screen plate brochure
TRANSCRIPT
-
7/30/2019 Screen Plate Brochure
1/24
Perforated Screen PlateFOR ALL SCREENING APPLICATIONS
Proud Member of the National Stone, Sand & Gravel Association, Inc.
-
7/30/2019 Screen Plate Brochure
2/24
TYPES OF PERFORATIONS AVAILABLE
BarCenters
Size
SQUARE PERFORATIONSSTAGGERED
(Available in all sizes)
SQUARE PERFORATIONS
STRAIGHT LINES
(Available in most sizes)
ROUND PERFORATIONS
STAGGERED
BarCenters
HEXAGON PERFORATIONS
STAGGERED
Size
Slot Width Side Bar
Slot
LengthEnd
Bar
Side BarSlot Width
EndBar
Slot
Length
SLOTS
END STAGGER
SLOTS
STRAIGHT LINES
SLOTS
SIDE STAGGER
End
Bar
Slot
Length
Centers
Size
Bar
CentersSize
Bar
Centers
nters
-
7/30/2019 Screen Plate Brochure
3/24
The use of Perforated Screen Plateon vibrating screens is gainingwide acceptance as the superiorscreening surface.Our screens haveuniversal acceptance and are usedextensively in the aggregate and min-ing industries:
Crushed Stone Quarries
Clay, Asbestos & Gypsum
Sand & Gravel Plants
Lightweight Aggregates
Coal Preparation Plants
Barite
Slag Plants
Phosphate Rock
Iron Ore Mines
Copper Mines
Heat Treated
Perforated Screen PlateEXTRA LONG SCREEN LIFE Screens are Heat-Treated after
perforating, for hardness and
abrasion resistance.
Less plant shutdown time for
replacements.
Fewer screens to replace - less
inventory.
Less screen cost - per ton material
screened.
MORE ACCURATE SCREENING Perforations remain uniform.
Choice of Square.. Round...
Hexagonal... Slotted Perforations.
Heavy Plate Screen
EXCELLENT SCREENINGFREQUENCY The open area of perforated plate
is equal to wire coth.
Perforations are staggered in the
direction of the flow of material
being screened.
LESS CHANCE OF BLINDING Perforated Screen Plate insures
full clearance.
Perforations are slightly tapered.
Theyre wider at the bottom than
on the top.
EASIER TO PATCH
Avoid costly shutdowns in themiddle of work shifts.
Fabricated Screen for the
Paper & Pulp Industry
Metals AvailableHendrick H Quality Heat-
Treated Screen. Popular for
its tough wearing ability and
its moderate price. A minimum
of 85 Rockwell B Hardness
meeting with all ASTM
standards.
Also Available Hendrick H2L and AR 200
Steel providing a hardness
to handle very abasive jobs.
A.R. Steel applications wher
extreme abrasive conditions
exist. Hardness specification
i.e. heat treated 85B, AR200
H2L.
Alloys such as Hardox 400,
500, and T-1,XAR-15 for
extremely abrasive jobs.
Stainless Steel - Where scre
must stand corrosive elemen
Perforated Screens fit all types ofVibrating Equipment
-
7/30/2019 Screen Plate Brochure
4/24
Hendrick Perforated Screen Platevs. Woven Wire Screen
In comparing Perforated Screen Platewith woven wire screens, for use on
vibrating screens, the subject of openarea is often mentioned.A glance at the tables on the opposite
page will show that the open area ofHendrick Perforated Screen Platecompares very favorably with the open
area of wire.
Perforated Plate compared
with Woven Wire Screen
Cross section of a 2-inch square
perforated plate 1/2-inch thick with1/2-inch bar, and a 2-inch woven wirescreen with 1/2-inch rods.
A perforated plate has full clearance from top to bottom;consequently will not blind and maintains uniformity ofmesh. Area of bar between perforations is 0.234 squareinches.
Weight per square foot is 7.35 pounds.Open area 64%
A wire screen does not have the full clearance ofperforated plate. Area of bar between holes is 0.196square inches.
Weight per square foot is 6.86 pounds
Open area 64%
1/2" 1/2"2"
2 1/16"7/16" 7/16"
2" 1/2"
1/2" 2" 1/2"
1/2"
1/2
1/2
Perforated Plate with Impact Area
-
7/30/2019 Screen Plate Brochure
5/24
5/16
3/8
7/16
1/2
1/8
5/32
1/8
3/16
50.9
49.6
60.5
52.9
5/16
3/8
7/16
1/2
.135
.148
.162
.177
48.8
51.4
53.2
54.5
5/8
3/4
7/8
1
3/16
3/16
3/16
1/4
59.0
63.9
67.8
64.0
5/8
3/4
7/8
1
.192
.207
.225
1/4
58.5
61.4
63.3
64.0
1-1/8
1-1/4
1-3/8
1-1/2
1/4
1/4
1/4
5/16
67.0
69.5
71.7
68.5
1-1/8
1-1/4
1-3/8
1-1/2
1/4
5/16
5/16
5/16
67.0
64.0
66.5
68.5
1-3/42
2-1/4
2-1/2
3/83/8
3/8
7/16
67.870.9
73.4
72.4
1-3/42
2-1/4
2-1/2
3/83/8
7/16
7/16
67.870.9
70.1
72.4
2-3/4
3
3-1/2
4
7/16
1/2
1/2
5/8
74.4
73.5
76.6
74.8
2-3/4
3
3-1/2
4
7/16
1/2
1/2
5/8
74.4
73.5
76.6
74.8
COMPARISON STANDARD LIGHT SCREENS
5/16
3/8
7/16
1/2
5/32
3/16
5/32
3/16
44.4
44.4
54.3
52.9
5/16
3/8
7/16
1/2
.148
.162
.177
.192
46.0
48.7
50.7
52.2
5/8
3/4
7/8
1
7/32
1/4
1/4
3/8
55.0
56.3
60.5
52.8
5/8
3/4
7/8
1
.225
1/4
1/4
5/16
54.0
56.3
60.5
58.0
1-1/8
1-1/4
1-3/8
1-1/2
3/8
3/8
3/8
3/8
56.2
59.2
61.6
64.0
1-1/8
1-1/4
1-3/8
1-1/2
5/16
3/8
3/8
3/8
61.0
59.2
61.6
64.0
1-3/4
2
2-1/4
2-1/2
1/2
1/2
1/2
1/2
60.5
64.0
66.9
69.4
1-3/4
2
2-1/4
2-1/2
7/16
7/16
1/2
1/2
64.0
67.3
66.9
69.4
2-3/4
3
3-1/2
4
1/2
5/8
5/8
3/4
71.6
68.5
72.0
70.9
2-3/4
3
3-1/2
4
1/2
5/8
5/8
3/4
71.6
68.5
72.0
70.9
COMPARISON STANDARD HEAVY SCREENS
Size, SquarePerforation
BarWidth
%Open Area
Size, WiringOpening
WireDiameter
%Open Area
HENDRICKPERFORATED SCREEN PLATE WOVEN WIRE SCREENS
Size, SquarePerforation
BarWidth
%Open Area
Size, WiringOpening
WireDiameter
%Open Area
HENDRICKPERFORATED SCREEN PLATE WOVEN WIRE SCREENS
-
7/30/2019 Screen Plate Brochure
6/24
How to Order:
To specify Perforated Screen Platethe following informationis needed.
1. Quantity: State the number of perfo-rated screen plate of the same thickness,width, length, perforation and bars.
2. Thickness: Specify in inches or gauge
number.
3. Metal: State the type of metal required.
Steel Plate: For use in medium duty
applications.
Abrasion Resisting (AR)
Steel Plate: Applications whereextreme abrasive conditionsexist. Hardness specifications ie. heattreated 85B, AR 200, H2L or
Hardox 400 & 500.
4. Width: The width is the dimension ofthe Perforated Screen Plate that is per-pendicular to the flow of material beingscreened. Margins and tolerances should
be specified.
5. Length: The length is the dimensionof the Perforated Screen Plate that isparallel to the flow of material beingscreened. Margins and tolerances
should be specified.
Skid bars can be finished as an
intergral part of the perforated
plate. It makes an ideal combination
for heavy duty scalping
6. Perforation Hole Size & Shape:
Round, Square, Hexagon, Slots.
