CAPACITY.
Collecting tank with
pump housing Polyethylene
Impeller, pump flange Cast iron
GG 25/EN-GJL-250
Rotor shaft, screws Stainless steel
Seal kit NBR
Materials. Technical Data.
Curve Type Motor input Motor output Voltage Speed Nominal Weight No. Sekamatik 300 P1 P2 50 Hz (U/min) current (kg) (kW) (kW) (V) (A)
jjklm
300 D/TD 23M 2,3 1,7 230-240/1Ph 1450 10,7 132 / 204 300 D/TD 23T 2,3 1,7 400-415/3Ph 1450 4,4 132 / 204 300 D/TD 37T 3,7 2,9 400-415/3Ph 1450 6,5 148 / 220 300 D/TD 30T 3,0 2,1 400-415/3Ph 2900 5,1 132 / 204 300 D/TD 40T 4,0 3,3 400-415/3Ph 2900 6,6 148 / 220
26
Overview. Sekamatik 300 compact sewage disposal units are suitable for pumping sewage and wastewater from areas below the sewer backflow level (see DIN EN 12056). With their large tank capacity with extremely compact dimensions they are the ideal solution for the disposal of larger private, commercial or public buildings.The compact design with various inlets and integrated double soft ball check valve allows a packed installation withminimum space requirement.DIN EN 12050-1: Conformity and design approved and controlled by LGA.Pumped liquid: Clear water or drainage water, wastewater or sewage containing soft solids. Max. liquid temperature: 35°C, short term up to 60°C.Operation: Intermittent.
Construction.Flood protected twin pump lifting station available as:• Sekamatik 300 D: disposal unit with one 300 liters - tank and 2 pumps. Available also with only 1 pump upon request.• Sekamatik 300 TD: disposal unit with two 300 liters – tanks in tandem arrangement with 1 pump each.Inlets:• DN 150 horizontal, 300 mm height.• DN 150 vertical, 400 mm height, with 90°- moulded piece (accessory) as horizontal inlet 600 mm or higher, horizontally adjustable.• DN 100 vertical, 700 mm height.• 2 x DN 150 connection for tank in tandem arrangement.Collecting tank: Odour and gas tight composite collecting tank.Discharge: Flange DN 80. Flexible union piece DN 80 / DN 100.With integrated soft ball check valve.Air vent: DN 70 vertical. Connection for diaphragm pump BSP 1“ F.Cleaning cover with screw cap.Pump: Pump chamber integrated in the collecting tank. Vortex impeller, spherical clearance 45 mm.Motor: Fully submersible, pressure-tight electric motor, 1 phase or 3 phase. Thermal sensors embedded in the winding. Insulation class F. Degree of protection IP 68. Large diameter stainless steel rotor shaft, pre-lubricated bearings.Seals: Triple lip seal combination in separate oil chamber. Oil inspection from outside.
0 2 4 6 8 10 12 14 16 (l/s)
0 10 20 30 40 50 60(m3/h)Q
0
2
4
6
8
10
12
14
16
18H (m)
20
4
3
2
1
Performance.
Cable Type LengthUnit-Control box 2 x H07RN-F7 G1,5 3 mControl box- Model M: H07RN-F 3G1,5 0,8 mplug plug 230 V Model T: H07RN-F 5G1,5 0,8 m CEE-plug 16 A / 400 V
Electronic control box for control and
monitoring of all important functions.
Pneumatic level control with pressure
operation. Auto-change over after each
pump cycle. Operation of both pumps at
high flow. In the event of failure automatic
change over to the second pump. Motor
protection with temperature control of
the winding. Optical failure alarm. Acoustic
alarm by buzzer.
Volt free contact for remote signal.
Control indication for direction of rotation.
