sae 3000 psi, 210 bar reference guide - tube-mac tmi 3000 se… · tube-mac.com g1 3d step models...

SAE 3000 PSI, 210 bar Reference Guide

Flare FlangeDimensions

Page G1

Flare Flange Clearance Holes

NPSFFC34

Page G2

Flare Flange Clearance Holes

Metric FFCM3Page G3

Flare Flange Threaded Holes

NPSFFT34

Page G4

Flare Flange Threaded Holes

MetricFFTM34Page G5

Flare FlangeReducing

Clearance Holes NPSFFCR34Page G6

Flare Flange SetO-Ring Face Cone

Clearance Holes NPSFFC34-COPage G8

Flare Flange Cone Inserts

NPSCO, CF, CDPage G17

Retain Ring FlangeDimensions

Page G25

Retain Ring Style Butt Weld AdapterAssembly, Metric

A/BWARPage G34

Flare Flange SetO-Ring Face Cone

Clearance Holes MetricFFCM34-CO

Page G9

Flare FlangeCone Inserts

with Pilot Port NPSCOP, CFPPage G18

Retain Ring FlangeClearance Holes

NPS, MetricRFAC34, RFC34

Page G26

BSPP Female Thread Adapter

AssemblyA/FBTA

Page G38

Flare Flange SetFlat Face Cone

Clearance Holes NPSFFC34-CFPage G11


MetricCO, CF, CDPage G19

Retain Ring Flange Threaded Holes

NPS, MetricRFAT34, RFT34, RFTM34

Page G27

SAE Male Thread Adapter

AssemblyA/STA

Page G39

Flare Flange SetFlat Face Cone

Clearance Holes MetricFFCM34-CFPage G12


with Pilot Port MetricCOP, CFPPage G21

Bump Style Butt Weld Adapter

Assembly, NPSA/BWA

Page G28

NPT Male Thread Adapter

AssemblyA/NTA

Page G40

Flare Flange SetDouble Cone

Clearance Holes NPSFFC34-CDPage G14

Flare FlangeO-Ring Face Cone

ReducerCOR

Page G23

Bump Style Butt Weld Adapter

Assembly, MetricA/BWA

Page G29

BSPP Male Thread Adapter

AssemblyA/BTA

Page G41

Flare FlangeReducing

Threaded Holes NPSFFTR34Page G7

Flare FlangeFlat Face Cone

ReducerCFR

Page G24

Retain Ring Style Butt Weld Adapter

Assembly, NPSA/BWAR

Page G33

Flare Flange SetDouble Cone

Clearance Holes MetricFFCM34-CDPage G15

SAE Female Thread Flange O-Ring Face,

Threaded HolesSTFO34

Page G42

Retain Ring Flange Bend Elbow Assembly

A/RFEPage G54

Reducing Branch Block Tee

NPS, MetricBTR34, BTRM34

Page G60

ISO Transition PlateManifold Mount

NPS, MetricTPO7-34, TPOM7-34

Page G67

ISO Transition Plate Reducer Manifold Mount NPS, Metric

TPRO7-34, TPROM7-34Page G73

SAE Female Thread Flange Flat Face, Threaded Holes

STFF34Page G43

Retain Ring Flange Elbow

AssemblyA/RRFE

Page G55

Reducing Branch Block Tee

NPS, MetricBTR7-34, BTRM7-34

Page G62

Transition PlateReducer

NPS, MetricTPR6-34, TPRM6-34

Page G68

Transition Plate Reducer Manifold

Mount NPSTPRO34

Page G74

NPT Female Thread Flange O-Ring Face,

Clearance HolesNTFO34

Page G44

Block Elbow

NPS, MetricBE34, BEM341

Page G56

Split FlangeBranch TeeNPS, Metric

A/SFBT34, A/SFBTM34Page G63

Transition Plate ISO Reducer NPS, Metric

TPR7-34, TPRM7-34Page G69

Transition PlateReducer Manifold

Mount MetricTPROM34Page G75

NPT Female Thread Flange Flat Face, Threaded Holes

NTFF34Page G45

Split Flange ElbowBlock

NPS, MetricA/SFE34, A/SFEM34

Page G57

Split FlangeRun Tee

NPS, MetricA/SFRT34, A/SFRTM34

Page G64

Transition PlateReducer

NPSTPR34

Page G70

Adapter Plate

NPS, MetricAP34, APM34

Page G76

Flare FlangePipe Assembly

NPS, MetricPAF

Page G46, G47

Flare FlangeBent Pipe Assembly

NPS, MetricBPAF

Page G48-G51

Flange TeeAssembly

NPS, Metric A/RRFT

Page G58

Split FlangeTee

NPS, MetricA/SFT34, A/SFTM34

Page G65

Transition PlateReducerMetric

TPRM34Page G71

O-Ring Connector Plate

OCPPage G77

Flare Flange Bend Elbow Assembly

NPS, MetricA/FFE

Page G52,G53

Transition PlateManifold Mount

NPS, MetricTPO6-34, TPOM6-34

Page G66

Transition Plate Reducer Manifold Mount NPS, Metric

TPRO6-34, TPROM6-34Page G72

Block Tee

NPS, MetricBT34, BTM34

Page G59


Connector Plate

CPPage G78

Blanking FlangeO-Ring Face with Clearance HolesBFO34, BFOM34

Page G85

Retain Ring

R, RAPage G79

Blanking FlangeFlat Face with

Threaded HolesBFF34, BFFM34

Page G86

O-Ring SpacerRR Pipe Flange

ConnectionOS

Page G80

Split Flange KitIncludes Bolts

NPS, MetricSFK34, SFKM34

Page G87

O-Ring SpacerRR Pipe

to Hose EndOSH

Page G81

Split Flange Plug

NPS, MetricSFP34, SFPM34

Page G88

O-Ring Spacer With Pilot Port

NPS, MetricOSP, OSPMPage G82

Retain RingFlange Bulkhead

AssemblyA/RFBH

Page G83

Non-ConductiveConnector Plate

NPS, Metric NCCP34

Page G89

Retain Ring FlangeConcentric Reducer

AssemblyA/CR

Page G84


TUBE-MAC.comG1

3D step models available upon request

Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Flare Flange DimensionsSAE J518 Code 61 (ISO 6162-1)

FFCM34 Metric Flare Flange, Clearance

* SHCS Bolt SpecificationCarbon Steel: ASTM A574316 Stainless Steel: ASTM A193 B8M Class 2

SizeDimensions (in) SHCS Bolt (in)*

L (L)

WorkingPressure PSI (Bar)A B G H M N P E

1/2" 0.69 1.50 1.81 2.22 2.05 1.93 2.32 0.81 5/16"-18 UNC x 2.25 (1.50) 5000 (350)

3/4" 0.88 1.88 2.06 2.56 2.40 2.17 2.68 0.82 3/8"-16 UNC x 2.50 (1.50) 5000 (350)

1" 1.03 2.06 2.31 2.76 2.64 2.44 2.87 0.87 3/8"-16 UNC x 2.50 (1.50) 5000 (350)

1-1/4" 1.19 2.31 2.88 3.11 3.11 2.99 3.23 0.91 7/16"-14 UNC x 2.50 (1.75) 4000 (280)

1-1/2" 1.41 2.75 3.25 3.66 3.58 3.35 3.78 1.06 1/2"-13 UNC x 3.00 (2.00) 4000 (280)

2" 1.69 3.06 3.81 4.02 4.02 3.94 4.13 1.22 1/2"-13 UNC x 3.50 (2.00) 4000 (280)

2-1/2" 2.00 3.50 4.28 4.49 4.49 4.37 4.61 1.40 1/2"-13 UNC x 4.00 (2.50) 3000 (210)

3" 2.44 4.19 5.16 5.28 5.35 5.24 5.39 1.67 5/8"-11 UNC x4.50 (2.75) 3000 (210)

Flare Flange Dimensions, NPS

SAE 3000 PSI Flare Flange Dimensions SAE J518 Code 61 (ISO 6162-‐1)

NPS Flange Dimensions (Inches) * SHCS Bolt Specification Carbon Steel: ASTM A574 316 Stainless Steel: ASTM A193 B8M Class 2

Metric Flange Dimensions (Millimeters)

Dimensions (mm) Size

A B G H M N P E SHCS Bolt (mm)*

L (L)

Working Pressure PSI (bar)

1/2" 17.5 38.1 46.0 54.9 52.1 49.0 58.9 20.6 M8 x 60 (40) 5000 (350) 3/4" 22.4 47.8 52.3 65.0 61.0 55.1 68.1 20.8 M10 x 65 (40) 5000 (350)

1" 26.2 52.3 58.7 70.1 67.1 62.0 72.9 22.1 M10 x 65(40) 5000 (350)

1 1/4" 30.2 58.7 73.2 79.0 79.0 75.9 82.0 23.1 M10 x 65 (45) 4000 (280)

1 1/2" 35.8 69.9 82.6 93.0 90.9 85.1 96.0 26.9 M12 x 75 (50) 4000 (280) 2" 42.9 77.7 96.8 102.1 102.1 100.1 104.9 31.0 M12 x 90 (50) 4000 (280)

2 1/2" 50.8 88.9 108.7 114.0 114.0 111.0 117.1 35.6 M12 x 100 (65) 3000 (210)

3" 62.0 106.4 131.1 134.1 135.9 133.1 136.9 42.4 M16 x 120 (70) 3000 (210) * SHCS Bolt Specification Carbon Steel: DIN912 / ISO4762 Grade 8.8 316 Stainless Steel: DIN912 / ISO4762 A480

Dimensions (in) Size

A B G H M N P E SHCS Bolt (in)*

L (L)


1/2" 0.69 1.50 1.81 2.16 2.05 1.93 2.32 0.81 5/16"-‐18 UNC x 2.25 (1.50) 5000 (350)

3/4" 0.88 1.88 2.06 2.56 2.40 2.17 2.68 0.82 3/8"-‐16 UNC x 2.50 (1.50) 5000 (350)

1" 1.03 2.06 2.31 2.76 2.64 2.44 2.87 0.87 3/8"-‐16 UNC x 2.50 (1.50) 5000 (350) 1 1/4" 1.19 2.31 2.88 3.11 3.11 2.99 3.23 0.91 7/16"-‐14 UNC x 2.50 (1.75) 4000 (280)

1 1/2" 1.41 2.75 3.25 3.66 3.58 3.35 3.78 1.06 1/2"-‐13 UNC x 3.00 (2.00) 4000 (280)

2" 1.69 3.06 3.81 4.02 4.02 3.94 4.13 1.22 1/2"-‐13 UNC x 3.50 (2.00) 4000 (280)

2 1/2" 2.00 3.50 4.28 4.49 4.49 4.37 4.61 1.40 1/2"-‐13 UNC x 4.00 (2.50) 3000 (210) 3" 2.44 4.19 5.16 5.28 5.35 5.24 5.39 1.67 5/8"-‐11 UNC x4.50 (2.75) 3000 (210)

DRAFT

Flare Flange Dimensions, Metric

SizeDimensions (mm) SHCS Bolt (mm)*

L (L)


1/2" 17.5 38.1 46.0 56.9 52.1 49.0 58.9 20.6 M8 x 60 (40) 5000 (350)

3/4" 22.4 47.8 52.3 65.0 61.0 55.1 68.1 20.8 M10 x 65 (40) 5000 (350)

1" 26.2 52.3 58.7 70.1 67.1 62.0 72.9 22.1 M10 x 65(40) 5000 (350)

1-1/4" 30.2 58.7 73.2 79.0 79.0 75.9 82.0 23.1 M10 x 65 (45) 4000 (280)

1-1/2" 35.8 69.9 82.6 93.0 90.9 85.1 96.0 26.9 M12 x 75 (50) 4000 (280)

2" 42.9 77.7 96.8 102.1 102.1 100.1 104.9 31.0 M12 x 90 (50) 4000 (280)

2-1/2" 50.8 88.9 108.7 114.0 114.0 111.0 117.1 35.6 M12 x 100 (65) 3000 (210)

3" 62.0 106.4 131.1 134.1 135.9 133.1 136.9 42.4 M16 x 120 (70) 3000 (210)

* SHCS Bolt SpecificationCarbon Steel: DIN912 / ISO4762 Grade 8.8316 Stainless Steel: DIN912 / ISO4762 A480

G2TUBE-MAC.com

G23D step models available upon request

SAE 3000 PSI Flare Flange with Clearance Holes, NPSSAE J518 Code 61 (ISO 6162-1)

Size Pipe O.D.(in)

StandardPart Number

WorkingPressurePSI (Bar)

Weightlbs (kg)

1/2" 0.840 FFC34-050-* 5000 (350) 0.44 (0.20)

3/4" 1.050 FFC34-075-* 5000 (350) 0.63 (0.29)

1" 1.315 FFC34-100-* 5000 (350) 0.72 (0.33)

1-1/4" 1.660 FFC34-125-* 4000 (280) 1.05 (0.48)

1-1/2" 1.900 FFC34-150-* 4000 (280) 1.59 (0.72)

2" 2.375 FFC34-200-* 4000 (280) 2.31 (1.05)

2-1/2" 2.875 FFC34-250-* 3000 (210) 3.02 (1.37)

3" 3.500 FFC34-300-* 3000 (210) 4.96 (2.25)

SAE 3000 PSI Flare Flange with Clearance Holes, NPS SAE J518 Code 61 (ISO 6162-‐1)

FFC34 NPS Flare Flange, Clearance

Size Pipe O.D. (in) Standard Part No.


WT lbs (kg)

1/2" 0.840 FFC34-‐050-‐* 5000 (350) 0.44 (0.20) 3/4" 1.050 FFC34-‐075-‐* 5000 (350) 0.63 (0.29) 1" 1.315 FFC34-‐100-‐* 5000 (350) 0.72 (0.33)

1 1/4" 1.660 FFC34-‐125-‐* 4000 (280) 1.05 (0.48) 1 1/2" 1.900 FFC34-‐150-‐* 4000 (280) 1.59 (0.72) 2" 2.375 FFC34-‐200-‐* 4000 (280) 2.31 (1.05)

2 1/2" 2.875 FFC34-‐250-‐* 3000 (210) 3.02 (1.37) 3" 3.500 FFC34-‐300-‐* 3000 (210) 4.96 (2.25)

* Materials: • Standard, No Designation = Carbon Steel, Clear Zinc Plated (Cr6 Free). • HDG = Carbon Steel, Hot Dip Galvanized. • SS = Stainless Steel, Type 316.

CLEARANCE HOLE

Ordering Example: FFC34-‐200-‐SS

* Insert Material

DRAFT

FFC34 - Flare Flange with Clearance Holes, NPS

* Materials:Standard, No Designation = Carbon Steel, Clear Zinc Plated (Cr6 Free).HDG = Carbon Steel, Hot Dip Galvanized.SS = Stainless Steel, Type 316.

Ordering Example: FFC34-200-SS

* Insert Material

TUBE-MAC.comG3


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

SAE 3000 PSI Flare Flange with Clearance Holes, Metric SAE J518 Code 61 (ISO 6162-‐1)


Size Pipe O.D. (mm)

Standard Part No. Working Pressure PSI (bar)

WT lbs (kg)

1/2" 16 FFCM34-‐050-‐16MM-‐* 5000 (350) 0.50 (0.23) 1/2" 18 FFCM34-‐050-‐18MM-‐* 5000 (350) 0.48 (0.22) 1/2" 20 FFCM34-‐050-‐20MM-‐* 5000 (350) 0.45 (0.20) 1/2" 25 FFCM34-‐050-‐25MM-‐* 5000 (350) 0.43 (0.20) 3/4" 20 FFCM34-‐075-‐20MM-‐* 5000 (350) 0.66 (0.30) 3/4" 25 FFCM34-‐075-‐25MM-‐* 5000 (350) 0.64 (0.29) 3/4" 30 FFCM34-‐075-‐30MM-‐* 5000 (350) 0.59 (0.27) 1" 25 FFCM34-‐100-‐25MM-‐* 5000 (350) 0.81 (0.37) 1" 30 FFCM34-‐100-‐30MM-‐* 5000 (350) 0.74 (0.34) 1" 38 FFCM34-‐100-‐38MM-‐* 5000 (350) 0.67 (0.30)

1 1/4" 30 FFCM34-‐125-‐30MM-‐* 4000 (280) 1.23 (0.56) 1 1/4" 38 FFCM34-‐125-‐38MM-‐* 4000 (280) 1.13 (0.51) 1 1/4" 42 FFCM34-‐125-‐42MM* 4000 (280) 1.07 (0.49) 1 1/2" 30 FFCM34-‐150-‐30MM-‐* 4000 (280) 2.06 (0.93) 1 1/2" 38 FFCM34-‐150-‐38MM-‐* 4000 (280) 1.90 (0.86) 1 1/2" 42 FFCM34-‐150-‐42MM-‐* 4000 (280) 1.94 (0.88) 1 1/2" 50 FFCM34-‐150-‐50MM-‐* 4000 (280) 1.55 (0.70) 2" 50 FFCM34-‐200-‐50MM-‐* 4000 (280) 2.61 (1.18) 2" 60 FFCM34-‐200-‐60MM* 4000 (280) 2.32 (1.05)

2 1/2" 60 FFCM34-‐250-‐60MM-‐* 3000 (210) 3.59 (1.63) 2 1/2" 73 FFCM34-‐250-‐73MM-‐* 3000 (210) 3.03 (1.37) 2 1/2" 75 FFCM34-‐250-‐75MM-‐* 3000 (210) 2.97 (1.35) 3" 75 FFCM34-‐300-‐75MM-‐* 3000 (210) 5.95 (2.70) 3" 90 FFCM34-‐300-‐90MM-‐* 3000 (210) 4.91 (2.23)


CLEARANCE HOLE

Ordering Example: FFCM34-‐200-‐50MM-‐SS

* Insert Material

DRAFT

Size Pipe O.D. (mm) Standard Part Number Working Pressure

PSI (Bar)Weightlbs (kg)

1/2" 16 FFCM34-050-16MM-* 5000 (350) 0.50 (0.23)

1/2" 18 FFCM34-050-18MM-* 5000 (350) 0.48 (0.22)

1/2" 20 FFCM34-050-20MM-* 5000 (350) 0.45 (0.20)

1/2" 25 FFCM34-050-25MM-* 5000 (350) 0.43 (0.20)

3/4" 20 FFCM34-075-20MM-* 5000 (350) 0.66 (0.30)

3/4" 25 FFCM34-075-25MM-* 5000 (350) 0.64 (0.29)

3/4" 30 FFCM34-075-30MM-* 5000 (350) 0.59 (0.27)

1" 25 FFCM34-100-25MM-* 5000 (350) 0.81 (0.37)

1" 30 FFCM34-100-30MM-* 5000 (350) 0.74 (0.34)

1" 38 FFCM34-100-38MM-* 5000 (350) 0.67 (0.30)

1-1/4" 30 FFCM34-125-30MM-* 4000 (280) 1.23 (0.56)

1-1/4" 38 FFCM34-125-38MM-* 4000 (280) 1.13 (0.51)

1-1/4" 42 FFC34-125-* 4000 (280) 1.07 (0.49)

1-1/2" 30 FFCM34-150-30MM-* 4000 (280) 2.06 (0.93)

1-1/2" 38 FFCM34-150-38MM-* 4000 (280) 1.90 (0.86)

1-1/2" 42 FFCR34-150x125-* 4000 (280) 1.94 (0.88)

1-1/2" 50 FFCM34-150-50MM-* 4000 (280) 1.55 (0.70)

2" 50 FFCM34-200-50MM-* 4000 (280) 2.61 (1.18)

2" 60 FFC34-200-* 4000 (280) 2.32 (1.05)

2-1/2" 60 FFCR34-250-200-* 3000 (210) 3.59 (1.63)

2-1/2" 73 FFCM34-250-73MM-* 3000 (210) 3.03 (1.37)

2-1/2" 75 FFCM34-250-75MM-* 3000 (210) 2.97 (1.35)

3" 75 FFCM34-300-75MM-* 3000 (210) 5.95 (2.70)

3" 90 FFCM34-300-90MM-* 3000 (210) 4.91 (2.23)

FFCM34 – Flare Flange with Clearance Holes, Metric

SAE 3000 PSI Flare Flange with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)


Ordering Example: FFCM34-200-50MM-SS

* Insert Material

G4TUBE-MAC.com


SAE 3000 PSI Flare Flange with Threaded Holes, NPSSAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Flare Flange with Threaded Holes, NPS SAE J518 Code 61 (ISO 6162-‐1)

FFT34 NPS Flare Flange, Threaded

Size Pipe O.D. (in) Standard Part No.


