schiffer stabilityandpowersharing
DESCRIPTION
Presentation on power sharing and stability will work for electrical engineers, enjoy.TRANSCRIPT
-
Stability and power sharing in microgrids
J. Schiffer1, R. Ortega2, J. Raisch1,3, T. Sezi4
Joint work with A. Astolfi and T. Seel
1Control Systems Group, TU Berlin2 Laboratoire des Signaux et Systemes, SUPELEC
3Systems and Control Theory Group,Max Planck Institute for Dynamics of Complex Technical Systems
4Siemens AG, Smart Grid Division, Energy Automation
HYCON2 Workshop, ECC 2014
Strasbourg, June, 24 2014
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Outline
1 Motivation
2 Microgrids: concept and modeling
3 Problem statement
4 Asymptotic stability and power sharing in droop-controlledmicrogrids
5 Simulation example
6 Conclusions and outlook
2 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Renewables change power system structure
Generation
Consumption
Transmission and distribution
High voltage (HV)transmission system
SG...
SG
SG synchronousgenerator
DG distributedgeneration unit
Medium voltage (MV)distribution system Large loads
Low voltage (LV)distribution system Small loads
3 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Renewables change power system structure
Generation
Consumption
Transmission and distribution
High voltage (HV)transmission system
SG...
SG
SG synchronousgenerator
DG distributedgeneration unit
Medium voltage (MV)distribution system Large loads
DG...
DG
Low voltage (LV)distribution system Small loads
DG...
DG
3 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Need change in power system operation
Increasing amount of renewable DG units highly affects in-feedstructure of existing power systemsMost renewable DG units interfaced to network via AC invertersPhysical characteristics of inverters largely differ fromcharacteristics of SGs
Different control and operation strategies are needed
Source: siemens.com
4 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
The microgrid concept
PCC
Transformer
Main electrical network
1
2
3
4
5 6
7
8
910
11
Load
PV Load
PV
Load
PV
Storage
FCLoad
PV
Load
Wind
Load
PV
Load
PV
FC
SGLoad
PV
Storage
FCLoad
PV
Load
5 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Modeling of microgrids
Main network componentsDG units interfaced to network via inverters or SGsLoadsPower lines and transformers
Standard modeling assumptionsLoads can be modeled by impedancesLine dynamics can be neglected
Work with Kron-reduced network DG unit connected at each node in reduced network
Main focus: inverter-based microgrids
6 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Main operation modes of inverters in microgrids
1 Grid-feeding modeInverter provides prespecified amount of active and reactivepower to grid
2 Grid-forming modeInverter is operated as AC voltage source with controllablefrequency and amplitude
Grid-forming units are essential components in power systemsTasks
To provide a synchronous frequencyTo provide a certain voltage level at all buses in the network
To provide a stable operating point
Focus on inverters in grid-forming mode
7 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Basic functionality of DC-AC voltage inverters
Powerelectronics
L
C2C1
t
vAC,2
t
vDC
t
vAC,1
=
Inverter
vDC vAC,1 vAC,2
8 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Inverter operated in grid-forming mode
vDC2
vDC2
vDC
Rf1 Lf
Cf
Rf2
vIaRg Lg vGa
vIb vGb
vIc vGc
9 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Inverter operated in grid-forming mode
vDC2
vDC2
vDC
Rf1 Lf
Cf
Rf2
vIaRg Lg vGa
vIb vGb
vIc vGc
Modulator
Current controller
Voltage controller
iref
vref
Digital
signal
processor
(DSP)
vI
iI
9 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Grid-forming inverter as controllable voltage source
Model assumptions:Inverter is operated in grid-forming modeIts inner current and voltage controllers track references ideallyIf inverter connects intermittent DG unit (e.g., a PV plant) tonetwork, it is equipped with some sort of fast-reacting storage(e.g., a flywheel or a battery)
