schunk new products and innovations · schunk gripper 5-finger gripping hand svh sectional diagram...

SCHUNK New Products and Innovations

Your SCHUNK

Smart FactoryIn touch with big data. Intelligent and connectable SCHUNK components already form the interface for communication between workpiece and machine for smart factory in terms of Industry 4.0.

HRC gripper competenceThe answer to the challenges of human/robot collaboration: The awarded SCHUNK Co-act Gripper JL1. In the future it will transmit all relevant process and environmental data to the control and production systems, and will communicate with humans.

Digital servicesSCHUNK components and services are playing an important role if you are going digital in production. Whether it is the webshop for additive manufactured gripper fingers, digital twins or digital services through networked components. We are “closest to the part.”

30 New productsThe highlights of SCHUNK gripping systems and clamping technology: among others, the new SCHUNK gripper PGN-plus-P – the world’s most proven gripper on the market. Lifelong maintenance-free. And TENDO Slim 4ax, the world’s first hydraulic expansion toolholder with standardized heat shrinking contour.

Everything from one SourceAs a leading supplier of technology equipment for robots and production machines, we offer more than 11,000 standard components of the world’s largest assortment of gripping systems and clamping technology.

schunk.com

Offers for Starter Kits and Loyalty CampaignsTake advantage of the promotional and benefit packages. Contact your SCHUNK consultant or our Customer Center for more information.

Tel. [email protected]

SCHUNK Gripper

SCHUNK Gripper 5-Finger Gripping Hand SVH

Pneumatic SCHUNK Gripper Universal Gripper PGN-plus-P

Pneumatic SCHUNK Gripper Centric Gripper PZN-plus-P

Electric SCHUNK Gripper Universal Gripper PGN-plus-E

ElectricSCHUNK Gripper Parallel Gripper EGL 90

Electric Linear Module Linear Module ELP

Electric Gripper Swivel Module Gripper Swivel Module EGS

Equippedby

Robot Accessories Angular Compensation Unit AGE-W

Robot Accessories Deburring Spindle FDB

Control Unit Controller ECM

Configuration

Configuration Digital Twin

Configuration SCHUNK Online Configurator

Configuration EPLAN

SCHUNK Your Personal Voucher

The new SCHUNK Technology Carrier for Collaborative Gripping

SCHUNK Gripper

Technical support and salesTel. +49-7133-103-3444 | schunk.com/Co-act

Grippers

never losea workpiece

Grippers

always detecthuman contact

Grippers

never cause injurieswhen gripping

The technology carrier SCHUNK Co-act gripper is based on three principles derived from the HRC standards on human/robot collaboration:

HRC Teamwork in Production Automation

Tactile Sensor Systemsfor in time detection and differentiation of workpieces and humans.

Capacitive Sensor Systemsfor the prevention of collisions.

CameraMounted between the fingers for detecting the surroundings, differentiating and searching for objects.

Touchscreenenables communication with the gripper as well as teaching or switching to various operating modes.

MM Award 2016at AUTOMATICA ShowSCHUNKCo-act Gripper JL1

Size Weight

1 1.3 kg

SCHUNK 5-Finger Gripping Hand SVH

The world’s first Gripper for collaborative Robots, which received the German Social Accident Insurance (DGUV) Certificate.

Technical support and salesTel. +49-7133-103-2893 | schunk.com/5-Finger-Gripping-Hand-SVH

SCHUNK Gripper 5-Finger Gripping Hand SVH

Sectional diagram1 Drive index finger, distal

for actuation of two axes

2 Drive index finger, proximal direct current motor with spindle drive

3 Anti-slip, elastic gripping surface made of rubber for firm hold

4 Integrated electronics for direct assembly to the robot arm

5 Thumb with two degrees of freedom for flexing and swiveling the thumb

4

5

2

1

3

Interface RS-485

Robot Operating SystemROS driver available.

DGUV Certificate for collaborative operation.

Integrated electronicsfor control in the wrist.

Sizes Weight Gripping force Stroke per finger

Workpiece weight

50 .. 125 0.17 .. 1.37 kg 220 .. 4,200 N 2 .. 13 mm 1.1 .. 15 kg

Sectional diagram1 Multi-tooth guidance

2 Base jaw

3 Mounting for sensor

4 Housing

5 Centering and mounting possibilities

6 Wedge hook principle

7 Piston drive

The new SCHUNK PGN-plus-P Gripper

The world’s most proven Gripper on the Market. Lifelong maintenance-free*

NEW: Up to 50% longer gripper fingersThe higher maximum moments of the perfected SCHUNK multi-tooth guidance enable use of longer gripper fingers.

