sax repair -4

BASSOON BODY LOCK PARTS This is a one piece BASSOON BODY LOCK with a spring loaded pin. The weak link pin breaks off if the instrument is taken a p a r t w i t h o u t releasing the lock. Safer than the old style two piece body lock.

M56 Bassoon Body Lock M56A Replacement Pin and Spring

BASSOON CRUTCH ASSEMBLY

M57 Bassoon Crutch Assembly M57A Bassoon Crutch Only M57B Crutch Holder Only

General items & small goods

MOUTHPIECE BRUSHES

O21 For reed instruments O22 For brass instruments

VALVE BRUSHES O23 For brass instruments

MASTER DUSTER BENCH BRUSH The master Duster is excellent for general shop cleaning. H21 Master Duster Bench Brush

LONG HANDLED PLATERS BRUSH

Long handled platers brush for cleaning work to be plated or to use in removing hard to get at buffing compound. Approximately 13 ( 330.2mm) long with 1 ( 25.4mm) bristles. H22 Long Handled Platers Brush

GLUE BRUSH For use with the glue pot on page 91. H23 Hot Liquid Glue Brush

CLEANING RODS S70 For valve instruments. Made of steel. S71 For trombone slides. Made of steel. S72 For flute. Made of aluminum. S73 For trombone slide cleaning w/handle S74 For cornet and trumpet cleaning (1-1/2 longer w/handle) S75 For tuba/sousaphone. Made of Delrin. S76 Piccolo cleaning rod. Made of aluminum.

KEY BRUSH 1/2 (12.7mm) brush for cleaning under woodwind keys. H24 Key Brush

H21

H22

H23

168

GE

NE

RA

L &

SM

. GO

OD

S

Ferrees Tools, Inc. 1477 E. Michigan Ave.

Battle Creek, MI 49014-8950

J26 LAMP WITH MAGNIFER

The magnifying glass on this unit is 4 (102mm) in diameter, has a focal length of 13 (330mm) and three power magnification. Both arms have flexible ball sockets and are 18 (457mm) long. A C clamp base allows mounting in many ways. Since the arms are flexible, the light and magnifying glass can be

located to avoid interference with the work. The swivel sockets enable the light to be directed to any angle. There is a durable cool touch shade which will prevent burns. This is a very strong, industrial quality unit that is U/L approved. J26 Lamp with Magnifer

General ITEMS & small goods

HEAVY DUTY MODULAR CABINETS

X18 with 36 Drawers

X19 Drawers for X18 X20 Cross Dividers for X19 Drawers (Sold each or package of 25) X21 with 18 Drawers X22 Drawers for X21 X23 Cross Dividers for X22 Drawers (Sold each or package of 25)

X17 with 30 Drawers

X17A Extra Drawers

Drawer Size: 2-3/4 W x 1-1/4 L x 5-7/8 D (69.8mm x 31.8mm x 149mm)

Height: 9-3/4 (248mm)

Width: 18 (457mm)

Depth: 6 (152mm)

Drawer Size: 2-3/4 x 2-1/2 x 5-7/8 (69.8mm x 63.5mm x 149mm)

Height: 9 (229mm)

Width: 18 (457mm)

Depth: 6 (152mm)

GUITAR FRET WIRE

We do not normally sell supplies or tools for guitar repair, even though every so often someone asks about fret wires. Guitar repair is an entirely other ball game from band instrument repair, so we have decided not to even start something we are not familiar with. However, we inherited a large quantity of fret wire. 3 sizes. Since this is not one of our usual products, we are offering this at a very big savings for you. The three sizes are: T42, Standard Banjo fretwire, a bit smaller than pre-war Martin guitar wire, but with more bulk than the smaller wire used on pre-war banjos. T44, Fret wire for electric or acoustic guitar. T46, For electric guitar. This fret wire is as wide but much lower in height than modern jumbo rock frets. Its good for partial fret jobs, to match large worn frets. All 1 Foot Lengths.

Drawer Size: 2 W x 4-1/2 L X 1-1/8 D

Height: 8

Width: 11-3/16

Depth: 5-1/8

169

GE

NE

RA

L & SM

. GO

OD

S

General ITEMS & Small Goods

CLARINET BORE CLEANING BRUSH

For cleaning clarinet bores. H25 Clarinet Bore Brush

SAX BORE CLEANING BRUSH

H26 Extra stiff horsehair for cleaning sax body bores. H26A Sax bore cleaning brush with an extension handle. Handle can be soldered or pressed on.

FLEXIBLE WIRE CLEANING

A nickel plated, flexible coil with a stiff brush on each end. Different designs to clean different Instruments. O7A French horn cleaning brush, on one end conical and one end round. O7B Bassoon bocal cleaning brush. Brushes are sized to pass through with small reed end. The wire is covered with plastic tubing to prevent scratching the inside of the bocal. O9A Trombone cleaning brush. O9B Cornet-Trumpet cleaning brush

CLARINET FLUTE PICCOLO SWABS

Made of absorbent cotton. O14 Clarinet Swab O15 Flute Swab O16 Piccolo Swab O24 Alto Clarinet Swab O25 Bass Clarinet Swab

O20 CHAMOIS SWAB

O20 Chamoi s C l a r i n e t Swab

O17-O19 OBOE SWAB

O17 Oboe swab, double end O18 Oboe swab set (2 single swabs)

BASSOON SWABS O19 Bassoon swab set; one thick, one thin

R75 SAX NECK CLEANER

Sax neck cleaner is a flexible coil with a stiff brush on one end and a soft brush on the other. Fits all saxophone necks. R75 Sax Neck Cleaner 170

GE

NE

RA

L &

SM

. GO

OD

S

171

GE

NE

RA

L & SM

. GO

OD

S

ML170 & M71 THUMB RESTS ML170 Thumb rest only for clarinet and oboe-approx. .400 at body. Fits Bundy. M71 Clarinet thumb rest with screws for Leblanc-appox. .270 at body, with screws. Fits Vito.

L73 & L74 SANIMIST MOUTHPIECE DISINFECTANT

This product is from the people that give us the old reliable Sterisol. Sanimist is designed to disinfect an instrument mouthpiece with just a push of the pump sprayer. Leaves o n l y a m i n t y aftertaste. The pump sprayer eliminates the need of harmful aerosol dispensing cans. Also is a very convenient way to get rid of the germs on a mouthpiece. It comes in either a 2 oz (59ml) or 8 oz (236ml) size. The smaller size is convenient for carrying in an instrument case. The larger size for band directors or repair shops. L73 Sanimist disinfectant, 2 oz (59ml) size L74 Sanimist disinfectant, 8 oz (237ml) size

L71 & L72 STERISOL GERMICIDE Deodorizes Disinfects Cleans

Made especially for wind instruments, mouthpieces and reeds. Useful in the studio, band room, repair shop, etc. Concentrated. L71 Concentrated Sterisol 2 oz (59ml) makes 1 qt L72 Concentrated Sterisol 8 oz (237ml) makes 1 gal (3.79L)


O27 SOUSAPHONE HOLDER

Attention band directors, repairmen, etc.. Ferrees now has invented a way to get that Sousa-phone off the floor and out of the way. Clean up those band rooms. Our steel holder mounts to the wall and has plastic covered ends to keep from scratching the sousaphone. O27 Sousaphone Holder

O26 SOUSAPHONE GRILLS

Easy to sell to band directors, especially if they consider the cost of removing a foreign object that is stuck way down inside a sousaphone. These grills fit inside

sousaphone bells during pep rallies, parades, football games or anytime there is a chance of a practical joker playing basketball with the sousaphone bell as the basket. The grill has a handy ring for easier insertion and removal O26 Sousaphone Grill

Call TOLL FREE to place your order at 800-253-2261!!

8-1/4 long x 4-1/2 wide x 1-1/4 high (209mm long x 114mm wide x 31.8mm high)


Z4 TOOL CHESTS

Metal tool chests. Reinforced case with boxed ends. Front panel slides out of the way under the drawers when the chest is open, but is used to lock all the drawers when desired. Drawers slide easily on compound slides that stop only when fully extended. Very strong. Felt lined drawers. Adjustable partition in all drawers except bottom. Protect your tool investment by protecting your tools from misuse and loss. Z4 Tool Chest

20-1/8 long x 13-5/8 high x 8-1/2 deep (511mm long x 346mm high x 216mm deep) Weighs 32 lbs (14.5kg)

Seven drawers

and a top till 26-5/8 long x 9-1/2 high x 12-9/16 deep

(67.6cm long x 241mm high x 319mm deep) Weighs 24 lbs (10.9kg) Top drawer depth 1-1/2, bottom 3-9/16 (top 38.1mm, bottom 90.5mm)

26-5/8 long x 13-5/8 high x 8-1/2 deep (67.6cm long x 346mm high x 216mm deep) Weighs 42 lbs (19kg)

Eight drawers

and a top till

Z30 Tool Chest, wider model with an extra drawer Z32 Two Drawer Chest Two drawer model can be used alone or as a base for the Z4 or Z30. Felt lined top drawer. Both drawers lock simultaneously.

Z30 TOOL CHESTS

PLASTIC BOXES

Heavy duty plastic yellow storage boxes. Much stronger than the typical variety store type. Convenient and easy to handle. Keeps pads or parts clean and easy to find. Tight fitting cover prevents mixing if box is overturned. Ideal for storing pads, small parts, taps, dies and springs. G3A 6 section box G3C 18 section box

10-7/8 long x 6-3/4 wide x 1-3/4 high (276mm long x 172mm wide x 44.5mm high)

172

S5B FINGER RINGS SOLDER-ON TYPE

S5B Brass finger ring Inside Diameter: .825

S13N REPLACEMENT PEARL BUTTONS FOR CORNET AND

TRUMPET

S13N Nickel Replacement Pearl Button 6-32 thread

S2B LYRE SOCKETS SOLDER-ON TYPE

S2B Brass lyre socket

GE

NE

RA

L &

SM

. GO

OD

S

www.ferreestools.com

L22 LEAD JAWS

Angled thick sheets of soft rolled lead fit over vise jaws to protect fragile items. 4 L (101.6mm), 1/8 thick. L22 Lead Jaws

L40 MEDIUM DUTY BENCH VISE

A medium duty, swivel base vise with 4 (102mm) jaws. A vise like this is necessary for general and woodwind use. It holds a wood mandrel securely, so the instrument will not move. L40 Medium Duty Bench Vise


L41 HEAVY DUTY FLOOR STAND

This stand gets your vise away from the workbench and makes the vise much more useful. The stand secures to the floor for stability. Can also be used to mount a bench grinder or the Z2 band sander. It has a 4 (102mm) diameter pipe with 9 X

9 (229 x 229mm) plates on each end. The floor plate is predrilled to make it easy for you to install. Total height is 33 (83.8cm). It can be shipped by UPS. L41 Heavy Duty Floor Stand

L14 & L14A V-BLOCK

Newly redesigned V-Block. Holds round mandrels in any several repair position in a vise. Mandrels will not slip under pressure. Now has a vertical groove for knuckle tools. L14 V-Block L14A V-Block with locking screws.

