scyon™ and james hardie products - finlayson€¦ · section 16 scyon™ and james hardie ......

215ALL PRICES INCLUDE GST. Ask in store about our Price Guarantee.

Scyon ™ Axon™and Scyon™ Matrix™ cladding

Scyon™ Linea™ weatherboard

Scyon™ Stria cladding

Scyon ™ Accent™ trim

Scyon™ Secura™ interior flooring

Scyon™ Secura™ exterior flooring

Primeline® and Hardiplank® weatherboard

Hardiflex® sheet products and Panelclad® sheet

Harditex® sheet products

Exotec® facade panel and fixing system

Comtex® facade panel

Villaboard®, Versilux®, Pineridge® and Hardigroove® lining

Hardipanel® compressed sheet

Underlay Sheets

Hardibrace® sheet bracing

Exotec® facade panel

Artista® products

HardieDeck®

General Accessories

Section 16 Scyon™ and James Hardie® Products

216 “Celebrating 141 YEARS.”

Scyon™ Matrix™

cladding

Scyon™ Stria™

cladding


Section 16 SCYON™ and JAMES HARDIE® PRODUCTS

Scyon™ Axon™ cladding 133mm wide smooth


Grained Texture 133mm wide

groove spacing

Smooth Texture133mm wide

groove spacing

Smooth Texture400mm wide

groove spacing

* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.^ Not to be used in fire applications.

What are the sizes?Product

code Surface Texture

Groove Spacing (mm)

Length (mm)

Width (mm)

Thickness (mm)

Mass (kg/m2)

403931 Smooth 133 2,450 1,200 9 12.5

404417 Smooth 400 2,450 1,200 9 12.5

403932 Smooth 133 2,750 1,200 9 12.5

404418 Smooth 400 2,750 1,200 9 12.5

403933 Smooth 133 3,000 1,200 9 12.5

404419 Smooth 400 3,000 1,200 9 12.5

404510 Grained 133 2,450 1,200 9 12.5

404511 Grained 133 2,750 1,200 9 12.5

404512 Grained 133 3,000 1,200 9 12.5

Selling units per pack: 30 sheets

What are the accessories?

Accessory Code Page

HardieBlade™ Saw Blade 185mm 300660 51


HardieDrive™ Screws 32mm long 305532 51


James Hardie™ 9mm Aluminium External Corner 305521 52

James Hardie™ 9mm Aluminium Horizontal h Flashing 3,000mm long

305613 52

James Hardie™ 9mm Aluminium Horizontal h Jointer 305614 52

James Hardie™ 9mm Aluminium Internal Corner 305520 53

James Hardie™ Aluminium Snap On Corner (2 pieces per set)

305513 53

James Hardie™ 50mm wide Foam Back Sealing Tape 304560 54

James Hardie™ Joint Sealant^ 300ml cartridge 305534 54

James Hardie™ Joint Sealant^ 600ml sausage 305672 54

What is it?A vertically grooved cladding panel that looks sharp and uniform. Pre-primed and easy to install, Scyon™ Axon™ cladding is a pristine look that lasts.

Where do you use it?In residential applications wherever a modern design is required, including external walls in composite construction, upper-storey and ground-level extensions, and internal feature walls.

What are the key benefits?SPEED. The stepped shiplap on the long edges of Axon™ cladding means sheets are easily installed. Paint application is fast because the pre-primed sheets mean less paint and time is needed to achieve a high-quality finish. Finally, sheets are sized to fit common wall frame sizes, which means less waste and cutting.

DESIGN OPTIONS. Whether you choose the smooth or grained surface texture, the vertical grooves – sharp and consistent, are a design alternative to typical horizontal features. The option of brad nailing minimises visual interruption. Axon™ cladding can also be used to add texture as an eave or soffit lining. Made from Scyon,™ it will resist shrinking, swelling and cracking* to hold paint longer than wood and can therefore be painted dark as well as light colours.

ENHANCES ENERGY EFFICIENCY. When Axon™ cladding is used with the right insulation and in accordance with the standard installation instructions, an R-Value of up to 2.8 can be achieved for the wall. Greater Total R-Values can be achieved through the use of cavity wall construction and reflective vapour permeable membranes. Refer to the James Hardie’s Wall System Thermal Performance Total R-Values Technical Supplement for more information.

MADE FROM SCYON.™ Axon™ cladding is made from Scyon,™ the advanced lightweight cement composite with heavy-duty performance. Not only is it resistant to damage from termites, rot and fire*, but it can also be gun nailed and is easy to cut – like timber.

MADE IN NEW ZEALAND.

Scyon™ Axon™ claddingAxon™ installation

50mm EPDM foamback sealing tape

HardieWrapTM

weather barrier



Scyon™ Linea™ Weatherboard 150mm


7

Linea™ weatherboard installation


Accessory Code Page





James Hardie™ 16mm Aluminium Internal Corner Mould 305511 53



Linea™ Aluminium Corner Soaker for 150mm wide boards

305574 55

Linea™ Aluminium Corner Soaker for 180mm wide boards

305572 55

Linea™ Aluminium External Slimline Boxed Corner 305512 55

Linea™ Aluminium Universal Window Adaptor 305510 55

Linea™ PVC Box Corner Z Flashing 305570 56

Linea™ PVC Starter Strip 305571 56


What is it?A 16mm thick horizontal weatherboard with deep shadow lines. Scyon™ Linea™ weatherboard is the weatherboard that weathers well.