NEW: Up to 50% higher gripping forcewith the enlarged surface of the drive piston.

Diverse accessoriesWide range of high-quality accessory components and matching sensor systems.

NEW: Lifelong maintenance-free*The perfected SCHUNK multi-tooth guidance with continuous lubricant pockets ensures even and permanent lubrication.

Patentierte Präzision!Patented Precision!VielzahnführungMulti-tooth guidance

* Under normal, clean operating conditions.

Technical support and salesTel. +49-7133-103-3888 | schunk.com/PGN-plus-P

12

4 5

3

6

7

Pneumatic SCHUNK Gripper Universal Gripper PGN-plus-P

Sizes Weight Gripping force Stroke per finger

Workpiece weight

50 .. 125 0.27 .. 3.34 kg 325 .. 8,450 N 2 .. 13 mm 1.65 .. 29 kg

Sectional diagram1 Housing


3 Sensor system

4 Multi-tooth guidance

The new PZN-plus-P 3-Finger Centric Gripper

Now NEW with Permanent Lubrication in the Multi-tooth Guidance. Lifelong maintenance-free.*


Technical support and sales Tel. +49-7133-103-3888 | schunk.com/PZN-plus-P

Pneumatic SCHUNK Gripper Centric Gripper PZN-plus-P

* Under normal, clean operating conditions.

NEW: Up to 50% longer gripper fingersThe higher maximum moments of the perfected SCHUNK multi-tooth guidance enable use of longer gripper fingers.

NEW: Up to 120% higher finger loadThe perfected multi-tooth guidance allows higher maximum moments due to the enlarged guide surface.

NEW: Lifelong maintenance-free*The perfected SCHUNK multi-tooth guidance with continuous lubricant pockets ensures even and permanent lubrication.

4

3

1

2

NEW: Up to 50% higher gripping forcewith the enlarged surface of the drive piston.

Size Weight Gripping force Stroke per finger

Workpiece weight

80 1.01 kg up to 570 N 8 mm up to 2.85 kg

Sectional diagram1 Multi-tooth guidance

2 Base jaw

3 Sensor system

4 Housing

5 Centering and mounting possibilities


7 Spindle nut

8 Drive

9 Control electronics

The new SCHUNK PGN-plus-E Gripper with IO Link

The world‘s first easy electric Gripper with Multi-tooth Guidance, IO Link and 24 V Drive.


Technical support and sales Tel. +49-7133-103-3888 | schunk.com/PGN-plus-E

Electric SCHUNK Gripper Universal Gripper PGN-plus-E

NEU: Up to 50% longer Gripper FingersThe higher maximum moments of the perfected SCHUNK multi-tooth guidance enable use of longer gripper fingers.

1

2

4 3 6 5

9

8

7

NEW: Lifelong maintenance-freeThe perfected SCHUNK multi-tooth guidance with continuous lubricant pockets ensures even and permanent lubrication.

Four-stage adjustable gripping forcefor easy adaption to sensitive workpieces.

24 V drive and control on option, via digital I/O or IO link class B connectionfor easy commissioning and quick integration into existing systems.

Size Weight Gripping force

Stroke per finger

Workpiece weight

90 1.8 kg 50 N .. 600 N 42.5 mm 3 kg

Sectional diagram1 Control electronics

2 Encoder

3 Electric brake

4 Drive

5 Kinematics

6 Service window

2-Finger Parallel Gripper EGL 90with Profinet

The first Gripper with certified Profinet Interface and integrated Control Electronics.

Technical support and sales Tel. +49-7133-103-3888 | schunk.com/Parallel-Gripper-EGL

ElectricSCHUNK Gripper Parallel Gripper EGL 90

5

4

2

3

1

6

Maximum Interface Flexibilityvia Profibus (up to 12 Mbits/s) and CAN bus (up to 1 Mbit/s). Profinet certification for ensured compatibility with industry standard.

Comfortable CommissioningInteractive online commissioning assistant for easy parameterization of the gripper hardware.

Compact GripperThe complete control and power electronics are integrated in the housing. Suitable for the use in decentralized systems.

Flexibly programmableFinger position, closing speed and gripping force (50 to 600 N) can be freely programmed within the maximum stroke of 42.5 mm.

