CURRICULUM VITAE

Seifollah Nasrazadani

Engineering Technology DepartmentUniversity of North Texas

3940 N. Elm, Denton TX 76203Phone (940) 565-4052: Fax (940) 565-2666: Email: seifollah.nasrazadani@unt.edu

EDUCATION:

Ph.D., Engineering Science, 1990Louisiana State University, Baton Rouge LADissertation: Formation and Transformation of Magnetite (Fe3O4) under Different Laboratory and Field ConditionsM.S., Mechanical Engineering, 1984Louisiana State University, Baton Rouge LAThesis: Laboratory Studies Pertaining to Atmospheric Corrosion of High Strength Low Alloy SteelsB.S., Mechanical Engineering, 1982Louisiana State University, Baton Rouge LA

PROFESSIONAL EXPERIENCE:

Beginning Date- Position Organization LocationEnding Date

9/12- Present Professor/ Department of Engineering Technology Denton, TX Associate Chair

8/01- 8/12 Associate Professor Department of Engineering Technology Denton, TXUniversity of North Texas

12/00-8/01 Research Scientist Materials Science & Engineering Department Denton, TX University of North Texas

03/98-11/00 Associate professor Materials Engineering Department Isfahan, Iran(Tenured) Isfahan University of Technology (IUT)

9/94-2/98 Assistant Professor Materials Engineering Isfahan, Iran(Tenured) Isfahan University of Technology

8/90-8/94 Assistant Professor Mechanical Engineering Fayetteville, ARUniversity of Arkansas

1

AREAS OF EXPERTISE:Corrosion Science and Engineering (Aqueous Corrosion and Oxidation) Materials Science and Engineering (materials characterization, thin film deposition and characterization) Failure Analysis and Electron Microscopy

PROFESSIONAL ACTIVITIES:MEMBERSHIP IN PROFESSIONAL ORGANIZATIONS:National Association of Corrosion Engineers (NACE- 30+ year member) (Faculty advisor for UNT chapter of NACE since 2013)American Society for Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) (Faculty advisor for UNT chapter of ASHRAE since 2002-present)

OFFICES AND COMMITTEE ASSIGNMENTS IN PROFESSIONAL ORGANIZATIONS:

Officer: Participated and served as a facilitator in 2015 Engineering Technology Leadership

Institute (ETLI) in Washington DC. (Future of Engineering Technology in the United States).

Vice-Chair for TEG145 (Vapor Phase Transported and Surface Coating/RustPreventatives) of National Association of Corrosion Engineers-International (NACE-International) (2013)

Symposium Vice-chair of TEG 093X on Volatile Corrosion Inhibitors (VCI): Advances and Novel Applications, CORROSION 2013, Orlando, Florida.

Symposium Chair of TEG 093X on Volatile Corrosion Inhibitors (VCI): Advances and Novel Applications, CORROSION 2012, Salt Lake City Utah.

Chairman Dallas-Fort Worth Section of National Association of Corrosion Engineers (2010-2011)

Chair scholarship committee of DFW chapter of NACE 2012 – present. Student Poster Session Chair for Central Area Conference of NACE, August 2011. Symposium Chair of TEG 093X on Volatile Corrosion Inhibitors (VCI): Advances and

Novel Applications, CORROSION 2008, New Orleans LA. Chairman of NACE Technology Exchange Group 093X (Vapor Phase Corrosion

Inhibitors) 2007-2008. Symposium Chair of TEG 093X on Volatile Corrosion Inhibitors (VCI) and TEG 145X

on Vapor Corrosion Inhibitors and Rust Preventives for interim (Temporary) Corrosion Protection: Advances and Novel Applications, CORROSION 2006, San Diego CA.

Secretary, T-3R committee of NACE on “Atmospheric Corrosion” (1992-1994), President of student chapter of NACE at Mechanical Engineering Department of

Louisiana State University during (1988-1990). Treasurer of Iranian Society of Surface Science & Technology, Isfahan, Iran, (1998-

2000). Founder and faculty advisor for UNT chapter of ASHRAE 2001-present. Founder and faculty advisor for UNT student chapter of NACE 2014-present.

2

Faculty advisor for UNT chapter of ASME 2001-2010. Faculty advisor for UNT Tau Alpha Pi 2011- present.

Reviewer: Reviewer for Talenta (Elsevier Journal)(2017) Reviewer for Corrosion Science Journal (2014) Reviewer for international Journal of Corrosion (2015) Reviewer for CORROSION 2015 Conference (NACE) (2014) Reviewer for Journal of Materials in Civil Engineering (2013-present) Reviewer for Materials Journal (2013) Reviewer for Corrosion Science Journal (2013) Reviewer for National Association of Corrosion Engineers (NACE) annual conference

Orlando Florida (2012) Reviewer for Elsevier, International Conference on Metallurgical Coatings and Thin

Films (2012) Reviewer, Corrosion Journal published by NACE –International (2011) Reviewer for Elsevier Journal of Vibration Spectroscopy (2011) Reviewer for Springer Journal of Experimental Mechanics (2011) Applied Science and Technology- United Kingdom (2010) Reviewer Corrosion Journal published by NACE –International (2010) Reviewer for Elsevier Journal of Materials Engineering (2010) Elsevier Journal of Alloy and Compounds, MS. Ref. No. JALCOM-D-09-00044

(February 2009) IEEE Transactions on Electronic Packaging Manufacturing. ASME International Mechanical Engineering Congress & Exposition (IMECE 2008)

Papers 67692, 68293, and 66063 (July 2008). Materials Chemistry and Physics-Elsevier (MS. Ref. No. MATHCHEMPHYS-D-08-

00933, July 2008, MS MATCHEMPHYS_D-08-01444 August 18, 2008). American Chemical Society – Industrial &Engineering Chemistry Research Journal

(2008). International Journal of Engineering Education. ASME International Mechanical Engineering Congress, November 5-11, 2005 Orlando

FL. USA. Division of Experimental and Laboratory Oriented Studies (DELOS) of ASEE Annual

2004 Conference. Engineering Technology Division of ASEE Annual Conference, Montreal, Canada,

June 16-19, 2002. Reviewer of Mechanical Engineering session of ASEE in 2007.

Moderator:Session 1695: international division of ASEE 2005 Annual Conference, Portland Oregon. Reviewed 8 papers.

3

ADDITIONAL RESPONSIBILITIES AND OTHER ACTIVITIES:

Leadership: Associate Chair, Engineering Technology Department 2012-present. Chair Graduate Program Committee (GPC), Engineering Technology Department 2012-

present. Chair of Personnel Affair Committee of Engineering Technology Department Fall 2008-

Fall 2010 (two faculty were awarded tenure and promotion). Chair Faculty Search Committee for Engineering Technology Department (2016-2017) Chair of reappointment committee for evaluation of department of CSE (this work started

in the later part of 2014 and completed early 2015). Chair of Scholarship Committee for DFW chapter of National Association of Corrosion

Engineers 2010-present. Director of Mechanical, Manufacturing, and Nuclear division, University of North Texas,

Denton, Texas, August 2001- 2006 (part of executive committee in charge of department move from main campus to Research Park).

Program Coordinator of Mechanical Engineering Technology Program (2006-2009). Program Coordinator of Master of Science in Engineering Mechanical Systems (2009-

2010) Member of UNT faculty senate (September 2008-present). Member of UNT Graduate Council and Graduate Appeal, Admission Policy, and Toulouse

scholar selection Committees (subcommittees of Graduate Councils) University of North Texas 2002-2008.

Ad-hoc Chair of Personal Affair Committee of Electrical Engineering Department, University of North Texas, November 2005-2007.

Ad-hoc PAC member of Mechanical and Energy Engineering department Fall 2006 to 2008.

Research Scientist in charge of development of Thermal Dissorption Mass Spectrometer, Materials Science Department, University of North Texas, December 2000-August 2001.

Research Scientist in charge of development of UHV system for testing Field Emission Arrays in Materials Science Department, University of North Texas, December 2000- August 2001.

Director of International and Scientific Cooperation Office, Isfahan University of Technology, Isfahan-Iran during 1998-2000.

Founder of X-ray Diffraction Laboratory in Materials Engineering Department at Isfahan University of Technology, Isfahan, Iran, 1999.