Controls.1. Inlet DN 150 horizontal
2. Inlet DN 150 vertical, alternatively
usable with an elbow (accessory) as 90°
horizontal inlet
3. Inlet DN 100 vertical
4. Connection for pneumatic control box
5. Air vent DN 70
6. Cleaning cover
7. Soft ball check valve DN 80
8. Elastic union piece
9. Flanged gate valve DN 80 (accessory)
10. Connection for diaphragm pump BSP 1“
11. Elastic union piece DN 150, 200 mm long
12. Uplift safety
13. Connection piece DN 100 (accessory)
14. Connection DN 150
Tandem-double-unit
15. Blind flange
Dimensions
Pipe DN100
DN80 PN10
3 5
80100
700
13
8 9 7 751
230
248
180
455
12
5 3
2
1
104030
0
400
min
. 600
850
100438158
412
160
850
215 43
8
160360
1800290
160
158
438
160
90°
15 11
3
6
1 2
5
11 11
11
3
5
4
DN50 PN10 Pipe DN100
100
80 230
min
. 600
400
300
40
180
220
45570
0
5 85
2
1
10
3
9
7
14
3
11
4
21
5
3
11 6
850
890
179160290
158
158
850
438
160
179
438
160290
90
Control box Electronic control box for control and monitoring of all important functions. Pneumatic level control with pressure operation. Auto-change over after each pump cycle. Operation of both pumps at high flow. In the event of failure automatic change over to the second pump. Motor protection with tem-perature control of the winding. Optical failure alarm. Acou-stic alarm by buzzer. Volt free contact for remote signal. Control indication for direction of rotation. Connection for ServCom controller (see accessories) for:- Monitoring of operation hours, number of starts, maintenance interval, unnor-mal operating conditions.
- Adjustment of pump operation level in the tank.
Mains independent alarm by installing a 9V battery (see accessories). Available with control box HCON on re-quest (see accessories).
Dimensions and main components
Accessories
Inlet DN 150 horizontal Inlet DN 150 vertical, alternatively usable by
KG-elbow (accessory) as 90° horizontal inlet Inlet DN 100 vertical Connection for pneumatic control box Air vent DN 70
Cleaning cover Soft ball check valve DN 80 Elastic union piece Flanged gate valve DN 80 (accessory) Connection for diaphragm pump BSP 1“ Elastic union piece DN 150, 200 mm long
Uplift safety Connection piece DN 100 (accessory) Connection DN 150
Tandem-double-unit Blind flange
Double-unit Tandem-double-unit
Part description Dimension Part-No.
1 Flanged gate valve DN 100 2216100 with gasket and DN 150 2216150 fixing bolts Flanged elastic DN 100 2159041 union piece DN 150 2159541
Hose band S 115/20 2311520 GBS 168/30 2317520 Flanged gate valve, DN 80 2216080 with gasket and fixing bolts
Part description Dimension Part-No.
Flanged elastic DN 100 Equipment union piece supplied for discharge pipe DN 80 2159021 Connection piece with DN 100 2155102 flexible union piece Diaphragm pump BSP 1“ F 8502445 Battery 9 V for mains- independent alarm 1952214 ServCom controller for monitoring of operation data and adjustment of the control levels in the tank. 1964450
all dimensions in mm
3.0/
0610
(ST)
001
jes
/ No.
003
4050
EN
HOMA Pumpenfabrik GmbHP.O. Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected] www.www.homapumps.com
We reserve the right to alter our specifications without notice
1 2
1 2
5
4
3
4
3
Dimensions.(all dimensions are in mm.)
27
Sekamatik 300 D... Sekamatik 300 TD...
Sekamatik 400 / 800COMPACT SEWAGE DISPOSAL UNIT WITH PLASTIC TANK.
28
Overview. The Sekamatik 400/800 range of compact sewage disposal units is suitable for pumping sewage and wastewater from areas below the sewer level (see DIN EN 12056). With their large tank volumes and high performance submersible wastewater pumps they are perfect for large private, commercial or public buildings, hospitals, schools etc.The compact design allows installation with minimum space available.The horizontal pump position with the straight-thru tank-pump discharge connection eliminates elbows.The tanks are available with 400 and 800 liters volume.DIN EN 12050-1: Conformity and design approved and controlled by LGA.Pumped liquid: Clear water or drainage water, wastewater or sewage containing soft solids. Max. liquid temperature: 35°C, short term up to 60°C.Operation: Intermittent.
