520

Safety products are desig-ned to make life easy foryou. When the lamp isremoved from the lampholder body the power isautomatically disconnectedat the contacts - ensuringthat there is no risk ofaccess to live parts.

You can be sure that yourclients or tenants are safefrom risk of shock. In addi-tion the safety range is theonly product on the marketto comply with the newBritish Standard BS 7895for safety enhanced pro-ducts with high temperatu-re resistance. And with aLifetime Guarantee as stan-dard you can just fit andforget!

The inner body of the lampholder is a separate moving partwhich rotates as the lamp is twistedinto place.

Clip on terminal cover preventscasual removal. Integral cordgrip andeasier to access screws and termi-nals allow faster wiring.

Made from an advanced high tempe-rature polymer (resistant up to 210ºC),all lampholders are T2 rated.

The solid switching action ensures that the contacts only beco-me live when a lamp is fully insertedand held correctly in place by the ‘J’slots.

Safety Lampholders and Pendants

521

Ash

ley

All products are designed and testedto comply with new British Standard BS 7895 for safetyenhanced products.

Large multiple knockouts for easiercable installation and twin earth ter-minals will easily accommodate up to 4 earth con-ductors and are positioned for easeof cable access.

Angled terminal back for ease ofwiring. Cables can be cut to thesame length because all terminals are in-line.

Lifetime guarantee on majority ofproducts.

Ashley

Safety lampholders 522

Safety pendant set 523

522

Safety Lampholders

• Complies with BS 7895• T2 = heat resistance rating

(210ºC)• Automatically disconnect

power at the contacts whenthe lamp is removed

• 50.8mm fixing centres fornon-access versions. Usewith mounting blocksMB326E/MT

• Solid brass plungers andcopper plated steel springsmaintain plunger pressure throughout their long life

• Body angle of angled battensset at 30º

• Access lampholders haveintegral RL624 ceiling rosebase and heat resisting PVCtails

• All pendants incorporateautomatic cord grips andsleeve caps for ease of flexi-ble cord stripping

• Home office shield enclosesthe lamp cap for extra safety(enabling compliance withBS 7671 in locations contai-ning bath or shower)

Description Cat Ref.

20

20

Bayonet cap cord grip lampholdersSafety cord grip lampholders - short skirt

Safety cord grip lampholders - home office shield

SEL212

SEL214

20Straight BC batten lampholder3 terminal, home office shield SEL354

10

10

Access BC batten lampholderStraight, 2 terminal body, 3 terminal and earth base, home office shield

Angled, 2 terminal body, 3 terminal and earth base, home officeshield

SEL96T

SEL106T

Pack qty.

SEL212

SEL214

SEL354

SEL96T

523

Safety Pendant Sets

Ash

ley

Ceiling rose• Pendant set complies with

BS EN 60598 -1 : 2000• Capacity of each terminal:

3 x 1.00mm2 conductor• Common base with ‘access’

batten lampholders

• Barriers between terminals• Flexible pendant cord

restraining hooks• Fixing centres 50.8mm• Feet on base to aid mounting

on uneven surfaces

• 3 separate knockouts accept1, 2 or 3 x 1.5mm2 conduc-tors

Description Cat Ref.

10

10

10

10

10

10

Pendant sets with access ceiling roseSafety pendant set 6’’, short skirt

Safety pendant set 9’’, short skirt

Safety pendant set 12’’, short skirt

Safety shield pendant set 6’’, home office shield

Safety shield pendant set 9’’, home office shield

Safety shield pendant set 12’’, home office shield

624SEL2126

624SEL2129

624SEL21212

624SEL2146

624SEL2149

624SEL21412

10Super access terminal bank type ceiling roseAccess terminal bank type Ceiling rose 3 terminalDimensions: 81mm dia x 26mm (halo = 108dia)

RL624

1Low Energy Pendant LE212/6

Pack qty.

624SEL2126

624SEL2129

524

Ashley is a market leaderrenowned for the quality ofits junction boxes. Themost comprehensive range avai-lable. Slot terminals andknockout entries facilitateease of wiring and cablepositioning.

Solid brass terminals and screws, forexcellent conductivity and positiveclamping of conductors.

Selective entry for cables. Large capacity slot terminals forunbroken ring circuit installations.

Extra strong terminals to hold multi-ple conductors.

Junction Boxes

525

Ash

ley

Ashley

Junction boxes 526

526

Junction Boxes

• Complies with BS 6220• Slot terminals are ideal for

taking spurs off uncut ring or loop circuit cables

• Solid machined brass terminals

• Junction box covers secured by single centre screws (apart from J701 which has two screws)

• J701 and J701/TB junction / adaptable box will accept 16mm x 16mm and /or 16mm x 25mm mini-trunking

Description Fixing Terminalcentres capacity

Cat Ref.

20Knockout slot terminal junction boxJunction box - brown 20 Amp 4 terminalDimensions: 59mm dia x 25mm

32mm 3 x 1.5mm2 J201

10

10

10

Selective entry slot terminal junctionboxesJunction box - brown 20 Amp 4 terminalDimensions: 79mm dia x 26mm

Junction box - brown 30 Amp 3 terminal Dimensions: 89mm dia x 32mm

Junction box - brown 20 Amp 6 terminalDimensions: 89mm dia x 26mm

50.8mm 3 x1.5mm2

50.8mm 4 x2.5mm2

50.8mm 3 x 1.5mm2

J301

J401

J601

5

5

Junction / adaptable boxJunction box - no terminalsDimensions: h = 122mm x w = 156mm x d = 32mm

Junction box - with terminal block,Cable ties and related wiring cardDimensions: h = 122mm x w = 156mm x d = 32mm

4 x 1.5mm2

J701

J701/TB

Pack qty.