Sectional diagram1 Roller guide

2 Drive


4 End position adjustability

5 Connecting plug

6 Modular design hole pattern

Linear Module ELP

The easiest electric Linear Module on the Market to adjust.

Technical support and sales Tel. +49-7133-103-3888 | schunk.com/Linear-Module-ELP

Electric Linear Module Linear Module ELP

Sizes Weight Stroke Nominal force

Repeat accuracy

25 .. 100 1.8 .. 8.3 kg 30 .. 200 mm 17 .. 104 N ±0.01 mm

12

3

4

5

Integrated control and power electronicsControl via digital I/O.

Low-maintenance 24 V linear direct driveNo shock absorbers, which may become damaged or have to be exchanged.

6

Commissioning in two steps

Unique auto-learn functionOptimum speed adjustment during the first 2-5 strokes.

Sectional diagram1 Base jaw

2 Junction roller guide

3 Monitoring

4 Drives


6 Patented gear coupling

Gripper Swivel Module EGS

The world’s most compact electric Gripper Swivel Module.

Technical support and sales Tel. +49-7133-103-3888 | schunk.com/Gripper-Swivel-Module-EGS

Electric Gripper Swivel Module Gripper Swivel Module EGS

24 V TechnologyThe new benchmark in assembly automation ensures process reliability and maintenance-low operation.

Easy CommissioningComfortable configuration, no external controller or programming required.

Digital ControlDirectly via 4 digital I/O (gripper opening/closing, turning left/right) or bus distributor.

Size Gripping force

Stroke per jaw

Torque Workpiece weight

25 30 N 3 mm 0.04 Nm 0.15 kg

1

2 3

6

4

5

CompactGripping and swiveling movements are tightly integrated inside the housing. (Angle of rotation between 40° and 290°).

Robot Accessories Angular Compensation Unit AGE-W

Technical support and salesTel. +49-7133-103-3888 | schunk.com/Compensation-Unit-AGE-W

Size Handling weight Deflection

125 22.7 kg ±13°

Angular Compensation Unit AGE-W

The world’s first Angular Compensation Unit for the Use on Robots for simultaneous Rotational and Angular Compensation.

Rotational and Angular CompensationCompensation of inaccuracies in component positioning in handling, assembly, ”bin picking“, and for loading and unloading.

High service lifeUp to 1 million compensation cycles ensured.

Precise CenteringCentrical locking via proven ball system for high-precision centering repeat accuracy.

Robot Interface according to ISO 9409Direct connection to the robot. No additional adapter plate required.

Sectional diagram1 Housing

2 Locking balls

3 Locking piston

4 Mounting flange

1

2

3

4

Sizes Weight Idle speed max. Power

151 .. 1040 1.1 .. 4.53 kg 25,000 – 65,000 RPM 150 .. 1,040 W

Deburring Spindle FDB

Flexible and robot-guided Deburring with up to 65,000 RPM

Technical support and sales Tel. +49-7133-103-3888 | schunk.com/Deburring-Spindle-FDB

Robot Accessories Deburring Spindle FDB

Flexible in Useon robots, but also as a stationary unit.

Adjustable Deburring SpindleThe rigidity of the spindle can be adjusted via compressed air, and ensures optimum machining in every installation position.

High-speed SpindleUp to 65,000 RPM for high feed rates.

Maximum FlexibilityFlexible spindle perfectly adapts to the workpiece contour during deburring.

Sectional diagram1 Pneumatic spindle

2 Ring cylinder

3 Bearing

4 Air connection for compensation

5 Air connection for compressed air motor

1

32

4

5

Technical support and sales Tel. +49-7133-103-3888 | schunk.com/Controller-ECM

Control Unit Controller ECM

Controller ECM with Profinet

Modular 24/48 V Controller for electric Gripping and Rotary Modules.

Power supply Transmission rate

max. 15 A Profibus max. 12 Mbit/sCAN Bus max. 1 Mbit/s

Sectional diagram1 Status display

2 Service interfaces

3 Rotary encoding switch

4 DIP switch

5 M12 plug technology for communication

6 Spring clips and plug connectors

1

324

5

6

6

Uniform Control ConceptVariably and modularly usable for electric gripping and rotary modules with an input voltage of 24 V/48 V.

Easy CommissioningEasy manual parameterization possible by means of PC.

Maximum Interface Flexibilitydue to Profibus (up to 12 Mbits/s), CAN bus (up to 1 Mbit/s), and Profinet certification for ensured compatibility with industry standard. On option, control via 4 digital I/O.