Inverterwith LCfilter and
innercontrolloops
Rg Lg vGa
vGb
vGc
vIa
vIb
vIc
vref
10 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Grid-forming inverter as controllable voltage source
Model assumptions:Inverter is operated in grid-forming modeIts inner current and voltage controllers track references ideallyIf inverter connects intermittent DG unit (e.g., a PV plant) tonetwork, it is equipped with some sort of fast-reacting storage(e.g., a flywheel or a battery)
Inverterwith LCfilter and
innercontrolloops
Rg Lg vGa
vGb
vGc
vIa
vIb
vIc
vref
10 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Model of a single grid-forming inverter
Inverter dynamics
i = ui ,
PiPmi = Pmi + Pi ,Vi = u
Vi ,
PiQmi = Qmi + Qi
Inverter output = symmetric three-phase voltage
yi = vIabci= Vi
sin(i )sin(i 2pi3 )sin(i +
2pi3 )
ui control inputsuVi
Pi active powerQi reactive power
Pmi measuredactive power
Qmi measuredreactive power
Pitime constantof meas. filter
MIMO (multiple-input-multiple-output) system11 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
The dq0-transformation
Let : R0 Tdq0-transformation Tdq0 : T R3,
Tdq0() :=
23
cos() cos(23pi) cos(+
23pi)
sin() sin( 23pi) sin(+ 23pi)2
2
2
2
2
2
dq0-transformation applied to symmetric three-phase signal
xabc =
xaxbxc
= A sin()sin( 2pi3 )
sin( + 2pi3 )
xdq0 =
xdxqx0
= Tdq0()xabc = 32Asin( )cos( )
0
x0 = 0 for all t 0
12 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
The dq0-transformation
Let : R0 Tdq0-transformation Tdq0 : T R3,
Tdq0() :=
23
cos() cos(23pi) cos(+
23pi)
sin() sin( 23pi) sin(+ 23pi)2
2
2
2
2
2
dq0-transformation applied to symmetric three-phase signal
xabc =
xaxbxc
= A sin()sin( 2pi3 )
sin( + 2pi3 )
xdq0 =
xdxqx0
= Tdq0()xabc = 32Asin( )cos( )
0
x0 = 0 for all t 0
12 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Model of a grid-forming inverter in dq-coordinatesInverter dynamics in new coordinates
i = i com = ui com,Pi
Pmi = Pmi + Pi ,Vi = u
Vi ,
PiQmi = Qmi + Qi
Inverter output in new coordinates
ydqi = Vi
[sin(i )cos(i )
]
i := i = 0i + t
0
(i com
)d = 0i +
t0
(i com
)d T,
=
t0comd, com R (e.g. synchronous frequency)
13 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Power flow equations
Active power flow at i-th node
Pi (1, . . . , n,V1, . . . ,Vn) = GiiV2i
kNi
(Gik cos(ik ) |Bik | sin(ik ))ViVk
Reactive power flow at i-th node
Qi (1, . . . , n,V1, . . . ,Vn) = |Bii |V 2i kNi
(Gik sin(ik ) + |Bik | cos(ik ))ViVk
neighbors of node i Ni N [0, n] Nconductance between nodes i and k Ni Gik R>0
Gii = Gii +
kNi Giksusceptance between nodes i and k Ni Bik R
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Example network
{1,V1}
{2,V2}
{3,V3}
{4,V4}
{5,V5}
{6,V6}{7,V7}
{8,V8}
P12,Q12
P21,Q21
P17,Q17P71,Q71
P23,Q23
P32,Q32
P36,Q36
P63,Q63
P45,Q45
P54,Q54
P46,Q46P64,Q64
P47,Q47
P74,Q74P78,Q78
P87,Q87
1
2
3
4
5
67
8
inverters in grid-forming mode represented by i , i = 1, . . . , 815 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Power sharing in microgrids
Definition (Power sharing)
Consider an AC electrical network, e.g. an AC microgrid
Denote its set of nodes by N = [1, n] N
Choose positive real constants i , k , i and k
Proportional active, respectively reactive, power sharing betweenunits at nodes i N and k N , if
Psii
=Pskk, respectively
Qsii
=Qskk
Power sharing...allows to prespecify utilization of unitsavoids high circulating currents in network
16 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Power sharing is an agreement problem
N N
U = diag(1/i ), i N
D = diag(1/i ), i N
Control objective
limt
UPN(,V ) = 1|N|,
limt
DQN(,V ) = 1|N|, R>0, R>0
17 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Motivation for droop control of inverters
1 Droop control is widely used control solution in SG-based powersystems to address problems of frequency stability and activepower sharing
Adapt droop control to inverters Make inverters mimick behavior of SGs with respect to frequency
