section m spikeshield power quality productsldjqrvwlfv 5hg *uhhq / ... hbl160m120a hbl160m120a ......

M-1www.hubbell-wiring.com Wiring Device-Kellems®

Section MSpikeShield® Power Quality Products

Surge Protection Panels & Wired-In Branch Panels

SNAPConnect® Surge and Isolated Ground Receptacles

SpikeShield® Surge Suppression Plug Strips

Surge Suppression & Isolated Ground Receptacles

Index

Product Page

Surge Protection Devices (SPDs) Introduction . . . . . . . . . . . . . . . . . . . .M-2

Service/Branch Panel Protection 320kA and 160kA Service/Branch Panel Protection . . . . . . . . . . . . . . .M-4

120kA Service/Branch Panel Protection . . . . . . . . . . . . . . . . . . . . . . . .M-5

Wired-In Branch Panel Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-6

Wired-In Surge Arrestors and Protective Devices . . . . . . . . . . . . . . . . .M-7

Surge Protection Plug Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-9

Surge Protection Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-11

SNAPConnect® Tamper-Resistant Surge Protection Receptacles . . . . . M-13

Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-19

Isolated Ground Receptacles Page

SNAPConnect® Isolated Ground Receptacles . . . . . . . . . . . . . . . . . . . M-13

Straight Blade Isolated Ground Receptacles . . . . . . . . . . . . . . . . . . . .M-15

Isolated Ground Twist-Lock® Receptacles . . . . . . . . . . . . . . . . . . . . . .M-18

Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-20

www.hubbell-wiring.comM-2 Wiring Device-Kellems®

The SpikeShield® line of panel surge protection devices offers a broad selection of products to meet the various requirements of industrial, commercial, institutional and residential applications. No other surge suppression

standards set by Hubbell.

Hubbell offers surge protection products which can handle peak amperage capacities of 50kA to 320kA.

The SpikeShield product line also includes a line of panels with replaceable modules. This series features improved performance through the use of a low impedance bus-bar design and easily replaceable bolt-down modules.

The SpikeShield branch panel protection system includes the complete compact and economical 50, 80, 100 and 120kA series product offering.

These wired-in products can protect branch panels, safety switches and load centers. They can be installed as an

the panel. The versatility of the wired-in products allows them to be used on branch panels, as well as main panel protection in smaller commercial facilities.

SpikeShield® Power Quality ProductsSurge Protection Devices (SPDs) Introduction

Panel Protection


Features Benefits

Compact design with Allows installation in areas with space restrictions. Minimizes connecting lead length which bus-bar pathways reduces impedance ensuring improved clamping performance.

Peak amp capacity Protects equipment under the worst electrical conditions.

Bolt-down modules Assures positive connection and allows for easy replacement.

LED and audible alarm Provides visual and audible indication of panel status. Green for operational, red for module failure. status indicator Audible alarm for module failure with silencing.

Sine wave tracking Provides uniform clamping throughout the sine wave.

Note: All panel products are UL Listed to Standard 1449-3rd edition.

SpikeShield® Power Quality Products320kA, 160kA and 120kA Service/Branch Panel ProtectionFeatures and Benefits

Surface mounting

Bolt-down, replaceable modules

NEMA 3R/12 enclosure

Surface mounting

Diagnostics panel

NEMA 3R/12 enclosure

Peak Amp Capacity320kA and 160kA#10 AWG to #2 AWG lug size

Peak Amp Capacity120kA#12 AWG to #2 AWG lug size


SpikeShield® Power Quality Products320kA and 160kA Service/Branch Panel ProtectionOrdering Information and Specifications

Service/Branch Panel Protection 320,000 Peak Amp Capacity (Type 2 SPD)Voltage V AC Con guration Catalog Number With Disconnect Replacement Module

120/208 Wye*1Ph. 3-wire +G HBL3P320A

HBL4P320AHBL6P320AHBL8P320AHBL10P320A

HBL3P320DAHBL4P320DAHBL6P320DAHBL8P320DAHBL10P320DA

HBL160M120AHBL160M120AHBL160M240A & HBL160M120AHBL160M480AHBL160M600A

Service/Branch Panel Protection 160,000 Peak Amp Capacity (Type 2 SPD)

120/208 Wye*1Ph. 3-wire +G HBL3P160A

HBL4P160AHBL6P160AHBL8P160AHBL10P160A

HBL3P160DAHBL4P160DAHBL6P160DAHBL8P160DAHBL10P160DA

HBL160M120AHBL160M120AHBL160M240A & HBL160M120AHBL160M480AHBL160M600A

Note: Units come standard with Surge Counter. *120/208 Wye also applies to 127/220 Wye. **277/480 Wye also applies to 220/380 Wye, 230/400 Wye and 240/415 Wye.