Specifications.Flood protected single or twin pump lifting station consisting of:Collecting tank: Odour and gas tight tank.Plastic tank: Total volume 400 lt, tandem installation with two tanks 800 lt volume.Inlets: • Horizontal: DN 150 (3x).• Vertical: DN 100.Air vent DN 70. Connection for diaphragm pump DN 50. Cleaning cover with screw cap. Connections for pneumatic level control and float switch.Pumps: Single stage sewage pumps. Horizontal installation, discharge vertical.Impellers: Enclosed single-vane impeller or vortex impeller.Motors: Fully submersible, pressure tight electric motors 400-415 V / 3 Ph. Thermal sensors embedded in the winding. Insulation class H. Degree of protection IP 68. Large diameter stainless steel rotor shaft, pre-lubricated bearings.Seals: Combination of two mechanical seals (silicon-carbide) in a separate oil chamber. Oil inspection from outside.
Collecting tank Polyethylene
Motor housing, Cast iron
pump housing, EN-GJL-250
impeller
Rotor shaft, Stainless steel
screws
Seal kit NBR
Materials.20
18
16
14
12
10
8
6
4
2
00 10 20 30 40 50 60 70 80 90 100 110 120
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
H (m)
Q (m3/h)
Q(l/s)
1
2
3
4
5
DN80
0 20 40 60 80
0 4 8 12 16
100 (m3/h)Q
(l/s)
120 140 160 180 200 220 240
20 24 28 32 36 40 44 48 52 56 60 64
H (m)
Q
DN100
40
36
32
28
24
20
16
12
8
4
0
15
14
131211
1098
7
6
Performance.
Curve Pump type Motor Speed Nominal Weight no. output (rpm) current (kg) P2 (kW) (A)Discharge DN 80Spherical clearance 70 mm
TP 70 M 13/4 D 0,9 1450 2,6 40
TP 70 M 16/4 D 1,3 1450 3,4 40
TP 70 M 26/4 D 1,9 1450 5,5 66
TP 70 M 31/4 D 2,4 1450 6,3 66
TP 70 V 36/2 D 2,9 2900 6,3 56
Discharge DN 100Spherical clearance 80/100 mm
MX 2339-D44
MX 2341-D44
MX 2444-T54
MX 2446-T64
MX 2448-T64
MX 2330-T72
jklmnopqrssss
9T
13T
19T
24T
29T
26TB
26TC
29TB
37T
50TA
65TA
95TA
115TA
144T
196T
2,6
2,6
2,9
3,7
5,0
6,5
9,5
11,5
14,4
19,6
1450
1450
1450
1450
1450
1450
2900
2900
2900
2900
6,2
6,2
5,8
7,2
9,9
13,1
18,8
22,2
27,0
36,9
82
82
118
122
132
135
120
123
178
178
Technical Data.
Pump types
Tank typesType Material Total Operating volume volume
PE 408, PE 410 Polyethylene 400 l 220 l
PE 810 Polyethylene 800 l *
* 2 tanks in tandem installation
440 l
29
Tank with 1 pump or 2 pumps. Elastic
hose connections with bands for tank
inlet, connection tank-pump, air vent and
diaphragm pump. 1 Elastic union piece DN
100 per pump for discharge connection
(with flange DN 80 or DN 100 depending
on the pump type). Pneumatic level control.
Electronic control panel.
E+D: Available as single tank pump stationwith 1 pump (E) or with 2 pumps (D) TD: Available as twin tanks (tandem) pump station with two pumps
Control panel
Pneumatic level control with pressure
operation. Available with float switch control
on request. Electronic control box for control
and monitoring of all main functions.