WT lbs (kg)

1/2" 0.840 FFT34-‐050-‐* 5000 (350) 0.49 (0.22) 3/4" 1.050 FFT34-‐075-‐* 5000 (350) 0.70 (0.32) 1" 1.315 FFT34-‐100-‐* 5000 (350) 0.79 (0.36)

1 1/4" 1.660 FFT34-‐125-‐* 4000 (280) 1.12 (0.51) 1 1/2" 1.900 FFT34-‐150-‐* 4000 (280) 1.70 (0.77) 2" 2.375 FFT34-‐200-‐* 4000 (280) 2.42 (1.10)

2 1/2" 2.875 FFT34-‐250-‐* 3000 (210) 3.16 (1.43) 3" 3.500 FFT34-‐300-‐* 3000 (210) 5.21 (2.36)


THREADED HOLE

Ordering Example: FFT34-‐200-‐SS

* Insert Material

DRAFT

FFT34 - Flare Flange with Threaded Holes, NPS

Size Pipe O.D. (in) Standard Part Number Working Pressure

PSI (bar)Weightlbs (kg)

1/2" 0.840 FFT34-050-* 5000 (350) 0.49 (0.22)

3/4" 1.050 FFT34-075-* 5000 (350) 0.70 (0.32)

1" 1.315 FFT34-100-* 5000 (350) 0.79 (0.36)

1-1/4" 1.660 FFT34-125-* 4000 (280) 1.12 (0.51)

1-1/2" 1.900 FFT34-150-* 4000 (280) 1.70 (0.77)

2" 2.375 FFT34-200-* 4000 (280) 2.42 (1.10)

2-1/2" 2.875 FFT34-250-* 3000 (210) 3.16 (1.43)

3" 3.500 FFT34-300-* 3000 (210) 5.21 (2.36)


Ordering Example: FFT34-200-SS

* Insert Material

TUBE-MAC.comG5


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

Size Pipe O.D. (mm) Standard Part Number Working Pressure


1/2" 16 FFTM34-050-16MM-* 5000 (350) 0.54 (0.24)

1/2" 18 FFTM34-050-18MM-* 5000 (350) 0.52 (0.24)

1/2" 20 FFTM34-050-20MM-* 5000 (350) 0.49 (0.22)

1/2" 25 FFTM34-050-25MM-* 5000 (350) 0.47 (0.21)

3/4" 20 FFTM34-075-20MM-* 5000 (350) 0.72 (0.33)

3/4" 25 FFTM34-075-25MM-* 5000 (350) 0.70 (0.32)

3/4" 30 FFTM34-075-30MM-* 5000 (350) 0.64 (0.29)

1" 25 FFTM34-100-25MM-* 5000 (350) 0.87 (0.39)

1" 30 FFTM34-100-30MM-* 5000 (350) 0.81 (0.37)

1" 38 FFTM34-100-38MM-* 5000 (350) 0.73 (0.33)

1-1/4" 30 FFTM34-125-30MM-* 4000 (280) 1.29 (0.59)

1-1/4" 38 FFTM34-125-38MM-* 4000 (280) 1.20 (0.54)

1-1/4" 42 FFTM34-125-42MM-* 4000 (280) 1.15 (0.52)

1-1/2" 30 FFTM34-150-30MM-* 4000 (280) 2.18 (0.99)

1-1/2" 38 FFTM34-150-38MM-* 4000 (280) 2.01 (0.91)

1-1/2" 42 FFTM34-150-42MM-* 4000 (280) 1.82 (0.83)

1-1/2" 50 FFTM34-150-50MM-* 4000 (280) 1.67 (0.76)

2" 50 FFTM34-200-50MM-* 4000 (280) 2.68 (1.22)

2" 60 FFTM34-200-60MM-* 4000 (280) 2.45 (1.11)

2-1/2" 60 FFTM34-250-60MM-* 3000 (210) 3.75 (1.70)

2-1/2" 73 FFTM34-250-73MM-* 3000 (210) 3.18 (1.44)

2-1/2" 75 FFTM34-250-75MM-* 3000 (210) 3.18 (1.44)

3" 75 FFTM34-300-75MM-* 3000 (210) 6.17 (2.80)

3" 90 FFTM34-300-90MM-* 3000 (210) 5.13 (2.33)

FFTM34 - Flare Flange with Threaded Holes, Metric


Ordering Example: FFTM34-200-50MM-SS

* Insert Material

SAE 3000 PSI Flare Flange with Threaded Holes, Metric SAE J518 Code 61 (ISO 6162-‐1)

FFTM34 Metric Flare Flange, Threaded

Size Pipe O.D. (mm)

Standard Part No. Working Pressure PSI (bar)

WT lbs (kg)

1/2" 16 FFTM34-‐050-‐16MM-‐* 5000 (350) 0.54 (0.24) 1/2" 18 FFTM34-‐050-‐18MM-‐* 5000 (350) 0.52 (0.24) 1/2" 20 FFTM34-‐050-‐20MM-‐* 5000 (350) 0.49 (0.22) 1/2" 25 FFTM34-‐050-‐25MM-‐* 5000 (350) 0.47 (0.21) 3/4" 20 FFTM34-‐075-‐20MM-‐* 5000 (350) 0.72 (0.33) 3/4" 25 FFTM34-‐075-‐25MM-‐* 5000 (350) 0.70 (0.32) 3/4" 30 FFTM34-‐075-‐30MM-‐* 5000 (350) 0.64 (0.29) 1" 25 FFTM34-‐100-‐25MM-‐* 5000 (350) 0.87 (0.39) 1" 30 FFTM34-‐100-‐30MM-‐* 5000 (350) 0.81 (0.37) 1" 38 FFTM34-‐100-‐38MM-‐* 5000 (350) 0.73 (0.33)

1 1/4" 30 FFTM34-‐125-‐30MM-‐* 4000 (280) 1.29 (0.59) 1 1/4" 38 FFTM34-‐125-‐38MM-‐* 4000 (280) 1.20 (0.54) 1 1/4" 42 FFTM34-‐125-‐42MM-‐* 4000 (280) 1.15 (0.52) 1 1/2" 30 FFTM34-‐150-‐30MM-‐* 4000 (280) 2.18 (0.99) 1 1/2" 38 FFTM34-‐150-‐38MM-‐* 4000 (280) 2.01 (0.91) 1 1/2" 42 FFTM34-‐150-‐42MM-‐* 4000 (280) 1.82 (0.83) 1 1/2" 50 FFTM34-‐150-‐50MM-‐* 4000 (280) 1.67 (0.76) 2" 50 FFTM34-‐200-‐50MM-‐* 4000 (280) 2.68 (1.22) 2" 60 FFTM34-‐200-‐60MM-‐* 4000 (280) 2.45 (1.11)

2 1/2" 60 FFTM34-‐250-‐60MM-‐* 3000 (210) 3.75 (1.70) 2 1/2" 73 FFTM34-‐250-‐73MM-‐* 3000 (210) 3.18 (1.44) 2 1/2" 75 FFTM34-‐250-‐75MM-‐* 3000 (210) 3.18 (1.44) 3" 75 FFTM34-‐300-‐75MM-‐* 3000 (210) 6.17 (2.80) 3" 90 FFTM34-‐300-‐90MM-‐* 3000 (210) 5.13 (2.33)


THREADED HOLE

Ordering Example: FFTM34-‐200-‐50MM-‐SS

* Insert Material

DRAFT SAE 3000 PSI Flare Flange with Threaded Holes, MetricSAE J518 Code 61 (ISO 6162-1)

G6TUBE-MAC.com


Size(flange x pipe) Standard Part Number Working Pressure PSI

(Bar)Weightlbs (kg)

3/4" x 1/2" FFCR34-075 x 050 5000 (350) 0.63 (0.28)

1” x 3/4" FFCR34-100 x 075 5000 (350) 0.73 (0.33)

1-1/4” x 1” FFCR34-125 x 100 5000 (350) 1.10 (0.50)

1-1/2” x 1-1/4” FFCR34-150 x 125 4000 (280) 1.53 (0.69)

2” x 1-1/2” FFCR34-200 x 150 4000 (280) 2.22 (1.01)

2-1/2” x 2” FFCR34-250 x 200 4000 (280) 3.60 (1.60)

3” x 2-1/2” FFCR34-300 x 250 3000 (210) 5.90 (2.68)

FFCR34 - Flare Flange - Reducing with Clearance Holes, NPS


Ordering Example: FFCR34-075 x 050-SS

* Insert Material

SAE 3000 PSI Flare Flange -‐ Reducing with Clearance Holes SAE J518 Code 61 (ISO 6162-‐1)

FFCR34 Reducing Flare Flange

Size Standard Part No. Working Pressure PSI (Bar)

Weight Lbs (Kg)

3/4" x 1/2" FFCR34-‐075 x 050 5000 (350) 0.63 (0.28) 1” x 3/4" FFCR34-‐100 x 075 5000 (350) 0.73 (0.33)

1-‐1/4” x 1” FFCR34-‐125 x 100 5000 (350) 1.10 (0.50) 1-‐1/2” x 1-‐1/4” FFCR34-‐150 x 125 4000 (280) 1.53 (0.69)

2” x 1-‐1/2” FFCR34-‐200 x 150 4000 (280) 2.22 (1.01) 2-‐1/2” x 2” FFCR34-‐250 x 200 4000 (280) 3.60 (1.60) 3” x 2-‐1/2” FFCR34-‐300 x 250 3000 (210) 5.90 (2.68)


Ordering Example: FFCR34-‐075 x 050-‐SS

* Insert Material

CLEARANCE HOLE

SAE 3000 PSI Flare Flange - Reducingwith Clearance Holes, NPSSAE J518 Code 61 (ISO 6162-1)

Note:Reducing Flanges for NPS Pipe Only

TUBE-MAC.comG7


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Flare Flange - Reducingwith Threaded Holes, NPSSAE J518 Code 61 (ISO 6162-1)

Size(flange x pipe) Standard Part Number Working Pressure


3/4" x 1/2" FFTR34-075 x 050 5000 (350) 0.63 (0.28)

1” x 3/4" FFTR34-100 x 075 5000 (350) 0.73 (0.33)

1-1/4” x 1” FFTR34-125 x 100 5000 (350) 1.10 (0.50)

1-1/2” x 1-1/4” FFTR34-150 x 125 4000 (280) 1.53 (0.69)

2” x 1-1/2” FFTR34-200 x 150 4000 (280) 2.22 (1.01)

2-1/2” x 2” FFTR34-250 x 200 4000 (280) 3.60 (1.60)

3” x 2-1/2” FFTR34-300 x 250 3000 (210) 5.90 (2.68)

FFTR34 - Flare Flange - Reducing with Threaded Holes, NPS


Ordering Example: FFTR34-075 x 050-SS

* Insert Material

SAE 3000 PSI Flare Flange -‐ Reducing with Threaded Holes SAE J518 Code 61 (ISO 6162-‐1)

FFTR34 Reducing Flare Flange

Size Standard Part No. Working Pressure PSI (Bar)

Weight Lbs (Kg)

3/4" x 1/2" FFTR34-‐075 x 050 5000 (350) 0.63 (0.28) 1” x 3/4" FFTR34-‐100 x 075 5000 (350) 0.73 (0.33)

1-‐1/4” x 1” FFTR34-‐125 x 100 5000 (350) 1.10 (0.50) 1-‐1/2” x 1-‐1/4” FFTR34-‐150 x 125 4000 (280) 1.53 (0.69)

2” x 1-‐1/2” FFTR34-‐200 x 150 4000 (280) 2.22 (1.01) 2-‐1/2” x 2” FFTR34-‐250 x 200 4000 (280) 3.60 (1.60) 3” x 2-‐1/2” FFTR34-‐300 x 250 3000 (210) 5.90 (2.68)


Ordering Example: FFTR34-‐075 x 050-‐SS

* Insert Material

THREADED HOLE

Note:Reducing Flanges for NPS Pipe Only

G8TUBE-MAC.com


SAE 3000 PSI Flare Flange Set O-Ring Face with Clearance Holes, NPSSAE J518 Code 61 (ISO 6162-1)

Size Pipe Size Complete Flange SetPart Number

WT/Setlbs (kg)

Flange Part Number

O-Ring Face ConeInsert

Part Number

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number1/2" 1/2” SCH40 FFC34-CO-SCH40-050-*-^ 0.60 (0.27) FFC34-050-* CO-SCH40-050-*-^ ORV-1915 OR^-2-210

1/2" 1/2” SCH80 FFC34-CO-SCH80-050-*-^ 0.59 (0.27) FFC34-050-* CO-SCH80-050-*-^ ORV-1715 OR^-2-210



1” 1” SCH40 FFC34-CO-SCH40-100-*-^ 0.94 (0.43) FFC34-100-* CO-SCH40-100-*-^ ORV-3015 OR^-2-219

1” 1” SCH80 FFC34-CO-SCH80-100-*-^ 0.94 (0.43) FFC34-100-* CO-SCH80-100-*-^ ORV-2815 OR^-2-219

1-1/4" 1-1/4” SCH40 FFC34-CO-SCH40-125-*-^ 1.26 (0.57) FFC34-125-* CO-SCH40-125-*-^ ORV-3815 OR^-2-222

1-1/4" 1-1/4” SCH80 FFC34-CO-SCH80-125-*-^ 1.26 (0.57) FFC34-125-* CO-SCH80-125-*-^ ORV-3815 OR^-2-222

1-1/2" 1-1/2" SCH40 FFC34-CO-SCH40-150-*-^ 1.93 (0.88) FFC34-150-* CO-SCH40-150-*-^ ORV-4315 OR^-2-225



2" 2” SCH40 FFC34-CO-SCH40-200-*-^ 2.67 (1.21) FFC34-200-* CO-SCH40-200-*-^ ORV-5615 OR^-2-228



2-1/2" 2-1/2" SCH40 FFC34-CO-SCH40-250-*-^ 4.01 (1.82) FFC34-250-* CO-SCH40-250-*-^ ORV-2-036 OR^-2-232

2-1/2" 2-1/2" SCH80 FFC34-CO-SCH80-250-*-^ 4.05 (1.84) FFC34-250-* CO-SCH80-250-*-^ ORV-2-036 OR^-2-232


3" 3" SCH40 FFC34-CO-SCH40-300-*-^ 6.33 (2.87) FFC34-300-* CO-SCH40-300-*-^ ORV-2-041 OR^-2-237

3" 3" SCH80 FFC34-CO-SCH80-300-*-^ 6.40 (2.90) FFC34-300-* CO-SCH80-300-*-^ ORV-2-041 OR^-2-237

FFC34 - CO Flare Flange Set - O-Ring Face with Clearance Holes, NPS

* Materials:Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.ZSS = Carbon Steel Flange with Stainless Steel Cone, Type 316.HDGSS = Carbon Steel, Hot Dip Galvanized Flange with Stainless Steel Cone, Type 316.

^ O-Ring 2 Type:Standard, No Designation = Buna Nitrile.V = Viton.

SAE 3000 PSI Flare Flange Set O-‐Ring Face with Clearance Holes, NPS SAE J518 Code 61 (ISO 6162-‐1)

FFC34-‐CO NPS Flange O-‐Ring Face Set with Clearance Holes

Size Pipe Size Complete Flange Set Part No.

WT/Set lbs (kg)

Flange Part No.

O-‐Ring Face Cone Insert Part No.

O-‐Ring 1 (VITON) Part No.

O-‐Ring 2 (Buna) Part No.

1/2" 1/2” SCH40 FFC34-‐CO-‐SCH40-‐050-‐*-‐^ 0.60 (0.27) FFC34-‐050-‐* CO-‐SCH40-‐050-‐*-‐^ ORV-‐1915 OR^-‐2-‐210




1” 1” SCH40 FFC34-‐CO-‐SCH40-‐100-‐*-‐^ 0.94 (0.43) FFC34-‐100-‐* CO-‐SCH40-‐100-‐*-‐^ ORV-‐3015 OR^-‐2-‐219

1” 1” SCH80 FFC34-‐CO-‐SCH80-‐100-‐*-‐^ 0.94 (0.43) FFC34-‐100-‐* CO-‐SCH80-‐100-‐*-‐^ ORV-‐2815 OR^-‐2-‐219

1 1/4" 1 1/4” SCH40 FFC34-‐CO-‐SCH40-‐125-‐*-‐^ 1.26 (0.57) FFC34-‐125-‐* CO-‐SCH40-‐125-‐*-‐^ ORV-‐3815 OR^-‐2-‐222

1 1/4" 1 1/4” SCH80 FFC34-‐CO-‐SCH80-‐125-‐*-‐^ 1.26 (0.57) FFC34-‐125-‐* CO-‐SCH80-‐125-‐*-‐^ ORV-‐3815 OR^-‐2-‐222

1 1/2" 1 1/2" SCH40 FFC34-‐CO-‐SCH40-‐150-‐*-‐^ 1.93 (0.88) FFC34-‐150-‐* CO-‐SCH40-‐150-‐*-‐^ ORV-‐4315 OR^-‐2-‐225



2" 2” SCH40 FFC34-‐CO-‐SCH40-‐200-‐*-‐^ 2.67 (1.21) FFC34-‐200-‐* CO-‐SCH40-‐200-‐*-‐^ ORV-‐5615 OR^-‐2-‐228



2 1/2" 2 1/2" SCH40 FFC34-‐CO-‐SCH40-‐250-‐*-‐^ 4.01 (1.82) FFC34-‐250-‐* CO-‐SCH40-‐250-‐*-‐^ ORV-‐2-‐036 OR^-‐2-‐232

2 1/2" 2 1/2" SCH80 FFC34-‐CO-‐SCH80-‐250-‐*-‐^ 4.05 (1.84) FFC34-‐250-‐* CO-‐SCH80-‐250-‐*-‐^ ORV-‐2-‐036 OR^-‐2-‐232


3" 3" SCH40 FFC34-‐CO-‐SCH40-‐300-‐*-‐^ 6.33 (2.87) FFC34-‐300-‐* CO-‐SCH40-‐300-‐*-‐^ ORV-‐2-‐041 OR^-‐2-‐237

3" 3" SCH80 FFC34-‐CO-‐SCH80-‐300-‐*-‐^ 6.40 (2.90) FFC34-‐300-‐* CO-‐SCH80-‐300-‐*-‐^ ORV-‐2-‐041 OR^-‐2-‐237

* Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = All Stainless Steel, Type 316. • ZSS = Carbon Steel Flange with Stainless Steel Cone, Type 316. • HDGSS = Carbon Steel, Hot Dip Galvanized Flange with Stainless Steel Cone, Type 316. ^ O-‐Ring 2 Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Complete Flange Set Includes: • One (1) Flare Flange • One (1) O-‐Ring Face Cone • One (1) Face O-‐Ring (O-‐Ring 2) • One (1) Back Up O-‐Ring (O-‐Ring 1)

To be Ordered Separately:

• Bolt Kit See Section

Ordering Example: FFC34-‐CO-‐SCH80-‐200-‐SS-‐V

* Insert Material

^ Insert O-‐Ring 2 Type

DRAFT Complete Flange Set Includes:• One (1) Flare Flange• One (1) O-Ring Face Cone• One (1) Face O-Ring (O-Ring 2)• One (1) Back Up O-Ring (O-Ring 1)

To be Ordered Separately:• Bolt Kit (See Page G1)

Ordering Example: FFC34-CO-SCH80-200-SS-V

* Insert Material

^ Insert O-Ring 2 Type

TUBE-MAC.comG9


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Flare Flange Set O-Ring Face with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)


WT/Setlbs (kg)

Flange Part Number


Part Number

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number1/2" 20x2.0 FFCM34-CO-20x2.0-050-*-^ 0.67 (0.30) FFCM34-050-20MM-* CO-20x2.0-050-*-^ ORV-1715 OR^-2-210

1/2" 20x3.0 FFCM34-CO-20x3.0-050-*-^ 0.67 (0.30) FFCM34-050-20MM-* CO-20x3.0-050-*-^ ORV-1715 OR^-2-210



3/4” 20x2.0 FFCM34-CO-20x2.0-075-*-^ 0.70 (0.32) FFCM34-075-20MM-* CO-20x2.0-075-*-^ ORV-1715 OR^-2-214







1” 25x2.5 FFCM34-CO-25x2.5-100-*-^ 0.82 (0.37) FFCM34-100-25MM-* CO-25x2.5-100-*-^ ORV-2315 OR^-2-219









1-1/4" 30x3.0 FFCM34-CO-30x3.0-125-*-^ 1.07 (0.49) FFCM34-125-30MM-* CO-30x3.0-125-*-^ ORV-2815 OR^-2-222





1-1/4" 42x3.0 FFCM34-CO-42x3.0-125-*-^ 1.14 (0.52) FFC34-125-* CO-42x3.0-125-*-^ ORV-3815 OR^-2-222

1-1/4" 42x4.0 FFCM34-CO-42x4.0-125-*-^ 1.14 (0.52) FFC34-125-* CO-42x4.0-125-*-^ ORV-3815 OR^-2-222

FFCM34 - CO - Flare Flange Set O-Ring Face with Clearance Holes, Metric



SAE 3000 PSI Flare Flange Set O-‐Ring Face with Clearance Holes, Metric SAE J518 Code 61 (ISO 6162-‐1)

FFCM34-‐CO Metric Flange O-‐Ring Face Set with Clearance Holes


WT/Set lbs (kg)

Flange Part No.




