Screws provide the critical attachment

Steel and Aluminum Roofing Systems

Fasten Through Panel Screw TypesThe Tip Of The Screw Is Determined By The Substrate. Head

design and rubber washers provide weather tightness

Wood screw or wood grip screws have a common point designed to cut through the sheet steel and penetrate the wood decking

Tech screw or metal to metal screws have a driller point designed to cut through the steel sheet and penetrate steel decking or purlins

Standing Seam Concealed FastenerScrews Feature Flat Pancake Heads

Wood grip screws have a point that is designed to cut through the steel sheet and penetrate wooden decking

Metal fast screws have a driller point designed to cut through the steel sheet into metal decking or purlins

Panel Profiles for all projects

From nearly flat commercial applications to agricultural, industrial, and residential projects in all price ranges, architects, contractors, and investment minded homeowners look to metal roofing systems for practical time and money saving solutions.

Metal Roofing panel profiles for

nearly any roofing project

Corrugated

• Oldest mass produced profile• Strong• Installed all over the world• Protecting buildings from dog houses to million dollar

mansions in a variety of gauges

5-V Crimp

• Most popular panel profile to date• Durable: Metro Dade approved• Lightweight: easy to install, even heavier gauges• Mimics the appearance of standing seam Caution: prone to oil-canning

3’ Rib Panel

• Residentially friendly• Offered in colors to match most schemes• Our most economical roofing and siding system• Lightweight and strong

PBR and R Panel

• 26 gauge for roofing and economical 29 gauge for siding

• Perfect choice for low slope applications• Rated for open framing projects• Time tested strength and service in industrial

applications

3 Standing Seam profilesConcealed fastener systems

OLDEST METAL ROOFING PROFILE

Residential Commercial Commercial Favorite Snap lock side lap Mechanically 1” high rib 1 3/4” high rib seamed 2” high rib deck attachment floating clip floating clip

Stamped Aluminum Panels

•Lightweight, Strong, and Durable•Green, Renewable, and Economical•Varity of profiles from Wood to clay tile.

*Steel panels are stamped and either painted or coated with stone chips *Strong and Durable*Steel substrate protected by up to 4 layers of Protection

Stamped Steel Shingle, Slate, Wood, and Tile Panels

3 coatings and 2 paint finishes to protect in any

project location withthe best warranties in the industry

• Direct Fastener and Concealed Fastener metal roofing profiles are all offered in two or more of the following coating and finish options:

Galvanized

• Hot dip zinc bath• G90 for mill finish • G60 for painted finish• Economical coating for projects such as barns,

sheds, pump houses, etc…

• Carries no warranty against premature rust and corrosion

Galvalume/Acrylume• Hot dip zinc/aluminum bath• Acrylume coated steel has a sacrificial acrylic coating

to protect the aluminum through milling and shipping• Economical, lightweight, durable• Aluminum content provides excellent rust protection

translating into a limited 25 year warranty against red rust perforation.

• Developed to stand up to commercial requirements

• Cosmetics are not covered. May weather non-uniformly

Sil-Poly

Silicone polyester enamel based paint system applied on a galvanized steel substrate

• Wide variety of colors available to match almost any color scheme

• 35 to 45 year limited warranty with excessive chalk and fade protection the first ten years of service

Kynar / Hylar• Polymer resin based paint system applied on a

Galvalume coated steel or Aluminum substrate• Superior color retention and elements protection• 35 to 45 year limited finish warranty • Saltwater locations OK with Aluminum substrate!

Resin Embedded Stone Coating over a Galvalume Substrate

Unparalleled customer support

• Knowledgeable inside and outside sales staff• Fast answers to installation, product

specification, Code, and technical questions• Free plan take-off and estimating service, by

the manufacturer helps you close the sale• Free product knowledge seminars are

available• Call 904 509 7522