7. Arrangement of Perforations:
Staggered arrangement
(60o pattern) is the standard.
Perforations are normally staggered in the
direction of the flow of the material being
screened.
8. Bars: The bar is the metal
between perforations and is
measured at the point whereperforations are closest. Specify the width
of the bar.
Hook Flanges: For standard tension-
type vibrating screens, specify Hook
Flanges.
Bolt Holes: Submit a drawing showing
location, size and type of bolt holes.
Crowned Screens: If a screen plate isto be crowned, state the amount of the
crown measured at the centerline.
Screen Frame Protection:
Blanked areas can be engineered into
perforated area to protect screen support
decks.
Counter-sunk Bolt Hole
Example of a TypicalPerforatedScreen Plate Ord
12 Pieces Perforated Screen Pl
1/4 steel, 59 1/2 wide (outside
Hook Flanges) x 48 long 1 squ
perforations, staggered with 1/4
bars, with IPA #3 welded Hook
Flanges, crowned 1/2 heat-trea
to a minimum of 85B Rockwell
hardness
-
7/30/2019 Screen Plate Brochure
7/24
Standard Welded
Flange I.P.A. #3
WIDTH +0"
-1/4"
If bolt holes
are required
Submit Sketc
SIDEMARGIN
END MARGIN
END MARGIN
LENGTH
+0"
-1/4" D
irectionofFlow
ofMaterial
(FEED END)
(DISCHARGE END)(DISCHARGE END)
(FEED END)
WIDTH +0"
-1/4"
DirectionofFlow
ofMaterial
-1/4"
PERFORATED SCREEN PLATE
PERFORATED SCREEN PLATE
CROWNED
PERFORATED SCREEN PLATE WITH
STANDARD HOOK FLANGES
PERFORATED SCREEN PLATE WITHSTANDARD HOOK FLANGES
CROWNED
Standard Formed HookFlange I.P.A. #1
Standard Welded
Flange I.P.A. #2
Standard Formed HookFlange I.P.A. #4
Standard Welded
Flange I.P.A. #5
BarCenters
Size
SQUARE PERFORATIONSSTAGGERED
(Available in all sizes)
SQUARE PERFORATIONS
STRAIGHT LINES
(Available in most sizes)
ROUND PERFORATIONS
STAGGERED
BarCenters
HEXAGON PERFORATIONS
STAGGERED
Size
Slot Width Side Bar
Slot
LengthEnd
Bar
Side BarSlot Width
EndBar
Slot
Length
SLOTS
END STAGGER
SLOTS
STRAIGHT LINES
SLOTS
SIDE STAGGER
End
Bar
SlotLength
SW
Amount of Crown
Amount of Crown
1/4"TO11/4"
1/4
"TO1
1/4
"
45%
to60%
45%
to60%
45%
to
60%
45%
to
60% 1/4
"to1
1/4
"
Centers
Size
Bar
CentersSize
Bar
Centers
Centers
3/4" to 1 1/4"90
-
7/30/2019 Screen Plate Brochure
8/24
To specify Perforated Screen Platefor revolving screens, the followinginformation should be given:
1. Quantity: State the number of screensections required (see illustration below)
2. Thickness: Specify in inches or gaugenumber.
Steel - Use the U.S. Std. Ga. Table
Stainless Steel - Use the U.S. Std. Ga.Table
3. Metal:State the kind of metal required.
Steel Plate - Hard drawn steel forabrasion resistance and dependableservice.
Abrasion Resisting (AR)Steel Plate - Applications whereextreme abrasive and impact conditionsexist..Hardness specifications i.e. heat treated85B, AR 200, H2L.
4. Diameter: Specify the exactoutside diameteror the exact inside diameter
of the Perforated Screen Section ininches.
5. Length: Specify the length of thescreen section(see illustration below)
Tolerance of length of the
screen: plus 0 minus 1/4.
6. Perforation Size and Shape: See fig. #1 for perforations
that are available.
7. Arrangement of Perforations: Staggered arrangement (60o pattern)
is standard for Perforated Screen Platewhen used in revolving screens.
8. Bars: The bar is the metal betweenperforations and is measured at the point
where the perforations are closest. Specifythe width of the bar.
9. Segments: Specify number of seg-ments to each section. (See illustrationsbelow).
10.Method of Assembling PerforatedScreen PlateSegments to Make Sectionsand/or Cylinders:
(A) BUTT JOINTS - NOT FASTENED
(see Fig. #4). (B) BUTT JOINTS - STANDARD CLIPS
(see Fig. #5)
(C) BUTT JOINTS - STANDARDSTRAPS (see Fig. #6).
(D) LAP JOINTS - The std. lap
joint is 1 1/2 to 2(minimum lap 1-1/2)See Fig. #7.
11. Other information:If bolt holes for mounting toframe or specific margins arerequired, submit a sketch.
If slotted perforations arerequired and the arrangementof slots is important, indicate
whether the long dimension ofthe slots is parallel to the lengthof the screen section or is paralto the circumference of thescreen section.
Example of a TypicalSpecification for aPerforated Screen Cylinder
3 screen sections 3/16 steel60 O.D. x 48 long 1/2 roundperforations staggered 3/16 bars3 segments to the section butt joinnot fastened.
Note: For any screens not covered bythese specifications, contact Hendrick
-
7/30/2019 Screen Plate Brochure
9/24
3/32
1/8
5/32
3/32
1/8
5/32
1/8
5/32
3/16
-
-
-
3/16
1/4
5/16
3/16
1/4
5/16
1/4
5/16
3/8
-
9/32
11/32
3/8
1/2
5/8
3/8
1/2
5/8
1/2
5/8
3/4
7/16
9/16
11/16
3/4
7/8
1
3/4
7/8
1
7/8
1
1-1/4
13/16
15/16
1-3/32
1-1/8
1-1/4
1-1/2
1-1/8
1-1/4
1-1/2
1-3/8
1-1/2
1-3/4
1-1/4
1-3/8
1-5/8
1-3/4
1-7/8
2
1-3/4
1-7/8
2
2
2-1/4
2-3/8
1-15/16
2-1/16
2-3/16
2-1/8
2-1/4
2-1/2
2-1/8
2-1/4
2-1/2
2-1/2
2-3/4
3
2-5/16
2-1/2
2-3/4
2-5/8
2-3/4
3
2-5/8
2-3/4
3
3-1/8
3-1/4
3-1/2
2-7/8
3
3-5/16
3-1/8
3-1/4
3-5/16
3-1/8
3-1/4
3-5/16
3-3/4
3-7/8
4
3-7/16
3-9/16
-
3-1/2
3-3/4
4
3-1/2
3-3/4
4
4-1/4
4-1/2
4-3/4
3-7/8
4-1/16
4-3/8
4-1/4
4-1/2
4-3/4
4-7/8
4-1/4
4-1/2
4-3/4
4-7/8
5
5-1/4
5-1/2
5-3/4
4-5/8
4-7/8
5-1/8
5-3/8
5 5 6 5-1/2
Wire Cloth(Clear opening)
HENDRICK PERFORATED SCREENS
Square Round Hexagonal
7
MAUNFACTURERS STANDARD GAUGE OF STEEL PLATES
#14 #11 #10 3/16 1/4 5/16 3/8 1/2
.0747 .1196 .1345 .1875 .2500 .3125 .3750 .5000
S. GAUGE No.
r Thickness
DecimalThickness
APPROXIMATE SQUARE,ROUND & HEX EQUIVALENTS
-
7/30/2019 Screen Plate Brochure
10/24
5/32Sq. 3/32 39.1 121416
2.661.901.52
3/16Sq.
3/16Sq.
3/16Sq.
3/32
1/8
3/16
44.5
36.1
25.0
1416
101112
3/161011
1.731.39
3.593.192.79
5.874.213.74
7/32Sq. 1/8 40.5 1112
14
2.972.60
1.86
1/4Sq.
1/4Sq.
1/4Sq.
1/4Sq.