Membership: Member of Center for Advanced Research and Technology and Clean Room

(CART/NFCR) advisory committee representing Engineering Technology Department. (2016-present)

Member of UNT Advanced Material and Manufacturing Processes Institute (AMMPI) by invitation of Vice-President for Research and Economical Development (Dr. Tom McCoy, 2015-present)

Member of Search Committee for Mechanical and Energy Engineering Department 2016-2017

4

Member of Ad hoc committee to write UNT College of Engineering Promotion and Tenure guideline (2013, 2015, 2016).

Member of an Ad-hoc PAC committee charged to review two-promotion application of two of our faculty (Dr. Elias Kougianos and Dr. Cheng Yu, 2015)

Member of an Ad-hoc PAC committee of Electrical Engineering for promotion of two senior faculty to full professor rank (2016)

Member of strategic planning committee of Engineering Technology Department (2011)

Member of College Graduate Curriculum Committee (2012-present) Member of Texas Department of Transportation (TXDOT) “Technical Advisory Panel”

of Research Management Committee 1, August 2005-2013. Member of search committee for Dean of the College of Engineering (2008). Member of UNT Service Learning Committee, 2002-2004. Member of search committee for selection of Chairman for Mechanical Engineering

Department, University of North Texas, November 2005. Member of Ad-hoc PAC committee for Materials Science Department, summer 2005. Member of faculty search committee for various selection of Engineering Technology

Department (Electronic, Construction and Manufacturing and Mechanical programs) 2002-present.

Member of R&D committee at Khozestan Steel Complex, Ahwaz, Iran during 1999-2000.

CONSULTING: PepsiCo food company/Frito-Lay/Quaker Emerson Process Management Halliburton, Scale Analysis Dominion Engineering- FIB/TEM Analysis of Steam Generator Tubing Materials Texas Utilities, Comanche Peak, Failure Analysis of Anti-rotational device Texas Utilities, Comanche Peak, Failure Analysis of Baffle Wall United Copper Industries - Made recommendations on modifying their processing line to

prevent damage in their product Failure Analysis of stabilizer of a crashed Fokker 100 Aircraft, Isfahan Iran Failure Analysis of Butterfly Valves for Tyson Foods in Fayetteville Arkansas Superior Industries- Failure Analysis of a steel pin- Fayetteville Arkansas

UNIVERSITY COMMITTEES & COUNCILS:June 2017- Present Research Space Adjudication SubcommitteeSeptember 2017-Present Liaison CENG to Mathematics/Physics/Chemistry September 2008-2014 Faculty senatorSeptember 2002- 2008 University Graduate Council member January 2002- 2004 Service Learning Committee member

DEPARTMENT COMMITTEES & COUNCILS:

5

September 2016- September 2017 Member Search Committee (Mechanical & Energy Engineering Department-UNT) September 2012- present Graduate Program Committee (Chair)January 2011- present Strategic Planning Committee (member)September 2008-2010 Personnel Affairs Committee (chairman)August 2001- 2006 Research Initiation Committee (chairman)August 2001- 2006 Executive Committee (member)August 2001- 2006 Recruitment & Retention Committee (member)August 2001- present Curriculum Committee (member)August 2001- present Assessment Committee (member)

GRANTS AND CONTRACTS:External Funded Research Grants and Contracts:List of sponsoring agencies abbreviations EPM= Emerson Process Management OTC= Oklahoma Transportation Center, NSF= National Science Foundation, TXDOT=Texas Department of Transportation, TXU=Texas Utilities, EPRI=Electric Power Research Institute, MSC= Mobarakeh Steel Complex (Iranian steel manufacturer), IUT= Isfahan University of Technology (Iran), ASHRAE= American Society of Heating Refrigeration and Air-conditioning Engineers, ASTA= Arkansas Science and Technology Authority, NACE =National Association of Corrosion EngineersAGENCY TITLE AMOUNT PI/Co-PI ARMY Tactical Shelter (Sept. 2016-Sept. 2017) $860,000 Co-PI (with 5 other

co-PIs)ARMY Tactical Shelter (Sept. 2017-Sept. 2018) $1,000,000 Co-PI (with 5 other Co-PIs)EPM Materials Characterization (Sept. through Dec. 2016) $2000 PI

NACE (DFW) Research scholarship award (matched with ETEC 5K) $5000

ASHRAE Development of New Accelerated Corrosion $179,250 PI(sole investigator) Test(s) for All-Aluminum Microchannel andTube and Fin Heat Exchangers (April 2014 through April 2017)

Niki Golf Materials Selection of Golf Club Heads $5000 PI(sole investigator)(January – May 2015)

EPM Characterization of regulators coating system $3200 PI(sole investigator)(May 2014)

NACE-DFW Scholarship award sponsored by DFW (2014) $5000 PI(sole investigator)

PEPSICO Characterization of Packaging materials (2013) $10,000 PI(sole investigator)

EPM Failure Analysis of Regulator and Screw Sets $6000 PI(sole investigator)(2013)

EPM Failure Analysis of Pressure Regulator Bolts $6000 PI(sole investigator)(2012)

OTC Characterization and Mediation of Microbial $300,000 Co-PIDeterioration of Concrete Structures

6

(Collaborative research with Oklahoma State University, my share $4500, June 2009- June 2012)

TXDOT Horizontal Cracking in Concrete Pavements $446,023 Co-PI(Collaborative research with Center for Transportation Research of UT-Austin, my share $105,889, September 2006-September 2009)

TXDOT Practical Applications of FTIR to Characterize Paving Materials (September 2007-August 2009) $99,622 PI (sole investigator)

TXDOT Application of FTIR for Quantitative Analysis of Lime $53,000 PI (sole investigator)(March 2007-March 2008)

TXU Investigation of Failed Anti-rotation Device and Weld Crack $15,000 PI (sole investigator)(July 2005-December 2007)

TXU Analysis and Characterization of Corrosion Products of $ 19,267 PI (sole investigator) Steam Generators and Feed Water Systems of CPSES(Jan. 2006 to August 2006)

EPRI Laboratory Testing to Evaluate Lead Adsorption $82,700 Co-PIUnder PWR Secondary Chemistry Conditions(Collaborative research with Old Dominion University, May 2005-December 2005, my share $6500)

TXU Analysis and Characterization of Corrosion Products of $ 82,076 PI (sole investigator) Steam Generators and Feed Water Systems of CPSES(Jan. 2005 to December 2005)

TXU Analysis and Characterization of Corrosion Products of $ 28,000 PI (sole investigator) Steam Generators and Feed Water Systems of CPSES(Jan. 2004 to December 2004)

TXU Analysis and Characterization of Corrosion Products of $ 20,000 PI (sole investigator) Steam Generators and Feed Water Systems of CPSES(Jan. 2003 to December 2003)

TXU Analysis and Characterization of Corrosion Products of $ 88,966 PI (sole investigator) Steam Generators and Feed Water Systems of CPSES(April 2002 to December 2002)

MSC Failure Analysis of a Hydro-coupling system $6,000 PI (sole investigator)(1999-2000)

MSC Study of Formability of Low C Steel Sheet $15,000 Co-PI(1997-1999)

ASHRAE Laboratory Evaluation of Ozone as a $60,000 PI (sole investigator)

7

Scale Inhibitor for Use in Cooling Systems (1993-1994)

ASTA Rust Transformer Development (1991-1992) $46,187 PI (sole investigator)Funded Internal Academic Grants:AGENCY TITLE AMOUNT PI/Co-PI UNT Installation and Calibration of XRF $11,832 PI

(September 2007)(This grant was sponsored by UNT VP-research office)

UNT Fourier Transform Infrared Spectroscope $20,000 PI(June 2004)

UNT EDS/XRF purchase (June 2002) $35,000 PI(Provided by VP-Research Dr. Goven)

IUT Deposition of Diamond Films on Si and $5,000 PIWC-CO substrates Using Hot FilamentChemical Vapor Deposition (HFCVD) (sponsored by IUT Research office 1999-2000)

In addition, I wrote a proposal to recommend purchasing a $350,000 Environmental Scanning Electron Microscope (ESEM) using U.S. Congress Funding of UNT and helped establish ESEM laboratory in MSE department (April 2005 – December 2005).

Research and Teaching Equipment Acquired:AGENCY TITLE AMOUNT PI/Co-PI TXDOT X-ray Fluorescence System $45,000 PI

(September 2007)

TXU Laser Induced Breakdown Spectroscope $75,000 PI (September 2004)

CMI Plastics Upgrade of Thermoforming Unit (August 2002) $10,000 CO-PIInc.