Equipment supplied. Controls.Combinations of tanks and pumps
Tank types PE E / D / TD... PE E ... / PE D ... PE TD ...
Dimensions. (all dimensions are in mm.)
Tank types PE 40 / PE 80
PE 40 S/T
PE 80 T
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
Tank types PE 40 / PE 80
PE 40 S/T
PE 80 T
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
Tank types PE 40 / PE 80
PE 40 S/T
PE 80 T
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
Pipe11/2"ISO Pipe
DN100 PN10
InletDN150
190
227
Air ventDN70
740 (DN80-100)780 (DN100)
220 (DN80-100)260 (DN100)
448134
MN
400
AC
K850 238 190
GL
DFE (DN)
InletDN150
InletDN150
InletDN100
190
330
780
450
InletDN150
InletDN150
InletDN100
190
330
780
780
1590
285
1260
H
30
Pump types available in combination with tank types:
400 liters 800 liters
PE ... 9T E+D -
PE ... 13T E+D -
PE ... 19T E+D -
PE ... 24T E+D -
PE ... 29T E+D -
PE ... 26TB E+D TD
PE ... 26TC E+D TD
PE ... 29TB E+D TD
PE ... 37T E+D TD
PE ... 50TA E+D TD
PE ... 65TA E+D TD
PE ... 95TA E+D TD
PE ... 115TA E+D TD
PE ... 144TA E+D TD
PE ... 196TA E+D TD
Tank type With pump type A A1 B C D E F G H K L M N
408 PE E, D
9T, 13T 1771 - - 435 369 80 260 180 813 90 200 700 840
19T, 24T 1758 - - 476 440 80 260 180 884 93 200 700 840
29T 1754 - - 472 369 80 260 180 813 90 200 700 840
410 PE E, D
26TB, 26TC 1776 - - 494 400 100 300 190 894 93 200 700 840
29TB, 37T 1911 - - 629 480 100 300 190 974 100 200 700 840
50TA, 65TA 1984 - - 702 480 100 300 190 974 100 200 700 840
95TA, 115TA 1977 - - 695 400 100 300 190 894 93 200 700 840
144T, 196T 2122 - - 840 400 100 300 190 894 93 200 700 840
810 PE TD 26TB, 26TC 1776 - - 494 400 100 300 190 894 93 200 700 840
29TB, 37T 1911 - - 629 480 100 300 190 974 100 200 700 840
50TA, 65TA 1984 - - 702 480 100 300 190 974 100 200 700 840
95TA, 115TA 1977 - - 695 400 100 300 190 894 93 200 700 840
144T, 196T 2122 - - 840 400 100 300 190 894 93 200 700 840
Dimensions.
1. Collecting tank *
1a. Horizontal inlet
1b. Alternative horizontal inlet/upper tank
connection
1c. Vertical inlet
1d. Lower tank connection
1e. Cleaning cover
2. Sewage pump *
3. Elastic hose connector, inlet *
4. Flanged pipe socket
5. Flanged gate valve with gasket and
fixing bolts, tank inlet
6. Flanged socket with gasket an fixing
bolts
7. Elastic hose connector *
8. Flanged pipe socket *
9. Flanged gate valve with gasket and
fixing bolts, pump inlet
10. Flanged swing check valve with
gasket and screws, cleaning cover and
aeration fixture
11. Flanged gate valve with gasket and
fixing bolts, discharge pipe
12. Flanged elastic piece with gasket and
screws **
12a. Flanged union piece with gasket and
screws for twin pump station PE 40
ditto for twin pump station PE 80
13. Flanged discharge pipe consisting of:
– Flanged FF-piece, gasket and screws
– additional m
– 90° flanged elbow with gasket and
screws
– 180° flanged elbow with gasket and
screws
14. Elastic union piece for air vent pipe *
15. Air vent pipe
16. Elastic union piece for diaphragm pump *
17. Diaphragm pump
18. Control panel with pneumatic or float
switch level control*
18a. Power cable for pump motor
18b. Pneumatic pressure hose *
19. Submersible drainage pump
* equipment supplied
** equipment supplied depending
on pump discharge size
3.0/
0411
(ST)
001
jes
/ Nr.