L38 LIGHT DUTY VACUUM VISE

This portable vise has a universal ball joint with a positive lock that swivels 360. It tilts up to 90. The rubber vacuum pad

will firmly grip any smooth, non-porous surface. V grooved hardened jaws have a 3-5/8 (92.1mm) capacity and are 3 (76mm) wide. Overall height is 6-1/4 (159mm) that folds to 3-3/4 (95.3mm). Complete with rubber jaws for fragile work. L38 Vacuum Vise

F26 HAND VISE Used to hold small pieces when drilling, milling, grinding or polishing F26 Hand Vise

See L42 rod holding vise on page 25

173

GE

NE

RA

L & SM

. GO

OD

S


E46 SMALL SLIDING CALIPER

Small Sliding Caliper, marked in inches and millimeters. Handy for a multitude of jobs, including measuring pads, pad cups and tenon joints. E46 Small Sliding Caliper

STEEL RULERS

Satin chrome finish steel. Graduated in 8ths, 16ths and 32nds. G97 6 (152mm) long by 3/4 (19mm) wide G97M Same Size Metric Reading Ruler G98 12 (305mm) long by 1 (25.4mm) wide

FLEXIBLE STAINLESS RULER

Stainless steel. Graduated in 32nds, 64ths, mm and .5mm. 12 (305mm) long 15/32 (11.9mm) wide G99 Stainless Steel Ruler

P24 TELESCOPING GAUGES

These gauges are used with micrometers or dial calipers for measuring inside diameters. They are very useful when doing tenon repair work, or when determining valve casing sizes. Gauges feature satin chrome finish, precision ground and polished contact rods of hardened steel. A set comes complete with vinyl case. Six gauges from 5/16 (7.9mm) thru 6 (152mm). P24 Telescoping Gauges

D110A & B SCREW EXTRACTOR

Will remove most instrument screws that are .125 (3.15mm) in diameter or larger. Drill a #51 drill size hole into the center of the screw. Use a larger drill bit where the size of the screw allows. Insert the D110A or D110B Screw Extractor and remove the screw.

D110A Small Screw Extractor for Cornet, Trumpet, Baritone, Saxes neck and lyre. D110B Medium Screw Extractor for Tuba, Sousaphone bell screws, Drums, etc.

174

GE

NE

RA

L &

SM

. GO

OD

S

Call us toll free at 800-253-2261

Worlds Largest Manufacturer of Quality Band Instrument

Repair Tools.


P19 & P20 MICROMETERS These h igh qual i ty Mititoyo micrometers have the anvil and spindle hardened and precision ground with micro-lap finish on ends. Clear graduations on satin chrome finish.

Positive locking clamp. Has a ratchet stop for exact and repetitive readings. Quick and easy zero adjustment. Protective case included. P19 0 thru 1 by .001 P20 0 thru 25mm by .01mm

P18 STUDENT MICROMETER Reads from 0 thru 1 by .001. Cast steel frame. Ratchet stop for exact readings. Satin chrome finish. Excellent value. P18 Student Micrometer

DIVIDERS AND CALIPERS

These spring dividers and calipers are preferred by toolmakers and other mechanics. G12 4 (102mm) Spring Divider G13 4 (102mm) Outside Caliper G14 4 (102mm) Inside Caliper

TWEEZERS E49 Plain steel, soldering tweezers, inexpensive, 6 (152mm) E50 Slide lock tweezers blunt smooth tips, nickel plated 6-1/2 (165mm). Holds parts snugly. E51 Light, medium sharp point, made of plain steel, 4-1/2 (114mm) E52 Extra long curved smooth points. Nickel plated. Handy to use. 6-1/2 (165mm)

DIAL CALIPERS

Stainless steel hardened throughout with measuring faces precision ground and micro lapped for ultimate accuracy. Scale surface has a satin chrome finish with clear crisp engraved graduations in inches or millimeters. Has a clamp for repetitive settings. Protective case. G5A 4 length by .001 G5B 10cm length by .05mm G24A 6 length by .001 G24B 15cm length by .05mm

175

GE

NE

RA

L & SM

. GO

OD

S

Place your order 24 hours a day!!

Call~ 800-253-2261 Fax~ 269-965-7719

Email~ [email protected]


FABRICUT

Fabricut is emery cloth that appears like a window screen to be self cleaning. It is excellent for sanding tenon corks on clarinet joints and for sax necks as well. Sanding time will be decreased because the cork particles will fall through the screen and not hinder the abrasive action of the emery. Because it doesnt load up, the fabricut lasts longer than regular emery. The finer 400 grit may be used for lightly cleaning brass tuning slides. Sold by strip or roll. Fabricut is available in three grits,1-1/2 (38.1mm) wide and comes in 75 foot (22.9m) rolls or 15 (381mm) strips.

H101 220 grit roll H102 320 grit roll H103 400 grit roll

H101A 220 grit strip H102A 320 grit strip H103A 400 grit strip

EMERY CLOTH

Sand corks, refinish grenadilla wood and ebonite, smooth out brass parts. Removes file marks from keys before buffing. Finds hard to see dents in brass.

ROLLS-1 (25.4mm) X 50 Yards (45.7m)

H110 80 grit roll H111 120 grit roll H112 150 grit roll H113 180 grit roll

H114 220 grit roll H115 320 grit roll H116 400 grit roll

STRIPS-1 (25.4mm) X 15 (381mm)



ROLLS-2 (50.80mm) X 50 Yards (45.7m)

H120 220 grit roll H121 320 grit roll

H122 400 grit roll H123 No abrasive

H83 FINE WET AND DRY PAPER

Sheets of extremely fine abrasive on waterproof paper. Excellent for sanding file marks or scratches off clarinet grafts, refinishing bassoons, guitars, refacing mouthpieces, etc.. (400 grit) H83 Wet and Dry Paper

CRYSTOLON OILSTONES

For sharpening knives and other cutting edges. Made from Crystolon abrasive (fine silicon carbide) and oil saturated. Can be used wet or dry. 6 X 2 X 5/8 thick (152mm x 50.8mm x 15.9mm thick). H77 Fine H78 Medium

ABRASIVE TAPE AND CORD

Youll find yourself reaching for these handy products again and again. Especially useful for sanding in inaccessible places. Theyre also excellent for cleaning up around solder fillets or cleaning up keys that have been soldered. The flat tape is 1/4 (6.4mm) wide and impregnated on all sides with aluminum oxide abrasive in 150 grit size. Both the tape and the cord can be used on metal, wood or plastic. H80 Abrasive 1/4 (6.4mm) Tape, 50 ft. (15.2m) Roll H80A Abrasive 1/4 (6.4mm) Tape, 15 (381mm) Strip H81 Abrasive .040 (1mm) Cord, 50 ft. (15.2mm) Roll H81A Abrasive .040 (1mm) Cord, 15 (381mm) Strip

176

GE

NE

RA

L &

SM

. GO

OD

S

Over 60 years of satisfying customers like you!!!

FOR FASTER SERVICE USE YOUR CUSTOMER

NUMBER

CALL 800-253-2261

177

GENERAL ITEMS & SMALL GOODS G

EN

ER

AL &

SM. G

OO

DS

FLEXIBLE VINYL TUBING Two sizes of flexible vinyl tubing to run from the gas valve to your Bunsen burner or blowpipe. This tubing is sold by the foot. O60 Vinyl tubing, 3/8 (9.5mm) O.D. X 1/4 (6.4mm) I.D. for blowpipes. O61 Vinyl tubing, 7/16 (11.1mm) O.D. X 5/16 (7.9mm) I.D. for Bunsen burners.

X195 Moto-Tool and Accessories, 115 volt

X195 DREMEL VARIABLE SPEED MOTO-TOOL KIT

Built in speed dial gives you fingertip control, 5.000 through 28,000 rpm. Dial slow speeds when working on soft materials, faster s p e e d s f o r

working on hard materials. Model X195 DREMEL VARIABLE SPEED MOTO-TOOL lets you select the right speed for the job. 100% ball bearing construction for long life smooth operation. Permanent magnet motor gives steady, dependable power. The durable storage case holds 40 accessories.

QUANT. DESCRIP. QUANT. DESCRIP.

1 Model 380 Variable Speed Moto-Tool

6 Wheel Points

1 Deluxe Kit Box 1 Dressing Stone

7 Sanding Wheels

1 Polishing Stone

2 Engraving Cutter

1 Cup Brush

1 1/8 (3.2mm) Drill

2 Collets 1/8(3.2mm) & 3/32 (2.13m)

2 High Speed Cutter

1 Drum Sander

1 Wrench 2 Sanding Bands

2 Mandrels 1 Finger Grip

2 Felt Polishing Wheels

1 1 Steel Saw

6 Cut-off Wheels 1 Paste Brush

MOUTHPIECE ADAPTORS

French Horn to Alto Horn S3BA Brass S3SA Silver Plated

French Horn to Mellophone S3BM Brass S3SM Silver Plated

MOUTHPIECE ADAPTORS

S3BTB Adaptor to use tenor trombone mouthpiece on bass trombone

S3BT Adaptor to use cornet mo u t h p i e ce o n t ru mp et receiver

FERREES TOOLS, INC. 1477 E. MICHIGAN AVE.

