Vacuum-Mount Bike Rackspatent pending

140 MPH

The easiest racks in the world to install - attach or remove in just seconds.Incredibly powerful, lighweight, compact and travel friendly.

Fits on virtually any car with no special adapters!

Check

Out Page 4 ...

Our newest rack is

the Smallest Bike

Rack in the World!

Talon BomberMini

Our most popular model. Single-bike fork-mount rack designed to attach to your roof, trunk or hatchback. Plastic body allows it to flex and conform to the contours of your car. Three 6” SeaSucker vacuum mounts in a triangular pattern give it tremendous holding power and stability. Includes 6” Rear Wheel Strap. ½” black HDPE body for strength and durability. 15”x13” footprint. 4.2 lbs.

Our most versatile model. Two-bike fork-mount rack designed to attach to your car’s roof or trunk, or your SUV’s back glass. Plastic body flexes to conform to your car’s curves. Three 6” SeaSucker vacuum mounts give this rack plenty of muscle. Includes two 6” Rear Wheel Straps. ¾” black HDPE body for strength and durability. 30”x9” footprint. 6.5 lbs.

Bomber Falcon

Our strongest model. Three-bike fork-mount rack designed to attach to your roof or trunk, or your SUV’s back glass. Plastic body flexes just enough to conform to your car’s contours. Five 6” SeaSucker vacuum mounts for maximum holding power. Includes three 6” Rear Wheel Straps. ¾” black HDPE body for strength and durability. 41”x11” footprint. 16 lbs.

Our most cost-effective model. Single-bike fork-mount rack made to attach to the back glass of your pickup truck, even with a bed cover. Two 6” SeaSucker vacuum mounts lock this rack into place. ½” black HDPE body for strength and durability. 13”x6” footprint. 2.75 lbs.

With SeaSucker's new Hornet, traveling

with your bike has never been easier

!

Our Hornet 1-bike rack certainly lives up to its billing as the “Smallest Bike Rack in the World”. It’s so compact that it fits into a 9.5”x7”x2.5” zippered carrying case for easy storage and travel. Designed to mount to the back window of any hatchback, SUV or minivan, the Hornet uses two of SeaSucker’s powerful 4 ½” vacuum cups (120 lbs. of pull-strength - each!) to hold the handlebars and hang the bike from the rear glass. As with all SeaSucker bike racks, the pump-action vacuum cups also allow the user to attach the rack in just seconds, making the Hornet one of the easiest and fastest racks to install. And when it comes time to remove it, the Hornet detaches quickly and breaks down into its component parts for storage in its case. The handlebar mounts open to accommodate both road and mtb bars and are secured with locking pins when in use. The Hornet also comes with a pegged safety strap that threads through the hatchback and around the steer tube.

Hornet

Flight Deck Add-On Wheel Mount

Upgrade the Rear Wheel Strap for the Flight Deck

and you won’t have to carry your front

wheel in

the back seat anymore.

New for 2012!

Elongated entry slots for your skewer allow your wheel to rest on the platform of the rack, providing additional stability when driving. The 1/4” aluminum front wheel mount fits up to a 29” wheel and sits on a black HDPE platform that has a Velrco strap to hold your back tire in place while you drive. Held in place with two powerful 6” SeaSuckers. 13”x6” footprint. 3 lbs.

Made to fit the Mini Bomber and Bomber bike racks - just swap the Wheel Mount for one of the fork mounts, and now your front wheel doesn’t have to ride in the trunk. Elongated entry slots for your skewer allow your wheel to rest on the platform of the rack, providing additional stability when driving. Fits up to 29” wheels. 1/4” aluminum. 1.2 lbs.

New for 2012!

TrikeRack

JetPack

SeaSucker bike racks are made to be easy to remove, so we’ve also invented a way to keep them and your bike secure when you’re not in your car. The Cable Anchor - Window clips over the edge of your window. The Cable Anchor - Trunk fits into the seam between your trunk lid (or door) and your body panel. Both give you a solid anchor point to loop a cable lock through or to lock onto. Made of high-quality polished stainless steel, these little wonders will give you the peace of mind you deserve when you have to leave your bike mounted in your rack.

Our model for the 3-wheel crowd. Two coated steel tire hooks and Velcro straps hold the back wheels in place with the power of two 6” SeaSuckers each, and a Velcro wheel strap for the front wheel too. Maybe the easiest trike mounting system in the world. 1/2” HDPE platform for strength and durability. 19”x6” footprint for each side. 7.2 lbs.

