Note:Liquid Sanitizer

will spray

Gel Sanitizerwill drip

Starting from the base - connect each of the four poles, tightening by hand.

Secure the backing plate to the pole, tightening by hand.

You can only open the dispenser using the security key - keep it safe!Gently insert the key into the top of the dispenser to open the unit. Secure the dispenser through the back of the unit to the backing plateFill the sanitizing liquid cartridge and insert into the dispenser unit

Note: Always check to ensure the rim of the nozzle is above the dispenser mechanism as shown. This is crucial to the proper function of the dispenser.

Locate the battery compartment and insert 4 (BATTERY TYPE) to provide power.

Alternately you can also use the power adaptor which inserts into the input next to the battery compartment.

Secure printing in the sign display by opening the snap frameand then closing the edges of the frame around your printing.Attach the sign display to the top fo the backing plate using

the sign pole and screw, tightening by hand.

Locate the battery compartment and add four 4C batteriesCheck to ensure correct +/- alignment.

Alternately, you can power using the provided power cable inserted into the power input near the battery compartment.

Your Sanitizer Dispenser Stand is now ready to use!

Nozzle

Dispenser Mechanism