secure performance for profitable growth - sandvik … · 2 sandvik mgt drilling ... all products...
TRANSCRIPT
2 Sandvik MGT Drilling
IT’S ALL ABOUT EVERYONE’S HEALTHHelping you to ensure a safer workplace and healthier workforce is of the utmost importance to us. The wellbeing of any person coming into contact with our equipment is paramount. Therefore, we strive to identify and assess potential risk factors that could threaten the health of you and your employees. All products in this catalogue are designed to meet safety requirements.
BE AWARE OF ALL SAFETY PROCEDURESWe ask that you start by obeying all instructions given. Never work under an unsupported roof or close to potential pinch point locations. Beware of the potential hazards of a loose roof and ribs, and scale down roof and ribs prior to bolting. It is important to bolt early in the mining process – as soon as is safely and practically possible. Safe work procedures should incorporate inspection – before the machine operates, and also through regular monitoring based upon mining conditions, safety and hazard management systems. Workers should be provided with safety information, instruction and training on transportation, installation, operational care and disposal of drilling tools.
The mining industry continues to demand even higher levels of safety and productivity. In order to meet these requirements, we work continuously to develop safer products, and to produce comprehensive manuals on the safe and effective use of our products.
DRESS RIGHT FROM HEAD TO TOEYou must wear appropriate personal protective equipment (PPE) at all times. This is what we strongly recommend to help avoid injury:
– Safety helmet – Hearing protection – Safety glasses – Protective, high visibility clothing – Respiratory protection – Safety boots – Any site-specific PPE as required
MAKE A RISK ANALYSIS BEFORE YOU STARTPay attention to safety when planning all of your work. Before you start, always take the time to go through all operations. Identify any potential risks and take appropriate measures to avoid them. If necessary, seek expert advice on how to help minimize risks. Finally, make sure that you have the right resources to perform all tasks in the safest manner possible.
PUTTING YOUR SAFETY FIRST
“TAKE FIVE” TO IDENTIFY HAZARDS A great safety tool to use before you start working is our app “Sandvik Mining Take Five”. The app consists of a simple, step-by-step checklist with five questions that you should ask yourself to identify potential hazards. The app is free to download for smartphones and tablets, both on the App Store and Google Play.
4 Sandvik MGT Drilling
LIFTING PROCEDURESUse the correct safe lifting practices when working with heavy items. Consider your body position, the awkwardness of the item, and its weight. Are two people required for the job, or is a lifting device needed?
STRAPPINGRods are bundled up with strapping. Take extra care when cutting this strapping. Personal injuries can occur in this situation.
INSTALLATION/REPLACING WORN BITSCemented tungsten carbide tipped bits have tough, wear-resistant edges. These can fracture or cause hard objects, such as steel hammers, to chip when struck during the installation or removal process. The use of the correct hand tools is strongly recommended. New bits should be screwed down tightly by hand. Do not use the rotation of the drill rig to install the bits.
EXTENSION DRILLINGExtension drilling poses potential hazards. There is a risk of crush injury during the guidance of one drill rod onto another. Correct uncoupling procedures must be utilized. The use of the correct hand or machine tool to uncouple the bottom rod from the drill string is recommended. Striking or bending the rods to facilitate uncoupling is not permitted.
MESH ENTANGLEMENTTwo wing bits can become entangled in steel mesh. Do not use drill bits and rods as mesh alignment devices. They are only to be used for the intended purposes. Drill bit designs that reduce the risk of mesh entanglement are available.
GRINDINGOur rock tools have drill bits with cemented carbide tips. Cemented carbide is made up of tungsten carbide and cobalt. The grinding of these tips will produce hazardous substances and particles. These can be inhaled, swallowed or come in contact with the skin or eyes. Wear protective gloves, protective clothing and eye protection. In case of inadequate ventilation, wear respiratory protection. Avoid dry grinding in particular.
DEALING WITH WORN PARTSWorn parts should be removed and disposed of appropriately. Your used tools can be recycled. Please contact your local Sandvik Mining representative for support and further information about how to recycle tools.
STORINGAll products should be stored in a dry place and in the original packaging until they are required for use.
HOW TO WORK WITH SAFETY IN MIND
5 Sandvik MGT Drilling
USE – Do not come into contact with any rotating components. This is to reduce the risk of entanglement.
– Personal protective equipment such as eye protection and suitable clothing should be worn around machinery using carbide tipped drill bits.
– The drilling of rock will generate dust. Some dust is hazardous if inhaled. The use of water flushing or vacuum dust collection, and suitable PPE, is recommended.
– Drilling also generates noise. Recommended hearing protection must be worn.
– The drilling of rock, especially pyrites and sandstone, can generate heat that may ignite methane in the mine, which can potentially lead to an explosion. A blocked, blunt, worn, bent, cracked or damaged drill bit or rod can significantly increase the risk of frictional ignition, and must be replaced immediately. In particular, an insufficient supply of cooling water can lead to the ignition of methane. Safe work and operational procedures must include an inspection of the drilling bit and rod before use. Regular monitoring and reviewing should be carried out, based upon mining conditions, mine health and safety management systems requirements, and hazard management plans. Workers must be provided with safety information: instruction and training on transportation, installation, operational care and use, service and maintenance, as well as the removal of drill bits and rods.
– During positioning of the drill bit and rod, prior to drilling, there is a risk that the column strength of the drill rod can be exceeded. This can cause the rod to buckle, and pin a hand against the wall or rig. Approach pressures should be adjusted so that the columnar buckling load of the exposed length of drill rod is not exceeded. During drilling, proper balance between thrust and rotation must be maintained. For each drill rod system, refer to specific technical bulletins for the recommended operational requirements and thrust loading diagrams. A bent or broken rod must not be used.
