scigiene microbiology catalogue · 2018. 7. 17. · atp-qd0010 0.1 ml sample for 1:10 dilution...

2

Table of Contents

Environmental Swab Collection System ...................................................................................................................................... 3

Sterile Cellulose Sponge ............................................................................................................................................................... 4

Labor-Saving Serial Dilution Device ............................................................................................................................................. 5

Disposable Sterile Buffer Bottles ................................................................................................................................................. 6

Hygiena EnSure ATP Luminometer .............................................................................................................................................. 7

Rapid E.coli & Coliform Detection Devices .................................................................................................................................. 8

Rapid Total Plate Count Detection Devices ................................................................................................................................. 9

Rapid Listeria Testing Devices ................................................................................................................................................... 10

Microbial DipSlides .................................................................................................................................................................... 11

Stomacher Machine ................................................................................................................................................................... 12

Blender Bags for Stomacher Machine ....................................................................................................................................... 13

Filter Bags for Stomacher Machine ........................................................................................................................................... 14

Full Sized Incubator .................................................................................................................................................................... 15

Autoclave with Built-In Water Tank .......................................................................................................................................... 16

Temperature & Pressure Datalogger for Autoclaves ................................................................................................................ 17

Hotplate & Magnetic Stirrer ...................................................................................................................................................... 18

Vortex Mixer/Bench Mixer ........................................................................................................................................................ 19

Water Activity Meter ................................................................................................................................................................. 20

Brix/Sugar Refractometer .......................................................................................................................................................... 21

Salt Water Refractometer .......................................................................................................................................................... 22

Micro Pipette .............................................................................................................................................................................. 23

Laboratory pH/ORP/ISE/Temperature Bench Meter ............................................................................................................... 24

High Precision Reference RTD Thermometers .......................................................................................................................... 25

Waterproof Precision RTD Thermometers ................................................................................................................................ 26

Pasteurization & Sterilization Waterproof Precision Dataloggers ........................................................................................... 27

HACCP Infra-Red Laser Thermometer & InfraRed Comparator Validation Cup ...................................................................... 28

Portable Light Meter .................................................................................................................................................................. 29

3

Environmental Swab Collection System

Increase productivity and efficiency while reducing lab costs by using Q-Swab for your environmental

monitoring needs. Q-Swab is a ready-to-use dilution and delivery device to be used in the food and beverage

industry for environmental surface sampling. Money and time are saved by eliminating the need for pipettes

and broth preparation. Each of the four broths offered in Q-Swab are self-contained in a 1.0 ml reservoir by

patented Snap-Valve™ technology. When the Snap-Valve™ is snapped, broth is released down the swab shaft,

neutralizing residual sanitizers and facilitating recovery of bacteria. The sample is then ready to be poured

onto dehydrated media or streaked onto agar plates for culturing. Q-Swab can be used either wet or dry to

sample environmental surfaces. Simply swab, snap and squeeze and a sample is ready for transport to the

laboratory.

Device Design: • Aseptically filled and gamma irradiated • All-in-one sample collection system • Easy to use • 1.0 ml fill of broth - perfectly hydrates dried media • 12 month shelf life • Comes with either wet or dry swab bud • 250 devices per case

Application: • Environmental microbial sample collection and transport

Benefits: • Saves money and time - no need to prepare broths or use pipettes

• Neutralizes residual sanitizers remaining on surface

Shelf Life: • 12 month at refrigerated temperatures (2-8°C)

Part Number Description Price (CAD$)

ATP-QS1200 Letheen Broth Medium Swabs(250/cs) $ 270.38

ATP-QS1000 Buffered Peptone Water Medium Swabs (250/cs) $ 270.38

ATP-QS1300 Stuart’s Medium Swabs (250/cs) $ 270.38

ATP-QS1400 Amie’s Medium Swabs(250/cs) $ 270.38

4

Sterile Cellulose Sponge

This sterile pre-moistened cellulose sponge with quick release handle is designed for sampling for

microbiological contamination on almost any surface. It is a convenient ready to use product, designed to

eliminate the costly, time-consuming steps of diluent preparation, sterilization and application to sampling

devices. Packaged in a sterile twirl - tie bag makes this an all-inclusive sampling system. Simply remove the

handle (sponge attached), collect sample, return to bag, release sponge into bag, twirl bag closed and send

to lab for analysis.

The added convenience of the quick release handle allows for the sponge to be released directly into the

twirl-tie bag after sample collection. Only the sponge goes back into the bag after sample collection

eliminating any unnecessary parts that may interfere with sample processing.

The Scigiene Cellulose sponge is pre-moistened with 10 mL Neutralizing Buffer, is attached to a quick

release handle and is Sterile.

Neutralizing Buffer assists in the recovery of microorganisms in samples taken from surfaces exposed to

sanitizing agents. It has the ability to inactivate the bactericidal and bacteriostatic effects of sanitizing agents

such as chlorine and quaternary ammonium compounds (Difco Manual).

DE Neutralizing Buffer assists in the recovery of microorganisms in samples taken from surfaces exposed to

sanitizing agents. It has the ability to inactivate the bactericidal and bacteriostatic effects of sanitizing agents

such as chlorine and quaternary ammonium compounds (Difco Manual). The medium also contains nutritive

agents which aid in the recovery and promote the growth of microorganisms.

Features:

• Ideal for surface sampling • Allows to reach hard-to-reach areas • Easier handling • One time use • Made to avoid sponge wedging • Plastic sponge handle with a strong grip • 100 units per case (10 packs of 10 units)


SS10NB Sterile Cellulose Sponge w/ Neutralizing Buffer (100/cs) $ 206.85

SS10DE Sterile Cellulose Sponge w/ DE Neutralizing Buffer (100/cs) $ 206.85

5

Labor-Saving Serial Dilution Device QD-Loop rapid dilution device is an all-in-one sterile system for accurate and convenient volumetric

dilutions. An accurate, calibrated loop comes attached to a reservoir where patented Snap-Valve™

technology holds 1.0 mL of Butterfields or Maximum Recovery Diluent (MRD) buffer. Simply break the Snap-

Valve after a sample is collected, and immediately a dilution is obtained that can be poured onto dry media

film or streaked onto an agar plate.

QD-Loop comes in 1:10, 1:100 or 1:1000 dilution formats. This all-in-one system allows the making of

dilutions quicker and more convenient.