and active power
2 How to couple actuactor signals ( and V ) with powers (P and Q)to achieve power sharing?
Pose MIMO control design problem as set of decoupled SISOcontrol design problems
Analyze couplings in power flow equations over a power line
18 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Power flows over a power line
AssumptionsDominantly inductive power line with admittance Yik C betweennodes i and kSmall phase angle differences, i.e. i k 0
Approximations
Yik = Gik + jBik jBik , sin(ik ) ik , cos(ik ) 1
Active and reactive power flows simplify to
Pik = BikViVkik ,Qik = BikV 2i + BikViVk = BikVi (Vi Vk )
19 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Standard droop control for inverters
Frequency droop control
ui = d kPi (P
mi Pdi )
Voltage droop control
uVi = Vdi kQi (Q
mi Qdi )
Further details: see, e.g., Chandorkar et al.(1993)
kPi R>0 frequency droopgain
d R>0 desired (nominal)frequency
Pdi R active powersetpoint
Pmi R active powermeasurement
kQi R>0 voltage droopgain
V di R>0 desired (nominal)voltage amplitude
Qdi R reactive powersetpoint
Qmi R reactive powermeasurement
20 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Droop control - schematic representation
Inverterwith LCfilter and
innercontrolloops
Rg Lg vGa
vGb
vGc
vIa
vIb
vIc
Powercalculation
Low-passfilter
Qmi
Pmi
+
Qdi
kQi
+
V di
Vi
+
Pdi
kPi
+
d
i
21 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Closed-loop droop-controlled microgrid
i = d kPi (P
mi Pdi ) com,
PiPmi = Pmi + Pi ,Vi = V
di kQi (Q
mi Qdi ),
PiQmi = Qmi + Qi
change of variables
+vector notation
= 1ncom,T = + 1nd KP(P Pd ),TV = V + V d KQ(Q Qd )
= col(i ) Rn = col(i ) RnV = col(Vi ) Rn
V d = col(V di ) Rn
T = diag(Pi ) Rnn
KP = diag(kPi ) Rnn
KQ = diag(kQi ) Rnn
P = col(Pi ) RnQ = col(Qi ) Rn
Pd = col(Pdi ) Rn
Qd = col(Qdi ) Rn
22 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Closed-loop droop-controlled microgrid
i = d kPi (P
mi Pdi ) com,
PiPmi = Pmi + Pi ,Vi = V
di kQi (Q
mi Qdi ),
PiQmi = Qmi + Qi
change of variables
+vector notation
= 1ncom,T = + 1nd KP(P Pd ),TV = V + V d KQ(Q Qd )
= col(i ) Rn = col(i ) RnV = col(Vi ) Rn
V d = col(V di ) Rn
T = diag(Pi ) Rnn
KP = diag(kPi ) Rnn
KQ = diag(kQi ) Rnn
P = col(Pi ) RnQ = col(Qi ) Rn
Pd = col(Pdi ) Rn
Qd = col(Qdi ) Rn
22 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Problem statement
1 Derive conditions for asymptotic stability of genericdroop-controlled microgrids
2 Investigate if droop control is suitable to achieve control objectiveof power sharing
23 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Stability analysis
Coordinate transformation
Follow interconnection and damping assignment passivity-basedcontrol (IDA-PBC) approach (Ortega et al. (2002))
Represent microgrid dynamics in port-Hamiltonian form
Can easily identify energy function
24 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Port-Hamiltonian systems
x = (J(x) R(x))H + g(x)u, x X Rn, u Rm,
y = gT (x)H, y Rm
J(x) Rnn, J(x) = J(x)T (interconnection matrix)R(x) 0 Rnn for all x X (damping matrix)H : X R (Hamiltonian)H =
(Hx
)TPower balance equation
Hstored power
= HTR(x)H dissipated power
+ uT ysupplied power
uT y
25 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Assumptions
Lossless admittances, i.e. Gik = 0, i N , k N
Power balance feasibility
There exist constants s , s R and V s Rn>0, where
:={ Tn |sik | < pi2 , i N , k Ni} ,
such that
1ns 1nd + KP [P(s,V s) Pd ] = 0n,V s V d + KQ [Q(s,V s)Qd ] = 0n
26 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Synchronized motion
Synchronized motion of microgrid starting in (s, 1ns,V s)
(t) = mod2pi
{s + 1n
(st
t0com()d
)},
(t) = 1ns,
V(t) = V s
Aim: derive conditions, under which synchronized motion isattractive
27 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Power flows depend on angle differences ik
Pi (1, . . . , n,V1, . . . ,Vn) =kNi
|Bik | sin(ik )ViVk ,
Qi (1, . . . , n,V1, . . . ,Vn) = |Bii |V 2i kNi
|Bik | cos(ik )ViVk
Flow of system can be described in reduced angle coordinates
Transform convergence problem into classical stability problem
28 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
A condition for local asymptotic stability
Proposition
Fix Pi , kPi , d and Pdi
If V di , kQi and Qdi are chosen such that
D + T W>L1W > 0
xs is locally asymptotically stable
L > 0, T > 0, D = diag(V di + kQiQ
di
kQi (Vsi )
2
)> 0
29 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Physical interpretation of stability condition
D + T W>L1W > 0
L = network coupling strengths between and PT = network coupling strengths between V and Q
But P = P(,V ) 6= P() and Q = Q(,V ) 6= Q(V ) W = cross-coupling strength
Stability condition:couplings represented by L and T have to dominate overcross-couplings contained in W
30 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
A condition for active power sharing
Lemma (Proportional active power sharing)
Assume microgrid possesses synchronized motion
Then all generation units share active power proportionally insteady-state if
kPi i = kPk k and kPiPdi = kPkP
dk , i N , k N
Stability condition + parameter selection criterion
limt UP(,V ) = 1|N|, U = diag(1/i ), i N, R
31 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Reactive power sharing
Voltage droop control does, in general, not guarantee desiredreactive power sharing
Several other or modified (heuristic) decentralized voltage controlstrategies proposed in literature(Zhong (2013), Li et al. (2009), Sao et al. (2005), Simpson-Porcoet al. (2014),...)