BATTLE CREEK, MI 49014-8950


TAP WRENCH

Adjustable tap wrench. Top centered for use on back center of a lathe when that is revolving in a chuck. D108 Tap Wrench D108A Tap Wrench 1/4-1/2

TAPS AND DIES (DOMESTIC THREADS)

We have all sizes of taps and dies available for most musical instruments. Taps and dies are listed with corresponding drill sizes. Dies have 13/16 (20.6mm) outside diameter.

D200 Taps 0-80 1-56 1-64 1-72 2-56 2-64 3-48 3-56 4-36 4-40 4-48 5-40 5-44 6-32 6-36 6-40 8-32 8-36 8-40 10-24 10-32 12-24 12-28 12-32 1/4-20 1/4-24(1 O.D.) 5/8-27 7/8-27

Drill No. 55 or 56 54 53 53 50 50 47 45 44 43 42 38 37 36 34 33 29 29 28 25 21 17 15 13 7 4

D210 Dies 0-80 1-56 1-64 1-72 2-56 2-64 3-48 3-56 4-36 4-40 4-48 5-40 5-44 6-32 6-36 6-40 8-32 8-36 8-40 10-24 10-32 12-24 12-28 12-32 1/4-20 1/4-24 5/8-27 7/8-27

TAP AND DIE SETS Complete set of domestic thread taps and dies in a plastic box. D200D Set of Taps and Dies (No drills)

DIE STOCKS

13/16 (20.6mm) die stock to holds D210 dies D120D metric up to 4mm. 1 (25.4mm) holds 5mm and up. D109 Die Stock 13/16 (20.6mm) D109A Die Stock 1 (25.4mm)

METRIC TAPS AND DIES

Tap Size D120T Woodwind 1.6-.35 1.7-.35 2.0-.25 2.0-.40 2.2-.45 2.5-.45 3.0-.50

Brasswind 3.0-.60 3.5-.60 4.0-.70 4.0-.75 5.0-.80 6.0-1.00 8.0-1.25

Die Size D120D Woodwind 1.6-.35 1.7-.35 2.0-.25 2.0-.40 2.2-.45 2.5-.45 3.0-.50

Brasswind 3.0-.60 3.5-.60 4.0-.70 4.0-.75 5.0-.80 6.0-1.00 8.0-1.25

D120A Metric Tap & Die Set 1.6-.35 thru 3.0-.50 D120B Metric Tap & Die Set 3.0-.60 thru 8.0-1.25

SCREW PITCH THREAD GAUGES This gauge has 24 blades covering .025 to 6.mm pitch. For gauging of American National or U.S. Standard 60 threads. Precision made set of 51 screw pitches combining all sizes from 4 to 84, including 11-1/2 and 27 Pipe Thread size in a case. G15 Thread Gauge G11 Metric Thread Gauge

179

GE

NE

RA

L & SM

. GO

OD

S

GENERAL items & small goods

ALL PURPOSE FILES Files to fill any technicians needs. All types for use on brass or nickel, and cork. E19 6 Round, straight O cut E20 10 Round, smooth E21 10 Flat, bastard cut E22 8 Warding, second cut E23 10 Flat, smooth cut E24 8 Cantsaw, single cut E25 10, Pillar, smooth cut E26 6, Double, slim taper, 3 corner

R88 FILING BLOCK

An inexpensive wood filing block used to brace small parts while filing. U s e i t i n a 3/4 (19mm) bench hole. R88 Filing Block

E28 HINGE TUBING FILES

These files are cylindrically shaped and are used inside certain sizes of hinge tubing to take out dents or sharp kinks. E28A 1/16 (1.6mm) file for clarinets, flutes, oboes E28B 3/32 (2.4mm) file for saxophone

E30 FILE CLEANER This combination file card (for coarse files) and brush (for fine cut files) with a specially designed pick, is a handy file cleaning tool. E30 File Cleaner

G60 ADJUSTABLE JEWELERS

SAW FRAME Adjustable Jewelers Saw Frame. The finish is polished. Blade length is 5 (127mm) o v e r a l l l e n g t h i s 11-12 (292mm). Blade is NOT included, see below. G60 Adjustable Jewelers Saw Frame

D27 JEWELERS SAW BLADES

Jewelers saw blades, sizes 0, 2, 4, 6. Fine is 0 and coarse is 6. Sold by the dozen. D27 Jewelers Saw blades, sold by the dozen, State size

FILE HANDLES I n e x p en s i v e f i l e handles. A properly fitted handle means quicker, better work done easier and safer. Two sizes.

O11 Fits up to 6 (152mm) files O12 Fits 6 (152mm) to 10 (254mm files)

181

GE

NE

RA

L & SM

. GO

OD

S

GENERAL ITEMS & SMALL GOODS

183

GE

NE

RA

L & SM

. GO

OD

S

T85 TUNE LUBE Using this tune lube on your tuning slides makes them work great. Formula includes our Z6 as a lubricant. T85 Individual size .5 oz T85A Shop size 4 oz jar

*NEW* Z6 SYNTHETIC LUBRICANT

It is important to use this NEW Z6 synthetic lubricant in all friction producing actions. This product, when mixed with your petroleum jelly is Great! It makes all of your m o v e m e n t s e a s i e r ; burnishing, rubbing or contouring. It also tends not to allow as much, if any, scratching of the raw brass or lacquered surfaces. It is also very good with silver plated surfaces. Z6 should be mandatory for all burnishing jobs. Especially rod and ball work. Comes in 4 oz can. Z6 Synthetic Lubricant 4 oz Z6A Pint Z6B Quart

*NEW* Z8 MONEL ADDITIVE Made specifically for Monel. It can be used on brass, stainless, plated valves or trombone slides. Use oil and cold cream (remove cold cream, apply Z8, work slides together, remove slides and wipe them off, then reapply cold cream). This gives you long lasting performance,

without the recurring drag that sometimes occurs. Z8 1-1/4 oz Z8A Pint Z8B Quart

T70 3M PROTECTOR STRIPS

These strips are a b r e a k t h r o u g h product that can keep the finish on a horn in storage look-ing as if it were just polished. The strips a r e e f f e c t i v e

protection for silver, gold, copper and brass. Protection can last as long as six months in a closed area (as in a horn case). The product has already become popular with instrument manufacturers around the world. You may have seen one of the strips in new horn cases. Now this same protection is available to the retailer as well. Using a protector strip in a rental return after it has been cleaned and polished will insure that the horn will still be gleaming, when you open the case, up to six months later. 3M Protector Strips work by absorbing airborne contaminants which cause tarnish to form on silver and other precious metals. The strips are completely non-toxic. Simply place the strip in the case of the horn you wish to protect and forget if for up to six months. T70 3M Protector Strips Sold by the dozen or hundred

Notes from customers: Thanks for the tip. I followed the instructions and 2 parts cleaned out in 2 days. Really great tip...Thanks, Steve (CT).

Ferrees Tools, Inc. 1477 E. Michigan Ave. Battle Creek, MI 49014


CLARINET LYRES Nickel plated with an adjustable center ring for wood or ebonite clarinets. Q15M Lyre for Clarinet middle joint (wood/ebonite) Q16M Middle joint ring only for lyre Q16S Lyre ring screws Q17 Lyre only. Nickel plated without the center ring for metal Clarinets

Q19 FLUTE OR PICCOLO LYRES Q19 Wrist Flute or Piccolo lyre

ALTO, BASS CLARINET AND BASSOON LYRES

Q21A Alto clarinet lyre Q21B Bass clarinet lyre Q22 Bassoon lyre

Q10 TRUMPET CORNET LYRE

Q10S Straight Q10B Bent-5/8 (15.9mm), 90 bend at bottom of shank

Q11 LONG STEM LYRES

Q11 Extra long straight lyre for Baritone, Tuba and Sousaphone

TROMBONE LYRES

Q13A A d j u s t a b l e Trombone lyre with 9/16 ring Q13B A d j u s t a b l e Trombone lyre with 3/4 ring

Q12A 1 piece Trombone lyre with 9/16ring Q12B 1 piece Trombone lyre with 3/4 ring

Q14 SAXOPHONE LYRE

Designed to fit the built in socket on most saxophones. Q14 S a x o p h o n e lyre

184

GE

NE

RA

L &

SM

. GO

OD

S


M70S M70L

Selmer floor peg assy. complete Leblanc floor peg assy. complete

M70A M70B

Selmer rubber tip Leblanc rubber tip

M70C M70D

Selmer rod holder Leblanc rod holder

M70E M70F

Selmer wing screw Leblanc wing screw

M70G M70H

Selmer knurled nut Leblanc knurled nut

M70J M70K

Selmer floor peg rod only Leblanc floor peg rod only


NECK STRAPS

Made of g e n u i n e leather. It has a p las t ic

neckpiece, durable cord, patented non-slip adjustable slide. Each strap is individually boxed. Color is black. O33 Saxophone Strap O34 Alto, Bass Clarinet or bassoon strap Here is a genuine leather sax strap with an extra wide felt lined neckpiece. It is adjustable and comes in an individual box. Tan or Black (specify). O36 Saxophone strap

BASS CLARINET FLOOR PEGS

185

GE

NE

RA

L & SM

. GO

OD

S

F24 SIX SIZE TUBE HOLE PUNCH Six tube, revolving head to change hole sizes quickly. A spring automatically locks the tubes into position. Made of durable cold-rolled steel with self opening spring handles. Great for punching accordion and sax straps. F24 Six Size Hole Puncher

L37 MOUTHPIECE REFACING KIT

Ferrees has long carried the Morgan Mouthpiece Refac-ing Kit. Designed by Henri Selmer in the 1880s and refined by Ralph Morgan over the years, the set includes one glass Direct Reading

Gauge, one taper gauge, and five feeler gauges in sizes .0015, .010, .024, .034 and .050. Also included is an instruction booklet which walks you through the various stages. These are comparison tools. This job is all hand work. This work is a skilled art, a combination of common sense and acquired skill, tempered with good judgment and experience. You can not rush the work. Practice is perfection. Sadly, Ralph Morgan passed away this past summer, this was his gift to the woodwind aficionado. L37 Mouthpiece Refacing Kit Call for availability before ordering. Sold as a kit ONLY. We DO NOT sell the individual parts of the Mouthpiece Refacing kit separately.


S39 DRUM HEAD TUCKER

Tucker has a wood handle a n d b r a s s tongue.