Clear Status DisplayStatus display and error analysis via LED and seven-segments display for faster and clear diagnosis.

Technical support and sales Tel. +49-7133-103-3087 | schunk.com/eGRIP

Configuration

SCHUNK Finger Designer

Individual Gripper Fingers at the Press of a Button – Now new also in Aluminum or Steel.

Available for SCHUNKPGN-plus 40 .. 125MPG-plus 20 .. 64EGP 25 .. 50

Available MaterialsSteelAluminum Polyamide

Cost ReductionEfficient manufacturing process which lowers the manufacturing costs by up to 50% starting at lot size 1.

Integrated Lightweight Structuredue to the grid structure, which is integrated in the material, the weight and volume reduction of the gripper fingers made of steel or aluminum amounts to 50%.

Easy DesignIndividual gripper fingers can be designed and ordered in less than 15 minutes.

Individual Gripper FingersThe additive manufactured gripper fingers made of plastic or steel, allow creating contours, which never have so far been manufactured or were involved with enormous costs.

Quickly available onlineschunk.com/eGRIP

Technical support and sales Tel. +49-7133-103-3888 | schunk.com/Digital-Twin

Configuration Digital Twin

SCHUNK Digital Tools

Virtual Commissioning and Simulation in the Engineering Process using our Digital Gripping System Program.

With the Mechatronics Concept Designer from Siemens PLM So� ware, and the Digital Twin from SCHUNK, construction engineers and plant designers are able to simulate complete assembly plants from the concept to commissioning in a three-dimensional space.

Due to the virtual simulation in the engineering process, development and project time are up to 30% shorter.

All the individual processes can be already systematically coordinated and programmed in advance.

Instead of the classic CAD shell model, a detailed digital image of the individual components is used, including their full functionality.

Going digital in assembly automation: The mechatronic module from the SCHUNK 24 V program will be also available as a Digital Twin for virtual simulation of assembly plants.

Realistic SimulationThe intelligent three-dimensional model allows computer-assisted simulation in real time.

Digital TwinBased on a CAD three-dimensional model, production characteristics, functions, and process parameters can be assigned to the object.

Technical support and sales Tel. +49-7133-103-3888 | schunk.com/3D-Configurator

Configuration SCHUNK Online Configurator

Designing easy and error-free

The new SCHUNK Online Configurator is based on the proven CADENAS Technology.

With the new SCHUNK Online Configurator for assembly automation, construction engineers can implement various pick & place applications, and upload them as a complete assembly group into their CAD program.

With just one click, you can easily download complete handling systems in all common CAD formats (on option two- or three-dimensional).

Thereby, an intelligent combination logistics ensures that only configurations are implemented, which are feasible from the technical and mechanical point of view.

The configurator offers access to more than 10,000 possibilities of combination of the world’s most comprehensive module program for high-performance assembly, in pneumatic and electric versions.

On request, SCHUNK supplies the assembly systems, which were generated in the configurator, ready assembled.

CAD data are available onlineschunk.com/3D-Configurator

Technical support and sales Tel. +49-7133-103-3888 | schunk.com/EPLAN

Configuration EPLAN

EPLAN

SCHUNK starts the Integration of the world‘s largest Gripper Program into the EPLAN Data Portal.

With the EPLAN Data Portal, SCHUNK, the competence leader for gripping systems and clamping technology o� ers significant e� iciency e� ects for designing assembly and handling systems.

As a first step, SCHUNK offers macros of 16 series with a total of 843 individual components on the web-based data platform.

Available components: The parallel gripper EGP, the gripper/swivel module EGS, and the self-learning linear module ELP from the 24 V gripper modular system, as well as the mechatronic gripper EGL.

By using the provided macros, construction engineers and plant designers can reduce their project planning effort, and increase the quality of the machine and plant documentation. All the data are available on the latest version of the EPLAN platform worldwide.

Data can be directly integrated into the corresponding EPLAN software solution or can be downloaded via the browser version of the EPLAN data portal for use in other ECAD programs and can be easily inserted by drag and drop into the individual plans.

ECAD data are available onlineschunk.com/EPLAN

Ihr SCHUNK Ihr persönlicher Gutschein

SCHUNK Catalogs

Catalog orderTel. +49-7133-103-2256 | schunk.com/Catalog-order


Your personal SCHUNK Voucher.You always have an extra “plus” with SCHUNK!

Become a SCHUNK Customer now!If you are a new customer you will receive special o� ers, benefit packages, and the optimum personal support.

