safely delivering value engineered … · 2 this in-house capability and design expertise ... 500...
TRANSCRIPT
Rev
. 03/
2014
Herbosch-Kiere n.v.
Haven 1558 - Sint Jansweg 7
9130 Kallo
Belgium
Tel: +32 (0)3 575 02 82
Fax: +32 (0)3 575 13 10
www.herbosch-kiere.com
SAFELY DELIVERING VALUE ENGINEERED MARINE PROJECTS
1www.herbosch-kiere.com
Contents
Introduction 2-3
Organisation 4
SHEQ Management 5
Safety and Health 6
Quality 7
Environmental 8
Personnel 9
Specialist Plant & Equipment 10-29
Projects 30-50
Over the past century Herbosch-Kiere has played
an important role within Europe on marine, harbour
and river construction projects.
> Quays & Harbour walls
> Jetties & Dolphins
> Bridges
> Offshore installations
> Beach consolidation works
We specialise in heavy lifting over water, marine
salvages and dredging works. Herbosch-Kiere
work principally on projects within a marine
environment utilising in-house vessels and plant.
2
This in-house capability and design expertise
enables us to offer bespoke temporary and
permanent work solutions. From our offices we
focus on projects which have a high degree of
technical difficulty or logistical problems where our
marine experienced engineers provide the client
with safe innovative and economic solutions. We
continue to invest in marine plant to supplement
our existing substantial fleet of lifting and floating
equipment to ensure we have the right equipment
and resources to carry out specialist work. In
Antwerp we have a dedicated quay and workshop
where our marine plant is maintained to the highest
standards by company technicians. This workshop
Introduction
in the Port of Antwerp, one of the biggest ports of
Europe, provides us the opportunity to offer a global
marine service.
Within our fleet, our company owns the Albatros
and the Atlantis. The Atlantis is a versatile vessel
ideal for offshore renewable works, including cable
repair, recovery and installation. It also has the
ability to ground which is ideal for shallow water
cable and fibre optic laying.
Together with our subsidiairy company in the
United Kingdom and our participations in the
companies ‘Scaldis’ and ‘CTOW’ we aim to realise
sustainable projects. Our experience and knowledge
has given us several impressive references.
3
EIFFAGE
Herbosch-Kiere, is a member of the Eiffage Benelux
Group, which in turn is part of Eiffage France – one of
the largest civil, building and facilities management
contractors in Europe. Eiffage France employs some
70,000 people, has an annual turnover in excess of
€14 billion, with an international network of
500 subsidiaries. This includes construction,
concessions, roads, civil engineering, energy and
steelwork.
The financial stability of our long-established
parent group is reassuring for both us and our clients.
We can also call upon their considerable skills and
resources, including a substantial marine plant fleet.
Visit our website on www.herbosch-kiere.com
4 www.herbosch-kiere.com
Organisation
Operations
Legal/Insurance Department
Kris Guldix/ Marijke Vanhooymisen
SHEQ
Cecile Van Raemdonck
ISM
Designated Person ISM Geert Van mulders
Human Resources
Patrick De Bock
Communication and Marketing
Lien Truwant
Logistics Vessels
Geert Van Mulders
Plant Department
Geert Van Mulders
Engineering Department
Diederik Bracke
Operations Department 1
Jan Himpe
Operations Department 2
Etienne Clement
Operations Department 3Special Marine Projects
Frank Jacobs
Managing Director
Benny De Sutter
Finance
Sabine Van Meel
5www.herbosch-kiere.com
SHEQ Management
improve the SHEQ performance of the company and
to produce industry best results. This will be
achieved by the nurturing of a positive culture,
avoiding risk exposure through changing work type,
methods or techniques, thereby designing out the
risks at the planning and design stage and ensuring
the implementation and adherence of safe systems
of work. To achieve this the company has developed
an approved integrated management system which
encompasses VCA**, ISO 9001:2008 and ISO
14001:2004 and follows the management process
set out below.
The Managing Director of Herbosch-Kiere, being
ultimately responsible for the SHEQ performance of
the company, its staff, workforce and operations on
site, actively ensures all SHEQ matters are properly
discharged by Herbosch-Kiere employees. Through
an integrated SHEQ management structure, suitably
qualified and experienced employees, rigorous
training and continuous improvement, Herbosch-
Kiere pursues a zero incident strategy towards
safety, environmental and quality issues. There is
real resolve and strong commitment from the
directors and senior managers to continuously
6 www.herbosch-kiere.com
Safety and Health
The Directors will ensure that Herbosch-Kiere
continues to meet its legal and moral obligations
through communication, consultation and involvement
of all employees and other stakeholders who may
be affected by our activities. The Herbosch-Kiere
Health & Safety Policy defines how we will manage
the health, safety and welfare of those affected by our
operations. It specifies systems and responsibilities
to ensure that the company’s activities are carried out
not only within the requirements of the law but also to
fulfill our corporate social responsibilities.
The Health and Safety Policy is supported by all
our procedures and systems. All employees, both
direct and sub-contract, are required to observe
the H&S policy. Herbosch-Kiere actively promotes
the involvement of stakeholders in providing a safe
place of work.
The company continually assesses its safety
performance and is committed to continuous
improvement. We have a commitment to developing
and training all our employees to enable them to
safely fulfill their roles.
Herbosch-Kiere’s foremost objective is the provision and maintenance of a safe
and healthy environment for clients, employees, contractors, visitors and the
general public. Achieving this requires the implementation of effective systems for
the assessment, control, monitoring and review of all our operations.
7www.herbosch-kiere.com
Quality
Herbosch-Kiere aims to ensure that all its products and services exceed the
expectations of our clients, by being of superior quality, delivered ahead of time
and within budget.
We consult with in-house and external experts to
assemble our quality plan to ensure that the work
we carry out can be planned, administered and
delivered to verifiable quality standards.
With each step of the process, from tender
review to completion certificate, quality assurance
is central to the way we do business. Supply chain
management plays an important role in this
respect. We assess the product specifications of
our suppliers so that we may agree standards and
establish clearly defined quality benchmarks to
which suppliers must adhere.
Our systems and processes dictate the way we
undertake all aspects of our work. We select,
appraise and review our supply chain partners:
suppliers, sub-contractors and designers. We
assess our suppliers’ product and specifications,
their quality systems, including quality benchmarks,
testing regimes, resource and available capacity to
ensure that they will be able to satisfy the
requirements of each particular project.
During the supply phase we audit their
performance. We collate and analyse performance
data and compare against defined and agreed
parameters making constructive criticisms to
encourage them to continuously improve their
performance.
8 www.herbosch-kiere.com
Environmental
Herbosch-Kiere is acutely aware of the environmental responsibility placed upon
them when completing works. At all project stages; tendering, planning and
construction we will use techniques, methods and equipment to minimise the
impact on the local and global environment and improve sustainability.
Our teams are trained and have the experience and
capability to adapt our methods to accommodate
any unforeseeable situations, and our site systems
permit us to respond quickly to any incident.
Herbosch-Kiere monitors its own and
subcontractors performance, implementing a
policy of technical advances and continuous
improvements to ensure compliance with legislation
and other requirements.