S39 Drum Head Tucker

MAGNIFIERS

These are the popular Telesight magnifiers, with high quality, p r i s ma t i c l e n s e s m o u n t e d i n lightweight plastic frames. There are two styles. Both can be flipped up out of the way when magnification is not required. 2 power with a 10 thru 11 (254mm thru 279mm) focus range for easy use while working. J1 Clip on style for use with regular glasses J2 Half frame for those who do not normally wear glasses

O30 CELLO SET

These cello sets fold up, and are very compact. T h e c h r o m e plated holder has two legs which fasten around the cellists chair legs. A third leg has a series of holes in which the cello end pin can be placed for solid positioning of the instrument during playing. O30 Cello Set

HEAVY DUTY TOOL HANGERS

Heavy duty hangers a re mad e f ro m 5/16 (7.9mm) wide by 3/32 (2.4mm) thick, zinc plated steel. All h a n g e r s h a v e pre-punched holes for securing to the wall or a bench. Two different shapes to choose from.

L STYLE HANGER P40 2 (50.8mm) P41 3 (76.2mm) J STYLE HANGER P42 1/2 (12.7mm)

O30 CELLO SET BEING USED

186

GE

NE

RA

L &

SM

. GO

OD

S

CALL TODAY TO PLACE YOUR ORDER 800-253-2261

Over 60 years of satisfying customers like you!

Worlds Largest Manufacturer of

Quality Band Instrument Repair Tools.


CASE LATCHES

T2 Flute case latch, Sold brass only. 1-5/8 X 5/8 Sold in Pairs (L & R)

T5 Latch with lock 1-3/4 X 1-1/4 Brass or Nickel

T6 Flush Latch with lock 2-3/4 X 1-1/2 Nickel only

T7 Latch without lock 1-3/4 X 1-1/4 Brass or Nickel

T8 Drawbolt latch No lock 2-3/4 X 1-1/2 Brass or Nickel

T9 Flush Latch Set 1-1/4 X 2-1/4 Brass only T9A Hasp only Brass only T14 Flute case latch, in nickel, 1-1/2 X 1-1/4 (H) (W) T17 Large Flush

Latch set, Brass only 1-5/8 X 2-5/8 Includes: latch, body, hasp & Key T17C Hasp only

T18 Latch with Lock Nickel only 1-3/4 X 1-1/4

MOLDED CASE LATCHES These two case latches have a hidden talent. All the rivets and the top are completely covered when installed. With one finger the lever is raised to a vertical position. Let go and it pops open. T12 Small molded case latch 2-1/8 X 5/8 Nickel Only T13 Large molded case latch 1 X 2-1/4 Nickel Only

Same as T17(below), but smaller.

187

GE

NE

RA

L & SM

. GO

OD

S


NEW PICTURE COMING

SOON

NEW PICTURE COMING

SOON


STOP HINGES

T10B Stop Hinge 1-1/4 X 1-5/8 Brass Plated T10N Stop Hinge 1-1/4 X 1-5/8 Nickel Plated

T11B Stop Hinge 1 X 2 Brass Plated T11N Stop Hinge 1 X 2 Nickel Plated

HANDLE LOOPS

T15B Handle loop 1-3/8 X 5/8 Brass Plated T15N Handle loop 1-3/8 X 5/8 Nickel Plated

T20 CASE STUDS

T20 Black Plastic Bottom Stud 5/8 X 1/2 Sold by the dozen

T21 CORNER BRACE

T21 Case reinforcement angle corner brace. Available in nickel

SPLIT RIVETS Specify brass or nickel or finish

(Sold in 100s only)

T23 7/32 (5.6mm) diameter head, 1/8 (3.2mm) diameter body. Lengths available are 6/16, 8/16, 10/16 and 12/16 T24 5/16 (7.9mm) diameter head, 5/32 (3.96mm) diameter body. Lengths available are 6/16, 8/16, 10/16, and 12/16 T25 3/8 (9.5mm) diameter head, 5/32 (3.96mm) diameter body. Lengths available are 8/16, 10/16, and 12/16 T26 100 assorted T23, T24 and T25 rivets. Brass and nickel finish.

WASHERS FOR T24 AND T25 RIVETS

Specify brass or nickel finish (Sold in 100s only)

T27 1/2 (12.7mm) O.D. washers T28 5/8 (15.9mm) O.D. washers T29 100 assorted T27 and T28 washers, brass and nickel.

188

GE

NE

RA

L &

SM

. GO

OD

S

Notes from customers: This is my second reading of this, and I find it most intriguing. I intend to follow this program using your suggested format. Thanks again, Gary. My first experience with you was in 1967-40 years ago-and I am still learning from you....Patrick, OH


T55 Long, flat, black, 8-3/4 (222mm) handle with spring steel support for amps

T53 Flat black handle. 5-1/2 (140mm) long.

T50 Post handle. 5-1/4 (133mm) long. Avail able in black, brown and tan. SPECIFY COLOR.

T56 Leather handle with rings and white stitching. 6 (152mm) long. Black only.

T54 5-1/2 (140mm) black handle.

POWER TONE FLUTE PLUGS

Replace standard flute head cork with the new Power Tone Plug made of super strong delrin plastic with a rubber O ring which seals the air 100%. No loss of power and stability in pitch and tone. The rubber O ring only contacts the metal in the head to produce a more resonant sound. Available in 3 threads sizes. PT-5 Flute Plug (8/32 thread size) (King, Artley, Blessing, Conn, Emerson, Deford, Haynes, Gemeinhardt, Armstrong) PT-6 Flute Plug (6/32 thread size) (Bundy, Buescher, Old Artley) PT-7 Flute Plug ( 4 x .7mm thread size) (Jupiter, Yamaha) NONE FOR ALTO FLUTES

189

GE

NE

RA

L & SM

. GO

OD

S

Consistently the lowest prices in the industry.

FOR FASTER SERVICE USE YOUR

CUSTOMER NUMBER

Ph:800-253-2261 or Fax:269-965-7719


CASE HANDLES

T30 Leather post handle. 5-1/4 (133mm) long. Specify black or brown.

T39 Heavy, black leather handle, with steel reinforcement in handle

T38 Super heavy duty vinyl case handle. 8-1/2 (216mm) long. Black only.

T37 Heavy duty vinyl case handle. 5-3/4 (146mm) long. Black only.

T34 Side buckle leather emergency handle. 5 (127mm) long. Specify black or brown.

T33 End Buckle leather emergency handle. Handle length without buckles is 5 (127mm). Specify black or brown.

190

GE

NE

RA

L &

SM

. GO

OD

S

Worlds Largest Manufacturer of Quality Band Instrument

Repair Tools.

PLACE AN ORDER 24 HRS A DAY!!!

TOLL FREE:800-253-2261 FAX:269-965-7719

[email protected]


ROCHE-THOMAS FAMILY OF FINE LUBRICANTS

VALVE OIL T60 Roche-Thomas Valve Oil 2 oz (59ml) T61 Roche-Thomas Valve Oil 8 oz (237ml)

SPRAY BOTTLE

T66 Roche-Thomas Bone Bottle Sprayer

BORE OIL T67 Roche-Thomas Bore Oil 2 oz (59ml)

TROMBONE SLIDE OIL

T62 Roche-Thomas Slide Oil 2 oz (59ml) T63 Roche-Thomas Slide Oil 8 oz (237ml)

TROMBONE SLIDE CREAM

T64 Roche-Thomas Trombone Slide Cream

TUNING SLIDE GREASE

T65 Roche-Thomas Tuning Slide Grease 1/2 oz (14.2gm)

KEY OIL

T68 Roche-Thomas Key Oil 2 oz(59ml)

ALISYN OIL AND GREASES

BORE OIL/WOOD CONDITIONER T81 Alisyn Bore Oil & Wood Conditioner 6 oz(17.7ml)

CORK & TUNING SLIDE GREASE T82 Aliysn Cork & Tuning Slide Grease .35 oz(10gm)

SOLVENT/CLEANER T83 Alisyn Solvent/Cleaner 4 oz(118ml)

VALVE-SLIDE-KEY OIL T69 Alisyn Valve-Slide-Key Oil .6 oz(17.7ml)

HEAVY DUTY KEY OIL T84 Alisyn Heavy Duty Key Oil .6 oz(17.7ml)

191

T80 LEATHER PAD PRESERVATIVE

Sugar water and saliva are a leather pads worst enemies. Our silicone treatment helps prevent moisture absorption and extends the life of the pad. Sell the treatment as an extra when doing re-pad jobs or offer it as a free service for customer good will. The bottle has a built-in applicator (for leather only). T80 Leather Pad Preservative

GE

NE

RA

L & SM

. GO

OD

S

FERREES HEAVY DUTY SHOP APRON

This smart apron has an adjustable buckle strap, tie in back waist straps and NO DANGEROUS POCKET to get caught and or/entwined and wrapped up by a motor or buffer. These high quality aprons are Repairman Blue and are embroidered with Ferrees NEW logo. Call today to order a Shop Apron!!

See us online at www.ferreestools.com

MOUTHPIECE CAPS

Comes in either nickel finish or gold lacquered. S60 Eb Clarinet, nickel S61 Bb Clarinet, nickel S68 Alto Clarinet, nickel S69 Bass Clarinet, nickel

Soprano Saxophone

S62N Nickel S62G Gold lacquer

Alto Saxophone S63N Nickel S63G Gold lacquer

C Melody Saxophone S64N Nickel S64G Gold lacquer

Tenor Saxophone S65N Nickel S65G Gold lacquer

Baritone Saxophone S66N Nickel S66G Gold lacquer


SAXOPHONE NECK PLUGS (END PLUGS)

Tenor Sax S18P Plastic

Alto Sax S19G Gold Lacquered S19P Plastic S19S Silver Finish

LIGATURES

Clarinet S50 Eb Clarinet, nickel finish S51 Bb Clarinet, nickel finish S58 Alto Clarinet, nickel finish S59 Bass Clarinet, nickel finish

Soprano Saxophone S52N Nickel finish S52G Gold lacquered

Alto Saxophone S53N Nickel finish S53G Gold lacquered

C Melody Saxophone S54N Nickel finish S54G Gold lacquered

Tenor Saxophone S55N Nickel finish S55G Gold lacquered

Baritone Saxophone S56N Nickel finish

Bass Saxophone S57N Nickel finish S57G Gold lacquer

192

GE

NE

RA

L &

SM

. GO

OD

S

REPAIR KITS

EMERGENCY REPAIR KITS Take a look at these handy kits. There is a size for every need and theyre easy to sell to: *Band Directors *Salesmen *On the road musicians

Q29 DELUXE REPAIR KIT This kit contains most items necessary for on the spot repairs to keep em playing. The items come in a sturdy box. Take a look at whats included.