Device Design: • All-in-one system

• Precise calibrated dilution loops

• Aseptically filled and gamma irradiated

• 12 month shelf life

• 250 devices per case

Key Features: • Snap-Valve™ technology

• Multiple calibrated loops

Application: • Perform serial dilutions of environmental bacteria samples or culture enrichments

• Use device to streak plates or hydrate dried culture media

Benefits: • No need to prepare dilution buffers

• No need to pipette

• Reduces labor and lab equipment expenses


Ideal for: • Dairy industry

• Water testing

• Laboratories

• Food & beverage processors


ATP-QD0010 0.1 ml sample for 1:10 dilution (250/cs) $ 243.34



6

Sterile Disposable Dilution Bottles for Foods & Pharmaceuticals Phosphate buffered (Butterfield's buffer). For foods, dairy products, and pharmaceuticals (APHA, FDA, AOAC

or USP methods). pH 7.2 ± 0.2. Contains purified water, monobasic potassium phosphate, and sodium

hydroxide for pH adjustment. Blow molded copolymer bottle; total capacity approximately 120 ml.

These disposable dilution bottles come fully prepared for immediate use. Fast and easy to use, they save

time and money. Pre-filled aseptically with sterile dilution water. Just open, insert the sample, close, shake,

and your sample is ready for analysis. The bottles are graduated, translucent copolymer with sterile

microbiological testing diluents for routine sampling of dairy products and pharmaceuticals.

Specifications: • Sold in cases of 72 bottles with 90ml or 99ml each

Storage: • Store at room temperature for up to 24 months when unopened

• Store for 4 weeks at 4°C when opened


ACP1690 Phosphate Buffer with Butterfields Case of 72 x 90ml $ 95.91

APC1689 Phosphate Buffer with MAG Chloride Case of 72 x 90ml $ 95.91

Other Medias and Concentrations Available Please contact us for more details

7

EnSure Luminometer – Multiple Quality Tests in One Instrument

EnSURE is a quality monitoring system that uses one instrument platform to collect, analyze and report data

from multiple quality indicators. Increased sensitivity for detection down to 0.1 femtomole of ATP when

using the Supersnap (ATP3000) swabs.

Key Functional Features: • Multiple Testes in one instrument • Results in 15 seconds • Sensitive – detects down to 0.1 femtomole

of ATP

• 20 programmable test plans • 250 programmable locations per test plan • Location name identification on screen • Programmable user identification • Stores 2000 results • Sure-Trend data analysis software

Key Design Features: • Protected USB connection so no moisture can get

into the system

• Removable read chamber allows for easy cleaning • Large viewable screen with backlight • Durable case design of use in the harshest

environments

• Sealed keypad is splash proof and can withstand the toughest of users

• Runs on 2 x AA batteries. Run thousands of tests before needing to change batteries.

• 7 button key pad is easy to navigate for any user

ATP Hygiene Monitoring UltraSnap and AquaSnap – ATP (Adenosine Triphosphate) is found in organic matter from all living

organisms and monitoring its levels on surfaces and in liquids is an ideal indicator of overall hygiene.

After cleaning or treating, all sources of ATP should be significantly reduced. When ATP is brought into

contact with the unique liquid-stable chemistry in the UltraSnap or AquaSnap testing device, light is

emitted in direct proportion to the amount of ATP present. EnSURE measures the amount of light

generated and provides instant feedback on the level on contamination.

Allergen Prevention and High Sensitivity SuperSnap is the most sensitive ATP test device. It is used where the highest standards of cleanliness are

required. Used in support of allergen control programs to verify the efficacy of cleaning procedures and

the removal of product residues that may contain potential allergenic material. It will detect product

residues down to 1 – 1000 ppm which is similar to the detection capabilities of specific allergen tests.

These swabs are not affected by 1000 ppm Hypochlorite and are 5 times more resistant to acid and 10

times more resistant to alkali.

Pathogen Detection The Micro-Snaps are a rapid test for enumeration of Coliforms, E.coli, and Total Plate Count. The 2 step

test uses a novel bioluminogenic test reaction that generates light when enzymes that are characteristic

of specific bacteria react with specialized substrates to produce light. The light generating signal is then

quantified in the EnSURE meter. Results are available in under 7 hours depending on required level of

sensitivity. Single figure organisms can be detected in 7 hours enabling Micro-Snap to give results in the

same working day or shift. **See next 2 pages for pricing**


ATP-205 Hygiena EnSure Luminometer Scigiene’s Exclusive Extended warranty

$ 1,569.75

ATP-3000 Supersnap Increased Sensitivity ATP Swabs (100/cs)(0.1 fmol ATP=1RLU) $ 252.00

ATP-2020 Ultrasnap ATP Swabs (100/cs) (0.5 fmol ATP=1RLU) $ 236.25

ATP-151/2 Free or Total ATP Water Test Device (100/cs) (0.5 fmol ATP=1RLU) $ 236.25

8

Rapid e.coli & Coliform Environmental/Product/Liquid Tests

The Micro-Snap Enrichment Swab is a rapid test for enumeration of Coliforms and E.coli. This is a 2 step

procedure and results are obtained in 7 hours. Swab a 10 x 10 cm area or prepare a suspension and transfer

to the Enrichment swab as per instructions and incubate for 7 hours. After incubation, transfer 100ul from

the Enrichment Swab to the fill line on the Detection Device (Part#: MS-CC100 for Coliforms or MS-EC100

for E.coli). Activate Detection Device with a snap and a squeeze. Incubate for 10 minutes at +37°C. Insert the

Detection Device into the SystemSure Plus or Ensure meter and interpret the results. The System uses a

novel bioluminogenic test reaction that generates light when enzymes that are characteristic of specific

bacteria react with specialized substrates to produce light. The light generating signal is then quantified in

our SystemSure Plus or EnSURE Luminometer. The EnSURE meter will only be AOAC approved.

Features & Benefits: • 100 swabs per case

• Self-contained devices provide ease of use

• Unique liquid-stable reagent provides high sensitivity and repeatability

• Uses proven conventional diagnostic properties

• Independent of sample effects

• No special sample preparation required

• 2 step procedure

• Simple pass/fail result at desired specification

• Quantitative result by kinetic measurement

• Results obtained between 4 - 7 hours

• Equivalent results to other cultural methods

• Low level detection (1 - 5 organisms)

• Repeat testing on same enrichment sample

• Faster quality assurance response and product release.