Where do you use it?In residential applications wherever a contemporary design is required, including external walls in composite construction, upper-storey and ground-level extensions, and internal feature walls.

What are the key benefits?DESIGN OPTIONS. The 16mm thick profile creates consistent deep shadows. The range of corner finishing details – aluminium or Scyon™ Axent™ trim – means that a range of different looks can be achieved. The Linea™ window adaptor can be used for subtle window treatments or the Axent™ trim can provide a contrast. Face or concealed fixing rounds out the options.

EASY TO INSTALL. Linea™ weatherboards are back bevelled to sit flush with the stud. Paint application is fast because the pre-primed sheets mean less paint and time is needed to achieve a high-quality finish.

LOW MAINTENANCE. Linea™ weatherboard will maintain its integrity and general appearance significantly longer than timber. Some timber is susceptible to cracking in exterior applications, which in turn can lead to shrinking or warping. Linea™ will resist shrinking, swelling and cracking1 to hold paint longer than wood, and can also be painted dark as well as light colours.

ENHANCES ENERGY EFFICIENCY. When Linea™ weatherboard is used with the right insulation and in accordance with the standard installation instructions, an R-Value of up to 2.8 can be achieved for the wall. Greater Total R-Values can be achieved through the use of cavity wall construction and reflective vapour permeable membranes. Refer to the James Hardie’s Wall System Thermal Performance Total R-Values Technical Supplement for more information.

MADE FROM SCYON.™ Linea™ weatherboard is made from Scyon,™ the advanced lightweight cement composite with heavy-duty performance. Not only is it resistant to damage from termites, rot and fire*, but it can also be gun nailed and is easy to cut – like timber.

Scyon™ Linea™ weatherboard

Pre-markedpositionof bottomof first board

Linea™ PVCstarter strip.

HardieWrap™

weather barrierFraming

What are the sizes?Product Product

codeLength (mm)

Width (mm)

Thickness (mm)

End details Coverage information

Effectivecover (mm)

No. of planks/ metre height

Mass (kg/m2)

150mm Linea™ weatherboard 403930 4,200 150 16 Tongue & Groove 120 8.3 21.1

180mm Linea™ weatherboard 403912 4,200 180 16 Tongue & Groove 150 6.7 21.1



Scyon™ Matrix™ Cladding




What are the sizes?

Product code Length (mm) Width (mm) Thickness (mm) Mass (kg/m2)

403811 1,190 1,190 8 12.6

403810 2,390 590 8 12.6

403812 1,790 890 8 12.6

404169 2,990 1,190 8 12.6

Scyon™ cavity trim

403840 2,450 70 19 3.4


Accessory Code Page




James Hardie™ 9mm Aluminium External Corner 305521 52

James Hardie™ Backing Strip 1,190mm 305557 53



James Hardie™ Base Coat 15kg Bag 304491 53

James Hardie™ Facade Washers 305565 53



James Hardie™ 18mm PVC Cavity Vent Strip 305555 54

Matrix™ cladding installation

Scyon™ Matrix™ cladding

What is it?An exterior cladding system with a geometric, expressed-joint look.

Where do you use it?In residential and medium-density applications wherever a modern design is required, including external walls in composite construction, upper-storey and ground-level extensions and internal feature walls.

What are the key benefits?SIMPLE TO INSTALL. Instead of needing the steel top hats associated with many commercial systems, Scyon™

Matrix™ cladding sheets are installed with Scyon™ cavity trim battens. The expressed joint is created easily using a 10mm packer. Sheets are sanded smooth and pre-primed for fast paint application and a high-quality finish.

DESIGN OPTIONS. Square and rectangular panels with an expressed joint mean a variety of looks can be created, from horizontal and vertical stripes to geometric patterns. Sanded sheets give a flat, smooth finish and digital printing can add even more design options. Matrix™ cladding’s resistance to cracking, warping and swelling* means it can be painted both dark and light colours. The option of brad nailing minimises visual interruption. Matrix™ cladding may be specified for timber-framed or steel-framed structures.

DURABILITY. The Matrix™ cladding panels are sealed on all sides for durability and stability.

ENHANCES ENERGY EFFICIENCY. When Matrix™ cladding is used with the right insulation and in accordance with the standard installation instructions, an R-Value of up to 3.3 can be achieved for the wall. Greater Total R-Values can be achieved through the use of cavity wall construction and reflective vapour permeable membranes. Refer to the James Hardie’s Wall System Thermal Performance Total R-Values Technical Supplement for more information.

MADE FROM SCYON.™ Matrix™ cladding is made from Scyon,™ the advanced lightweight cement composite with heavy-duty performance. Not only is it resistant to damage from termites, rot and fire*, but it can also be gun nailed and is easy to cut – like timber.


100mm

Scyon™ cavity trim

James Hardie™

backing strip100mm

Continuous 6mmbead of James Hardie™

joint sealant

Matrix™ panel

James Hardie™ joint sealantor double sided backing tape

HardieWrap™

weather barrier


* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.** Can be gun nailed for face fixing only.^ Not to be used in fire applications.

What is it?A range of cladding that features a horizontal ship-lapped joint. Pre-primed and easy to install, Stria™ cladding is the fast way to achieve a timeless and classic look that endures.