Employing a risk assessment based process to
minimise environmental impacts, we initially
identify potential hazards and then develop optimal
mitigation techniques and systems.
We are continually investigating new ways to
promote greater sustainability, conserve energy and
natural resources, and use more environmentally
responsible materials and techniques.
9www.herbosch-kiere.com
Personnel
Herbosch-Kiere recognize that an organisation is only as good as the people it
employs. We are able to draw on the experience of a team of professionals who
can demonstrate outstanding knowledge of marine construction, demolition and
heavy lifting.
issues are openly discussed. Our site and marine
based personnel are highly skilled and experienced
in maritime works.
Regular training on current Health and Safety
and maritime regulations and new specialist plant
ensures that the works, its people and equipment
achieve optimum efficiency with maximum safety.
Our record of success is based on our ability to
assemble the right team for the job.
Through recruitment, continual improvement,
regular training and career development Herbosch-
Kiere ensure their employees are motivated and
sufficiently experienced and qualified to plan,
design and manage complex maritime projects.
With yearly assessment interviews and an
individually fitted training programme with regular
in house development courses, personnel are
equipped to continue working in an environment
where a positive approach is valued and critical
10 www.herbosch-kiere.com
Specialist Plant & Equipment
Name of SpecialiSt equipmeNt fuNctioN
Marine Vessels
Atlantis Multi-function vessel
Octopus Jack-up barge
Albatros Dipper dredger
Gaverland Flatbed barge
Seadevil Flatbed barge
Waasland Flatbed barge
Scheldeland Flatbed barge
Sainctelette III & IV Joint barge
Crawler Cranes
AM 11320 derrick Crawler crane 410T
AM 11320 Crawler crane 325T
Sumitomo SCX2800 Crawler crane 275T
AM 9310 Crawler crane 165T
Sumitomo SCX1500 Crawler crane 135T
AM 7260 Crawler crane 80T
Sumitomo SC 700 Crawler crane 70T
Piling Equipment
PVE 110M Vibration hammer
PVE 52M Vibration hammer
PVE 50M Vibration hammer
D62 Diesel hammer All lifting tables for cranes are to be checked by the charterer, Herbosch-Kiere will have no responsibility for the accuracy of the information provided. For a full list of HK plant and equipment please refer to our website www.herbosch-kiere.co.uk. Any accommodation shown is for Herbosch-Kiere personnel only.
Herbosch-Kiere maintain that the success of any project, particularly those which
are carried out in the harsh and unforgiving maritime environment depend directly
upon the provision of reliable, well designed and maintained plant and equipment.
in antwerp we have our own dedicated quay, workshop
and technicians to ensure that our plant is in the
best possible condition when it leaves for each new
project. our comprehensive facility also allows us to
design and fit specialist equipment such as piling
gates, access platforms, and to place on board the
required cranage so that when the barge arrives
on station it is immediately ready for work.
11www.herbosch-kiere.com
Draught loaded 2.45m
carrying capacity Deepsea 2,200 ton
coastal Waters 2,500 ton
Stone carrying capacity Deepsea 1,520 ton
coastal Waters 1,850 ton
Working deck 22.0m x 57.0m
Deck load 10 ton/m2
Stone loading boxes Dimensions 4 x 9.70m x 15.00m
propulsion 2 azimuth thrusters - 2 x 800 Hp
1 bowthruster 500Hp
1 bowthruster 1000Hp
mooring system 4 x 500 meter
max pulling power 40 ton
max Holding power 75 ton
Dynamic positioning Simrad albatros aDp 701 mK 1
classification lloyd’s Register of Shipping
100 a1 Deep Sea umS
accommodation 10 single berths
Removable forecastle deck 12.6m
Spuds 2 spudguides
2 spud of 1,22m - length 28m
Type Self propelled marine working pontoon
Dimensions Length 81.0m Breadth 22.0m Depth 3.8m
Certified DP1A copy of the DP1 trial report is available on request
Vessels
atlantis
Vessels
12 www.herbosch-kiere.com
Type Jack-up barge
Dimensions Length 30.335m Breadth 14.77m Depth 2.43m
IJUBOA CertifiedA copy of the certificate is available on request
Mooring system 4 x 200 meterPP: 5 ton
Classification Veritas I 3/3 self elevation platform NP sheltered waters
VHF OT 2805
Accommodation Lower Container Kitchen + operation roomUpper Container Shower + 2 berths
Powerpack 2 Hydr pump - capacity: 30 Kw
Generator set Capacity: 180 KVA
Auxiliary set Capacity: 60 KVA
Lifting speed 0.4m/min
Length of spuds 38 meter
Diameter of spuds 1020 mm
Working conditions Waterdepth maximum: 20 meterDeckload: 570 ton - 3 ton/m2
Wave height: 2 metercurrent: 2m/secWindspeed: 13m/sec
Fuel capacity 14 m3
Water capacity 8 m3
octopus
13www.herbosch-kiere.com
Type Dipper dredger
Dimensions Length 50.00m Breadth 15.00m Depth 2.80m
Gross Weight 639 ton
accommodation 5 single berths
loading capacity 4 ton/m2
main motors 2 x 612 pk
electrical capacity 2 x 420 kW
Bow thruster : 475pk
equiliBRium cRaNe :max. depth below wl : 20.00m
max Reach 28.00m
capacity 14 ton
Bucket 5,5 / 5,75 m3
Spuds 3 spud guides
3 spuds 1,00 m x 1,00 m - 25.00m length
albatros
Vessels
14 www.herbosch-kiere.com
Type Flatbed barge
Dimensions Length 60.00m Breadth 22.00m Depth 4.00m
Draught empty 0.75m
maximum draught 3.20m
loading capacity 3,200 ton
accommodation 1 x mess room
1 x galley
8 berths
Spuds Number 2