0034
061
EN
We reserve the right to alter our specifications without notice!
HOMA Pumpenfabrik GmbHP.O.Box 22 63, D-53814 Neunk.-Seelscheid Tel. +49 (0) 22 47 /702-0, Fax +49 (0) 22 47 /702 -44e-mail: [email protected]
13
12
11
10
17
2
19
5
1a
6
14
15
18
18b
18a
1e
1c 12a
Niveau de retenue
9871611d1b34
Part Description Dim. Part no.
Elastic union piece for diaphragm pump BSP 11/2“ *
Diaphragm pump BSP 11/2“M 8502455
Control panel with * pneumatic or float switch level control Power cable for pump motor Pneumatic pressure hose *
Submersible drainage pump, series Chromatic, H 117, TP 28
see individual leaflet
* equipment supplied
** equipment supplied depending on pump discharge size
Accessories
Part Description Dim. Part no.
Flanged gate valve with gasket and fixing DN 80 2216080 bolts, discharge pipe DN 100 2216100
Flanged elastic piece DN80 2159021 with gasket and screws DN80/100 ** DN100 **
Flanged union piece DN80/ 80 2155080 with gasket and screws DN80/100 2155081 for twin pump station DN100/100 2155100 PE 40 DN100/150 2155150
ditto for twin pump DN100/100 2155200 station PE 80 DN100/150 2155205
Flanged discharge pipe consisting of: – Flanged FF-piece, DN 80 2152081 gasket and DN 100 2152201 screws DN 150 2152251– additional m DN 80 2150080 DN 100 2150100 DN 150 2150150– 90° flanged elbow DN 80 2153302 with gasket and DN 100 2153303 screws DN 150 2153353– 180° flanged elbow DN 80 2153401 with gasket and DN 100 2153403 screws DN 150 2153453
Elastic union piece for air vent pipe DN 70 *
Air vent pipe DN 70 on request
Part Description Dim. Part no.
Collecting tank * Horizontal inlet DN 150 Alternative horizontal DN 150 inlet/upper tank connection Vertical inlet DN 100 Lower tank DN 150 connection Cleaning cover
Sewage pump *
Elastic hose connector, inlet DN 150 *
Flanged pipe socket DN 150 2171017
Flanged gate valve with gasket and fixing DN 100 2158010 bolts, tank inlet DN 150 2216150
Flanged socket with gasket an fixing bolts DN 150 2158015
Elastic hose connector DN 100 *
Flanged pipe socket DN 100 *
Flanged gate valve with gasket and fixing DN 100 2216100 bolts, pump inlet DN 150 2216150
Flanged swing check valve with gasket and screws, cleaing cover and DN 80 2212807 aeration fixture DN 100 2212809
1
3
4
6
7
8
9
10
11
13
17
18
19
12
12a
14
15
16
2
1a1b
1c1d
1e
5
Control panelPneumatic level control series PS with pressure operation. Available with float switch control on request. Electronic control box for control and monitoring of all main functions. 1 – Plastic housing IP 54 (DOL start) IP
65 (star-delta-start) 2 – Motor protection 3 – Motor contactor resp. star-delta-
combination 4 – Motor fuses (only star-delta-star) 5 – Manual-0-automatic switch 6 – Pilot lights for operation, direction
of rotation, alarm and faults 7 – Volt free contact for remote signal 8 – Mains-operated alarm with buzzer 9 – Mains-independent alarm with
battery charger for storage battery 9,6 V
10 – Temperature control of the pump motors
11 – Power voltage 400-415 V / 3Ph12 – Control voltage 230-240 V / 1Ph13 – Twin pump station control panel
additionally with auto-change over after each pump cycle, operation of second pump at high flow, auto-matic change to stand by pump in case of pump failure.