TOOLS Ferrees Mouthpiece Puller, Jewelers Anvil, 2-Swivel Top Screwdrivers, Valve Mirror, 2-Pad Leveling Tools, Tweezers, Spring Hook, Hammer, Rawhide Mallet, Bench Knife, Swedging Pliers, Chain Nose Pliers, Round Nose Pliers, Flat Nose Pliers, Heat Treated Diagonal Cutters, Spring Punching Pliers, Alco-hol Lamp, Lead Block, Warding File, Parallel Round File, Testing Feeler Holder, Clamp on Vise, Pivot Screw Key Reamer, Solder Scraper, Flute Gauge, 6 Rule, Micro Torch.

SUPPLIES 2-Mouthpiece Brushes, Flexible Trombone Brush, Valve Brush, Wet & Dry Sand Paper, Clarinet Pads, Sax Pads, Piccolo Pads, Flute Pads, 4 Thicknesses Sheet Cork, Tube Corks, Water Key Corks, Valve Stem Felts, Sax Key Felts, Sax Bumper Felts, Pad and Cork Cement, Flat Springs, Flat Spring Screws, Stainless Steel Round Springs, Water Key Springs, Valve Springs, Valve Oil, Key Oil, Bore Oil, Wood Screws, Valve Cleaning Rod, Cork Cement, Soft Solder, Solder Flux, French Horn Cord, Split Rivets, Clarinet Swab, Cork Grease, Sax Pivot Screws, Clarinet Pivot Screws, Lyre Screws, Ligature Screws, Baritone Bell Screws, Sousaphone Bell Screws, Brasso, Silvo, Cheesecloth, Bench Oiler, Testing Corks, Shellac, Wood Wedges, Binding Wire, Soldering Millboard, Valve Stem Corks, Emery Strip, Slide Oil. Q29 Deluxe Repair Kit

Q30 STANDARD REPAIR KIT

For band directors or salesmen who dont want to get into emergency repairs deeply enough to buy the Q29, this Q30 Standard Kit will solve many problems.

CONTENTS Cork Cement, Round Nose Pliers, Spring Hook, Swivel Top Screwdriver, Feelers, Cork Knife, Valve Oil, Slide Oil, Bore Oil, Cork Grease, Clarinet Pads, Sax Pads, Flute Pads, Water Key Springs, French Horn Cord, Flat Spring Screws, Alcohol Lamp, Flat Nose Pliers, Brasso, Pad Leveling Tool, Special Pad Prick, Rawhide Mallet, Pivot Screw Key Reamer, Shellac, 4 Thicknesses of Sheet Cork, Water Key Corks, Tapered Neck Corks, Valve Stem Felts, Valve Stem Corks, Felt Bumpers, Sax Key Felts, Stainless Steel Round Springs, Flat Springs, Valve Springs, Pivot Screws, Thumb Rest Screws, Valve Cleaning Rod, Valve Mirror, Emery Strip, Lyre Screws, Ligature Screws, Baritone Bell Screws, Sousaphone Bell Screws. Q30 Standard Repair Kit

Q31 ECONOMY REPAIR KIT The Q31 Economy Repair Kit is for m i n i m u m r e p a i r emergencies. Take it with the band to the football game or parade. Also useful to

the college music major. A lot of repair potential at a minimum price.

CONTENTS Cork Cement, Swivel Top Screwdriver, Cork Knife, Clarinet Pads, Sax Pads, Valve Springs, Special Pad Prick, Tapered Sax Neck Corks, Sax Felts, Sax Bumpers, Water Key Corks, Valve Cleaning Rod, French Horn Cord, Chain Nose Pliers, Spring Hook, Key Oil, Flute Pads, Water Key Springs, Pad Leveling Tool, Sheet Cork, Valve Stem Corks, Stainless Steel Round Springs, Flat Spring Screws, Pivot Screws, Thumb Rest Screws, Pad Cement, Cork Grease Q31 Economy Repair Kit

193

RE

PAIR

KIT

S

INDEX BY NAME

194

IND

EX

BY

NA

ME

~B cont.~ BASSOON TENON TOOLS.........................................97 BEESWAX...................................................................137 BELL IRON, FRENCH HORN/TROMBONE31 BELL IRON, TRUMPET/CORNET31 BELL IRON UNIVERSAL....31 BELL JACK, SOUSAPHONE......................................27 BELL MANDRELS........................................................31 BELL MOUNTING JIG..167 BELL NUTS & SCREWS............................................133 BELL TENON REAMER..97 BELL TENON SET....98 BELT/DISK SANDER.................................................144 BELT SANDER BELTS..144 BELL STEM MANDREL..........................................32 BENCH ANVIL............................................................109 BENCH DUSTER BRUSH..........................................168 BENCH HAMMER......................................................130 BENCH KNIFE..86 BENCH LATHE, WOODWIND..91 BENCH MOTOR ADAPATOR...................................63 BENCH MOTOR SPINDLE.63 BENCH MOTOR, COMPACT.63 BENCH MOTORS.63 BENCH OILER..............................................................82 BENCH PEGS....86 BENCH VISE173 BENDING LEVERS, SAX KEYS.................................72 BERYLLIUM COPPER SPRINGS132 BINDING WIRE...167 BLACK ABS PLASTIC ROD.110 BLACK PIGMENT....75 BLADES FOR BELL TENON REAMER...97 BLADE MAGNETIZER....66 BLADES, HACKSAW.108 BLADE, SCREW HOLDING SCRWDRIVER...66 BLADES, SINGLE EDGE RAZOR.............................86 BLADES, SWIVELTOP SCREWDRIVER.66 BLAZER TORCH..95 BLOW PIPES..................................................................94 BLOWER WITH MOTOR..150 BLUED NEEDLE SPRINGS...131 BLUED STEEL SPRINGS..132 BORE MEASURING TOOL..110 BORE OIL.....................................................................191 BORE TOOL, INSIDE...................................................78 BOTTOM CASE STUD...188 BRACKETS FOR BUFFERS..150 BRASS ANVIL..111 BRASS HEAD HAMMER.44 BRASS JAW PLIERS....................................................90 BRASSO & RED BEAR...........156 BROACHES, PENTAGON...78 BUFFER, FLOOR & WALL MOUNT......145 BUFFING GLOVES, REVERSIBLE.148 BUFFING HOOD.150

~A~ ABRASIVE CORD AND TAPE..176 ABS GRAFT FOR G78..99 ABS PLASTIC GLUE, WELD-ON............................110 ABS PLASTIC ROD, BLACK110 ACCORDION TOOLS.137 ADAPTOR CHUCK...64 ADJUSTMENT SCREW DRILLING JIG..83 ADJUSTABLE FRENCH HORN HOLDING JIG.....53 ADJUSTABLE HACKSAW FRAME....108 ADJUSTABLE JEWELERS SAW FRAME.181 ADJ. OBOE OCTAVE INSERT REMOVER.............71 ADJUSTABLE REAMERS...36 ADJUSTABLE SOCKET REAMER.100 AIR BUFFER...............................................................150 AIR VALVE, 1/2.........................................................159 ALCOHOL LAMP.........................................................95 ALTO CLARINET SWAB .........................................170 ALTO/BASS CLARINET PADS................113, 115, 120 ALTO FLUTE BODY MANDREL...........92 ALTO FLUTE HEAD MANDREL....92 ALTO SAX NECK HOLDERS.......67 ALUMINUM BUSHING, RIGHT HAND..........148 ALUMINUM BUSHING, LEFT HAND........148 ALUMINUM HAND BRAKE.......................................63 ALUMINUM HAND VISE..........................................173 ANVIL, BENCH...........................................................109 ANTI-FLUX, TIX.........................................................166 APRON..........................................................................191 ARBORS, MOUTHPIECE............................................18 ARBORS, UTILITY MOTOR SHAFT................91, 146 ASSEMBLY GLOVES.......148 ASSEMBLY BOARDS........106 ASSEMBLY MANDRELS, WOODEN...................53,56 AUTO LOCKING LUG FOR G88..........25 AUTOMATIC CENTER PUNCH........93

~B~ BAG, DUST COLLECTOR.........................................150 BALLS, DENT..............................................13, 14, 15, 22 BALLS, TUBING CLEANER.....................................157 BARREL LINERS, POLYETHYLENE....................157 BARITONE TUNING SLIDE PLIERS...11 BASE, DENT MACHINE................................................9 BASS CLARINET ARBOR KIT..................................99 BASS CLARINET PADS.............................113, 115, 120 BASS CLARINET SWAB...170 BASS CLAR. TONE HOLE UNDERCUTTERS79 BASS TROMBONE ASSEMBLY MANDREL...........53 BASKET, WORK.........................................................154 BASSOON BELL RINGS79 BASSOON BOCAL CABLE...104 BASSOON BOCAL CLEANER.170 BASSOON BODY LOCK168 BASSOON CRUTCH ASSEMBLY168 BASSOON PADS..........................................................115 BASSOON SWABS......................................................170

Index by name

195

IND

EX

BY

NA

ME

~B cont.~ BUFF RAKE.................................................................148 BUFFS147, 148, 150 BUMPERS, FELT........................................................142 BUMPERS, NEOPRENE.140 BUMPER REMOVER, BASS AND TENOR..18 BUMPER RUBBERS FOR TUBA..140 BUNSEN BURNER..................................................94, 95 BURNISHING RINGS..........35,49 BURNISHERS, CURVED.............................................30 BURNISHERS, DOUBLE END....................................30 BURNISHERS, HOOK..................................................30 BURNISHERS, STRAIGHT.30 BUTANE REFILL..95