ALCATEL Acquisition of Laboratory Equipment $150,000 PI Inc. (September 2002) (Estimated present value)

(Included in this donation were an electron microscope, a tensile tester, three polishing tables, a hardness tester, an environmental chamber, an optical microscope, Thermal Gravimetric Analyzer, etc that greatly improved undergraduate materials laboratory (ENGR 3450 course)

TRANE Acquisition of a New Heat Pump $6,500 PI `Inc. (April 2002)

(This residential package I acquired from TRANE manufacturing in Dallas contains both a four tons air condition and heating unit is used in thermal science laboratory to train undergraduate students on basics of air conditioning and heating devices).

Funded Education/Instructional/Training Grants and Contracts:

8

AGENCY TITLE AMOUNT PI/Co-PI ASHRAE Design and Development of Modules for Thermal- $5,000 PI (sole investigator)

Conductivity and Fin analysis (June 2004 to May 2005)

ASHRAE Design and Development of Modules used in Thermal- $5,000 PI (sole investigator)Fluid Sciences Laboratory Course (June 2002 to May 2003)

NSF Planning for an Innovative Interdisciplinary $ 99,954 Co-PIMechanical and Energy Engineering Curriculum +$20,026 supplement (September 2005 to September 2006)

UNT Service Learning Mini-Grant, Design and Construction $1,000 PIof an evaporative cooler (2005)

ASHRAE Chapter Support 2002 (April 2002) $750 PI

ASHRAE Chapter Support (May 2006) $1500 PI

Submitted Federal & State Grants Currently under Review:AGENCY TITLE AMOUNT PI/Co-PI NSF Explore Conscious Research in Engineering Technology Pedagogy $299,250 Co-PI

(Sept. 2017-Sept. 2020)

ASHRAE Impact of Air-Flow on Thermal Performance of Air-Spaces $98,800 PI with 2Co-PIs Behind Cladding (Phase 1 of 2)"(1759-TRP)(4/17-8/18)

ASHRAE Experimental Evaluation of Two-Phase Pressure Drop and $149,851 Co-PIFlow Pattern in U-Bends with Ammonia. (4/17-10-19)

ASHRAE Update of clothing database for existing and new Western $170,000 Co-PI clothing ensembles, including effects of posture, body and air movement (4/17-7/18)

Not Funded Grants and Contracts:AGENCY TITLE AMOUNT PI/Co-PI ASHRAE Investigation of Airside Fouling on Outdoor Heat Exchangers $200,000 PI

(sole investigator) April 2015 – April 2017

ASHRAE S. Nasrazadani (PI, 70%), H. Bostanci (co-PI, 30%), “Impact of Gaseous Contamination and High Humidity on the Reliable Operation of Information Technology Equipment in Data Centers”, $250,000.00, ASHRAE TRP-1755 (Dec. 2015)

TxDOT S. Nasrazadani (PI) 100%, Chemical Solutions to Concrete Durability Problems, $147,406.00, TxDOT, Oct. 2015

NSF Design of Novel Supramolecular Metalloid Cluster white paper Co-PI Networks with Tunable Superhydrophobic-to-Hydrophilic Properties: From Fundamental Structure-Property Correlations to Dual Anti-Ice/Anti-Corrosion

9

Functions in Navy Applications, white paper ONR FY2015 MURI Topic 17, DOD. (Dec. 2014)

NSF Undergraduate Research in Engineering Technology $599,951 Co-PI

NSF A Research Integrated Path for Engineering and Engineering and Engineering Technology WorkforceDevelopment $1,500,000 Participant

ASHRAE Solid State Heat Rejection Chiller $11,929 Advisor (Senior design project proposal)

TxDOT Synthesis on Geosynthetic-Reinforced Steep Slopes $49,997 Co-PI(2012)

TxDOT Automated Crack Documentation using Digital Images $63,681 Co-PI(2012)

ASHRAE Measurement and Prediction of Waterside Fouling $228,124 PI Performance of Internally Enhanced Condenser Tubes used in Cooling Tower Applications (2012)

(This proposal was ready to be submitted but due to technical difficulty with website of office of sponsored research it did not get submitted)

SHRP 2 A Safe and Green Cantilever Arm Traffic Signal Structure $150,000 Co-PI(Submitted September 2011)

DOE Acquisition of a Femtosecond Laser System for Interdisciplinary$300,000 ParticipantNS&E R&D and Education in the North Texas Region(Collaborative proposal between UT-Dallas and UNT submitted spring 2011

EPRI Effect of Material Form on Flow Accelerated Corrosion of $243,521 PICarbon Steels (submitted April 2011)

WSDOT Determining the Cost/Benefit of Routine Maintenance $75,000 PI Cleaning of Steel Bridges to Prevent Structural Deterioration

SHRP 2 Application of FTIR for Alkali Quantification in Cement $174, 485 PI(Federal Highway (submitted September 2010)Administration)

TxDOT Synthesis of Microsurfacing Successes and Failures $49,996 PI(submitted September 2010)

SHRP 2 Evaluating Applications of Field Spectroscopy Devices $369,532 PI(Federal Highway to Fingerprint Commonly Used Construction MaterialsAdministration) (January 2009-January 2011)

NSF Acquisition of an E-beam Lithography and RIE Toolset for 675,240 Participant Nano/microfabrication flexibility (2007)

NTxRCIC Hydrogen Fueling System Technology (2006) 1,478,000 CO-PI

10

TXDOT Guidelines for the Use of Fly Ash and Ground 116,000 PIGranualated Blast Furnace Slag Blends in Concrete Pavement (2005)

CRDF Cubic Boron Nitride Deposition on Turbine Blade Materials 86,000 PI(2003)

EPRI Application of FTIR for Iron Oxide Analysis (2003) 240,000 PI

NSF Acquisition of a Double Crystal X-ray Diffracometer 150,000 CO-PIfor Materials Research and Instruction (2002)

Welch Fund Interaction of Phosphoric, tannic, and a Commercial 150,000 PISurficant on Iron Oxides anf Iron Hydroxides (2002)

NSF Combined Research and Curriculum Development in 500,000 CO-PI Materials Engineering and Nanoscale Science and Engineering (2002)

Air Force Biological Decontamination of Forward-Deployed Airbase 85,000 CO-PI Using Low Temperature Air Plasmas (2002)

DARPA Micro Scale Deformation Modeling Thin Films for Integration 362,000 CO-PI in the Design of Micro Systems (2001)

ACADEMIC ACTIVITIES:UNDERGRADUATE (UG) and GRADUATE (G) COURSES TAUGHT (at UNT)

1. Corrosion Engineering Technology (MSET 5800, G)2. Heat Transfer Applications (MEET 4350, UG)3. Engineering Materials (ENGR 3450, UG)4. Engineering Mechanics-Statics (ENGR 2301, UG)5. Engineering Mechanics-Dynamics (ENGR 2302, UG)6. Senior Design Project I (MEET 4780, UG)7. Senior Design Project II (MEET 4790, UG)8. Product Design and Development (MSES 5030, G)9. Failure Analysis and Electron Microscopy (MSES 5150,G)

OTHER COURSES TAUGHT AT OTHER INSTITUTIONS1. Corrosion Engineering (Isfahan University of Technology, UG)2. Modern Materials Characterization Techniques (Isfahan University of Technology,

UG)3. Engineering Materials (University of Arkansas, Isfahan University of Technology, UG)4. Advanced Materials Laboratory (University of Arkansas, UG) 5. Principles of Physical Metallurgy (University of Arkansas, G)6. Modern Electrochemistry (Isfahan University of Technology, G)7. Advanced Metallography and Surface Analysis (Isfahan University of Technology, G)

GRADUATE STUDENTS ADVISED (Current and Completed):

11

Current:1. Morteza Heydari (PhD-Dissertation,Co-Major Professor): MEEN Department2. Apurva Patel (MS- Project): Pitting Characteristics of AA 3102 All-Aluminum

Microchannel Heat Exchangers (Expected to complete Dec. 2017)3. Mst Alpona Akhtar: (MS Thesis) Development of Hydrophobic AISI-SAE 1018 Steel

Surfaces (Expected to complete Dec. 2017)4. Saritha Sekar (MS-Project)- Pitting Corrosion of AA 3102 (Expected to complete

Dec. 2017)

Completed:

1. Ammal Al-Shenawa PhD Dissertation, “Effectiveness of Fillers for Corrosion Protection of AISI-SAE 1018 Steel in Sea Salt Solution” (co-advisor completed Dec. 2016)