– During drilling, the rod may be ejected from the drill chuck. Please utilize “twist locking” chucks where available.
– Inspect drill bits and rods before use and at regular intervals. If they are loose, blocked, dull, bent, cracked, burred, or otherwise unsuitable, DO NOT USE THEM! Replace them. Beware of the risk of creating a spark by incorrect removal methods.
– Correct storage of drilling consumables when they are not in use is important. Rods, in particular, can get caught on moving machinery.
6 Sandvik MGT Drilling
Sandvik was founded in 1862 by Göran Fredrik Göransson, who was the first in the world to succeed in using the Bessemer method for steel production on an industrial scale.
TOGETHER WE WILL TAKE YOUR BUSINESS FURTHERFor more than 150 years we have been committed to providing the highest quality products and solutions to the mining industry. Our spirit and business ethics have remained unchanged, and developments in society and the industry have contributed to our innovative solutions.
Today, we continue to conduct business in close cooperation with you and other customers all over the world, with the promise of being a proactive and innovative partner.
We believe that we can make a difference to the successful running of your business. You need to get the best out of your equipment – with no compromise on quality, delivery time or service. As your partners, we will create solutions that make your operations run as effectively as possible.
One thing is certain: our products and solutions will continue to meet the ever-growing needs of the mining industry, and your business.
”Today, the hallmark of great work is innovation and technology.Being second best is not an option for us.”
7 Sandvik MGT Drilling
CONTENTS
DRILL BITS 18
DRILL RODS 26
EXTENSION DRILLING SYSTEMS 30
ACCESSORIES 38
INFORMATION 42
8 Sandvik MGT Drilling
THE SANDVIK GROUPSandvik was established in 1862: today, it is a global industrial group with advanced products and world-leading positions in selected areas. In 2013, we had about 47,000 employees and sales of just over 87 billion SEK in more than 130 countries. Our operations are based on unique expertise in materials technology, and significant insight into customer processes. This combination has provided us with a world-leading position in three primary areas:
– Tools for metal cutting in cemented carbide and high-speed steel as well as components in cemented carbide and other hard materials.
– Rock tools and equipment for the mining and construction industries.
– Products in advanced stainless materials, special alloys, metallic and ceramic resistance materials and process systems.
Our goal is to actively contribute to improving your productivity and, consequently, your profitability. Our products and services provide maximum value to you in terms of performance, quality, speed, safety, flexibility and – not least – total economy. Successful development is a result of our goal-oriented investment in research,
AT YOUR SERVICE, AROUND THE WORLD
“We are a leading global supplier of rock tools and equipment, service and technical solutions for the mining industry. Our offering covers rock drilling, rock cutting, rock crushing, loading and hauling and handling of materials.”
development and quality assurance. We invest over 3 billion SEK annually and have more than 2,700 employees working in these areas. Many of them are specialists with advanced educational backgrounds and skills.
Our long-term and consistent strategy is based on the interaction between a number of strength factors. This includes advanced and customer focused research and development activities, highly value-added products, integrated manufacturing, direct sales to customers, effective logistics systems, financial strength and a strong corporate culture. Additionally, the significance of Sandvik as an advanced knowledge company is becoming increasingly apparent. Information technology is concentrated upon areas that enhance customer benefits, improve productivity and strengthen profitability.
SANDVIK MININGWe are a leading global supplier of rock tools and equipment, services and technical solutions for the mining industry. Our offering covers rock drilling, rock cutting, rock crushing, loading and hauling and handling of materials. Additionally, we offer a complete assortment of rock drilling tools. In fact, we are the only producer of rock drilling tools with in-house steel and cemented carbide research, development and production facilities.
OUR ORGANIZATIONEvery product is preceded by extensive research and development, and backed with application expertise; a worldwide service network, offering on-site service, training and round-the-clock support. We have a tradition of localization and a conviction that there can be no substitute for direct service and direct contact with you. Our service oriented, global organization is well developed and contains more than 3,500 service technicians located strategically around the world.
9 Sandvik MGT Drilling
Our worldwide business activities are conducted via representation in more than 130 countries.
11 Sandvik MGT Drilling
Through close collaboration with our customers, we develop products that are genuinely needed. We also study trends to ascertain what customer needs will be in the future. We are continuously working on unique solutions that help you to improve your productivity and safety.
WHICH INVENTION DO YOU NEED?
“The spirit of innovation and involvement runs through every product.”
We invest over 3 billion SEK each year in research and development: more than 2 700 of our employees are active in this area. We have 8 000 active patents.
Our focus and continual development give you the latest technical solutions for the most demanding rock conditions, and for the most powerful rock tools. Our products undergo extensive laboratory studies and are mercilessly tested in the field. Finally, they are evaluated and refined to provide the highest grade of equipment quality – something that characterizes all of our products.
A spirit of innovation and high involvement runs through every product. It is preceded by our extensive research and development. This is supported by a worldwide service network offering on-site service, training and round-the-clock support. We have technical service specialists strategically located around the world to quickly give you help – whenever you need it.
12 Sandvik MGT Drilling
We are proud to have full control of each process, and the development of proprietary production processes that further enhance our technical capabilities. This extensive work all leads to the development of tools that allow you to successfully master even the toughest of challenges.