The SpikeShield® service entrance product line includes a line of panels with replaceable modules. This series features improved performance through the use of a low impedance bus-bar design and easily replaceable bolt-down modules.

latest industry approvals and safety ratings.

Voltage Protection Rating (VPR) Catalog Number SCCR In MCOV † L-N L-G N-G L-L

HBL3P320A HBL3P160A HBL4P320A HBL4P160AHBL6P320A HBL6P160AHBL8P320A HBL8P160AHBL10P320A HBL10P160A

SCCR - Short Circuit Current Rating. † MCOV - Maximum Continuous Operating Voltage. In - Nominal discharge current.

HBL4P320A

HBL8P160DA


SpikeShield® Power Quality Products120kA Service/Branch Panel ProtectionOrdering Information and Specifications

Service/Branch Panel Protection 120,000 Peak Amp Capacity (Type 2 SPD)Voltage V AC Con guration Catalog Number Replacement Module

120/208 Wye*1Ph. 3-wire +G HBL3P120B

HBL4P120BHBL6P120BHBL8P120BHBL10P120B

HBL3P120BM HBL4P120BMHBL6P120BMHBL8P120BMHBL10P120BM

Note: Units come standard with Surge Counter. *120/208 Wye also applies to 127/220 Wye. **277/480 Wye also applies to 220/380 Wye, 230/400 Wye and 240/415 Wye.

The SpikeShield® 120kA branch panel product offering features an economical, compact, modular design.

These wired-in products can protect branch panels, safety switches and load centers. They can be

wired-in products allows them to be used on branch panels, as well as main panel protection found in smaller commercial facilities or residential applications.

HBL8P120B


HBL3P120B HBL4P120BHBL6P120BHBL8P120BHBL10P120BNote: SCCR - Short Circuit Current Rating.

† MCOV - Maximum Continuous Operating Voltage. In - Nominal discharge current.


HBL9W100C

SpikeShield® Power Quality ProductsWired-In Branch Panel Protection100,000 Peak Amperage Capacity

The wired-in surge protection device brick design is ideal for areas where space is a major consideration. The surge unit can be mounted directly to the panel through a chase nipple connection which will reduce lead length and impedance while increasing protection levels.

and a 200kA SCCR rating.

They SpikeShield wired-in surge protective devices

Wired-In Branch Panel Protection 100,000 Peak Amp Capacity (Type 2 SPD)Service Voltage V AC Con guration Catalog Number

120/208 Wye*

600 Delta

1Ph. 3-wire +G

3Ph. Delta 3-wire Corner Gnd



HBL3W100CHBL4W100CHBL5W100CHBL6W100CHBL8W100CHBL9W100CHBL10W100CHBL11W100C

Note: *120/208 Wye also applies to 127/220 Wye. **277/480 Wye also applies to 220/380 Wye, 230/400 Wye and 240/415 Wye. Also can be used on ungrounded systems.


HBL3W100C HBL4W100CHBL5W100C 200kA 20kA 300 N/A N/A N/A 1500HBL6W100CHBL8W100CHBL9W100CHBL10W100CHBL11W100C



SpikeShield® Power Quality ProductsWired-In Surge Arrestors and Protective Devices36,000, 40,000 and 50,000 Peak Amperage Capacity

Surge Arrestors are a low cost solution that may be installed on the line side or load side of the service entrance. These are also

an important variable.

protective devices feature a compact design,

listed.

Wired-In Surge Protective Devices 50,000 Peak Amp Capacity (Type 1 SPD)Service Voltage V AC Con guration Peak Amp Capacity Mounting Means Catalog Number

1Ph. 3-wire + G 50kA Side Nipple Mount HBL3W50

Wired-In Surge Arrestors, Single Phase 36,000 and Three Phase 40,000 (Type 1 / Type 2 SPD) Service Voltage V AC Con guration Peak Amp Capacity Mounting Means Catalog Number

1Ph. 3-wire 36kA Back Nipple MountBack Nipple Mount

HBLSDSA36HBLSDSA40


HBLSDSA36 HBLSDSA40 HBL3W50HBL3W120


HBL3W50

HBLSDSA36

HBLSDSA40


SpikeShield® Power Quality ProductsSurge Protection Plug StripsFeatures and Benefits

HBL7PS1050A$5,000 down-line warranty, tamper-resistant shutters.