Although we designed this bottle holder with the team support cars in mind, you’re also welcome to use it for post-race festivities. Five bottle cages on a 1/2” HDPE platform allow you to have fresh water at the ready for your riders. Held in place with two 6” SeaSucker vacuum mounts. 26”x6” footprint. 3.2 lbs.

Cable Anchor

Why SeaSucker?With traditional bike racks, you’ve got to find the right rack to fit the exact place where you want to attach it. Plus, they’re cumbersome, difficult to install and just plain ugly. But with SeaSucker racks, all you really need to do is find some clear space on your car and pump it on. Most SeaSucker racks can be used in multiple spots, whether it’s on your trunk, your rooftop, or even the glass on your SUV or hatchback. There are no hooks to ruin your paint job, no expensive special adapters to make the rack fit your year and model car, and no complicated instructions for installation. And to top it all off, they look great! Say goodbye to ugly, bulky racks, and say hello to sleek and compact SeaSucker racks.

Simplicity...Garages across the country are littered with racks that don’t fit right or are just too damned complicated to put on. SeaSucker racks attach to almost any car in seconds without the need for factory-installed cargo bars or straps. Just wet the cups and pump them up. Our single bike racks are so compact you can throw them in your luggage for your next bike vacation. All of our racks easily stow away inside your trunk when not in use.

Our PromiseWith all SeaSuckers fully engaged, our racks will hold bicycles up to 45 lbs each at speeds not exceeding 75mph. The rack will tell you if the SeaSuckers are not maintaining vacuum: the orange power band in the pump will become visible if the SeaSucker begins to lose vacuum.

All You Have To DoAttach the rack to a clean surface on your car by pumping the SeaSucker vacuum cups until the orange power indicators on the built-in finger pumps are no longer

visible. You should inspect the SeaSuckers when entering and exiting your vehicle, looking for the orange power indicator. If you see orange, re-pump that SeaSucker back to full power before heading back out onto the road. If a SeaSucker doesn’t hold vacuum for at least 4 hours, you may need to clean it, repair it, or replace it.

Better Technology; Better Racks.SeaSucker bike racks attach with the power of vacuum. The built-in finger pump allows you to pull a vacuum with a maximum strength of over 200 lbs! That’s a lot of holding power, but when you put multiple SeaSuckers together on one rack, the holding strength goes off the chart. All you need to make it work is a smooth clean surface, like the metal or glass on your car. Plus, they’re safe for your car’s paint and they’re built to withstand the elements (they were originally made for the saltwater environment so you know they have to be tough).

Safety First!SeaSuckers incorporate an essential safety feature that lets you drive with complete confidence – if a SeaSucker begins to lose vacuum pressure, the pump slowly extends and exposes an orange line, providing a visual indicator of vacuum strength. Because the pump is built right into the SeaSucker, all you have to do is pump it a couple of times to maintain full power. Strength-wise, all models are over-built with multiple vacuum mounts. Plus, almost all models are made with easy-access holes and slots for attaching straps and bungee cords.

Other SeaSucker Products

How Do They Really Work?

Pump to engage the vacuum. When you can’t see the orange

band, you’re at full strength. If your SeaSucker loses vacuum over time,

the orange band will be exposed, and you only have to give it a few pumps to get back to full power. To remove, use

the integrated tabs on the vacuum cup to lift the edge and break the vacuum.

Pump to EngagePower Indicator

Lift Tab to Release

SeaSucker Bike Racks... Any Car, Any Place, Anytime!

1700 14th Ave. East • Suite 101 • Palmetto, FL 34221

941-586-2664 • info@seasucker.com

www.seasucker.com

“Installation was like pouring Frosted Flakes in a bowl. It took literally 2 - 3 minutes to install both racks.”

Freddy Edney, JET Cycling

“I struggled to find a rack to fit anywhere on my car, and now I've got one that works on my trunk and one that works on my roof - and it's the same rack!.

Looking forward to what comes next.”Joel V.B. - Trabuco Canyon, CA

“Surprisingly powerful. I think I could drive this thing through a hurricane (not that I would!).”

Tom P. - Melbourne, FL

“You're really on to something here. Where was this product 2 years ago when the hooks on my old rack were digging into my paint?”

Steve M. - Charlotte, NC

“I love that I can stick this thing on by myself when I need it. It couldn't be easier

and it works like a charm.”Janet S. - Downers Grove, IL

“Even though I own a bike store, I’ve never been able to find a rack that works on my Corvette, until I found SeaSucker. Awesome!”

Manny @ University Bicycle Center - Tampa, FL

Vacuum-Mount

Bike Racks

Vacuum-Mount

Bike Racks