With in-house production, research and development for the essential key materials for manufacturing rock drilling tools, we continue to develop products and cemented carbide grades that enhance your operations through superior performance and reduced costs. One of our extensive research projects has resulted in a new generation of carbide grades and larger, stronger, and more stable and efficient tools. We use our own innovative process technique, and completely new raw materials, to produce the latest generation of carbide grades. Thanks to a significantly stronger carbide matrix and a perfect grain size configuration, we are able to deliver superior toughness and high wear temperature resistance to meet the needs of a great number of customer operations.
DRILL BITS – High quality carbide grades developed through years of experience and testing
– High-grade alloy steel bodies manufactured to tight tolerances
– Bits manufactured by highly-trained operators, ensuring the best quality
– High strength brazing using induction heating systems – Safe handling of products through manufacturing and distribution
PRODUCTS FOR YOUR TOUGH CHALLENGES
– Process control ensuring consistent quality – A reduced number of process steps in manufacturing for environmentally friendly production
DRILL RODS – Incorporating high-grade alloy steel – Forged drive ends, for the best material flow and integrity
– CNC machining of threads ensuring the highest tolerances
– Drill rods manufactured by highly trained operators ensuring the best quality
– Heat treatment ensuring the highest strength and integrity of the product
– Straightening and rust protection, processes ensuring the best quality product
DRIVE ENDS (CHUCKS AND ADAPTORS): – Incorporating high-grade alloy steel – Forged drive ends, for the best material flow and integrity
– CNC machining of threads, ensuring the highest tolerances
– Heat treatment, ensuring the highest strength – Straightening and rust protection, processes ensuring the best quality product
By using newly-developed manufacturing techniques, our new generation of cemented carbide has greater density and a more homogenous structure. This has resulted in increased toughness without compromising the exceedingly high wear resistance – making the material stronger, without sacrificing its hardness.
13 Sandvik MGT Drilling
Environmental considerations are crucial in all of our operations, and never more so than when it comes to the recycling of cemented carbide.
The global shortage of raw material has inspired us to create an extensive scrap-recycling program. We recognize today’s increasing environmental concerns and we are the only mining company that recycles both steel and cemented carbide. In fact, we have been collecting and recycling both scrap and discarded drilling consumables for conversion back into basic raw materials for almost 10 years. A large number of customers have joined our recycling program during this period. One major reason for this is that we make it easy for them to recycle, by collecting scrap from their own premises. Our recycling plant in Chiplun, India complies with the most stringent environmental standards, and is certified to the ISO 14001 and OHSAS 18001 (ISO 45001) international standard.
RECYCLING THAT PAYS OFF FOR YOU
WHAT WE OFFER: – Recycling of cemented carbide available worldwide – Sustainable recycling process with low environmental impact
– Cost recovery and reduced waste disposal for you – Money received for worn tools can purchase new inserts or finance new tooling projects
– Consumables and tools from all manufacturers are accepted
– A win-win situation for all
Adopting sustainable business practices and handlingthem in the right way is a foundation that contributesacross the entire business value chain.
The whole supply chain will be improved by incorporatingrecycling into the business process. For instance, ourrecycling process significantly reduces energy consumption and carbon dioxide emissions, thereby reducing environmental impact.
15 Sandvik MGT Drilling
TRANSPORTATION AND STORAGEDuring transportation, bits and cemented carbide components must be carefully packed in order to prevent damage to the cemented carbide. Even though cemented carbide is very resistant to impact against other materials, it is easily damaged by collisions with other components made from the same material.
MACHINE SETTINGS AND PRACTICESCorrect machine settings and good drilling practices are important factors in the service life of your drilling tools. Good management and maintenance also play a crucial role for your productivity and profitability.
PROPER CARE MEANS EFFICIENT OPERATION
16 Sandvik MGT Drilling
Drilling is at the very heart of the mine: it is critical that every consideration is given to using products that ensure high quality and high reliability. Developments in underground mining point towards increased productivity and operator safety, which make drilling performance more important then ever. In this context, our range of drilling tools provides a perfect system. With satisfactory results achieved, it should be seen as your first choice.
REAL POWER WHEN YOU NEED IT THE MOST
DRILL BITSOur drill bits use unique carbide grades developed through years of experience and testing. Drill bit bodies make use of precision hardenedNickel Molybdenum steel and compound curve body designs, in order to maximize both cutting efficiency and excellent removal of cuttings. Our drill bits provide perfect cutting capabilities – for any application, in all drilling conditions.
DRILL RODSOur drill rods are manufactured from high strength alloy steel and are available in either hexagonal or round forms. The drive ends are fully forged, and the drill rods are heat treated for maximum durability and safety.Drill rods are available in varying lengths and designed for use on hydraulic rigs fitted to continuous miners, miner bolters and mobile drill rig machines.
ACCESSORIESWe manufacture and supply a comprehensive range of drilling accessories which are suitable for use in the installation of strata support products. These accessories include special spanners for the safe and efficient installation of rock bolts, and drill chuck extension spanners, which allow you to adapt your existing equipment to the rapidly-changing underground mining environment.
EXTENSION DRILLING SYSTEMSWe manufacture a complete range of extension drilling systems – both conventional, and direct drive. Every part is manufactured from high strength alloy steel and suitable for the installation of secondary support strata control products. Our patented Direct Drive Extension Drilling System is far superior to conventional drilling systems for four important reasons: it’s safer, faster, easier and smarter.