~C~ CABINETS....................................................................169 CABLE SET, ROD TAYLOR.......................................17 CABLE SYSTEM, PRITCHARD (TUBA)..................15 CALIPER, MM & .001 INCHES..................................50 CALIPERS, DIAL..........................................51, 64, 175 CALIPERS, INSIDE....................................................175 CALIPERS, OUTSIDE................................................175 CANVAS MALLET/HAMMER...................................44 CAPS, MOUTHPIECE................................................192 CAPS, TENON................................................................78 CASE HANDLE LOOPS.............................................188 CASE HANDLES.................................................189, 190 CASE LATCHES..........................................................187 CASE REINFORCEMENT ANGLE BRACE...........188 CASE STUDS................................................................188 CASING MANDRELS...................................................45 CELLO SET..................................................................186 CEMENT, FRENCH......................................................87 CEMENT, PAD/CORK..................................................87 CENTER PUNCH...........................................................93 CHAIN NOSE PLIERS................................................109 CHAIN NOSE SWEDISH PLIERS......................38, 105 CHAMOIS CLARINET SWAB..................................170 CHEESECLOTH..........................................................156 CHESTS, TOOL...........................................................172 CHIPS, GRENADILLA.................................................75 CHUCKS, JACOBS........................................................63 CLARINET BARREL CENTERING TOOL..............62 CLARINET BARREL REAMER...............................110 CLARINET BODY CENTERING CLAMP................94 CLARINET BORE CLEANING BRUSH..................170 CLARINET KEY BUFFING COMPOUND..............149 CLARINET MOUTHPIECE MANDREL...................70 CLARINET PAD LEVELING TOOL/SLICK.....71,113 CLARINET PADS.....................................................114 CLARINET SOCKET GRAFTING KIT.....................99 CLARINET STRAP.....................................................185 CLARINET SWAB.......................................................170 CLARINET TENON CAPS...........................................78 CLARINET THUMB RESTS.....................................171 CLARINET TONE HOLE CUTTERS......................101

~C cont.~ CLARINET TONE HOLE UNDERCUTTERS..........79 CLEANING RODS.......................................................168 CLEAR MAGIC.............................................................75 CLIP-ON MAGNIFIERS.............................................186 CLIPS, FLUTE...............................................................85 CLIPS, SOLDER..........................................................167 COLD CLEANER........................................................160 COMBINATION FILE CLEANER............................181 COMBO. SCRWDRVR/FL CLEANING ROD...........62 COMBO. SPRINGHOOK/SCREWDRIVER..............66 COMPOUND LEVERAGE PLIERS............................64 COMPOUND LEVERAGE TIN SNIPS.....................108 CONCENTRATED STERISOL.................................171 CONE SHAPED ROLLERS..........................................23 CONTOURED BELL ROLLERS............................23,31 CORD, FRENCH HORN...............................................28 CORK GREASE...........................................................139 CORK KNIFE..........................................................86 CORK PAD CUTTERS.................................................93 CORK PADS.................................................................141 CORK PROTECTOR..................................................142 CORK SANDING ACCESSORY.................................74 CORK STRIP CUTTING GAUGE............................142 CORK STRIPPER........................................................142 CORK WASHERS...139 CORK, SHEET.............................................................141 CORKS, E FLAT FLUTE............................................139 CORKS, FRENCH HORN..139 CORKS, KEY....139 CORKS, MUTE............................................141 CORKS, TRILL KEY..................................................139 CORKS, TUBE & HEAD CORKS.............................140 CORKS, WATERKEY....139 CORNET TUNING SLIDE PLIERS............................11 CORNET & TRUMPET ASSEMBLY MANDREL...53 CORNET & TRUMPET POLISHING JIG.................53 CORNET/TRPT TUN. SL. DENT BL. HAMMER.....20 CORNET/TRUMPET BELL MANDREL...................31 CORROSION CRACKER OIL..............................11, 94 COUNTERSINKS..........................................................78 COUPLING FOR DUSTING GUN............................160 CRACK PINNING WIRE.............................................69 CRACK SLICK SPATULA...........................................88 CROWNS, FLUTE.....................................134, 135, 136 CRYSTOLON OILSTONE.........................................176 CURVED BURNISHERS..............................................30 CURVED NOSE PLIERS............................................107 CURVED SOLDER SCRAPERS................................163 CUTTING PAD...............................................................93 CYLINDRICAL SCRATCH BRUSH........................151

~D~ DEEP COMPACT CABINET.....................................169 DELRIN, BLACK.........................................................110 DELUXE DOUBLE END SPRING HOOK.................70 DELUXE REPAIR KIT.........................................59, 193

Index by name

196

IND

EX

BY

NA

ME

~D cont.~ DELUXE REVERSIBLE SCRAPER.........................167 DENT BALL HOLDER.................................................14 DENT BALL DRIVER/RETRIEVER SETS.........19-21 DENT BALL DRIVERS................................................13 DENT BALL HAMMERS.............................................20 DENT BALLS..............................................13, 14, 15, 22 DENT BALLS, TUBA....................................................16 DENT BALLS, UNDRILLED.......................................35 DENT CABLE, BASSOON BOCAL..........................104 DENT HAMMERS.........................................................12 DENT MACHINE & ACCESSORIES... . . . .1-10 DENT REMOVAL/CABLE SYSTEM, TUBA............17 DENT REMOVER, CORK BARREL..........................34 DENT REMOVING RINGS..........................................34 DENT ROD HOLDING VISE.......................................25 DENT ROD THREADED ADAPTORS.......................15 DENT RODS.......................................................27, 28, 56 DENT RODS, FRENCH HORN...................................28 DENT ROLLER BALLS...............................................22 DENT ROLLERS.....................................................23, 51 DIAL CALIPERS.............................................51, 64, 175 DIAGONAL CUTTERS...............................................108 DIE STOCKS................................................................179 DISK/BELT SANDER.................................................144 DOMESTIC DIES........................................................179 DOMESTIC TAPS.......................................................179 DOMESTIC TAPS & DIES IN A BOX......................179 DOUBLE BUFF RAKE W/HOLDER........................148 DOUBLE HANDLE ROLLERS...................................23 DIE, SWEDGING.....................................................81, 90 DIES, FLUSHBANDING.............................................106 DIES, METRIC.............................................................179 DIES, HEAD SWEDGING (FL/PICC)........................81 DIES, THREADING....................................................179 DISINFECTANTS........................................................171 DISKS/SANDPAPER...................................................144 DIVIDERS.....................................................................175 DOUBLE END BURNISHERS.....................................30 DRAWRINGS...........................................................35, 37 DREMEL ......................................................................177 DRILL BIT GAUGE......................................................89 DRILL BITS....................................................................89 DRILL, HAND..............................................................107 DRILL ROD....................................................................74 DRILLING JIGS............................................................82 DRIVER/RETRIEVER, DENT BALL...................19-21 DRIVERS FOR BARREL TYPE DENT BALLS.......13 DRUM HEAD TUCKER.............................................186 DUCKBILL PLIERS......................................38, 105, 109 DUCKBILL PLIERS, THIN TIP................................109 DUSTING GUN............................................................160 DYE, CONCENTRATE...............................................158

~E~ ELDRED WIDGET....................................................90 ELECTRIC GLUE POT................................................87

~E cont.~ EMERY CAKE.............................................................149 EMERY, ROLL/STRIP...............................................176 END CUT NIPPERS....................................................108 ERICK BRAND REPAIR MANUAL...........................57 EXHAUST FAN............................................................159 EX P A N D A B L E T R O M B O N E S L I D E D E N T REMOVERS...................................................................50 EXPANDER, ROTOR BEARING PLATE..................58 EXPANDERS, RIGHT ANGLE...................................26 EXPANDER, TENON..............................................80, 81 EXPANDERS, WOODWIND JOINT....................80, 81 EXPANDABLE TROMBONE DENT REMOVER, INNER/OUTER............................................................50 EXTERNAL FERRULE BRUSHES..........................164 EXTRACTORS, SCREW......................................67, 174 EXTRUDER, TRIPLE KEY.........................................80

~F~ FABRICUT, ROLL/STRIP.........................................176 FAN, EXHAUST...........................................................159 FEELER/HOLDER........................................................67 FELT SQUARE............................................................143 FELT BUMPERS.........................................................142 FELT SHEETS, SYNTHETIC....................................143 FELTS, SAX KEY/TOP CAP......................................143 FELTS, VALVE WASHERS.......................................143 FERREES REPAIR MANUAL.....................................57 FERRULE BRUSH, INTERNAL...............................164 FILE/CLEANER COMBINATION...........................181 FILE, HANDLES..........................................................181 FILES..............................................................76,181 FILES, SWISS PATTERN & TONE HOLE FILES...76 FILES, TONE HOLE PAD SEAT..............................100 FILING BLOCK...........................................................181 FILING CLAMP, KEY................................................104 FINGER BUTTONS, PEARL.....................................172 FINGER RINGS, SOLDER ON TYPE......................172 FISH SKIN....................................................................102 FLANGE NUTS............................................................146 FLUTE PAD WASHERS, METAL ...112, 134, 135, 136 FLAKE GLUE................................................................87 FLAKE SHELLAC.........................................................88 FLAT NOSE PLIERS..........................................107, 109 FLAT SPRING HOLE PUNCH....................................71 FLAT SPRINGS, CLARINET & SAX.......................132 FLANNEL.....................................................................156 FLEXIBLE COMBINATION RULER......................174 FLEXIBLE VINYL TUBING...............................73, 177 FLEXIBLE WIRE CLEANING BRUSHES..............170 FLINTS..........................................................................163 FLOOR PEGS, BASS CLARINET.............................185 FLOURESCENT BULBS FOR LEAK LIGHTS........84 FLOURESCENT LEAK LIGHTS................................84 FLUSH BAND DIES....................................................106 FLUSH BANDING DIE SHIM STOCK....................106 FLUSH BANDS.............................................................106