Where do you use it?In residential applications wherever a timeless, classic and enduring look is required, including external walls in composite or full wrap construction, upper-storey and ground-level extensions and internal feature walls.

What are the key benefits?DESIGN OPTIONS. There are three profiles to choose from in the Stria™ cladding range, each offering a variation of a ‘classic’ look.

STRIA™ CLADDING• standard profile 325mm wide

14mm thick with a square horizontal edge that gives the timeless charm and classic appeal of decorative rendered and raked masonry.

• wide profile 405mm wide14mm thick with a square horizontal edge that gives the timeless charm and classic appeal of decorative rendered block-work.

• splayed profile 255mm wide16mm thick with a splayed horizontal edge that gives the timeless charm and classic look of traditional timber.

And each of these looks can be further enhanced by your choice of corner detailing, for example, aluminium, mitred or Scyon™ Axent™ trim. Easy-to-cut mitred corners mean that horizontal lines wrap the building seamlessly. Alternatively, Scyon™ Axent™ trim can provide a contrast. Plus, a vertical flashing stop provides a 15mm vertical groove to match the horizontal for a more geometric treatment.

SPEED. Stria™ cladding is the fast and simple way to create a timeless and classic look. Once the first board is fixed level, the shiplapped joint on the next extra-wide, 4.2m long board is fixed to the top of the previous board and can be joined on or off stud. For a classic rendered and raked masonry look, compare this to the slower process of laying bricks, rendering, scoring and painting (and with all the associated mess and scheduling of different trades).

Scyon™ Stria™ cladding

LOW MAINTENANCE. Stria™ cladding will maintain its integrity and general appearance significantly longer than timber. Some timber is susceptible to cracking in exterior applications, which in turn can lead to shrinking or warping. Stria™ cladding will resist shrinking, swelling and cracking* to hold paint longer than wood and can also be painted dark as well as light colours.

ENHANCES ENERGY EFFICIENCY. When Stria™ cladding is used with the right insulation and in accordance with the standard installation instructions, an R-Value of up to 2.8 can be achieved for the wall. Greater Total R-Values can be achieved through the use of cavity wall construction and reflective vapour permeable membranes. Refer to the James Hardie’s Wall System Thermal Performance Total R-Values Technical Supplement for more information.

MADE FROM SCYON.™ Stria™ cladding is made from Scyon,™ the advanced lightweight cement composite with the heavy-duty performance. Not only is it resistant to damage from termites, rot and fire*, but it can also be gun nailed** and is easy to cut – like timber.

MADE IN NEW ZEALAND (WIDE PROFILE).

What are the sizes?Product Size (nominal) Coverage information

Product code Profile Length (mm)

Width (mm)

Thickness (mm)

Effectivecover (mm)

No. of boards/ metre height

Mass (kg/m2)

404063 Standard 4,200 325 14 300 3.3 18.93

404413 Wide 4,200 405 14 380 2.6 18.93

404522 Splayed 4,200 255 16 230 4.3 21.60

Standard Profile 325mm wide

Wide Profile 405mm wide

Splayed Profile 255mm wide




Accessory Code Page





James Hardie™ 14mm Aluminium External Trim Corner 305519 52

James Hardie™ 16mm Aluminium External Trim Corner 305630 52

James Hardie™ 14mm Aluminium Internal Corner 305518 53

James Hardie™ 16mm Aluminium Internal Corner Mould 305511 53

James Hardie™ 75x75mm Colorbond® Corner Flashing 305564 53



Stria™ Vertical Flashing Stop 305547 57

Stria™ cladding installation

Scyon™ Stria™ Cladding 405mm wide


For more information about performance, installation, warranties and warnings visit scyon.com.au




* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.** A priming coat is recommended to be applied over all sheets before tiling, refer to the manual. ^ Not to be used in fire applications.

What is it?An external structural flooring substrate for tile finishes over timber or lightweight steel floor joists. Simple and fast to install, Secura™ exterior flooring helps give you extra peace of mind against moisture damage to balconies and decks.

Where do you use it?As an external substrate for tiled residential balconies and decks. It’s an alternative to particle board, plywood or compressed fibre cement.

What are the key benefits?SECURITY. Secura™ exterior flooring is sealed on all sides with an advanced polymer coating that helps protect the board from moisture-related problems. A topcoat on the surface of the board provides good adhesion. The continuous mesh reinforcement on the underside enhances the heavy-duty performance of Scyon™, adding extra strength and impact resistance to deliver a suitable external residential flooring substrate.

FAST AND EASY TO INSTALL. Scyon™ Secura™ exterior flooring can be up to 40% faster to install than conventional compressed fibre cement sheet. This is because it’s made from Scyon™ which is about 24% lower in density than compressed fibre cement, making it lighter, and easier to handle and install, without compromising heavy-duty performance. In fact, there’s no need for pre-drilling and screwing, because it can be gun nailed and is easy to cut like timber. It’s also tongue and grooved, which delivers engineered joints and eliminates the need for timber trimmers under these joints.

NO FUSS. For balconies that aren’t over habitable rooms – verandas for example – no additional waterproofingmembrane is needed once Secura™ exterior flooring is installed**. For balconies over habitable rooms, a waterproofing system needs to be applied.