HBL8ESPS1050M foot cord, energy saving unit with master/slave set up. Turns power off to peripherals when item plugged into master is powered off.

HBL4PS1050USB SPD features a black housing, 6 foot cord,

smart phones and other electronic devices.

HBL8PS350YLhousing, 350 joules, 6 foot cord, wire management feature, $2,500 down-line warranty.

UL 1449 3rd Edition

Energy

Saving


HBL8PS350YL

SpikeShield® Power Quality ProductsSurge Protection Plug Strips15 Ampere, 125 Volts 50/60Hz

SpikeShield® Surge Protective DevicesPlug-in Style Surge Outlets

Description# of

OutletsJoule Rating

Peak AMP Rating

Cord Length Color Warranty Catalog Number

Single outlet plug-in SPD 1 13.5kA N/A Off. White N/A HBL1PI750

Single outlet plug-in SPD w/phone line protection

1 13.5kA N/A Off. White N/A HBL1PI750M

Single outlet plug-in SPD w/CATV protection

1 13.5kA N/A Off. White N/A HBL1PI750C

Three outlet plug-in SPD 3 13.5kA N/A Off. White N/A HBL3PI750

HBL6PS350YL

HBL6PS350A

HBL8PS2100MA

HBL6MPS

HBL8ESPS1050M

HBL6PS

SpikeShield® Surge Protection Plug StripsMetallic Strips

Description# of

OutletsJoule Rating

Peak AMP Rating

Cord Length Color

Down Line Warranty Catalog Number

Metal Power Strip 6 N/A N/A 6' Off. White N/A HBL6MPS

Metal SPD 6 1050 6' Off. White $2,500 HBL6MPS1050

SPD w/Wire Management 6 350 6.5kA 6' $2,500 HBL6PS350YL

SPD w/Wire Management 8 350 6.5kA 6' $2,500 HBL8PS350YL

Heavy Duty SPD w/HBL5252BK Receptacles

6 30kA 6' Black N/A HBL6PS

Heavy Duty SPD w/HBL8200HW Receptacles

6 30kA 6' Black N/A HBL6PSHG

Tamper-Resistant Non-Metallic Strips

Description# of

OutletsJoule Rating

Peak AMP Rating

Cord Length Color


Power Strip 6 N/A N/A 6' Off. White N/A HBL6PPS

SPD 6 350 6.5kA 6' Off. White $2,500 HBL6PS350A



6 1050 6' Off. White $2,500 HBL6PS1050MA

SPD 1050 6' Off. White $10,000 HBL7PS1050A

1050 6' Off. White $10,000 HBL7PS1050MA

SPD 1050 15' Off. White $10,000 HBL7PS105015A

8 2100 6' Off. White $25,000 HBL8PS2100MA

8 2100 6' Off. White $25,000 HBL8PS2100DA

Specialty Non-Metallic Surge Strips

Description# of

OutletsJoule Rating

Peak AMP Rating

Cord Length Color


1050 6' Black $10,000 HBL4PS1050USB*

Remote Switch SPD w/One Keychain Ring Control

6 2100 6' Off. White $25,000 HBL6RSPS2100

Energy Saving SPD w/Master/ 8 1050 6' Off. White $10,000 HBL8ESPS1050M

Energy Saving SPD Master/ Controlled Design w/CATV Protection

8 1050 6' Off. White $10,000 HBL8ESPS1050C

Note: See page Tech-10 for Tamper-Resistant description. *With 90 Angle Plug.

UL 1449 3rd Edition

HBL1PI750C HBL3PI750

HBL1PI750MHBL1PI750

HBL6RSPS2100


SpikeShield® Power Quality ProductsSurge Protection ReceptaclesFeatures and Benefits

Note: The effectiveness of SPD devices diminishes with the increase in distance between the device and the equipment to be protected.

Damage-alert alarm sounds when surge protection is no longer functioning and keeps sounding until the receptacle is replaced or muting screw is utilized

Muting screw allows damage- alert alarm to be silenced until device is replaced

Power-on indicator light verifies instantly that power is available at the receptacle and the suppression

flashing light indicates surge protection circuitry has been damaged

Distinctive surge symbol provides quick visual identification of surge suppression receptacle. High-impact nylon face resists breakage

Automatic self-grounding staple attached to bridge meets NEC® requirements

IG8362SA

Hubbell has the broadest offering of SPD receptacles in the industry with technology that is unsurpassed. Inside Hubbell SPD receptacles are two 22mm square MOVs

The nylon component shield protects the printed circuit

board from moisture and contaminants. An all-glass PC board provides superior moisture immunity for longer life in humid environments. Conformal coating is provided on the printed circuit board for additional moisture immunity.