length 28m
Weight 28 t
Diameter 1.22m
Spud guides 3
Gaverland
Spud winch x 2 Pulling power
Anchor winch x 4 Pulling power
40t for cable diameter 42mm (max 90m)
40t for cable diameter 42mm (max 400m)
15www.herbosch-kiere.com
Draught 0.60m
maximum draught 2.74m
loading capacity 2.114 ton
accommodation 2 crew containers with
1 meeting room, 1 mess,
4 single berths
Spuds length 29m
Weight 24 t
Diameter 0.914m
Spud guides 3
Type Flatbed barge
Dimensions Length 55.02m Breadth 14.12m Depth 3.00m
Seadevil
Spud winch Pulling power
Anchor winch Pulling power
40t for cable diameter 32mm (max 90m)
40t for cable diameter 36mm (max 400m)
Vessels
16 www.herbosch-kiere.com
Type Flatbed barge
Dimensions Length 60.00m Breadth 13.85m Depth 3.00m
Waasland
Spud winch x 2 Pulling power
Anchor winch x 2 Pulling power
Mooring winch x 2 Pulling power
25t for cable diameter 32mm (max 90m)
25t for cable diameter 36mm (max 250m)
25t for cable diameter 32mm (max 150m)
Draught 0.55m
maximum draught 2.70m
loading capacity 1812 ton
accommodation 1 x mess room
4 single berths
Spuds length 29m
Weight 26 ton
Diameter 0.609m
Spud guides 3
coupling can be coupled with Sainctelette
iii & iV (total coupled breadth 26m)
17www.herbosch-kiere.com
Draught 0.54m
maximum draught 2.50m
clearance 3.60m
tonnage 1,380 ton
loading capacity offshore 1,000 ton
inland 1,500 ton
accommodation 1 x mess room
Spuds length 29m
Weight 22.5 ton
Diameter 0.609m
Spud guides 3
Type Flatbed barge
Dimensions Length 55.00m Breadth 13.50m Depth 2.80m
Spud winch Pulling power
Anchor winch Pulling power
25t for cable diameter 34mm (max 90m)
15t for cable diameter 34mm (max 120m)
Scheldeland
Vessels
18 www.herbosch-kiere.com
Sainctelette iii & iV
Draught empty 0.15m
Draught loaded 2.55m
tonnage 105.89 ton
loading capacity 356.786 ton
Spuds 1 length variable, dia 609
coupleD
Draught empty 0.15m
Draught loaded 2.55m
tonnage 211.78 ton
loading capacity 713.572 ton
Spuds 2 length variable, dia 609
Type Joint barge
Dimensions Length 30.06m Breadth 6.10m Depth 2.85m
Dimensions coupled Length 29.40m Breadth 12.00m Depth 2.85m
12m
19www.herbosch-kiere.com
AM 11320 Guy Derrick
Radius Lifting capacity (ton)
m Boom:30,5mMast:27m
Boom:30,5mMast:30,5m
Boom:33,5Mast:36,6m
Boom:36mMast:39m
Boom:39mMast:42m
Boom:42mMast:45m
10 408 408 408 408 381 34112 405 408 408 408 384 34414 382 399 406 408 385 34916 327 358 400 403 388 35418 283 309 350 383 377 36020 248 270 309 337 368 36522 218 239 275 302 328 34524 193 212 246 271 296 32126 169 189 221 245 269 29128 168 200 222 244 26630 180 202 223 24432 161 184 204 22434 167 187 20736 171 19038 17540 160
Lifting table
Type: Crawler crane 410T
20 www.herbosch-kiere.com
AM 11320
Lifting table
Boom length Boom length Boom length Boom length
27.43 30.5 33.53 36.58
Radius Lifting capacity Height Radius Lifting
capacity Height Radius Lifting capacity Height Radius Lifting
capacity Height
(m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m)
6.20 322.04 29.30 6.20 288.29 32.30 7.00 260.61 35.40 7.50 238.15 38.407.00 277.73 29.20 7.00 270.58 32.30 8.00 223.60 35.20 8.00 219.16 38.308.00 235.14 29.00 8.00 229.10 32.10 9.00 193.72 35.00 9.00 189.97 38.109.00 203.37 28.80 9.00 198.50 31.90 10.00 171.15 34.80 10.00 167.96 37.90
10.00 174.46 28.50 10.00 174.23 31.70 12.00 131.81 34.30 12.00 132.00 37.4012.00 132.29 27.80 12.00 132.04 31.10 14.00 105.56 33.60 14.00 105.76 36.8014.00 106.06 27.00 14.00 105.80 30.30 16.00 87.71 32.80 16.00 87.93 36.1016.00 88.22 25.90 16.00 87.95 29.40 18.00 74.67 31.80 18.00 74.89 35.2018.00 75.21 24.60 18.00 74.93 28.20 20.00 64.90 30.60 20.00 65.14 34.1020.00 65.43 23.00 20.00 65.15 26.90 24.00 50.90 37.60 24.00 51.13 31.5024.00 51.45 18.70 24.00 51.16 23.40 28.00 41.55 23.50 28.00 41.81 28.0026.00 46.33 15.50 28.00 41.79 18.10 32.00 34.75 17.20 32.00 35.00 23.20
36.00 29.12 15.60
Boom length Boom length Boom length Boom length
39.62 42.67 45.72 48.77
Radius Lifting capacity Height Radius Lifting
capacity Height Radius Lifting capacity Height Radius Lifting
capacity Height
(m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m)
7.90 218.52 41.40 8.30 201.83 44.40 8.70 187.22 47.40 9.10 173.67 50.508.00 214.41 41.40 9.00 182.93 44.30 9.00 179.54 47.40 10.00 155.71 50.309.00 186.76 41.20 10.00 161.74 44.10 10.00 158.47 47.20 12.00 125.87 50.00
10.00 165.19 41.00 12.00 131.17 43.70 12.00 128.41 46.90 14.00 104.72 49.5012.00 131.76 40.60 14.00 105.27 43.20 14.00 104.99 46.40 16.00 86.87 49.0014.00 105.00 40.00 16.00 87.43 42.60 16.00 87.14 45.80 18.00 73.78 48.3016.00 87.67 39.30 18.00 74.63 41.80 18.00 74.06 45.10 20.00 64.05 47.6018.00 74.62 38.50 20.00 64.62 41.00 20.00 64.32 44.30 24.00 49.99 45.8020.00 64.86 37.60 24.00 50.59 38.90 24.00 50.28 42.40 28.00 40.69 43.6024.00 50.85 35.30 28.00 41.28 36.20 28.00 40.97 39.90 32.00 33.87 40.8028.00 41.53 32.20 32.00 34.46 32.70 32.00 34.15 36.80 38.00 26.59 35.2032.00 34.72 28.20 38.00 27.21 25.20 38.00 26.88 30.50 44.00 21.59 27.0038.00 27.47 18.70 42.00 23.13 16.90 44.00 21.86 20.20 48.00 17.79 18.20
Type: Crawler crane 325T
21www.herbosch-kiere.com
Sumitomo SCX2800 Type: Crawler crane 275T
Lifting table
Working Mass & Ground Pressure:
Shoe width Mass Pressure
1120mm 223.0t 124.0kPa <1.27kg/cm2>
Note: Working mass shown above is with 15.24m basic boom, 102.8 ton counterweight, 18 ton carbody weight and optional 275t hook block.