1/2" 20x2.0 FFCM34-‐CO-‐20x2.0-‐050-‐*-‐^ 0.67 (0.30) FFCM34-‐050-‐20MM-‐* CO-‐20x2.0-‐050-‐*-‐^ ORV-‐1715 OR^-‐2-‐210

1/2" 20x3.0 FFCM34-‐CO-‐20x3.0-‐050-‐*-‐^ 0.67 (0.30) FFCM34-‐050-‐20MM-‐* CO-‐20x3.0-‐050-‐*-‐^ ORV-‐1715 OR^-‐2-‐210

1/2" 25x2.5 FFCM34-‐CO-‐25x2.5-‐050-‐*-‐^ 0.67 (0.30) FFCM34-‐050-‐25MM-‐* CO-‐25x2.5-‐050-‐*-‐^ OR^-‐2-‐210


3/4” 20x2.0 FFCM34-‐CO-‐20x2.0-‐075-‐*-‐^ 0.70 (0.32) FFCM34-‐075-‐20MM-‐* CO-‐20x2.0-‐075-‐*-‐^ OR^-‐2-‐214



3/4” 25x2.5 FFCM34-‐CO-‐25x2.5-‐075-‐*-‐^ 0.70 (0.32) FFCM34-‐075-‐25MM-‐* CO-‐25x2.5-‐075-‐*-‐^ ORV-‐2315 OR^-‐2-‐214

3/4” 25x3.0 FFCM34-‐CO-‐25x3.0-‐075-‐*-‐^ 0.70 (0.32) FFCM34-‐075-‐25MM-‐* CO-‐25x3.0-‐075-‐*-‐^ ORV-‐2315 OR^-‐2-‐214



1” 25x2.5 FFCM34-‐CO-‐25x2.5-‐100-‐*-‐^ 0.82 (0.37) FFCM34-‐100-‐25MM-‐* CO-‐25x2.5-‐100-‐*-‐^ OR^-‐2-‐219



1” 30x3.0 FFCM34-‐CO-‐30x3.0-‐100-‐*-‐^ 0.84 (0.38) FFCM34-‐100-‐30MM-‐* CO-‐30x3.0-‐100-‐*-‐^ ORV-‐2815 OR^-‐2-‐219





1 1/4" 30x3.0 FFCM34-‐CO-‐30x3.0-‐125-‐*-‐^ 1.07 (0.49) FFCM34-‐125-‐30MM-‐* CO-‐30x3.0-‐125-‐*-‐^ OR^-‐2-‐222



1 1/4" 38x4.0 FFCM34-‐CO-‐38x4.0-‐125-‐*-‐^ 1.09 (0.50) FFCM34-‐125-‐38MM-‐* CO-‐38x4.0-‐125-‐*-‐^ ORV-‐3515 OR^-‐2-‐222









Ordering Example: FFCM34-‐CO-‐50x3.0-‐200-‐SS-‐V

* Insert Material




Ordering Example: FFC34-CO-SCH80-200-SS-V

* Insert Material


G10TUBE-MAC.com


SAE 3000 PSI Flare Flange Set O-Ring Face with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)


WT/Setlbs (kg)

Flange Part Number


Part Number

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number1-1/2" 30x3.0 FFCM34-CO-30x3.0-150-*-^ 1.86 (0.85) FFCM34-150-30MM-* CO-30x3.0-150-*-^ ORV-2815 OR^-2-225







1-1/2” 50X6.0 FFCM34-CO-50X6.0-150-*-^ 1.91 (0.87) FFCM34-150-50MM-* CO-50X6.0-150-*-^ ORV-4515 OR^-2-225




2” 60x3.0 FFCM34-CO-60x3.0-200-*-^ 2.63 (1.20) FFC34-200-* CO-60x3.0-200-*-^ ORV-5715 OR^-2-228

2” 60x5.0 FFCM34-CO-60x5.0-200-*-^ 2.63 (1.20) FFCM4-200-* CO-60x5.0-200-*-^ ORV-5615 OR^-2-228

2” 60x6.0 FFCM34-CO-60x6.0-200-*-^ 2.63 (1.20) FFCM3-200-* CO-60x6.0-200-*-^ ORV-5615 OR^-2-228



2-1/2" 73x7.0 FFCM34-CO-73x7.0-250-*-^ 4.07 (1.85) FFCM34-250-73MM-* CO-73x7.0-250-*-^ ORV-2-232 OR^-2-232


2-1/2" 75x5.0 FFCM34-CO-75x5.0-250-*-^ 4.07 (1.85) FFCM34-250-75MM-* CO-75x5.0-250-*-^ ORV-2-036 OR^-2-232


3” 75x5.0 FFCM34-CO-75x5.0-300-*-^ 5.83 (2.65) FFCM34-300-75MM-* CO-75x5.0-300-*-^ ORV-2-237 OR^-2-237


3” 90x5.0 FFCM34-CO-90x5.0-300-*-^ 5.92 (2.69) FFCM34-300-90MM-* CO-90x5.0-300-*-^ ORV-2-040 OR^-2-237

FFCM34-CO Flare Flange Set - O-Ring Face with Clearance Holes, Metric



SAE 3000 PSI Flare Flange Set O-‐Ring Face with Clearance Holes, Metric SAE J518 Code 61 (ISO 6162-‐1)

FFCM34-‐CO Metric Flange O-‐Ring Face Set with Clearance Holes


WT/Set lbs (kg)

Flange Part No.










1 1/2" 50x5.0 FFCM34-‐CO-‐50x5.0-‐150-‐*-‐^ 1.91 (0.87) FFCM34-‐150-‐50MM-‐* CO-‐50x5.0-‐150-‐*-‐^ ORV-‐4515 OR^-‐2-‐225











2 1/2" 75x5.0 FFCM34-‐CO-‐75x5.0-‐250-‐*-‐^ 4.07 (1.85) FFCM34-‐250-‐75MM-‐* CO-‐75x5.0-‐250-‐*-‐^ ORV-‐2-‐036 OR^-‐2-‐232




3” 90x5.0 FFCM34-‐CO-‐90x5.0-‐300-‐*-‐^ 5.92 (2.69) FFCM34-‐300-‐90MM-‐* CO-‐90x5.0-‐300-‐*-‐^ ORV-‐2-‐040 OR^-‐2-‐237





Ordering Example: FFCM34-‐CO-‐50x3.0-‐200-‐SS-‐V

* Insert Material




Ordering Example: FFCM34-CO-50x3.0-200-SS-V

* Insert Material


TUBE-MAC.comG11


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n


WT/Setlbs (kg)

Flange Part Number

Flat Face Cone Insert

Part Number

O-Ring 1(VITON)

Part Number1/2" 1/2” SCH40 FFC34-CF-SCH40-050-* 0.67 (0.30) FFC34-050-* CF-SCH40-050-* ORV-1915

1/2" 1/2” SCH80 FFC34-CF-SCH80-050-* 0.66 (0.30) FFC34-050-* CF-SCH80-050-* ORV-1715



1” 1” SCH40 FFC34-CF-SCH40-100-* 0.87 (0.39) FFC34-100-* CF-SCH40-100-* ORV-3015

1” 1” SCH80 FFC34-CF-SCH80-100-* 0.87 (0.39) FFC34-100-* CF-SCH80-100-* ORV-2815

1-1/4" 1-1/4” SCH40 FFC34-CF-SCH40-125-* 1.12 (0.51) FFC34-125-* CF-SCH40-125-* ORV-3815

1-1/4" 1-1/4” SCH80 FFC34-CF-SCH80-125-* 1.12 (0.51) FFC34-125-* CF-SCH80-125-* ORV-3815

1-1/2" 1-1/2" SCH40 FFC34-CF-SCH40-150-* 1.94 (0.88) FFC34-150-* CF-SCH40-150-* ORV-4315



2" 2” SCH40 FFC34-CF-SCH40-200-* 2.69 (1.22) FFC34-200-* CF-SCH40-200-* ORV-5615



2-1/2" 2-1/2" SCH40 FFC34-CF-SCH40-250-* 4.09 (1.86) FFC34-250-* CF-SCH40-250-* ORV-2-036

2-1/2" 2-1/2" SCH80 FFC34-CF-SCH80-250-* 4.14 (1.88) FFC34-250-* CF-SCH80-250-* ORV-2-036


3" 3" SCH40 FFC34-CF-SCH40-300-* 5.99 (2.72) FFC34-300-* CF-SCH40-300-* ORV-2-041

3" 3" SCH80 FFC34-CF-SCH80-300-* 5.88 (2.67) FFC34-300-* CF-SCH80-300-* ORV-2-041

FFC34-CF - Flare Flange Set Flat Face with Clearance Holes, NPS


Ordering Example: FFC34-CF-SCH80-200-SS

* Insert Material

SAE 3000 PSI Flare Flange Set Flat Face with Clearance Holes, NPSSAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Flare Flange Set Flat Face with Clearance Holes, NPS SAE J518 Code 61 (ISO 6162-‐1)

FFC34-‐CF NPS Flange Flat Face Set with Clearance Holes


WT/Set lbs (kg)

Flange Part No.

Flat Face Cone Insert Part No.


1/2" 1/2” SCH40 FFC34-‐CF-‐SCH40-‐050-‐* 0.67 (0.30) FFC34-‐050-‐* CF-‐SCH40-‐050-‐* ORV-‐1915




1” 1” SCH40 FFC34-‐CF-‐SCH40-‐100-‐* 0.87 (0.39) FFC34-‐100-‐* CF-‐SCH40-‐100-‐* ORV-‐3015

1” 1” SCH80 FFC34-‐CF-‐SCH80-‐100-‐* 0.87 (0.39) FFC34-‐100-‐* CF-‐SCH80-‐100-‐* ORV-‐2815

1 1/4" 1 1/4” SCH40 FFC34-‐CF-‐SCH40-‐125-‐* 1.12 (0.51) FFC34-‐125-‐* CF-‐SCH40-‐125-‐* ORV-‐3815

1 1/4" 1 1/4” SCH80 FFC34-‐CF-‐SCH80-‐125-‐* 1.12 (0.51) FFC34-‐125-‐* CF-‐SCH80-‐125-‐* ORV-‐3815

1 1/2" 1 1/2" SCH40 FFC34-‐CF-‐SCH40-‐150-‐* 1.94 (0.88) FFC34-‐150-‐* CF-‐SCH40-‐150-‐* ORV-‐4315



2" 2” SCH40 FFC34-‐CF-‐SCH40-‐200-‐* 2.69 (1.22) FFC34-‐200-‐* CF-‐SCH40-‐200-‐* ORV-‐5615



2 1/2" 2 1/2" SCH40 FFC34-‐CF-‐SCH40-‐250-‐* 4.09 (1.86) FFC34-‐250-‐* CF-‐SCH40-‐250-‐* ORV-‐2-‐036



3" 3" SCH40 FFC34-‐CF-‐SCH40-‐300-‐* 5.99 (2.72) FFC34-‐300-‐* CF-‐SCH40-‐300-‐* ORV-‐2-‐041

3" 3" SCH80 FFC34-‐CF-‐SCH80-‐300-‐* 5.88 (2.67) FFC34-‐300-‐* CF-‐SCH80-‐300-‐* ORV-‐2-‐041

* Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = All Stainless Steel, Type 316. • ZSS = Carbon Steel Flange with Stainless Steel Cone, Type 316. • HDGSS = Carbon Steel, Hot Dip Galvanized Flange with Stainless Steel Cone, Type 316.

Complete Flange Set Includes: • One (1) Flare Flange • One (1) Flat Face Cone • One (1) Back Up O-‐Ring (O-‐Ring 1)



Ordering Example: FFC34-‐CF-‐SCH80-‐200-‐SS

* Insert Material

DRAFT Complete Flange Set Includes:• One (1) Flare Flange• One (1) Flat Face Cone• One (1) Back Up O-Ring (O-Ring 1)


G12TUBE-MAC.com



WT/Setlbs (kg)

Flange Part Number


Part Number

O-Ring 1(VITON)

Part Number1/2" 20x2.0 FFCM34-CF-20x2.0-050-* 0.67 (0.30) FFCM34-050-20MM-* CF-20x2.0-050-* ORV-1715

1/2" 20x3.0 FFCM34-CF-20x3.0-050-* 0.67 (0.30) FFCM34-050-20MM-* CF-20x3.0-050-* ORV-1715



3/4” 20x2.0 FFCM34-CF-20x2.0-075-* 0.70 (0.32) FFCM34-075-20MM-* CF-20x2.0-075-* ORV-1715







1” 25x2.5 FFCM34-CF-25x2.5-100-* 0.83 (0.37) FFCM34-100-25MM-* CF-25x2.5-100-* ORV-2315






1” 38X3.0 FFCM34-CF-38X3.0-100-* 0.86 (0.38) FFCM34-100-38MM-* CF-38X3.0-100-* ORV-4515



1-1/4" 30x3.0 FFCM34-CF-30x3.0-125-* 1.08 (0.49) FFCM34-125-30MM-* CF-30x3.0-125-* ORV-2815






1-1/4" 42x3.0 FFCM34-CF-42x3.0-125-* 1.15 (0.53) FFC34-125-* CF-42x3.0-125-* ORV-3815

1-1/4" 42x4.0 FFCM34-CF-42x4.0-125-* 1.15 (0.53) FFC34-125-* CF-42x4.0-125-* ORV-3815

FFCM34-CF - Flare Flange Set - Flat Face with Clearance Holes, Metric


Ordering Example: FFCM34-CF-50x3.0-200-SS

* Insert Material

SAE 3000 PSI Flare Flange Set Flat Face with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)SAE 3000 PSI Flare Flange Set Flat Face with Clearance Holes, Metric

SAE J518 Code 61 (ISO 6162-‐1)

FFCM34-‐CF Metric Flange Flat Face Set with Clearance Holes


WT lbs (kg)

Flange Part No.



1/2" 20x2.0 FFCM34-‐CF-‐20x2.0-‐050-‐* 0.67 (0.30) FFCM34-‐050-‐20MM-‐* CF-‐20x2.0-‐050-‐* ORV-‐1715

1/2" 20x3.0 FFCM34-‐CF-‐20x3.0-‐050-‐* 0.67 (0.30) FFCM34-‐050-‐20MM-‐* CF-‐20x3.0-‐050-‐* ORV-‐1715

1/2" 25x2.5 FFCM34-‐CF-‐25x2.5-‐050-‐* 0.67 (0.30) FFCM34-‐050-‐25MM-‐* CF-‐25x2.5-‐050-‐*


3/4” 20x2.0 FFCM34-‐CF-‐20x2.0-‐075-‐* 0.70 (0.32) FFCM34-‐075-‐20MM-‐* CF-‐20x2.0-‐075-‐*



3/4” 25x2.5 FFCM34-‐CF-‐25x2.5-‐075-‐* 0.70 (0.32) FFCM34-‐075-‐25MM-‐* CF-‐25x2.5-‐075-‐* ORV-‐2315

3/4” 25x3.0 FFCM34-‐CF-‐25x3.0-‐075-‐* 0.70 (0.32) FFCM34-‐075-‐25MM-‐* CF-‐25x3.0-‐075-‐* ORV-‐2315



1” 25x2.5 FFCM34-‐CF-‐25x2.5-‐100-‐* 0.83 (0.37) FFCM34-‐100-‐25MM-‐* CF-‐25x2.5-‐100-‐*



1” 30x3.0 FFCM34-‐CF-‐30x3.0-‐100-‐* 0.85 (0.38) FFCM34-‐100-‐30MM-‐* CF-‐30x3.0-‐100-‐* ORV-‐2815





1 1/4" 30x3.0 FFCM34-‐CF-‐30x3.0-‐125-‐* 1.08 (0.49) FFCM34-‐125-‐30MM-‐* CF-‐30x3.0-‐125-‐*



1 1/4" 38x4.0 FFCM34-‐CF-‐38x4.0-‐125-‐* 1.10 (0.50) FFCM34-‐125-‐38MM-‐* CF-‐38x4.0-‐125-‐* ORV-‐3515









Ordering Example: FFCM34-‐CF-‐50x3.0-‐200-‐SS

* Insert Material



TUBE-MAC.comG13


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n


WT/Setlbs (kg)

Flange Part Number


Part Number

O-Ring 1(VITON)

Part Number1-1/2" 30x3.0 FFCM34-CF-30x3.0-150-* 1.87 (0.85) FFCM34-150-30MM-* CF-30x3.0-150-* ORV-2815










2” 60x3.0 FFCM34-CF-60x3.0-200-* 2.65 (1.21) FFC34-200-* CF-60x3.0-200-* ORV-5715





2-1/2" 73x7.0 FFCM34-CF-73x7.0-250-* 4.11 (1.87) FFCM34-250-73MM-* CF-73x7.0-250-* ORV-2-232


2-1/2" 75x5.0 FFCM34-CF-75x5.0-250-* 4.11 (1.87) FFCM34-250-75MM-* CF-75x5.0-250-* ORV-2-036


3” 75x5.0 FFCM34-CF-75x5.0-300-* 5.88 (2.67) FFCM34-300-75MM-* CF-75x5.0-300-* ORV-2-237


3” 90x5.0 FFCM34-CF-90x5.0-300-* 5.97 (2.71) FFCM34-300-90MM-* CF-90x5.0-300-* ORV-2-040

FFCM34-CF - Flare Flange Set - Flat Face with Clearance Holes, Metric


Ordering Example: FFCM34-CF-50x3.0-200-SS

* Insert Material

SAE 3000 PSI Flare Flange Set Flat Face with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Flare Flange Set Flat Face with Clearance Holes, Metric SAE J518 Code 61 (ISO 6162-‐1)

FFCM34-‐CF Metric Flange Flat Face Set with Clearance Holes


WT lbs (kg)

Flange Part No.









1 1/2" 50x5.0 FFCM34-‐CF-‐50x5.0-‐150-‐* 1.93 (0.88) FFCM34-‐150-‐50MM-‐* CF-‐50x5.0-‐150-‐* ORV-‐4515











2 1/2" 75x5.0 FFCM34-‐CF-‐75x5.0-‐250-‐* 4.11 (1.87) FFCM34-‐250-‐75MM-‐* CF-‐75x5.0-‐250-‐* ORV-‐2-‐036




3” 90x5.0 FFCM34-‐CF-‐90x5.0-‐300-‐* 5.97 (2.71) FFCM34-‐300-‐90MM-‐* CF-‐90x5.0-‐300-‐* ORV-‐2-‐040





Ordering Example: FFCM34-‐CF-‐50x3.0-‐200-‐SS

* Insert Material



G14TUBE-MAC.com



WT/Setlbs (kg)

Flange Part Number


Part Number

O-Ring 1(VITON)

Part Number1/2" 1/2” SCH40 FFC34-CD-SCH40-050-* 1.32 (0.59) FFC34-050-* CD-SCH40-050-* ORV-1915

1/2" 1/2” SCH80 FFC34-CD-SCH80-050-* 1.30 (0.58) FFC34-050-* CD-SCH80-050-* ORV-1715



1” 1” SCH40 FFC34-CD-SCH40-100-* 1.53 (0.69) FFC34-100-* CD-SCH40-100-* ORV-3015

1” 1” SCH80 FFC34-CD-SCH80-100-* 1.54 (0.69) FFC34-100-* CD-SCH80-100-* ORV-2815

1-1/4" 1-1/4” SCH40 FFC34-CD-SCH40-125-* 1.61 (0.72) FFC34-125-* CD-SCH40-125-* ORV-3815

1-1/4" 1-1/4” SCH80 FFC34-CD-SCH80-125-* 1.66 (0.76) FFC34-125-* CD-SCH80-125-* ORV-3815

1-1/2" 1-1/2" SCH40 FFC34-CD-SCH40-150-* 2.00 (0.91) FFC34-150-* CD-SCH40-150-* ORV-4315



2" 2” SCH40 FFC34-CD-SCH40-200-* 2.12 (0.97) FFC34-200-* CD-SCH40-200-* ORV-5615



2-1/2" 2-1/2" SCH40 FFC34-CD-SCH40-250-* 3.18 (1.44) FFC34-250-* CD-SCH40-250-* ORV-2-036

2-1/2" 2-1/2" SCH80 FFC34-CD-SCH80-250-* 3.23 (1.46) FFC34-250-* CD-SCH80-250-* ORV-2-036


3" 3" SCH40 FFC34-CD-SCH40-300-* 3.86 (1.75) FFC34-300-* CD-SCH40-300-* ORV-2-041

3" 3" SCH80 FFC34-CD-SCH80-300-* 3.65 (1.65) FFC34-300-* CD-SCH80-300-* ORV-2-041

FFC34-CD - Flare Flange Double Cone Union Set with Clearance Holes, NPS


Ordering Example: FFCM34-CD-50x3.0-200-SS

* Insert Material

SAE 3000 PSI Flare Flange Double Cone Union Set with Clearance Holes, NPSSAE J518 Code 61 (ISO 6162-1)SAE 3000 PSI Flare Flange Double Cone Union Set with Clearance Holes, NPS

SAE J518 Code 61 (ISO 6162-‐1)

FFC34-‐CD NPS Flange Double Cone Union Set with Clearance Holes


WT/Set lbs (kg)

Flange Part No.

Double Cone Insert Part No.


1/2" 1/2” SCH40 FFC34-‐CD-‐SCH40-‐050-‐* 1.32 (0.59) FFC34-‐050-‐* CD-‐SCH40-‐050-‐* ORV-‐1915




1” 1” SCH40 FFC34-‐CD-‐SCH40-‐100-‐* 1.53 (0.69) FFC34-‐100-‐* CD-‐SCH40-‐100-‐* ORV-‐3015

1” 1” SCH80 FFC34-‐CD-‐SCH80-‐100-‐* 1.54 (0.69) FFC34-‐100-‐* CD-‐SCH80-‐100-‐* ORV-‐2815

1 1/4" 1 1/4” SCH40 FFC34-‐CD-‐SCH40-‐125-‐* 1.61 (0.72) FFC34-‐125-‐* CD-‐SCH40-‐125-‐* ORV-‐3815

1 1/4" 1 1/4” SCH80 FFC34-‐CD-‐SCH80-‐125-‐* 1.66 (0.76) FFC34-‐125-‐* CD-‐SCH80-‐125-‐* ORV-‐3815

1 1/2" 1 1/2" SCH40 FFC34-‐CD-‐SCH40-‐150-‐* 2.00 (0.91) FFC34-‐150-‐* CD-‐SCH40-‐150-‐* ORV-‐4315



2" 2” SCH40 FFC34-‐CD-‐SCH40-‐200-‐* 2.12 (0.97) FFC34-‐200-‐* CD-‐SCH40-‐200-‐* ORV-‐5615



2 1/2" 2 1/2" SCH40 FFC34-‐CD-‐SCH40-‐250-‐* 3.18 (1.44) FFC34-‐250-‐* CD-‐SCH40-‐250-‐* ORV-‐2-‐036



3" 3" SCH40 FFC34-‐CD-‐SCH40-‐300-‐* 3.86 (1.75) FFC34-‐300-‐* CD-‐SCH40-‐300-‐* ORV-‐2-‐041

3" 3" SCH80 FFC34-‐CD-‐SCH80-‐300-‐* 3.65 (1.65) FFC34-‐300-‐* CD-‐SCH80-‐300-‐* ORV-‐2-‐041


Ordering Example: FFC34-‐CD-‐SCH80-‐200-‐SS

* Insert Material

Complete Flange Set Includes: • Two (2) Flare Flanges • One (1) Double Cone • One (1) Back Up O-‐Ring (O-‐Ring 1)



DRAFT Complete Flange Set Includes:• Two (2) Flare Flanges• One (1) Double Cone• Two (2) Back Up O-Rings (0-Ring 1)


TUBE-MAC.comG15


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n


WT/Setlbs (kg)

Flange Part Number

Double ConeInsert

Part Number

O-Ring 1(VITON)

Part Number1/2" 20x2.0 FFCM34-CD-20x2.0-050-* 1.33 (0.60) FFCM34-050-20MM-* CD-20x2.0-050-* ORV-1715

1/2" 20x3.0 FFCM34-CD-20x3.0-050-* 1.33 (0.60) FFCM34-050-20MM-* CD-20x3.0-050-* ORV-1715



3/4” 20x2.0 FFCM34-CD-20x2.0-075-* 1.39 (0.64) FFCM34-075-20MM-* CD-20x2.0-075-* ORV-1715







1” 25x2.5 FFCM34-CD-25x2.5-100-* 1.63 (0.74) FFCM34-100-25MM-* CD-25x2.5-100-* ORV-2315






1” 38X3.0 FFCM34-CD-38X3.0-100-* 1.69 (0.77) FFCM34-100-30MM-* CD-38X3.0-100-* ORV-4515



1-1/4" 30x3.0 FFCM34-CD-30x3.0-125-* 2.13 (0.97) FFCM34-125-30MM-* CD-30x3.0-125-* ORV-2815






1-1/4" 42x3.0 FFCM34-CD-42x3.0-125-* 2.26 (1.03) FFC34-125-* CD-42x3.0-125-* ORV-3815

1-1/4" 42x4.0 FFCM34-CD-42x4.0-125-* 2.26 (1.03) FFC34-125-* CD-42x4.0-125-* ORV-3815

FFCM34-CD - Flare Flange Double Cone Union Set with Clearance Holes, Metric



* Insert Material

SAE 3000 PSI Flare Flange Double Cone Union Set with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)SAE 3000 PSI Flare Flange Double Cone Union Set with Clearance Holes, Metric

SAE J518 Code 61 (ISO 6162-‐1)

FFCM34-‐CD Metric Flange Double Cone Union Set with Clearance Holes


WT/Set lbs (kg)

Flange Part No.