Surge Protection Receptacles

NEC® is a registered trademark of the National Fire Protection Association (NFPA).


Dimensions in Inches (mm)

4.30" sq.(109.2)

3.02" (76.7)3.38" (85.9)

.92"(23.4)

.1"(2.5)

HBL415S

1.23"(31.2)

1.13"(28.7)

1.30"(33.0)

3.28"(83.3) 2.62"

(66.5)

1.75"(44.5)

HBL8362ISA

1.23"(31.2)

1.13"(28.7)

1.30"(33.0)

3.28"(83.3) 2.62"

(66.5)

1.75"(44.5)

HBL5262GYSA

1.23"(31.2)

1.13"(28.7)

1.30"(33.0)

3.28"(83.3) 2.62"

(66.5)

1.75"(44.5)

IG5362SA

20A 125VNEMA 5-20R

UL CSA

G

W

15A 125VNEMA 5-15R

UL CSA

G

W

Circuit Guard®, Specification Grade Duplex ReceptaclesDescription Color Catalog Number

Surge suppression receptacles with BlueIvoryOffice WhiteWhite

HBL5260SAHBL5260ISAHBL5260OWSAHBL5260WSA

HBL5360SAHBL5360ISAHBL5360OWSAHBL5360WSA

Surge suppression receptacles with

per mode.

AlmondBlueGrayIvoryOffice WhiteWhite

HBL5262ALSAHBL5262SAHBL5262GYSAHBL5262ISAHBL5262OWSAHBL5262WSA

HBL5362ALSAHBL5362SAHBL5362GYSAHBL5362ISAHBL5362OWSAHBL5362WSA

Isolated ground, surge suppression receptacles with light and alarm,

BlueGrayIvoryOffice WhiteOrangeWhite

IG5262SAIG5262GYSAIG5262ISAIG5262OWSAIG5262OSAIG5262WSA

IG5362SAIG5362GYSAIG5362ISAIG5362OWSAIG5362OSAIG5362WSA

® surge suppression receptacleswith lights. 80 joules/6500A per mode.

BlueIvory

HBL415SHBL415IS

HBL420SHBL420IS

Circuit Guard®, Hospital Grade Duplex ReceptaclesDescription Color Catalog Number

Surge suppression receptacles with

per mode.

AlmondBlueGrayIvoryRedWhite

HBL8262ALSAHBL8262SAHBL8262GYSAHBL8262ISAHBL8262RSAHBL8262WSA

HBL8362ALSAHBL8362SAHBL8362GYSAHBL8362ISAHBL8362RSAHBL8362WSA

Isolated ground, surge suppression receptacles with light and alarm,

BlueGrayIvoryOrangeRedWhite

IG8262SAIG8262GYSAIG8262ISAIG8262OSAIG8262RSAIG8262WSA

IG8362SAIG8362GYSAIG8362ISAIG8362OSAIG8362RSAIG8362WSA

with lights, 80 joules/6500A per mode.BlueIvoryRed

———

HBL420HSHBL420HISHBL420HRS

4-PLEX® AccessoriesDescription Color Catalog Number

BlueIvoryRed

HBL4APBLHBL4APIHBL4APR

Ivory HBL4PBI

Note: 4-PLEX box is not UL Listed.

Wallplates (Sold Separately)

Note: *Premarked “COMPUTER ONLY.” Lettering is block ¼" high. **Premarked “ISOLATED GROUND.” Lettering is block ¼" high.

Jumbo size plate. See section N for additional wallplates. See page M-19 for technical information.

SpikeShield® Power Quality ProductsSurge Protection Receptacles15 and 20 Ampere, 125 Volts AC 60 Hz

Con gurationHigh-Impact Nylon

Plated SteelStainless Steel (S/S)

BrassColor Standard Mid-Size

1-Gang

AlmondBlue BlueGrayIvoryIvoryOff. WhiteOrangeRedWhite

NP26AL – –NP26GY –NP26INP26OWNP26OIG**NP26RNP26W

NPJ26ALNPJ26CBL* NPJ26BLNPJ26GY NPJ26C*NPJ26INPJ26OW –NPJ26RNPJ26W

ChromeBrass Plated

SCH26SBP26

Smooth S/SSmooth S/SSmooth Brass

SS26SSJ26SB26


SpikeShield® Power Quality ProductsSNAPConnect® Surge Protection and Isolated Ground Receptacles Heavy Duty Specification Grade

Immediate Benefits!Project Timing

Save ime and Money

Consistent Installation

Meet Job Deadlines

In-Use

Flush Appearance

Simple Replacement

Shallow Bo Depth

No Stripping

No Looping/No ape

No posed erminals

Isolated Ground ReceptaclesSNAPConnect® Isolated Ground devices provide a clean ground path for sensitive equipment. Devices come with power indication, tamper-resistant or a combination of both.