Boom length (m)67.05 70.10 73.15 76.20 79.25 82.30 85.35 88.40 91.45
Working radius (m)12.0 60.5 54.0/12.5 50.3/12.9 46.5/13.4 42.7/13.814.0 59.7 54.0 50.0 46.2 42.5 38.3/14.3 34.2/14.7 30.4/15.2 27.0/15.616.0 56.2 53.1 49.2 45.6 42.0 37.2 33.4 29.9 26.818.0 49.3 48.7 47.7 44.5 40.9 35.9 32.3 28.8 25.820.0 43.7 43.2 42.3 41.4 39.2 34.4 30.9 27.7 24.822.0 39.1 38.7 37.9 37.0 36.2 32.7 29.6 26.4 23.624.0 35.2 34.9 34.0 33.3 32.5 31.0 28.2 25.2 22.526.0 31.9 31.6 30.8 30.2 29.4 29.2 27.1 24.1 21.528.0 29.0 28.7 28.0 27.3 26.7 26.5 25.6 23.0 20.530.0 26.4 26.2 25.6 25.0 24.2 24.2 23.5 22.1 19.532.0 23.8 23.9 23.4 22.8 22.2 22.1 21.5 20.7 18.634.0 21.7 21.7 21.3 20.9 20.2 20.2 19.6 19.0 17.836.0 19.7 19.7 19.4 19.1 18.6 18.6 18.0 17.3 16.738.0 18.1 18.1 17.7 17.3 17.0 17.1 16.5 15.8 15.340.0 16.5 16.6 16.2 15.8 15.5 15.6 15.1 14.5 14.042.0 15.1 15.1 14.8 14.5 14.1 14.2 13.8 13.3 12.844.0 14.0 14.0 13.6 13.3 12.8 13.0 12.6 12.1 11.646.0 12.8 12.8 12.5 12.1 11.8 11.8 11.5 11.1 10.648.0 11.8 11.8 11.5 11.1 10.8 10.8 10.5 10.1 9.750.0 10.9 10.9 10.5 10.2 9.6 9.9 9.6 9.1 8.852.0 10.1 10.1 9.6 9.3 9.0 9.1 8.7 8.3 8.054.0 9.3 9.3 8.9 8.6 8.2 8.3 8.0 7.5 7.256.0 8.6 8.6 8.2 7.9 7.5 7.5 7.2 6.8 6.558.0 8.0 7.9 7.5 7.2 6.8 6.9 6.5 6.1 5.860.0 7.4/59.8 7.3 6.9 6.6 6.2 6.3 29.95.9 5.5 5.162.0 6.8 6.4 6.0 5.6 5.7 5.4 4.9 4.664.0 6.7/62.4 5.8 5.5 5.1 5.1 4.8 4.4 4.066.0 5.6/65.1 5.0 4.6 4.6 4.3 3.9 3.568.0 4.7/67.7 4.1 4.2 3.9 3.4 3.070.0 3.7 3.7 3.4 3.0 2.572.0 3.7/70.4 3.4 3.0 2.5 2.074.0 3.2/73.0 2.6 2.2 1.676.0 2.3/75.6 1.8 1.278.0 1.578.3 1.5
Boom length (m)15.25 18.30 21.35 24.40 27.45 30.50 33.50 36.55 39.65 42.65 45.70 48.75 51.80 54.85 57.90 60.95 64.00
Working radius (m)4.3 275.04.5 269.4 243.0/4.85.0 244.3 242.4 216.0/5.25.5 223.5 223.3 215.1 215.2/5.76.0 205.8 205.6 205.3 204.9 189.0/6.1 162.0/6.87.0 177.6 177.3 177.0 176.6 176.3 162.0 148.5 135.0/7.58.0 155.9 155.7 155.4 155.1 154.8 154.6 147.8 134.8 120.8 121.5/8.4 108.0/8.99.0 138.8 138.6 138.3 138.0 137.6 136.8 132.8 130.5 119.8 121.5 108.0 94.5/9.3 93.2/9.8
10.0 125.0 124.8 124.5 124.1 123.9 121.0 117.6 116.0 113.0 110.0 107.4 94.5 93.0 81.0/10.2 78.3/10..7 67.5/11.1 65.6/11.612.0 102.0 102.2 102.1 102.0 100.1 95.4 94.6 92.5 90.3 88.4 86.5 86.5 84.5 81.0 77.5 67.5 65.414.0 81.9 82.0 81.9 81.7 81.5 79.9 79.5 77.9 76.1 74.7 73.2 73.2 71.6 70.3 68.9 67.5 64.516.0 75.1/14.9 68.0 67.9 67.8 67.5 67.3 68.4 67.0 65.6 64.5 63.2 63.2 61.9 60.7 59.7 58.6 57.418.0 59.8/17.6 57.7 57.6 57.3 57.0 58.2 58.0 57.4 56.5 55.4 55.4 54.2 53.2 52.4 51.5 50.420.0 50.0 49.9 49.7 49.5 49.3 50.4 50.2 49.9 49.7 49.1 48.1 47.2 46.5 45.7 44.722.0 49.5/20.2 43.9 43.6 43.5 43.2 44.2 44.0 43.7 43.6 43.4 43.0 42.2 41.5 40.9 40.024.0 41.8/22.8 38.7 38.5 38.2 39.3 39.0 38.7 38.7 38.4 38.1 37.9 37.5 36.9 36.026.0 35.7/25.5 34.5 34.2 35.2 35.0 34.7 34.5 34.3 34.0 33.8 33.7 33.4 32.728.0 31.2 30.8 31.8 31.6 31.2 31.2 30.9 30.6 30.3 30.2 30.0 29.730.0 31.0/28.1 28.0 29.0 28.7 28.3 28.2 28.0 27.7 27.4 27.2 27.1 26.732.0 27.0/30.8 26.5 26.2 25.8 25.7 25.5 25.2 24.9 24.7 24.5 24.234.0 25.0/33.4 24.1 23.7 23.6 23.3 23.0 22.7 22.6 22.3 22.136.0 22.2 21.8 21.7 21.4 21.1 20.8 20.7 20.5 20.138.0 20.2 20.0 19.7 19.3 19.1 19.0 18.7 18.440.0 19.7/38.7 18.6 18.2 17.8 17.6 17.5 17.2 16.942.0 17.7/41.3 16.9 16.6 16.2 16.1 15.8 15.644.0 15.8 15.3 15.1 14.9 14.6 14.346.0 14.3 14.0 13.8 13.6 13.248..0 14.1/46.8 13.0 12.8 12.5 12.250.0 12.2 12.0 11.6 11.352.0 11.2/51.9 10.8 10.554.0 10.1 9.756.0 9.9/54.5 9.058.0 8.6/57.2
22 www.herbosch-kiere.com
AM 9310Type: Crawler crane 165T
Lifting tableBoom length Boom length Boom length Boom length
27.43 30.48 33.53 36.58
Radius Lifting capacity Height Radius Lifting
capacity Height Radius Lifting capacity Height Radius Lifting
capacity Height
(m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m)
6.10 135.41 29.26 6.40 124.00 32.31 6.71 95.03 35.36 7.32 82.97 38.107.62 92.66 28.96 7.62 92.55 32.00 7.62 78.03 35.05 7.62 78.07 38.109.14 69,96 28.65 9.14 69.83 31.70 9.14 59.76 34.75 9.14 59.81 37.80
10.67 55.92 28.04 10.67 55.79 31.39 10.67 48.15 34.44 10.67 48.21 37.4912.19 46.39 27.43 12.19 46.25 30.78 12.19 40.14 34.14 12.19 40.21 37.1915.24 34.15 25.91 15.24 34.00 29.57 15.24 29.64 32.92 15.24 29.71 36.2718.29 26.75 24.08 18.29 26.61 27.74 18.29 23.22 31.39 18.29 23.30 34.7521.34 21.70 21.34 21.34 21.56 25.60 21.34 18.79 29.26 21.34 18.87 32.9224.38 18.07 17.68 24.38 17.93 22.56 24.38 15.58 26.82 24.38 15.66 30.7827.43 15.36 11.58 27.43 15.24 18.56 27.43 13.21 23.77 27.43 13.30 28.35
30.48 11.43 12.19 30.48 11.28 19.51 30.48 11.39 24.6933.53 9.73 12.50 33.53 9.84 20.12