3/32
1/8
3/16
1/4
53.0
44.5
32.6
25.0
121416
1/43/161011
3/1610
1/43/16
2.061.471.17
5.664.343.122.77
5.283.79
7.655.88
17/64Sq. 11/64 36.8 3/16 4.96
9/32Sq. 5/32 41.2 3/16 4.62
5/16Sq.
5/16Sq.
5/16Sq.
1/8
5/32
3/16
50.9
44.4
39.1
101112
1/43/1610
101112
2.762.462.15
5.664.363.12
3.423.042.66
3/8Sq.
3/8Sq.
3/8Sq.
3/8Sq.
3/8Sq.
1/8
5/32
3/16
1/4
3/8
56.2
49.6
44.4
36.0
25.0
3/161011
3/1610
1/43/1610
3/85/161/43/16
3/8
34.32.462.19
3.942.83
5.664.363.12
9.808.156.535.02
11.50
7/16
7/16
7/16
1/8
5/32
1/4
60.5
54.3
40.4
1/43/161011
1011
1/43/16
9.808.156.535.02
9.808.15
9.808.15
1/2Sq.
1/2Sq.
1/2Sq.
1/2Sq.
1/2Sq.
1/2Sq.
1/8
5/32
3/16
1/4
3/8
1/2
64.0
57.9
52.9
44.4
32.8
25.0
101112
101112
1/43/1610
1/43/1610
3/85/161/4
1/2
9.808.156.53
9.808.156.53
9.808.156.53
9.808.156.53
9.808.156.53
9.80
9/16Sq.
9/16Sq.
3/16
1/4
56.3
47.7
1/43/1610
1/43/16
9.808.156.53
9.808.15
ALL STANDARD SPECIFICATIONS LISTED ARE MANUFACTURED IN ACCORDANCE WITH ASTM DESIGNATION E-454-80
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
-
7/30/2019 Screen Plate Brochure
11/24
5/8Sq.
5/8Sq.
5/8Sq.
5/8Sq.
5/8Sq.
5/8Sq.
5/32
3/16
7/32
1/4
3/8
1/2
64.0
59.0
55.0
51.2
39.1
30.9
1011
1/43/1610
3/1610
1/43/16
3/85/161/4
1/2
2.021.80
4.183.222.30
3.532.53
4.983.83
9.307.756.20
1.41
21/32Sq. 5/16 46.0 1/43/165.514.24
11/32Sq.
11/32Sq.
3/16
5/16
61.9
47.2
1/43/16
5/161/4
3.882.98
6.745.39
3/4Sq.
3/4Sq.
3/4Sq.
3/4Sq.
3/4Sq.
3/4Sq.
3/16
1/4
3/8
1/2
5/8
3/4
63.9
56.3
44.5
36.0
29.8
25.0
1/43/1610
1/43/1610
3/85/16
1/4
1/23/85/16
1/2
5/8
3.682.832.03
4.473.442.46
8.507.07
5.6613.06
9.798.15
14.30
19.10
3/16Sq.
3/16Sq.
1/4
5/16
58.4
52.2
1/43/16
1/43/16
4.253.27
4.883.75
SIZE % GAUGE OPENING BAR OPEN AREA STEEL WEIGHT
7/8Sq.
7/8Sq.
7/8Sq.
7/8Sq.
7/8Sq.
3/16
1/4
3/8
1/2
5/8
67.8
60.5
49.0
40.4
34.0
3/1610
1/43/1610
3/85/161/4
1/2
1/2
2.521.81
4.033.102.22
7.806.505.20
12.15
13.46
29/32Sq.
15/32 43.4 1/2
11.55
15/16Sq.
15/16Sq.
1/4
7/16
62.3
46.4
1/43/16
3/8
3.842.96
8.20
1Sq.
1Sq.
1Sq.
1Sq.1Sq.
1Sq.
3/16
1/4
3/8
7/161/2
5/8
71.0
64.0
52.8
48.644.4
37.8
3/16
5/161/43/16
3/85/161/4
3/81/23/85/16
1/2
2.27
4.593.682.82
7.226.024.82
7.8611.35
8.527.10
12.67
1-1/6Sq.
1-1/6Sq.
1/4
7/16
65.5
50.3
1/43/16
3/85/161/4
3.522.70
7.606.345.07
1-1/8Sq.
1-1/8Sq.
1-1/8Sq.
1/4
3/8
1/2
66.9
56.3
47.9
1/43/16
3/85/161/4
1/2
3.382.60
6.695.574.46
10.62
1-3/16Sq.
1-3/16Sq.
1/4
5/8
68.4
42.8
1/43/16
3/85/161/4
3.232.48
8.757.305.84
1-1/4Sq.
1-1/4Sq.
1-1/4Sq.
1-1/4Sq.
1/4
3/8
9/16
5/8
69.5
59.2
47.4
44.5
1/43/16
3/85/161/4
1/2
1/2
3.122.39
6.245.204.16
10.73
11.32
1-5/16Sq. 3/8 60.5 3/85/161/4
6.055.044.04
1-3/8Sq.
1-3/8Sq.
1-3/8Sq.
1-3/8Sq.
1/4
3/8
7/16
9/16
71.7
61.8
57.6
50.4
1/43/16
3/85/161/4
3/85/161/4
5/8
2.882.22
5.844.863.90
6.465.404.31
12.65
SIZE % GAUGE OPENING BAR OPEN AREA STEEL WEIGHT
Weight/sq. ft. in lbs. for steel.The weight per square foot givenin this catalog is subject to milltolerances.
-
7/30/2019 Screen Plate Brochure
12/24
1-7/16Sq.
1-7/16Sq.
3/8
11/16
62.4
45.6
1/23/85/16
5/81/23/8
7.665.754.80
13.8511.10
8.22
1-1/2Sq.
1-1/2Sq.
1-1/2Sq.
1-1/2Sq.
1-1/2Sq.
1/4
5/16
3/8
1/2
3/4
73.4
68.5
64.0
56.2
44.3
1/43/16
3/85/161/4
3/85/161/4
1/23/85/16
5/81/23/8
2.722.09
4.824.023.21
5.504.593.67
8.926.705.58
14.1011.35
8.53
1-5/8Sq.
1-5/8Sq.
1-5/8Sq.
1-5/8Sq.
3/8
1/2
5/8
3/4
66.0
58.6
52.5
47.0
3/85/161/4
1/2
3/85/16
5/8
3/4
5.204.343.47
8.43
6.275.26
12.10
16.20
1-3/4Sq.
1-3/4Sq.
1-3/4Sq.
1-3/4Sq.
3/8
1/2
5/8
3/4
68.0
60.5
54.2
49.0
3/85/161/4
1/23/85/16
5/81/23/8
3/4
4.904.083.26
8.056.055.03
11.709.357.00
15.60
1-7/8Sq.
1-7/8Sq.
1-7/8Sq.
1-7/8Sq.
3/8
1/2
5/8
3/4
69.4
62.5
56.0
51.0
3/8
5/161/4
1/2
5/8
3/4
4.68
3.903.11
7.65
11.20
14.90
2Sq.
2Sq.
2Sq.
2Sq.
3/8
1/2
5/8
3/4
71.0
64.0
58.0
53.0
3/85/161/4
1/23/85/161/4
5/8
3/4
4.443.702.96
7.355.504.583.68
10.70
14.90
2-1/8Sq.
2-1/8Sq.
2-1/8Sq.
2-1/8Sq.
3/8
1/2
5/8
3/4
72.5
65.6
60.0
55.0
3/85/161/4
1/23/85/161/4
5/8
3/4
4.223.502.81
7.055.284.403.52
10.20
13.75
2-1/4Sq.
2-1/4Sq.
2-1/4Sq.
2-1/4Sq.
3/8
1/2
5/8
3/4
73.4
66.8
61.0
56.0
3/85/161/4
1/23/85/161/4
5/8
3/4
4.063.382.70
6.755.054.213.37
10.50
13.50
2-3/8Sq.
2-3/8Sq
2-3/8Sq.
2-3/8Sq.
3/8
1/2
5/8
3/4
74.5
68.0
62.5
58.0
3/85/161/4
1/23/85/161/4
5/8
3/4
3.903.252.60
6.524.904.803.26
9.55
12.85
2-1/2sq.