17 Sandvik MGT Drilling
STATE-OF-THE-ART MINER BOLTERSandvik MB series bolter miners are electrically powered, track-mounted continuous mining machines designed to excavate roadways and install roof bolts simultaneously. They are safe, efficient, high-capacity solutions, suitable for rapid entry developments in long wall mining, and full-scale production in room-and-pillar mining. Since the cutter drum is mounted on a hydraulically actuated sliding frame, it is able to sump into the face independently of the mainframe and tracks. Since the roof and rib bolters are mounted on the stationary mainframe, they can be operated throughout the cutting cycle.
FLAMEPROOF MOBILE BOLTERFlameproof (FLP) roof bolters are specifically designed for coal mining applications, to meet special flameproof requirements. We provide FLP 4/6 head mobile bolters, FLP twin boom mobile bolters and long wall face bolters.
With maintenance and LCC in mind, a new roof bolter design provides a new level of serviceability. The roof bolter is designed for strata support and is machine mounted. With features such as stainless steel wear inserts and a fully upgraded drill head, the new roof bolter provides operators with increased reliability and serviceability. Modular and strategic design considerations mean that it is now easier to repair and service drill rig components on site.
18 Sandvik MGT Drilling
Our drill bits are fitted with our own cemented carbide tips, offering superior life and drilling productivity. The bit bodies are manufactured in one-piece cast Nickel Molybdenum steel, and also feature optimized bit design geometry to ensure efficient and consistent drilling performance. The drill bits are available in sizes ranging from 27 mm diameter to 72 mm diameter, to best accommodate the varying requirements of strata support installation in underground coalmines.
EXPLORE SUPERIOR DRILLING PERFORMANCE
19 Sandvik MGT Drilling
DRILL BITSOur drill bits use unique carbide grades developed through years of experience and testing. We use the most appropriate grade in combination with concentric and eccentric geometries, along with positive and negative rake angles, to provide differing drilling capabilities for any application. Drill bit bodies utilise compound curve designs to maximise cutting efficiencies and cuttings removal.
OPERATIONAL REQUIREMENTS: – Drill motor speed ≤ 650 rpm – Flushing water pressure ≤ 25 bar – Rotational torque ≤ 350 Nm
MOST AGGRESSIVE LEAST AGGRESSIVE
THREE GRADES OF TUNGSTEN CARBIDE ARE AVAILABLE:
39 Toughest grade
55 General purpose grade
71 Most wear resistant grade
The last two digits in the part numbers show the tungsten carbide grade.
TWO WING POSITIVE RAKE BIT
TWO WING NEGATIVE RAKE BIT MODIFIED SPADE BIT FULL SPADE BIT
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
20 Sandvik MGT Drilling
FEATURES: – 16 mm thread – Two wing eccentric design in combination with positive cutting rake gives the most aggressive cutting action
– Typically used for fast drilling of soft materials
FEATURES: – 16 mm thread – Two wing eccentric design provides aggressive cutting geometry
– Negative rake gives added cutting edge strength
– First choice general-purpose bit
TWO WING DRILL BITD4MB
TWO WING POSITIVE RAKE DRILL BITD2MB
M16
M16
DIAMETER
DIAMETER
Part Number Cutting Diameter Thread Size
D4MB-1627-2639 27 mm 16 mm
D4MB-1627-2655 27 mm 16 mm
D4MB-1627-2671 27 mm 16 mm
D4MB-1628-2639 28 mm 16 mm
D4MB-1629-2639 29 mm 16 mm
D4MB-1629-2655 29 mm 16 mm
D4MB-1630-2639 30 mm 16 mm
Part Number Cutting Diameter Thread Size
D2MB-1627-9739 27 mm 16 mm
21 Sandvik MGT Drilling
TWO WING DRILL BITD4MB
TWO WING DRILL BITD4MB
FEATURES: – 16 mm thread – Two wing eccentric design provides aggressive cutting geometry
– Negative rake gives added cutting edge strength
– First choice general-purpose bit
FEATURES: – 16 mm thread – Two wing eccentric design provides aggressive cutting geometry
– Negative rake gives added cutting edge strength
– First choice general-purpose bit
M16
M16
DIAMETER
DIAMETER
Part Number Cutting Diameter Thread Size
D4MB-1640-9155 40 mm 16 mm
D4MB-1641-9155 41 mm 16 mm
D4MB-1642-9155 42 mm 16 mm
D4MB-1643-9155 43 mm 16 mm
D4MB-1645-9155 45 mm 16 mm
Part Number Cutting Diameter Thread Size
D4MB-1632-0955 32 mm 16 mm
D4MB-1635-0955 35 mm 16 mm
D4MB-1638-0955 38 mm 16 mm
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
22 Sandvik MGT Drilling
FEATURES: – 16 mm thread – Two wing, negative rake eccentric design ensures efficient cutting
– Tips meet in the middle of the bit to minimize risk of mesh entanglement
FEATURES: – R20 or R22 female rope thread – 2 Wing, negative rake eccentric design ensures efficient cutting
– Hexagonal shaped body assists removal
TWO WING DRILL BITD4RB