Benefit from our loyalty campaignSince you are already a SCHUNK customer, we want to reward your loyalty with exclusive loyalty campaigns and o� ers.

Contact us and find out about our o� ers for new customers and loyalty campaigns.Please contact your SCHUNK consultant or our Customer Center for further information. We are looking forward to hearing from you.

Tel. +49-7133-103-3888 | [email protected]

11,000 standard productsLearn more about the largest portfolio of gripping systems and clamping technology with 11,000 standard components in our catalogs or at schunk.com

Toolholder

Toolholder -RM, -Mini

Toolholder BT-DC

AccessoriesToolholder Fixscanner

Hydraulic Clamping NutHydraulic Expansion Technology

Jaw Quick-change SystemChuck Jaws

Chuck Jaws UVB-HS

Lathe Chuck

Equippedby

Lathe Chuck 400

Lathe Chuck

Modular SystemStationary Workholding WDB

Quick-change Pallet SystemStationary Workholding NSE mikro

Quick-change Pallet SystemStationary Workholding NSE-E mini 90

Supporting JawStationary Workholding TBA-D

Centric Clamping ViseStationary Workholding KSC-F


The world’s first Hydraulic Expansion Toolholder with Standardized Heat Shrinking Contour.

The ultimate for axial machiningDrilling, countersinking, reaming, and threading in a 5-axis center and in the die and mold making industry.

Sectional diagram Chamber system

Expansion sleeve

Base body

Length adjustment screw

Dirt groove

1

2

3

4

5

Toolholder

Sizes Run-out accuracy

Torques Repeat accuracy

HSK-A 63 Ø 6 .. 32 mm

0.003 at 2.5×D

Ø 6 16 NmØ 8 23 NmØ 16 185 Nm

Ø 18 240 NmØ 25 400 NmØ 32 650 Nm

< 0.003 mm

Plug & Work1 : 1 interchangeable. Insert a hydraulic expansion toolholder - replace a heat shrinking toolholder.

Excellent vibration dampingThe hydraulic system ensures a high surface finish, the machine spindle’s performance is enhanced, the tool service live is increased and costs are reduced.

12

5

3

4

Technical support and salesTel. +49-7133-103-3888 | schunk.com/TENDO-Slim-4ax

Fast tool changemicron precise without peripheral equipment. Turn to dead stop.

Now available in Dust- and Coolant-proof Version.

Sectional diagram Base body

Seal

Tool

1

2

3

Toolholder -RM, -Mini

Sizes Clamping diameters Run-out accuracy

TRIBOS-RM HSK-E 32 and HSK-E 40TRIBOS-Mini HSK-E 32 and HSK-E 40TRIBOS-Mini SVL

3 .. 12 mm1 .. 6 mm 0.5 .. 5 mm

< 0.003 mm

1

2

3

One-piece designMinimum maintenance effort and long service life.

Coolant-proofup to 80 bar.

Internal coolant supplyfor reliable chip removal from the tool‘s cutting edge.

< 0.003 mmRun-out and repeat accuracy ensure best surface qualities.

Technical support and salesTel. +49-7133-103-3888 | schunk.com/TRIBOS-RM

-RM, -Mini Polygonal Clamping Technology

< 0.003 mmRun-out and repeat accuracy ensure best surface qualities.

Sectional diagram Clamping screw

Clamping piston

Expansion sleeve and chamber system

Base body

Length adjustment screw

Tool

Dirt groove

1

2

3

4

5

6

7

Toolholder BT-DC

The ultimate for large-volume machiningfor all applications, for all cutting tools.

Up to 300% longer tool lifeProven by a study conducted by the wbk, Institute of Production Science at the Karlsruhe Institute of Technology (KIT).

3

Hydraulic Expansion Toolholder

Now available with simultaneous Taper and Face Support.

4

1

2

5

7

6

Sizes Run-out accuracy

Torque Repeat accuracy

BT-DC 30 with face contact (Ø 20 mm)BT-DC 30 with face contact (Ø 12 mm) BT-DC 40 with face contact (Ø 20 mm)BT-DC 40 with face contact (Ø 12 mm)

0.003 at 2.5×D

Ø 20: 400 Nm (BT-DC 30 with face contact)Ø 12: 110 NmØ 20: 520 Nm (BT-DC 40 with face contact)

< 0.003 mm

Maximum performance on steep taper interfaces100% face contact between the machine spindle and toolholder.