MADE FROM SCYON.™ Secura™ exterior flooring is made from Scyon™, the advanced lightweight cement composite with the heavy-duty performance. Not only is it resistant to damage from termites, rot and fire*, but it can also be gun nailed and is easy to cut – like timber.



code Length (mm)

Width (mm)

Thickness (mm)

Joint Centres (mm)

Mass (kg/m2)

Edge Colour

404050 2,700 600 19 450 24.5 Light Blue

404689 2,400 600 22 600 28.3 Dark Blue


Accessory Code Page






Scyon™ Secura™exterior fastener layout

Joists at 450mm max. centres (for 19mm thick) and 600mm max. centres (for 22mm thick)

25mm min, distancefrom tongue and groove

Tongue end

50mm min.corner distance

12mm min.fastener edgedistance

Groove end

200mmmax.





code Length (mm)

Width (mm)

Thickness (mm)

Joint Centres (mm)

Mass (kg/m2)

Edge Colour

404173 2,700 600 19 450 24.5 White

403550 1,800 900 19 450 24.5 White

404691 2,400 600 22 600 28.3 Dark Grey


Accessory Code Page






* When installed and maintained correctly and to the extent set out in James Hardie’s published literature current at the time of installation.** Exposure to the elements should not be longer than three months.^ Not to be used in fire applications.

What is it?A heavy-duty but lightweight structural flooring substrate that does double duty – it can be easily used for tile, vinyl and carpet finishes over timber or steel floor joists in both residential general interiors and wet areas. Simple and fast to install, Scyon™ Secura™ interior flooring is the easiest way to get top protection against moisture damage to all interior floors.

Where do you use it?As a substrate for direct fixing of tiles, vinyl and carpet in residential floors and wet areas, as an alternative to particle board, plywood or compressed fibre cement.

What are the key benefits?FAST AND EASY TO INSTALL. Scyon™ Secura™ interior flooring can be up to 40% faster to install than conventional compressed fibre cement sheet. This is because it’s made from Scyon™ which is about 24% lower in density than compressed fibre cement, making it lighter, and easier to handle and install, without compromising heavy-duty performance. In fact, there’s no need for pre-drilling and screwing, because it can be gun nailed and is easy to cut like timber. It’s also tongue and grooved. This edge delivers an engineered joint, eliminates the need for timber trimmers under these joints, and is compatible with other flooring products of the same thickness.

NO FUSS. The moisture-resistant sealer on all sides combined with the moisture-resistant properties of Scyon™, removes the need for full floor waterproofing outside enclosed shower areas. And unlike some timber products, tiles and vinyl can be directly fixed without the need for an underlay sheet.

SECURITY. Secura™ interior flooring is resistant to damage from moisture, so if rain holds you up during construction and the roof’s not yet on**, the product won’t need replacing or sanding because its warped and twisted, like some timber products*. This resistance to moisture damage also means that if there is a waterproofing failure some time in the future, then the Secura™ interior flooring will continue to perform, even if it gets wet. The strong, no-squeak feel of Secura™ interior flooring also gives a solid impression without the weight and cost of concrete.

MADE FROM SCYON.™ Secura™ interior flooring is made from Scyon™, the advanced lightweight cement composite with the heavy-duty performance. Not only is it resistant to damage from termites, rot and fire*, it can also be gun nailed and is easy to cut – like timber.


Scyon™ Secura™ interior fastener layout

Joists at 450mm max. centres (for 19mm thick) and 600mm max. centres (for 22mm thick)

25mm min, distancefrom tongue and groove

Tongue end

50mm min.corner distance

12mm min.fastener edgedistance

Groove end

200mmmax.



Because it’sHardieDeck™

not hard workNEW

HardieDeck™ compressed fibre cement boards godown fast and, with a 10 year warranty, are built tolast. The Fast-track fixing system makes installationquicker and more cost-effective than other deckingmaterials, creating an opportunity to install moredecks. After installation the 196mm wide boardscan be coated in your choice of colour. To watch anInstallation Video scan the QR code.

Visit HardieDeck.com.au

The Fast-track fixing system makes installation quick.

™ and ® denote a trademark owned by James Hardie Technology Limited.

It’s not hard to build or maintain.

Available from

Build More Decks HardieDeck™ goes down fast. The fast-track fixing system makes installation quicker so you can build more decks. Using HardieDeck means no pre-drilling, counter-sinking or board spacing and it’s more cost-effective than other decking materials.

HardieDeck is durable - it won’t split or rot and is resistant to termites, fire and moisture damage - so you can focus on building new decks instead of fixing call backs. The fibre cement boards and powder-coated aluminium accessories are all backed by a 10 year warranty.

InstallationHardieDeck is fast to install, with uniform 196mm wide and 3000mm long compressed fibre cement decking boards. The boards are 19m thick and have grooves machined into the long edges. The fastening mechanism is concealed and the jointing system consists of an anodised aluminium base jointer that is screwed to the framing joists. A powder-coated snap-in cover then covers the screw heads and gives a continuous contrasting line between the decking boards after the boards have been painted.

Because it’s HardieDeck™ not hard work



1

3

7

4

25 6or

8or Suitable for all Bushfire Prone Areas

The designer or specifier must refer to the HardieDeck™ System Installation Guide for suitability and design considerations in the intended application. HardieDeck™ system must be coated or sealed, refer to Step 6. Ensure information is up to date, if in doubt, visit HardieDeck.com.au or call 13 83 53 for information and advice.