1/2" 20x2.0 FFCM34-‐CD-‐20x2.0-‐050-‐* 1.33 (0.60) FFCM34-‐050-‐20MM-‐* CD-‐20x2.0-‐050-‐* ORV-‐1715

1/2" 20x3.0 FFCM34-‐CD-‐20x3.0-‐050-‐* 1.33 (0.60) FFCM34-‐050-‐20MM-‐* CD-‐20x3.0-‐050-‐* ORV-‐1715

1/2" 25x2.5 FFCM34-‐CD-‐25x2.5-‐050-‐* 1.33 (0.60) FFCM34-‐050-‐25MM-‐* CD-‐25x2.5-‐050-‐*


3/4” 20x2.0 FFCM34-‐CD-‐20x2.0-‐075-‐* 1.39 (0.64) FFCM34-‐075-‐20MM-‐* CD-‐20x2.0-‐075-‐*



3/4” 25x2.5 FFCM34-‐CD-‐25x2.5-‐075-‐* 1.39 (0.64) FFCM34-‐075-‐25MM-‐* CD-‐25x2.5-‐075-‐* ORV-‐2315

3/4” 25x3.0 FFCM34-‐CD-‐25x3.0-‐075-‐* 1.39 (0.64) FFCM34-‐075-‐25MM-‐* CD-‐25x3.0-‐075-‐* ORV-‐2315



1” 25x2.5 FFCM34-‐CD-‐25x2.5-‐100-‐* 1.63 (0.74) FFCM34-‐100-‐25MM-‐* CD-‐25x2.5-‐100-‐*



1” 30x3.0 FFCM34-‐CD-‐30x3.0-‐100-‐* 1.67 (0.76) FFCM34-‐100-‐30MM-‐* CD-‐30x3.0-‐100-‐* ORV-‐2815





1 1/4" 30x3.0 FFCM34-‐CD-‐30x3.0-‐125-‐* 2.13 (0.97) FFCM34-‐125-‐30MM-‐* CD-‐30x3.0-‐125-‐*



1 1/4" 38x4.0 FFCM34-‐CD-‐38x4.0-‐125-‐* 2.17 (0.99) FFCM34-‐125-‐38MM-‐* CD-‐38x4.0-‐125-‐* ORV-‐3515






Ordering Example: FFCM34-‐CD-‐50x3.0-‐200-‐SS

* Insert Material






G16TUBE-MAC.com



WT/Setlbs (kg)

Flange Part Number

Double ConeInsert

Part Number

O-Ring 1(VITON)

Part Number1-1/2" 30x3.0 FFCM34-CD-30x3.0-150-* 3.70 (1.69) FFCM34-150-30MM-* CD-30x3.0-150-* ORV-2815










2” 60x3.0 FFCM34-CD-60x3.0-200-* 5.23 (2.38) FFC34-200-* CD-60x3.0-200-* ORV-5715





2-1/2" 73x7.0 FFCM34-CD-73x7.0-250-* 8.08 (3.67) FFCM34-250-73MM-* CD-73x7.0-250-* ORV-2-232


2-1/2" 75x5.0 FFCM34-CD-75x5.0-250-* 8.08 (3.67) FFCM34-250-75MM-* CD-75x5.0-250-* ORV-2-036


3” 75x5.0 FFCM34-CD-75x5.0-300-* 11.58 (5.26) FFCM34-300-75MM-* CD-75x5.0-300-* ORV-2-237


3” 90x5.0 FFCM34-CD-90x5.0-300-* 11.76 (5.34) FFCM34-300-90MM-* CD-90x5.0-300-* ORV-2-040

FFCM34-CD - Flare Flange Double Cone Union Set with Clearance Holes, Metric



* Insert Material

SAE 3000 PSI Flare Flange Double Cone Union Set with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Flare Flange Double Cone Union Set with Clearance Holes, Metric SAE J518 Code 61 (ISO 6162-‐1)

FFCM34-‐CD Metric Flange Double Cone Union Set with Clearance Holes


WT/Set lbs (kg)

Flange Part No.









1 1/2" 50x5.0 FFCM34-‐CD-‐50x5.0-‐150-‐* 3.79 (1.73) FFCM34-‐150-‐50MM-‐* CD-‐50x5.0-‐150-‐* ORV-‐4515











2 1/2" 75x5.0 FFCM34-‐CD-‐75x5.0-‐250-‐* 8.08 (3.67) FFCM34-‐250-‐75MM-‐* CD-‐75x5.0-‐250-‐* ORV-‐2-‐036




3” 90x5.0 FFCM34-‐CD-‐90x5.0-‐300-‐* 11.76 (5.34) FFCM34-‐300-‐90MM-‐* CD-‐90x5.0-‐300-‐* ORV-‐2-‐040


Ordering Example: FFCM34-‐CD-‐50x3.0-‐200-‐SS

* Insert Material






TUBE-MAC.comG17


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Cone Inserts for Flare Flange Connections, NPSSAE J518 Code 61 (ISO 6162-1)

Size Pipe Size


Part Number(Type CO)

WT/Setlbs (kg)


Part Number(Type CF)

WT/Setlbs (kg)

Double Cone Insert

Part Number(Type CD)

WT/Setlbs (kg)

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number

1/2" 1/2” SCH40 CO-SCH40-050-*-^ 0.10 (0.50) CF-SCH40-050-* 0.11 (0.05) CD-SCH40-050-* 0.20 (0.09) ORV-1915 OR^-2-210




1” 1” SCH40 CO-SCH40-100-*-^ 0.20 (0.09) CF-SCH40-100-* 0.23 (0.10) CD-SCH40-100-* 0.41 (0.19) ORV-3015 OR^-2-219

1” 1” SCH80 CO-SCH80-100-*-^ 0.21 (0.10) CF-SCH80-100-* 0.23 (0.10) CD-SCH80-100-* 0.42 (0.19) ORV-2815 OR^-2-219

1-1/4" 1-1/4” SCH40 CO-SCH40-125-*-^ 0.25 (0.11) CF-SCH40-125-* 0.27 (0.12) CD-SCH40-125-* 0.49 (0.22) ORV-3815 OR^-2-222

1-1/4" 1-1/4” SCH80 CO-SCH80-125-*-^ 0.24 (0.11) CF-SCH80-125-* 0.27 (0.12) CD-SCH80-125-* 0.48 (0.22) ORV-3815 OR^-2-222

1-1/2" 1-1/2" SCH40 CO-SCH40-150-*-^ 0.41 (0.19) CF-SCH40-150-* 0.45 (0.20) CD-SCH40-150-* 0.82 (0.37) ORV-4315 OR^-2-225



2" 2” SCH40 CO-SCH40-200-*-^ 0.47 (0.21) CF-SCH40-200-* 0.52 (0.24) CD-SCH40-200-* 0.94 (0.43) ORV-5615 OR^-2-228



2-1/2" 2-1/2" SCH40 CO-SCH40-250-*-^ 0.99 (0.45) CF-SCH40-250-* 1.01 (0.46) CD-SCH40-250-* 1.90 (0.86) ORV-2-036 OR^-2-232

2-1/2" 2-1/2" SCH80 CO-SCH80-250-*-^ 0.99 (0.45) CF-SCH80-250-* 1.06 (0.48) CD-SCH80-250-* 1.95 (0.88) ORV-2-036 OR^-2-232


3" 3" SCH40 CO-SCH40-300-*-^ 1.33 (0.60) CF-SCH40-300-* 1.39 (0.63) CD-SCH40-300-* 2.58 (1.17) ORV-2-040 OR^-2-237

3" 3" SCH80 CO-SCH80-300-*-^ 1.21 (0.55) CF-SCH80-300-* 1.28 (0.58) CD-SCH80-300-* 2.37 (1.07) ORV-2-040 OR^-2-237

CO, CF, CD - Cone Inserts for Flare Flange Connections, NPS

* Materials:Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.


SAE 3000 PSI Cone Inserts for Flare Flange Connections, NPS SAE J518 Code 61 (ISO 6162-‐1)

CO, CF and CD NPS Cone Inserts for Flare Flange Connections

Size Pipe Size O-‐Ring Face Cone Insert Part No. (Type CO)

WT lbs (kg)


(Type CF)

WT lbs (kg)

Double Cone Insert Part No. (Type CD)

WT lbs (kg)



1/2" 1/2” SCH40 CO-‐SCH40-‐050-‐*-‐^ 0.10 (0.50) CF-‐SCH40-‐050-‐* 0.11 (0.05) CD-‐SCH40-‐050-‐* 0.20 (0.09) ORV-‐1915 OR^-‐2-‐210




1” 1” SCH40 CO-‐SCH40-‐100-‐*-‐^ 0.20 (0.09) CF-‐SCH40-‐100-‐* 0.23 (0.10) CD-‐SCH40-‐100-‐* 0.41 (0.19) ORV-‐3015 OR^-‐2-‐219

1” 1” SCH80 CO-‐SCH80-‐100-‐*-‐^ 0.21 (0.10) CF-‐SCH80-‐100-‐* 0.23 (0.10) CD-‐SCH80-‐100-‐* 0.42 (0.19) ORV-‐2815 OR^-‐2-‐219

1 1/4" 1 1/4” SCH40 CO-‐SCH40-‐125-‐*-‐^ 0.25 (0.11) CF-‐SCH40-‐125-‐* 0.27 (0.12) CD-‐SCH40-‐125-‐* 0.49 (0.22) ORV-‐3815 OR^-‐2-‐222

1 1/4" 1 1/4” SCH80 CO-‐SCH80-‐125-‐*-‐^ 0.24 (0.11) CF-‐SCH80-‐125-‐* 0.27 (0.12) CD-‐SCH80-‐125-‐* 0.48 (0.22) ORV-‐3815 OR^-‐2-‐222

1 1/2" 1 1/2" SCH40 CO-‐SCH40-‐150-‐*-‐^ 0.41 (0.19) CF-‐SCH40-‐150-‐* 0.45 (0.20) CD-‐SCH40-‐150-‐* 0.82 (0.37) ORV-‐4315 OR^-‐2-‐225



2" 2” SCH40 CO-‐SCH40-‐200-‐*-‐^ 0.47 (0.21) CF-‐SCH40-‐200-‐* 0.52 (0.24) CD-‐SCH40-‐200-‐* 0.94 (0.43) ORV-‐5615 OR^-‐2-‐228



2 1/2" 2 1/2" SCH40 CO-‐SCH40-‐250-‐*-‐^ 0.99 (0.45) CF-‐SCH40-‐250-‐* 1.01 (0.46) CD-‐SCH40-‐250-‐* 1.90 (0.86) ORV-‐2-‐036 OR^-‐2-‐232



3" 3" SCH40 CO-‐SCH40-‐300-‐*-‐^ 1.33 (0.60) CF-‐SCH40-‐300-‐* 1.39 (0.63) CD-‐SCH40-‐300-‐* 2.58 (1.17) ORV-‐2-‐041 OR^-‐2-‐237

3" 3" SCH80 CO-‐SCH80-‐300-‐*-‐^ 1.21 (0.55) CF-‐SCH80-‐300-‐* 1.28 (0.58) CD-‐SCH80-‐300-‐* 2.37 (1.07) ORV-‐2-‐041 OR^-‐2-‐237

* Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = All Stainless Steel, Type 316. ^ O-‐Ring 2 Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Ordering Example: CO-‐SCH80-‐200-‐SS-‐V

* Insert Material


DRAFT

Ordering Example: CO-SCH80-200-SS-V

* Insert Material


G18TUBE-MAC.com


SAE 3000 PSI Cone Inserts with Pilot Portfor Flare Flange Connections, NPSSAE J518 Code 61 (ISO 6162-1)

Size Pipe Size

O-Ring Face Cone Insert

Part Number(Type COP)

WT/Setlbs (kg)


Part Number(Type CFP)

WT/Setlbs (kg)

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number

1/2" 1/2” SCH40 COP-SCH40-050-*-^ 0.40 (0.18) CFP-SCH40-050-* 0.40 (0.18) ORV-1915 OR^-2-210




1” 1” SCH40 COP-SCH40-100-*-^ 0.77 (0.35) CFP-SCH40-100-* 0.77 (0.35) ORV-3015 OR^-2-219

1” 1” SCH80 COP-SCH80-100-*-^ 0.77 (0.35) CFP-SCH80-100-* 0.77 (0.35) ORV-2815 OR^-2-219

1-1/4" 1-1/4” SCH40 COP-SCH40-125-*-^ 0.93 (0.42) CFP-SCH40-125-* 0.93 (0.42) ORV-3815 OR^-2-222





2" 2” SCH40 COP-SCH40-200-*-^ 1.70 (0.77) CFP-SCH40-200-* 1.70 (0.77) ORV-5615 OR^-2-228



2-1/2” 2-1/2” SCH40 COP-SCH40-250-*-^ 2.51 (1.14) CFP-SCH40-250-* 2.51 (1.14) ORV-2-036 OR^-2-232

2-1/2” 2-1/2” SCH80 COP-SCH80-250-*-^ 2.51 (1.14) CFP-SCH80-250-* 2.51 (1.14) ORV-2-036 OR^-2-232

2-1/2” 2-1/2” SCH160 COP-SCH160-250-*-^ 2.43 (1.10) CFP-SCH160-250-* 2.43 (1.10) ORV-5615 OR^-2-232

3" 3" SCH40 COP-SCH40-300-*-^ 3.40 (1.54) CFP-SCH40-300-* 3.40 (1.54) ORV-2-041 OR^-2-237

3" 3" SCH80 COP-SCH80-300-*-^ 3.40 (1.54) CFP-SCH80-300-* 3.40 (1.54) ORV-2-041 OR^-2-237

COP, CFP - Cone Inserts with Pilot Port for Flare Flange Connections, NPS



Ordering Example: COP-SCH80-200-SS-V

* Insert Material


TUBE-MAC.comG19


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Cone Insertsfor Flare Flange Connections, MetricSAE J518 Code 61 (ISO 6162-1)

Size Pipe Size



Weightlbs (kg)



Weightlbs (kg)

Double Cone Insert


Weightlbs (kg)

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number

1/2" 20x2.0 CO-20x2.0-050-*-^ 0.11 (0.05) CF-20x2.0-050-* 0.11 (0.05) CD-20x2.0-050-* 0.20 (0.09) ORV-1715 OR^-2-210




3/4” 20x2.0 CO-20x2.0-075-*-^ 0.14 (0.07) CF-20x2.0-075-* 0.14 (0.07) CD-20x2.0-075-* 0.26 (0.12) ORV-1715 OR^-2-214







1” 25x2.5 CO-25x2.5-100-*-^ 0.14 (0.07) CF-25x2.5-100-* 0.14 (0.07) CD-25x2.5-100-* 0.26 (0.12) ORV-2315 OR^-2-219








1-1/4" 30x3.0 CO-30x3.0-125-*-^ 0.24 (0.11) CF-30x3.0-125-* 0.24 (0.11) CD-30x3.0-125-* 0.46 (0.21) ORV-2815 OR^-2-222







CO, CF, CD - Cone Inserts for Flare Flange Connections, Metric



SAE 3000 PSI Cone Inserts for Flare Flange Connections, Metric SAE J518 Code 61 (ISO 6162-‐1)

CO, CF and CD Metric Cone Inserts for Flare Flange Connections


WT lbs (kg)


(Type CF)

WT lbs (kg)


WT lbs (kg)



1/2" 20x2.0 CO-‐20x2.0-‐050-‐*-‐^ 0.11 (0.05) CF-‐20x2.0-‐050-‐* 0.11 (0.05) CD-‐20x2.0-‐050-‐* ORV-‐1715 OR^-‐2-‐210




3/4” 20x2.0 CO-‐20x2.0-‐075-‐*-‐^ CF-‐20x2.0-‐075-‐* CD-‐20x2.0-‐075-‐* ORV-‐1715 OR^-‐2-‐214

3/4” 20x2.5 CO-‐20x2.5-‐075-‐*-‐^ 0.16 (0.07) CF-‐20x2.5-‐075-‐* 0.16 (0.07) CD-‐20x2.5-‐075-‐* ORV-‐1715 OR^-‐2-‐214

3/4" 20x3.0 CO-‐20x3.0-‐075-‐*-‐^ CF-‐20x3.0-‐075-‐* CD-‐20x3.0-‐075-‐* ORV-‐1715 OR^-‐2-‐214





1” 25x2.5 CO-‐25x2.5-‐100-‐*-‐^ CF-‐25x2.5-‐100-‐* CD-‐25x2.5-‐100-‐* ORV-‐2315 OR^-‐2-‐219

1” 25x3.0 CO-‐25x3.0-‐100-‐*-‐^ 0.14 (0.07) CF-‐25x3.0-‐100-‐* 0.14 (0.07) CD-‐25x3.0-‐100-‐* ORV-‐2815 OR^-‐2-‐219







1 1/4" 30x3.0 CO-‐30x3.0-‐125-‐*-‐^ 0.24 (0.11) CF-‐30x3.0-‐125-‐* 0.24 (0.11) CD-‐30x3.0-‐125-‐* ORV-‐2815 OR^-‐2-‐222

1 1/4" 30x4.0 CO-‐30x4.0-‐125-‐*-‐^ CF-‐30x4.0-‐125-‐* CD-‐30x4.0-‐125-‐* ORV-‐2815 OR^-‐2-‐222








Ordering Example: CO-‐50x3.0-‐200-‐SS-‐V

* Insert Material


DRAFT

Ordering Example: CO-50x3.0-200-SS-V

* Insert Material


G20TUBE-MAC.com


SAE 3000 PSI Cone Insertsfor Flare Flange Connections, MetricSAE J518 Code 61 (ISO 6162-1)

Size Pipe Size



Weightlbs (kg)



Weightlbs (kg)

Double Cone Insert


Weightlbs (kg)

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number

















2-1/2" 73x7.0 CO-73x7.0-250-*-^ 1.00 (0.45) CF-73x7.0-250-* 1.08 (0.49) CD-73x7.0-250-* 2.00 (0.90) ORV-2-036 OR^-2-232




3” 75x5.0 CO-75x5.0-300-*-^ 1.50 (0.68) CF-75x5.0-300-* 1.50 (0.68) CD-75x5.0-300-* 2.70 (1.23) ORV-2-037 OR^-2-237



CO, CF, CD - Cone Inserts for Flare Flange Connections, Metric



SAE 3000 PSI Cone Inserts for Flare Flange Connections, Metric SAE J518 Code 61 (ISO 6162-‐1)

CO, CF and CD Metric Cone Inserts for Flare Flange Connections


WT lbs (kg)


(Type CF)

WT lbs (kg)


WT lbs (kg)







3/4” 20x2.0 CO-‐20x2.0-‐075-‐*-‐^ CF-‐20x2.0-‐075-‐* CD-‐20x2.0-‐075-‐* ORV-‐1715 OR^-‐2-‐214


3/4" 20x3.0 CO-‐20x3.0-‐075-‐*-‐^ CF-‐20x3.0-‐075-‐* CD-‐20x3.0-‐075-‐* ORV-‐1715 OR^-‐2-‐214






















Ordering Example: CO-‐50x3.0-‐200-‐SS-‐V

* Insert Material


DRAFT

Ordering Example: CO-50x3.0-200-SS-V

* Insert Material


TUBE-MAC.comG21


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Cone Inserts with Pilot Portfor Flare Flange Connections, MetricSAE J518 Code 61 (ISO 6162-1)

Size Pipe Size



WTlbs (kg)



WTlbs (kg)

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number

1/2" 20x2.0 COP-20x2.0-050-*-^ 0.40 (0.18) CFP-20x2.0-050-* 0.40 (0.18) ORV-1715 OR^-2-210

1/2" 20x3.0 COP-20x3.0-050-*-^ 0.40 (0.18) CFP-20x3.0-050-* 0.40 (0.18) ORV-1715 OR^-2-210

1/2" 25x2.5 COP-25x2.5-050-*-^ 0.51 (0.23) CFP-25x2.5-050-* 0.51 (0.23) ORV-2315 OR^-2-210

1/2" 25x3.0 COP-25x3.0-050-*-^ 0.51 (0.23) CFP-25x3.0-050-* 0.51 (0.23) ORV-2315 OR^-2-210

3/4” 20x2.0 COP-20x2.0-075-*-^ 0.55 (0.25) CFP-20x2.0-075-* 0.55 (0.25) ORV-1715 OR^-2-214

3/4” 20x2.5 COP-20x2.5-075-*-^ 0.55 (0.25) CFP-20x2.5-075-* 0.55 (0.25) ORV-1715 OR^-2-214

3/4" 20x3.0 COP-20x3.0-075-*-^ 0.55 (0.25) CFP-20x3.0-075-* 0.55 (0.25) ORV-1715 OR^-2-214