2. Haydn Vaughan MS Thesis, “Accelerated Corrosion Test with Operation Simulation of All Aluminum Microchannel Heat Exchangers” (completed May 2016)

3. Mohammad Dorreyatim MS Thesis, “Cyclic Polarization of AA 3102 in Corrosive Electrolytes Containing Sodium Chloride and Ammonium Sulfate” (completed Dec. 2016)

4. Javier Barnes MS Thesis, “Application of cyclic polarization of Al 3003 used in all-Aluminum microchannel heat exchangers”, (graduated May 2015)

5. Mustafa Rawshdeh MS Thesis (graduate Dec. 2015)6. Nick Evans, (UNT-ETEC) MS project (completed May 2015)7. Johnathan Gallo MS project (completed May 2015)8. Pooja Dronavalli MS project (graduated May 2015)9. Venkata Venkatesh MS project (graduate May 2015)10. Siddhartha Vasireddy MS project (expected to graduate Dec. 2014)11. Elias Sudoi, (UNT-MSE) MS-project student in Materials Science and Engineering

Department (completed Dec. 2013)12. Ameya Phadnis, (UNT-ETEC) MS-thesis, ”Corrosion Protection of Low Carbon Steel

by Cation Substituted Magnetite in 3.5% NaCl Solution” completed May 201313. Patrick Zimmerer, (UNT-ETEC) MS project, completed May 201314. Rusty McFarland, (UNT-ETEC) MS project completed December 201315. Juan Zapata, (UNT-ETEC) MS project, completed December 201116. Kent Kallenberger (UNT-ETEC) MS project, completed December 201217. Luis Reyes (UNT-ETEC) MS project, completed December 201218. Tyler Springfield, (UNT-ETEC) MS thesis: “Quantification and Phase Identification

of Alkali in Cement using FTIR” – completed May 2011.19. Ansel Reid, (UNT-ETEC) MS project: “Design and Failure Analysis of an Aluminum

Lug Connector” – completed May 2011.20. Naresh Ramasamy, (UNT-ETEC) MS thesis completed: “Effect of Polyphosphoric

Acid on Aging Characteristics of PG 64-22 Asphalt Binder” completed December 2010.

12

21. Ardeep Apti, (UNT-ETEC) MS Thesis: “Effects of Rebar Temperature and water to Cement Ratio on Rebar-Concrete Bond Strength of Concrete Containing Fly Ash” completed May 2010.

22. Elias Sudoi, (UNT-ETEC) MS Thesis: “Early Age Cracking in Continuously Reinforced Concrete Pavements” completed August 2008.

23. Ravi Kumar, (UNT-ETEC) MS Thesis: “Flow Accelerated Corrosion Experience at Comanche Peak Steam Electric Station” completed May 2008.

24. Haritha Namduri, (UNT-MTSC) PhD Dissertation (Sole Advisor):” Formation and Quantification of Corrosion Deposits in Power Industry” completed May 2007.

25. Walter Maranon, (UNT-ETEC) MS Thesis: “Characterization of Boron Nitride Thin Films on Silicon (100) Wafers” completed August 2007.

26. Vaishali Paliwal, (UNT-MTSC) MS thesis: “Lead Sorption on Magnetite (Fe3O4) at High Temperatures” completed December 2006.

27. Duncan Paul Hyden, (UNT-ETEC) non-thesis MS student graduated Summer 2007.a. (Substituted for Dr. Monty Smith)

28. Diego Lerner, (UNT-ETEC) non-thesis MS student graduated Fall 2005.29. Thang Nuygent, (UNT-ETEC) non-thesis MS student graduated 2004.30. Sunitha Vegerla, (UNT-ETEC) non-thesis MS student graduated 2004. 31. Parasanna Vamuri, (UNT-ETEC) MS thesis: “Deposition of cBN on WC-CO and

Silicon wafers using e-beam evaporation method” completed May 2004. 32. Jorge Diaz, (UNT-ETEC) MS thesis: “Effect of Amines as Corrosion Inhibitors for a

Low Carbon Steel in Power Industry” completed December 2004. 33. Haritha Namduri, (UNT-ETEC) MS thesis:”Characterization of Corrosion Products

from Comanche Peak Power Station” completed May 2003. 34. Mozhgan Gholami, (IUT) MS thesis: “Inhibitor Evaluation Using Electrochemical

Methods for Chemicals Used in Power Industry”, completed December 2001. 35. Hamid Salimi, (IUT) MS thesis: “Diamond Thin Film Formation Using Hot Filament

Chemical Vapor Deposition on WC-CO Inserts,” completed December1999.36. Kivan Raeissi, (IUT) MS thesis: “Development of Four Slurry Coatings for Protection

of Alloy Steels,” completed December 1999.37. Mohammad Khosravy, (IUT) MS thesis: “Formation and Characterization of Thin

Films of Magnetite on Steels” completed December 1999.38. Farzaneh Zandi, (IUT) MS thesis: “Hot Deformation Evaluation of Ti-Nb Alloy Steel,”

completed December 1999.39. Mahmoud Taher, (University of Arkansas) MS thesis: “Application of Diamond Thin

Films for Tooling,” completed May 1995.40. Tah Jin Chao, (University of Arkansas) MS thesis: “Laboratory Evaluation of Ozone

as a Scale Inhibitor for Use in Open Recalculating Cooling Systems,” completed August1994.

41. Lewis Scott Carrol, (University of Arkansas) MS thesis: “Effect of Phosphoric-Tannic Acids on Rust Transformation and Rusting Kinetics of a Low Carbon Steel,” completed December 1993.

Member of Advisory Committee for the Following Graduate Students (all at UNT):1. Jihyung Lee- PhD Dissertation (Materials Science and Engineering, Expected Dec. 19)2. Christopher Ozigagu, PhD Dissertation (Chemistry, expected Dec. 2019)

13

3. Vahid Hasannaeimi PhD Dissertation (expected to graduate Dec. 2018)4. Amir-Hossein Bagheri PhD Dissertation (expected to graduate Dec. 2018)5. Mohammad Awaizulla Shareef (thesis) ETEC completed May 20176. Nathan Derrick (thesis) ETEC completed August 20177. Zhishan Yan (thesis) ETEC completed Dec. 20178. Amir-Hossein Bagheri (thesis) ETEC Department (completed 2015)9. Sohrab Mirzaabedini, MS thesis (MSE, completed Dec. 2016)10. Mohammed Awaizulla Shareef , MS thesis (Etech expected to complete August

2017) 11. Pashupati Raj Adhikari, MS thesis (Etech, completed May 2016)12. Syed Hussain Reza Rizvi MS thesis (MEEN completed Dec. 2015)13. Satvik Janardhan Yaddanapudi (thesis) ETEC Department (completed 2015)14. Martin Luther Dara (thesis) ETEC Department (completed 2015)15. Sai Sujith Obuladinne, MS thesis (Etech, completed 2016)16. Joshua Nihal MS (thesis) ETEC Department (completed 2014)17. Rajamure Ravi Shanker PhD Dissertation MSE Department (completed 2014)18. Xia Changli active PhD Dissertation MSE Department19. Zhiguang Ding active PhD Dissertation MSE Department20. Yuanye Bao MS thesis ETEC Department (completed 2014)21. Mehdi Ahmadi MS thesis ETEC Department (completed 2013)22. Afzalul Karim MS thesis ETEC Department (completed 2013)23. Yujie Chen MS thesis ETEC Department (Completed 2009)24. Ke Xu MS MS thesis ETEC Department (Completed 2009)25. Shridhar MS thesis) Materials Science and Engineering (completed December 2009)26. Ibraheem Adel Sheerah, MS thesis ETEC Department (completed May 2009)27. Vasim Abdul Majid Shaikh, MS thesis ETEC Deptartment (Completed Fall 2008)28. Thomas North, MS thesis ETEC Department (completed Spring 2008)29. Hitesh Dhirajlal Vora, MS thesis ETEC Deptartment (Completed Fall 2008)30. Khan Nguyen, MS project ETEC Department. (completed 2008)31. Suma Vavilala, PhD student in Chemistry department (Completed)32. Tyler DeLaCerda, MSET/MBA student in Engineering Technology Dept.

(Completed)33. Samuel Rausch, MSET/MBA student in Engineering Technology Dept. (Completed)34. Padma Parakala, MS (thesis) student in Engineering Technology Department.