Index by name

197

~F cont.~ FLUSH LATCH SET...................................................187 FLUTE/PICCOLO SPRING WIRE...........................132 FLUTE BODY MANDREL...........................................92 FLUTE BOOSTER PLIERS.........................................70 FLUTE BOOSTERS, NYLON....................................136 FLUTE CASE LATCH................................................187 FLUTE CLEANING ROD/SCREWDRIVER.............62 FLUTE CLIPS................................................................85 FLUTE CROWNS........................................134, 135, 136 FLUTE GAUGE.....................................................62, 112 FLUTE GROMMET BOOSTER REMOVER PLIER..............................................................................70 FLUTE GROMMETS..........................................134, 135 FLUTE HEAD MANDREL.......................................6, 92 FLUTE HEAD SWEDGING DIES...............................81 FLUTE JOINT TENON EXPANDER.........................81 FLUTE KEY ARM BENDING SET.............................72 FLUTE KEY PIN REMOVAL TOOL.......................111 FLUTE KEY LEVELING TOOL.................................68 FLUTE MANDRELS.....................................................92 FLUTE PAD CUP TOOL............................................105 FLUTE PAD HEIGHT GAUGE...........................62, 112 FLUTE PAD IRONING TOOL...............................68,71 FLUTE PAD CUP LEVELING TOOLS......................71 FLUTE PAD HOLE PUNCH SET................................93 FLUTE PAD SEATING CLIPS....................................85 FLUTE PAD SPRING WIRE......................................132 FLUTE PAD WASHERS, METAL............134, 135, 136 FLUTE PAD WASHERS, PAPER..............................112 FLUTE PADS................................................................115 FLUTE PLUGS, TONE HOLE...................................189 FLUTE ROLLER, PRECISION...................................92 FLUTE SWAB..............................................................170 FLUTE TENON SLEEVE...........................................100 FLUTE TONE HOLE LEVELING TOOL.................77 FLUTE TRAY...............................................................154 FLUX......................................................................164 FLUX, SILVER SOLDER...........................................164 FLUX, SOFT SOLDER................................................166 FOOT SWITCH..............................................................63 FORMING MANDREL MOUTHPIPE RECEIVER.36 FRACTION RULER....................................................174 FRENCH CEMENT.......................................................87 FRENCH HORN BALL.................................................22 FRENCH HORN CORD................................................28 FRENCH HORN BELL DRIVER................................19 FRENCH HORN/TROMBONE BELL IRON.............31 FRENCH HORN DENT RODS....................................28 FRENCH HORN POLISHING JIG.............................26 F R E N C H H O R N H O O K - B A C K D R I V E R /RETRIEVER...................................................................19 FRENCH HORN MOUTHPIPE RECEIVER FORM-ING MANDREL.............................................................36 FRENCH PLUGS, FLUTE..........................................136 FRET WIRE, GUITAR................................................169

~G~ GAUGE, DRILL BIT.....................................................89 GAUGE, FLUTE PAD HEIGHT..........................62, 112 GAUGE, SAX PAD CUP HEIGHT .............................67 GAUGES, CORK STRIP.............................................142 GAUGES, TELESCOPING.........................................174 GAUGES, THREAD....................................................179 GERMICIDE, STERISOL..........................................171 GLASSES, MAGNIFYING.........................................186 GLOVES, ASSEMBLY, BUFFING............................148 GLUE BRUSH..............................................................168 GLUE GUN KIT.............................................................88 GLUE PLUGS, TAPERED..........................................105 GLUE POT, ELECTRIC...............................................87 GLUE STICKS, CLEAR/WHITE................................88 GLUE, GRANULAR.....................................................87 GLUE, HOT STUFF.......................................................75 GLUE, JET MAGIC.......................................................75 GOLD TRADEMARK CRAYON..............................102 GOLDBEATERS SKIN (FISH SKIN).......................102 GOOSENECK DENT ROD FOR SAXES...................56 GOOSENECK EXPANDERS, SAX.............................81 GRAFTS, SOCKET........................................................99 GREASE, CORK..........................................................139 GREASE, TUNING SLIDE.........................................191 GRENADILLA CHIPS..................................................75 GRILL FOR SOUSAPHONE BELL..........................171 GRINDING WHEEL, SILICON CARBIDE...............64 GRIT BANDSANDER BELTS...................................144 GROMMET/BOOSTER REMOVAL PLIERS...........70 GROMMETS, FLUTE.........................................134, 135 GROUND CASING MANDRELS................................45 GUIDE, VALVE FITTING TOOL...............................38 GUIDES, VALVE (BRASS)...........................................38 GUITAR FRET WIRE.................................................169 GUN, DUST...................................................................160 GUN, GLUE KIT............................................................88 GUN, HEAT....................................................................86 GUN, SPRAY, ACCESSORIES..................................160

~H~ HACKSAW FRAME, BLADES..................................108 HAMMER, BENCH.....................................................130 HAMMER, BRASS HEAD............................................44 HAMMERS, DENT........................................................12 HAND BRAKE FOR BENCH MOTOR......................63 HAND DRILL...............................................................107 HAND TUBING SHRINKER........................................28 HAND VISE, ALUMINUM.........................................173 HANDLE LOOPS, CASE............................................188 HANDLE, BURNISHING RING..................................35 HANDLE, WOOD BURNISHER.................................30 HANDLES, CASE................................................189, 190 HANDLES, FILE..........................................................181 HANGERS, HEAVY DUTY TOOL...........................186 HEAD MANDREL, FLUTE......................................6, 92 HEAD TUCKER FOR DRUMS..................................186

IND

EX

BY

NA

ME

Index by name

198

IND

EX

BY

NA

ME

~H~ HEAT BLOWGUN.........................................................86 HEAT SHRINK TUBING, BLACK.............................73 HEAT STAKING TOOL.............................................129 HEAVY DUTY POST PUSHER/ DENT PULLER....23 HEIGHT GAUGES..........................................62, 67, 112 HINGE TUBE SHORTENERS.....................................76 HINGE TUBING FILES..............................................181 HINGES, STOP............................................................188 HOLDER, CORNET/TRUMPET.................................53 HOLDER, DENT BALL................................................14 HOLDER, FRENCH HORN.........................................26 HOLDER, SAX NECK...................................................67 HOLDING JIG, ADJ. FOR FRENCH HORN............53 HOLDING JIG, VALVE INSTRUMENTS.................53 HOLE PUNCH, FLAT SPRINGS.................................71 HOLE PUNCH SET, FLUTE PADS............................93 HOLE PUNCH, SIX SIZES.........................................185 HOOD, BUFFING........................................................150 HOOK BURNISHERS...................................................30 HOOK NOSE KEY LEVER PLIERS..........................68 HOOK, SPRING.............................................................67 HOSE, AIR & CONNECTIONS.................................159 HOT STUFF GLUE/ACCESSORIES..........................75

~I~ INHIBITOR, RUST......................................................154 IRONING TOOL FOR FLUTE PADS.........................71 IRONS, BELL.................................................................31

~J~ JACK FOR SOUSAPHONE BELL..............................27 JACOBS CHUCK...........................................................63 JAWS, LEAD................................................................173 JET MAGIC GLUE........................................................75 JEWELERS SAW BLADES/FRAME........................181 JIG, ADJUSTMENT SCREW DRILLING.................83 JIG, BELL MOUNTING, CORNET/TRPT..............167 JIG, POST DRILLING..................................................82 JIG, RAISED TONE HOLE........................................103 JIG, SOLDER...............................................................163 JIG, TUBING BENDING..............................................32 JIG, WATERKEY SPRING INSTALLATION..........54 JOINT EXPANDERS, WOODWIND..........................81 JOINT SEPARATORS, TROMBONE.........................18

~K~ KEY BENDING LEVERS FOR SAX...........................72 KEY BRUSH.................................................................168 KEY BUFFING COMPOUND, CLARINET.............149 KEY FILING CLAMP.................................................104 KEY LEVELING TOOL, FLUTE................................68 KEY LEVELING TOOL, SAX.....................................72 KEY LEVER PLIERS, HOOK NOSE.........................68 KEY OIL.......................................................................191 KEY PIN REMOVAL TOOL.....................................111 KEY REAMERS, PIVOT SCREW..............................78 KEY SWEDGING TOOLS, WOODWIND ADJ........69

~K cont.~ KITS, REPAIR........................................................59, 193 KITS, SCREW..............................................................133 KNIVES..........................................................................86 KNUCKLE DENT TOOLS...........................................29

~L~ LACQUER MANDRELS.............................................154 LACQUER REMOVER/STRIPPER..................157, 160 LACQUER, AEROSOL SPRAY.................................159 LACQUER/THINNER, CATALYST, DYE..............158 LAMP, ALCHOL, WICKS............................................95 LAMP, MAGNIFIER AND SHADE..........................169 LAPPING BLOCKS, VALVE.......................................12 LAPPING COMPOUND...............................................12 LAPPING MOTOR, VALVE........................................12 LATCHES, CASE.........................................................187 LEAD BLOCK, PIG.......................................................52 LEAD MELTING LADLE............................................17 LEAD JAWS.................................................................173 LEAK LIGHTS, PARTS/BULBS...........................83, 84 LEVELING BLOCK....................................................109 LEVELING STONE, TROMBONE STAND..............48 LEVELING TOOLS, WOODWIND KEYS..........68, 72 LEVERS, SAX KEY BENDING...................................72 LIGATURE SCREWS.................................................133 LIGATURES.................................................................192 LIGHTER, FILE, FLINTS..........................................163 LIGHT FIXTURE........................................................159 LIME/SCALE REMOVER.........................................154 LINERS, BARREL.......................................................157 LIVE CENTER, WOODWIND.....................................91 LOCK, BASSOON BODY...........................................168 LOWER TENON PLUG HOLDER.............................97 LYRE SCREWS...........................................................133 LYRE SOCKET, SOLDER ON..................................172 LYRES...........................................................................184

~M~ MAGNET, PENCIL STYLE.........................................13 MAGNETIC SCRIBER.................................................13 MAGNETIZER, SCREWDRIVER BLADE...............66 MAGNIFIER, LAMP...................................................169 MAGNIFYING GLASSES..........................................186 MALLETS, CANVAS....................................................44 MALLETS, RAWHIDE.................................................37 MANDRELS, BELL.......................................................31 MANDRELS, CASING..................................................45 MANDRELS, CLARINET MPC & JOINT.................70 MANDRELS, FLUTE....................................................92 MANDRELS, LACQUERING....................................154 MANDRELS, PICCOLO...............................................92 MANDRELS, SLEEVE..................................................45 MANDRELS, TAPERED..............................................33 MANDRELS, TROMBONE SLIDE.............................49 MANDRELS, VALVE CASING & SLEEVE..............45 MANDRELS, VALVE THREAD.................................39 MANDRELS, WOOD........................................53,56,154