36.58 8.56 13.11
Boom length Boom length Boom length Boom length
39.62 42.67 45.72 48.77
Radius Lifting capacity Height Radius Lifting
capacity Height Radius Lifting capacity Height Radius Lifting
capacity Height
(m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m)
7.62 92.33 41.15 8.23 81.66 44.20 8.53 65.58 47.24 8.84 72.80 50.299.14 69.59 41.15 9.14 69.43 22.20 9.14 59.29 47.24 9.14 69.11 50.29
10.67 55.54 40.84 10.67 55.37 43.89 10.67 47.69 46.94 10.67 55.04 49.9912.19 46.02 40.23 12.19 45.85 43.59 12.19 39.69 46.63 12.19 45.21 49.6815.24 33.75 39.32 15.24 33.56 42.67 15.24 29.16 45.72 15.24 33.21 49.0718.29 26.37 38.10 18.29 26.18 41.45 18.29 22.76 44.81 18.29 25.83 48.1621.34 21.32 36.58 21.34 21.13 39.93 21.34 18.32 43.59 21.34 20.77 46.9424.38 17.68 34.75 24.38 17.49 38.40 24.38 15.11 41.76 24.38 17.13 45.4227.43 15.03 32.31 27.43 14.85 36.27 27.43 12.79 39.93 27.43 14.50 43.5930.48 12.88 29.57 30.48 12.70 33.83 30.48 10.87 37.80 30.48 12.35 41.4533.53 11.15 25.91 33.53 10.97 30.78 33.53 9.33 35.05 33.53 10.62 39.3236.58 9.73 21.03 36.58 9.55 26.82 36.58 8.05 31.70 36.58 9.20 36.2739.62 8.45 13.41 39.62 8.36 21.64 39.62 6.99 27.74 39.62 8.02 32.92
42.67 7.35 14.02 42.67 6.08 22.56 42.67 7.01 28.6545.72 5.30 14.33 45.72 6.14 23.16
48.77 5.39 14.63
23www.herbosch-kiere.com
Lifting table
Sumitomo SCX1500 Type: Crawler crane 135T
Working Mass & Ground Pressure:
Shoe width Mass Pressure
965mm 128.0t 95.0kPa <0.97kg/cm2>
Note: Working mass shown above is with 15.0m basic boom with 7.5m tapered top section, 46ton counterweight, 1.7ton auxiliary weight, 9.5ton carbody weight and 135ton hook block.
Boom length (m)
15.0 18.0 21.0 24.0 27.0 30.0 33.0 36.0 39.0 42.0 45.0 48.0 51.0 54.0 57.0 60.0 63.0 66.0 69.0 72.0 75.0Working
radius (m)
4.0 135.0/4.5
5.0 134.5 110.0 99.0/5.5
6.0 113.2 110.0 99.0 88.0/6.1 77.0/6.6
7.0 97.6 97.5 97.3 88.0 77.0 66.0/7.1 66.0/7.6
8.0 79.5 79.5 79.5 79.6 77.0 66.0 66.0 55.5/8.2 55.0/8.7
9.0 66.2 66.3 66.3 66.5 66.4 66.0 66.0 55.0 55.0 44.0/9.2 44.0/9.7
10.0 56.9 56.8 56.8 56.9 56.8 56.8 56.7 55.0 55.0 44.0 44.0 33.0/10.2 33.0/10.8 33.0/11.3 33.0/11.8
12.0 44.0 44.0 43.9 44.0 43.9 43.9 43.7 43.7 43.6 43.6 43.4 33.0 33.0 33.0 33.0 22.0/12.4 22.0/12.9 22.0/13.4 22.0/13.9
14.0 33.8 35.7 35.5 35.6 35.5 35.5 35.4 35.3 35.2 35.2 35.0 33.0 33.0 33.0 33.0 22.0 22.0 22.0 22.0 19.9/14.4 17.2/15.0
16.0 31.1/14.5 29.9 29.7 29.8 29.7 29.7 29.5 29.5 29.3 29.3 29.1 29.1 29.0 28.8 28.7 22.0 22.0 22.0 20.5 18.3 16.318.0 26.3/17.1 25.5 25.5 25.4 25.4 25.2 25.1 25.0 25.0 24.8 24.8 24.7 24.5 24.4 22.0 22.0 20.9 18.6 16.6 14.720.0 22.6/19.7 22.3 22.1 22.1 21.9 21.8 21.7 21.6 21.5 21.5 21.3 21.2 21.0 21.0 20.9 19.3 17.1 15.1 13.422.0 19.7 19.5 19.4 19.3 19.2 19.1 19.0 18.8 18.8 18.7 18.5 18.4 18.4 18.2 17.8 15.7 13.9 12.224.0 19.3/22.3 17.4 17.3 17.2 17.1 16.9 16.9 16.7 16.7 16.5 16.4 16.2 16.2 16.0 15.9 14.6 12.8 11.226.0 16.6/24.9 15.6 15.5 15.3 15.2 15.1 14.9 14.9 14.8 14.6 14.5 14.4 14.3 14.1 13.5 11.8 10.328.0 14.5/27.5 14.0 13.8 13.7 13.6 13.5 13.4 13.3 13.1 13.0 12.9 12.8 12.6 12.5 11.0 9.530.0 12.7 12.6 12.4 12.4 12.2 12.1 12.0 11.8 11.7 11.6 11.5 11.3 11.2 10.2 8.832.0 12.7/30.1 11.5 11.4 11.3 11.1 11.0 10.9 10.7 10.6 10.5 10.4 10.2 10.1 9.5 8.234.0 11.2/32.7 10.4 10.3 10.1 10.1 9.9 9.8 9.6 9.6 9.4 9.3 9.1 8.9 7.636.0 9.9/35.3 9.5 9.3 9.3 9.1 8.9 8.8 8.7 8.6 8.4 8.3 8.1 7.038.0 8.8/37.9 8.6 8.5 8.4 8.2 8.0 8.0 7.8 7.7 7.5 7.3 6.540.0 7.9 7.9 7.7 7.5 7.4 7.3 7.1 7.0 6.9 6.7 6.142.0 7.8/40.5 7.3 7.1 6.9 6.8 6.7 6.5 6.4 6.2 6.1 5.644.0 7.0/43.1 6.6 6.4 6.2 6.2 6.0 5.9 5.7 5.5 5.246.0 6.2/45.7 5.9 5.8 5.7 5.5 5.4 5.2 5.0 4.848.0 5.5 5.3 5.2 5.1 4.9 4.8 4.6 4.450.0 5.4/48.3 4.9 4.8 4.6 4.5 4.3 4.1 3.952.0 4.8/50.9 4.5 4.3 4.1 3.9 3.7 3.554.0 4.3/53.2 3.9 3.7 3.5 3.3 3.156.0 3.6/55.8 3.3 3.1 2.9 2.758.0 3.0 2.8 2.6 2.460.0 2.9/58.4 2.5 2.3 2.162.0 2.3/61.0 2.0 1.864.0 1.7/63.6
24 www.herbosch-kiere.com
AM 7260Type: Crawler crane 80T
Boom length Boom length Boom length
21.34m 24.38m 27.43m
Radius Lifting capacity Height Radius Lifting
capacity Height Radius Lifting capacity Height
(m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m)
4.57 70.85 22.86 6.10 43.04 25.91 6.10 43.03 28.966.10 43.04 22.86 9.14 23.70 24.99 9.14 23.66 28.359.14 23.72 21.95 12.19 16.08 23.77 12.19 16.03 27.13
12.19 16.10 20.42 15.24 11.99 22.25 15.24 11.95 25.9115.24 12.02 18.29 18.29 9.45 19.81 18.29 9.40 23.7718.29 9.47 15.24 21.34 7.70 16.15 21.34 7.65 21.0321.34 7.21 10.06 24.38 6.42 10.67 24.38 6.38 17.37
27.43 5.40 10.97
Boom length Boom length Boom length