(Completed)35. Raj Pathapragada, MS (thesis) student in Engineering Technology Department.

(Completed)

Senior Design Projects/Students Sponsored as Project Advisor:

1. Hand Driven Clutch Mechanism, Khoa Bui, Collin Clarke, Luan Nguyen, Robert Rudeau (May 2016).

2. Heated Mattress Design and Construction, (4 MEET UG students) (Fall 2016)3. Anodizing of Ti alloys for Color Formation, (3 MEET UG students) (Fall 2016)

14

4. Impeller Design, Edwin Chavez, Darin Cooper, David Gorman, Jacob McNealy, and Joseph Swearingen, sponsored by Frito-Lay Spring 2013

5. Aircraft Seating Cover Placement, Brian Andrews, Anthony Brooks, and Denesh Kumar, sponsored by Bell Helicopter Spring 2014

6. Project Cool out, Adam Avis, Dalton Hausler, Jason Smith, and Travis Mayberry, Spring 2012.

7. Matt Splittgerber, Ilyas Cetinkaya, Stephen Buko, Marcus Johnson, Mohammed Alali, “Design and Construction of a Cyclone Separator,” Sponsored by Peerless Manufacturing Company, spring 2011.

8. Mike Thedford, Ryan Hammel, Jeff Knape, Seth Rogers “Design and Construction of a Compact Vertical Gas Separator,” Sponsored by Peerless Manufacturing Company, Spring 2011.

9. Sebastian Delgadillo, Prasanna Aryal, Jehad Alnassir, and Yolanda Meza, “Design of a Physical vapor Deposition System,” Sponsored by UNT-ETEC Department, Spring 2010.

10. Isaac Anderson, George Arriage, Sam Foster, Jacob Reimers, “Reverse Flow Cooling Systems,” Sponsored by PACCAR- Peterbilt Motors, Spring 2009.

11. Bryan Wright, Rugare Marimira, Umer Farooq, David Mielke, “Design and Construction of a Turbulative Heat Exchanger,” Sponsored by Exact Exchanger Incorporated- Carrollton TX, Spring 2009.

12. Joseph VanHooser, Brian Rice, David Bunce, Thomas Myers, “Ion Source Testing Station,” Sponsored by Oak Ridge Associated Universities, Spring 2009.

13. Joy Wilson, Esteban Eureste, Cody Green “design and construction of a refrigeration system for truck cabins,” Sponsored by PACCAR-Peterbilt Motors, Spring 2008.

14. Peter Stanley, “Pressure Gradient Chimney Design,” Sponsored by a local HVAC companies in Dallas, Spring 2008.

15. Joseph Figueroa, Rusty McFarland, John Hoffman, Doug Lantz, and David Cortez, “Fluid Flow through a Porous Plate,” Sponsored by Peerless Manufacturing- Dallas Texas, Spring 2007.

16. Richard Carson, Rene Guia, Travis Leigh, Andrew Phipps, “Erosive Wear Simulation in Elastomeric Components of a Pressure Reducing Regulator” sponsored by Emerson Process Management through a $66,974.81 grant, McKinney Texas, Spring 2006.

15

17. Stephen Strudivant, Robert Chatman, Dan Kysely, Kenji Uhera, Nguyen Khanh, “Design and Development for Measuring the Thermal Conductivity of Various Metals,” sponsored by ASHRAE through a $5000.00 grant I received from ASHRAE, Spring 2005.

18. Frank Armstrong, Thomas Ford, Tyler DeLacerda, Rachel Forsyth, David Flower, “Design and Construction of a Heat Exchanger Analyzer,” sponsored by ASHRAE through a $5000.00 grant I received from ASHRAE, Spring 2003.

PUBLICATIONS:

Following is google-scholar citation:

Published Book Chapters & Monographs:

16

1. CHAPTER 2 of “Handbook of Oil and Gas Industries,” S. Nasrazadani, Sh. Hassani, “Modern Analytical Techniques and Materials Characterizations in Failure Analysis,” Elsevier Publishing Company (2015) USA.

2. CHAPTER 18 of the textbook entitled “ADVANCED ELECTRONIC PACKAGING”, E. Clark, I. Fritsch, S. Nasrazadani, and C. Henry, (chapter 18, pp. 725-791) IEEE-Press, Wiley-Interscience 2006 NY, NY USA and simultaneously in Canada.

3. CHAPTER 16 of the textbook entitled “ADVANCED ELECTRONIC PACKAGING” with emphasis on Multi-Chip Modules, S. Nasrazadani, I. Fritsch, and C. Henry, (chapter 16, pp. 625-696) IEEE-Press Oct. 1999 NY, NY USA.

4. Materials Science and Engineering Laboratory Manual, S. Nasrazadani, September 2003, Ron Jons Publishing, (ISBN: 1-56870-497-6).

Published Peer Reviewed Journal and Conference Proceedings

Publications: (*= student co-author; italic= UNT faculty co-author)

2018

5. H. Bostanci, S.S. Altalidi*, and S. Nasrazadani, Two-phase spray cooling with HFC-134a and HFO-1234yf on practical enhanced surfaces, Applied Thermal Engineering, 131 (2018) 150-158.

2017

6. S. Nasrazadani, A. Bagheri*, H. Bostanci, Impact of Internal Pipe Grooves on Flow Accelerated Corrosion of Small-Bore A-106 Carbon Steel Pipes, Journal of Failure Analysis and Prevention Vol. 17 No. 3 pp. 417-425 (2017) (http://rdcu.be/yqLs).

7. Huseyin Bostanci, Sulaiman Altalidi, Seifollah Nasrazadani, Two-phase spray cooling with HFC-134a and HFO-1234yf on practical enhanced surfaces, Journal of Applied Thermal Engineering (accepted)

8. Amaal Al Shenawa, Nandika D’Souza, Seifollah Nasrazadani, Thomas Scharf, Effect of CO2 on Corrosion and Wear Resistances of Bismaliemide Coating Filled with Organophilic Montmorillonite Clay, Proceeding of Society of Plastics Engineers (SPE) annual conference Houston Texas, March 2017.

17

9. S. Nasrazadani, Mst Alpona Akhtar, Apurva Patel, Chris Ezell, Failure Analysis of API 5L (Grade B) Oil Field Separator Flowline Pipe, Journal of Failure Analysis and Prevention. (Accepted)

10. S. Nasrazadani, Cyclic Polarization of AA 3102 in Various Corrosive Electrolytes, 2018 ASHRAE Winter Conference, January 20-24 Chicago, IL

11. S. Nasrazadani, S. Sekar, X. Wang, F. Gamez-Rivas, Training Graduate Students in Utilization of Analytical Instruments in a Failure Analysis Course, proceeding of 2018 ASEE GSW conference Austin Texas April 2018.

2016

12. Seifollah Nasrazadani,Venkata Venkatesh Nagulakonda*, Javier Barnes*, Andres, Garcia*, Amaal, Al-Shenawa*, and Nandika Ann D’Souza, “Effects of Heat Treatment Processes on Corrosion Resistance of Epoxy-Coated Rebar Steel”, Journal of Failure Analysis and Prevention, October 2016, Vol. 16 Issue 5, pp. 896-901.

13. S. Nasrazadani, S. Nakka*, “Characterization of Corrosion Products in RTPF and All-Aluminum Microchannel Heat Exchangers”, Journal of Failure Analysis and Prevention, April 2016, Volume 16, issue 2, pp 189-196.

14. S. Nasrazadani, R. Eghtesad*, E. Sudoi*, S. Vupputuri*, J.D. Ramsey, M. T. Ley, “Application of Fuorier transform infrared spectroscopy to Study Concrete Degradation Induced by Biogenic Sulfuric Acid”, Materials and Structures, May 2016, Volume 49, Issue 5, pp 2025-2034.

15. S. Nasrazadani, A. Nouri, P. Adhikari*, “Enhancement of Laboratory Experience by Addition of Advanced Techniques in Undergraduate Mechanical Engineering and Technology programs”, ASEE GSW March 2016, TCU, Fort Worth Texas.

2015

16. Sravanthi Vupputuri*, Badu Z. Fathepure, Gregory G. Wilber, Elias Sudoi*, Seifollah Nasrazadani, M. Tyler Lay, Joshua D. Ramsey, “Isolation of a Sulfur-Oxidizing Streptomyces sp. From Deteriorating Bridge Structures and its Role in Concrete Deterioration” International Biodeterioration & Biodegradation Vol. 97, January- February (2015) pp. 128-134.