J201

J301

J401

527

Ash

ley

Junction Boxes

10Downlighter Junction BoxJunction box complete with incomingand outgoing cable clamps.3 plate terminals with separate terminalsfor flexible cords.Dimensions: h = 52mm x w = 53mm x d = 27 mm

J501

Description Cat Ref.Pack qty.

JB701/TB

528

The Ashley IP66 range of switches and sockets aredesigned to provide powerand control in harsh envi-ronments around the home,in commerce and in industry.

The products are rated toIP66 in accordance withBS EN 60529 and will with-stand dust and water jetingress. Their housings aremade from UV stabilisedchemically resistant polycarbonate to ensurehigh impact resistance anda long maintenance freelife.

The attractive, ergonomicdesign and subtle greycolour of Ashley IP66 swit-ches and sockets will ensu-re their ready acceptancein all locations, that areheavily exposed to dustand splashing water.

Products are dust tight and can beused with a pressure hose.

The neoprene seals will not sticktogether, and do not need replacing.

The neoprene seals will not stain thecable.

Product has easy to open catch.

Weather Plus

529

Ash

ley

Lid can be closed fully when 13Aplug with cord grip is inserted.

Ashley

IP66 Switches 530

IP66 Bell push 530

IP66 Sockets 531

IP66 FCU 532

IP66 RCD 532

IP66 Timer socket 532

530

IP66 - Switches and Bell Push

• IP66 rated to BS EN 60529(see page 8.6)

• Fixing holes are for No. 8 woodscrews (not supplied)

• The enclosure has 4 x 20mm entries, 1 on each side

• These switches (except push switches) do NOT have to be derated when used with fluorescent or inductive loads

• Earth terminal supplied in back box

• Switch cable capacity 3 x 2.5mm2

• All products supplied with neon indicators

• All switches are AX rated

Switches• Complies with BS 60669-Pt1

Description entries Cat Ref.

1

1

1

4 x 20 mm

4 x 20 mm

4 x 20 mm

SwitchesSingle pole switch 1 gang 2 way 10 Amp Dimensions: h = 92mm x w = 88mm x d = 67mm

Single pole switch 2 gang 2 way 10 AmpDimensions: h = 92mm x w = 88mm x d = 67mm

Double pole switch 1 gang 20 AmpDimensions: h = 92mm x w = 88mm x d = 67mm

WPS12

WPS22

WPS14

4 x 20 mmBell pushOne gang bell pushDimensions: h = 92mm x w = 88mm x d = 67mm

WBP12

Pack qty.

WPS12

WPS22

531

IP66 - Sockets

Ash

ley

4 x 20 mm

4 x 20 mm

4 x 20 mm

• IP66 rated to BS EN 60529(See page 8.6)

• Fixing holes are for No. 8 woodscrews (not supplied)

• The enclosure has 4 x 20mm entries, 1 on each side

• Socket cable capacity 3 x 2.5mm2

• Earth terminal supplied in back box

Sockets• Complies with BS 1363 Pt. 2• IP66 rated to BS EN 60529• SRCD complies with BS7288

- Operation is passive• SRCD continues to protect

with- Loss of neutral- Pulsating DC earth fault

• SRCD provides disconnectionof both live and neutral poles in the event of an earth fault

Description entries Cat Ref.

1

1

1

SocketsOne gang switched socket 13 Amp Dimensions: h = 130mm x w = 115mm x d = 73mm

Two gang switched socket 13 AmpDimensions: h = 130mm x w = 155mm x d = 73mm

RCD protected socketPulsating D.C. and A.C. Fault current sensitive 30mA Control circuit 240V A.C. 50Hz onlyDimensions: h = 130mm x w = 155mm x d = 73mm

WSS81

WSS82

WSS82R30

Pack qty.

WSS81

WSS82

WSS82R30

532

IP66 - FCU, RCD, Timer Socket

• IP66 rated to BS EN 60529(See page 8.6)

• Fixing holes are for No. 8 woodscrews (not supplied)

• Each switch is fitted with a neon which can be wired as a locator

• The enclosure has 4 x 20mm entries, 1 on each side of the back box

• Earth terminal supplied in back box

• FCU and socket terminal capacity 3 x 2.5mm2

• RCD spur operation is passive

Sockets• Complies with BS 1363 Pt. 2• IP66 rated to BS EN 60529

Description entries Cat Ref.

1

1

1

4 x 20 mm

4 x 20 mm

4 x 20 mm

One gang switched fused spur 13AmpDimensions: h = 130mm x w = 115mm x d = 73mm

One gang RCD spurDimensions: h = 130mm x w = 115mm x d = 73mm

Combined timer and socketDimensions: h = 130mm x w = 155mm x d = 73mm

WSSU83

WSU83R30

WSS81TS24

Pack qty.

WSSU83

WSU83R30

WSS81TS24

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 72 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 300 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects true /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName (http://www.color.org) /PDFXTrapped /False

/Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > > /FormElements true /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MarksOffset 6 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PageMarksFile /RomanDefault /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice