Operating InstructionsVACUUM CLEANER Before operating this unit, please read the instructions carefully. Indoor use only.Register your product at www. samsung. com/ global/ registerDJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 1Downloaded From Vacuum-Manual.com Manuals1IMPORTANTSAFEGUARDS1. Read all instructions carefully. Before switching on, make sure that the voltage of yourelectricity supply is the same as that indicated on the rating plate on the bottom of thecleaner.2. WARNING: Do not use the vacuum cleaner when rug or floor is wet.Do not use to suck up water.3. Close supervision is necessary when any appliance is used by or near children. Do notallow the vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to rununattended at any time. Use the vacuum cleaner only for its intended use as described inthese instructions.4. Do not use the vacuum cleaner without a dust bin. Empty the dust bin before it is full inorder to maintain the best efficiency.5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep thevacuum cleaner away from stoves and other heat sources. Heat can deform and dis-colour the plastic parts of the unit.6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage thecleaner parts. Do not stand on the hose assembly. Do not put weight on the hose. Do notblock the suction or the exhaust port.7. Switch the vacuum cleaner off on the body of the machine before unplugging from theelectrical outlet. Disconnect the plug from the electrical outlet before changing the dustbag or dust container. To avoid damage, please remove the plug by grasping the plugitself, not by pulling on the cord.8. This appliance is not intended for use by young children or infirm persons without supervision unless they are adequately supervised by a responsible person to ensure thatthey can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance.9. The plug must be removed from the socket outlet before cleaning or maintaining the appli-ance.10. The use of an extension cord is not recommended.11. If your vacuum cleaner is not operating correctly, switch off the power supply and consultan authorized service agent.12. If the supply cord is damaged, it must be replaced by the manufacturer or its serviceagent or a similarly qualified person in order to avoid a hazard.13. Dont carry the vacuum cleaner by holding the hose.Use the handle on the vacuum cleaner set.14. Unplug the cleaner when not in use. Turn off the power switch before unplugging.DJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 2Downloaded From Vacuum-Manual.com Manuals21ASSEMBLING THE CLEANERFeatures may vary according to model.Refer to 5,6 page. For storage, park the floor nozzle.CAUTION Please do not press the button ofdust bin handle when carryingmachine.OPTIONOPTIONDJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 3Downloaded From Vacuum-Manual.com Manuals32OPERATING THE CLEANER2-1. POWER CORD2-2. POWER CONTROL (INFRARED CONTROL)HANDLE CONTROLNOTE : If the remote handle control is notworking, the cleaner can be operatedusing the ON/OFF button on the bodyof the machine.NOTE : Dont cover the handle sender whenyou use a handle control button.1. Vacuum cleaner ON/OFF ( )Press the ON/OFF button to operate the vacu-um cleaner. Press again to stop the vacuumcleaner.2. Vacuum cleaner (+ , -)Press the (+) button to operate the vacuum tohighsuction power. Press the (-) button to oper-ate the vacuum to low suction power.Press the power ON/OFF button repeatedly tostart and to stop the vacuum cleaner(OFF ON OFF)1) REMOTE CONTROL TYPE- HOSE- BODYNOTEWhen removing the plug from the electrical outlet, graspthe plug, not the cord.POWER ON/OFFRECEIVEROPTIONAL - DIGITAL SIGNAL[The cleaner is controlled by using infrared signals.]The IR light indicates the partthat receives the infra-red signalfrom the handle control.The filter light is illuminated when the dust packrequires checking or emptying. An audio signal willalso sound.The ON/OFF button operates thevacuum cleanner or stops it.SENDERDJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 4Downloaded From Vacuum-Manual.com Manuals42-3. HOW TO USE AND MAINTAIN THE ACCESSORIESTo reduce suction for cleaning draperies,small rugs, and other light fabrics, pull thetap air until the hole is open.off= For stopping the vacuum cleaner. MAX = For hard floors and heavily soiled carpets.To control power level, just slide the power controlbotton right and left.2) BODY-CONTROL TYPE- BODYAdjust the length of the telescopicpipe by sliding the length control but-ton located in the center of the tele-scopic pipe back and forth.To check for blockages, separate the telescop-ic pipe and adjust to shorten. This allows foreasier removal of waste clogging the tube.PIPEACCESSORYPush the accessory on tothe end of the hose han-dle.Pull out and turn the dust-ing brush for cleaning deli-cate areas.To use the upholstery tool,push the accessory on tothe end of the hose handlein the opposite direction.ELBOW EXTENDING TUBE(OPTION)1. Connect the elbow extending tube to connecting part for hose knoband telescopic pipe.2. Fit the telescopic pipe to the lower part of the elbow extending tube.3. Press the PUSH button.4. With the PUSH button pressed, the elbow extending tube is folded.5. Using the elbow extending tube allows hard to reach areas (e.g. underfurniture)to be cleaned without having to kneel down.1 2 3 4 5Features may vary according to model. All in one Accessory- HOSEDJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 5Downloaded From Vacuum-Manual.com Manuals5For improved pick-up of pet hair andfibre on carpetsOPTION2 3Remove dust inside thebrush housing using adry duster or crevice tool.5Insert brushbar intorotating belt andassemble.6Click the transparentscreen cover back intoplace to reassemble.Push the Open button ofthe transparent screencover to separate the cover.Remove the brushbarfrom the transparentscreen.Remove waste mattersuch as dust and hairtangled around thebrushbar using scissors.Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due tomatters tangled around the drum. In this case, clean the drum with care.Remove waste matter completely ifthe inlet is blocked.Adjust the inlet lever according to thefloor surface.OPTION- CarpetCleaning- FloorCleaningVacuum dust in wide area at onceOPTIONRemove waste matter completelyif the inlet is blocked.For picking up pet hairand fibre on upholsteryand bed linen.Remove wastematter com-pletely wheninlet is blocked.Turn the lock button toUNLOCK, and removewaste matter.BrushTo reassemble, align the cover to thefront of the main body and close. Afterclosing the cover, ensure that the lockbutton is turned to the LOCK position.Warning : Use for bedclothes only. Be cautious not to damage brush during unclogging.Clogs on turbine keeps brush from turning, and in this case, take care of it. OPTIONBrush for blanket14TurbineDJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 6Downloaded From Vacuum-Manual.com Manuals6Once dust reaches the DUSTFULL mark, empty the dust bin.Take the dust bin out bypressing the button.Throw the dust awayin the bin.After empting the DUSTBIN, remove the obstacleslike hair, fur on the cap ofthe DUST BIN.Before use, push the dust bininto the main body of the vac-uum cleaner until you hearthe "click" sound.1 2 34 5 63EMPTYING THE DUST BIN- Empty into a plastic bag(recommended for asthma/allergy sufferers)Separate the dustbin cover.NOTEYou may rinse the dust bin with cold waterOPTIONDJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 7Downloaded From Vacuum-Manual.com ManualsNOTE :74CLEANING THE DUST PACK4-1. WHEN TO CLEAN THE DUST PACK4-2. CLEANING THE DUST BIN4-3. CHECKING THE FILTER CHECK INDICATOR LAMPThe lamp will illuminate to signalwhen suction is reduced.If the light comes on, pleaseclean the DUST BIN as shown.- Please, check the dust bin and dust pack if suction is noticeably reduced orthe filter check indicator lamp turns on after empting the dust bin.Detach the DUST BIN.After empting the DUST BIN,remove the obstacles like hair,fur on the cap of the DUST BIN.Please, check the filtercheck indicator lamp(4-3) as shown in thefollowing illustrations ifthe lamp is still illumi-nated even after clean-ing the dust bin.1 2Turn the vacuum power to 'MAX'If the filter check indicator turnsred with the inletfloating 10cmabove flat floor, clean the DUSTPACK.HANDLE CONTROL BODY CONTROLDJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 8Downloaded From Vacuum-Manual.com Manuals4-4. CLEANING THE DUST PACK1 247 8NOTE : Make sure the filter is completely dry before putting it back into the vacuumcleaner. Allow 12 hours for it to dry.8Remove the dust bin and dustpack as shown.Remove the fixed frameof the dust pack cover.Remove the sponge and filterfrom the dust pack.Wash the sponge and the filterof the dust pack with water.Let the sponge and filter dryin the shade for more than12 hours.Before reassembly,align the dust pack coverand dust pack correctly.Put the assembled dust packinto the main body.Put the sponge and filterinto the dust pack.6 53DJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 9Downloaded From Vacuum-Manual.com Manuals96CLEANING THE OUTLET FILTERNOTE : Replacement filters are avail-able at your local Samsungdistributor.Remove and replace the blocked outlet filter.OPTION - MICRO CARBON FILTERTake out both the dust bin and thedust pack.Remove the motor protection filter fromthe vacuum cleaner. Shake and tap thedust from it and put back in machine.5CLEANING THE MOTOR PROTECTION FILTER1Pull out the HEPA Filter as shown.2Dust the HEPA filter.3Put the HEPA filter into the main bodyuntil you hear a click sound.4Remove the dust bin.DJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 10Downloaded From Vacuum-Manual.com ManualsPROBLEM CAUSE REMEDY 0- IF YOU HAVE A PROBLEMMotor does not start. No power supply.Thermal cut-out.Check cable, plug and socket.Leave to cool.Suction force is graduallydecreasing.Nozzle, suction hose or tubeis blocked.Check for blockage andremove it.Cord does not rewind fully. Check that the cord is nottwisted or wound unevenly.Pull the cord out 2-3m andpush the cord rewind button.Vacuum cleaner does notpick up dirt.Crack or hole in hose. Check hose and replace ifrequired.Low or decreasing suctionFilter isfull of dust.Please check filter and, ifnecessary, clean as illustrat-ed in the instructions. 7CHANGE THE BATTERY(OPTIONAL)WARNING1. Never disassemble or recharge the batteries.2. Never heat up the batteries or throw them into fire.3. Do not reverse (+),(-) poles.4. Dispose of the batteries properly.NOTE1. When the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer.2. Use 2 batteries of size AAA.BATTERY TYPE : AAA Size10DJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 11Downloaded From Vacuum-Manual.com ManualsMEMODJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 12Downloaded From Vacuum-Manual.com ManualsMEMODJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 13Downloaded From Vacuum-Manual.com ManualsMEMODJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 14Downloaded From Vacuum-Manual.com ManualsMEMODJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 15Downloaded From Vacuum-Manual.com ManualsDJ68-00369L REV(0.3)DJ68-00369L(0.3)-EN2/19/08 5:26 PMPage 16Downloaded From Vacuum-Manual.com Manuals