17. Changlei Xia*, Sheldon Q Shi, Liping Cai, Seifollah Nasrazadani “Increasing the Nanoparticle Loading Efficiency by Introducing External Pressure during the Inorganic Nanoparticle Impregnation Process for Natural Fibers,” International Journal of Industrial Crops and Products vol. 69 (2015) pp. 395-399.

18

18. S. Nasrazadani, N. Gupta*, A. Bastola*, “Flow Accelerated Corrosion of Welded Small Bore A106 Carbon Steel Pipe,” CORROSION 2015- annual conference of National Association of Corrosion Engineers, March 15-19 Dallas TX (2015)

19. S. Nasrazadani, “Advanced Analytical Techniques for Characterization of Rusted Steels,” CORROSION 2015- annual conference of National Association of Corrosion Engineers, March 15-19 Dallas TX (2015)

20. Waleed K. Yaseen* . Mustafa A. Rawshdeh*. Teresa D. Golden, Seifollah Nasrazadani, and Mohammad A. Omary, “Utilizing Hydrophobic Coatings in Corrosion Protection and Anti-Icing, Poster session of ACS Southeast (SERMACS)/Southwest (SWRM) regional meeting 2015.

2014

21. Z. Huang, Q. Al-Saad*, and S. Nasrazadani, Understanding and Optimizing Geosynthetic-Reinforced Steep Slopes, Electronic Journal of Geotechnical Engineering Vol. 19, 2014.

22. S. Nasrazadani, Elias Sudoi*, “Effect of Welding on Flow Accelerated Corrosion of Carbon Steel Pipes”, Proceedings of Corrosion 2014 Conference & Expo, San Antonio Texas March 9-13, 2014.

23. S. Nasrazadani and Tyler Springfield*, “ Application of Infrared Spectroscopy in Cement Alkali Quantification”, Journal of Materials and Structures, Vol.47, pp. 1607-1615 (2014).

2013

24. S. Nasrazadani and Devon Henkis*, “A recent experience in utilization of online resources in teaching undergraduate dynamics”, Proceedings of the 2013 ASEE Gulf-Southwest Annual Conference, The University of Texas at Arlington, March 21-23, 2013.

25. S. Nasrazadani and P. White*, “Failure Analysis of a Fractured Wrench Socket”, Journal of Failure Analysis and Prevention, Vol. 13: pp. 673-677 (2013).

26. S. Nasrazadani, K. Kallenberger*, and H. Vaughan*, Design and Construction of a Cost Effective Jominy Bar Testing Setup, Journal of Materials Education, Vol. 35 (3-4): pp. 57-70 (2013).

2012

27. S. Nasrazadani and L. Reyes*, (2012) “Failure Analysis of Al 356-T6 Clutch Lever”, Journal of Failure Analysis and Prevention, Vol. 12, pp. 24-29.

2011

19

28. Jim Stevens and Seifollah Nasrazadani, (2011) “New Advanced Amines for Secondary Cycle Systems of Pressurized Water Reactor Plants”, Power Plant Chemistry, Vol. 13, No. 4, pp. 216-224.

29. Seifollah Nasrazadani and Luis Reyes*, (2011) “Failure Analysis of Al A356 T-3 Clutch Lever”, Journal of Failure Analysis and Prevention, (Accepted with minor corrections).

30. Seifollah Nasrazadani, (2011) “Applications of Fourier Transform Infrared Spectrophotometry (FTIR) in Characterization of Construction Materials,” Proceedings of GEO-FRONTIERS 2011, March 13-16, 2011, Dallas Texas.

31. Seifollah Nasrazadani, Ansel Reid*, Jim Stevens, Robert Theimer, Billy Fellers, (2011) “Comparison of DBU, NH3, DMA, ETA, and Morpholine Interactions with Ferrous Chloride Solution and Carbon Steel Surfaces,” 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, sponsored by The Minerals, Metals & Materials Society, 7-11 August 2011Colorado Springs Colorado.

32. Nandika Anne D'Souza, Seifollah Nasrazadani, Parag Ganpole*, (2011) “Corrosion and Flame Retardant Polymer Coatings for Oilfield Applications,” Offshore Technology Conference, May 2-5, 2011, Houston Texas.

2010

33. Haritha Namudri* and Seifollah Nasrazadani, (2010) “Evaluation of DBU as a Corrosion Inhibitor for a Pressurized Water Reactor”, Materials Performance, Vol. 49, No. 9, pp. 49-51.

34. Samuel, S*. Nasrazadani, S., El Bounani, M., Ngyugen, K*. & Banerjee, R. (2010). “Corrosion Resistance and In-Vitro Response of Laser-Deposited Ti-Nb-Zr-Ta Alloys for Orthopedic Implant Applications”, Journal of Biomedical Materials research, Part A Vol. 94A Issue 4, pp. 1251-1256.

35. Seifollah Nasrazadani and Elias Sudoi*, (2010) “A Review of Biodeterioration of Concrete Structures”, Conference Proceeding of CORROSION 2010 sponsored by National Association of Corrosion Engineers, San Antonio Texas, March 14-18, 2010.

36. Jim Stevens and Seifollah Nasrazadani, (2010) “New Advanced Amine for Secondary Systems in Pressurized Water Reactor Plants”, Nuclear Plant Chemistry Conference (NPC) 2010, October 3-7 2010, Quebec City, Canada.

37. S. Nasrazadani , E. Sudoi*, G. Silva*, (2010) “An investigation of wire breaks created during Copper wire-drawing manufacturing”, Materials Science &Technology 2010 (MS&T 2010), October 17-21 Houston Texas USA.

20

38. S. Nasrazadani , (2010) “Under Insulation Corrosion of Piping Systems”, Materials Science &Technology 2010 (MS&T 2010), October 17-21 Houston Texas USA.

2009

39. S. Nasrazadani , R. Kumar*, D. Hopkins, and J. Stevens (2009) “Characterization of Oxides on Small-Bore Carbon Steel Piping from FAC Susceptible Areas of the High Pressure Extraction Steam System at the Comanche Peak Nuclear Power Plant”, International Journal of Pressure Vessels and Piping, Vol. 86, 845-852.

40. S. Nasrazadani (2009) “Investigation of Failed Pin Carrier Plate for the Anti-Rotation Device in a Motor”, Journal of Failure Analysis and Prevention, Vol. 9 pp. 234-239.

41. S. Nasrazadani, E. Sudoi* , (2009) “Factors influencing concrete-rebar bond failure in continually reinforced concrete pavements’ 88th annual conference of Transportation Research Board of the National Academies, Washington DC, January 11-14, 2009, paper No. 09-0764.

2008

42. H. Namduri* and S. Nasrazadani (2008) “Quantitative analysis of iron oxides using Fourier Transform Infrared Spectroscopy”, Corrosion Science, Vol. 50 pp. 2493-2497.

43. S. Nasrazadani , H.R. Salimijazi*, F. Ashrafizadeh (2008) “Laboratory Experiment on Diamond Thin Film Deposition”, Journal of Materials Education, Vol. 30 (5-6) pp. 397-406.

44. S. Nasrazadani . A. Reid*, B. Fellers, J. Stevens, and R. Theimer (2008) “Compatibility of DBU and Elastomeric Materials”, CORROSION –NACE, Vol. 64, No. 11, pp. 871-877.

45. S. Nasrazadani , V. Paliwal*, M. Du, R.F. Reidy, J. Stevens, and R. Theimer (2008) “Lead (Pb2+) Adsorption on Magnetite (Fe3O4) at 200 ◦C, Corrosion-NACE, Vol. 64, No. 6, pp. 509-516.

46. H. Namduri* and S. Nasrazadani (2008) “Evaluation of DBU as Corrosion Inhibitor for Secondary Cycle of Pressurized water Reactors”, CORROSION 2008, Paper No. 08363 NACE March 16-20, 2008 New Orleans LA.

2007

47. S. Nasrazadani (2007) “Design and Construction of a Heat Exchanger Analyzer for an Undergraduate Thermal-Fluid Laboratory”, International Journal of Engineering

21

Education, Vol. 23, No. 3, pp. 618-628. Peer reviewed journal, result of ASHRAE education grant.

48. S. Nasrazadani , J. Diaz*, J. Stevens, and R. Theimer (2007) “Effects of DBU, Morpholine, and DMA on Corrosion of Low Carbon Steel Exposed to Steam”, Corrosion Science, Vol. 49, pp. 3024-3039.

