safely integrated. - omni ray ag - handels und ... and remote programming. technicians are no longer...
TRANSCRIPT
sam
os®
pro
samos® pro Compact safety control in the network
Safely integrated.
22
samos pro is the most compact and fastest modular compact safety control for the monitoring and control of mechanical and system engineering applications for up to Category 4 (EN954-1), PLe (EN13849-1) and SIL3 (EN62061). samos pro helps you to implement extensive and complex applications with the highest safety requirements where conventional relay tech-nology reaches its limits.
The basic features:
• Ease of use• High level of convenience
(diagnosis, logic functions)• High level of safety combined
with decisive cost efficiency
Safe monitoring of complex systems thanks to:
• Up to 96 inputs• Up to 48 outputs• Up to 2 gateways• Additional relay expansions
samos net
samos® pro
samos®net
3
samos net modular system conceptswith comprehensive safety functions can be implemented through safe interconnection. Up to four systems can communicate with each other safely.
Safe communication
Modular expandability in systems:
The modular design enables efficient use even for small applications. Even in its most compact configuration, up to four safety switching devices can be replaced (at a width of 45 mm). This significantly reduces the amount of cabling required.
samos® pro
44
CPU
8 ms
IN OUT
The fast shut-off function enables a reaction time of 8 ms. The fast reaction time increases safety and enables shorter distances (e.g. according to EN 13855) between the sensors (light curtain) and the danger area.
So you also save costs and space here.
The tested outputs enable applications up to Category 4.
The modular design also enables expansion at a later stage and therefore flexible planning with a reduced variety of module versions. Easier handling and logistics.
You only pay for what you really need.
The simulation of the programmed logic enables initial testing without hardware. Software errors can be excluded as early as during start-up.
This saves time during the validationof the program.
The software is available online worldwideand in several languages without a license. You are always up-to-date, and service tech-nicians around the globe benefit both from this and from new functions in the future
The simulation of the programmed logic enables initial testing without hardware. Software errors can be excluded as early as during start-up.
This saves time during the validationof the program.
samos® pro
The benefits: Safety, convenience and efficiency
55
Logic functions for the monitoring of valves and contactors enable a pro-active diagnosis.Necessary maintenance operations can be indicated at an early stage.
Downtimes are minimized.
A comprehensive function block library is available. Repeated functions can be stored as individual blocks. Blocks for muting and pressing mean that separate hardware is no longer necessary.
Inflexible hardware is replaced by parameterizable function blocks.
All standard sensors can be connected, irrespective of manufacturer. samos pro adjusts itself to everysensor.
Expensive, special evaluation units are nolonger necessary.
A comprehensive report is generated automatically. The good logic readability also facilitates subsequent expansion and the validation of safety functions.
This supports standard-compliant documentation.
Gateways enable bi-directional communication (50 Byte). Even for varying control environments, this means: Safety technology can be generated and then documented once.
Integration into various field buses is possible without any difficulty.
66
An error memory in the controller also enables the subsequent readout of error conditions (discrepancy times, procedure errors, crossovers); a time stamp is specified. Self-defined messages are also possible.
This facilitates troubleshooting, even in the event of a manipulation attempt.
The use of Ethernet gateways enables remote maintenance and remote programming.
Technicians are no longer required to make expensive, time-consuming trips.
Pluggable coded screw terminals and spring-clamp terminals are available for connection.
This saves time when it comes toinstallation and servicing.
The memory plug contains the program protected by you and remains firmly wired in the control cabinet, so it cannot get lost.
This facilitates servicing.
Remote maintenance / remote programming
Signals that are physically not present are ge- nerated online by a forcing mode. This prevents bypassed safety switches during start-up.
This increases safety and saves time.
The Wieland SISTEMA library enables the easy selection of samos pro modules and therefore the calculation of the PL reached according to EN13849-1.
The team at Wieland will, of course, also be happy to support you when it comes to implementing applications.
7
Type Nominal voltage Remark Terminals Order no.