2-1/2Sq.
2-1/2Sq.
2-/12Sq.
3/8
1/2
5/8
3/4
75.5
69.4
64.0
59.0
3/85/161/4
1/23/85/16
5/8
3/4
3.743.122.50
6.224.673.89
9.18
12.55
2-5/8Sq.
2-5/8Sq.
2-5/8Sq.
2-5/8Sq.
3/8
1/2
5/8
3/4
76.5
70.5
65.0
60.5
3/85/161/4
1/23/85/16
5/83/4
3.603.002.40
6.024.523.75
8.95
12.10
2-3/4Sq.
2-3/4Sq.
2-3/4Sq.
2-3/4Sq.
2-3/4Sq.
3/8
1/2
5/8
3/4
7/8
75.5
71.5
66.5
61.5
57.5
3/8
5/161/4
1/23/85/16
5/81/23/8
3/45/81/2
3/45/81/2
3.44
2.872.30
5.834.363.64
8.556.855.13
11.809.857.85
13.0010.85
8.66
2-7/8Sq.
2-7/8Sq.
2-7/8Sq.
2-7/8Sq.
1/2
5/8
3/4
7/8
72.5
67.5
62.5
59.0
1/23/85/16
5/81/23/8
3/45/81/2
3/45/81/2
5.624.213.50
8.306.654.96
11.509.587.65
12.5510.45
8.35
Weight/sq. ft. in lbs. for steel.The weight per square foot givenin this catalog is subject to milltolerances.
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SQUARE OPENINGS CONTINUED
-
7/30/2019 Screen Plate Brochure
13/24
3Sq.
3Sq.
3Sq.
3Sq.
3Sq.
1/2
5/8
3/4
7/8
1
73.5
68.5
64.0
60.0
56.0
1/23/85/16
5/81/23/8
3/45/8
1/2
3/45/81/2
13/45/8
5.414.053.37
8.056.424.82
11.009.20
7.35
12.2510.20
8.16
17.9513.4811.20
3-1/4Sq.
3-1/4Sq.
3-1/4Sq.
3-1/4Sq.
3-1/4Sq.
1/2
5/8
3/4
7/8
1
75.0
70.5
66.0
62.5
59.0
1/23/85/16
5/81/23/8
3/45/81/2
3/45/81/2
13/45/8
5.103.833.19
7.536.034.52
10.408.686.95
11.509.577.65
16.7512.5510.45
3-1/2Sq.
3-1/2Sq.
3-1/2Sq.
3-1/2Sq.
3-1/2Sq.
1/2
5/8
3/4
7/8
1
76.5
72.0
68.0
64.0
60.5
1/23/85/16
5/81/23/8
3/45/81/2
3/45/81/2
13/45/8
4.803.603.00
7.155.714.28
9.808.176.53
11.009.187.35
16.1012.1010.05
3-3/4Sq.
3-3/4Sq.
3-3/4Sq.
3-3/4Sq.
5/8
3/4
7/8
1
73.5
69.5
66.0
62.5
5/81/23/8
3/45/81/2
3/45/81/2
13/45/8
6.765.414.05
9.357.786.23
10.458.686.95
15.3011.50
9.55
4Sq.
4Sq.
4Sq.
5/8
3/4
7/8
75.0
71.0
67.5
5/81/23/8
3/4
5/81/2
3/45/81/2
6.375.103.83
8.88
7.405.92
9.958.306.63
4Sq.
4-1/2Sq.
4-1/2Sq.
4-1/2Sq.
4-1/2Sq.
1
3/4
7/8
1
1-1/8
64.0
74.0
70.5
67.5
64.0
13/45/8
3/45/81/2
3/45/8
1/213/45/8
13/45/8
14.7011.009.18
7.956.645.30
9.057.50
6.0213.30
9.358.30
14.7011.00
9.18
5Sq.
5Sq.
5Sq.
5Sq.
5Sq.
3/4
7/8
1
1-1/8
1-1/4
76.0
72.5
69.5
66.5
64.5
3/45/81/2
3/45/81/2
13/45/8
13/45/8
13/45/8
7.356.124.90
8.427.005.60
12.429.357.75
13.6710.258.54
14.7011.00
9.18
5-1/2sq.
5-1/2Sq.
5-1/2Sq.
5-/1/2Sq.
7/8
1
1-1/8
1-1/4
74.5
71.5
69.0
66.5
3/45/81/2
3/45/8
3/45/8
3/45/8
7.806.505.20
8.757.25
9.507.90
10.258.55
6Sq.
6Sq.
6Sq.
1
1-1/4
1-1/2
73.5
68.5
64.0
3/4
5/83/45/8
3/45/8
8.12
6.76
9.658.05
11.009.20
6-1/2Sq.
6-1/2Sq.
6-1/2Sq.
1-1/4
1-1/2
2
70.5
66.0
58.5
3/45/8
3/45/8
3/45/8
9.057.54
10.408.66
12.7010.60
7Sq.
7Sq.
7Sq.
1-1/4
1-1/2
2
72.0
67.8
60.5
3/45/8
5/85/8
3/45/8
8.587.15
9.868.24
12.0510.05
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SQUARE OPENINGS CONTINUED
-
7/30/2019 Screen Plate Brochure
14/24
1/16Rd.
1/16Rd.
3/64
1/16
33.3
22.5
161820
161820
1.671.331.00
1.941.551.16
3/32Rd.
3/32Rd.
1/16
3/32
33.6
23.3
141618
141618
2.071.661.33
2.401.921.53
1/8Rd.
1/8Rd.
1/8Rd.
1/16
3/32
1/8
41.6
30.5
23.3
121416
111214
111214
2.551.821.46
3.473.042.17
2.823.352.40
5/32Rd.
5/32Rd.
3/32
5/32
34.9
22.5
10111214
101112
3.663.252.852.03
4.353.873.38
3/16Rd.
3/16Rd.
3/16Rd.
3/16Rd.
1/16
7/64
1/8
3/16
53.0
37.5
32.8
22.5
16
18
3/16101112
3/161011
3/161011
1.17
.94
4.903.523.122.73
5.263.783.36
6.084.363.88
7/32Rd.
7/32Rd.
7/32Rd.
3/32
1/8
5/32
44.0
36.5
31.0
1011
1011
3/161011
3.142.80
3.563.17
5.403.883.45
1/4Rd.
1/4Rd.
1/4Rd.
1/8
3/16
1/4
40.2
29.6
22.5
1/43/161011
1/4
3/1610
1/43/16
6.104.703.362.98
7.17
5.523.96
7.905.93
9/32Rd.
1/8
43.3
1/43/161011
5.784.453.192.83
5/16Rd.
5/16Rd.
5/16Rd.
5/16Rd.
5/16Rd.
1/8
5/32
3/16
7/32
5/16
46.7
40.3
35.3
31.3
22.7
12
1/43/1610
3/1610
1/4
5/161/43/16
2.33
6.084.683.36
5.073.64
7.00
9.857.886.06
11/32Rd.
11/32Rd.
5/32
3/16
42.7
37.9
1/43/1610
1/43/1610
5.844.503.22
6.344.873.50
3/8 Rd. 1/8 51.0 1/43/161011
5.003.842.762.45
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
ALL STANDARD SPECIFICATIONS LISTED ARE MANUFACTURED IN ACCORDANCE WITH ASTM DESIGNATION E-674-80
i
ROUND PERFORATIONS
STAGGERED
Centers
i
l i i
l
il i
l
l
i
Size
Bar
CentersSize
-
7/30/2019 Screen Plate Brochure
15/24
3/8Rd.
3/8Rd.
3/8Rd.
3/8Rd.
3/16
7/32
1/4
3/8
40.3
36.2
32.7
22.7
5/161/43/1610
5/16
5/161/43/16
3/85/16
1/4
7.616.104.693.36
8.13
8.587.075.28
11.809.85
7.88
13/32Rd. 7/32 35.5 1/43/16
6.585.06
7/16Rd.
7/16Rd.
7/16Rd.
7/16Rd.
3/16
1/4
5/16
7/16
44.5
36.7
30.9
22.7
1/43/16
1/43/16
5/161/4
3/85/161/4
5.664.35
6.454.96
8.807.04
11.809.857.90
15/32Rd. 9/32 35.4 5/161/43/16
8.246.584.93
1/2Rd.