18a
18b
Installation
Sewer backflush level
Installation.
31
MINIBOX
MODEL WEIGHT
kg
MINIBOX (with pipes) 13MINIBOX DOC3 18MINIBOX DOC7 20
minibox-en_a_td
Dimensions and weights.(all dimensions are in mm.)
32
Specifications. The station is equipped with:- DOC submersible pump, with flow rate up to 230 l/min and head up to 11 m.Passes suspended solids up to 10 mm diameter.Equipped with float switch for automatic operation.- 85 liters high density polyethylene tank.- 1 1/4” flexible pipe equipped with a check valve; left or right hand connection.- Power cord outlet.- Three types of 40 mm diameter pipe inlets.- Screens.- Basin to be filled with sand or gravel to filter solid particles.
The Minibox station can be equipped with a DOC3 (0,25 kW rating) or a DOC7 (0,55 kW rating).
Installation is quick and easy: just connect the pipes and plug it in.
Minibox can be installed on the floor or buried in a suitable structure (to withstand vehicle or foot traffic).
MIDIBOX
MODEL DIMENSIONS (mm) WEIGHT
A kg
MIDIBOX DOC 1 1/4 13MIDIBOX DOC7(T) 1 1/4 16MIDIBOX DOC7VX(T) 1 1/4 16MIDIBOX DOMO7(T) 1 1/2 20MIDIBOX DOMO7VX(T) Rp 1 1/2 20
midibox-en_b_td
RpRpRpRp
Specifications. The station is equipped with:- Polyethylene basin with a capacity of 110 liters, equipped with a threaded cover.- Cable glands for power supply cables (and floats).- Rp 1 1/4 or Rp 1 1/2 delivery pipes with fast connection and ring nut for easy disassembly of the pump.- 3 fast connections:1 x DN110 for inlet, 1 x DN50 for ventilation and1 x DN65 for cable connection.- 1 x DN50 fast connection for the manual pump.- DOC or DOMO 7 submersible pump, vortex or channel impeller type.- QDR control panel for three-phase versions.
Versions with vortex impeller suitable for:- clean water, effluent, sewage containing suspended solids and fibres but non-faecal wastewater.
Versions with single or twin channel impeller suitable for:- clean water, effluent, sewage not containing suspended fibres and faecal wastewater.
Midibox can be installed on the floor or buried in a suitable structure following instructions in the“Instructions and Operative Manual”.
Easy installation:- Installation is quick and easy: for the single-phase versions you just connect the pipes and the electrical cables; for the three-phase versions you also need to connect the control panel.- The new Midibox is provided with side handles for ease of handling.- Pre-installed delivery pump and unions.
Ecological solution:- tank made from 100% recyclable polyethylene.
Easy maintenance and repair.- Tried and tested pump technology.- Pump quick and easy to remove thanks to the ring nut located near the cover.
Dimensions and weights.(all dimensions are in mm.)
33
SINGLEBOX PLUS
34
Specifications. The standard station is equipped with:- polyethylene basin with a capacity of 270 liters, equipped with a threaded pedestrian cover (100 kg max).- Cable glands for power supply cables (and floats).- Rp 1 1/2 or Rp 2 delivery pipes with fast connection and ring nut for easy disassembly of the pump or withsliding device.- 4 fast connections:2 x DN110 for inlet, 1 x DN50 for ventilation and1 x DN65 for cable connection.- 1 x DN50 fast connection for the manual pump.- DOMO or DL submersible pump, vortex , channel impeller type or with grinder device.- QDR control panel for three-phase versions.- 3 rubber seal: 1 x DN110, 1 x DN50 and 1 x DN65 mm.
Versions with vortex impeller or with grinder device suitable for:- clean water, effluent, sewage containing suspended solids and fibres.