Surge Suppression ReceptaclesSpikeShield® SNAPConnect® tamper-resistant surge receptacles

loads from every day power spikes and surges.


2.62"(66.5)

1.75"(44.3)

3.31"(84.0)

SNAP5262S

1.33"(33.8)

2.62"(66.5)

1.64"(41.7)

3.28"(83.3)

SNAP2182RIGTR

.86"(21.9)

2.62"(66.5)

1.64"(41.7)

3.28"(83.3)

SNAP5362IGL

.86"(21.9)

2.62"(66.5)

1.64"(41.7)

3.28"(83.3)

SNAP8300RIGLTR

.86"(21.9)

.78"(19.8) 1.48"

(37.6)

.63"(16.0)

SNAP1RA

SpikeShield® Power Quality ProductsSNAPConnect® Surge Protection and Isolated Ground Receptacles Heavy Duty Specification Grade

SNAPConnect® Tamper-Resistant Surge Protection Receptacle with Power Indicating LED Description Color Catalog Number

Hospital Grade SNAPConnect® Tamper-Resistant, surge supression

BlueGrayIvoryLight AlmondRedWhite

SNAP8262SSNAP8262GYSSNAP8262ISSNAP8262LASSNAP8262RSSNAP8262WS

SNAP8362SSNAP8362GYSSNAP8362ISSNAP8362LASSNAP8362RSSNAP8362WS

Commercial Grade SNAPConnect® Tamper-Resistant, surge supression

BlueGrayIvoryLight AlmondWhite

SNAP5262SSNAP5262GYSSNAP5262ISSNAP5262LASSNAP5262WS

SNAP5362SSNAP5362GYSSNAP5362ISSNAP5362LASSNAP5362WS

SNAPConnect® Tamper-Resistant Isolated Ground Receptacle Description Color Catalog Number

Hospital Grade SNAPConnect® Tamper- OrangeRed

SNAP8200IGTRSNAP8200RIGTR


Hospital Grade Style Line® decorator SNAPConnect® Tamper-Resistant,

OrangeRed



Commercial Grade, isolated ground Orange SNAP5262IGTR SNAP5362IGTR

Style Line® Decorator Orange SNAP2152IGTR SNAP2162IGTR

SNAPConnect® Isolated Ground Receptacle with Power Indicating LEDDescription Color Catalog Number

Hospital Grade SNAPConnect® Tamper-Resistant, isolated ground,

OrangeRed

SNAP8200IGLSNAP8200RIGL


Hospital Grade Style Line® decorator SNAPConnect® Tamper-Resistant,

OrangeRed



Commercial Grade, isolated ground Orange SNAP5262IGL SNAP5362IGL

Style Line® Decorator Orange SNAP2152IGL SNAP2162IGL

SNAPConnect® Tamper-Resistant Isolated Ground Receptacle with Power Indicating LEDDescription Color Catalog Number

Hospital Grade SNAPConnect® Tamper- OrangeRed

SNAP8200IGLTRSNAP8200RIGLTR


Commercial GradeStyle Line® decorator

OrangeRed



Commercial Grade, isolated ground Orange SNAP5262IGLTR SNAP5362IGLTR

Style Line® decorator Orange SNAP2152IGLTR SNAP2162IGLTR

20A 125VNEMA 5-20R

UL CSA

G

W

15A 125VNEMA 5-15R

UL CSA

G

W

SNAPConnect® Right Angle Pigtailed Connector for General UseDescription Solid Wire Stranded Wire

Clear right angle terminal with 6 inch leads #12 AWG THHN/ THWN-2, 600V, Polycarbonate housing material

SNAP1RA SNAP2RA

Note: See page Tech-10 for Power Indicating and Tamper-Resistant descriptions. See page M-19 for SNAPConnect® technical information.



receptacle. Today – when a clean, noise-free ground is more important than ever – Hubbell is still setting the standard.

Hubbell uses insulation barrier construction on many models to isolate the ground contacts from the mounting strap. The green grounding screw is connected directly to the grounding contacts. In this way, ground contacts are separated from the mounting strap and also from the conventional grounding system. The isolated ground circuit is completed by running a dedicated insulated ground wire from the system ground buss to the green grounding screw.