1/2Rd.
1/2Rd.
1/2Rd.
3/16
1/4
3/8
7/16
48.0
40.3
29.6
25.7
1/43/1610
5/161/43/16
3/85/161/4
1/43/85/161/4
5.303.982.92
7.656.124.59
10.788.967.18
15.1011.31
9.437.55
9/16Rd.
9/16Rd.
3/16
5/16
51.1
37.6
1/43/1610
3/85/161/43/16
5.003.752.75
9.567.976.384.78
5/8Rd.
5/8Rd.
5/8Rd.
3/16
1/4
3/8
53.6
46.2
35.3
1/43/1610
5/161/43/16
1/23/85/161/4
4.753.562.67
6.825.464.09
13.209.878.226.58
11/16Rd.
11/16Rd.
11/16Rd.
1/4
5/16
7/16
48.5
42.7
33.8
1/43/16
8.767.31
5.844.38
10.12
5.253.94
8.767.31
5.844.38
10.12
3/4Rd.
3/4Rd.
1/4
3/8
50.8
40.4
5.003.75
11.349.137.606.10
5.003.75
11.349.137.606.10
13/16Rd.
13/16Rd.
3/16
5/16
59.8
47.3
3.15
3/1610
3.15
4.052.96
13/16Rd. 3/8 42.4
1/23/85/161/4
11.758.807.355.86
7/8Rd.
7/8Rd.
7/8Rd.
7/8Rd.
1/4
3/8
5/8
7/8
54.7
44.5
30.9
22.7
1/43/16
3/85/161/4
1/2
3/4
4.593.44
8.497.075.66
14.10
23.65
15/16Rd.
15/16Rd.
5/16
7/16
50.7
42.0
5/161/43/16
1/23/85/161/4
6.255.003.75
11.828.867.395.91
1Rd..
1Rd.
1Rd.
1/4
3/8
1/2
58.0
48.0
40.3
1/43/16
1/23/85/161/43/16
5/81/23/85/161/4
4.283.22
10.607.956.645.304.08
15.2012.309.187.656.12
1-1/16Rd. 3/8
49.7 5/161/4
6.415.13
1-1/8Rd.
1-1/8Rd.
3/8
1/2
51.0
43.4
5/161/43/16
5/81/23/85/161/4
6.255.003.79
14.4211.528.657.205.76
1-1/4Rd.
1-1/4Rd.
1-1/4Rd.
5/16
3/8
1/2
58.0
53.6
46.2
5/161/4
3/16
1/43/16
3/41/23/85/161/4
5.364.28
3.22
4.693.62
16.4510.908.196.825.46
1-3/8Rd.
1-3/8Rd.
1/4
1/2
64.9
48.7
1/43/1610
5/161/43/16
3.582.751.96
6.505.204.00
1-1/2Rd.
1-1/2Rd.
1-1/2Rd.
1/4
3/8
1/2
66.6
57.5
51.0
1/43/16
3/85/161/4
5/161/43/16
3.422.56
6.435.364.28
6.245.003.82
1-5/8Rd.
1-5/8Rd.
3/8
5/8
60.0
43.6
5/161/43/16
5/161/43/8
5.104.083.14
14.3811.508.61
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
Weight/sq. ft. in lbs. for steel.The weight per square foot givenin this catalog is subject to milltolerances.
ROUND OPENINGS CONTINUED
-
7/30/2019 Screen Plate Brochure
16/24
1-3/4Rd.
1-3/4Rd.
1-3/4Rd.
1-3/4Rd.
1/4
3/8
1/2
5/8
69.4
61.7
54.8
49.3
1/43/16
3/85/161/4
3/41/23/85/161/4
3/45/81/23/8
3.112.33
5.904.913.93
13.819.186.895.744.59
15.5012.8910.30
7.73
1-7/8Rd.
1-7/8Rd.
3/8
5/8
63.051.1
5/161/43/16
5/81/23/85/16
4.723.782.82
12.5010.00
7.506.25
2Rd.
2Rd.
2Rd.
7/16
5/8
3/4
61.2
52.7
48.0
3/85/161/4
5/81/23/85/16
3/45/81/23/8
5.944.953.96
12.12
9.697.266.05
15.9013.2710.617.95
2-1/8Rd.
2-1/8Rd.
2-1/8Rd.
2-1/8Rd.
2-1/8Rd.
3/8
1/2
5/8
3/4
7/8
65.5
59.5
54.0
49.5
45.2
3/85/161/4
1/23/85/161/4
5/81/23/85/16
3/45/8
1/23/8
1/23/8
5.284.403.52
8.266.205.174.13
11.729.397.045.87
15.4512.89
10.317.73
11.168.38
2-1/4Rd.
2-1/4Rd.
2-1/4Rd.
2-1/4Rd.
3/8
1/2
5/8
3/4
66.5
60.5
55.5
50.6
3/85/161/4
1/23/85/161/4
3/81/23/85/16
3/45/8
1/23/8
5.134.273.42
8.066.055.044.03
11.359.086.815.67
15.0012.50
10.007.50
2-3/8Rd.
2-3/8Rd.
3/8
1/2
67.5
62.0
3/85/161/4
1/23/85/161/4
4.974.153.32
7.755.824.853.88
2-3/8Rd
2-3/8Rd.
2-3/8Rd.
5/8
3/4
15/16
57.0
52.5
46.5
5/81/23/85/16
3/45/81/23/8
1/23/85/16
10.978.776.584.59
14.5412.129.697.26
10.918.196.82
2-1/2Rd.
2-1/2Rd.
2-1/2Rd.
2-1/2Rd.
3/4
1/2
5/8
3/4
68.5
63.0
58.0
53.5
3/45/81/4
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
4.824.023.22
7.555.664.723.78
10.708.566.435.36
14.2211.88
9.487.12
2-5/8Rd.
2-5/8Rd.
2-5/8Rd.
2-5/8Rd.
3/8
1/2
5/8
3/4
69.5
64.0
59.0
55.0
3/85/161/4
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
4.673.893.11
7.355.514.593.67
10.488.366.285.23
13.7811.49
9.186.88
2-3/4Rd..
2-3/4Rd.
2-3/4Rd.
2-3/4Rd.
3/8
1/2
5/8
3/4
70.5
65.0
59.9
56.0
3/85/161/4
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
4.513.763.01
7.145.354.463.57
.10.20
8.166.125.10
13.4811.21
8.986.73
2-7/8Rd.
2-7/8Rd.
2-7/8Rd.
2-7/8Rd.
3/8
1/2
5/8
3/4
71.0
66.0
61.0
57.0
3/85/161/4
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
4.443.702.96
6.945.214.343.47
9.957.965.964.97
13.1510.98
8.776.58
3Rd.
3/8 71.5 3/85/161/4
4.363.632.91
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
ROUND OPENINGS CONTINUED
-
7/30/2019 Screen Plate Brochure
17/24
3Rd.
3Rd.
3Rd.
1/2
5/8
3/4
66.5
62.0
58.2
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
6.845.134.273.42
9.697.755.824.85
12.8510.70
8.566.43
3-1/4Rd.
3-1/4Rd.
3-1/4Rd.
1/2
5/8
3/4
68.0
63.5
60.0
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
6.534.904.083.26
9.327.455.594.65
12.2410.20
8.166.12
3-1/2Rd.
3-1/2Rd.
3-1/2Rd.
3-1/2Rd.
3-1/2Rd.
1/2
5/8
3/4
7/8
1
69.5
65.5
61.5
58.0
54.6
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
3/45/81/2
1
6.224.673.893.11
8.807.055.284.40
11.809.827.855.90
12.8510.70
8.56
18.50
3-3/4Rd.
3-3/4Rd.
3-3/4Rd.
3-3/4Rd.
3-3/4Rd.
1/2
5/8
3/4
7/8
1
70.5
66.5
63.0
60.0
56.4
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
3/45/81/2
1
6.024.513.763.01
8.556.845.134.27
1.329.447.555.66
12.2410.20
8.16
17.80
4Rd.
4Rd.