3/4” 25x2.5 COP-25x2.5-075-*-^ 0.62 (0.28) CFP-25x2.5-075-* 0.62 (0.28) ORV-2315 OR^-2-214

3/4” 25x3.0 COP-25x3.0-075-*-^ 0.62 (0.28) CFP-25x3.0-075-* 0.62 (0.28) ORV-2315 OR^-2-214

3/4” 25x4.0 COP-25x4.0-075-*-^ 0.62 (0.28) CFP-25x4.0-075-* 0.62 (0.28) ORV-2315 OR^-2-214

3/4” 30x3.0 COP-30x3.0-075-*-^ 0.68 (0.31) CFP-30x3.0-075-* 0.68 (0.31) ORV-2515 OR^-2-214

1” 25x2.5 COP-25x2.5-100-*-^ 0.70 (0.32) CFP-25x2.5-100-* 0.70 (0.32) ORV-2315 OR^-2-219

1” 25x3.0 COP-25x3.0-100-*-^ 0.70 (0.32) CFP-25x3.0-100-* 0.70 (0.32) ORV-2315 OR^-2-219

1” 25x4.0 COP-25x4.0-100-*-^ 0.70 (0.32) CFP-25x4.0-100-* 0.70 (0.32) ORV-2315 OR^-2-219

1” 30x3.0 COP-30x3.0-100-*-^ 0.77 (0.35) CFP-30x3.0-100-* 0.77 (0.35) ORV-2815 OR^-2-219

1” 30x4.0 COP-30x4.0-100-*-^ 0.77 (0.35) CFP-30x4.0-100-* 0.77 (0.35) ORV-2815 OR^-2-219

1” 30x5.0 COP-30x5.0-100-*-^ 0.77 (0.35) CFP-30x5.0-100-* 0.77 (0.35) ORV-2815 OR^-2-219

1” 38x4.0 COP-38x4.0-100-*-^ 0.81 (0.37) CFP-38x4.0-100-* 0.81 (0.37) ORV-3015 OR^-2-219

1” 38x5.0 COP-38x5.0-100-*-^ 0.79 (0.36) CFP-38x5.0-100-* 0.79 (0.36) ORV-3215 OR^-2-219

1-1/4" 30x3.0 COP-30x3.0-125-*-^ 0.82 (0.37) CFP-30x3.0-125-* 0.82 (0.37) ORV-2815 OR^-2-222

1-1/4" 30x4.0 COP-30x4.0-125-*-^ 0.82 (0.37) CFP-30x4.0-125-* 0.82 (0.37) ORV-2815 OR^-2-222

1-1/4" 30x5.0 COP-30x5.0-125-*-^ 0.82 (0.37) CFP-30x5.0-125-* 0.82 (0.37) ORV-2815 OR^-2-222

1-1/4" 38x4.0 COP-38x4.0-125-*-^ 0.86 (0.39) CFP-38x4.0-125-* 0.86 (0.39) ORV-3515 OR^-2-222

1 1/4" 38x5.0 COP-38x5.0-125-*-^ 0.86 (0.39) CFP-38x5.0-125-* 0.86 (0.39) ORV-3215 OR^-2-222

1-1/4" 42x3.0 COP-42x3.0-125-*-^ 0.93 (0.42) CFP-42x3.0-125-* 0.93 (0.42) ORV-3815 OR^-2-222

1-1/4" 42x4.0 COP-42x4.0-125-*-^ 0.93 (0.42) CFP-42x4.0-125-* 0.93 (0.42) ORV-3815 OR^-2-222

COP, CFP - Cone Inserts with Pilot Port for Flare Flange Connections, Metric



Ordering Example: COP-50x3.0-200-SS-V

* Insert Material


G22TUBE-MAC.com


SAE 3000 PSI Cone Inserts with Pilot Portfor Flare Flange Connections, MetricSAE J518 Code 61 (ISO 6162-1)

Size Pipe Size



WTlbs (kg)



WTlbs (kg)

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number

1-1/2" 30x3.0 COP-30x3.0-150-*-^ 1.02 (0.46) CFP-30x3.0-150-* 1.02 (0.46) ORV-2815 OR^-2-225

1-1/2" 38x4.0 COP-38x4.0-150-*-^ 1.02 (0.46) CFP-38x4.0-150-* 1.02 (0.46) ORV-3215 OR^-2-225

1-1/2" 38x5.0 COP-38x5.0-150-*-^ 1.10 (0.50) CFP-38x5.0-150-* 1.10 (0.50) ORV-3215 OR^-2-225

1-1/2" 42x3.0 COP-42x3.0-150-*-^ 1.21 (0.55) CFP-42x3.0-150-* 1.21 (0.55) ORV-3815 OR^-2-225

1-1/2" 42x4.0 COP-42x4.0-150-*-^ 1.21 (0.55) CFP-42x4.0-150-* 1.21 (0.55) ORV-3815 OR^-2-225

1-1/2" 50x3.0 COP-50x3.0-150-*-^ 1.31 (0.59) CFP-50x3.0-150-* 1.31 (0.59) ORV-4715 OR^-2-225

1-1/2" 50x5.0 COP-50x5.0-150-*-^ 1.31 (0.59) CFP-50x5.0-150-* 1.31 (0.59) ORV-4515 OR^-2-225

1-1/2" 50x6.0 COP-50x6.0-150-*-^ 1.28 (0.58) CFP-50x6.0-150-* 1.28 (0.58) ORV-4515 OR^-2-225

2” 50x3.0 COP-50x3.0-200-*-^ 1.58 (0.72) CFP-50x3.0-200-* 1.58 (0.72) ORV-4515 OR^-2-228

2” 50x5.0 COP-50x5.0-200-*-^ 1.58 (0.72) CFP-50x5.0-200-* 1.58 (0.72) ORV-4515 OR^-2-228

2” 50x6.0 COP-50x6.0-200-*-^ 1.55 (0.70) CFP-50x6.0-200-* 1.55 (0.70) ORV-4515 OR^-2-228

2” 60x3.0 COP-60x3.0-200-*-^ 1.70 (0.77) CFP-60x3.0-200-* 1.70 (0.77) ORV-5715 OR^-2-228

2” 60x5.0 COP-60x5.0-200-*-^ 1.70 (0.77) CFP-60x5.0-200-* 1.70 (0.77) ORV-5615 OR^-2-228

2” 60x6.0 COP-60x6.0-200-*-^ 1.62 (0.73) CFP-60x6.0-200-* 1.62 (0.73) ORV-5015 OR^-2-228

2-1/2" 60x5.0 COP-60x5.0-250-*-^ 2.39 (1.08) CFP-60x5.0-250-* 2.39 (1.08) ORV-5615 OR^-2-232

2-1/2" 60x6.0 COP-60x6.0-250-*-^ 2.39 (1.08) CFP-60x6.0-250-* 2.39 (1.08) ORV-5015 OR^-2-232

2-1/2" 73x7.0 COP-73x7.0-250-*-^ 2.51 (1.14) CFP-73x7.0-250-* 2.51 (1.14) ORV-2-036 OR^-2-232

2-1/2" 75x3.0 COP-75x3.0-250-*-^ 2.60 (1.18) CFP-75x3.0-250-* 2.60 (1.18) ORV-2-037 OR^-2-232

2-1/2" 75x5.0 COP-75x5.0-250-*-^ 2.60 (1.18) CFP-75x5.0-250-* 2.60 (1.18) ORV-2-036 OR^-2-232

2-1/2" 75x7.0 COP-75x7.0-250-*-^ 2.55 (1.16) CFP-75x7.0-250-* 2.55 (1.16) ORV-6715 OR^-2-232

3” 75x5.0 COP-75x5.0-300-*-^ 3.18 (1.44) CFP-75x5.0-300-* 3.18 (1.44) ORV-2-037 OR^-2-237

3” 90x3.5 COP-90x3.5-300-*-^ 3.46 (1.57) CFP-90x3.5-300-* 3.46 (1.57) ORV-2-041 OR^-2-237

3” 90x5.0 COP-90x5.0-300-*-^ 3.40 (1.54) CFP-90x5.0-300-* 3.40 (1.54) ORV-2-040 OR^-2-237

COP, CFP - Cone Inserts with Pilot Port for Flare Flange Connections, Metric



Ordering Example: COP-50x3.0-200-SS-V

* Insert Material


TUBE-MAC.comG23


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Cone Inserts Reducer for Flare Flange Connections with O-Ring Face, NPSSAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Cone Inserts Reducer for Flare Flange Connections, NPS SAE J518 Code 61 (ISO 6162-‐1)

COR NPS Cone Inserts Reducer for Flare Flange Connections

Flange Size Pipe Size O-‐Ring Face Cone Insert

Part No. (Type COR)

WT lbs (kg)



3/4" 1/2" SCH40 COR-‐SCH40-‐075x050-‐*-‐^ 0.13 (0.06) ORV-‐1915 OR^-‐2-‐214

3/4" 1/2" SCH80 COR-‐SCH80-‐075x050-‐*-‐^ 0.09 (0.04) ORV-‐1715 OR^-‐2-‐214

1” 3/4" SCH40 COR-‐SCH40-‐100x075-‐*-‐^ 0.15 (0.07) ORV-‐2515 OR^-‐2-‐219

1” 3/4" SCH80 COR-‐SCH80-‐100x075-‐*-‐^ 0.11 (0.05) ORV-‐2315 OR^-‐2-‐219

1 1/4” 1” SCH40 COR-‐SCH40-‐125x100-‐*-‐^ 0.27 (0.12) ORV-‐3015 OR^-‐2-‐222

1 1/4" 1” SCH80 COR-‐SCH80-‐125x100-‐*-‐^ 0.21 (0.10) ORV-‐2815 OR^-‐2-‐222

1 1/2" 1 1/4” SCH40 COR-‐SCH40-‐150x125-‐*-‐^ 0.40 (0.18) ORV-‐3815 OR^-‐2-‐225

1 1/2" 1 1/4” SCH80 COR-‐SCH80-‐150x125-‐*-‐^ 0.30 (0.15) ORV-‐3815 OR^-‐2-‐225

2” 1 1/2" SCH40 COR-‐SCH40-‐200x150-‐*-‐^ 0.53 (0.24) ORV-‐4515 OR^-‐2-‐228







Ordering Example: COR-‐SCH80-‐100-‐SS-‐V

* Insert Material


DRAFT

R

Flange Size Pipe Size

O-Ring Face Cone Insert Part Number

(Type COR)

WTlbs (kg)

O-Ring 1(VITON)

Part Number

O-Ring 2(Buna)

Part Number3/4" 1/2" SCH40 COR-SCH40-075x050-*-^ 0.13 (0.06) ORV-1915 OR^-2-214

3/4" 1/2" SCH80 COR-SCH80-075x050-*-^ 0.09 (0.04) ORV-1715 OR^-2-214

1” 3/4" SCH40 COR-SCH40-100x075-*-^ 0.15 (0.07) ORV-2515 OR^-2-219

1” 3/4" SCH80 COR-SCH80-100x075-*-^ 0.11 (0.05) ORV-2315 OR^-2-219

1-1/4” 1” SCH40 COR-SCH40-125x100-*-^ 0.27 (0.12) ORV-3015 OR^-2-222

1-1/4" 1” SCH80 COR-SCH80-125x100-*-^ 0.21 (0.10) ORV-2815 OR^-2-222

1-1/2" 1-1/4” SCH40 COR-SCH40-150x125-*-^ 0.40 (0.18) ORV-3815 OR^-2-225

1-1/2" 1-1/4” SCH80 COR-SCH80-150x125-*-^ 0.30 (0.15) ORV-3815 OR^-2-225

2” 1-1/2" SCH40 COR-SCH40-200x150-*-^ 0.53 (0.24) ORV-4315 OR^-2-228

2” 1-1/2" SCH80 COR-SCH80-200x150-*-^ 0.45 (0.20) ORV-4315 OR^-2-228



3” 2-1/2" SCH40 COR-SCH40-300x250-*-^ 1.40 (0.65) ORV-2-036 OR^-2-237

3” 2-1/2" SCH80 COR-SCH80-300x250-*-^ 1.29 (0.58) ORV-2-036 OR^-2-237

* Materials:Standard, No Designation = Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.


Ordering Example: COR-SCH80-100-SS-V

* Insert Material


COR – Cone Inserts Reducer for Flare Flange Connections with O-Ring Face, NPS

G24TUBE-MAC.com


SAE 3000 PSI Cone Inserts Reducerfor Flare Flange Connections with Flat Face, NPSSAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Cone Inserts Reducer for Flare Flange Connections, NPS SAE J518 Code 61 (ISO 6162-‐1)

CFR NPS Cone Inserts Reducer for Flare Flange Connections

Flange Size Pipe Size Flat Face Cone Insert

Part No. (Type CFR)

WT lbs (kg)


3/4" 1/2" SCH40 CFR-‐SCH40-‐075x050-‐*-‐^ 0.13 (0.06) ORV-‐1915

3/4" 1/2" SCH80 CFR-‐SCH80-‐075x050-‐*-‐^ 0.09 (0.04) ORV-‐1715

1” 3/4" SCH40 CFR-‐SCH40-‐100x075-‐*-‐^ 0.15 (0.07) ORV-‐2515

1” 3/4" SCH80 CFR-‐SCH80-‐100x075-‐*-‐^ 0.11 (0.05) ORV-‐2315

1 1/4” 1” SCH40 CFR-‐SCH40-‐125x100-‐*-‐^ 0.27 (0.12) ORV-‐3015

1 1/4" 1” SCH80 CFR-‐SCH80-‐125x100-‐*-‐^ 0.21 (0.10) ORV-‐2815

1 1/2" 1 1/4” SCH40 CFR-‐SCH40-‐150x125-‐*-‐^ 0.40 (0.18) ORV-‐3815

1 1/2" 1 1/4” SCH80 CFR-‐SCH80-‐150x125-‐*-‐^ 0.30 (0.15) ORV-‐3815

2” 1 1/2" SCH40 CFR-‐SCH40-‐200x150-‐*-‐^ 0.53 (0.24) ORV-‐4515

2” 1 1/2" SCH80 CFR-‐SCH80-‐200x150-‐*-‐^ 0.45 (0.20) ORV-‐4515

2 1/2" 2” SCH40 CFR-‐SCH40-‐250x200-‐*-‐^ 0.92 (0.42) ORV-‐5715

2 1/2" 2” SCH80 CFR-‐SCH80-‐250x200-‐*-‐^ 0.49 (0.22) ORV-‐5615

3” 2 1/2" SCH40 CFR-‐SCH40-‐300x250-‐*-‐^ 1.40 (0.65) ORV-‐7015

3” 2 1/2" SCH80 CFR-‐SCH80-‐300x250-‐*-‐^ 1.29 (0.58) ORV-‐6715


Ordering Example: CFR-‐SCH80-‐100-‐SS-‐V

* Insert Material


DRAFT

R

Flange Size Pipe Size

Flat Face Cone Insert Part Number

(Type CFR)

WTlbs (kg)

O-Ring 1(VITON)

Part Number3/4" 1/2" SCH40 CFR-SCH40-075x050-*-^ 0.13 (0.06) ORV-1915

3/4" 1/2" SCH80 CFR-SCH80-075x050-*-^ 0.09 (0.04) ORV-1715

1” 3/4" SCH40 CFR-SCH40-100x075-*-^ 0.15 (0.07) ORV-2515

1” 3/4" SCH80 CFR-SCH80-100x075-*-^ 0.11 (0.05) ORV-2315

1-1/4” 1” SCH40 CFR-SCH40-125x100-*-^ 0.27 (0.12) ORV-3015

1-1/4" 1” SCH80 CFR-SCH80-125x100-*-^ 0.21 (0.10) ORV-2815

1-1/2" 1-1/4” SCH40 CFR-SCH40-150x125-*-^ 0.40 (0.18) ORV-3815

1-1/2" 1-1/4” SCH80 CFR-SCH80-150x125-*-^ 0.30 (0.15) ORV-3815

2” 1-1/2" SCH40 CFR-SCH40-200x150-*-^ 0.53 (0.24) ORV-4315

2” 1-1/2" SCH80 CFR-SCH80-200x150-*-^ 0.45 (0.20) ORV-4315

2-1/2" 2” SCH40 CFR-SCH40-250x200-*-^ 0.92 (0.42) ORV-5615

2-1/2" 2” SCH80 CFR-SCH80-250x200-*-^ 0.49 (0.22) ORV-5515

3” 2-1/2" SCH40 CFR-SCH40-300x250-*-^ 1.40 (0.65) ORV-2-036

3” 2-1/2" SCH80 CFR-SCH80-300x250-*-^ 1.29 (0.58) ORV-2-036



Ordering Example: CFR-SCH80-100-SS-V

* Insert Material


CFR – Cone Inserts Reducer for Flare Flange Connections with Flat Face, NPS

TUBE-MAC.comG25


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n


SAE 3000 PSI Retain Ring Flange DimensionsSAE J518 Code 61 (ISO 6162-1)

* SHCS Bolt SpecificationCarbon Steel: ASTM A574316 Stainless Steel: ASTM A193 B8M Class 2

SizeDimensions (in) SHCS Bolt (in)*

L (L)


1-1/2" 1.41 2.75 3.25 3.66 3.58 3.35 3.78 1.06 1/2"-13 UNC x 3.00 (2.00) 4000 (280)

2" 1.69 3.06 3.81 4.02 4.02 3.94 4.13 1.22 1/2"-13 UNC x 3.50 (2.00) 4000 (280)

2-1/2" 2.00 3.50 4.28 4.49 4.49 4.37 4.61 1.40 1/2"-13 UNC x 4.00 (2.50) 3000 (210)

3" 2.44 4.19 5.16 5.28 5.35 5.24 5.39 1.67 5/8"-11 UNC x4.50 (2.75) 3000 (210)

Retain Ring Flange Dimensions, NPS

SAE 3000 PSI Retain Ring Flange Dimensions SAE J518 Code 61 (ISO 6162-‐1)

NPS Retain Ring Flange Dimensions (Inches) * SHCS Bolt Specification Carbon Steel: ASTM A574 316 Stainless Steel: ASTM A193 B8M Class 2

Metric Retain Ring Flange Dimensions (Millimeters)


A B G H M N P E SHCS Bolt (mm)*

L (L)


1/2" 17.5 38.1 46.0 54.9 52.1 49.0 58.9 20.6 M8 x 60 (40) 5000 (350)

3/4" 22.4 47.8 52.3 65.0 61.0 55.1 68.1 20.8 M10 x 65 (40) 5000 (350)

1" 26.2 52.3 58.7 70.1 67.1 62.0 72.9 22.1 M10 x 65(40) 5000 (350)

1 1/4" 30.2 58.7 73.2 79.0 79.0 75.9 82.0 23.1 M10 x 65 (45) 4000 (280) 1 1/2" 35.8 69.9 82.6 93.0 90.9 85.1 96.0 26.9 M12 x 75 (50) 4000 (280)

2" 42.9 77.7 96.8 102.1 102.1 100.1 104.9 31.0 M12 x 90 (50) 4000 (280)

2 1/2" 50.8 88.9 108.7 114.0 114.0 111.0 117.1 35.6 M12 x 100 (65) 3000 (210) 3" 62.0 106.4 131.1 134.1 135.9 133.1 136.9 42.4 M16 x 120 (70) 3000 (210)

* SHCS Bolt Specification Carbon Steel: DIN912 / ISO4762 Grade 8.8 316 Stainless Steel: DIN912 / ISO4762 A480


A B G H M N P E SHCS Bolt (in)*

L (L)


1 1/2" 1.41 2.75 3.25 3.66 3.58 3.35 3.78 1.06 1/2"-‐13 UNC x 3.00 (2.00) 4000 (280)

2" 1.69 3.06 3.81 4.02 4.02 3.94 4.13 1.22 1/2"-‐13 UNC x 3.50 (2.00) 4000 (280) 2 1/2" 2.00 3.50 4.28 4.49 4.49 4.37 4.61 1.40 1/2"-‐13 UNC x 4.00 (2.50) 3000 (210)

3" 2.44 4.19 5.16 5.28 5.35 5.24 5.39 1.67 5/8"-‐11 UNC x4.50 (2.75) 3000 (210)

DRAFT

Retain Ring Flange Dimensions, Metric

SizeDimensions (mm) SHCS Bolt (mm)*

L (L)


1/2" 17.5 38.1 46.0 54.9 52.1 49.0 58.9 20.6 M8 x 60 (40) 5000 (350)

3/4" 22.4 47.8 52.3 65.0 61.0 55.1 68.1 20.8 M10 x 65 (40) 5000 (350)

1" 26.2 52.3 58.7 70.1 67.1 62.0 72.9 22.1 M10 x 65(40) 5000 (350)

1-1/4" 30.2 58.7 73.2 79.0 79.0 75.9 82.0 23.1 M10 x 65 (45) 4000 (280)

1-1/2" 35.8 69.9 82.6 93.0 90.9 85.1 96.0 26.9 M12 x 75 (50) 4000 (280)

2" 42.9 77.7 96.8 102.1 102.1 100.1 104.9 31.0 M12 x 90 (50) 4000 (280)

2-1/2" 50.8 88.9 108.7 114.0 114.0 111.0 117.1 35.6 M12 x 100 (65) 3000 (210)

3" 62.0 106.4 131.1 134.1 135.9 133.1 136.9 42.4 M16 x 120 (70) 3000 (210)

* SHCS Bolt SpecificationCarbon Steel: DIN912 / ISO4762 Grade 8.8316 Stainless Steel: DIN912 / ISO4762 A480

G26TUBE-MAC.com


SAE 3000 PSI Retain Ring Flangewith Clearance HolesSAE J518 Code 61 (ISO 6162-1)

Size Pipe O.D. (in) StandardPart Number


Weightlbs (kg)

1-1/2” 1-1/2” SCHXXS RFAC34-150-* 4000 (280) 1.41 (0.64)

2” 2” SCH160/XXS RFAC34-200-* 4000 (280) 2.01 (0.91)

2-1/2” 2-1/2” SCH160/XXS RFAC34-250-* 3000 (210) 3.28 (1.49)

3” 3” SCH160/XXS RFAC34-300-* 3000 (210) 5.14 (2.33)

3000 PSI Retain Ring Flange with Clearance Holes SAE J518 Code 61 (ISO 6162-‐1)

RFAC34 NPS Retain Ring Flange, Clearance

Size Pipe Size Standard Part No. Working Pressure PSI (bar)

WT lbs (kg)

1 1/2” 1 1/2” SCHXXS RFAC34-‐150-‐* 4000 (280) 1.41 (0.64) 2” 2” SCH160/XXS RFAC34-‐200-‐* 4000 (280) 2.01 (0.91)

RFC34 Metric Retain Ring Flange, Clearance

Size Pipe Size OD x Wall Standard Part No.


WT lbs (kg)

1/2” 26X6.0 RFC34-‐050-‐* 5000 (350) 0.40 (0.18) 3/4” 36X8.0 RFC34-‐075-‐* 5000 (350) 0.46 (0.21) 1” 39X7.5 RFC34-‐100-‐* 5000 (350) 0.58 (0.26)

1 1/4” 46X8.0 RFCM34-‐125-‐* 4000 (280) 0.79 (0.36) 1 1/2” 56X8.5 RFC34-‐150-‐* 4000 (280) 1.41 (0.64) 2” 66X8.5 RFC34-‐200-‐* 4000 (280) 2.01 (0.91)

2 1/2" 80X10 RFC34-‐250-‐* 3000 (210) 3.28 (1.49) 3” 97X12 RFC34-‐300-‐* 3000 (210) 5.14 (2.33)

* Materials:• Standard, No Designation = Carbon Steel, Clear Zinc Plated (Cr6 Free).• HDG = Carbon Steel, Hot Dip Galvanized.• SS = Stainless Steel, Type 316.

Ordering Example: RFAC34-‐200-‐SS

* Insert Material

DRAFT


Ordering Example: RFAC34-200-SS

* Insert Material

Size Pipe SizeOD x Wall

StandardPart Number


Weightlbs (kg)

1/2” 26X6.0 RFC34-050-* 5000 (350) 0.40 (0.18)

3/4” 36X8.0 RFC34-075-* 5000 (350) 0.46 (0.21)

1” 39X7.5 RFC34-100-* 5000 (350) 0.58 (0.26)

1-1/4” 46X8.0 RFCM34-125-* 4000 (280) 0.79 (0.36)

1-1/2” 56X8.5 RFC34-150-* 4000 (280) 1.41 (0.64)

2” 66X8.5 RFC34-200-* 4000 (280) 2.01 (0.91)

2-1/2" 80X10 RFC34-250-* 3000 (210) 3.28 (1.49)

3” 97X12 RFC34-300-* 3000 (210) 5.14 (2.33)

RFAC34 – Retain Ring Flange with Clearance Holes, for Grooved NPS Pipe Only

RFC34 – Retain Ring Flange with Clearance Holes, Metric

TUBE-MAC.comG27


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n3000 PSI Retain Ring Flange with Threaded HolesSAE J518 Code 61 (ISO 6162-1)

Size Pipe Size StandardPart Number


Weightlbs (kg)

1-1/2” 1-1/2” SCHXXS RFAT34-150-* 4000 (280) 2.15 (0.98)

2” 2” SCH160/XXS RFAT34-200-* 4000 (280) 2.65 (1.20)


Ordering Example: RFT34-200-SS

* Insert Material



Weightlbs (kg)

1/2” 26X6.0 RFT34-050-* 5000 (350) 0.44 (0.20)

3/4” 36X8.0 RFT34-075-* 5000 (350) 0.62 (0.28)

1” 39X7.5 RFT34-100-* 5000 (350) 0.75 (0.34)

1-1/4” 46X8.0 RFT34-125-* 4000 (280) 1.15 (0.52)

1-1/2” 56X8.5 RFT34-150-* 4000 (280) 2.15 (0.98)

2” 66X8.5 RFT34-200-* 4000 (280) 2.65 (1.20)

2-1/2" 80X10 RFT34-250-* 3000 (210) 3.75 (1.70)

3” 97X12 RFT34-300-* 3000 (210) 6.10 (2.77)



Weightlbs (kg)

1/2” 26X6.0 RFTM34-050-* 5000 (350) 0.44 (0.20)

3/4” 36X8.0 RFTM34-075-* 5000 (350) 0.62 (0.28)

1” 39X7.5 RFTM34-100-* 5000 (350) 0.75 (0.34)

1-1/4” 46X8.0 RFTM34-125-* 4000 (280) 1.15 (0.52)

1-1/2” 56X8.5 RFTM34-150-* 4000 (280) 2.15 (0.98)

2” 66X8.5 RFTM34-200-* 4000 (280) 2.65 (1.20)

2-1/2" 80X10 RFTM34-250-* 3000 (210) 3.75 (1.70)

3” 97X12 RFTM34-300-* 3000 (210) 6.10 (2.77)

3000 PSI Retain Ring Flange with Threaded Holes SAE J518 Code 61 (ISO 6162-‐1)

RFAT34 NPS Retain Ring Flange, Threaded, UNC


WT lbs (kg)

1 1/2” 1 1/2” SCHXXS RFAT34-‐150-‐* 4000 (280) 2.15 (0.98) 2” 2” SCH160/XXS RFAT34-‐200-‐* 4000 (280) 2.65 (1.20)

RFT34 Metric Retain Ring Flange, Threaded, UNC


WT lbs (kg)

1/2” 26X6.0 RFT34-‐050-‐* 5000 (350) 0.44 (0.20) 3/4” 36X8.0 RFT34-‐075-‐* 5000 (350) 0.62 (0.28) 1” 39X7.5 RFT34-‐100-‐* 5000 (350) 0.75 (0.34)

1 1/4” 46X8.0 RFT34-‐125-‐* 4000 (280) 1.15 (0.52) 1 1/2” 56X8.5 RFT34-‐150-‐* 4000 (280) 2.15 (0.98)

2” 66X8.5 RFT34-‐200-‐* 4000 (280) 2.65 (1.20) 2 1/2" 80X10 RFT34-‐250-‐* 3000 (210) 3.75 (1.70)

3” 97X12 RFT34-‐300-‐* 3000 (210) 6.10 (2.77)

RFTM34 Metric Retain Ring Flange, Threaded, Metric


WT lbs (kg)

1/2” 26X6.0 RFTM34-‐050-‐* 5000 (350) 0.44 (0.20) 3/4” 36X8.0 RFTM34-‐075-‐* 5000 (350) 0.62 (0.28) 1” 39X7.5 RFTM34-‐100-‐* 5000 (350) 0.75 (0.34)

1 1/4” 46X8.0 RFTM34-‐125-‐* 4000 (280) 1.15 (0.52) 1 1/2” 56X8.5 RFTM34-‐150-‐* 4000 (280) 2.15 (0.98)

2” 66X8.5 RFTM34-‐200-‐* 4000 (280) 2.65 (1.20) 2 1/2" 80X10 RFTM34-‐250-‐* 3000 (210) 3.75 (1.70)

3” 97X12 RFTM34-‐300-‐* 3000 (210) 6.10 (2.77)

* Materials:• Standard, No Designation = Carbon Steel, Clear Zinc Plated (Cr6 Free)• HDG = Carbon Steel, Hot Dip Galvanized• SS = Stainless Steel, Type 316

Ordering Example: RFT34-‐200-‐SS

* Insert Material

DRAFT THREADED HOLE

RFAT34 – Retain Ring Flange with UNC Threaded Holes, for Grooved NPS Pipe Only

RFT34 – Retain Ring Flange with UNC Threaded Holes, for Metric Pipe

RFTM34 – Retain Ring Flange with Metric Threaded Holes, for Metric Pipe

G28TUBE-MAC.com


SAE 3000 PSI Butt Weld Adapter Assembly (Bump Style) with Clearance Holes, NPSSAE J518 Code 61 (ISO 6162-1)


WT/Setlbs (kg)

Dimension (in)L

Weld Adapter Body

Part Number

FlangePart Number

1/2" 1/2” SCH80 A/BWA-SCH80-050-FC34-* 0.64 (0.29) 1.25 BWA-SCH80-050-* RFC34-050-*


1/2” 1/2” SCHXXS A/BWA-SCHXXS-050-FC34-* 0.66 (0.30) 1.25 BWA-SCHXXS-050-* RFC34-050-*

3/4” 3/4” SCH80 A/BWA-SCH80-075-FC34-* 0.92 (0.42) 1.75 BWA-SCH80-075-* RFC34-075-*


3/4” 3/4” SCHXXS A/BWA-SCHXXS-075-FC34-* 1.03 (0.48) 1.75 BWA-SCHXXS-075-* RFC34-075-*

1” 1” SCH80 A/BWA-SCH80-100-FC34-* 1.08 (0.49) 1.75 BWA-SCH80-100-* RFC34-100-*


1” 1” SCHXXS A/BWA-SCHXXS-100-FC34-* 1.23 (0.56) 1.75 BWA-SCHXXS-100-* RFC34-100-*

1-1/4” 1-1/4” SCH80 A/BWA-SCH80-125-FC34-* 1.62 (0.73) 2.00 BWA-SCH80-125-* RFCM34-125-*

1-1/4” 1-1/4” SCH160 A/BWA-SCH160-125-FC34-* 1.65 (0.75) 2.00 BWA-SCH160-125-* RFCM34-125-*

1-1/4” 1-1/4” SCHXXS A/BWA-SCHXXS-125-FC34-* 1.76 (0.80) 2.00 BWA-SCHXXS-125-* RFCM34-125-*

1-1/2” 1-1/2” SCH80 A/BWA-SCH80-150-FC34-* 2.06 (0.93) 2.25 BWA-SCH80-150-* RFC34-150-*


1-1/2” 1-1/2” SCHXXS A/BWA-SCHXXS-150-FC34-* 2.72 (1.23) 2.25 BWA-SCHXXS-150-* RFC34-150-*






2-1/2” 2-1/2” SCHXXS A/BWA-SCHXXS-250-FC34-* 5.70 (2.59) 2.63 BWA-SCHXXS-250-* RFC34-250-*




A/BWA - Butt Weld Adapter Assembly (Bump Style) with Clearance Holes, NPS


Note: To Order A Retain Ring Flange with Threaded Holes, Replace FC with FT in the Part Number

SAE 3000 PSI Butt Weld Adapter Assembly (Bump Style) with Clearance Holes, NPS SAE J518 Code 61 (ISO 6162-‐1)

A/BWA NPS Butt Weld Adapter Assembly (Bump Style) with Clearance Holes


WT/Set lbs (kg)

Dimension (in) L

Weld Adapter Body Part No.

Flange Part No.

1/2" 1/2” SCH80 A/BWA-‐SCH80-‐050-‐FC34-‐* 0.64 (0.29) 1.25 BWA-‐SCH80-‐050-‐* RFC34-‐050-‐*


1/2” 1/2” SCHXXS A/BWA-‐SCHXXS-‐050-‐FC34-‐* 0.66 (0.30) 1.25 BWA-‐SCHXXS-‐050-‐* RFC34-‐050-‐*

3/4” 3/4” SCH80 A/BWA-‐SCH80-‐075-‐FC34-‐* 0.92 (0.42) 1.75 BWA-‐SCH80-‐075-‐* RFC34-‐075-‐*



1” 1” SCH80 A/BWA-‐SCH80-‐100-‐FC34-‐* 1.08 (0.49) 1.75 BWA-‐SCH80-‐100-‐* RFC34-‐100-‐*


1” 1” SCHXXS A/BWA-‐SCHXXS-‐100-‐FC34-‐* 1.23 (0.56) 1.75 BWA-‐SCHXXS-‐100-‐* RFC34-‐100-‐*

1 1/4” 1 1/4” SCH80 A/BWA-‐SCH80-‐125-‐FC34-‐* 1.62 (0.73) 2.00 BWA-‐SCH80-‐125-‐* RFC34-‐125-‐*


1 1/4” 1 1/4” SCHXXS A/BWA-‐SCHXXS-‐125-‐FC34-‐* 1.76 (0.80) 2.00 BWA-‐SCHXXS-‐125-‐* RFC34-‐125-‐*













* Materials:• Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).• SS = All Stainless Steel, Type 316.• ZSS = Carbon Steel Flange with Stainless Steel Adapter Body, Type 316.• HDGSS = Carbon Steel, Hot Dip Galvanized Flange with Stainless Steel Adapter Body, Type 316.

Note: To Order A Retain Ring Flange with Threaded Holes, Replace FC with FT in the Part Number.

Ordering Example: A/BWA-‐SCH80-‐200-‐FC34-‐SS

* Insert Material

Complete Flange Set Includes: • One (1) Retain Ring Flange• One (1) Weld Adapter Body

To be Ordered Separately: • Bolt Kit (See Page)• O-‐Ring Spacer (See Page)

DRAFT Complete Flange Set Includes:• One (1) Retain Ring Flange• One (1) Weld Adapter Body

To be Ordered Separately:• Bolt Kit (See Page G25)• O-Ring Spacer (See Page G80)

Ordering Example: A/BWA-SCH80-200-FC34-SS

* Insert Material

TUBE-MAC.comG29


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Butt Weld Adapter Assembly (Bump Style) with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)


Complete Flange SetPart Number

WT/Setlbs (kg)

Dimension (in)L

Weld Adapter Body Part Number

FlangePart Number

1/2" 12.0X1.5 A/BWA-12.0X1.5-050-FC34-* 0.65 (0.29) 38.1 BWA-12.0X1.5-050-* RFC34-050-*


1/2” 16.0X2.5 A/BWA-16.0X2.5-050-FC34-* 0.65 (0.29) 38.1 BWA-16.0X2.5-050-* RFC34-050-*





1/2” 21.3X2.8 A/BWA-SCH40-050-FC34-* 0.63 (0.29) 31.8 BWA-SCH40-050-* RFC34-050-*



1/2” 21.3X7.5 A/BWA-SCHXXS-050-FC34-* 0.66 (0.30) 31.8 BWA-SCHXXS-050-* RFC34-050-*










3/4" 26.7X2.9 A/BWA-SCH40-075-FC34-* 0.90 (0.41) 44.5 BWA-SCH40-075-* RFC34-075-*



3/4" 26.7X7.8 A/BWA-SCHXXS-075-FC34-* 1.03 (0.47) 44.5 BWA-SCHXXS-075-* RFC34-075-*

3/4" 30.0X.3.0 A/BWA-30.0X3.0-075-FC34-* 0.85 (0.39) 44.5 BWA-30.0X3.0-075-* RFC34-075-*

3/4" 30.0X.4.0 A/BWA-30.0X4.0-075-FC34-* 0.88 (0.40) 44.5 BWA-30.0X4.0-075-* RFC34-075-*


A/BWA - Butt Weld Adapter Assembly (Bump Style) with Clearance Holes, Metric



Complete Flange Set Includes:• One (1) Retain Ring Flange• One (1) Weld Adapter Body


Ordering Example: A/BWA-50.0X3.0-200-FC34-SS

* Insert Material




WT/Set lbs (kg)

Dimension (in) L


Flange Part No.




























* Insert Material



DRAFT

G30TUBE-MAC.com


SAE 3000 PSI Butt Weld Adapter Assembly (Bump Style) with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)



WT/Setlbs (kg)

Dimension (in)L


FlangePart Number

1" 25.0X2.5 A/BWA-25.0X2.5-100-FC34-* 1.06 (0.48) 44.5 BWA-25.0X2.5-100-* RFC34-100-*

1” 25.0X3.0 A/BWA-25.0X3.0-100-FC34-* 1.06 (0.48) 44.5 BWA-25.0X3.0-100-* RFC34-100-*





1” 33.4X3.4 A/BWA-SCH40-100-FC34-* 1.08 (0.49) 44.5 BWA-SCH40-100-* RFC34-100-*



1” 33.4X9.1 A/BWA-SCHXXS-100-FC34-* 1.23 (0.56) 44.5 BWA-SCHXXS-100-* RFC34-100-*





1-1/4" 30.0X3.0 A/BWA-30.0X3.0-125-FCM34-* 1.60 (0.73) 50.8 BWA-30.0X3.0-125-* RFCM34-125-*








1-1/4" 42.2X3.6 A/BWA-SCH40-125-FCM34-* 1.61 (0.73) 50.8 BWA-SCH40-125-* RFCM34-125-*



1-1/4" 42.2X9.7 A/BWA-SCHXXS-125-FCM34-* 1.76 (0.80) 50.8 BWA-SCHXXS-125-* RFCM34-125-*








* Insert Material




WT/Set lbs (kg)

Dimension (in) L


Flange Part No.




























* Insert Material



DRAFT

TUBE-MAC.comG31


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Butt Weld Adapter Assembly (Bump Style) with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)



WT/Setlbs (kg)

Dimension (in)L


FlangePart Number

1-1/2" 30.0X3.0 A/BWA-30.0X3.0-150-FC34-* 2.45 (1.11) 57.2 BWA-30.0X3.0-150-* RFC34-150-*



1-1/2” 38.0X6.0 A/BWA-38.0X6.0-150-FC34-* 2.48 (1.12) 57.2 BWA-38.0X6.0-150-* RFC34-150-*



1-1/2” 48.3X3.7 A/BWA-SCH40-150-FC34-* 2.45 (1.11) 57.2 BWA-SCH40-150-* RFC34-150-*

1-1/2" 48.3X5.1 A/BWA-SCH80-150-FC34-* 2.38 (1.08) 57.2 BWA-SCH80-150-* RFC34-150-*


1-1/2" 48.3X10.2 A/BWA-SCHXXS-150-FC34-* 2.64 (1.20) 57.2 BWA-SCHXXS-150-* RFC34-150-*






















* Insert Material




WT/Set lbs (kg)

Dimension (in) L


Flange Part No.




























* Insert Material



DRAFT

G32TUBE-MAC.com


SAE 3000 PSI Butt Weld Adapter Assembly (Bump Style) with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)



WT/Setlbs (kg)

Dimension (in)L


FlangePart Number







2-1/2" 73.0X14.0 A/BWA-SCHXXS-250-FC34-* 5.49 (2.49) 66.7 BWA-SCHXXS-250-* RFC34-250-*

2-1/2" 75.0X.5.0 A/BWA-75.0X.5.0-250-FC34-* 4.41 (2.00) 66.7 BWA-75.0X.5.0-250-* RFC34-250-*











3” 90.0X3.5 A/BWA-90X3.5-300-FC34-* 7.45 (3.38) 69.9 BWA-90X3.5-300-* RFC34-300-*

3” 90.0X5.0 A/BWA-90X5.0-300-FC34-* 7.60 (3.45) 69.9 BWA-90X5.0-300-* RFC34-300-*








* Insert Material




WT/Set lbs (kg)

Dimension (in) L


Flange Part No.




























* Insert Material



DRAFT

TUBE-MAC.comG33


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n


WT/Setlbs (kg)

Dimension (in) L


FlangePart Number

Retain Ring(Stainless

Steel)Part Number

1/2" 1/2” SCH80 A/BWAR-SCH80-050-FC34-* 0.64 (0.29) 1.25 BWAR-SCH80-050-* RFC34-050-* R-050


1/2” 1/2” SCHXXS A/BWAR-SCHXXS-050-FC34-* 0.66 (0.30) 1.25 BWAR-SCHXXS-050-* RFC34-050-* R-050

3/4” 3/4” SCH80 A/BWAR-SCH80-075-FC34-* 0.92 (0.42) 1.75 BWAR-SCH80-075-* RFC34-075-* R-075


3/4” 3/4” SCHXXS A/BWAR-SCHXXS-075-FC34-* 1.03 (0.48) 1.75 BWAR-SCHXXS-075-* RFC34-075-* R-075

1” 1” SCH80 A/BWAR-SCH80-100-FC34-* 1.08 (0.49) 1.75 BWAR-SCH80-100-* RFC34-100-* R-100


1” 1” SCHXXS A/BWAR-SCHXXS-100-FC34-* 1.23 (0.56) 1.75 BWAR-SCHXXS-100-* RFC34-100-* R-100

1-1/4” 1-1/4” SCH80 A/BWAR-SCH80-125-FC34-* 1.62 (0.73) 2.00 BWAR-SCH80-125-* RFCM34-125-* R-125

1-1/4” 1-1/4” SCH160 A/BWAR-SCH160-125-FC34-* 1.65 (0.75) 2.00 BWAR-SCH160-125-* RFCM34-125-* R-125

1-1/4” 1-1/4” SCHXXS A/BWAR-SCHXXS-125-FC34-* 1.76 (0.80) 2.00 BWAR-SCHXXS-125-* RFCM34-125-* R-125

1-1/2” 1-1/2” SCH80 A/BWAR-SCH80-150-FC34-* 2.06 (0.93) 2.25 BWAR-SCH80-150-* RFC34-150-* R-150


1-1/2” 1-1/2” SCHXXS A/BWAR-SCHXXS-150-FC34-* 2.72 (1.23) 2.25 BWAR-SCHXXS-150-* RFC34-150-* R-150






2 -1/2” 2-1/2” SCHXXS A/BWAR-SCHXXS-250-FC34-* 5.70 (2.59) 2.63 BWAR-SCHXXS-250-* RFC34-250-* R-250




A/BWAR - Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, NPS



Ordering Example: A/BWAR-SCH80-200-FC34-SS

* Insert Material

SAE 3000 PSI Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, NPSSAE J518 Code 61 (ISO 6162-1)

Complete Flange Set Includes:• One (1) Retain Ring Flange• One (1) Weld Adapter Body• One (1) Retain Ring


SAE 3000 PSI Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, Metric SAE J518 Code 61 (ISO 6162-‐1)

A/BWAR Metric Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes

Size Pipe Size OD x Wall

Complete Flange Set Part No.

WT/Set lbs (kg)

Dimension (mm) L


Flange Part No.

Retain Ring (Stainless Steel)

Part No.