49. S. Nasrazadani , P. Vemuri*, and W. Maranon* (2007) “Direct Deposition of Boron Nitride Films Using E-beam Evaporation on Si (100) Without N Bombardment“, 2007 Virtual Conference on Nanoscale Science and Technology, VC-NST, October 21-25, 2007, Fayetteville Arkansas, USA.

50. S. Nasrazadani , V. Paliwal*, J. Stevens, R. Theimer, (2007) “Lead (Pb2+) Adsorption on Magnetite (Fe3O4) at 200 ◦C”, 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems, August 19-23, 2007 Whistler, B.C. Canada.

51. S. Nasrazadani and R. Mirshams (2007) “Teaching Heat Transfer through Industrial Partnership”, 114th annual conference and exhibition of American Society of Engineering Education (ASEE) held June 24-27, 2007 - Honolulu, Hawaii, USA.

2006

52. S. Nasrazadani and H. Namduri* (2006) “Study of Phase Transformation in Iron Oxides Using Laser Induced Breakdown Spectroscopy (LIBS), Spectrochimica Acta, Part B 61 565-571.

53. S. Nasrazadani , and H. Namduri*, (2006) “Secondary System Oxide and Lead Study at Comanche Peak” J. Stevens, R. Theimer, Proceeding of International Conference on Water Chemistry of Nuclear Reactor Systems, Jeju Island South Koria, October 2006. Result of TXU research grant.

54. H. Namduri* and S. Nasrazadani, (2006) “AC-impedance Spectroscopy for Studying the effect of Amines on Alloy 600, CORROSION 2006, NACE paper #6406, March 12-16, 2006 San Diego CA.

2005

55. S. Nasrazadani , H. Namduri*, J. Stevens, R. Theimer, (2005) “Quantitative Morphological Characterization of Deposits Formed in Secondary Side of Comanche Peak Steam Electric Station Using Scanning Electron Microscopy”, TMS (The Minerals, Metals & Materials Society) 12th International Conference on Environmental Degradation of Materials in Nuclear Systems-Water Reactors”, Salt Lake City Utah, USA August 14-18, 2005.

56. S. Nasrazadani and P. Vemuri*, (2005) “Synthesis of Cubic Boron Nitride Thin Films on Silicon Substrate Using Electron Beam Evaporation”, Conference Proceeding 788,

22

American Institute of Physics, Characterization and Metrology for ULSI Technology 2005, p. 501-506, (ISBN: 0-7354-0277-9) MARCH 15-18 2005 Dallas Texas.

2003

57. Padma Parakala*, Reza Mirshams, Seifollah Nasrazadani, and Kun Lian, (2003), “Effects of Thickness and Indenter Geometry in Nanoindentation of Nickel Thin Films”, Proceedings of Materials Research Society Symposium, MRS Vol. 795, U11.19.1, Fall 2003.

58. S. Nasrazadani , P. Vemuri*, and S. Burckhard*, (2003) “Evaluation of Magnetite Coating for Temporary Protection of Carbon Steels”, CORROSION 2003, NACE paper # 3483, March 16-20,2003, San Diego CA, USA.

2002

59. S. Nasrazadani , K. Raeissi*, (2002) “Comparison of Four Slurry Coatings for Oxidation Resistance of a Low Alloy Steel”, CORROSION 2002, NACE paper #2368, April 7-12, 2002, Colorado, USA.

60. S. Nasrazadani , S. Carroll*, (2002) “Evaluation of Phosphoric and Tannic Acids as Corrosion Inhibitor for Clean and Rusted Low Carbon Steel,” CORROSION NACExpo 2002, paper #2367, April 7-12, 2002, Colorado, USA.

2000

61. S. Nasrazadani , (2000) “Characterization of Cubic Boron Nitride,” Proceedings of 2nd National Symposium on Non-ferrous Alloys, May 9-11 2000, Kerman Iran.

62. S. Nasrazadani , (2000) “Corrosion Resistance Evaluation of Cr, Al Doped Magnetite Coatings on a Low Carbon Steel in 0.05M H2SO4 Solution,” Proceedings of International Conference on Metallurgical Coatings and Thin Films, Sponsored by Advanced Surface Engineering Division of American Vacuum Society (AVS), April 10-14 2000, San Diego, CA USA.

1999

63. S. Nasrazadani and M. Khosravy*, (1999) “Characterization of Magnetite Black Coating”, 3rd National Symposium on Surface Science sponsored by Iranian Surface Science and Technology (ISST), October 1999, Tehran Iran.

64. S. Nasrazadani and K. Raeissi*, (1999) “Study of High Temperature Oxidation of Alloy Steels” 2nd National Steel Conference sponsored by Iranian Society of Iron and Steel, April 1999, Isfahan Iran.

1998

23

65. M.A. Taher*, W.F. Schmidt, S. Nasrazadani, H.A. Naseem, W.D. Brown, and A.P. Malshe (1998) “Effect of Methane Concentration on Physical Properties of HFCVD Diamond Coated Cemented Carbide Tool Inserts,” Journal of Materials Science, Vol. 33, No. 1-2, pp. 173-182.

66. S. Nasrazadani , (1998) ”Evaluation of Copper Electroplated Layers on Silicon Wafers,” Proceedings of Sur/Fin ’98, sponsored by American Electroplaters and Surface Finishers (AESF), June 22-26 1998, Minneapolis, MN, USA.

1997

67. S. Nasrazadani (1997) “Application of IR Spectroscopy for Study of Phosphoric and Tannic Acids Interactions with Magnetite, Goethite, and Lepidocrocite,” Corrosion Science, Vol. 39, No. 10-11, pp. 1845-1859.

1996

68. M.A. Taher*, W.F. Schmidt, W.D. Brown, S. Nasrazadani, H.A. Naseem, A.P. Malshe (1996) “Effect of Methane Concentration on Mechanical Properties of HFCVD Diamond Coated Cemented Carbide Tool Inserts,” Surface Coating and Technology, Vol. 86-87.

69. S. Nasrazadani , T.J. Chao* (1996) “Laboratory Evaluation of Ozone as a Scale Inhibitor for Use in Open Recalculating Cooling Systems,” ASHRAE Transactions, Vol 102, part 2, pp. 65-72.

70. S. Nasrazadani, (1996) “Laboratory Evaluation of the Effects of Ozone on Corrosion and Pitting of Engineering Alloys,” Proceedings of the 2nd Arabian Corrosion Conference, October 12-15 1996, Kuwait.

71. M.A. Taher*, J. Shultz, A.P. Malshe, S. Nasrazadani, H.A. Naseem, W.D. Brown, (1996) “Deposition and Stress Measurement of HFCVD Diamond Coating on Tool Inserts,” 4th International Symposium on Diamond Materials, May 21-26 1996, Reno, Nevada USA.

1995

72. W.F. Schmidt, O.H. Zinke, and S. Nasrazadani (1995) ”Characterization of a Crack in an Aluminum Bar Using an AC Magnetic Bridge”, ASTM-STP 1251, pp.147-163, 1995.

73. J. Amighian, M. Mogaffari*, S. Nasrazadani, M. Salehi, (1995) “The Effect of Heat Treatment On Optimization of Magnetic Properties In Ba Ferrite Permanent Magnets,” Heat Treatment and Surface Engineering, IFHT’95, September 1995, Isfahan, Iran.

24

74. Mohammad M. Ranjbaran*, S. Nasrazadani, (1995) ”Experimental Investigation Of Tool Wear Monitoring By Cutting Force Vibration,” Heat Treatment and Surface Engineering, IFHT’95, September 1995, Isfahan, Iran.

1994

75. R.C. Goforth, B. Chandran, R.K. Ulrich, and S. Nasrazadani (1994) “A Comparison of Three Techniques for Measuring Strain at Fracture of Thin Film Materials,” Thin Solid Films, Vol. 250, pp. 151-156.

76. Y. Xin*, B.R. Xu, S. Nasrazadani, W.S. He, D.F. Lu, G.F. Sun, K.W. Wong, and D. Knapp (1994) “A Systematic Study of the Synthesis of Useful Bulk Superconductor,” J. Materials Research, Vol. 9, No. 7, pp. 1672-1677.

77. R.A. Beera*, W.D. Brown, S.S. Ang, H.A. Naseem, A.P. Malshe, R.K. Ulrich, S. Nasrazadani, and R.C. Goforth, (1994) “Diamond-like-Carbon Films Deposited by Low Temperature PECVD,” IESP conference, September 25-28 1994, Atlanta, GA USA.