Technical support and salesTel. +49-7133-103-3888 | schunk.com/TENDO-E-compact-dc

Intelligent Clamping Pressure Adjustment speeds up Tool Change.

AccessoriesToolholder Fixscanner

For the seriesTRIBOS-MiniTRIBOS-RMTRIBOS-S

Easy installation Maximum process reliabilityManual data-entry errors and damage to the toolholder due to excessive clamping pressure are now prevented.

Faster tool changedue to the automated process.

Fast and easy retrofittingof the clamping devices TRIBOS SVP-2D, SVP-2D/H and SVP-4.

Technical support and salesTel. +49-7133-103-3888 | schunk.com/TRIBOS-Fixscanner

Application exampleFaster! Automated process due to data transmission by Data Matrix Code.

Fixscanner

User-friendlydue to fast and easy clamping with an Allen key.

Sectional diagram Actuation screw

Clamping piston

Sealing element

Clamping force display

Base body

1

2

3

4

5

Hydraulic Clamping NutHydraulic Expansion Technology

60 kN clamping forceensure maximum process reliability.

Hydraulic Clamping Nut

Efficiency boost for Hydraulic Clamping Nuts.

SafeClamping control by means of clamping force display.

Interfaces Axial clamping force

M18 .. M32On request, the thread can be reworked up to M36.

60 kN

1

23

4

5

No micro creep movements in the radial direction, since only axial forces are applied.

Technical support and salesTel. +49-7133-103-3888 | schunk.com/ADDUCO

Clamping different Geometries fast and flexibly.

Jaw Quick-change SystemChuck Jaws

4 different supporting jaws3 types of fine serration1 type for straight wedge bar serration

10 claw inserts PEK-20, PEK-25, PEK-30, PEK-35, PEK-40, PEK-45, PEK-50, PEK-55, PEK-60, PEK-65

3 soft inter-changeable insertsPEW-40, PEW-60, PEW-80Sizes

200 .. 315

Unique clamping rangeUp to 55 mm without displacement of the supporting jaws.

Jaw change < 5 secondsMinimizes set-up costs and is easy to do.

Multi-flexible clampingRaw part and finished parts clamping; bar, flange or square – everything is clamped on one support jaw without costly set-up.

< 0.02 mm repeat accuracySubsequent boring of the soft change inserts is not necessary.

Application examplesFaster! Exchange of round to square workpieces in less than 15 seconds!

Technical support and salesTel. +49-7133-103-3888 | schunk.com/PRONTO

Jaw Quick-change System

15 sec. 15 sec.0

30

1545

5

2035

50 10

2540

55

Chuck Jaws UVB-HS

Optimized interfering contourminimizes the risk of collision.

Soft Chuck Jaw UVB-HS

The new Efficiency Class in Finish Machining.

Optimized machining processesdue to the reduced weight and minimized vibrations, the lathe chuck can be accelerated and slowed down faster.

Sizes

UVB-HS 200UVB-HS 250UVB-HS 315

Improved spraying of coolant for a better view of the workpiece and reduction of air pollution due to aerosols.

Application exampleOptimized! Weight reduction for achieving a higher clamping force.

Increased process reliabilityWeight reduction of more than 20% minimizes the loss of clamping force due to low centrifugal forces.

Technical support and salesTel. +49-7133-103-3888 | schunk.com/UVB-HS

Extremely weight-reduced Wedge Hook Power Chuck with minimum Mass Moment of Inertia.

Lathe Chuck

Sizes Clamping force Jaw stroke max. RPM Through-hole

165 .. 315 mm 65 .. 150 kN 3.2 .. 5.8 mm 3,500 .. 6,000 RPM 53 .. 106 mm

Weight-optimized designwith low mass moment of inertia for minimum acceleration and braking times.

100% compatible with the Kitagawa BB200 seriesNo attachments required.

Large through-holefor machining of all common bar diameters.

DIN EN ISO 50001Suitable for energy management certification according to DIN EN ISO 50001.

Sectional diagram Wedge hook drive

Hardened and extremely rigid base body

Large through-hole

Optimized lubrication system

Mounting threads for workpiece stops

1/16 x 90° and 1.5 mm x 60° fine serration

Jaw stroke display

Blank draw nut

Weight-optimized design

1

2

3

4

5

6

7

8

9

1

2

3

4

5

6

7

8

9

Technical support and salesTel. +49-7572-7614-1302 | schunk.com/ROTA-NCE

Power Chuck

400 Jaw Quick-change Chuck

Efficient Manufacturing of small and medium Batch Sizes.