Applications Include: • Surface swabbing

• Raw material and finished product testing

• Solids, liquids and filterable products

• Food & Beverage; dairy, cosmetics & pharma and water

Note: Step 1 and either Step 2 are required along with EnSure Luminometer & Incubator for doing each test.


ATP-ES100 Microsnap E.coli Coliform Enrichment Swab –Step 1 (100/cs) $ 168.00

ATP-CC100 Detection Device for Coliforms – Step 2 (100/cs) $ 341.25

ATP-EC100 Detection Device for E.coli – Step 2 (100/cs) $ 367.50

ATP-205 EnSure Luminometer – will be AOAC Approved only for this model $ 1,569.75

TM4 Loud Alarm Timer $ 8.40

9

Rapid Total Plate Count Environmental/Product/Liquid Tests

This rapid bioluminogenic test provides detection and enumeration of total population of bacteria or total

contamination in a sample (down to 1 CFU), providing results in 7 hours. MicroSnap TOTAL consists of an

Enrichment Swab Device containing proprietary growth medium and a Detection Device containing

bioluminogenic reagents in which biomarkers produced by bacteria are measured using a small portable

luminometer. The two step test procedure requires a short incubation period to enhance the growth of

bacteria followed by the detection step. During incubation in the Enrichment broth, the number of bacteria

is increased and potential sample interference is reduced. As the bacteria grow they use up their available

food resources in the broth and generate enzymatic biomarkers, such that the greater the number of

bacteria, the higher the biomarker concentration after a set time interval. Subsequently, the biomarker

produced by living and growing bacteria is measured using a luminometer. The light output is directly

proportional to the concentration of biomarkers and number of bacteria present. A relationship between

biomarker concentration at a specific point and starting numbers of mixed bacteria can be established.

MicroSnap TOTAL can be used to test environmental surfaces, foodstuff, water and other filterable liquids.

The light generating signal is then quantified in our SystemSure Plus or EnSURE Luminometer. Only the

EnSURE meter will be AOAC approved.

Features & Benefits: • 100 swabs per case • Self-contained devices provide ease of use • Unique liquid-stable reagent provides high sensitivity and repeatability • Uses proven conventional diagnostic properties • Independent of sample effects • No special sample preparation required • 2 step procedure • Simple pass/fail result at desired specification • Quantitative result by kinetic measurement • Results obtained within 7 hours • Equivalent results to other cultural methods • Low level detection (1 organism) • Repeat testing on same enrichment sample • Faster quality assurance response and product release.

Applications Include: • Surface swabbing • Raw material and finished product testing • Solids, liquids and filterable products • Food & Beverage; dairy, cosmetics & pharma and water

Note: Step 1 and Step 2 are required along with EnSure Luminometer & Incubator for doing each test.


ATP-ENT200 Microsnap Total Enrichment Swab –Step 1 (100/cs) $ 147.00

ATP-APC200 Detection Device for Total – Step 2 (100/cs) $ 246.75

ATP-205 EnSure Luminometer – will be AOAC Approved only for this model $ 1,569.75

TM4 Loud Alarm Timer $ 8.40

10

Rapid Environmental Listeria Test

InSite is a quick and easy presumptive Listeria test that has been specifically designed to monitor presence

of Listeria in environmental samples from the food processing environment. The test contains a liquid media

formulated with antibiotics, growth enhancers, and color changing compounds specific to the growth of

Listeria species. A color change from yellow to light brown/black is considered presumptive positive.

Applicability of InSite is limited for selected common Listeria spp (Listeria monocytogenes, L. innocua, L.

ivanovii, and L.welshmeri) on selected common surface types.

Device Design: • Easy-to-use

• Snap-Valve™ technology - snap & squeeze

• Large 2.5 inch foam swab for maximum sample pickup

• Self-contained reagent

• Write-on swab label

• 50 or 100 tests per case

Key Features: • Presumptive positive results are available for the most common Listeria spp

in as little as 30 hours at levels as low as 1-10 CFU/ml.

• Compared to UVM and BLEB, provides superior/equivalent recovery and

faster detection of as low as 10-50 heat injured Listeria monocytogenes/ml

within ~24-30 hours of incubation.

• Provides higher level of selectivity and sensitivity for heat injured L.

monocytogenes under binary competition conditions compared to BLEB and UVM media.

• Self-contained test - no transfers minimizing the chance of contamination

• Only equipment required is a 37°C +/- 1° incubator or send to lab.

Benefits: • Cost-effective Test



ATP-150-100 InSite Listeria Test Swabs (100/cs) $ 472.50

11

Microbial DipSlides

These Microbial Dipslides were developed to provide an inexpensive, fast and simple method for detecting

microbial contamination in suspect liquids. Our Dipslides are double sided, enabling simultaneous

examination of test specimens with two different selective media.

For Coliforms, Salmonella & Shigella PLUS Total Plate Count Double sided – MacConkey Agar/Nutrient Agar with TTC - Part#: SB-MC100 (10 slides/box) A more selective modification of MacConkey medium which is suitable

for the detection and enumeration of Coliform organisms and also for

the detection and isolation of Salmonella and Shigella species occurring

in pathological and food specimens. Due to the inclusion of a specially

prepared fraction of bile salts in addition to crystal violet, the medium

give improved differentiation between Coliforms and non-lactose

fermenting organisms whilst Gram-positive cocci are completely

inhibited. The other side contains Nutrient Agar with TTC – see

description under General Purpose Agar.

For Yeast and Mould PLUS Total Plate Count Double Sided – Malt Extract Agar/Nutrient Agar with TTC – Part#: SB-MC600 (10 slides/box) This medium is recommended for the detection, isolation and enumeration of yeasts and moulds. For

mycological counts it may be desirable to prepare the more acid medium in order to suppress bacterial

growth. The other side contains Nutrient Agar with TTC – see description under General Purpose Agar.