Index by name

199

~M cont.~ MEASURING TOOL, CLARINET BORE...............110 MEASURING TOOL, TUNING SLIDE......................32 METAL BACK SAW...................................................108 METAL SNIPS.............................................................108 MICROMETERS.........................................................175 MILLBOARD...............................................................167 MIRROR, VALVE.................................................38, 143 MONEL ADDITIVE...............................................44,183 MORSE TAPER ARBOR FOR CHUCKS..................90 MOTO TOOL KIT, DREMEL...................................177 MOTORS, ACCESSORIES..............................63, 64, 91 MOUNTING JIG, BELL.............................................167 MOUTHPIECE ADAPTORS......................................177 MOUTHPIECE BRUSHES.........................................168 MOUTHPIECE CAPS.................................................192 MOUTHPIECE DISINFECTANT.............................171 MOUTHPIECE MANDREL, CLARINET..................70 MOUTHPIECE POLISHING ARBORS.....................18 MOUTHPIECE PULLER.............................................25 MOUTHPIECE RECEIVER REAMERS....................36 MOUTHPIECE REFACING KIT.......................105,185 MOUTHPIECE TUNING BITS(ADAPTORS).........177 MTHPIECE SHANK STRAIGHTENING ARBOR...18 MOUTHPIPE CABLE KIT........................................24 MOUTHPIPE DENT ROD, TRPT...............................24 MOUTHPIPE DENT ROLLER KIT, TRPT...............24 MOUTHPIPE REC FORMING MANDRELS............36 MUSIC WIRE CUTTERS...........................................108

~N~ NECK CLEANER, SAX..............................................170 NECK HOLDER, SAX...................................................67 NECK PLUGS, SAX.....................................................192 NECK SCREW EXTRACTOR, SAX...........................67 NECK STRAPS.............................................................185 NECK TENON EXPANDER, SAX/BASS CLAR.......80 NEEDLE SPRING PLIERS..........................................68 NEEDLE SPRINGS......................................................131 NEEDLES, PINNING..................................................111 NICKEL SILVER PATCHING MATERIAL.............52 NORBECK CLARINET PADS...................................114 NORTON SPRINGS & BUSHINGS..........................131 NUT DRIVERS.............................................................102 NUTS, BELL.................................................................133 NUTS, FLANGE FOR BUFFING SHAFT................146 NUWHITE CAKE........................................................149

~O~ OBOE ARBOR/SOCKET GRAFTING JIG...............99 OBOE CORK PAD HOLE CUTTER........................142 OBOE OCTAVE TUBE REMOVERS.........................71 OBOE PADS.................................................................115 OBOE TENON TOOL...................................................97 OBOE TENON HOLE CUTTER...............................101 OCTAVE KEY LEVER TUBING, SAX......................73 OCTAVE/REGISTER TUBE REMOVERS...............71 OIL, BORE....................................................................191

~O~ OIL, KEY......................................................................191 OIL, PENATRATING..............................................11, 94 OIL, SLIDE...................................................................191 OIL, VALVE.................................................................191 OILER, BENCH.............................................................82 OILSTONES.................................................................176 OVEN, WOODWIND PAD.........................................112

~P~ PAD CUP TOOL, FLUTE...........................................105 PAD, CUTTING..............................................................93 PAD HEIGHT GAUGES.................................62, 67, 112 PAD HOLE PUNCHES, FLUTE..................................93 PAD IRONING TOOL, FLUTE.............................68, 71 PAD LEVELING TOOLS (CLARINET/FL)......71, 113 PAD OVEN....................................................................112 PAD PRESERVATIVE................................................191 PAD RESONATORS............................................128, 129 PAD RIVET PUNCH...................................................130 PAD SEAT REAMERS................................................100 PAD SEATING CLIPS, FLUTE...................................85 PAD SLICK, CLARINET......................................71, 113 PAD SLICKS, SAX.........................................................73 PAD TESTING FEELER/HOLDER............................67 PAD WASHERS, FLUTE (METAL)..........134, 135, 136 PAD WASHERS (PAPER)..........................................112 PAD/CORK CEMENT...................................................87 PADS, BASSOON.........................................................115 PADS, CLARINET, ALTO & BASS CLAR......114, 115 PADS, CORK................................................................141 PADS, COTTON CLEANING....................................155 PADS, FLUTE...............................................................115 PADS, PICCOLO.........................................................115 PADS, SAX.............................................................120-127 PAPER FLUTE WASHERS........................................112 PARALLEL ACTION PLIERS..................................107 PATCH MAKING TOOL, MATERIAL......................52 PATCHING MATERIAL, BRASS...............................52 PEARL BUTTONS, CORNET/TRPT........................172 PEARL HOLDERS & CLOSING DIES....................102 PEARL PROTECTOR.................................................102 PEARLS, THUMB & FINGER...................................102 PEGS, BENCH................................................................86 PENCIL MAGNET........................................................13 PENETRATING OIL...............................................11, 94 PERMA/LACQUER/REDUCER, DYE.....................161 PICCOLO HEAD SWEDGING DIE............................81 PICCOLO JOINT EXPANDER...................................81 PICCOLO MANDRELS................................................92 PICCOLO PADS..........................................................115 PICCOLO SPRING WIRE..........................................132 PIN REMOVING TOOL, KEY..................................111 PIN VISE.................................................................67, 137 PIN/SPRING PARTS, BASSOON BODY LOCK.....168 PINNING NEEDLES...................................................111 PINNING WIRE, CRACK............................................69

IND

EX

BY

NA

ME

Index by name

200

IND

EX

BY

NA

ME

~P cont.~ PIVOT SCREW COUNTERSINK, WOODWIND.....78 PIVOT SCREW KEY REAMERS...............................78 PIVOT SCREWS, WOODWIND...............134, 135, 136 PLASTIC GLUE ABS..................................................110 PLASTIC ROD, ABS...................................................110 PLASTIC STORAGE BOXES....................................172 PLATE, TROMBONE SLIDES....................................50 PLATERS BRUSH, LONG HANDLED....................168 PLIERS........34, 38, 64, 68, 69,70,90, 105, 107, 109, 137 PLIERS, ACCORDION...............................................137 PLIERS, CHAIN NOSE...............................................109 PLIERS, CURVED NOSE...........................................107 PLIERS, DUCKBILL.............................................38, 109 PLIERS, FLAT NOSE.........................................107, 109 PLIERS, FLUTE BOOSTER INSTALLATION.........70 PLIERS, FL BOOSTER/GRMT REMOV...................70 PLIERS, HOOK NOSE KEY LEVER.........................68 PLIERS, NEEDLE SPRING REMOVER...................68 PLIERS, NEEDLE SPRING REPLACEMENT.........68 PLIERS, PARALLEL ACTION.................................107 PLIERS, ROUND NOSE...............................................69 PLIERS, SLIDE REMOVER...................................11,34 PLIERS, SLIP JOINT..................................................107 PLIERS, SPRING PUNCHING....................................68 PLIERS, SWEDGING....................................................64 PLIERS, TUNING SLIDE REMOVER.......................11 PLUG HOLDER, LOWER TENON............................97 PLUGS, FLUTE............................................................189 PLUGS, GLUE..............................................................105 POLISHES, BRASS & SILVER.................................156 POLISHING HOLDER, COR/TRPT...........................53 POLISHING WHEEL, STEEL...................................148 POLYGON VALVE SPRINGS.....................................54 PORTABLE AIR BUFFER/ACCESSORIES............150 POST BODY COUNTERSINKS..................................62 POST DRILLING JIG/ACCESSORIES......................82 POST LCKNG SC CNTERSINKS/DRILL.................62 POST RAISING TOOL, SAX.......................................55 POST/BODY COUNTERSINKS..................................62 POSTS, SAX ASSORTMENT.......................................55 POWER DISCS.................................................................4 POWER DISC ROLLERS...........................................5, 6 PRESERVATIVE, PAD...............................................191 PRESSURE SENSITIVE TEFLON..............................73 PRITCHARD CABLE SYSTEM (TUBA)...................15 PROTECTOR, CORK.................................................142 PROTECTOR, PEARL................................................102 PROTECTOR STRIPS................................................183 PULLER, MOUTHPIECE............................................25 PUMICE..........................................................................12 PUNCH, FLAT SPRING HOLE...................................71 PUNCH, HOLE FOR STRAPS OR PADS................185 PUNCH, PAD RIVET..................................................130 PUNCHES, CENTER & DRIVE TAPER....................93 PUNCHES, SPRING......................................................67

~Q~ QUICK DRY CORK CEMENT....................................87

~R~ RAGGING TAPE.........................................................148 RAISED TONE HOLE JIG, CLARINET..................103 RAKE, BUFF................................................................148 RAWHIDE MALLETS..................................................37 RAWHIDE STRIPS.......................................................55 RAZOR BLADES, SINGLE EDGE.............................86 REAMER, CLARINET BELL TENON.......................97 REAMER, PIVOT SCREW KEY.................................78 REAMERS, ADJUSTABLE/BLADES.........................36 REAMERS, MOUTHPIECE RECEIVER...................36 REAMERS, PAD SEAT...............................................100 RECEIVER, MTHPIECE FORMING MDRLS.........36 RED ROUGE................................................................149 REDUCER/RETARDER, LACQUER...............158, 161 REED TESTING/TUNING TLS, ACCORDION......137 REFILLS, BUTANE TORCH.......................................95 REPAIR KITS.........................................................59, 193 REPAIR MANUALS.................................................57,58 RESONATOR/RIVET KITS.......................................128 RESONATORS, SAX PADS...............................128, 129 RETARDER, LACQUER....................................158, 161 REVERSIBLE SCRAPER, BLADES.........................167 RIBBON SOLDER.......................................................166 RIGHT ANGLE DENT TOOLS...................................38 RIGHT ANGLE EXPANDERS....................................26 RING SHRINKING DIES, WOODWIND.................104 RINGS, BURNISHING............................................35, 49 RINGS, DRAW.........................................................35, 37 RINGS, SOLDER ON FINGER..................................172 RIVET PUNCH, SAX PAD.........................................130 RIVET WASHERS.......................................................188 RIVETS...................................................................130,188 ROCKET ROLLER.......................................................51 ROD, ABS PLASTIC.........................................

sax repair -4

Documents