sandcastle necklace jewelry making tutorial from ornamentea.com
TRANSCRIPT
-
8/9/2019 Sandcastle Necklace Jewelry Making Tutorial from Ornamentea.com
1/1
Light as a sea breeze at your neck, this summery necklace is made with ve
dierent strands o silk cord and delicate glass beads. Dont like to knot? No
problem, youll crimp these beads in place. Weve used size 8 silk beading
cord here but you could also use size 4 or 6.
Unwind your Jade silk beading cord rom the card. Stretch the cord
between your hands, working down the length o the cord until the old
marks begin to all away.
All tools and supplies
are available at
Ornamentea.comor at Ornamentea inRaleigh, NC!
Tutorial copyright 2010
Bedizen Ornaments, Inc.
www.ornamentea.com
Feed the needle end o your cord through a
crimp tube and position the crimp tube 1
inches rom the end o the cord. Using your
chain nose pliers fatten the crimp tube.
Feed your needle through an 8-0 bead and
a second crimp tube. Slide the bead and
second crimp tube down into position nextto the fattened crimp tube. Flatten second
crimp tube.
Feed the needle end o the your cord through a crimp tube and position
the crimp 1 inch away rom the previous crimp and bead set. Flatten
crimp. Feed your needle through a 6-0 bead and a second crimp
tube and position next to the fattened crimp. Flatten second crimp.
Repeat this, alternating beads until you have created a strand that is
approximately 15 1/2 inches long.
Supplies:* Jade silk beading cord, size 8* Beige silk beading cord, size 8* Turquoise silk beading cord, size 8
* Carnelian silk beading cord, size 8* Amber silk beading cord, size 8* 8x14 antique brass lobster claw* 2 inches antique brass reallyround cable chain* 2 antique brass old over ends* 3 antique brass jump rings, 5 mm* chocolate brown Toho 6-0 beads* chalk white Toho 8-0 beads* gold plate tube crimps, size 2* 527 jewelry glue
* Scissors* Chain nose pliers
Tools:
Create the remaining our strands o beaded silk in the same manner
with the ollowing lengths: 17 inches, 18 inches, 19 inches, 20 inches, 21inches.
1
2
3
4
5Place a very small drop o glue inside one
o the old over ends. Place the end o each
strand inside the old over end and press
each side in using a pair o chain nose pliers.
Repeat on the other end o the strands using
the second old over end.
6
Using your chain nose pliers open on link on
the chain. Remove the link rom the chainand eed it through the loop on the lobster
claw and through the loop on one o the
old over ends. Close securely. Attach the
remaining chain to the other side o the
necklace in a similar manner to create an
extender chain.
7Using your chain nose pliers open a 5 mm
jump ring and use it to attach a 6-0 bead to
the end link in the extender chain. Repeat
with 2 8-0 beads on each side o the 6-0.
If you prefer to make your necklacewith one color of silk cord you will
only need to purchase one package
to make the necklaceand youll
have some left over!
Finished length: 16 inches, adjusts to 18 inches