Double Sided – Rose Bengal Agar/Nutrient Agar with TTC – Part#: SB-MC800 (10 slides/box) Rose-Bengal Chloramphenicol Agar is a selective medium for the

enumeration of yeasts and moulds from a wide variety of foodstuffs. The

medium has a neutral pH and chloramphenicol is used as a selective agent

to suppress the growth of bacteria. Several investigators have noted

advantages in the use of media at neutral pH containing antibiotics. Rose-

Bengal is taken up by mould and yeast colonies thereby assisting

enumeration of small colonies. Rose-Bengal also controls the size and

height of mould colonies, such as Neurospora and Rhizopus app. Over-

growth of slow growing strains by more luxuriant species is thus

prevented and plate counting is assisted. The other side contains Nutrient Agar with TTC – see description

under General Purpose Agar.

General Purpose Agar for Total Plate Count Double sides – Nutrient Agar with TTC (Triphenyltetrazolium Chloride) Part#: SB-MC660 (10 slides/box)

A general purpose Agar medium, containing two peptones, will support the growth of a wide variety of

organisms. It is suitable for the cultivation both of aerobes and anaerobes, the latter being grown either in

deep cultures or by incubation under anaerobic conditions. A small quantity of dye 2,3,5-

triphenyltetrazolium (TTC) is added. Aerobic bacteria species grow on this medium and they can be

detected by their ability to reduce TTC to a red colored formozan dye. Bacterial colonies appear as red dots

on the otherwise clear colorless medium.


SB-MC100 MacConkey Agar & Nutrient Agar with TTC (10/cs) $ 35.02

SB-MC600 Malt Extract & Nutrient Agar with TTC (10/cs) $ 35.02

SB-MC800 Rose Bengal Agar & Nutrient Agar with TTC (10/cs) $ 35.02

SB-MC660 Double sided Nutrient Agar with TTC (10/cs) $ 35.02

12

Stomacher Machine

Technical Specifications: • Process samples up to 80 ml

• Motor speed: 3.100 r.p.m.

• Reduction: 1:8

• Strokes/sec: 10

• Setting: digital timer

• Timer: 10/20/30 50/70/90 sec continuous mode

• Start / Stop: door activated

• Security: double on door

• Power: 110 V, 60 Hz, 50 W

• Dimensions: 15x15x30 cm

• (WxHxD) 5.9x5.9x11.8 in.

• Weight: 7 Kg/15.4lb


SCMST80 Masticator Compact Homogenizer 3 yr warranty

$ 5,500.01

SCMRK Stainless steel holder for 6 Stomacher bags (80 ml) $ 514.50

Other Models Available Please contact us for more details

13

Blender Bags for Stomacher Machine

SECURE-T Blender Bags provide a malleable yet durable and contaminant fee container for the even

blending of your samples. Uniform sample distribution ensures that your extraction is an accurate subset of

your original sample. Applications vary from general blending purposes to sample preparation for analysis

testing. Our new optional vertical write-on strip makes it easy to label the bag for storage and you can still

see the entire length of the contents. Now available with a vertical write-on strip.

Products Characteristics: SECURE-T product is available with standard 3 thousandths of an inch or optional 4 thousandths of an inch wall

thickness, made to handle the most robust blending applications. We use heat extruded virgin polyethylene tubing

which guarantees internal sterility and eliminates the need for side seals. In addition to superior wall strength,

SECURE-T blender bags have a patented sterile barrier tear-off top which ensures internal sterility right up until the

time of use. SECURE-T bags are available for all size blenders.


SCL-4060 Sample/Blender Bags (1000/cs)

Stomacher Bags for 80 ml Stomacher Machine $ 125.00

Other Sizes/Types Available Please contact us for more details

14

Filter Bags for Stomacher Machine

FILTRA-BAG Blender Bags are designed to simplify taking an aliquot when working with samples which

contain large amounts of residue and/or semi-solid/solid substances. When placing an aliquot onto growth

media, it’s very important that the volume of the aliquot be accurate and that it be free of solid particles.

This prevents pipette blockage as well as uneven plate distribution.

Features: • Designed for compact samples that need to be liquefied and strained

• Made with a polyethylene/nylon outer shell which practically eliminates the possibility of piercing the bag wall

during blending.

• The dividing filter membrane has 1840 holes per square inch with a pore size of approximately 330 microns

(µm). This pore size has proven to be very effective for the majority of applications and allows for optimal

solution and bacterial flow between the FILTRA-BAG compartments during blending.


Filtra-Bag with Tear-Off Protection Strip - Clear

SCT-4080A 80 series nylon, 0.013'/330 µm. PE filter 4” x 8” 265ml (400/cs) $ 261.00

Filtra-Bag with Safety Tabs – Clear – Closure with 1 round & 1 flat wire

EFT-4080A 80 series nylon, 0.013'/330 µm. PE filter 4” x 8” 265ml (400/cs) $ 275.00

Other Sizes/Types Available Please contact us for more details

15

Full Sized Incubator – up to 62°C

This incubator has a see-thru tinted acrylic door that enables the user to see the entire work space without

opening the door. Exterior is attractive ivory baked on enamel. Temperatures up to 62°C can be maintained

accurately and uniformly. The sensitive heat controller maintains temperatures to = 0.5°C., bi-metal

thermostat. Beakers, flasks, petri dishes and test tube trays can be processed at the same time. Chrome

plated adjustable shelf and fixed bottom shelf and lab thermometer are included. Extra shelves are optional.

Ideal product for clinical, industrial and school labs. Ideal for use in cultures, test kits, eggs and biologicals.

Technical Specifications: • Inside Dimensions: 12” W x 10” H x 10” D

• Outside Dimensions: 13” W x 15” H x 11” D

• Capacity: 0.7 cubic feet

• Type of Thermostat: Bi-metal

• Watts: 110

• Amps: 0.96

• Weight: 23 Ibs

• Maximum Temperature: 62°C/143.5°F


CE-160 Bench Top 0.7 Cubic Feet Incubator 18 month warranty

$ 561.75

Larger 2.0 Cubic Feet Model Available Please contact us for more details

16

Autoclave with built-in water tank

The 16 Liter Autoclave offers three cycle options (standard programs), which are pre-set for the sterilization

of liquids, wrapped instruments or unwrapped instruments/plastic ware.