33.53m 36.58m 39.62m
Radius Lifting capacity Height Radius Lifting
capacity Height Radius Lifting capacity Height
(m) (Ton) (m) (m) (Ton) (m) (m) (Ton) (m)
6.71 37.08 34.75 7.01 34.63 37.80 9.14 23.59 40.549.14 23.70 34.14 9.14 23.65 37.49 12.19 15.98 39.62
12.19 16.11 33.22 12.19 16.04 36.58 15.24 11.91 38.7115.24 12.04 32.00 15.24 11.97 35.36 18.29 9.37 37.4918.29 9.50 30.48 18.29 9.44 34.14 21.34 7.64 35.6621.34 7.77 28.35 21.34 7.70 32.31 24.38 6.37 33.8324.38 6.51 25.91 24.38 6.44 29.87 27.43 5.41 31.3927.43 5.55 22.56 27.43 5.48 27.13 30.48 4.66 28.3530.48 4.79 17.98 30.48 4.73 23.47 33.53 4.05 24.6933.53 4.18 10.67 33.53 4.12 18.90 36.58 3.55 19.51
36.58 3.61 11.28 39.62 3.12 11.58
Lifting table
25www.herbosch-kiere.com
Sumitomo SC 700Type: Crawler crane 70T
Lifting table
Boom length 9.8 18.95 22.00 28.10 31.15 37.25 40.3
3.2 67.3
4.0 65.3
4.5 56.4 54.0
5.0 51.2 50.9 47.1
6.0 39.7 39.5 39.5 36.5 31.7
7.0 31.3 31.1 31.1 30.9 30.8 25.1
8.0 25.8 25.6 25.6 25.4 25.3 25.1 23.6
9.0 21.9 21.7 21.7 21.5 21.4 21.2 21.1
10.0 19.8 18.7 18.7 18.5 18.4 18.2 18.1
12.0 15.0 15.0 14.7 14.6 14.4 14.3
14.0 12.3 12.1 11.9 11.8 11.6 11.5
16.0 10.3 10.2 9.9 9.8 9.6 9.5
18.0 8.8 8.6 8.5 8.4 8.2 8.0
20.0 7.6 7.3 7.2 7.0 6.8
22.0 6.4 6.2 6.0 6.0
24.0 5.7 5.7 5.3 5.2
26.0 4.9 4.7 4.5
28.0 4.3 4.1 4.0
30.0 3.8 3.8
32.0 3.4 3.4
36.0 2.9
38.0 2.5
26
Piling equipment
www.herbosch-kiere.com
pVe 110m
Type Low frequency vibration hammer
ecc. moment 110kgm
max. frequency 1350rpm
centr. force 2198kN
total weight 12000/13500kg
Dyn. Weight 7000kg
amplitude 31mm
flow 956 l/min
27www.herbosch-kiere.com
pVe 52m
Type Vibration hammer
ecc. moment 52 kgm
max. frequency 28.3/1700 Hz/tpm
centr. force 1650/165 kN/ton
total weight 6500 kg
Dyn. Weight 5470 kg
amplitude 19 mm
flow 650 l/m
28
Piling equipment
www.herbosch-kiere.com
pVe 50m
Type Vibration hammer
ecc. moment 50 kgm
max. frequency 28.3/1700 Hz/tpm
centr. force 1600/160 kN/ton
total weight 6000 kg
Dyn. Weight 6750 kg
amplitude 15 mm
flow 561.5 l/min
29www.herbosch-kiere.com
D62
impact weight 6200 kg
total weight 11870 kg
energy per blow 224600 Nm
Blow rate 35-50/min
coNSumptioN
Diesel oil 20 lit.
lubrication 2 lit.
taNK VeRtical
Diesel oil 98 lit.
lubrication 31.5 lit.
ether 1.5 lt.
Type Diesel hammer
Dimensions Height 5910mm Width 828mm
30 www.herbosch-kiere.com
Herbosch-Kiere was awarded, along with 2
additional partners, the contract to extend the
Harbour of Ostend. These works were divided into
three phases. Two dams were built in the sea using
800,000 tons of stone. The aim was not only to
improve the naval accessibility of the harbour but
more importantly to provide increased protection to
the Belgian coast in the event of flooding.
Ostend Harbour Dam> Eastern Dam = 791m
> Western Dam = 694m
> 12 million tons = Volume of cargo that the harbour
of Ostend will be able to handle on completion of
the extension (today it stands at 8 million tons).
Projects Marine Construction
31www.herbosch-kiere.com
Delwaidedok NoordThe base of the quay of Delwaidedok, in Antwerp
required protection to avoid further erosion as a result
of the anchoring and maneuvering of ships. Erosion
at the quay edge was compromising its stability.
Herbosch-Kiere renovated the head of the quay
and delivered and installed bed protection across
the North quay. As a result asphalt mattresses are
now protecting the base of the quay over a length
of 1200m.
Works included:
> Demolition of the head of the quay wall.
> Repairing the existing quay walls.
> Placing new bollards with anchoring facilities.
> Installing scour protection along the quays.
The length of the quay each side is about 2km
(total length 4.7km). This container terminal, being
the MSC Home Terminal, is one of the largest
terminals in the world.
The works were executed in phases so as to keep
navigational disruption to a minimum. A special
lift frame was designed by Herbosch-Kiere to
accurately place each asphalt mattress.
Projects Marine Construction
32 www.herbosch-kiere.com
Construction of the second lock at the Waasland
Port – in the Port of Antwerp – the world largest lock.
With its 500 meter length, the second lock in the
Waasland Port is as long as 28 articulated buses
laid bumper to bumper. It is 68 meters wide which
is comparable to a 19-lane motorway. 22,000 tons
of structural steel was required to build the lock,
the bridges, and associated accessories, nearly
Lock Deurganckdokthree times more than the steel used to build the
Eiffel Tower (7,300 tons).
Herbosch-Kiere was awarded this project, along
with 4 additional partners.