Jaw change < 60 secondsdue to the integrated jaw quick-change system.

Optimized lubrication systemfor consistently high clamping forces and high quality.

Modular center sleeve systemfor optimum adjustment to new clamping tasks.

Sectional diagram1 Wedge bar actuation

Hardened and extremely rigid base body

Large through-hole

Optimized lubrication system

Fastening threads for workpiece stops

Jaw quick-change system

Base jaws with tongue and groove, and straight serration

Jaw presence control

Ball mechanism for jaw change wrench

Modular center sleeve system

2

3

4

5

6

7

8

9

10

Lathe Chuck 400

Size Clamping force Jaw stroke max. RPM Through-hole

400 mm 240 kN 8 mm 3,500 RPM 128 mm

1

2

3

4

5

6

7

8

9

10

Hardened and extremely rigid base bodyensures a long service life.

Technical support and salesTel. +49-7572-7614-1302 | schunk.com/ROTA-THW-plus-400

Jaw Quick-change Chuck for Lathes with Short Stroke Cylinder.

Jaw quick-change chuckfor great parts variants and small lot sizes.

Easy exchangeof already existing lathe chucks with fine serration.

High jaw quick-change repeatabilityNo reboring of already machined top jaws is necessary.

Sectional diagram1 Wedge bar actuation system

2 Hardened and extremely rigid base body

3 Large through-hole

4 Optimized lubrication system

5 Mounting threads for workpiece stops or cover plates

6 Jaw quick-change system

7 Helical toothed base jaws with tongue and groove

8 Jaw presence monitor

9 Ball mechanism for jaw change wrench

10 Weight-optimized design

Lathe Chuck

Sizes Clamping force Jaw stroke max. RPM

165 .. 315 mm 50 .. 155 kN 3 .. 6.3 mm 3,500 .. 6,000 RPM

100% compatible with the Kitagawa BB200 seriesNo attachments required.

2 5

3

8

19

6 10

4

7

Technical support and salesTel. +49-7572-7614-1302 | schunk.com/ROTA-NCX

Power Chuck

The Modular System specifically for Workpiece Direct Clamping.

Form-fit, self-retained lockingFull pull-down force is maintained even in the event of a pressure drop.

Modular clamping pillarsFlexible clamping for freely molded parts.

Integrated air feed-through to the clamping moduleEasy control of modules and monitoring of workpiece presence.

Sectional diagram Basic module VERO-S WDB

Pneumatic connections on the basic module

Locking drive

Media transfer by stacking modules

Stacking module WDS 50

Stacking module WDS 30

Clamping module WDN

1

2

3

4

5

6

7

Modular SystemStationary Workholding WDB

Pillar diameter Weight of the individual components

Ø 99 mm 1.7 .. 7 kg

High pull-down forcesUp to 25 kN for high cutting parameters and greater production efficiency.

12

23

45

6

7

Technical support and salesTel. +49-7572-7614-1301 | schunk.com/VERO-S-WDB

WDB Quick-change Pallet System

The world’s flattest Quick-change Pallet Module.

Positioning by short taperVery easy connecting interface with a repeat accuracy of < 0.005 mm.

Integrated slide monitoringCan be used in automated applications.

Turbo integrated by defaultPull-down force increased up to 300% for optimum utilization of the machine’s performance, leading to high efficiency.

Sectional diagram High-precision short taper centering

Patented dual stroke system

Turbo function

Large surfaces for transmitting the pull-down and holding forces

Patented drive concept

Large flat surface for best support and highest rigidity

Monitoring of the clamping slide position by dynamic pressure possible

Cover caps for fastening screws

Entry radii on the clamping pin

Pneumatic system

1

2

3

4

5

6

7

8

9

10

Quick-change Pallet SystemStationary Workholding NSE mikro

Low height of 12 mmincreases the workspace of your machine.

Size Holding force Pull-down force Repeat accuracy

Ø 49 mm 3 kN (M3)/5 kN (M4) 400 N (with turbo) < 0.005 mm

89

110

5 7

4 2

3

6

Technical support and salesTel. +49-7572-7614-1301 | schunk.com/VERO-S-NSE-mikro

NSE mikro Miniature Quick-change module

The first electrically driven Quick-change Pallet Module from SCHUNK.

Controlwith 24 V direct current.

Clamping and release time < 1 secondby brushless direct current motor.

Dust- and watertightaccording to protection class IP67.