Versions with single or twin channel impeller suitable for:- clean water, effluent, sewage containing suspended solids but not containing fibres.
Special versions equipped with delivery pipes, ball check valve and gate valve.
Special versions equipped with sliding device and non-return ball valve.
Singlebox plus can be installed on the floor or buried in a suitable structure following instructions in the “Instructions and Operative Manual”.
Easy installation:- installation is quick and easy: for the single-phase versions you just connect the pipes and the electrical cables; for the three-phase versions you also need to connect the control panel.- The new Singlebox plus is provided with side handles for ease of handling.- Pre-installed delivery pump and unions.
Ecological solution:- tank made from 100% recyclable polyethylene.- Airtight anti-pollution tank, pursuant to European standard EN 12050.
Easy maintenance and repair.- Tried and tested pump technology.- Pump quick and easy to removethanks to the ring nut located near the cover.
TWIN-CHANNEL IMPELLER
VORTEX IMPELLER
SINGLE-CHANNEL IMPELLER
VORTEX IMPELLER
VB LSLSVB CVPCVP
SINGLEBOX PLUS 23 27 32 36
sbox-dbox-en_a_td
WEIGHT (kg)MODEL
35
Dimensions and weights.(all dimensions are in mm.)
DOUBLEBOX PLUS
36
Specifications. The standard station is equipped with:- polyethylene basin with a capacity of 550 liters, equipped with two threaded pedestrian covers (100 kg max).- Cable glands for power supply cables (and floats).- 2x Rp 1 1/2 or Rp 2 delivery pipes with fast connections and ring nuts for easy disassembly of the pumps or with sliding device.- 8 fast connections:4 x DN110 for inlet, 2 x DN50 for ventilation and2 x DN65 for cable connection.- 1 x DN50 fast connection for the manual pump.- 2x DOMO or DL submersible pumps, vortex, channel impeller type or with grinder device.- QDR2 control panel for three-phase versions.- 3 rubber seals:1 x DN110, 1 x DN50 and 1 x DN65 mm.
Versions with vortex impeller or with grinder device suitable for:- clean water, effluent, sewage containing suspended solids and fibres.
Versions with single or twin channel impeller suitable for:- clean water, effluent, sewage containing suspended solids but not containing fibres.
Special versions equipped with delivery pipes, ball check valve and gate valve.Special versions equipped with sliding device and non-return ball valve.
Doublebox plus can be installed on the floor or buried in a suitable structure following instructions in the “Instructions and Operative Manual”.
Easy installation:- installation is quick and easy:for the single-phase versions you just connect the pipes and the electrical cables; for the three-phaseversions you also need to connect the control panel.- The new Doublebox plus is provided with side handles for ease of handling.- Pre-installed delivery pump and unions.
Ecological solution:- tank made from 100% recyclable polyethylene.- Airtight anti-pollution tank, pursuant to European standard EN 12050.
Easy maintenance and repair.- Tried and tested pump technology.- Pump quick and easy to remove thanks to the ring nut located near the cover.
TWIN-CHANNEL IMPELLER
VORTEX IMPELLER
2 PUMPS RUNNING
SIMULTANEOUSLY
2 PUMPS RUNNING
SIMULTANEOUSLY
SINGLE-CHANNEL IMPELLER
VORTEX IMPELLER
2 PUMPS RUNNING
SIMULTANEOUSLY
VB LSLSVB CVPCVP
DOUBLEBOX PLUS 44 51 62 69
sbox-dbox-en_a_td
WEIGHT (kg)MODEL
37
Dimensions and weights.(all dimensions are in mm.)
MAXIBOX PLUS
38
Specifications. The standard tank is equipped with the following components, already assembled:- polyethylene basin with a capacity of 1200 or 1900 liters.- Threaded cover.- 2 1/2” or 2” delivery pipes.- 2 DN65 or DN50 sliding device systems.- 2 ball check valves.- 2 gate valves.- Float switches bracket.The supply also includes:- Cable glands for power supply cables and floats.- 1 rubber seal for DN160 inlet connection.