System Components

1 HardieDeck™ Board

Main decking board slotted in both short ends

Dimensions: 196 x 3000 x 19mm

Part No. 404780 Approx Weight 18kg

HardieDeck™ Double Winged Base Jointer

Used to join all long edges of HardieDeck™ board

Dimensions: 13 x 3000mm

Part No. 305841 5 per pack

3 HardieDeck™ Snap-In Top Strip

Snap-in cover strip for double winged base jointer



4 FastenerTimber Frames:

8-10 gauge 25mm button head needle point screw(min. class 3*)

Steel Frames: 8-18 gauge 16mm pan head metal tek screw(min. class 3*)

5 HardieDeck™ Fascia Edge Cap

Used for a concealed fascia and deck junction

Dimensions: 3000mm long

Part No. 305844 Sold seperately

6 HardieDeck™ Slimline Edge Cap

Used for the deck edge with no fascia board

Dimensions: 3000mm long

Part No. 305846 Sold seperately

7 HardieDeck™ Edging Board

Decking board slotted in one short edge.Used for exposed edges or as a fascia board



8 HardieDeck™ Finishing Board

Wider decking board with no slots. Used for breaking patterns and stair treads



not featured HardieDeck™ Wingless Base Jointer

Used to join HardieDeck board short edges



2

FOR BOARDS

Dust reducing circular saw equipped with HardieBlade® Saw blade vacuum and filter appropriate for capturing fine (respirable) dust.

Part no. 306660

FOR SMALL SECTIONS

Jigsaw Blade

E.g. Makita B-60 Tungsten Jigsaw Blade

For information on safe working practices refer to the product MSDS and James Hardie Best Practise Guide at HardieDeck.com.au and the safe workplace government autority in your state to creat a safe working environment.

STORAGE AND HANDLINGTo avoid damage, James Hardie® building products should be storedwith edges and corners of the product protected from chipping. James Hardie building products must be installed in a dry state and protected from weather during transport and storage. The product must be laid flat under cover on a smooth level surface clear of the ground to avoid exposure to water and moisture.

PROTECTIVE EQUIPMENTWhen cutting, wear aproperly-fitted, approved dust mask or respirator (e.g. P1 or P2) in accordance with applicable government regulations and manufacturer instructions to further limit respirable silica exposures

CUTTINGAlways cut outdoors. Position cutting station so wind will blow dust away from the user or others in working area.Use one of the following methods based on the required cutting rate:

Safe Working Practises

James Hardie Fire Rated Systems

HardieSmart™ Boundary wall system

A compact boundary wall solutionDesigned for townhouses, terraces and detached buildings where external walls are in close proximity from the boundary and all bushfire zoned areas.

For every 10m wall length, gain 1.25m² of internal space per wall.#

HardieSmart™ Aged care wall system

A simple and fast senior living wall solutionUsed in separating walls between occupancies in Aged Care buildings as well as common facilities and corridors.

Increase internal floor space by up to 12% per wall.*

HardieSmart™ Intertenancy wall system

A simple and fast common wall solutionDesigned for common walls between tenancies in multi-residential developments, townhouses and terraces requiring semi-detached construction.

Increase internal floor space by up to 18% per common wall.^

HardieSmart™ Zerolot wall system

Build as you sellA dual boundary wall solution designed to provide fully detached construction for townhouses and terraces with minimum offset.