But: no general conditions or formal guarantees for reactivepower sharing are given
32 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Distributed voltage control (DVC)
Alternative: consensus-based distributed voltage control (DVC)
uVi = Vdi ki
t0ei ()d,
ei =kCi
(Qmii Q
mkk
)
More on reactive power sharing? visit our talk A Consensus-Based Distributed Voltage Controlfor Reactive Power Sharing in Microgrids,Thursday, June, 26, 10.0010.20, Session Th A9 PowerSystems
33 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
CIGRE MV benchmark model
PCC
110/20 kV
Main electrical network
1
2
3
4
5
6
7
8
910
11
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
5a
5b
5c
9a
9b
9c
10a
10b
10c
Storage
Wind power plant
Photovoltaic plant (PV)
Fuel cell (FC)
= Inverter
Load
34 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Simulation example
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
0
0.1
0.2
0.3
0.4
P[pu]
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 50
0.2
0.4
0.6
0.8
1
t [s]
P/S
N[-]
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
0.1
0.2
0.3
0.4
t [s]
Q/S
N[-]
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
0
0.1
Q[pu]
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
0.99
1
1.01
1.02
1.03
V[pu]
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
5
0
5
102f[Hz]
35 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Conclusions and outlook
Microgrids are a promising concept in networks with largeamount of DG
Condition for local asymptotic stability in losslessdroop-controlled inverter-based microgrids
Selection criterion for parameters of frequency droop control thatensures desired active power sharing in steady-state
Proposed distributed voltage control (DVC), which solves openproblem of reactive power sharing
36 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Outlook and related work
Analysis of lossy networks with variable frequencies and voltagesAnalysis of microgrids with frequency droop control anddistributed voltage control (DVC)Control schemes for highly ohmic networks
Secondary frequency control (Simpson-Porco et al. (2013),Burger et al. (2014), Andreasson et al. (2012), Bidram et al.(2013), Shafiee et al. (2014))Optimal operation control (Dorfler et al. (2014), Bolognani et al.(2013), Hans et al.(2014))Alternative inverter control schemes (Torres et al. (2014), Dhopleet al. (2014))
37 / 38
-
Motivation Microgrids Problem statement Stability and power sharing Simulation example Conclusions and outlook
Publications
Schiffer, Johannes and Ortega, Romeo and Astolfi, Alessandro and Raisch, Jorg and Sezi,TevfikConditions for Stability of Droop-Controlled Inverter-Based Microgrids,Automatica, 2014
Schiffer, Johannes and Ortega, Romeo and Astolfi, Alessandro and Raisch, Jorg and Sezi,TevfikStability of Synchronized Motions of Inverter-Based Microgrids Under Droop Control,To appear at 19th IFAC World Congress, Cape Town, South Africa
Schiffer, Johannes and Seel, Thomas and Raisch, Jorg and Sezi, Tevfik,Voltage Stability and Reactive Power Sharing in Inverter-Based Microgrids withConsensus-Based Distributed Voltage ControlSubmitted to IEEE Transactions on Control Systems Technology, 2014
Schiffer, Johannes and Seel, Thomas and Raisch, Jorg and Sezi, Tevfik,A Consensus-Based Distributed Voltage Control for Reactive Power Sharing in Microgrids13th ECC, Strasbourg, France, 2014
Schiffer, Johannes and Goldin, Darina and Raisch, Jorg and Sezi, TevfikSynchronization of Droop-Controlled Microgrids with Distributed Rotational and ElectronicGeneration,IEEE 52nd CDC, Florence, Italy, 2013
38 / 38
MotivationMicrogrids: concept and modelingProblem statementAsymptotic stability and power sharing in droop-controlled microgridsSimulation exampleConclusions and outlook