The standard tank doesn’t include the pumps, so it must be completed with:- 2 submersible pumps DOMO, DOMOGRI, DL. These have to be ordered separately.- Lowering devices guideclaws.
Selecting the right pump:- The pumps with Vortex or Grinder impellers are suitable for clean water, effluent and sewage handling that contain suspended solids and fiber materials.- The pumps with single or twin channel impellers are suitable for clean water, effluent and sewage handling that contain suspended solids but not fibres.Maxibox Plus must be installed buried outside the building according to the indications in the installation and operating instructions manual.
Ecological solution:- tank made of 100% recyclable polyethylene.- watertight anti-pollution tank, according to the EN 12050-1 European standard.
Easy maintenance and repair thanks to the sliding device systems.
0 10 20 30 40 50
H [m
]
0
2
4
6
8
10
12
14
160 50 100 150 200
H [f
t]
0
10
20
30
40
50
0 50 100 150
0 200 400 600 800 0405
0_A_
CH
ISO 9906 - Annex A
Q [m3/h]
Q [l/min]
Q [US gpm]
Q [Imp gpm]
MAXIBOX ∼ 2850 [rpm]DOMO - DOMO VX
DOMO 10VXDOMO 15
DOMO 20DOMO 10
DOMO 15VX
DOMO 20VX
GIRANTE BICANALE
GIRANTE VORTEX
TWIN-CHANNEL IMPELLER
VORTEX IMPELLER
0 1 2 3 4 5 6 7
H [m
]
0
5
10
15
20
25
300 5 10 15 20 25 30
H [f
t]
0
20
40
60
80
0 5 10 15 20 25
0 20 40 60 80 100 0405
1_A_
CH
ISO 9906 - Annex A
Q [m3/h]
Q [l/min]
Q [US gpm]
Q [Imp gpm]
MAXIBOX ∼ 2850 [rpm]DOMO GRI 11
DOMO GRI 11
0 5 10 15 20 25 30 35 40 45
H [m
]
0
5
10
15
20
250 20 40 60 80 100 120 140 160 180
H [f
t]
0
20
40
60
80
0 20 40 60 80 100 120 140 160
0 200 400 600 0405
2_A_
CH
ISO 9906 - Annex A
Q [m3/h]
Q [l/min]
Q [US gpm]
Q [Imp gpm]
GIRANTE MONOCANALE
GIRANTE VORTEX
MAXIBOX ∼ 2850 [rpm]DL - DLV
DLF90
MINI VORTEXDLF80 DLF VORTEX
DLV100DLF105
DLV115
DL109 DL125
SINGLE-CHANNEL IMPELLER
VORTEX IMPELLER
39
Dimensions and weights.(all dimensions are in mm.)
cod
. 191004551 - P11/18
1) The tissue in plants that brings water upward from the roots;2) a leading global water technology company.
We’re a global team unified in a common purpose: creating advanced technology solutions to the world’s water challenges. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. Our products and services move, treat, analyze, monitor and return water to the environment, in public utility, industrial, residential and commercial building services, and agricultural settings. With its October 2016 acquisition of Sensus, Xylem added smart metering, network technologies and advanced data analytics for water, gas and electric utilities to its portfolio of solutions. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise with a strong focus on developing comprehensive, sustainable solutions.
For more information on how Xylem can help you, go to www.xylem.com
Xylem |’zīl m|eXylem reserves the right to make modification without prior notice.Lowara, Flygt and Xylem are trademarks of Xylem Inc. or one of its subsidiaries. © 2018 Xylem, Inc.
For information and technical supportXylem Service Italia Srl
Via Dottor Vittorio Lombardi 1436075 - Montecchio Maggiore (VI) - ItalyTel. (+39) 0444 707111Fax (+39) 0444 491043www.lowara.comwww.xylem.com