• Fully Automatic; just press start

• Rapid, complete sterilization

• Extremely compact

• Built in water tank, does not require connection to an external water supply

Technical Specifications: • Chamber Volume: 16L

• Max. Pressure: 29 PSI/2Bar

• Chamber Dimensions: 9 X 13.75 in. / 17 X 31 cm

• Tray Dimensions: 6.5 X 10.75 in. / 16.5 X 27 cm

• Exterior Dimensions (WxDxH): 22 X 17.5X 15.7 in. / 56 X 44.5 X 40 cm

• Weight: 89 Lbs (40kg)

• Electrical: 115 or 230V, 50-60Hz, 1600W

• Warranty: 1 Year


BM-AL16 16 Liter Autoclave 1 year warranty

$ 4,226.25

17

Temperature & Pressure Datalogger for Autoclaves

The PressureDisk is a data logger for temperature and pressure monitoring designed specifically for use in

autoclaves since it can withstand temperatures of up to +140°C. It can be used with the TS Manager

software, compatible with FDA 21 CFR Part 11 regulations or with the Standard PressureDisk Software for

non-FDA applications. It can be used in combination with one or more temperature loggers. All can log up

to +140°C and resist up to 5 bar of pressure and can be used to map the entire autoclave for validation. All

devices are in food grade material and are submersible to also allow use in the Food Industry. PressureDisk

is rugged, with a replaceable battery. The temperature sensor is on a radial probe while the pressure

sensor can be inserted into a standard receptacle on autoclaves.

Features:

• Temperature Range: 0C to +140C • Temperature Resolution: 0.02C • Temperature Accuracy: +/- 0.2C • Pressure Range: 10 mbar ÷5000 bar absolute

(calibration: 10-4000 mbar)

• Pressure Resolution: 2 mbar • Pressure Accuracy: 15 mbar • Dimensions: Body - 35 mm (diameter) x 43 mm

(height), 11 mm threaded insert. Temperature Probe –

23 x 3 mm.

• Material: Food Grade Stainless Steel (AISI316L) • Number of Measurements: 60576 (date, time,

temperature & pressure)

• Measurement Intervals: From 1 second up • Battery Life: 2 years with 10 second intervals for 5

hours per day – User replaceable.

• Interface: USB Reader Station with Adapter.


TS-PD0200 PressureDisk +140C with NIST Traceable Calibration Certificate $ 2,205.00

TS0164 Disk Interface with Adapter for PressureDisk $ 288.75

TS0166 Software for Non FDA Applications, Download, Program, Graph & Export

$ 105.00

TS0165 FDA 21 CFR Part 11 Compliant Software $ 2,625.00

18

Hotplate & Magnetic Stirrer

This Hotpate-Stirrer features an exceptionally durable, chemical

resistant white ceramic work surface. The compact design, 7” x 8”,

makes it ideal for use where space is limited such as on benchtops

and inside of bio-hoods. The turn knobs allow quick, precise

adjustment and maintenance of speed and temperature. Safety

indicator LED’s on the front panel indicate when the heating and

stirring functions have been activated. With a 7.5” work surface, it is

compatible with a wide variety of popular sizes of borosilicate glass

beakers, flasks, bottles and other vessels. It comes complete with a

support rod for mounting thermometers and temperature probes.

Please see below for recommended accessories that enable you to

perform proper temperature calibrations of thermometers.

Technical Specifications: • Temperature Range: Ambient +5C to +380C • Speed Range: 60 to 1500 rpm • Platform: 7.5 x 7.5 inches (19 x 19 cm) • Control: Quick adjustment knob • Dimensions: 8 x 9 x 4.5 inches

• Electric Data: 120V, 60Hz


BM4000-HS Hotplate & Magnetic Stirrer

1 yr warranty $ 335.90

CM-CT00 Probe Holder for Support Clamp on Hot Plate $ 17.59

CMBKSS1200 Non-Graduated Stainless Steel Beaker $ 85.53

CMSBOT11 Magnetic Stir Bar $ 8.93

19

Vortex Mixer/Bench Mixer

This Bench Mixer provides smooth instant vortexing of even the largest

sample sizes, including full 50 ml tubes. The unique counter-balance system

creates maximum vortexing action, while minimizing noise and excessive

vibration. This results in quieter, more efficient and longer lasting

operation. Other features include “no walk” suction feet, cold

room/incubator compatibility and spill-proof electronic controls.

Technical Specifications: • Continuous or “touch” operation • Powerful motor for instant vortexing • Dynamic balancing system • Variable speed range: 200 to 3200 rpm • Operating Modes: Touch or continuous • Orbit: 3 mm • Operating Temp: +4°C to +65°C • Dimensions: 5 x 6.3 x 6.7 in (13 x 16 x 17 cm) • Weight: 8.4 Ibs (3.8 kg) • Electrical: 115V, 60Hz, 180W


BM1000 Vortex Mixer/Bench Mixer 2 yr warranty

$ 240.45

BM100-F Optional 3” Flat head attachment $ 23.10

CM1000-C Optional combination head for tubes and microplates 38 x 1.5/2ml, 28 x 0.5 ml or one microplate

$ 46.20

BM1000-H15 Optional Head for 12 x 1.5/2.0 ml, Horizontal $ 86.94

BM1000-H150 Optional Head for 4 x 15 ml tubes, Horizontal $ 86.94

BM1000-H500 Optional Head for 2 x 50 ml tubes, Horizontal $ 86.94

20

Water Activity Meter Water Activity meters measure the relative humidity which is reached at equilibrium in a

sealed container. It is the value measured when no net exchange of moisture between the product and the

sealed environment can take place. A full equilibration measurement can take up to 40 minutes and the

meters will automatically detect when equilibrium is reached.

Originally designed for government inspectors, the 4-inch PaWkit is a reliable water activity instrument for

use on-the-go. To make a measurement, flip back the sensor cover and fit the PaWkit over a standard

AquaLab sample cup. A push of a button brings an accurate reading within five minutes.

Pawkit owners include government inspectors, jerky manufacturers, small food companies, and production-

line QA managers, among others. The Pawkit is accurate to ± 0.02 aw , so it can only be used where a higher

accuracy is not critical.

Reasons for using the Pawkit: • Most affordable water activity instrument on the market.

• Spot checks and inspections away from the lab.

• Ease of use

• Portability


AW40515 Water Activity Meter

1 yr warranty $ 2,966.25

AW10106 Cup Sample w/ Lids (500/cs) $ 388.50

AWD40460 Verification Standards 0.760 aw (6.0M) $ 180.60

AWD40462 Verification Standards 0.250 aw (13.4M) $ 180.60

Specifications

Accuracy: ± 0.02 aw

Resolution: ± 0.001 aw

Range: 0 to 1.000 aw

Case Dimensions: 24.7 x 15.2 x 5 cm

(9.75 x 6 x 2 in)

Display: 6-digit LCD display with symbols

(3-digit aw, 3-digit temp.)