1/2" 12.0X1.5 A/BWAR-‐12.0X1.5-‐050-‐FC34-‐* 0.65 (0.29) 38.1 BWAR-‐12.0X1.5-‐050-‐* RFC34-‐050-‐* R-‐050


1/2” 16.0X2.5 A/BWAR-‐16.0X2.5-‐050-‐FC34-‐* 0.65 (0.29) 38.1 BWAR-‐16.0X2.5-‐050-‐* RFC34-‐050-‐* R-‐050





1/2” 21.3X2.8 A/BWAR-‐SCH40-‐050-‐FC34-‐* 0.63 (0.29) 31.8 BWAR-‐SCH40-‐050-‐* RFC34-‐050-‐* R-‐050



1/2” 21.3X7.5 A/BWAR-‐SCHXXS-‐050-‐FC34-‐* 0.66 (0.30) 31.8 BWAR-‐SCHXXS-‐050-‐* RFC34-‐050-‐* R-‐050










3/4" 26.7X2.9 A/BWAR-‐SCH40-‐075-‐FC34-‐* 0.90 (0.41) 44.5 BWAR-‐SCH40-‐075-‐* RFC34-‐075-‐* R-‐075



3/4" 26.7X7.8 A/BWAR-‐SCHXXS-‐075-‐FC34-‐* 1.03 (0.47) 44.5 BWAR-‐SCHXXS-‐075-‐* RFC34-‐075-‐* R-‐075

3/4" 30.0X.3.0 A/BWAR-‐30.0X3.0-‐075-‐FC34-‐* 0.85 (0.39) 44.5 BWAR-‐30.0X3.0-‐075-‐* RFC34-‐075-‐* R-‐075



1" 25.0X2.5 A/BWAR-‐25.0X2.5-‐100-‐FC34-‐* 1.06 (0.48) 44.5 BWAR-‐25.0X2.5-‐100-‐* RFC34-‐100-‐* R-‐100

1” 25.0X3.0 A/BWAR-‐25.0X3.0-‐100-‐FC34-‐* 1.06 (0.48) 44.5 BWAR-‐25.0X3.0-‐100-‐* RFC34-‐100-‐* R-‐100





1” 33.4X3.4 A/BWAR-‐SCH40-‐100-‐FC34-‐* 1.08 (0.49) 44.5 BWAR-‐SCH40-‐100-‐* RFC34-‐100-‐* R-‐100



1” 33.4X9.1 A/BWAR-‐SCHXXS-‐100-‐FC34-‐* 1.23 (0.56) 44.5 BWAR-‐SCHXXS-‐100-‐* RFC34-‐100-‐* R-‐100





* Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).• SS = All Stainless Steel, Type 316.• ZSS = Carbon Steel Flange with Stainless Steel Adapter Body, Type 316.• HDGSS = Carbon Steel, Hot Dip Galvanized Flange with Stainless Steel Adapter Body, Type 316.

Note: To Order A Retain Ring Flange with Threaded Holes, Replace FC with FTM in the Part Number.

Ordering Example: A/BWAR-‐50.0X3.0-‐200-‐FC34-‐SS

* Insert Material

Complete Flange Set Includes: • One (1) Retain Ring Flange • One (1) Weld Adapter Body • One (1) Retain Ring

To be Ordered Separately: • Bolt Kit (See Page)• O-‐Ring Spacer (See Page)DRAFT

G34TUBE-MAC.com


SAE 3000 PSI Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)



WT/Setlbs (kg)

Dimension (mm)

L


FlangePart Number


Steel)Part Number

1/2" 12.0X1.5 A/BWAR-12.0X1.5-050-FC34-* 0.65 (0.29) 38.1 BWAR-12.0X1.5-050-* RFC34-050-* R-050


1/2” 16.0X2.5 A/BWAR-16.0X2.5-050-FC34-* 0.65 (0.29) 38.1 BWAR-16.0X2.5-050-* RFC34-050-* R-050





1/2” 21.3X2.8 A/BWAR-SCH40-050-FC34-* 0.63 (0.29) 31.8 BWAR-SCH40-050-* RFC34-050-* R-050



1/2” 21.3X7.5 A/BWAR-SCHXXS-050-FC34-* 0.66 (0.30) 31.8 BWAR-SCHXXS-050-* RFC34-050-* R-050










3/4" 26.7X2.9 A/BWAR-SCH40-075-FC34-* 0.90 (0.41) 44.5 BWAR-SCH40-075-* RFC34-075-* R-075



3/4" 26.7X7.8 A/BWAR-SCHXXS-075-FC34-* 1.03 (0.47) 44.5 BWAR-SCHXXS-075-* RFC34-075-* R-075

3/4" 30.0X.3.0 A/BWAR-30.0X3.0-075-FC34-* 0.85 (0.39) 44.5 BWAR-30.0X3.0-075-* RFC34-075-* R-075

3/4" 30.0X.4.0 A/BWAR-30.0X4.0-075-FC34-* 0.88 (0.40) 44.5 BWAR-30.0X4.0-075-* RFC34-075-* R-075


A/BWAR - Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, Metric







WT/Set lbs (kg)

Dimension (mm) L


Flange Part No.


Part No.













































* Insert Material





Ordering Example: A/BWAR-50.0X3.0-200-FC34-SS

* Insert Material

TUBE-MAC.comG35


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n



WT/Setlbs (kg)

Dimension (mm) L


FlangePart Number


Steel)Part Number

1" 25.0X2.5 A/BWAR-25.0X2.5-100-FC34-* 1.06 (0.48) 44.5 BWAR-25.0X2.5-100-* RFC34-100-* R-100

1” 25.0X3.0 A/BWAR-25.0X3.0-100-FC34-* 1.06 (0.48) 44.5 BWAR-25.0X3.0-100-* RFC34-100-* R-100





1” 33.4X3.4 A/BWAR-SCH40-100-FC34-* 1.08 (0.49) 44.5 BWAR-SCH40-100-* RFC34-100-* R-100



1” 33.4X9.1 A/BWAR-SCHXXS-100-FC34-* 1.23 (0.56) 44.5 BWAR-SCHXXS-100-* RFC34-100-* R-100





1-1/4" 30.0X3.0 A/BWAR-30.0X3.0-125-FCM34-* 1.60 (0.73) 50.8 BWAR-30.0X3.0-125-* RFCM34-125-* R-125








1-1/4" 42.2X3.6 A/BWAR-SCH40-125-FCM34-* 1.61 (0.73) 50.8 BWAR-SCH40-125-* RFCM34-125-* R-125



1-1/4" 42.2X9.7 A/BWAR-SCHXXS-125-FCM34-* 1.76 (0.80) 50.8 BWAR-SCHXXS-125-* RFCM34-125-* R-125








* Insert Material

SAE 3000 PSI Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)SAE 3000 PSI Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, Metric

SAE J518 Code 61 (ISO 6162-‐1)




WT/Set lbs (kg)

Dimension (mm) L


Flange Part No.


Part No.













































* Insert Material



G36TUBE-MAC.com




WT/Setlbs (kg)

Dimension (mm)

L


FlangePart Number


Steel)Part Number

1-1/2" 30.0X3.0 A/BWAR-30.0X3.0-150-FC34-* 2.45 (1.11) 57.2 BWAR-30.0X3.0-150-* RFC34-150-* R-150






1-1/2" 48.3X3.7 A/BWAR-SCH40-150-FC34-* 2.45 (1.11) 57.2 BWAR-SCH40-150-* RFC34-150-* R-150



1-1/2" 48.3X10.2 A/BWAR-SCHXXS-150-FC34-* 2.64 (1.20) 57.2 BWAR-SCHXXS-150-* RFC34-150-* R-150




















* Insert Material

SAE 3000 PSI Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)







WT/Set lbs (kg)

Dimension (mm) L


Flange Part No.


Part No.













































* Insert Material



TUBE-MAC.comG37


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n



WT/Setlbs (kg)

Dimension (mm)

L


FlangePart Number


Steel)Part Number







2-1/2" 73.0X14.0 A/BWAR-SCHXXS-250-FC34-* 5.49 (2.49) 66.7 BWAR-SCHXXS-250-* RFC34-250-* R-250

2-1/2" 75.0X.5.0 A/BWAR-75.0X.5.0-250-FC34-* 4.41 (2.00) 66.7 BWAR-75.0X.5.0-250-* RFC34-250-* R-250











3” 90.0X3.5 A/BWAR-90X3.5-300-FC34-* 7.45 (3.38) 69.9 BWAR-90X3.5-300-* RFC34-300-* R-300

3” 90.0X5.0 A/BWAR-90X5.0-300-FC34-* 7.60 (3.45) 69.9 BWAR-90X5.0-300-* RFC34-300-* R-300






* Insert Material



SAE 3000 PSI Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, MetricSAE J518 Code 61 (ISO 6162-1)SAE 3000 PSI Butt Weld Adapter Assembly Retain Ring Style with Clearance Holes, Metric

SAE J518 Code 61 (ISO 6162-‐1)




WT/Set lbs (kg)

Dimension (mm) L


Flange Part No.


Part No.













































* Insert Material



G38TUBE-MAC.com


SAE 3000 PSI BSPP Female Thread Adapter Complete AssemblySAE J518 Code 61 (ISO 6162-1)

Size(flange x thread)

Complete AssemblyPart Number

Dimensionsin (mm)

ThreadSize O-Ring (Buna

Part Number

AssemblyWT

lbs (kg)

Body OnlyPart Number

Body OnlyWT

lbs (kg)L R

1/2”x 1/4” A/FBTA-050x025-FC34-*-^ 1.38 (35.0) 1/4" OR^-3-909 1.05 (0.48) FBTA-050x025-*-^ 0.64 (0.29)

1/2" x 1/2" A/FBTA-050x050-FC34-*-^ 2.50 (63.5) 1/2" OR^-3-909 1.51 (0.69) FBTA-050x050-*-^ 1.10 (0.50)

3/4”x 1/2" A/FBTA-075x050-FC34-*-^ 1.57 (40.0) 1/2" OR^-3-913 1.43 (0.65) FBTA-075x050-*-^ 0.95 (0.43)

3/4" x 3/4" A/FBTA-075x075-FC34-*-^ 2.88 (73.0) 3/4" OR^-3-913 2.13 (0.97) FBTA-075x075-*-^ 1.65 (0.75)

1”x 3/4" A/FBTA-100x075-FC34-*-^ 1.57 (40.0) 3/4" OR^-3-916 1.67 (0.76) FBTA-100x075-*-^ 1.06 (0.48)

1” x 1” A/FBTA-100x100-FC34-*-^ 3.75 (95.3) 1" OR^-3-916 2.41 (1.10) FBTA-100x100-*-^ 1.80 (0.82)

1-1/4”x 1” A/FBTA-125x100-FC34-*-^ 1.65 (42.0) 1” OR^-3-918 2.30 (1.05) FBTA-125x100-*-^ 1.47 (0.67)

1-1/4" x 1-1/4" A/FBTA-125x125-FC34-*-^ 3.88 (98.6) 1-1/4” OR^-3-918 3.33 (1.51) FBTA-125x125-*-^ 2.50 (1.14)

1-1/2”x 1-1/4" A/FBTA-150x125-FC34-*-^ 1.77 (45.0) 1-1/4" OR^-3-924 3.77 (1.71) FBTA-150x125-*-^ 2.31 (1.05)

1-1/2" x 1-1/2" A/FBTA-150x150-FC34-*-^ 4.00 (101.6) 1-1/2" OR^-3-924 5.51 (2.50) FBTA-150x150-*-^ 4.05 (1.84)

2”x 1-1/2" A/FBTA-200x150-FC34-*-^ 2.16 (55.0) 1-1/2" OR^-3-928 5.74 (2.61) FBTA-200x150-*-^ 3.67 (1.67)

2” X 2” A/FBTA-200x200-FC34-*-^ 4.50 (114.3) 2" OR^-3-928 8.52 (3.87) FBTA-200x200-*-^ 6.45 (2.93)

SAE 3000 PSI BSPP Female Thread Adapter Complete Assembly SAE J518 Code 61 (ISO 6162-‐1)

A/FBTA Female Thread Adapter, BSPP – Complete Assembly Complete with Buna O -‐ Ring

Dimensions in (mm)

Thread Size

Size (flange x thread)

Complete Assembly Part No.

L R

O-‐Ring (Buna) Part No.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

1/2”x 1/4” A/FBTA-‐050x025-‐FC34-‐*-‐^ 2.50 (63.5) 1/4" OR^-‐3-‐909 0.95 (0.43) FBTA-‐050x050-‐*-‐^ 0.52 (0.24) 3/4”x 1/2" A/FBTA-‐075x050-‐FC34-‐*-‐^ 2.88 (73.0) 1/2" OR^-‐3-‐913 1.42 (0.64) FBTA-‐075x075-‐*-‐^ 0.97 (0.44) 1”x 3/4" A/FBTA-‐100x075-‐FC34-‐*-‐^ 3.75 (95.3) 3/4" OR^-‐3-‐916 2.95 (1.34) FBTA-‐100x100-‐*-‐^ 2.34 (1.06) 1 1/4”x 1” A/FBTA-‐125x100-‐FC34-‐*-‐^ 3.88 (98.6) 1” OR^-‐3-‐918 3.22 (1.46) FBTA-‐125x125-‐*-‐^ 2.28 (1.03)

1 1/2”x 1 1/4" A/FBTA-‐150x125-‐FC34-‐*-‐^ 4.00 (101.6) 1 1/4" OR^-‐3-‐924 4.26 (1.93) FBTA-‐150x150-‐*-‐^ 2.83 (1.28) 2”x 1 1/2" A/FBTA-‐200x150-‐FC34-‐*-‐^ 4.25 (108.0) 1 1/2" OR^-‐3-‐928 5.72 (2.59) FBTA-‐200x200-‐*-‐^ 3.67 (1.66)

Flange Option: • Standard, FC34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Clearance Flange. • FT34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) UNC Threaded Flange. • FTM34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Metric Threaded Flange. * Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = All Stainless Steel, Type 316. ^ O-‐Ring Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Complete Flange Set Includes: • One (1) Female Thread Adapter • One (1) Retain Ring Flange • One (1) Retain Ring • One (1) Face O-‐Ring (O-‐Ring 1)



Ordering Example: A/FBTA-‐200x200-‐FC34-‐SS-‐V

Flange Option

* Insert Material

^ Insert O-‐Ring Type

DRAFT Complete Flange Set Includes:• One (1) Female Thread Adapter• One (1) Retain Ring Flange• One (1) Retain Ring• One (1) Face O-Ring (O-Ring 1)


Flange Option:Standard, FC34 = SAE 3000 PSI Code 61 (ISO 6162-1) Clearance Flange.FT34 = SAE 3000 PSI Code 61 (ISO 6162-1) UNC Threaded Flange.FTM34 = SAE 3000 PSI Code 61 (ISO 6162-1) Metric Threaded Flange.


^ O-Ring Type:Standard, No Designation = Buna Nitrile.V = Viton.

Ordering Example: A/FBTA-200x150-FC34-SS-V

Flange Option

* Insert Material

^ Insert O-Ring Type

A/FBTA - BSPP Female Thread Adapter Complete Assembly

TUBE-MAC.comG39


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI SAE Male Thread Adapter Complete AssemblySAE J518 Code 61 (ISO 6162-1)



Dimensionsin (mm)

Thread SizeUNF/

UN-2A

O-Ring 1 (Buna)

Part Number

O-Ring 2 (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)L

1/2”x 3/8” A/STA-050x038-FC34-*-^ 2.63 (66.80) 9/16”-18 OR^-3-909 OR^-3-906 0.96 (0.44) STA-050x038-* 0.50 (0.23)



1/2”x 3/4” A/STA-050x075-FC34-*-^ 2.63 (66.80) 1-1/16”-12 OR^-3-909 OR^-3-912 1.12 (0.50) STA-050x075-* 0.66 (0.30)


3/4”x 3/4” A/STA-075x075-FC34-*-^ 2.75 (69.85) 1-1/16”-12 OR^-3-913 OR^-3-912 1.57 (0.71) STA-075x075-* 1.07 (0.49)

3/4”x 1” A/STA-075x100-FC34-*-^ 2.75 (69.85) 1-5/16”-12 OR^-3-913 OR^-3-916 1.78 (0.81) STA-075x100-* 1.15 (0.52)

1”x 3/4” A/STA-100x075-FC34-*-^ 3.00 (76.20) 1-1/16”-12 OR^-3-916 OR^-3-912 1.88 (0.85) STA-100x075-* 1.25 (0.57)

1”x 1” A/STA-100x100-FC34-*-^ 3.00 (76.20) 1-5/16”-12 OR^-3-916 OR^-3-916 1.93 (0.88) STA-100x100-* 1.30 (0.59)

1”x 1-1/4” A/STA-100x125-FC34-*-^ 3.00 (76.20) 1-5/8”-12 OR^-3-916 OR^-3-920 2.12 (0.96) STA-100x125-* 1.49 (0.68)

1-1/4”x 1” A/STA-125x100-FC34-*-^ 3.25 (82.55) 1-5/16”-12 OR^-3-918 OR^-3-916 2.65 (1.20) STA-125x100-* 1.75 (0.79)

1-1/4”x 1-1/4” A/STA-125x125-FC34-*-^ 3.25 (82.55) 1-5/8”-12 OR^-3-918 OR^-3-920 2.72 (1.23) STA-125x125-* 1.82 (0.83)




1-1/2” x 2” A/STA-150x200-FC34-*-^ 4.25 (107.95) 2-1/2”-12 OR^-3-924 OR^-3-932 4.89 (2.22) STA-150x200-* 3.54 (1.61)

2”x 1-1/2” A/STA-200x150-FC34-*-^ 4.38 (111.25) 1-7/8”-12 OR^-3-928 OR^-3-924 5.78 (2.62) STA-200x150-* 3.76 (1.71)

2”x 2” A/STA-200x200-FC34-*-^ 4.38 (111.25) 2-1/2”-12 OR^-3-928 OR^-3-932 5.98 (2.71) STA-200x200-* 3.96 (1.80)

A/STA – SAE Male Thread Adapter Complete Assembly

SAE 3000 PSI SAE Male Thread Adapter Complete Assembly SAE J518 Code 61 (ISO 6162-‐1)

A/STA – SAE Male Thread Adapter Complete Assembly

Dimensions in (mm) Size (flange x

thread) Complete Assembly

Part No. L

Thread Size UNF/UN-‐2A



Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

1/2”x 3/8” A/STA-‐050x038-‐FC34-‐*-‐^ 3.10 (78.7) 9/16”-‐18 OR^-‐3-‐909 OR^-‐3-‐906 0.96 (0.44) STA-‐050x038-‐* 0.50 (0.23) 1/2”x 1/2” A/STA-‐050x050-‐FC34-‐*-‐^ 3.18 (80.8) 3/4”-‐16 OR^-‐3-‐909 OR^-‐3-‐908 0.94 (0.43) STA-‐050x050-‐* 0.52 (0.24)

1/2”x 5/8” A/STA-‐050x063-‐FC34-‐*-‐^ 3.26 (82.8) 7/8”-‐14 OR^-‐3-‐909 OR^-‐3-‐910 1.00 (0.45) STA-‐050x063-‐* 0.57 (0.26) 1/2”x 3/4” A/STA-‐050x075-‐FC34-‐*-‐^ 3.35 (85.1) 1 1/16”-‐12 OR^-‐3-‐909 OR^-‐3-‐912 1.12 (0.50) STA-‐050x075-‐* 0.66 (0.30) 3/4”x 1/2” A/STA-‐075x050-‐FC34-‐*-‐^ 3.30 (83.8) 3/4”-‐16 OR^-‐3-‐913 OR^-‐3-‐908 1.50 (0.68) STA-‐075x050-‐* 1.00 (0.45) 3/4”x 3/4” A/STA-‐075x075-‐FC34-‐*-‐^ 3.48 (88.4) 1 1/16”-‐12 OR^-‐3-‐913 OR^-‐3-‐912 1.57 (0.71) STA-‐075x075-‐* 1.07 (0.49) 3/4”x 1” A/STA-‐075x100-‐FC34-‐*-‐^ 3.48 (88.4) 1 5/16”-‐12 OR^-‐3-‐913 OR^-‐3-‐916 1.78 (0.81) STA-‐075x100-‐* 1.15 (0.52) 1”x 3/4” A/STA-‐100x075-‐FC34-‐*-‐^ 3.73 (94.7) 1 1/16”-‐12 OR^-‐3-‐916 OR^-‐3-‐912 1.88 (0.85) STA-‐100x075-‐* 1.25 (0.57) 1”x 1” A/STA-‐100x100-‐FC34-‐*-‐^ 3.73 (94.7) 1 5/16”-‐12 OR^-‐3-‐916 OR^-‐3-‐916 1.93 (0.88) STA-‐100x100-‐* 1.30 (0.59)

1”x 1 1/4” A/STA-‐100x125-‐FC34-‐*-‐^ 3.73 (94.7) 1 5/8”-‐12 OR^-‐3-‐916 OR^-‐3-‐920 2.12 (0.96) STA-‐100x125-‐* 1.49 (0.68) 1 1/4”x 1” A/STA-‐125x100-‐FC34-‐*-‐^ 3.98 (101.1) 1 5/16”-‐12 OR^-‐3-‐918 OR^-‐3-‐916 2.65 (1.20) STA-‐125x100-‐* 1.75 (0.79)

1 1/4”x 1 1/4” A/STA-‐125x125-‐FC34-‐*-‐^ 3.98 (101.1) 1 5/8”-‐12 OR^-‐3-‐918 OR^-‐3-‐920 2.72 (1.23) STA-‐125x125-‐* 1.82 (0.83) 1 1/4”x 1 1/2” A/STA-‐125x150-‐FC34-‐*-‐^ 3.98 (101.1) 1 7/8”-‐12 OR^-‐3-‐918 OR^-‐3-‐924 2.93 (1.33) STA-‐125x150-‐* 2.03 (0.92) 1 1/2”x 1 1/4” A/STA-‐150x125-‐FC34-‐*-‐^ 4.98 (126.5) 1 5/8”-‐12 OR^-‐3-‐924 OR^-‐3-‐920 3.84 (1.74) STA-‐150x125-‐* 2.94 (1.33) 1 1/2”x 1 1/2” A/STA-‐150x150-‐FC34-‐*-‐^ 4.98 (126.5) 1 7/8”-‐12 OR^-‐3-‐924 OR^-‐3-‐924 4.32 (1.96) STA-‐150x150-‐* 2.97 (1.35) 1 1/2” x 2” A/STA-‐150x200-‐FC34-‐*-‐^ 4.98 (126.5) 2 1/2”-‐12 OR^-‐3-‐924 OR^-‐3-‐932 4.89 (2.22) STA-‐150x200-‐* 3.54 (1.61) 2”x 1 1/2” A/STA-‐200x150-‐FC34-‐*-‐^ 4.98 (126.5) 1 7/8”-‐12 OR^-‐3-‐928 OR^-‐3-‐924 5.78 (2.62) STA-‐200x150-‐* 3.76 (1.71) 2”x 2” A/STA-‐200x200-‐FC34-‐*-‐^ 4.98 (126.5) 2 1/2”-‐12 OR^-‐3-‐928 OR^-‐3-‐932 5.98 (2.71) STA-‐200x200-‐* 3.96 (1.80)