4Rd.
4Rd.
4Rd.
1/2
5/8
3/4
7/8
1
71.5
68.0
64.5
61.0
58.0
1/23/85/161/4
5/81/23/85/16
3/45/81/23/8
3/45/81/2
1
5.824.363.632.91
8.166.534.904.08
10.889.057.245.43
11.939.957.96
17.12
4-1/4Rd
4-1/4Rd.
4-1/4Rd.
4-1/4Rd.
5/8
3/4
7/8
1
69.0
65.5
62.5
59.4
5/81/23/85/16
3/45/81/23/8
3/45/81/2
1
7.916.324.743.96
10.568.807.055.28
11.489.577.65
16.58
4-1/2Rd.
4-1/2Rd.
4-1/2Rd.
4-1/2Rd.
5/8
3/4
7/8
1
70.0
67.0
63.5
60.6
5/81/23/85/16
3/45/81/23/8
3/45/81/2
1
7.656.124.593.83
10.108.416.735.05
11.179.327.45
16.08
4-3/4Rd.
4-3/4Rd.
4-3/4Rd.
3/4
7/8
1
67.5
64.5
61.6
3/45/81/23/8
3/45/81/2
1
9.958.296.634.97
10.889.057.24
15.67
5Rd..
5Rd.
5Rd.
3/4
7/8
1
68.5
66.0
62.8
3/45/81/23/8
3/45/81/2
1
9.648.036.434.82
10.408.676.94
15.20
5-1/2Rd.
5-1/2Rd.
7/8
1
67.5
65.0
3/45/81/2
13/45/81/2
9.958.296.63
14.3010.70
8.937.14
6Rd.
6Rd.
1
1-1/4
66.5
62.0
13/45/81/2
13/45/81/2
13.6810.26
8.556.84
15.5011.62
9.697.75
6-1/2Rd.
6-1/2Rd.
1-1/4
1-1/2
64.0
60.0
13/45/81/2
13/4
5/81/2
14.7011.01
9.187.35
16.3212.24
10.208.16
7Rd. 1-1/2 61.5
13/45/81/2
15.7011.80
9.827.85
8Rd. 1-3/4 61.0 13/45/81/2
15.9011.93
9.957.96
Weight/sq. ft. in lbs. for steel.The weight per square foot givenin this catalog is subject to milltolerances.
ROUND OPENINGS CONTINUED
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
-
7/30/2019 Screen Plate Brochure
18/24
1/4Hex.
1/8
44.5 101112
3.122.792.42
9/32Hex. 1/8 47.9 101112
2.932.602.28
5/16Hex.
1/8
51.0 101112
2.762.452.14
3/8Hex.
5/32 49.8
101112
2.822.512.20
7/16Hex.
7/16Hex.
5/32
5/16
54.5
34.0
3/161011
1/43/16
3.572.562.27
6.735.18
1/2Hex. 3/16 52.9 3/161011
3.702.652.36
9/16Hex. 1/4 47.8 3/161011
4.102.932.60
5/8Hex.
5/8Hex.
3/16
1/4
59.0
51.2
3/1610
5/161/43/1610
3.212.30
5.754.983.832.74
11/16Hex. 1/4 54.1 1/43/1610
4.683.602.58
3/4Hex.
3/4Hex.
1/4
1/2
56.2
36.0
1/43/1610
1/43/16
4.463.442.46
6.525.02
13/16Hex. 1/4 58.4 1/43/1610
4.243.262.33
3/4Hex. 1/4 60.5 1/43/1610
4.033.102.22
7/8Hex. 5/16
49.0
5/161/43/1610
6.505.204.002.86
15/16Hex.
15/16Hex.
1/4
3/8
62.2
51.0
1/43/1610
3/85/16
3.852.962.12
7.496.24
1Hex.
1Hex.
1/4
3/8
64.2
53.0
1/43/1610
3/85/161/43/16
3.652.802.01
7.206.004.803.69
1-3/32Hex. 9/32
63.5
1/43/16
10
3.722.86
2.05
1-1/8Hex.
1-1/8Hex.
1/4
5/16
67.0
61.3
1/43/1610
3/85/16
3.402.591.85
5.924.93
1-3/16Hex. 5/16 62.7 5/161/43/16
4.753.802.92
1-1/4Hex.
1-1/4Hex.
5/16
3/8
64.0
59.0
5/161/43/16
5/161/43/16
4.953.672.82
5.234.203.22
1-5/16 Hex.
1-5/16Hex.
1/4
3/8
70.5
60.4
1/4
3/1610
3/85161/43/16
3.00
2.321.66
6.055.054.043.11
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
i
HEXAGON PERFORATIONS
STAGGERED
Size
Bar
Centers
Centers
-
7/30/2019 Screen Plate Brochure
19/24
1-3/8Hex.
3/8
1/4
61.8
3/85/16
1/43/16
5.854.87
3.903.00
1-7/16Hex. 3/8
1/4
48.3 3/85/16
1/43/16
7.906.60
5.284.05
1-1/2Hex. 7/16 60.0 3/85/161/43/16
6.125.104.083.14
1-5/8Hex. 3/8 66.0 3/85/161/43/16
5.204.353.472.66
1-3/4Hex. 1/2
60.5 1/23/85/161/4
8.056.035.034.03
1-7/8Hex. 3/8 69.2 3/85/161/4
4.713.933.14
1-15/16Hex. 3/8 70.4 3/85/161/4
4.533.773.02
2Hex.
2Hex.
2Hex.
3/8
1/2
3/4
71.3
64.0
52.9
3/85/161/4
1/23/85/16
3/45/81/2
4.403.652.93
7.355.504.60
14.4012.00
9.80
2-1/6Hex. 7/16 68.0 3/85/16
4.894.08
2-1/8Hex.
2-1/8Hex.
2-1/8Hex.
2-1/8Hex.
3/8
1/2
5/8
3/4
72.5
65.5
60.0
54.8
3/85/161/4
1/23/85/16
5/81/2
3/45/8
4.203.502.80
7.045.284.40
10.208.15
13.8011.50
2-3/16Hex.
2-3/16Hex.
2-3/16Hex.
1/2
5/8
3/4
66.5
60.0
55.7
1/23/85/16
5/81/2
3/45/8
6.845.134.27
10.208.15
13.5011.28
2-1/4Hex.
2-1/4Hex.
2-1/4Hex.
1/2
5/8
3/4
66.8
61.5
56.4
1/23/85/16
5/81/2
3/45/8
6.785.084.24
9.807.85
13.3511.12
2-5/16Hex. 1/2 66.9 1/23/8
6.755.06
2-3/8Hex.
2-3/8Hex.
1/2
5/8
68.0
62.4
1/23/8
5/81/2
6.554.90
9.587.66
2-3/8Hex. 3/4 57.4
3/45/8
13.0010.85
2-1/2Hex.
2-1/2Hex.
2-1/2Hex,
1/2
5/8
3/4
69.5
63.8
59.0
1/23/8
5/81/2
3/45/8
6.234.67
4.247.38
12.5010.45
2-3/4Hex.
2-3/4Hex.
2-3/4Hex.
1/2
5/8
3/4
71.6
66.5
61.8
1/23/8
5/81/2
3/45/8
5.804.35
8.556.85
11.709.75
2-13/16Hex.
2-13/16Hex.
2-13/16Hex.
1/2
5/8
3/4
71.8
67.0
62.0
1/23/8
5/81/2
3/45/8
5.754.30
8.436.74
11.609.70
2-7/8Hex.
2-7/8Hex.
2-7/8Hex.
1/2
5/8
3/4
72.4
67.4
62.6
1/23/8
5/81/2
3/4
5/8
5.644.22
8.326.65
11.45
9.54
3Hex.
3Hex.
3Hex.
1/2
5/8
3/4
73.5
68.4
63.8
1/23/8
5/81/2
3/45/8
5.404.05
8.056.45
11.109.23
3-1/4Hex. 5/8 70.3 5/8 7.57
3-5/16Hex.
3-5/16Hex.
3-5/16Hex.
1/2
5/8
3/4
75.6
71.4
66.5
1/23/8
5/83/16
3/45/8
4.973.75
7.305.84
10.228.54
3-1/2Hex.
3-1/2Hex.
3-1/2Hex.
5/8
3/4
7/8
60.4
56.8
53.5
5/81/2
3/45/8
3/45/8
10.108.10
13.2011.00
14.2011.85
3-3/4Hex. 3/4 69.4 3/45/8
9.367.80
3-7/8Hex.
3-7/8Hex.
3-7/8Hex.
5/8
3/4
7/8
74.0
70.2
66.6
5/81/2
3/45/8
3/45/8
6.645.30
9.127.60
10.258.50
4-3/8Hex.
4-3/8Hex.
4-3/8Hex.
4-3/8Hex.
5/8
3/4
7/8
1
76.7
72.9
69.8
66.2
5/81/2
3/45/8
3/45/8
3/45/8
5.944.75
8.30
6.909.257.70
10.328.62
6Hex. 1-1/4 68.5 3/45/8
9.648.03
Weight/sq. ft. in lbs. for steel.The weight per square foot givenin this catalog is subject to milltolerances.
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
SIZE % GAUGEOPENING BAR OPEN AREA STEEL WEIGHT
HEXAGONAL OPENINGS CONTINUED
-
7/30/2019 Screen Plate Brochure
20/24
BARS
SLOT SIZE TYPE
SIDE END %
OPEN AREA MAX.GAUGE STEEL WEIGHT
1/32 x 1/2
1/32 x 1/2
End Stagger
Side Stagger
.071 3/16
5/64 5/64
22.3
24.8
20
20
1.16
1.13
0.49 x 1/2
0.49 x 1/2
End Stagger
Side Stagger
.091 .171
.107 7/64
26.2
25.8
16
16
1.62
1.85
1/16 x 1/4
1/16 x 1/4
1/16 x 1/2
1/16 x 1/2
1/16 x 1/2
1/16 x 3/4
1/16 x 3/4
1/16 x 1
1/16 x 1-1/14
End Stagger
Side Stagger
End Stagger
Side Stagger
Side Stagger
End Stagger
Side Stagger
Side Stagger
End Stagger
3/32 5/32
3/32 5/32
1/8 5/32
1/8 5/32
3/16 3/16
1/8 1/8
1/8 1/8
3/16 3/16
1/16 .197
24.6
24.6
25.4
27.0
18.2
28.6
28.6
21.1
43.3
16
16
16
16
16
14
16
16
16
1.89
1.89
1.86
1.82
2.04
2.23
1.76
1.97
1.42
3/32 x 1/2
3/32 x 3/4
Side Stagger
End Stagger
3/32 3/32
3/32 3/16
42.2
38.9
14
12
1.81
2.67
1/8 x 1/2
1/8 x 1/2
1/8 x 3/4
1/8 x 3/4
1/8 x 1
1/8 x 1
1/8 x 1-1/2
1/8 x 1-1/2
End Stagger
Side Stagger
End Stagger
Side Stagger
End Stagger
Side Stagger
End Stagger
Side Stagger
1/8 .210
1/8 1/8
1/8 5/32
5/32 5/32
1/8 .210
5/32 5/32
1/8 17/64
5/32 5/32
34.3
40.0
41.3
36.8
41.5
38.5
42.5
40.3
11
11
10
11
11
12
11
12
3.24
3.00
3.30
3.16
2.92
2.68
2.88
2.62
5/32 x 1/2
5/32 x 5/8
5/32 x 3/45/32 x 3/4
End Stagger
Side Stagger
End StaggerSide Stagger
5/32 5/32
7/64 5/32
1/8 7/327/32 7/32
34.9
36.8
46.041.4
10
10
1110
3.66
3.55
2.703.25
11/64 x 3/4
11/64 x 3/4
11/64 x 1
11/64 x 1
End Stagger
Side Stagger
End Stagger
Side Stagger
5/32 7/32
5/32 1/8
7/32 5/32
7/32 5/32
43.4
43.4
36.1
36.1
10
10
11
11
3.18
3.18
3.20
3.20
3/16 x 1/2
3/16 x 1/2
3/16 x 9/16
3/16 x 3/4
3/16 x 3/4
Side Stagger
Side Stagger
End Stagger
End Stagger
Side Stagger
1/8 1/8
3/16 3/16
3/16 11/64
3/16 3/16
3/16 3/16
47.9
36.3
38.2
40.2
40.2
10
3/16
10
11
10
2.92
5.00
3.47
2.99
3.36
i
i
Slot Width Side Bar
Slot
LengthEnd
Bar
Side BarSlot Width
EndBar
Slot
Length
SLOTS
END STAGGER
SLOTS
STRAIGHT LINES
SLOTS
SIDE STAGGER
End
Bar
SlotLength
SlotWidth
SideBar
i i
-
7/30/2019 Screen Plate Brochure
21/24
Weight/sq. ft. in lbs. for steel.The weight per square foot givenin this catalog is subject to milltolerances.
BARS
SLOT SIZE TYPESIDE END
%OPEN AREA
MAX.GAUGE STEEL WEIGHT
3/16 x 7/83/16 x 13/16 x 1
3/16 x 1-1/43/16 x 1-1/23/16 x 1-1/23/16 x 1-1/23/16 x 1-1/2
Side StaggerEnd StaggerSide Stagger
Side StaggerEnd StaggerSide StaggerSide StaggerSide Stagger
3/16 3/163/16 11/643/16 3/16
1/8 3/163/16 15/641/8 3/163/16 3/163/32 3/16
41.042.542.0
52.043.253.144.457.5
103/163/16
103/16103/1610
3.314.504.55
2.704.452.634.362.49
7/32 x 5/87/32 x 3/47/32 x 1-1/2
Side StaggerEnd StaggerEnd Stagger
1/8 3/167/32 7/327/32 15/64
48.938.843.0
103/163/16
2.884.804.48
1/4 x 1/21/4 x 1/21/4 x 3/4
1/4 x 3/41/4 x 3/41/4 x 11/4 x 1
1/4 x 1-1/41/4 x 1-1/41/4 x 1-1/41/4 x 1-1/2
1/4 x 1-1/2
1/4 x 1-1/21/4 x 31/4 x 3
End StaggerSide StaggerEnd Stagger
Side StaggerSide StaggerEnd StaggerSide Stagger
End StaggerSide StaggerSideStaggerEnd Stagger
Side Stagger
Side StaggerEnd StaggerSideStagger
33.3 33.33/16 3/163/16 3/16
1/4 5/161/4 1/41/4 1/41/4 1/4
3/16 1/41/8 3/163/16 3/161/4 1/4
3/16 7/16
3/8 5/81/4 5/165/16 3/8
33.341.545.8
35.334.840.040.0
47.558.049.642.8
44.2
28.345.439.6
1/41/41/4
1/4103/161/4
1/4103/163/16
1/4
1/4101/4
6.805.965.52
6.803.684.706.12
5.332.363.954.49
5.707.303.07
6.15
5/16 x 1/25/16 x 15/16 x 15/16 x 1-1/2
5/16 x 1-1/25/16 x 35/16 x 3
Side StaggerEnd StaggerSideStaggerEnd Stagger
Side StaggerEnd StaggerSide Stagger
5/16 17/645/16 21/643/8 3/85/16 5/16
3/8 1/23/8 3/83/8 3/8
32.637.733.141.5
34.140.040.4
3/161/45/165/16
1/45/165/16
5.286.358.537.45
6.727.657.60
3/8 x 1/23/8 x 1/23/8 x 3/43/8 x 3/43/8 x 3/4
3/8 x 3/43/8 x 3/43/8 x 13/8 x 1
3/8 x 13/8 x 1-1/43/8 x 1-1/43/8 x 1-1/4
3/8 x 1-1/23/8 x 1-1/23/8 x 23/8 x 2
3/8 x 2-1/43/8 x 33/8 x 3
End StaggerSide StaggerEnd StaggerEnd StaggerSide Stagger
Side StaggerSide StaggerEnd StaggerEnd Stagger
Side StaggerEnd StaggerSide StaggerSide Stagger
End StaggerSide StaggerEnd StaggerSide Stagger
SideStaggerEnd StaggerSide Stagger
3/16 3/165/16 3/161/4 1/43/8 3/81/8 1/8
5/16 5/163/8 3/81/4 19/643/8 3/8
3/8 3/81/4 1/45/16 1/43/8 3/8
1/4 1/41/4 1/43/8 3/81/2 1/2
3/8 3/81/2 5/81/2 5/8
48.539.645.033.356.4
38.533.446.436.4
36.450.045.438.4
51.451.442.334.0
42.935.035.0
123/163/163/810
101/41/43/8
3/81/43/161/4
3/161/45/161/2
3/85/165/16
2.254.744.32
10.202.45
3.45
6.805.469.75
9.755.104.286.30