TESS TWO WING DRILL BITD4MB
M16
R20/R22
DIAMETER
DIAMETER
Part Number Cutting Diameter Thread Size
D4RB-2042-9155 42 mm R20
D4RB-2045-9155 45 mm R20
D4RB-2242-9155 42 mm R22
D4RB-2245-9155 45 mm R22
Part Number Cutting Diameter Thread Size
D4MB-1627-9255 27 mm 16 mm
D4MB-1628-9255 28 mm 16 mm
23 Sandvik MGT Drilling
FEATURES: – R20 or R22 female rope thread – 2 Wing, negative rake eccentric design ensures efficient cutting
TWO WING DRILL BITD4RB
R20/R22
DIAMETER
Part Number Cutting Diameter Thread Size
D4RB-2052-3255 52 mm R20
D4RB-2055-3255 55 mm R20
D4RB-2252-3255 52 mm R22
D4RB-2255-3255 55 mm R22
FEATURES: – 16 mm thread – Notched tip gives strength of one-piece carbide, plus faster drilling than full spade
– Good general-purpose bit
MODIFIED SPADE DRILL BITD9MB
Part Number Cutting Diameter Thread Size
D9MB-1627-2871 27 mm 16 mm
D9MB-1628-2871 28 mm 16 mm
D9MB-1635-2855 35 mm 16 mm
D9MB-1638-2871 38 mm 16 mmM16
DIAMETER
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
24 Sandvik MGT Drilling
FEATURES: – 5 wing reamer bit – 22 mm female hex mount – Can be used with HR20 and DD20 extension rod systems
IN-LINE REAMEREOTA
Part Number Cutting Diameter Thread Size
E0TA-2240-8139 40 mm —
E0TA-2245-7839 45 mm —
E0TA-2255-0955 55 mm —
DIAMETER
FEATURES: – 16 mm thread – Strongest design roof bit – Typically used in hard drilling conditions
SPADE DRILL BITD9MB
M16
DIAMETER
Part Number Cutting Diameter Thread Size
D9MB-1627-2971 27 mm 16 mm
D9MB-1628-2971 28 mm 16 mm
D9MB-1629-2971 29 mm 16 mm
25 Sandvik MGT Drilling
DIAMETER
FEATURES: – R20 or R22 female rope thread – 3 wing design – Uses standard M16 roof bit as a pilot
3 WING REAMER BITE5RC
Part Number Cutting Diameter Thread Size
E5RC-2055-0955 55 mm R20
E5RC-2064-0955 64 mm R20
E5RC-2255-0955 55 mm R22
E5RC-2264-0955 64 mm R22
E5RC-2272-9155 72 mm R22THREAD
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
Our drill rods are manufactured from high strength alloy steel, and are available in either hexagonal or round form. The drive ends are fully forged and the drill rods heat treated for maximum durability and increased safety.. These drill rods are available in numerous lengths, ranging from 600 mm to 3000 mm, and are suitable for use on hydraulic and pneumatic drill rigs fitted to continuous miners, miner bolters and mobile drill rig machines, as well as on hand-held bolting rigs.
DRILL RODS FOR OPTIMAL DURABILITY AND SAFETY
26 Sandvik MGT Drilling
27 Sandvik MGT Drilling
ROUND DRILL ROD22R / 7
FEATURES: – 22 mm diameter – 25 mm male square drive end × M16 female bit end – 12 mm flushing hole through rod minimizes the risk of blockage
RODS
Part Number Length
22R/7/0600/6 600 mm
22R/7/0900/6 900 mm
22R/7/1250/6 1250 mm
22R/7/1550/6 1550 mm
22R/7/1850/6 1850 mm
22R/7/2150/6 2150 mm
22R/7/2450/6 2450 mm
M16 THREAD
25 mm SQUARE
22 mm
LENGTH
50 mm
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
28 Sandvik MGT Drilling
25 mm SQUARE
22 mm
M16 THREAD
LENGTH
22 mm AF/25 mm AC
HEX DRILL ROD22/7
FEATURES: – 22 mm AF – 25 mm square drive end × M16 female bit end – 6 mm flushing hole through rod
RODS
Part Number Length
22/7/0300/6 300 mm
22/7/0600/6 600 mm
22/7/0900/6 900 mm
22/7/1200/6 1200 mm
22/7/1250/6 1250 mm
22/7/1350/6 1350 mm
22/7/1550/6 1550 mm
22/7/1650/6 1650 mm
22/7/1750/6 1750 mm
22/7/1850/6 1850 mm
22/7/1950/6 1950 mm
22/7/2150/6 2150 mm
22/7/2450/6 2450 mm
22/7/2750/6 2750 mm
50 mm
29 Sandvik MGT Drilling
22 mm
25 mm SQUARE
M16 THREAD
26 mm SCROLL
LENGTH
19 mm CORE DIAMETER
SCROLL ROD19S
FEATURES: – Round drill rod fitted with external scroll for use in soft ground.
– 25 mm square drive end × M16 female bit end
RODS
Part Number Length
19S/7/0600/6 600 mm
19S/7/1250/6 1250 mm
19S/7/1550/6 1550 mm
19S/7/1740/6 1740 mm
19S/7/2150/6 2150 mm
19S/7/2450/6 2450 mm
50 mm
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
We manufacture a genuinely comprehensive range of extension drilling systems, made of high strength alloy steel, and suitable for the installation of secondary support strata control products. Our patented Direct Drive Extension Drilling System, available in the lightweight DD18 and DD20 systems, and the heavy duty DD22 system, offers you increased productivity and safety. Our extension drilling product range includes drill chuck drive adaptors, drill bit adaptors and extension drill rods in varying lengths. The extension drilling systems are used for drilling holes from 27 mm in diameter to 72 mm in diameter.
THE MOST COMPLETE RANGE ON THE MARKET
30 Sandvik MGT Drilling
31 Sandvik MGT Drilling
DIRECT DRIVE DRILLING SYSTEMS
Sandvik’s patented Direct Drive Drilling System is far superior to conventional drilling systems for four main reasons: it’s safer, faster, easier and smarter.