For every 10m wall length, gain 2.45m² of internal space per dwelling.#



Available through Finlayson’s

CODE DESCRIPTION PRICE

SCYON™ AXON™ CLADDING (9mm) and ACCESSORIES

403931 133mm wide grooves / 2450 x 1200mm $106.21



404510 Grained 133mm wide groove spacing 2450 x 1200mm $106.22






304560 JH 50mm wide Foam Back Sealing Tape 25m long roll $80.83

305520 JH 9mm Aluminium Internal Corner 3000mm long $40.12

305521 JH 9mm Aluminium External Corner 3000mm long $ 39.91

305513 JH Aluminium Snap on Corner 3000mm long (2 pieces) $ 74.95

305613 JH 9mm Aluminium Horizontal h Flashing 3000mm $15.59

305614 JH 9mm Aluminium horizontal h Jointer $0.96

SCYON™ MATRIX™ CLADDING (8mm) and ACCESSORIES

403810 Matrix Panel 2390 x 590 $49.85

403812 Matrix Panel 1790 x 890 $49.29

403811 Matrix Panel 1190 x 1190 $50.06

404169 Matrix Panel 2990 x 1190 $110.09

403840 Scyon cavity trim 2450 x 70 (19mm) $23.32

305555 JH 18mmpvc cavity vent strip 3m $9.30

305557 JH backing strip 1190mm $4.77



305565 JH facade washer box of 1000 $1.02

SCYON™ LINEA™ WEATHERBOARD (16mm) and ACCESSORIES

403930 4200 x 150 $29.67

403912 4200 x 180 $36.90

305512 Linea alum ext slim box corner 3.6mm $82.78

305511 linea alum int corner mould 3.6m $50.11

305570 linea pvc box cnr z flashing 2.7m $14.65

305571 linea pvc starter strip 3m $13.48

305572 linea 180mm alum cnr soaker 90o $3.24

305574 linea 150mm alum cnr soaker 90o $3.14

305510 linea alum uni window adaptor 3.7m $42.70

SCYON™ STRIA™ CLADDING and ACCESSORIES

404063 Standard profile 4200 x 325 x 14mm $78.78

404413 Wide Profile 4200 x 405 x 14mm $109.77

404522 Splayed profile 4200 x 255 x 16mm $66.79

305547 Stria™ Vertical Flashing Stop 3000mm $23.99

305518 JH 14mm Aluminium Internal Corner 3000mm $40.93

305519 JH 14mm Aluminium External Box Corner 3000mm $53.02

305511 JH 16mm Aluminium Internal Corner Mould 3600mm $50.11

305564 JH 75x75mm Colorbond® Corner Flashing 3000mm $23.84

305630 JH 16mm Aluminium External Trim Corner 3000mm $47.60

SCYON™ AXENT™ TRIM

403626 45 x 38 x 4200mm $37.09

404662 45 x 19 x 4200mm $35.83

404402 89 x 38 x 3640mm sanded/grooved back $52.80

404400 89 x 19 x 3640mm sanded/grooved back $37.63

403840 Scyon Cavity Trim 70 x 19 x 2450mm $23.45

Scyon™ and James Hardie® Products 16

16.1 Scyon™ Axon™ | Matrix™ | Linea™ 16.2 Secura™ | HardiePlank™ | Hardieflex™



SCYON™ SECURA™ INTERIOR FLOORING (19mm and 22mm)

404173 2700 x 600mm x 19mm $115.95

403550 1800 x 900mm x 19mm $117.69

404691 2400 x 600mm x 22mm $111.73

SCYON™ SECURA™ EXTERIOR FLOORING (19mm)

404050 2700 x 600mm x 19mm $134.67

404689 2400 x 600mm x 22mm $127.37

PrimeLine® weatherboard (9mm) pre-primed and ACCESSORIES

400103 Chamfer - 4200 x 300mm $47.56

400153 Heritage - 4200 x 300mm $45.43

400319 Newport - 4200 x 170mm $29.45

400380 Summit - 4200 x 230mm $40.88

305525 PrimeLine® Galvanised Universal Off Stud Joint Clip $0.57

305513 JH Aluminium Snap On Corner 3000mm $74.53

305568 JH 7.5mm PVC Starter Strip 3000mm long $13.97

HardiePlank™ weatherboard (7.5mm) and ACCESSORIES

400265 Smooth - 4200 x 230mm $20.66

400266 Smooth - 4200 x 300mm $29.19

403080 Woodgrain - 4200 x 230mm $22.63

403081 Woodgrain - 4200 x 300mm $31.82

400371 Old Style - 4200 x 205mm $25.12

400378 Rusticated - 4200 x 205mm (pre-primed) 26.18

305524 HardiePlank Galvanised Stud Clip $0.44

305528 HardiePlank Zincalume Footmould 3000mm $26.65

305548 HardiePlank Smooth PVC Jointer for 230mm $0.67

305549 HardiePlank Smooth PVC Jointer for 300mm $0.87

305550 HardiePlank Woodgrain PVC Jointer for 230mm $0.76

305551 HardiePlank Woodgrain PVC Jointer for 300mm $0.94

305514 HardiePlank Aluminium Ext Corner Soaker for 230mm $1.74

305515 HardiePlank Aluminium Ext Corner Soaker for 300mm $1.81

305516 HardiePlank Aluminium Int Corner Soaker for 230mm $1.47

305517 HardiePlank Aluminium Int Corner Soaker for 300mm $2.00

305523 HardiePlank Galvanised Soaker Jointer for 205mm $1.44



305513 JH Aluminium Snap On Corner 3000mm (2 pieces) $74.17

HardieFlex™ sheet (4.5mm)

400195 1800 x 900mm $16.12

400193 2400 x 900mm $21.49

400192 2700 x 900mm $24.15

400191 3000 x 900mm $26.86

400189 1800 x 1200mm $21.48

400188 2100 x 1200mm $25.06

400186 2400 x 1200mm $28.66

400184 2700 x 1200mm $32.24

400182 3000 x 1200mm $35.81

HardieFlex™ sheet (6mm)