78. S. Nasrazadani , M.A. Taher*, and Y. Xin* (1994) “The Effects of Ag and Au Addition On the Degradation Process and Microhardness of Thalium Based Supeconductors,”, 123rd TMS Annual Meeting and Exhibition, February 1994, San Francisco, California, USA.

1993

79. S. Nasrazadani and A. Raman (1993) “The Application of Infrared Spectroscopy to the Study of Rust Systems,” Corrosion Science, Vol 34, No. 8, pp. 1355-1365.

80. S. Nasrazadani and A. Raman (1993) “Formation and Transformation of Magnetite (Fe3O4) on Steel Surfaces under Continuous and Cyclic Water Fog Test,” Corrosion-NACE, Vol. 49, No. 4, pp. 294-300.

81. W.A. Luo, Y.Q. Tang, Y.Z. Chen, I.N. Chan, Y.J. Shi, X.C. Wang, M. Young, S. Nasrazadani, Z.Z. Sheng, G.J. Salamo and F.T. Chan (1993) “High Quality Tl2Ba2Ca2Cu3O10 Thin Films Fabricated via Laser Ablation,” Modern Physics Letters B, Vol. 7, No. 1, pp.19-23.

1992

82. Y. Tang*, W. Luo, Z. Chen, S. Nasrazadani, F.T. Chen, G. Salamo, D.O. Pederson, and Z. Sheng (1992) “Fabrication of Superconducting TlSr(Ca,Cr)Cu2O7 Thin Films by Laser Ablation and Thallium Diffusion,”, Japan J. appl. Phys., Vol. 31, pp. 31-32.

83. W. Luo, T. Tang, Y*. Chen, S. Nasrazadan i , M. Young, Z. Sheng, G, Salamo, and F.T. Chan, (1992) “Superconducting Tl-Ba-Ca-Cu-O Thin Films on MgO Substrate,”

25

Proceedings of Beijing International Conference on High Tc Superconductivity ’92, 1992, Beijing China.

1991

84. S. Nasrazadani and A. Raman (1991) “Morphology of Oxide Phases in the Scale Formed on Steels”, Practical Metallography, Vol. 28, pp. 295-304.

85. Y. Xin, Z.Z. Sheng, and S. Nasrazadani (1991) “Comparison of Pb, Pb-Sb, Pb-V, Pb-Mo and Pb-W Substituted Bi-Sr-Ca-Cu-O”, Physica C, Vol. 176, pp. 179-188, 1991.

1990

86. Raman and S. Nasrazadani (1990) “Packing Corrosion in Bridge Structures,” Corrosion, Vol. 46, No. 7, pp. 601-605.

87. Raman, and S. Nasrazadani, (1990) “Corrosion Problems in Some Louisiana Bridges and Suggested Remedies,” CORROSION ’90, paper # 165, April 17-21, 1990, New Orleans, LA USA.

1989

88. Raman, S. Nasrazadani, L. Sharma (1989) “Morphology of Rust Phases Formed on Weathering Steels in Various Laboratory Corrosion Tests”, Metallography, Vol. 22, pp. 79-96.

1987

89. Raman, S. Nasrazadani , L. Sharma, A. Razvan (1987) “Morphology of Rust Phases Formed on Weathering Steels During Outdoor Atmospheric Exposure in Sheltered Location Under Bridges”, Practical Metallography, Vol. 24, pp. 535-548.

90. Raman, S. Nasrazadani, L. Sharma (1987) “Morphology of Rust Phases Formed on Weathering Steels During Outdoor Atmospheric Exposure in Open, Bold Locations,” Practical Metallography, Vol. 24, pp. 577-590.

91. S. Nasrazadani and A.Raman, (1987) “Rusting Characteristics of Weathering Steels, Results from Various Accelerated Laboratory Corrosion Tests,” CORROSION '87, March 9-13, 1987 paper #425 San Francisco CA USA.

PRESENTATIONS:

26

1. S. Nasrazadani , ASHRAE Winter Conference, Seminar 33: Advances in Understanding Heat Exchanger Corrosion, January 23, 2018, Chicago IL.

2. David Ellerbrock and Seifollah Nasrazadani, Update on Development of a New Accelerated Corrosion Test for Aluminum Heat Exchangers - ASHRAE Research Project 1645, 5th International Congress on Aluminum Heat Exchanger Technologies for HVAC&R, May 2017, Düsseldorf/Germany.

3. S. Nasrazadani , ASHRAE Winter Conference, Seminar 16: Heat Exchanger Corrosion: Fundamentals to Application, January 29 2017, Los Vegas NV

4. Meg Mahat, Tae Y. Choi, Seifollah Nasrazadani, and Arup Neogi, (2008) “Dual Pump Femtosecond Laser Induced Plasma”, ASME International Mechanical Engineering Congress & Exposition, October 31-November 6, 2008, Boston, Massachusetts.

5. Chi Yang, S. Nasrazadani, B. Gorman, and M. A. Omary (2005) “Phosphorescent Fibers as Temperature Sensors: Synthesis and Photophysical Studies of a New Cyclic Trinuclear Silver (I) 3-Methyl-5-carboethoxyl Pyrazolate Complex”, UNT 2005.

6. S. Nasrazadani , (2004) “Application of FTIR in the Analysis of Iron Oxides and Oxyhydroxides Formed in PWR Secondary Systems”, 12th Annual Southwest Chemistry Workshop, July 28th-30th 2004, Dallas Texas.

7. J. Stevens, S. Nasrazadani, (2004) “Secondary System Oxide Characterization Study at Comanche Peak”, 12th Annual Southwest Chemistry Workshop, July 28th-30th 2004, Dallas Texas.

8. J. Stevens and S. Nasrazadani, (2004) Secondary System Oxide Characterization Study at Comanche Peak (Follow up Report), EPRI Conference on PWR Plant Chemistry Experience , San Francisco CA, USA, October 12, 2004.

9. S. Nasrazadani , (2004) “Deposition of Cubic Boron Nitride and Diamond Thin Films”, November 19, 2004 Materials Science and Engineering Departmental Seminar.

10. S. Nasrazadani , H. Namduri, B. Fellers, J. Stevens, R. Theimer, (2003) “Application of FTIR in the analysis of Iron Oxides and Hydroxides Formed in PWR Secondary Systems”, EPRI Steam Generation Secondary Side Management Conference, February 10-12 2003 Savannah Georgia, USA. (result of TXU research grant)

11. B. Fellers, J. Stevens, R. Theimer, S. Nasrazadani, H. Namduri, (2003) “Secondary System Oxide Characterization Study at Comanche Peak, EPRI Steam Generation Secondary Side Management Conference, February 10-12 2003 Savannah Georgia, USA. Result of TXU research grant.

12. R. Mirshams, P. Parakala, S. Nasrazadani, and K. Lian, (2003)”On the Effect of Indenters Shape in Nanoindentation”, 132nd Annual International Meeting and Exhibition of TMS, March 2-6 2003, CA USA (poster presentation).

SCHOLARLY/CREATIVE AND RESEARCH ACTIVITY NOT RESULTING IN PUBLICATION OR PUBLIC PRESENTATION:

Technical Reports Submitted to Texas Utilities (All of the following reports are result of TXU research grant.):

27

1. S. Nasrazadani and Haritha Namduri, “Characterization of Iron Oxide Deposits Formed at Comanche Peak Steam Electric Station (CPSES), Final Report for Unit 2 Refueling (March 2005) shutdown, October 2005.

2. S. Nasrazadani and Haritha Namduri, “Characterization of Iron Oxide Deposits Formed at Comanche Peak Steam Electric Station (CPSES), Final Report for Unit 2 Refueling (October 2003) shutdown, May 2004.

3. S. Nasrazadani and Haritha Namduri, “Characterization of Iron Oxide Deposits Formed at Comanche Peak Steam Electric Station (CPSES), Final Report for Unit 1 Refueling (April 2004 shutdown), October 2004.

4. H. Namduri, J. Diaz, and S. Nasrazadani, “FTIR Analysis of Interactions Between FeCl2 and Different Amines”, October 2003.

5. S. Nasrazadani and Haritha Namduri, “Characterization of Iron Oxide Deposits Formed at Comanche Peak Steam Electric Station (CPSES), Final Report for Units 1 and 2 Refueling (RF09) shutdown, December 2002.

28