SAFER – No need to uncouple threads by hand when used on most modern drill rigs (“hands-off”)
– No threaded connection close to the chuck and operator
FASTER – Overall cycle times reduced by 40% compared to conventional drilling systems
EASIER – No uncoupling required upon installation of extra rods
– Half the number of coupling operations
SMARTER – Modular chucks with replaceable stainless steel reinforced water seals
– The 22 mm system incorporates a non-return valve, maintaining the water column and allowing faster recommencement of drilling
DIRECT DRIVE DRILLING SYSTEMS
CONVENTIONAL DRILLING SYSTEMS
COUPLING
COUPLING
COUPLING
COUPLING
DRIVE ADAPTORDIRECT DRIVE CHUCK
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
32 Sandvik MGT Drilling
22 mm HEX
EXTENSION DRILLING DIRECT DRIVEDD18 SYSTEM
FEATURES: – Lightweight Direct Drive extension rod system – R18 male/female connections – Suitable for hole diameters from 27 mm to 45 mm
BIT ADAPTORS
Part Number Overall Length Description
DD18F-M16-0150 150 mm Bit adaptor, R18 female × M16 female
DD18F-M16-0350 350 mm Bit adaptor, R18 female × M16 female
DD18F-M16-1000 1000 mm Bit adaptor, R18 female × M16 female
DD18F-M16-2000 2000 mm Bit adaptor, R18 female × M16 female
DD18F-M16-2500 2500 mm Bit adaptor, R18 female × M16 female
RR18F-R20M-0200 200 mm Bit adaptor, R18 female × R20 male
RR18F-R22M-0200 200 mm Bit adaptor, R18 female × R22 male
EXTENSION RODS
Part Number Effective Length Description
DD18MF-1000 1000 mm DD Rod R18 male/female connection
DD18MF-1500 1500 mm DD Rod R18 male/female connection
DD18MF-1905 1905 mm DD Rod R18 male/female connection
DD18MF-2000 2000 mm DD Rod R18 male/female connection
DRIVE ADAPTOR
Part Number Overall Length Description
RR18M-22/7-0150 150 mmDrive adaptor R18 male × 25mm square drive
CHUCK ADAPTOR
Part Number Description
DD18-22/7-22HF 25 mm square drive male × 22 mm female hex connection
EFFECTIVE LENGTH
33 Sandvik MGT Drilling
24 mm HEX
EXTENSION DRILLING DIRECT DRIVEDD20 SYSTEM
FEATURES: – The Direct Drive 20 System can be used as a stand-alone system or with existing R20 extension rods, drive adaptors and bit adaptors
– 24 AF Hex on the male end allows for easy uncoupling – Collared design allows for maximum locking engagement between rods – Collared design allows shielding of the 24 AF Hex to help reduce wear – A large range of effective lengths is available, to suit your drilling needs – Heat treatment process ensures the highest strength and integrity of the product – For use in drilling holes between 27 mm and 55 mm in diameter
BIT ADAPTORS
Part Number Overall Length Description
DD20F-M16-0100 100 mm Bit adaptor R20 female × M16 female
DD20F-M16-1000 1000 mm Bit adaptor R20 female × M16 female
DD20F-M16-1500 1500 mm Bit adaptor R20 female × M16 female
DD20F-M16-2000 2000 mm Bit adaptor R20 female × M16 female
DD20F-1900-SL 1900 mm Bit adaptor R20 female × SL, Vacuum drilling
EXTENSION RODS
Part Number Effective Length Description
DD20MF-0500 500 mm DD rod, R20 male/female connections
DD20MF-1000 1000 mm DD rod, R20 male/female connections
DD20MF-1500 1500 mm DD rod, R20 male/female connections
DD20MF-2000 2000 mm DD rod, R20 male/female connections
DD20MF-2000V 2000 mm DD rod, R20 male/female connections
CHUCK ADAPTOR
Part Number Description
DD20-22/7-24HF 25 mm square drive male × 24 mm female hex connection
DRIVE ADAPTORS
Part Number Overall Length Description
RR20M-22/7-S200 200 mm Drive Adaptor R20 male × 25mm square drive
DD20M-22/7-1000 1000 mmDrive adaptor, R20 male × 25 mm square drive
DD20M-22/7-2150 2150 mmDrive adaptor, R20 male × 25 mm square drive
DD20M-TL2-1000 1000 mm Drive adaptor, R20 male × 28 mm TL2 drive
DD20M-TL2-0300V 300 mmDrive adaptor, R20 male × 28 mm TL2 drive, Vacuum drilling
EFFECTIVE LENGTH
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
34 Sandvik MGT Drilling
FEATURES: – Heavy duty system for hole sizes 42 to 64 mm plus – Non-return valve in each rod, to maintain the water column and enable you to continue drilling faster
– Heat treated threads – R22 male/female connections – R22 male connection allows use of D4RB drill bits for strongest drilling combination
28 mm SQUARE
EXTENSION DRILLING DIRECT DRIVEDD22 SYSTEM
BIT ADAPTORS
Part Number Overall Length Description
RR22F-R20M-0100 100 mmExtension rod adaptor, R22 female × R20 male connections
RR22F-M16-0070 70 mm Bit adaptor R22 female × M16 female
EXTENSION RODS
Part Number Effective Length Description
DD22MF-0300 300 mm DD rod, R22 male/female connections
DD22MF-1000 1000 mm DD rod, R22 male/female connections
DD22MF-1320 1320 mm DD rod, R22 male/female connections
DD22MF-1500 1500 mm DD rod, R22 male/female connections
DD22MF-1650 1650 mm DD rod, R22 male/female connections
DD22MF-1950 1950 mm DD rod, R22 male/female connections
DD22MF-2000 2000 mm DD rod, R22 male/female connections
CHUCK ADAPTOR
Part Number Description
DD22-22/7-28SF 25 mm square drive male × 28 mm female square connection
EFFECTIVE LENGTH
35 Sandvik MGT Drilling
BIT ADAPTORS
Part Number Overall Length Description
RR22F-M16-0070 70 mm Bit adaptor R22 female × M16 female
RR22F-R20M-0100 100 mmExtension rod adaptor R22 female × R20 male connections
EXTENSION RODS
Part Number Effective Length Description
RR22MF-1000 1000 mmRound extension rod, R22 male/female connections
RR22MF-1500 1500 mmRound extension rod, R22 male/female connections
DRIVE ADAPTORS
Part Number Overall Length Description
RR22M-22/6-0200 200 mmDrive adaptor R22 Male × 25 mm square drive, 22 mm round material
HR22M-22/7-0200 200 mmDrive adaptor R22 Male × 25 mm square drive, 22 mm hex material
FEATURES: – Suitable for hole diameters 42 mm to 64 mm – R22 male/female connections
EXTENSION DRILLINGRR22 SYSTEM
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
EFFECTIVE LENGTH
36 Sandvik MGT Drilling
EXTENSION DRILLINGHR20 SYSTEM
FEATURES: – Hex extension drill rod – 22 mm AF – R20 male/female connections – Suitable for hole diameters from 27 mm to 64 mm
BIT ADAPTORS
Part Number Overall Length Description
HR20F-M16-0150 150 mmBit adaptor, R20 female × M16 female, 22 mm hex material
EXTENSION RODS
Part Number Effective Length Description
HR20MF-1000 1000 mm Hex extension rod, R20 male/female
DRIVE ADAPTORS
Part Number Overall Length Description
HR20M-22/7-0350 350 mmDrive adaptor R20 Male × 25 mm square drive, 22 mm hex material
HR20M-22/7-1000 1000 mmDrive adaptor R20 Male × 25 mm square drive, 22 mm hex material
EFFECTIVE LENGTH
37 Sandvik MGT Drilling
FEATURES: – Hex extension drill rod – 22 mm AF – R25 male/female connections – Suitable for hole diameters 45 mm to 72 mm
EXTENSION DRILLINGHR25 SYSTEM
BIT ADAPTORS
Part Number Overall Length Description
RR25F-M16-0070 70 mmBit adaptor, R25 female × M16 female, 32 mm round material
HR25F-M16-1000 1000 mmBit adaptor, R25 female × M16 female, 22 mm hex material
EXTENSION RODS
Part Number Effective Length Description
HR25MF-1000 1000 mm Hex extension rod, R25 male/female
DRIVE ADAPTORS
Part Number Overall Length Description
RR25M-22/7-0200 200 mmDrive adaptor R25 Male × 25 mm square drive
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
EFFECTIVE LENGTH
We manufacture and supply a comprehensive range of drilling accessories suitable for use in the installation of strata support products. Among our accessories you can find special spanners for the safer and efficient installation of rock bolts, as well as drill chuck extension spanners that will allow you to adapt your existing drilling equipment to the quickly-changing underground mining environment. Additionally, our range includes a wide variety of other tools, such as gauges for monitoring the wear rates on specific drilling equipment.
ESSENTIAL PARTS FOR DEMANDING CONDITIONS
38 Sandvik MGT Drilling
39 Sandvik MGT Drilling
ACCESSORIES
EXTENSION SPANNER, 25 MM SQUARE DRIVE MALE × 25 MM SQUARE DRIVE FEMALE, HEAVY DUTY USE
Part Number Length
22/7-MF-0200 200 mm
22/7-MF-0300 300 mm
22/7-MF-0450 450 mm
22/7-MF-0600 600 mm
22/7-MF-0800 800 mm
EXTENSION SPANNER, 25 MM SQUARE DRIVE MALE × 25 MM SQUARE DRIVE FEMALE, NORMAL DUTY USE
Part Number Length
SP/6/16/0300 300 mm
SP/6/16/0450 450 mm
SP/6/16/0600 600 mm
SP/6/16/0800 800 mm
Tools to assist with the installation of strata support products.
LENGTH
LENGTH
EXTENSION SPANNERS
LENGTH
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
40 Sandvik MGT Drilling
ACCESSORIESTools to assist with the installation of strata support products.
Part Number Length
SP/6/1/0300 300 mm
SP/6/1/0450 450 mm
Part Number Length
SP/6/19/0180W 180 mm
SP/6/19/0300W 300 mm
SP/6/19/0450W 450 mm
Part Number Length
SP/6/20/0300W 300 mm
Part Number Length
SP/6/17/0300 300 mm
SP/6/17/0450 450 mm
SP/6/17/0500 500 mm
SP/6/17/0600 600 mm
SP/6/17/1000 1000 mm
Part Number
SP/23/17/0300
SPANNER, HI-TEN SPINBOLT 25 mm square drive × 14 mm internal square drive, 180 mm tail.
SPANNER, MEGABOLT25 mm square drive end × 36 mm AF 35 mm deep socket end, suit Megabolt, c/w flushing hole.
SPANNER, CABLE BOLT25 mm square drive end × 7 strand internal socket end, suit cable bolt, c/w flushing hole, 200 mm tail.
SPANNER, ROOF BOLTPremium hardened steel socket with 25 mm square drive × 36 mm AF socket end. To include water flushing hole, add W to end of part number e.g. “SP/6/17/0300W”.
SPANNER, 3/4" FEMALE SQUARE DRIVESpanner, 3/4" female square drive end × 36 mm AF socket end, 300 mm length.