400175 2400 x 900mm $32.62

401970 3000 x 900mm * $45.04

400173 1800 x 1200mm $32.62

400171 2400 x 1200mm $43.51

400169 2700 x 1200mm $48.94

400167 3000 x 1200mm $54.38


Available through Finlayson’s


16.3 PanelClad® | HardiTex™ | ExoTex™ 16.4 ComTex® | Villaboard® | Versilux®


PanelClad® SHEET (6mm) and ACCESSORIES

400404 Stucco - 2440 x 1200mm $68.23

400417 TextureLine - 2700 x 1198mm $86.21

305780 TextureLine PVC Straight Jointer 2700mm $4.99

HardieTex™ system base sheet (7.5mm) and ACCESSORIES

400293 2440 x 900mm $32.70

400295 2725 x 900mm $36.51

400296 3000 x 900mm $40.22

401651 2440 x 1200mm $43.97

400294 2725 x 1200mm $48.71

400291 3000 x 1200mm $53.63

305568 7.5mm PVC Starter Strip 3000mm $13.90

305569 HardieTex™ 7.5mm PVC Z Flashing 3000mm $11.29

EasyLap™ panel (8.5mm) and ACCESSORIES

404186 3000 x 900mm $68.07

404184 2440 x 1200mm $73.83

404185 3000 x 1200mm $90.75

304560 50mm wide Foam Back Sealing Tape 25m roll $80.83

305520 9mm Aluminium Internal Corner 3000mm $40.13

305521 9mm Aluminium External Corner 3000mm $39.91

305613 9mm Aluminium Horizontal h Flashing 3000mm $15.59

305614 9mm Aluminium horizontal h Jointer $1.02

HardieFlex™ SHEET (4.5mm) in eaves lining sizes

400393 2400 x 450mm $10.74

400392 2400 x 600mm $14.33

400391 2400 x 750mm $17.91

HardieFlex™ SHEET (6mm) in eaves lining sizes

400389 2400 x 600mm $21.35

HardieFlex™ SHEET in eaves lining sizes ACCESSORIES

305506 PVC Eave and Soffit Expressed Jointer (White) $6.03

305432 PVC Eave and Soffit Expressed Jointer (Black) $8.08

305538 PVC Straight Jointer for 4.5mm thick sheets 2400mm $3.04

305541 PVC Straight Jointer for 4.5mm thick sheets 3000mm $4.17

305546 PVC Straight Jointer for 6mm thick sheets 3000mm $6.12

ExoTec® FACADE PANEL (9mm)

402200 1800 x 900mm $77.87

402204 2400 x 900mm $103.86

402208 3000 x 900mm $129.75

402201 1800 x 1200mm $105.29

402203 2100 x 1200mm $121.09

402205 2400 x 1200mm $135.16

402207 2700 x 1200mm $155.69

402209 3000 x 1200mm $172.96

ExoTec® FACADE PANEL (12mm)

402333 2400 x 1200mm $208.87

402334 3000 x 1200mm $254.80


EXOTEC® FIXING SYSTEM - USED WITH 9mm EXOTEC® FACADE

305557 James Hardie™ Backing Strip 1190mm $43.20



305556 ExoTec® Gasket Snap Strip 3620mm $188.27

304572 ExoTec® Top Hat 6000mm $82.19

304571 ExoTec® Top Hat 7200mm $109.67

302701 James Hardie™ Intermediate Top Hat 6000mm $58.32


305565 James Hardie™ Façade Washers $86.67

ComTex® FACADE PANEL (9mm)

400144 2400 x 1200mm $113.86

400143 3000 x 1200mm $142.35

ComTex® FIXING SYSTEM

305553 ComTex® PVC Starter Strip 3600mm $11.22

304573 ComTex® Top Hat 6000mm $58.65



Villaboard® LINING (6mm)

400367 2400 x 900mm $26.47

400366 3000 x 900mm $33.09

400364 1800 x 1200mm $26.48

400362 2400 x 1200mm $33.77

400361 2700 x 1200mm $40.28

400360 3000 x 1200mm $42.22

400359 3600 x 1200mm $53.70

400358 4200 x 1200mm $61.64

400370 2400 x 1350mm $39.24

400369 3000 x 1350mm $47.40

400368 3600 x 1350mm $58.87

400363 4200 x 1350mm $84.64


400357 2400 x 1200mm $61.64

400356 2700 x 1200mm $69.35

400355 3000 x 1200mm $77.01

400354 3600 x 1200mm $92.70

403331 3000 x 1350mm $26.62


400352 3000 x 1200mm $111.22

Versilux® LINING (4.5mm)

400454 2400 x 900mm * $29.58

400452 2400 x 1200mm * $43.38

400450 3000 x 1200mm * $54.21

400449 3600 x 1200mm * $65.06



16.5 Versilux® | PineRidge® | HardiePanel® 16.6 HardieScreen® | Artista® | HardieSmart®



Versilux® LINING (6mm)

400425 3000 x 900 - Bevelled Edge † $47.57

400424 2400 x 1200 - Bevelled Edge † $50.76

400423 2700 x 1200 - Bevelled Edge † $58.47

400422 3000 x 1200 - Bevelled Edge † $64.95

400421 3600 x 1200 - Bevelled Edge † $77.94

404774 3000 x 900 - Square Edge † $48.69

404775 2400 x 1200 - Square Edge † $51.94

404776 2700 x 1200 - Square Edge † $57.05

404777 3000 x 1200 - Square Edge † $63.40

404778 3600 x 1200 - Square Edge † $76.06

Versilux® LINING (9mm)

401878 2700 x 1200mm* $87.04

PineRidge® LINING (6mm) and ACCESSORIES

400373 2540 x 1198mm $45.10

400372 2700 x 1198mm $47.95

305780 TextureLine PVC Straight Jointer 2700mm $4.86

HardieGroove™ LINING (7.5mm)

400245 2700 x 1200mm $115.83

HardiePanel™ COMPRESSED SHEET (15mm)

400090 1500 x 900mm $88.19

400089 1800 x 900mm $105.85

400087 2400 x 900mm $143.52

400085 3000 x 900mm $176.43

400084 1500 x 1200mm $117.60

400083 1800 x 1200mm $141.12

400082 2100 x 1200mm $164.66

400081 2400 x 1200mm $188.17

400080 2700 x 1200mm $211.68

400079 3000 x 1200mm $235.20


400101 1500 x 900mm $102.56

400100 1800 x 900mm $122.01

400099 2400 x 900mm $163.09

400098 3000 x 900mm $205.15

400097 1500 x 1200mm $136.77

400096 1800 x 1200mm $161.19

400095 2100 x 1200mm $191.47

400094 2400 x 1200mm $215.06

400460 3000 x 1200mm $263.27


400461 2400 x 1200mm† $319.30

UNDERLAY SHEETS

403190 JH Ceramic Tile Underlay 6mm - 1800 x 1200 $102.56

400459 JH Vinyl and Cork Underlay 5mm - 1200 x 900 $122.01

HardieBrace™ SHEET (5mm)