60 different type receptacles.

panels...almost anywhere.

toughest standard of all...the Hubbell standard

IG triangle on the face of the receptacle clearly indicates isolated ground device.

SpikeShield® Power Quality ProductsStraight Blade Isolated Ground ReceptaclesFeatures and Benefits

Isolated Ground Receptacles, A “Clean” Path Provides A “Clean” Ground For Sensitive Equipment

Wrap-around, locked on brass mounting strap provides additional support strength for receptacle assembly

Green grounding screw connected directly to the grounding contacts

Insulation barrier construction — first patented by Hubbell — isolates ground contacts from the mounting strap

Back and side wiring capability provides easy installation with stranded or solid wire

Dimensionally stable, reinforced thermoplastic polyester provides impact strength in addition to heat and flame resistance

Automatic self-grounding clip assures ground continuity between

Straight blade 15A and 20A, 125V

a variety of colors Amperage and voltage clearly indicated Impact-resistant nylon face

IG5262


3.28"(83.3)

.80"(20.3)

1.33"(33.8)

2.73"(69.3)

IG8200

CR5252IG

1.33"(33.8)

3.28"(83.3)

2.73"(69.3)

1.05"(26.7)

.80"(20.3)

IG5262

1.33"(33.8)

.80"(20.3)

3.28"(83.3)

2.73"(69.3)

4.30" sq.(109.2)

3.02"(76.7)

3.38" (85.9)

.92"(23.4)

.1"(2.5)

IG415

15A and 20A, 125V HBL® Extra Heavy Duty, Specification Grade, Isolated Ground ReceptaclesDescription Color Catalog Number

back and side wired, multiple drive screws.

Orange Gray Ivory RedWhite

IG5262 IG5262GY IG5262I IG5262R —

IG5362 IG5362GY IG5362I IG5362R IG5362W

isolated ground.

Orange Gray Ivory Red White

IG5262WR IG5262GYWR IG5262IWR IG5262RWR —

IG5362WR IG5362GYWR IG5362IWR IG5362RWR IG5362WWR

back and side wired.

Orange Black Blue Gray Ivory Office White White

CR5252IG CR5252IGBK — CR5252IGGY CR5252IGI CR5252IGOW CR5252IGW

CR5352IG CR5352IGBK CR5352IGBL CR5352IGGY CR5352IGI CR5352IGOW CR5352IGW

Style Line® decorator, flush, nylon face, back and side wired.

Orange Gray

IG2152 —

IG2162 IG2162GY

® receptacle. Orange IG415 IG420*

Flush, nylon face, single, back and side wired.

Orange IG5261 IG5361

Weather Resistant, single, Isolated ground.

Orange IG5261WR IG5361WR

Note: *Not Fed. Spec. Listed. See page Tech-10 for Weather Resistant description. See page M-20 for isolated ground technical information. See page A-46 and A-47 for accessories. See page A-23 for 4-PLEX accessories.

SpikeShield® Power Quality ProductsStraight Blade Isolated Ground ReceptaclesOrdering Information

Hospital Grade , HBL® Extra Heavy Duty,Isolated Ground ReceptaclesDescription Color Catalog Number

Flush, thermoplastic polyester face,

multiple drive screws.

Orange Red

IG8200 IG8200R

IG8300 IG8300R

Style Line® decorator. Orange Ivory White

— — —

IG2182 IG2182I IG2182WA

Flush, thermoplastic polyester face, single. Orange IG8210 IG8310

15A 125VNEMA 5-15R

UL CSA0.5 HP

20A 125VNEMA 5-20R

UL CSA1 HP

15A 125VNEMA 5-15R

UL CSA0.5 HP

20A 125VNEMA 5-20R

UL CSA1 HP



IG9308

2.25"(57.15)

3.68(93.5)

3.28"(85.3)

1.81"(46.0)

3.28"(83.3)

.83"(21.1)

1.32"(33.6)

2.73"(69.3)

IG5352

1.57"(39.9)

3.28"(83.3)

.83"(21.1)

1.32"(33.6)

2.73"(69.3)

IG20CR

1.57"(39.9)

3.28"(83.3)

.83"(21.1)

1.30"(32.9)

2.73"(69.3)

IG20DR

1.57"(39.9)

SpikeShield® Power Quality ProductsStraight Blade Isolated Ground ReceptaclesOrdering Information

IP20SUITABILITY

30A, 125V and 250V Isolated Ground ReceptaclesDescription Color Catalog Number

Single receptacle, 2 pole, 3 wire grounding.