The main works included:
> Construction of a bentonite slurry wall: 90,000m²
> Groundworks: 5,500,000m³
> Concrete works: 750,000m³
> Metal fabrication (lock doors): 8,700,000kg
> Steel bridges: 3,000,000kg
> Electro mechanical structures: 113,000kg
> Roadworks
www.deurganckdoksluis.be
ProjectsMarine Construction
33www.herbosch-kiere.com
HK was awarded the contract to execute the
following works by the Harbour of Rotterdam:
> Removing buoys 78 and 79
> Installation of new steel mooring dolphins
equipped with bollards and slip hooks
Anchor Facilities ‘Boeispan 78 & 79’
Projects
> Installation of power cables servicing existing piles
> Installation of bollards, ladders and structural
steel work
> Installation of cathodic protection to the piles
Marine Construction
34 www.herbosch-kiere.com
Groningen Seaports awarded Herbosch-Kiere the
construction of a new quay wall.
The works included:
> Combi-wall, piles (length 356m, ø 1620mm)
> Water depth of 20m
> Ground anchors
Eemshaven Julianahaven
> Concrete works, copping beams and foundations
> Ground works
> Dredging
Projects Marine Construction
35www.herbosch-kiere.com
Harbour Wijnegem‘De Scheepvaart’ awarded Herbosch-Kiere the contract to build a new harbour and renovate embankments, in Wijnegem.
The following works were successfully executed:
> Construction of a new quay of 1,150m to the left shore in front of the existing quay, keeping the existing sheet pile wall and parts of the concrete upper structure.
> Construction of a harbour with quay on the opposite side (water depth 5m) of 920m
and breaking down of the existing embankments. Dry and wet ground works (water depth 5m) between the existing and the new quay were included in these works.
> Supply of all infrastructure items enabling long- term mooring of ships (with the supply of waste containers, running water, electricity, car parking, etc).
> Road works and renovation of the existing routes
including all associated water drainage.
Key quantities:
> Dredging: 85,000 m³
> Sheet piles: 21,000 m²
> Ferroconcrete: 6,500 m²
> Ground anchors (partly by drilling the existing
sheet pile wall): 850 pcs.
> Groundwork: 110,000 m²
> Consolidation of road: 15,000 m²
> M&E works: € 250,000
ProjectsMarine Construction
36 www.herbosch-kiere.com
Projects
In the Harbour of Antwerp a ‘current deflecting
wall’ was installed by Herbosch-Kiere and partner.
This steel construction consisted of two distinct
parts: an underwater embankment and a lateral
guiding screen. The purpose of the CDW was to
divert currents in the Scheldt so as to reduce
sedimentation at the Deurganckdok.
Works included:
> Delivery and installation of 37 steel piles
(diameter 2,420mm and length 42m) with a total
volume of 3,100 tons
> Delivery and installation of 5,805m² steel sheet
piles (top edge being 7.60m under low water)
using the Albatros
Current Deflecting Wall
> Dredging of 81,000 m³ of hard sand to 16.75 m
below water
> Installation of 89,000 tons of rock armor
> Delivery and installation of steel screens
between the piles with a total weight of 810 tons
Marine Construction
37www.herbosch-kiere.com
> Steel guiding structures
> Steel gangways with mesh and handrail
> Underwater dumping of armour stone
> Maintenance work
Jetty TerneuzenValuepark Terneuzen awarded Herbosch-Kiere the
contract to build phase 2 of the sea jetty for Oiltanking
Terneuzen BV. The heart of the jetty consisted of two
concrete load platforms and a concrete access and
pipe bridge on a steel pile foundation. The anchor
facilities along the jetty were realised by means of
39 pieces of steel mooring and berthing dolphins.
The existing bridge to the bank was protected by two
new guiding structures. The total length of the jetty
being 350m.
The works included:
> Two jetty platforms on steel piles. The platform
consisting of a substructure of steel piles and
concrete cross beams and a final deck – designed
by the contractor – of prepressed beams with an
in-situ concrete cover
> Fender panels and bollards designed by the
contractor; partly connected to the jetty platform
by means of gangways
ProjectsMarine Construction
38 www.herbosch-kiere.com
Projects
South Hook LNG Terminal Besix Kier JV
Marine Construction
> Cutting of the redundant support piles one metre
below seabed
> Removal and transportation of the redundant
steel and concrete piles (+/- 700 piles)
Sixteen concrete mooring dolphins were removed
(totalling 25,000t). Some of the lifts executed by the
Rambiz weighed in at 1,300 tonnes. The concrete
was crushed on site for recycling.
Herbosch-Kiere were subcontracted by the client to
undertake the following works:
> Slicing of 1,700mm thick reinforced concrete decks
> Cutting of the berth piles and dolphin piles
above water
> Removal and transportation of the concrete
deck sections
> Removal and transportation of the concrete
dolphin slabs
Plant:Some of the Plant used on this project included:
> WAASLAND Pontoon Vessel
> SCHELDELAND Pontoon Vessel
> SEA DEVIL Pontoon Vessel
> ATLANTIS Multi Purpose Pontoon Vessel
> RAMBIz Heavy Lift Vessel
39www.herbosch-kiere.com
Grobbendonk BridgeDe Scheepvaart awarded Herbosch-Kiere the
contract to demolish and build a new bridge above
the Albert Canal in Grobbendonk, Belgium.
The works included:
> Demolition of the existing bridge
> Demolition of the existing road, bicycle path,
pedestrian area, public lights and drainage-canal
> Demolition of existing embankments and
construction of new embankments to the right
and left shore
> Excavation of the shore above and below water
to widen the canal to 86m
> Construction of a new steel bridge
> Construction of new bridge pillars & foundations
> Installation of the new bridge
> Construction of a new road, bicycle path and
pedestrian area, public lights and drainage-canal
ProjectsDemolition
40 www.herbosch-kiere.com
LinkspanAt the Delwaide Dock in Antwerp, Herbosch-Kiere executed a project for the extension of an existing quay wall, known as the Linkspan, over 60m long and 35m wide.
Works included:
> Demolition of the quay walls at the “Linkspan” using explosives, removal of waste and demolition of the existing quay crane.
> Execution of the connections with the existing structures.
The “Linkspan’, originally designed for RORO traffic, needed to be removed for logistical reasons. In its place a new quay was erected with the new wall consisting of a horizontal ferroconcrete plate attached from both sides to ferroconcrete slurry walls. The complete construction was secured with ground anchors, with the new quay wall being connected to the adjacent quays.
Projects Demolition
41www.herbosch-kiere.com
The bridge above the Albert Canal in Viersel (Belgium) needed to be replaced by a taller steel arch bridge. Demolition and rebuilding of the bridge was necessary to make it possible for ships with four layers of containers to navigate over the full length of the Canal. The new bridge, spanning 118m across, provided a headway of 9.10m. The canal was also broadened from 50 to 86m.
Works included:
> Demolition of the existing bridge
> Construction of the new bridge
> Reconstruction and raising of the road
> Broadening of the Albert Canal
> Construction of new quays
> Groundwork and dredging between the existing quays
> Broadening of the shore
Viersel Bridge
ProjectsDemolition
42 www.herbosch-kiere.com
OsirisHerbosch-Kiere chartered the ATLANTIS to the
joint venture of Osiris Marine Services and Nordic
Offshore Marine for cable repair. On-board the
DP1 cable repair vessel was Reef Subsea Dredging
& Excavation’s (formerly Rotech Subsea) T4000
burial/de-burial plant.