SP-SCON-P1-K 24 V DCController module(without program memory)
– R1.190.0010.0
SP-SCON-NET-P1-K 24 V DCController module, interconnectable (without program memory)
– R1.190.0020.0
SP-MEMORY – Program memory – R1.190.0080.0
SP-SDIO84-P1-K-A 24 V DCInput-output module8 inputs / 4 outputs
Screw terminals, pluggable R1.190.0030.0
SP-SDIO84-P1-K-C 24 V DCInput-output module8 inputs / 4 outputs
Spring-clamp terminals, pluggable R1.190.0040.0
SP-SDI8-P1-K-A 24 V DCInput module8 inputs
Screw terminals, pluggable R1.190.0050.0
SP-SDI8-P1-K-C 24 V DCInput module8 inputs
Spring-clamp terminals, pluggable R1.190.0060.0
SP-PROFIBUS-DP 24 V DCPROFIBUS-DPFieldbus gateway
– R1.190.0190.0
SP-CANopen 24 V DCSP-CANopen Fieldbus gateway
– R1.190.0210.0
SP-EN-MOD 24 V DCMODBUS/TCPEthernet gateway
– R1.190.0130.0
SP-EN-PN 24 V DCPROFINET-IOEthernet gateway
– R1.190.0140.0
SP-EN-IP 24 V DCETHERNET/IPEthernet gateway
– R1.190.0150.0
SP-PRO STARTER SET –Contents: SP-SCON, SP-SDIO, SP-PLAN, SP-MEMORY, SP-CABLE1
– R1.190.0100.0
SNS 4084K-A 24 V DCStandstill monitor0.5 - 99 Hz
Screw terminals, pluggable R1.188.3480.0
SNS 4084K-C 24 V DCStandstill monitor0.5 - 99 Hz
Spring-clamp terminals, pluggable R1.188.3490.0
SA-OR-S1-4RK-A 24 V DCRelay output module2 x 2 safe relay outputs
Screw terminals, pluggable R1.180.0080.0
SA-OR-S1-4RK-C 24 V DCRelay output module2 x 2 safe relay outputs
Spring-clamp terminals, pluggable R1.180.0430.0
SA-OR-S2-2RK-A 24 V DCRelay output module1 x 2 safe relay outputs
Screw terminals, pluggable R1.180.0320.0
SA-OR-S2-2RK-C 24 V DCRelay output module1 x 2 safe relay outputs
Spring-clamp terminals, pluggable R1.180.0440.0
Accessories *
SP-CABLE1 –PC connecting cable, M8 – RS232
– R1.190.0090.0
SP-CONVERTER – USB – RS232 converter – R1.190.0250.0
SP-CABLE3 –CAN cabel 2 x 2 x 0.34 mm2, shielded
– 00.102.5202.0
WKFN 2,5 E/35 GO-URL
–fasis – Multi-tier blockwith diodes
– 56.703.8755.9
APFN 2,5 E/35 – fasis - End plate – 07.312.7355.0
The Wieland SISTEMA library enables the easy selection of samos pro modules and therefore the calculation of the PL reached according to EN13849-1.
The team at Wieland will, of course, also be happy to support you when it comes to implementing applications.
* Further accessories available on request.
Overview of devices | Order no.
samos® pro
sam
os®
pro
Wieland worldwide
Company Headquarters: Wieland Electric GmbH Brennerstraße 10 – 14 D-96052 Bamberg
Sales and Marketing Center: Wieland Electric GmbH Benzstraße 9 D-96052 Bamberg
Phone +49 9 51 93 24-0 Fax +49 9 51 93 24-198 www.wieland-electric.com www.gesis.com [email protected]
0152.4 E 11/10
Informational brochures for ordering anddownloading from our websites For technical details use our eCatalog on our website at www.wieland-electric.com Subject to technical modifications! gesis®, podis®, samos®, taris® are registeredtrademarks of Wieland Electric GmbH
USAWieland Electric Inc.49 International RoadBurgaw, N.C. 28425Phone +1-910-259 5050Fax +1-910-259 3691 [email protected]
CANADAWieland Electric Inc.2889 Brighton RoadOakville, Ontario L6H 6C9Phone +1-905-829 8414 Fax +1-905-829 8413 [email protected]
GREAT BRITAINWieland Electric Ltd.Riverside Business Centre, Walnut Tree CloseGU1 4UG Guildford/Surrey Phone +44-1483-531 213Fax +44-1483-505 029 [email protected]
FRANCEWieland Electric SARL.103, Chemin de Ronde78290 Croissy-sur-SeinePhone +33-1-30 15 07 07Fax +33-1-30 15 07 14 [email protected]
SPAINWieland Electric S.L.C/ Maria Auxiliadora 2 bajos08017 BarcelonaPhone +34-93-252 3820Fax +34-93-252 3825 [email protected]
ITALYWieland Electric S.r.l.Via Edison, 20920019 Settimo MilanesePhone +39-02-48 91 63 57Fax +39-02-48 92 06 85 [email protected]
POLAND Wieland Electric Sp. Zo.o.Poznań Swadzimul. Św. Antoniego 862-080 Tarnowo PodgórnePhone +48-61-84 09-101 Fax +48-61-84 07-166 [email protected]
DENMARKWieland Electric GmbHBrennerstraße 10 – 14D-96052 BambergPhone +45-70-26 66 35Fax +45-70-26 66 [email protected]
CHINAWieland Electric TradingUnit 2106 International Soho City 889 Renmin RoadHuangpu DistrictPRC- Shanghai 200010Phone +86-21-63 555 833Fax +86-21-63 550 090 [email protected]
CZECH REPUBLIC (Production)Wieland Electric s.r.o.Nadražni 1557356 01 SokolovPhone +420-352-302 011Fax +420-352-302 027
Agencies: You can reach us worldwide in more than 40 countries. Find the contact adress at: www.wieland-electric.com
Our subsidiaries