Measurement Time: 5 minutes

Operating Environment: 4 to 50°C

0 to 90% Humidity (non-condensing)

Sample Dish Capacity: 7 ml recommended (15 ml full)

Sensors: Dielectric humidity sensor.

Battery Life: 3 years (typical)

Warranty: One years, parts and labor

Weight: 115 g (4 oz)

21

Brix/Sugar Refractometer

This digital refractometer is an optical instrument that employs the measurement of refractive index to

determine the % Brix of sugar (MA871) in aqueous solutions.

The method is both simple and quick. Samples are measured after a simple user calibration with deionized

or distilled water. Within seconds the instruments measure the refractive index of the sample and convert it

to % Brix or % by weight concentration units.

The digital refractometers eliminate the uncertainty associated with mechanical refractometers and are

easily portable for measurements in the field.

The measurement technique and temperature compensation employ methodology recommended in the

ICUMSA Methods Book (Internationally recognized body for Sugar Analysis). Temperature (in °C or °F) is

displayed simultaneously with the measurement on the large dual level display along with icons for Low

Power and other helpful message codes.

Key features include: • Dual-level LCD

• Automatic Temperature Compensation (ATC)

• Easy setup and storage

• Battery operation with Low Power indicator (BEPS)

• Automatically turns off after 3 minutes of non-use


MA871 Brix Refractometer


SC-** Sucrose Calibration Solution 100ml

Accuracy: +/- 0.1%(Replace ** with the concentration of the solution); $ 100.00

Range 0 to 85% Brix

0 to 80°C / 32 to 176°F

Resolution 0.1% Brix

0.1°C/0.1°F

Accuracy ±0.2% Brix

±0.3°C/±0.5°F

Light Source Yellow LED

Measurement Time ~ 1.5 seconds

Minimum Sample

Volume

100 µL (covers prism

total)

Sample Cell SS ring and flint glass

prism

Temperature

Compensation

Automatic between 10

and 40°C / 50 to 104°F

Case Material ABS

Enclosure Rating IP 65

Battery Type 1 x 9V AA (included)

Battery Life 5000 readings

Auto-shut off After 3 minutes of non-

use

Dimensions 192 x 102 x 67mm

Weight 420 g

22

Refractometer for Salt Water

This optical instrument employs the measurement of the

refractive index to determine the salinity of natural and

artificial seawater, ocean water or brackish intermediates.

Samples are measured after a simple user calibration with

distilled or de-ionized water. Within seconds, the refractive

index and temperature are measured and converted into one

of three popular measurement units; Practical Salinity Units

(PSU), Salinity in parts per thousand (ppt), or Specific Gravity

(S.G. (20/20). All conversion algorithms are based upon

respected scientific publications using the physical properties

of seawater (not sodium chloride). The temperature (in °C or

°F) is also displayed on the large dual level display along with

helpful message codes. Specifications:

Additional Features & Specifications:

• Light Source: Yellow LED • Measurement Time: 1.5 seconds • Minimum sample volume: 100 μL (cover prism totally) • Sample Cell: Stainless Steel ring and flint glass prism • Automatic Temperature Compensation between +10C and +40C • Battery : 1 x 9V AA, 5000 reading battery life • Made from ABS plastic • Dual-level LCD • Easy setup and storage • Automatically turns off after 3 minutes of non-use • Size: 192 x 102 x 67 mm • Weight: 420 gram • Supplied with battery and instruction manual


MW-MA887 Digital Refractometer for Salt Water


SD-** Sodium Chloride Calibration Solution 100ml

Accuracy: +/- 0.1%(Replace ** with the concentration of the solution); $ 100.00

Range 0 to 50 PSU

0 to 150 ppt

1.000 to 1.114 S.G. (20/20)

0 to +80C / 32 to +176F

Resolution 1 PSU

1 ppt

0.001 S.G. (20/20)

0.1C/F

Accuracy +/- 2PSU

+/- 2 ppt

+/- 0.002 S.G. (20/20)

+/- 0.3C/0.5F

23

Micro Pipette

The perfect manual pipette for demanding laboratory

applications for scientists who prefer a traditional control

layout.

The Transferpette S pipettes were benchmarked against all

of the leading instruments, incorporating the best features

of each, to achieve an exceptional standard of comfort in a

traditional design. The Transferpette S offers robust yet

lightweight construction, superior autoclavability, simple

one-handed operation, high degree of accuracy and

precision, and Easy Calibration™ technology for long lasting

reliability. Available as fixed-volume and digital models in

volume ranges from 0.1uL to 10mL

Features: • Centralized pipetting button with optimized stroke length

• True one-handed operation

• Brake to help protect against accidental volume changes

• Always visible four-digit volume display

• Completely and repeatedly autoclavable at 121°C/250°F (20

minutes)


CM2704708 Single Channel 10ul Capacity Fixed Volume Pipettor


CMTPP1 Disposable Pipette Tips (1000/pkg) $ 35.18

Other Models Available Please contact us for more details

24

Laboratory pH/ORP/ISE/Temperature Bench Meter

This new pH/ORP/ISE/Temp bench meter is ideal for very accurate

and precise measurements for all laboratory needs. It can perform

ion-selective measurements directly in ppm, as well as pH, ORP and

temperature measurements. pH calibration can also be performed in

3 points selectable between 7 memorized buffers, to provide a very

accurate calibration curve even when testing different samples,

where very wide differences in pH can be found. Thanks to the

memory it can store up to 50 data sets for each range that can be

downloaded to a PC via RS232 or USB. • Range: -2.00 to 16.00 pH, 699.9 to 2000 mV, 0.001 to 19999 ppm, -

20.0°C to +120.0°C

• Resolution: 0.01 pH, 0.1 mV, 0.001 to 1 ppm depending on range, 0.1°C • Accuracy at +20°C: +/- 0.01 pH, +/- 0.2 mV, +/- 0.5% ppm full scale, +/-

0.4°C

• pH Calibration: 1, 2 or 3 point with 7 memorized buffers • ISE Calibration: 1 or 2 point with 6 standard solutions available • Relative mV offset: +/- 2000 mV • GLP feature, to view last calibration data for pH or ISE • Offset Calibration: +/- 1 pH, Slope Calibration: from 80 to 108% • Automatic Temperature Compensation from -20°C to +120°C or manual without temperature probe • pH Electrode & Temperature probe included • Operating Environment: 0 to +50°C, Max 95% RH • Input Impedance: 1012 Ohm • Power Supply: 12 VDC power adapter included • Dimensions: 230 x 160 x 95 mm, Weight: 1.1 kg • Supplied with: MW-SE-300 Double junction refillable pH electrode, MW-MA831R Temperature Probe, MW-

MA9315 Electrode Holder, MW-M10004 pH 4.01 Sachet Buffer Solution, MW-M10007 pH 7.01 Sachet Buffer

Solution, MW-M10010 pH 10.01 Sachet Buffer Solution, MW-M10016 Sachet Electrode Cleaning Solution, MW-

Mi5200 Application Software, MW-MA9350 RS232 connection interface w/2 meter cable, Graduate Pipet, 12 VDC

Adapter and Instruction Manual.


MW-Mi160-US pH/ORP/ISE/ºC BENCH METER,RANGE -2 TO 16 pH, ± 699.9 mV, ±2000 mV, 0.001 TO 19999 ppm, -20.0 to 120.0 ºC

$ 714.00

MW-SE-300 DOUBLE JUNCTION ORP PLATINUM ELECTRODE WITH 1 METER CABLE

$ 46.41

MW-MA917B/1

GLASS pH ELECTRODE, DOUBLE JUNCTION, REFILLABLE, BNC CONNECTOR, 1M CABLE

$ 125.84

MW-MA831R STAINLESS STEEL TEMP PROBE FOR MI150 / MI151 / MI160 $ 45.97

MW-MA9001 pH 1.68 BUFFER SOLUTION (220 ml) $ 10.71

MW-MA9004 pH 4.01 BUFFER SOLUTION (220ml) $ 8.03

MW-MA9007 pH 7.01 BUFFER SOLUTION (220ml) $ 8.03

MW-MA9010 pH10.01 BUFFER SOLUTION (220ml) $ 8.03

MW-MA9015 STORAGE SOLUTION FOR pH/ORP ELECTRODES (220ml) $ 8.03

MW-MA9016 CLEANING SOLUTION (220ml) $ 8.03

Other Laboratory & Portable Hand-Held Models Available

Please contact us for more details

25

High Precision Reference RTD Thermometers

These new revolutionary high precision RTD Thermometers are available as 2 different models and both

feature an accuracy of +/- 0.1°C with a 0.01°C resolution.

Features: • Data-logging model holds up to 16,000 data records

• Standard model has a 100 data record memory.

• Records Temperature, Time and Date of measurement

• High precision Platinum RTD sensor

• Automatic locked push/pull connector for easy

connection to your PC

• C/F selectable

• Large backlit LCD

• Dual display

• Max/Min function

• Data HOLD function

• Relative function

• Battery indication

• Auto Power-off

• User Offset adjustable

• Tilt Stand

Specifications: • Temperature Range: -100 to +400°C / -148 to +752°F

• Accuracy: +/- 0.1°C (0.2°F) or +/- 0.05% of reading, whichever

is greater

• Resolution: 0.01°C/F

• Precision Pt100 probe with 1.4 meter cable included

• 9V battery, instruction manual, carrying case and manual

included

• Software and USB cable included with model RD0376

• Dimensions; 185 x 65 x 36mm

• Weight; Approx. 360g


RD0375 Precision RTD Thermometer & 1 probe included $ 267.75

RD0372 Precision Datalogging RTD Thermometer & 1 probe included $ 309.75

CERT-3C 3-Point NIST Traceable Precision Temperature Certification of Probe Certification at -20°C, 10°C or 0°C, and 50°C – 50°C may be substituted to any temperature

up to 425°C at no additional cost $ 60.00

RD0376

RD0375

26

Waterproof Precision RTD Thermometers

These NEW waterproof RTD thermometers are extremely accurate and ideal for food plants or any other

application where a durable waterproof reference thermometer is required.

Features: • IP67 waterproof housing

• Platinum resistor temperature sensor, requires less

temperature compensation than thermocouple units.

• 4-digit LCD readout with LED backlight

• °C/°F switchable

• Min/Max/Avg functions

• Relative mode and Data Hold

• Low battery indication with auto power-OFF.

• Includes pointed 4.5” Stainless Steel RTD probe(s), batteries

and instruction manual

• Two channel model also available

Specifications: • Temperature Range: -100°C to +300°C (-148°F to +572°F)

• Resolution: 0.1°F/C

• Accuracy: 0.1% of reading plus 0.4°C (0.8°F)

• Temp. Coefficient: 28°C: 0.01% of reading plus

0.03°C (0.06°F)

• Sensor Types: Platinum resistance for Pt-100, Pt-500, Pt-1000

(4 wires) selectable

• Power Supply: 3 x 1.5V AAA alkaline batteries

• Battery Life: Approximately 100 hours

• Dimensions: 150 x 66 x 31 mm

• Weight: 175 grams


RD0370 RTD Thermometer with 1 channel & 1 probe included $ 135.45

RD0372 RTD Thermometer with 2 channels & 2 probes included $ 204.75

CERT-3C 3-Point NIST Traceable Temperature Certification of Probe Certification at -20°C, 10°C or 0°C, and 50°C – 50°C may be substituted to any

temperature up to 425°C at no additional cost $ 55.00

RD0370

RD0372

27

Pasteurization and Sterilization Waterproof Precision Dataloggers Waterproof Food Grade Temperature data logger for pasteurization and sterilization processed for food

cooking, cans and food packaging control.

Features: • High accuracy and precision as well as completely food grade and waterproof.

• “Cyl” main body diameter is only 15 mm and so it can fit both in narrow pasteurization tunnels and in bottle necks.

Available with external Probe of different diameters and lengths.

• Disk” model is presented in a circular housing, 36 mm in diameter and just 18mm high. Easy to position, even in

the tightest spaces or in more than one device when mapping temperature inside chambers. Available in two

versions: Disk alone or Disk with Probe.

• Fastening System for probes to be applied on cans, jars, lids for process monitoring.

• Printed reports can be used for health regulations and ISO compliance.