41 Sandvik MGT Drilling
ACCESSORIESParts to assist with tool and machine maintenance.
Part Number
R20F-NO GO
Part Number
M8A-0022 – for use with DD18 system
M8A-0023 – for use with DD22 system
M8A-0024 – for use with DD20 system
Part Number
M8T-0020
Part Number
M8T-0022
Part Number
M8T-0070
R20F-NO GO GAUGEWear gauge for checking outside diameter of female R20 end of R20 Extension rods.
DIRECT DRIVE CHUCK REPAIR KIT Stainless steel reinforced polyurethane water seal, 4 socket head cap screws with spring washers.
ROOF BIT REMOVAL SPANNERSuitable for use with 27 mm and 28 mm drill bits.
22 HEX ROD SPANNER Suitable for use with 22 mm hex drill rods.
RR20 UNCOUPLING SPANNERSuitable for use with RR20MF extension rods.
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
42 Sandvik MGT Drilling
BUCKLING LOADSThe critical buckling load is shown for each rod section. Euler’s formula is used to calculate the critical buckling load, with a K factor of 0.7 (the drive end is assumed to be fixed and the bit end is assumed to be pinned; this simulates the end conditions when collaring a hole from a rigid machine mounted drill rig).
F=(KL)²π² EI
22R, DD18 AND DD20 DRILL RODS
Cri
tica
l Buc
king
Lo
ad (k
N)
Effective drill string length (m)
70
60
50
40
30
20
10
01 1,5 2 2,5 3
Per (kN) Fixed/Pinned
BUCKLING LOAD OF 22 MM ROUND DRILL RODS
19S DRILL RODS
Effective drill string length (m)
Cri
tica
l Buc
king
Lo
ad (k
N)
80
70
60
50
40
30
20
10
01 1,5 2 2,5 3
Per (kN) Fixed/Pinned
BUCKLING LOAD OF 19 MM ROUND DRILL RODS
43 Sandvik MGT Drilling
22/7, HR20 AND HR25 DRILL RODS
Effective drill string length (m)
Cri
tica
l Buc
king
Lo
ad (k
N)
70
60
50
40
30
20
10
0
1 1,5 2 2,5
3
Per (kN) Fixed/Pinned
BUCKLING LOAD OF 22 MM HEXAGON DRILL RODS
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
44 Sandvik MGT Drilling
RR22 DRILL RODS
Cri
tica
l Buc
king
Lo
ad (k
N)
Effective drill string length (m)
100
90
80
70
60
50
40
30
20
10
01 1,5 2 2,5 3
Per (kN) Fixed/Pinned
BUCKLING LOAD OF 27 MM ROUND DRILL RODS
BUCKLING LOADSThe critical buckling load is shown for each rod section. Euler’s formula is used to calculate the critical buckling load, with a K factor of 0.7 (the drive end is assumed to be fixed and the bit end is assumed to be pinned; this simulates the end conditions when collaring a hole from a rigid machine mounted drill rig).
F=(KL)²π² EI
45 Sandvik MGT Drilling
DD22 DRILL RODS
Cri
tica
l Buc
king
Lo
ad (k
N)
Effective drill string length (m)
100
90
80
70
60
50
40
30
20
10
01 1,5 2 2,5 3
Per (kN) Fixed/Pinned
BUCKLING LOAD OF 32 MM ROUND DRILL RODS
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S
46 Sandvik MGT Drilling
MATERIAL COMPOSITIONMost hardmetal products contain tungsten carbide and cobalt.
ROUTES OF EXPOSUREGrinding or heating hardmetal blanks or hardmetal products will produce dust or fumes containing dangerous substances that can be inhaled or swallowed, or could come in contact with the skin or eyes.
ACUTE TOXICITYThe dust is toxic by inhalation. Inhalation may cause irritation and inflammation in the airways. Skin contact can cause irritation and rashes. Sensitized persons may experience an allergic reaction.
CHRONIC TOXICITYRepeated inhalation of aerosols containing cobalt may cause obstruction in the airways. Prolonged inhalation of increased concentrations may cause lung fibrosis or lung cancer. Cobalt is a potent skin sensitizer. Repeated or prolonged contact can cause sensitization.
CLASSIFICATION – Following hazard classification according to GHS/CLP applies to the hardmetal powder (3%≤Co<10 %):
– Acute Inhalation 3, H331: Toxic if inhaled. – Carcinogenicity 1B, H350i, May cause cancer by inhalation.
IMPORTANT HEALTH AND SAFETY INFORMATION
– Repr. 2, H361f; Suspected of damaging fertility. – STOT RE 1, H372: Causes damage to lungs through prolonged or repeated exposure by inhalation.
– Resp. Sens. 1B, H334 : May cause allergy or asthma symptoms or breathing difficulties if inhaled.
– Skin Sens.1, H317: May cause an allergic skin reaction. – Aquatic Acute 1, H400: Very toxic to aquatic life. – Aquatic Chronic 2, H411: Toxic to aquatic life with long lasting effects.
PRECAUTIONARY STATEMENTS – Do not breathe dust. – Wear protective gloves/protective clothing/eye protection.
– In case of inadequate ventilation wear respiratory protection.
– Avoid release to the environment.
IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: call a poison center or doctor/physician.
47 Sandvik MGT Drilling
NOTES
EX
TE
NS
ION
DR
ILL
ING
SY
ST
EM
SA
CC
ES
SO
RIE
SD
RIL
L B
ITS
INF
OR
MA
TIO
ND
RIL
L R
OD
S