Note: See page M-20 for isolated ground technical information.

30A 125VNEMA 5-30R

UL CSA2 HP

G

W

30A 250VNEMA 6-30R

UL CSA2 HP

G

Hubbell-PRO Heavy Duty Specification Grade

Description Color Catalog Number


OrangeAlmondGrayIvoryLight AlmondWhite

IG5252IG5252ALIG5252GYIG5252IIG5252LAIG5252W

IG5352IG5352ALIG5352GYIG5352IIG5352LAIG5352W

Tamper-Resistant,


OrangeIvoryWhite

IG5252TRIG5252ITRIG5252WTR

IG5352TRIG5352ITRIG5352WTR

Note: See page Tech-10 for Tamper-Resistant description.

Commercial Specification Grade

Description Color Catalog Number

side wired.


IG15CRIG15CRALIG15CRGRYIG15CRIIG15CRLAIG15CRWHI

IG20CRIG20CRALIG20CRGRYIG20CRIIG20CRLAIG20CRWHI

Style Line®

side wired.


IG15DRIG15DRALIG15DRGRYIG15DRIIG15DRLAIG15DRWHI

IG20DRIG20DRALIG20DRGRYIG20DRIIG20DRLAIG20DRWHI

15A 125VNEMA 5-15R

UL CSA0.5 HP

20A 125VNEMA 5-20R

UL CSA1 HP

15A and 20A, 250V HBL® Extra Heavy Duty, Specification Grade, Isolated Ground ReceptaclesDescription Color Catalog Number

back and side wired, multiple drive screws.


Flush, nylon face, single. Orange IG5661 IG5461

G

15A 250VNEMA 6-15R

UL CSA1.5 HP

G

20A 250VNEMA 6-20R

UL CSA2 HP


Face color-coding by voltage facilitates locating and mating of proper devices.

125V AC 250V AC 480V AC 125/250V AC

SpikeShield® Power Quality ProductsIsolated Ground Twist-Lock® ReceptaclesFeatures and Benefits

Insulation barrier construction first patented by Hubbell isolates ground contact from the mounting strap Wire restraint recess for both back and side wiring reduces terminal loosening Glass-filled thermoplastic polyester base is heat and impact resistant, providing dimensional stability and strength One-piece contact with long

stress and overheating #10 silicon bronze terminal

strength and resistance to corrosion and stripping Accommodates both back and side wiring

inspection of terminations

All-brass mounting and grounding system provides a low resistance ground path High-impact, abuse-resistant nylon face Color-coding by voltage rating helps ensure mating of proper devices

20 and 30A devices, simplifying installation Automatic self-grounding clip assures ground continuity between mounting strap and

IG2310


IG4700A

1.70"(43.2)

.95"(24.1)

3.28"(83.3)

2.73"(69.5)

2.38"(60.5)1.38"

(35.1)

3.28"(83.3)

1.27"(32.3)

IG4710

IG2310

1.56"(39.6)

2.38"(60.5)

3.28"(83.3)

#6-32 TAP

2.67"(67.8)

1.23"(31.2)

1.70"(43.2)

.98"(24.9)

SpikeShield® Power Quality ProductsIsolated Ground Twist-Lock® ReceptaclesOrdering Information

15A, 125V and 250V Back and Side WiredDescription Poles/Wires Color Catalog Number

2 pole, 3 wire Orange IG4700A* IG4550A*

Flush, RTP face, single. 2 pole, 3 wire Orange IG4710 IG4560

Note: RTP is an abbreviation for reinforced thermoplastic polyester. *Supplied with break-off tabs for split circuit wiring.

20A, 125V, 250V and 480V AC Back and Side WiredDescription Poles/Wires Color Catalog Number

Flush, nylon face, single. 2 pole, 3 wire Orange IG2310 IG2320 IG2340

30A, 125V and 250V Back and Side WiredDescription Poles/Wires Color Catalog Number

Flush, nylon face, single. 2 pole, 3 wire Orange IG2610 IG2620

20A, 125V/250V and 3Ø 250V AC Back and Side WiredDescription Poles/Wires Color Catalog Number


30A, 125V/250V and 3Ø 250V AC Back and Side WiredDescription Poles/Wires Color Catalog Number


20A and 30A, 3ØY 120/208V AC Back and Side WiredDescription Poles/Wires Color Catalog Number


Note: See page M-20 for isolated ground technical information.