Specifications: • Material: Peek and stainless steel AISI316L (completely Food

Grade)

• Pasteurcyl/Pasteurdisk Temperature Range: -40°C to +100°C;

Sterilcyl/Sterildisk Temperature Range: -40°C to +140°C

• Accuracy: +/- 0.3°C with 5 point SIT* traceable calibration

certificate.

• Pasteurcyl/Sterilcyl:

Logger Body Size: 70 x 15 diameter (mm)

Standard Probe: from 20 to 125 X 3 diameter (mm)

Needle Probe: from 20 to 60 x 2.4 diameter (mm)

• Pasteurdisk/Sterildisk:

Disk Logger Body Size: 18 hh x 36 diameter (mm)

Disk Logger with Probe: 50mm x 4mm; 30mm x 4mm;

10mm x 4mm

• Resolution: 0.04°C

• Number of readings: 15000 Measurement Intervals: From 1

second to 255 minutes

• Battery Life: 2 years with standard use (replaceable)

• Software: SPD


TS-PCP0122C PasteurCyl Datalogger +100C Standard Probe: 3mm x 125mm; Includes 5-

Point NIST Traceable Certificate $ 682.50

TS-SCP0133C SterilCyl Datalogger +140C Standard Probe: 3mm x 125mm; Includes 5-Point

NIST Traceable Certificate $ 750.75

TS-PD0120C PasteurDisk Datalogger +100 No Probe; Includes 5-Point NIST Traceable Certificate

$ 498.75

TS-SD0130C SterilDisk Datalogger +140 No Probe; Includes 5-Point NIST Traceable Certificate

$ 572.25

TS0144 SPD Software and Interface Adaptor for Disk and Cyl Models $ 409.50

CYL Model

DISK Model

Custom Probes and Other Models Available Please contact us for cost and more details

28

HACCP Infra-Red Laser Thermometer This Laser Infrared Thermometer offer precise, non-contact measurement in a lightweight, handheld

instrument. With its one hand operation, this professional grade thermometer is designed to verify food

safety with advanced temperature processing that meets HACCP guidelines for accuracy. It also features

special detector and filtering for improved immunity to water vapor.

Features: • Factory Calibrated to NIST standards

• Uses the most affordable and available batteries: 2 AAA size, instead of the low capacity 9V battery

• Large bright amber color Backlit LCD Screen

• Auto Power Off and user C/F selectable.

Specifications: • Temperature Range: -55°C to +280°C (-67°F to +536°F) • Operating Range: 0°C to +50°C (+32°F to +122°F) • Accuracy: +/-1°C (0 to 65°C) • Resolution: 0.1°C/0.1°F • Repeatability @ 25C: 0.15°C • Repeatability @ 80C: 0.75°C • Response Time:1 second • D:S (Distance to Spot)12:1 • Emissivity Fixed at 0.97 • Update Frequency:1.4Hz • Size: 7.2 x 3.9 x 17.5 cm • Weight: 179 g • Wave Length: 8~14um • Power Supply: 2 x AAA • Special Features: Laser, Backlit

Validate Infra-Red Thermometers This Comparator provides a way of checking all InfraRed thermometers.

The InfraRed Comparator Cup provides a stable black body temperature.

The Comparator consists of an aluminum cup with a solid matte black

base, the base incorporates a 3.5 mm reference thermometer hole for

probe insertion. The Comparator can be used at any temperature within

the ambient range of the instrument to be tested. The information from

the reference thermometer can be used to compensate for minor

differences in the readings against the test instrument.


FI40L Professional IR Thermometer $ 102.90

TW814-132 InfraRed Comparator Cup $ 134.45

IRCert-3C 3-Point NIST Traceable Infra Red Thermometer Certification Certification at -20°C, 10°C or 0°C, and 50°C – 50°C may be substituted to any

temperature up to 425°C at no additional cost$ 85.00

29

Light Meter This portable Light Meter is designed to perform light measurements. With a Faster Micro Processor, this

device has a small, ergonomic and light case design. Other features include a large and easy to read LED

Display and long battery life.

This handy and ergonomically designed portable meter is ideal for anyone working on a low budget and still

requires fast and reliable measurements.

The portable design is suitable for a wide range of applications, such as Food, Agriculture and Horticulture,

as well as water and environmental analysis. The unit is supplied with a light sensor connected to the meter

that measures from 0 to 50000 Lux.

Average indoor lighting ranges from 100 to 1000 Lux and average outdoor sun lights about 50000 Lux. Lux

is a unit that indicates the density of light that falls on a surface.

The light is necessary for the development of the plants. In fact, it is necessary a sufficient contribution of

light in order to favor the photosynthesis and the closing of the plants. The supplement of light by means of

lamps electrical workers is the method simpler and economic in order to bring the necessary light to the

plants.

The human eye is sensitive only to blue, green, and red light, so in calculating the Lux falling on an object,

only the light that the human eye sees is counted. When only infrared light falls on an object, the Lux is

counted as zero since our eyes see nothing. Mathematically, a spectral weighting function becomes

convolved with the actual illumination spectrum to calculate Lux exactly.

This is the formal definition of Lux and it makes Lux an unusual unit of measure.

Still, Lux can be thought of as a way of measuring light in terms of what our eyes perceive. This is the metric

unit of measure for luminance of a surface. One Lux is equal to one Lumen per square meter.

One Lux equals 0.0929 foot candles.

Specifications: • Range: 0.000 to 1999 Lux

2000 to 19999 Lux

20000 to 50000 Lux

• Range Setting: Manual through key buttons

• Resolution: 1 Lux

10 Lux

100 Lux

• Accuracy: ±6% of reading ± 1 digit

• Peak Wave Length: 560 nm

• Sensor Type: Silicon Photodiode

• Sensor Sensitivity: 100 scotopic Lux

• Sensor Stability: ±2% change per year (in the first two years)

• Environment: 0 to 50°C / 32 to 122°F; max RH 95%

• Battery Type: 1 x 9V (IEC 6LR61) alkaline

• Battery Life: ~ 150 hours of continuous use

• Auto-off: After about 5 minutes of non-use

• Weight: ~ 270 g (meter with sensor)


MW700 Mfg. certificate of compliance Portable Light Meter - $ 87.02

MW700-Cert NIST Traceable Certification of Light Meter $ 235.00

scigiene microbiology catalogue · 2018. 7. 17. · atp-qd0010 0.1 ml sample for 1:10 dilution...

Documents