Luke Ansell, the Business Development Manager
at Osiris Marine Services, said: “The Atlantis has
a maximum draft of 2.4m and she can bottom out.
So that coupled with the versatility of our offshore
spread means we are in the position to offer Diving,
ROV, Cable repair and trenching solutions where
other vessels can’t.”
Projects Renewables
43www.herbosch-kiere.com
Offshore Windmill Farm SwedenKarehamn Offshore Windmill Farm is located in the
Baltic Sea, approximately 6km off shore. The farm
produces a total of 48MW with 16no Vestas V112
wind turbines, each with a height of 79.6m and an
individual capacity of 3MW.
Concrete foundations to the 16 wind turbines,
installed by E.ON along the Swedish shore, were
completed satisfactorily, but due to a rocky sea bed
the self-elevating ship MPI Discovery had difficulties
in positioning its spud legs for further construction
of the wind turbines. E.ON awarded Herbosch-Kiere
the contract to place the grit platforms on the sea
bed around the foundations enabling the spuds of
the elevating ship to stand securely on the sea bed.
The Albatros was mobilised to place 16x6no gravel
beds on the sea bed for use as footprints for the
Charterer’s hired MPI Discovery.
ProjectsRenewables
44 www.herbosch-kiere.com
Plant: ATLANTISSelf propelled Multi purpose marine vessel.
Dimensions:
> 81m(l) x 22m(b) x 3.8m(d), 1,998 tonnes
> 2 Spuds: 1.22m x 28m
Working deck dimensions:
> 22m x 57m with 10m2 load
> Four point mooring system, 4 x 500m
> Max pulling power 40 ton, Max holding power 75 ton
> Accommodation - 10 single berths
Herbosch-Kiere Marine Contractors Ltd was
awarded a Charter Contract on the London Array
Windfarm Project by the company Global Marine
(GMSL). Our contract was for the installation of 33kv
transmission cables between the turbines and the
substations, using our multi purpose pontoon barge
“Atlantis”. The 4 month project began for Herbosch-
Kiere in September 2011 when the Atlantis vessel
sailed to Sheerness.
The London Array Windfarm Project (50% Dong
Energy, 30% Eon and 20% Masdar) is a large offshore
windfarm in the UK, 20km off the Kent Coast.
For the cable installations works, we were required
to upgrade the “Atlantis” with a DP1 Certified
computer system and the deck was also adapted to
hold offshore accommodation containers for GMSL’s
37 staff.
London Array Offshore Wind Farm Global Marine (GMSL)
Projects Renewables
45www.herbosch-kiere.com
Whilst unloading on the quay of Niel, the Celandro
ship capsized when water entered the ballast tank
causing ¾ of its load to fall out. The ship was laden
with 450 pallets, each carrying 1,000kg of cement.
After removing the load from the water, the ship
was rotated 90° by the use of cables. All of the
openings were resealed and pumped dry to refloat
Wreck Salvage Celandrothe ship. Rapid execution was required before the
tide could reach the hold. When the ship was afloat
with the balance of the load still on board, the
Celandro was towed away with an intact cargo.
Built in 1960, the Celandro is over 60m long, with an
empty weight of 172 tons and a load capacity of
400 tons.
ProjectsMarine Salvage
46 www.herbosch-kiere.com
These works included the salvage of two wrecks
in the estuary of the Seine by Honfleur in France
using the Atlantis. The coaster The Hermon sank in
1896 along with a separate barge. For this contract
the Atlantis was used along with a 250T excavator,
equipped with a 15T shear cutter and American
11320 crane.
The works were divided in two phases:
> Partial removal of the steamship The Hermon
> Complete removal of the sunken barge (9x29m)
400 tons of steel was removed. Removal of both
wrecks was necessary to create a broader and
deeper fairway.
Salvage of the Hermon
Projects Marine Salvage
47www.herbosch-kiere.com
Dover Harbour Board awarded Herbosch-Kiere UK
the contract for the salvage and partial removal of
the blockship “Spanish Prince”, an ex-cargoship
which was scuttled by the Admiralty during the
First World War and lay to the east of the Western
Entrance in the Outer Harbour of the Port. She
was moved to her present position in the 1930’s,
the bow was close to the Southern Breakwater.
Herbosch-Kiere used our multi-purpose barge
Waasland and pontoon vessel Gaverland with
speciality lifting and cutting equipment for this
contract, the ship was cut up in situ before being
raised from the sea bed.
Plant: WAASLANDDims: L 60m, B 13.85m
Draught: 0.55m
Max Draught: 2.70m
Depth: 3m
Loading Capacity: 1,812 ton
Plant: GAVERLANDDims: L 60m, B 22m
Draught: 0.75m
Max Draught: 3.30m
Depth: 4m
Loading Capacity: 3,200 ton
Salvage of Spanish Prince Wreck Dover Harbour Board
Projects Marine Salvage
48 www.herbosch-kiere.com
Plant: ATLANTISSelf propelled Multi purpose marine vessel.
Dimensions:
> 81m(l) x 22m(b) x 3.8m(d), 1,998 tonnes
> 2 Spuds: 1.22m x 28m
Working deck dimensions:
> 22m x 57m with 10m2 load
> Four point mooring system, 4 x 500m
> Max pulling power 40 ton, Max holding power 75 ton
> Accommodation - 10 single berths
Fylde Outfall Coastal Protection Van Oord ACz Ltd
Projects Other
Charter hire of the side stone dumping vessel
“Atlantis” for the placement of 300,000 tonnes of
various sized rock onto a 5.2km existing outfall pipe.
49www.herbosch-kiere.com
In the past asbestos cement was used in a variety
of places to raise and harden roads and paths.
Asbestos cement being the residue product created
by crushing asbestos cement piles. Such grit is of
course no longer produced, but today the dangers of
inhaling asbestos fibers remain. Several residential
plots required decontamination, and asbestos
cement removed by controlled digging. In certain
basements asbestos was required to be covered
Contaminated Asbestos Removal
with layers of concrete. The residents and owners
of the plots were kept informed and updated by
intensive communication and personal visits from
the contractor and the designers.
> 700 plots
> +/- 75,000 tons of asbestos cement was removed
and disposed of
Projects Other
50 www.herbosch-kiere.com
Stone Dumping Qatar
Projects Other
For these works, the Atlantis was chartered by a
subsidiary company of DEME.
> Dumping of 2,500,000 T stones in the harbour of
Ras Laffan, Qatar
> Dumping of 300,000 T stones in Yanam, India
> Supply of tetrapods in Las Raffan
SAFELY DELIVERING VALUE ENGINEERED MARINE PROJECTS
For more information, visit us at:www.herbosch-kiere.com
Rev
. 03/
2014
Herbosch-Kiere n.v.
Haven 1558 - Sint Jansweg 7
9130 Kallo
Belgium
Tel: +32 (0)3 575 02 82
Fax: +32 (0)3 575 13 10
www.herbosch-kiere.com
SAFELY DELIVERING VALUE ENGINEERED MARINE PROJECTS