3.814.957.35
13.46
8.758.288.28
7/16 x 1-1/2
End Stagger
7/16 3/8
40.2
1/4
6.10
1/2 x 3/41/2 x 1
1/2 x 11/2 x 11/2 x 11/2 x 1-1/4
End StaggerEnd Stagger
End StaggerSide StaggerSide StaggerEnd Stagger
1/4 1/41/4 9/32
1/2 5/81/4 1/41/2 1/21/4 1/4
50.052.0
30.853.433.355.5
3/163/16
1/21/43/83/16
3.923.76
14.104.75
10.203.50
SLOTTED OPENINGS CONTINUED
-
7/30/2019 Screen Plate Brochure
22/24
BARS
SLOT SIZE TYPE
SIDE END %
OPEN AREA MAX.GAUGE STEEL WEIGHT
1/2 x 1-1/21/2 x 1-1/21/2 x 21/2 x 2
1/2 x 31/2 x 3
End StaggerEnd StaggerEnd StaggerSide Stagger
End StaggerSide Stagger
1/4 1/43/8 3/81/4 19/641/2 1/2
1/2 5/81/2 1/2
57.245.758.140.0
41.443.0
1/41/21/41/2
5/81/2
4.3611.07
4.2712.24
14.9411.60
9/16 x 1
9/16 x 19/16 x 1-1/29/16 x 1-1/2
End Stagger
Side StaggerEnd StaggerEnd Stagger
1/4 9/32
5/16 5/163/8 3/83/4 1-1/8
54.0
49.048.024.5
3/16
5/161/41/2
3.60
6.505.3015.40
5/8 x 3/45/8 x 1-1/4
5/8 x 1-1/25/8 x 1-3/45/8 x 25/8 x 2-1/4
5/8 x 2-1/45/8 x 2-1/45/8 x 3
End StaggerEnd Stagger
End StaggerEnd StaggerSide StaggerEnd Stagger
Side StaggerSide StaggerSideStagger
3/8 3/83/8 7/16
3/8 3/85/16 5/165/16 3/85/8 5/16
5/8 5/83/4 3/41/2 1/2
41.646.3
50.056.639.044.0
39.234.147.0
1/45/16
1/43/161/43/8
3/83/41/2
5.956.85
5.103.486.228.55
9.3020.1810.81
11/16 x 1-1/411/16 x 1-1/2
End StaggerEnd Stagger
3/8 3/83/8 3/8
49.651.6
1/41/4
5.144.94
3/4 x 13/4 x 13/4 x 1-1/43/4 x 1-1/4
3/4 x 1-1/23/4 x 1-1/23/8 x 1-1/2
3/4 x 23/4 x 23/4 x 3
End StaggerSide StaggerEnd StaggerSide Stagger
Side StaggerEnd StaggerEnd Stagger
End StaggerSide StaggerSide Stagger
3/8 3/83/8 3/83/8 3/83/8 3/8
5/8 5/83/8 1/25/8 5/8
3/8 3/81/2 1/21/4 1/4
48.548.551.351.3
38.050.038.5
55.248.040.0
3/83/81/43/8
5/81/25/8
1/41/23/4
7.887.884.967.45
15.8110.2015.70
4.5810.6018.36
13/16 x 1-1/2
End Stagger
3/8 3/8
54.9 3/16
3.54
7/8 x 1-1/47/8 x 1-1/27/8 x 1-3/4
End StaggerEnd StaggerEnd Stagger
3/8 3/87/16 7/167/16 7/16
53.951.653.4
1/41/41/4
4.704.944.75
1 x 1-1/21 x 1-1/2
1 x 21 x 21 x 21 x 2-3/4
1 x 31 x 3
End StaggerEnd Stagger
End StaggerEnd StaggerSideStaggerSide Stagger
Side StaggerEnd Stagger
1/2 1/211/16 11/16
3/8 7/161/2 1/23/8 3/83/8 3/8
1 11 1
50.040.6
59.953.461.464.0
37.037.0
5/165/8
3/85/163/81/4
11
6.3615.12
6.145.955.903.67
25.7025.70
1-1/8 x 2-1/41-1/8 x 3
End StaggerEnd Stagger
9/16 17/321/2 11/16
54.056.5
5/163/8
5.866.65
1-1/4 x 21-1/4 x 2-1/21-1/4 x 3
End StaggerEnd StaggerEnd Stagger
1/2 1/21/2 1/21/2 45/64
57.259.658.0
1/41/43/8
4.364.126.42
1-3/8 x 21-3/8 x 2-3/4
End StaggerEnd Stagger
5/8 5/85/8 5/8
52.456.2
3/83/8
7.306.71
1-1/2 x 31-1/2 x 3
End StaggerSide Stagger
5/8 3/45/8 5/8
56.558.4
3/41/2
13.318.50
1-3/4 x 31-3/4 x 3
End StaggerSide Stagger
1/2 1/21/2 1/2
66.666.6
1/21/2
6.806.80
2 x 42 x 4
End StaggerSide Stagger
7/8 7/87/8 7/8
57.257.2
3/43/4
13.1013.10
2-1/2 x 52-1/2 x 5
End StaggerSide Stagger
1 11 1
59.659.6
3/43/4
12.3812.38
3 x 43 x 4
End StaggerSide Stagger
1 11 1
60.060.0
3/43/4
12.2512.25
SLOTTED OPENINGS CONTINUED
-
7/30/2019 Screen Plate Brochure
23/24
Perforated Screen Plate is available
with a specially designed rubber
covering. Our rubber coated Screen
Plate ensures greater life; its ideal for
applications where extreme abrasive
conditions result in rapid wear.
Considerable research has devel-
oped a special vulcanizing system to
bond the rubber covering to the
steel... and keep it there for the life of
the screen! Both materials are
united under pressure to assure an
absolute lamination.
Some time-testedfeatures of our
Rubber-Clad Screens
Specially designed rubber coated
screen plates result in greater screen
life while sizing the most abrasive
products in the industry.
Due to the special attention given the
rubber-to-steel bonding,
Hendrick rubber coated screens
regularly outwear other screens by
up to 10 times! These are ideal
products for scalping, classifying, siz-
ing and wet screening.
Typical industries
where Rubber-Clad
screens are beingused sucessfully:
SAND AND GRAVEL PLANTSscalping,sizing and washing
CRUSHED STONE QUARRIES scalping,sizing and washing
COAL PREPARTIONS PLANTS
MINING AND PROCESSINGTaconite, Titanium, Barite, VermiculitePhosphate, copper and iron ore, etc.
Hendrick rubber coatedscreen plates are utilize
on processing equipmesuch as:
VIBRATING SCREENS
inclined as well as horizontal
TROMMELS-revolving screen
BALL MILLS -discharge scree
DEWATERING DECKS-
stationary screens
HEAVY MEDIA RECOVERYSCREENS
60-DuroRubber CladSteelSRB Abrasionresistant polymervulcanizedto steel
VeryGoodtoExcellent
Same Same 1/8to 3 Round
60 Black
45-DuroRubber CladSteelSpecificallycompoundednatural rubbervulcanizedto steel
Excellent Same Same 1/8to 3 Round
45 Red
TYPE OFCLADDING
SERVICE CONDITION
ABRASION RESISTANCE Identifying Perforation Color Wet Dry Impact Sizes Hardness ofScreening Screening Resistance Available (Durometer) Cladding
slightly taperedquieter operationeasy installation
-
7/30/2019 Screen Plate Brochure
24/24
NSFs Registration Program is accredited by the ANAB Accreditation Board.