Sectional diagram High-precision short taper centering

Patented dual stroke system

Large surfaces for transmitting the pull-down and holding forces

Large flat surfaces

Cover caps for mounting screws

Gear

Electric motor

Integrated electronics

4 pin connection

1

2

3

4

5

6

7

8

9

Quick-change Pallet SystemStationary Workholding NSE-E mini 90

Electromechanical driveEnergy-efficient alternative to pneumatic modules.

Technical support and salesTel. +49-7572-7614-1301 | schunk.com/VERO-S-NSE-E-mini

1

23

4

5

6

7

8

9

tSize Holding force Pull-down

forceRepeat accuracy

Clamping and release time

Ø 90 mm 15 kN (M6)25 kN (M8)

1.5 kN < 0.005 mm < 1 s

NSE-E mini 90 Quick-change Pallet Module

Reversible Supporting Jaws for an extreme wide Clamping Range.

180° reversiblefor covering large clamping ranges.

Maximum rigiditydue to fastening by four screws.

I.D. and O.D. clampingfor maximum flexibility.

Sectional diagram Supporting jaw TBA-D

Metric fine serration

Elongated mounting hole

Standard jaw interface

Fastening screw thread for workpiece stops

Plate spring pull-down jaw

Grip stepped jaw

Jaw, soft

Jaw, hewed

Prism jaw

1

2

3

4

5

6

7

8

9

10

Supporting JawStationary Workholding TBA-D

Interface to the SCHUNK standard chuck jaw program for raw and finished parts clamping.

Technical support and salesTel. +49-7572-7614-1301 | schunk.com/TANDEM-TBA-D

Sizes Clamping range

100 .. 250 mm 8 .. 200 mm

3

45

1

2

7

8

9

106

TBA-D Supporting Jaw

The successful Centric Vises KSC now available as a Fixed Jaw Vise KSC-F.

Excellent price-performance ratioWithout intermediate plates directly used on the VERO-S quick-change pallet system.

User-friendlyQuick adjustment of the clamping range.

Largest clamping range of its classFrom 0 to 434 mm.

Sectional diagram Spindle drive

Long jaw guidance

Drainage slots

Fastening thread for workpiece stops

Standard jaw interface

Low height

Mechanical force transmission

Operation with hexagon connection

1

2

3

4

5

6

7

8

Centric Clamping ViseStationary Workholding KSC-F

Modular designFast adjustment to new clamping tasks.

Technical support and salesTel. +49-7572-7614-1301 | schunk.com/KONTEC-KSC-F

Sizes Tightening torques Clamping force Clamping range

80 .. 160 mm 50 .. 120 Nm 25 .. 50 kN 0 .. 434 mm

1

2

3

45

6

7

8

KSC-F Single-acting Vises

SCHUNK Catalogs

Ihr SCHUNK Ihr persönlicher GutscheinSCHUNK Your Personal Voucher

Catalog orderTel. +49-7133-103-2256 | schunk.com/Catalog-order

Your personal SCHUNK Voucher.You always have an extra “plus” with SCHUNK!

Become a SCHUNK Customer now!If you are a new customer you will receive special o� ers, benefit packages, and the optimum personal support.

Benefit from our loyalty campaignSince you are already a SCHUNK customer, we want to reward your loyalty with exclusive loyalty campaigns and o� ers.

Contact us and find out about our o� ers for new customers and loyalty campaigns.Please contact your SCHUNK consultant or our Customer Center for further information. We are looking forward to hearing from you.

Tel. +49-7133-103-3888 | [email protected]

11,000 standard productsLearn more about the largest portfolio of gripping systems and clamping technology with 11,000 standard components in our catalogs or at schunk.com

Jens Lehmann, German goalkeeper legend,SCHUNK brand ambassador since 2012for safe, precise gripping and holding.schunk.com/Lehmann

for safe, precise gripping and holding.

No. 1

SCHUNK GmbH & Co. KG Spann- und GreiftechnikBahnhofstr. 106 - 134D-74348 Lauffen/NeckarTel. +49-7133-103-0 Fax +49-7133-103-2399 [email protected]

schunk.com youtube.com/SCHUNKHQ twitter.com/SCHUNK_HQ facebook.com/SCHUNK.HQ schunk.com/Lehmann

1007

282-

3M-0

4/20

17

© 2

017

SCH

UNK

Gm

bH &

Co.

KG

schunk new products and innovations · schunk gripper 5-finger gripping hand svh sectional diagram...

Documents