sample of my work--
TRANSCRIPT
A WORK SAMPLEof
Mohammed S. GoudaStructural Engineer, M.Sc.
CRYSTAL PLAZA Project - BLD ( J )
Client:
Location: Egypt
Area: 3700 m2
Use: Mixed use
Number of Floors: 14 floors and mezzanine
Scope: Design review of all structural elements under static and seismic
conditions, preparing the new drawings, and calculation sheet
Main Challenges: Weak soil bearing capacity, numerical modeling, and
seismic analysis of the structure with the presence of two suspended
buildings on its sides
More information:
Part ( J )
Three dimensional numerical model including soil and support flexibility using SAP 2000
2D Numerical model for raft using SAFE
New RFT of raft with rehabilitation proposal for unsafe molded parts
New RFT of ground slab and new details of vertical elements
DMG Office Building
Client :
Location: Egypt
Area: 2300 m2
Use: Administrative
Number of Floors: 9 floors and roof
Scope: Check the structural safety under static and seismic conditions,
preparing assessment report, and providing proposals for inadequate
elements
Main Challenges: Investigating the ability of structural steel supports of
pedestrian bridge to accommodate sway of two parts of building
More information:
DMG Office Building
Three dimensional numerical model including soil and support flexibility using SAP 2000
Modeling of foundations in the 3D Numerical Model
Stresses distribution on soil using SAFE
SAKAN MALL
Client :
Location: Egypt
Area: 3000 m2
Use: Commercial
Number of Floors: 5 floors and roof
Scope: Structural Design
Main Challenges: Design of Retaining wall under variable supporting
conditions, Design of foundations and differential settlement due to
non-uniformity of structure configuration, and first time to lead a group
of work (2 colleagues)
More information:
SAKAN MALL
Three dimensional numerical model including soil and support flexibility using SAP 2000
Modeling of foundations in the 3D Numerical Model
Concrete dimensions and RFT of foundation system
Details of Columns and Retaining wall
RFT of First Basement
El – Badr Plaza Mall
Client :
Location: Egypt
Area: 4000 m2
Use: Commercial
Number of Floors: 4 underground floors and 3 typical floors
Scope: Structural Design
Main Challenges: Design of Retaining wall, Punching of slabs at Atrium
Zone, Deflection, and design of Columns
More information:
El – Badr Plaza
Three dimensional numerical model using SAP 2000
Concrete dim. and RFT of columns, cores, and walls
Concrete dim. and RFT of Retaining wall
Meriland School
Client :
Location: Egypt
Area: 18,000 m2
Use: Educational
Number of Floors: Basement + Ground + 2 untypical floors
Scope: Structural Design
Main Challenges: Proposing the structural system, Numerical modeling
of main building (Parking area, Swimming pool, Gym, Theater, Office
area), Design of foundations, and concentration of main building loads
at the frames supports
More information:
Meriland School
Three dimensional numerical model of main building using SAP 2000
Framing planes of basement and ground floors
Framing plane of foundations
Client :
Location: KSA
Capacity: 400 m3
Use: Potable and fire water system
Total Height: 60 m
Scope: Seismic analysis and design
Hail University tank
3D numerical model and mode shapes
Preparing the structural drawings and details of WADI BRIDGE at TABUK ROAD, PHASE 1, KSA
Preparing the structural drawings and details of Cairo-Cairo Bridge (1) at Suez-Cairo Road, Egypt
Thanks for your precious time
Hope to have your appreciation
Mohammed Salah