400159 2440 x 925mm $23.81

400158 2725 x 925mm $26.61

400157 2440 x 1225mm $31.55

400156 2725 x 1225mm $35.24


HardieScreen™ LATTICE (6mm)

400254 Diamond - 2400 x 1200mm $101.58

400258 Square - 2400 x 1200mm $101.58

Artista® CLASSIC COLUMN

402874 195mm x 2750mm $262.80

402873 195mm x 4000mm $340.24

402876 250mm x 2750mm $323.03

402875 250mm x 4000mm $418.07

400552 345mm x 2750mm $468.22

400550 345mm x 4000mm $606.01

400593 425mm x 2750mm $657.57

400591 425mm x 4000mm $850.88

Artista® TAPERED COLUMN

402882 250 to 195mm x 2750mm $459.13

402912 345 to 250mm x 2750mm $705.61

Artista® COLUMN CAPITALS, BASES and ACCESSORIES

402867 195mm Bell $102.47

402868 195mm Cove $102.47

402866 195mm Ornate $168.62

402865 195mm Pencil Round $92.30

402850 195mm Quad $63.26

402860 195mm Twin $118.40

402871 250mm Bell $108.31

402872 250mm Cove $117.12

402851 250mm Ornate $186.23

402870 250mm Pencil Round $97.75

402852 250mm Quad $66.22

402869 250mm Twin $123.22

400570 345mm Ornate $227.98

400572 345mm Pencil Round $112.93

400611 425mm Ornate $442.71

400613 425mm Pencil Round $133.60

305577 Artista® Bracket 195mm overall diameter $133.60

305578 Artista® Bracket 250mm overall diameter $138.00

400568 Joiner Sleeve 345mm Flush $43.22

400569 Joiner Sleeve 345mm Rebated $91.82

400609 Joiner Sleeve 425mm Flush $51.55

400610 Joiner Sleeve 425mm Rebated $108.65

HardieBreak™ THERMAL STRIP

305612 HardieBreak Thermal Strip 43 x 12 x 2750mm $9.56

HardieWrap™ WEATHER BARRIER

305664 HardieWrap Weather Barrier 2.75 x 30m $156.76

HardieFire™ INSULATION

305790 HardieFire Insulation 560x1160x85mm 5pk $96.75

305791 HardieFire Insulation 420x1160x85mm 5pk $72.56



16.8 General Accessories


300653 James Hardie™ Fibreshears $1055.46

300660 HardieBlade™ Saw Blade 185mm diameter $182.65

303375 HardieBlade™ Saw Blade 254mm diameter $309.89

305532 HardieDrive™ Screw 32mm long $55.68

305533 HardieDrive™ Screw 40mm long $63.57

305529 HydrEpoxy® 501 (two-part epoxy, 2 litre set) $104.51

305535 James Hardie™ Base Coat 4kg tub $98.82

304491 James Hardie™ Base Coat 15kg bag $41.71

305536 James Hardie™ Top Coat 3kg tub $82.99

304493 James Hardie™ Top Coat 15kg tub $49.84

305564 James Hardie™ 75 x 75mm Colorbond® Corner Flashing 3000mm $28.34

305534 James Hardie™ Joint Sealant 300ml cartridge $16.27

305672 James Hardie™ Joint Sealant 600ml sausage $22.31

305542 James Hardie™ PVC Cap Mould for 4.5mm thick sheets 3000mm $4.17

305543 James Hardie™ PVC Cap Mould for 6mm thick sheets 3000mm $4.17

305554 James Hardie™ 45 x 45mm PVC Corner Angle Mould 3000mm $14.99

305544 James Hardie™ PVC External Corner Angle for 6mm thick sheets 3000mm $4.17

305545 James Hardie™ PVC Internal Corner Angle for 6mm thick sheets 3000mm $4.17

305552 James Hardie™ PVC Flashing Mould for 6mm thick sheets 3000mm $10.46

305538 James Hardie™ PVC Straight Jointer for 4.5mm thick sheets 2400mm $3.31

305541 James Hardie™ PVC Straight Jointer for 4.5mm thick sheets 3000mm $4.17

305546 James Hardie™ PVC Straight Jointer for 6mm thick sheets 3000mm $4.17

305576 James Hardie™ Score and Snap Knife $14.18

16.7 HardieDeck®


HardieDeck™ SYSTEM

404780 Decking Board 19 x 196 x 3000mm $49.88

305841 Double Winged Base Jointer Bag of 5 3000mm $44.40

305842 Snap-in top Strip Bag of 5 3000mm $51.23

HardieDeck™ OPTIONS

404781 Edging Board 19 x 196 x 3000mm $57.78

404782 Finishing Board 19 x 296 x 3000mm $71.00

305843 Wingless Express Jointer 3000mm $47.85

305844 Fascia Edge Cap 3000mm $61.47

305846 Slimline edge cap 3000mm $52.95

Painted in Pale Eucalypt®

TH

EN COLOUR

INSTALL

scyon™ and james hardie products - finlayson€¦ · section 16 scyon™ and james hardie ......

Documents