15A 125VNEMA L5-15R

UL/CSA

GW

15A 250VNEMA L6-15R

UL/CSA

GX

Y

20A 125VNEMA L5-20R

UL/CSA1 HP

G

W

20A 250VNEMA L6-20R

UL/CSA2 HP

G

X

Y

20A 480V ACNEMA L8-20R

UL/CSA3 HP

G

X

Y

30A 125VNEMA L5-30R

UL/CSA2 HP

G

W

30A 250VNEMA L6-30R

UL/CSA2 HP

G

X

Y

20A 125/250V ACNEMA L14-20R

UL/CSA2 (1) HP

G W

X

Y

20A 3Ø 250V ACNEMA L15-20R

UL/CSA3 HP

G Y

X

Z

30A 125/250V ACNEMA L14-30R

UL/CSA2 (2) HP

G W

X

Y

30A 3Ø 250V ACNEMA L15-30R

UL/CSA3 HP

G Y

X

Z

20A 3ØY120/208V ACNEMA L21-20R

UL/CSA2 HP

W Y

X

Z

G

30A 3ØY120/208V ACNEMA L21-30R

UL/CSA3 HP

W Y

X

Z

G


SpikeShield® Power Quality ProductsSurge Protection Device SpecificationsTechnical Information

SpikeShield® Surge Protection Plug StripsPS350 Series MPS1050 Series PS350YL Series PS1050 Series PS2100 Series 6PS Series HBLCA C

130 130 130 130 130 130

Operating Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz

6.5kA 6.5kA 30.0kA 200

Operating Temperature °F to 160° ° °

Performance500V

EMI/RFI Noise Rejection n/a n/a n/a -20dB -20dB -20dB n/a

WarrantyDownline Warranty $2,500 $2,500 $2,500 $25,000 None None

Housing Type ABS Metal Metal ABS ABS Metal ABS

Color Off. White Off. White version is Black

Off. White Black Off. White

Dimensions Length Width Height

HBL6MPS Series

HBL8ESPS Series

HBL6RSPS Series

Surge Protection ReceptaclesDescription Part Duple / SNAPConnect® 4-PL ®

Type – 2 Pole, 3 Wire, Grounding Receptacle 15A/20A 15A/20ATop Nylon ®

Base Nylon ®

Power Contact Contact Design Tandem Modified Bypass Triple Wipe

Rating – 15A, 125V AC/20A, 125V AC Mounting Strap –Clamping Plate

Terminal Screws Brass #8-32Grounding Screw Automatic Self-Grounding Clip Stainless Steel Mounting Screws BrassLED Green GreenAlarm Muting Screw Nylon –

Performancelectrical Duple / SNAPConnect® 4-PL ®

Frequency 60Hz 60HzVoltage 120V AC + 10%–15% 20V AC + 10%–15%Response TimeProtection Modes Normal and Common Modes Normal and Common Modes Transient Suppression

15000A 80 joules 6500A 15000A 80 joules 6500A

600 L-N, 600 L-G 1000 N-G 600 L-N, 600 L-GEMI/RFI Attenuation at 50 Ohms Normal Mode Operating Temperature Flammability


SpecificationsReceptacle Part Description

Catalog Number – IG5352, IG15CR, IG15DR

Type – 2 Pole, 3 Wire, GroundingRating – 15A, 125V

ReceptacleTopBasePower ContactsTerminal ClampGrounding ScrewMounting StrapAuto GroundMounting Screws

15ANylonNylon

#8-32 Plated Steel, TriDrive

Stainless Steel

Performancelectrical

Dielectric Voltage

Current InterruptingTemperature Rise

Withstands 2000V Minimum.125V.Certified for current interrupting at full rated current.

at 150% of rated direct current.

Mechanical

Terminal Identification

Terminal AccommodationProduct Identification

Ratings are a permanent part of the device.

nvironmental Material

FlammabilityOperating Temperatures

SpecificationsReceptacle Part Description

Typical Specification – Catalog Number IG5262 Receptacle 15A

Insulator Nylon Terminal Screws Brass #8-32

Center Assembly-Rivet Brass Automatic Self-Grounding Clip Stainless Steel

Note: *Polyethylene Terephthalate Polyester.

Performancelectrical

Dielectric Voltage Withstands 2,000V minimum.

Current Interrupting Certified for current interrupting at full rated current.

of overload at 150% of rated direct current.Mechanical

Product Identification Ratings are permanent part of device.

nvironmental Material

IG5262 IG5352

SpikeShield® Power Quality ProductsIsolated Ground Device SpecificationsTechnical Information

section m spikeshield power quality productsldjqrvwlfv 5hg *uhhq / ... hbl160m120a hbl160m120a ......

Documents