Flange Option: • Standard, FC34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Clearance Flange. • FT34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) UNC Threaded Flange. • FTM34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Metric Threaded Flange. * Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = Stainless Steel, Type 316. Body Only • SSA = Stainless Steel, Type 316. All SS including flange ^ O-‐Ring Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Ordering Example: A/STA-‐200x150-‐FC34-‐SS-‐V

Flange Option

* Insert Material


Complete Flange Set Includes: • One (1) Male Thread Adapter • One (1) Retain Ring Flange • One (1) Retain Ring • One (1) Face O-‐Ring (O-‐Ring 1) • One (1) Thread O-‐Ring (O-‐Ring 2)



DRAFT Complete Flange Set Includes:• One (1) Male Thread Adapter• One (1) Retain Ring Flange• One (1) Retain Ring• One (1) Face O-Ring (O-Ring 1)• One (1) Thread O-Ring (O-Ring 2)





Ordering Example: A/STA-200x150-FC34-SS-V

Flange Option

* Insert Material


G40TUBE-MAC.com


SAE 3000 PSI NPT Male Thread Adapter Complete AssemblySAE J518 Code 61 (ISO 6162-1)



Dimensionsin (mm)

NPTFThread

(Dryseal)

O-Ring(Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)L

1/2”x 1/2” A/NTA-050x050-FC34-*-^ 2.88 (73.15) 1/2”-14 OR^-3-909 1.07 (0.49) NTA-050x050-* 0.57 (0.26)

1/2”x 3/4” A/NTA-050x075-FC34-*-^ 2.86 (72.64) 3/4”-14 OR^-3-909 1.24 (0.56) NTA-050x075-* 0.74 (0.34)

3/4”x 1/2” A/NTA-075x050-FC34-*-^ 3.00 (76.2) 1/2”-14 OR^-3-913 1.57 (0.71) NTA-075x050-* 1.07 (0.49)

3/4”x 3/4” A/NTA-075x075-FC34-*-^ 2.98 (75.69) 3/4”-14 OR^-3-913 1.57 (0.71) NTA-075x075-* 1.07 (0.49)

3/4”x 1” A/NTA-075x100-FC34-*-^ 3.07 (77.98) 1”-11-1/2 OR^-3-913 1.64 (0.74) NTA-075x100-* 1.19 (0.54)

1”x 3/4” A/NTA-100x075-FC34-*-^ 3.23 (82.04) 3/4”-14 OR^-3-916 1.91 (0.87) NTA-100x075-* 1.28 (0.58)

1”x 1” A/NTA-100x100-FC34-*-^ 3.32 (84.33) 1”-11-1/2 OR^-3-916 1.97 (0.89) NTA-100x100-* 1.34 (0.61)

1”x 1-1/4” A/NTA-100x125-FC34-*-^ 3.33 (84.58) 1-1/4”-11-1/2 OR^-3-916 2.25 (1.02) NTA-100x125-* 1.62 (0.73)

1-1/4”x 1” A/NTA-125x100-FC34-*-^ 3.57 (90.68) 1”-11-1/2 OR^-3-918 2.74 (1.24) NTA-125x100-* 1.84 (0.83)

1-1/4”x 1-1/4” A/NTA-125x125-FC34-*-^ 3.58 (90.93) 1-1/4”-11-1/2 OR^-3-918 2.77 (1.26) NTA-125x125-* 1.87 (0.85)

1-1/4”x 1-1/2” A/NTA-125x150-FC34-*-^ 3.61 (91.69) 1-1/2”-11-1/2 OR^-3-918 3.12 (1.42) NTA-125x150-* 2.18 (0.99)

1-1/2”x 1-1/4” A/NTA-150x125-FC34-*-^ 4.58 (116.33) 1-1/4”-11-1/2 OR^-3-924 3.90 (1.77) NTA-150x125-* 3.00 (1.56)

1-1/2”x 1-1/2” A/NTA-150x150-FC34-*-^ 4.61 (117.09) 1-1/2”-11-1/2 OR^-3-924 4.45(2.02) NTA-150x150-* 3.10 (1.41)

1-1/2” x 2” A/NTA-150x200-FC34-*-^ 4.63 (117.60) 2”-11-1/2 OR^-3-924 4.95 (2.25) NTA-150x200-* 3.60 (1.36)

2”x 1-1/2” A/NTA-200x150-FC34-*-^ 4.61 (117.09) 1-1/2”-11-1/2 OR^-3-928 5.98 (2.71) NTA-200x150-* 3.96 (1.80)

2”x 2” A/NTA-200x200-FC34-*-^ 4.63 (117.60) 2”-11-1/2 OR^-3-928 6.02 (2.73) NTA-200x200-* 4.00 (1.81)

A/NTA – NPT Male Thread Adapter Complete Assembly

SAE 3000 PSI NPT Male Thread Adapter Complete Assembly SAE J518 Code 61 (ISO 6162-‐1)

A/NTA – NPT Male Thread Adapter Complete Assembly

Dimensions in (mm)

Size (flange x thread) Complete Assembly

Part No. L

NPTF Thread (Dryseal)

O-‐Ring (Buna) Part No. Assembly

WT lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

1/2”x 1/2” A/NTA-‐050x050-‐FC34-‐*-‐^ 3.38 (85.9) 1/2”-‐14 OR^-‐3-‐909 1.07 (0.49) NTA-‐050x050-‐* 0.57 (0.26) 1/2”x 3/4” A/NTA-‐050x075-‐FC34-‐*-‐^ 3.38 (85.9) 3/4”-‐14 OR^-‐3-‐909 1.24 (0.56) NTA-‐050x075-‐* 0.74 (0.34) 3/4”x 1/2” A/NTA-‐075x050-‐FC34-‐*-‐^ 3.50 (88.9) 1/2”-‐14 OR^-‐3-‐913 1.57 (0.71) NTA-‐075x050-‐* 1.07 (0.49) 3/4”x 3/4” A/NTA-‐075x075-‐FC34-‐*-‐^ 3.50 (88.9) 3/4”-‐14 OR^-‐3-‐913 1.57 (0.71) NTA-‐075x075-‐* 1.07 (0.49) 3/4”x 1” A/NTA-‐075x100-‐FC34-‐*-‐^ 3.69 (93.7) 1”-‐11 1/2 OR^-‐3-‐913 1.64 (0.74) NTA-‐075x100-‐* 1.19 (0.54) 1”x 3/4” A/NTA-‐100x075-‐FC34-‐*-‐^ 3.75 (95.3) 3/4”-‐14 OR^-‐3-‐916 1.91 (0.87) NTA-‐100x075-‐* 1.28 (0.58) 1”x 1” A/NTA-‐100x100-‐FC34-‐*-‐^ 3.94 (100.1) 1”-‐11 1/2 OR^-‐3-‐916 1.97 (0.89) NTA-‐100x100-‐* 1.34 (0.61)

1”x 1 1/4” A/NTA-‐100x125-‐FC34-‐*-‐^ 3.97 (100.8) 1 1/4”-‐11 1/2 OR^-‐3-‐916 2.25 (1.02) NTA-‐100x125-‐* 1.62 (0.73) 1 1/4”x 1” A/NTA-‐125x100-‐FC34-‐*-‐^ 4.19 (106.4) 1”-‐11 1/2 OR^-‐3-‐918 2.74 (1.24) NTA-‐125x100-‐* 1.84 (0.83)

1 1/4”x 1 1/4” A/NTA-‐125x125-‐FC34-‐*-‐^ 4.22 (107.2) 1 1/4”-‐11 1/2 OR^-‐3-‐918 2.77 (1.26) NTA-‐125x125-‐* 1.87 (0.85) 1 1/4”x 1 1/2” A/NTA-‐125x150-‐FC34-‐*-‐^ 4.25 (108.0) 1 1/2”-‐11 1/2 OR^-‐3-‐918 3.12 (1.42) NTA-‐125x150-‐* 2.18 (0.99) 1 1/2”x 1 1/4” A/NTA-‐150x125-‐FC34-‐*-‐^ 5.22 (132.6) 1 1/4”-‐11 1/2 OR^-‐3-‐924 3.90 (1.77) NTA-‐150x125-‐* 3.00 (1.56) 1 1/2”x 1 1/2” A/NTA-‐150x150-‐FC34-‐*-‐^ 5.25 (133.4) 1 1/2”-‐11 1/2 OR^-‐3-‐924 4.45(2.02) NTA-‐150x150-‐* 3.10 (1.41) 1 1/2” x 2” A/NTA-‐150x200-‐FC34-‐*-‐^ 5.28 (134.1) 2”-‐11 1/2 OR^-‐3-‐924 4.95 (2.25) NTA-‐150x200-‐* 3.60 (1.36) 2”x 1 1/2” A/NTA-‐200x150-‐FC34-‐*-‐^ 5.25 (133.4) 1 1/2”-‐11 1/2 OR^-‐3-‐928 5.98 (2.71) NTA-‐200x150-‐* 3.96 (1.80) 2”x 2” A/NTA-‐200x200-‐FC34-‐*-‐^ 5.28 (134.1) 2”-‐11 1/2 OR^-‐3-‐928 6.02 (2.73) NTA-‐200x200-‐* 4.00 (1.81)

Flange Option: • Standard, FC34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Clearance Flange. • FT34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) UNC Threaded Flange. • FTM34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Metric Threaded Flange. * Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = Stainless Steel, Type 316. Body Only • SSA = Stainless Steel, Type 316. All SS Including Flange ^ O-‐Ring Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Ordering Example: A/NTA-‐200x150-‐FC34-‐SS-‐V

Flange Option

* Insert Material


Complete Flange Set Includes: • One (1) Male Thread Adapter • One (1) Retain Ring Flange • One (1) Retain Ring • One (1) Face O-‐Ring (O-‐Ring 1)



DRAFT Complete Flange Set Includes:• One (1) Male Thread Adapter• One (1) Retain Ring Flange• One (1) Retain Ring• One (1) Face O-Ring (O-Ring 1)



* Materials:Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316. Body OnlySSA = Stainless Steel, Type 316. All SS Including Flange


Ordering Example: A/NTA-200x150-FC34-SS-V

Flange Option

* Insert Material


TUBE-MAC.comG41


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI BSPP Male Thread Adapter Complete AssemblySAE J518 Code 61 (ISO 6162-1)



Dimensionsin (mm) Thread

Size

O-Ring 1 (Buna)

Part Number

Seal 2(Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)L

1/2”x 1/2” A/BTA-050x050-FC34-*-^ 2.63 (66.80) 1/2”-14 OR^-3-909 DR^-G050 1.06 (0.48) BTA-050x050-* 0.60 (0.27)

1/2”x 3/4” A/BTA-050x075- FC34-*-^ 2.63 (66.80) 3/4”-14 OR^-3-909 DR^-G075 1.16 (0.53) BTA-050x075-* 0.70 (0.32)



3/4”x 1” A/BTA-075x100- FC34-*-^ 2.75 (69.85) 1”-11 OR^-3-913 DR^-G100 1.57 (0.71) BTA-075x100-* 1.07 (0.49)

1”x 3/4” A/BTA-100x075- FC34-*-^ 3.00 (76.20) 3/4”-14 OR^-3-916 DR^-G075 1.82 (0.83) BTA-100x075-* 1.21 (0.55)

1”x 1” A/BTA-100x100- FC34-*-^ 3.00 (76.20) 1”-11 OR^-3-916 DR^-G100 1.93 (0.88) BTA-100x100-* 1.30 (0.59)

1”x 1-1/4” A/BTA-100x125- FC34-*-^ 3.00 (76.20) 1-1/4”-11 OR^-3-916 DR^-G125 2.16 (0.98) BTA-100x125-* 1.55 (0.70)

1-1/4”x 1” A/BTA-125x100- FC34-*-^ 3.25 (82.55) 1”-11 OR^-3-918 DR^-G100 2.70 (1.22) BTA-125x100-* 1.80 (0.82)

1-1/4”x 1-1/4” A/BTA-125x125- FC34-*-^ 3.25 (82.55) 1-1/4”-11 OR^-3-918 DR^-G125 2.81 (1.27) BTA-125x125-* 1.87 (0.85)




1-1/2” x ♦2” A/BTA-150x200- FC34-*-^ 4.25 (107.95) 2”-11 OR^-3-924 BS^-3236 4.95 (2.25) BTA-150x200-* 3.60 (1.63)

2”x 1-1/2” A/BTA-200x150- FC34-*-^ 4.38 (111.25) 1-1/2”-11 OR^-3-928 DR^-G150 5.98 (2.71) BTA-200x150-* 3.94 (1.79)

2” x ♦2” A/BTA-200x200- FC34-*-^ 4.38 (111.25) 2”-11 OR^-3-928 BS^-3236 6.02 (2.73) BTA-200x200-* 4.00 (1.81)

A/BTA – BSPP Male Thread Adapter Complete Assembly

SAE 3000 PSI BSPP Male Thread Adapter Complete Assembly SAE J518 Code 61 (ISO 6162-‐1)

A/BTA – BSPP Male Thread Adapter Complete Assembly

Dimensions in (mm) Size (flange x

thread) Complete Assembly

Part No. L

Thread Size

O-‐Ring 1 (Buna)

Part No.

Seal 2 (Buna)

Part No.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

1/2”x 1/2” A/BTA-‐050x050-‐FC34-‐*-‐^ 3.18 (80.8) 1/2”-‐14 OR^-‐3-‐909 DR^-‐G050 1.06 (0.48) BTA-‐050x050-‐* 0.60 (0.27) 1/2”x 3/4” A/BTA-‐050x075-‐ FC34-‐*-‐^ 3.26 (82.8) 3/4”-‐14 OR^-‐3-‐909 DR^-‐G075 1.16 (0.53) BTA-‐050x075-‐* 0.70 (0.32) 3/4”x 1/2” A/BTA-‐075x050-‐ FC34-‐*-‐^ 3.30 (83.8) 1/2”-‐14 OR^-‐3-‐913 DR^-‐G050 1.57 (0.71) BTA-‐075x050-‐* 1.07 (0.49) 3/4”x 3/4” A/BTA-‐075x075-‐ FC34-‐*-‐^ 3.38 (85.9) 3/4”-‐14 OR^-‐3-‐913 DR^-‐G075 1.57 (0.71) BTA-‐075x075-‐* 1.07 (0.49) 3/4”x 1” A/BTA-‐075x100-‐ FC34-‐*-‐^ 3.46 (87.9) 1”-‐11 OR^-‐3-‐913 DR^-‐G100 1.57 (0.71) BTA-‐075x100-‐* 1.07 (0.49) 1”x 3/4” A/BTA-‐100x075-‐ FC34-‐*-‐^ 3.63 (92.2) 3/4”-‐14 OR^-‐3-‐916 DR^-‐G075 1.82 (0.83) BTA-‐100x075-‐* 1.21 (0.55) 1”x 1” A/BTA-‐100x100-‐ FC34-‐*-‐^ 3.71 (94.2) 1”-‐11 OR^-‐3-‐916 DR^-‐G100 1.93 (0.88) BTA-‐100x100-‐* 1.30 (0.59)

1”x 1 1/4” A/BTA-‐100x125-‐ FC34-‐*-‐^ 3.79 (96.3) 1 1/4”-‐11 OR^-‐3-‐916 DR^-‐G125 2.16 (0.98) BTA-‐100x125-‐* 1.55 (0.70) 1 1/4”x 1” A/BTA-‐125x100-‐ FC34-‐*-‐^ 3.96 (100.6) 1”-‐11 OR^-‐3-‐918 DR^-‐G100 2.70 (1.22) BTA-‐125x100-‐* 1.80 (0.82)

1 1/4”x 1 1/4” A/BTA-‐125x125-‐ FC34-‐*-‐^ 4.04 (102.6) 1 1/4”-‐11 OR^-‐3-‐918 DR^-‐G125 2.81 (1.27) BTA-‐125x125-‐* 1.87 (0.85) 1 1/4”x 1 1/2” A/BTA-‐125x150-‐ FC34-‐*-‐^ 4.12 (104.7) 1 1/2”-‐11 OR^-‐3-‐918 DR^-‐G150 2.90 (1.32) BTA-‐125x150-‐* 2.00 (0.91) 1 1/2”x 1 1/4” A/BTA-‐150x125-‐ FC34-‐*-‐^ 5.04 (128.0) 1 1/4”-‐11 OR^-‐3-‐924 DR^-‐G125 4.45 (2.02) BTA-‐150x125-‐* 3.02 (1.37) 1 1/2”x 1 1/2” A/BTA-‐150x150-‐ FC34-‐*-‐^ 5.12 (130.1) 1 1/2”-‐11 OR^-‐3-‐924 DR^-‐G150 4.35 (1.97) BTA-‐150x150-‐* 3.00 (1.36)

1 1/2” x ♦2” A/BTA-‐150x200-‐ FC34-‐*-‐^ 5.37 (136.4) 2”-‐11 OR^-‐3-‐924 BS^-‐3236 4.95 (2.25) BTA-‐150x200-‐* 3.60 (1.63) 2”x 1 1/2” A/BTA-‐200x150-‐ FC34-‐*-‐^ 5.12 (130.1) 1 1/2”-‐11 OR^-‐3-‐928 DR^-‐G150 5.98 (2.71) BTA-‐200x150-‐* 3.94 (1.79)

2” x ♦2” A/BTA-‐200x200-‐ FC34-‐*-‐^ 5.37 (136.4) 2”-‐11 OR^-‐3-‐928 BS^-‐3236 6.02 (2.73) BTA-‐200x200-‐* 4.00 (1.81)

♦ The seal for the 2” BSPP thread consists of a self-‐centering bonded seal. Flange Option: • Standard, FC34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Clearance Flange. • FT34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) UNC Threaded Flange. • FTM34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Metric Threaded Flange. * Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = Stainless Steel, Type 316. Body Only • SSA = Stainless Steel, Type 316. All SS Including Flange ^ O-‐Ring Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Ordering Example: A/BTA-‐200x150-‐FC34-‐SS-‐V

Flange Option

* Insert Material


Complete Flange Set Includes: • One (1) Male Thread Adapter • One (1) Retain Ring Flange • One (1) Retain Ring • One (1) Face O-‐Ring (O-‐Ring 1) • One (1) Thread Seal (Seal 2)



DRAFT Complete Flange Set Includes:• One (1) Male Thread Adapter• One (1) Retain Ring Flange• One (1) Retain Ring• One (1) Face O-Ring (O-Ring 1)• One (1) Thread Seal (Seal 2)



* Materials:Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316. Body OnlySSA = Stainless Steel, Type 316. All SS Including Flange


Ordering Example: A/BTA-200x150-FC34-SS-V

Flange Option

* Insert Material


G42TUBE-MAC.com




Ordering Example: SFTO34-150-SS-V

* Insert Material


Size FlangePart Number

Dimensions (in) SAEThreadUNF-2A

Drill Dia.

(in) J

Bolt Minimum Grade 8

O-Ring (Buna)

Part Number

WTlbs (kg)


Bolt Torque ft.lbs.A B D E L G H

1/2” STFO34-050-*-^ 0.69 1.50 0.51 0.63 1.42 1.81 2.16 3/4”-16 0.35 5/16” UNC OR^-2-210 0.55 (0.25) 5000 (350) 15-18

3/4” STFO34-075-*-^ 0.88 1.88 0.75 0.71 1.42 2.06 2.56 1-1/16”-12 0.43 3/8” UNC OR^-2-214 0.86 (0.39) 5000 (350) 20-30

1” STFO34-100-*-^ 1.03 2.06 0.98 0.71 1.50 2.31 2.76 1-5/16”-12 0.43 3/8” UNC OR^-2-219 1.00 (0.45) 5000 (350) 20-30

1-1/4” STFO34-125-*-^ 1.19 2.31 1.26 0.83 1.61 2.88 3.11 1-5/8”-12 0.45 7/16” UNC OR^-2-222 1.46 (0.66) 4000 (275) 40-50

1-1/2” STFO34-150-*-^ 1.41 2.75 1.50 0.98 1.77 3.25 3.66 1-7/8”-12 0.53 1/2” UNC OR^-2-225 2.31 (1.05) 3000 (210) 80-90

SAE 3000 PSI SAE Female Thread Flange with O-‐Ring Face and Clearance Holes SAE J518 Code 61 (ISO 6162-‐1)

STFO34 SAE Female Thread Flange -‐ SAE Code 61 O-‐Ring Face with Clearance Holes with Buna O-‐Ring


Flange Part No.

A B D E L G H

SAE Thread UNF-2A

Drill Dia.(in)

J


O-Ring (Buna) Part No.

WT lbs (kg)


Bolt Torque ft.lbs.

1/2” STFO34-‐050-‐*-‐^ 0.69 1.50 0.51 0.63 1.42 1.81 2.16 3/4”-‐16 0.35 5/16” UNC OR^-‐2-‐210 0.55 (0.25) 5000 (350) 15-‐18 3/4” STFO34-‐075-‐*-‐^ 0.88 1.88 0.75 0.71 1.42 2.06 2.56 1 1/16”-‐12 0.43 3/8” UNC OR^-‐2-‐214 0.86 (0.39) 5000 (350) 20-‐30 1” STFO34-‐100-‐*-‐^ 1.03 2.06 0.98 0.71 1.50 2.31 2.76 1 5/16”-‐12 0.43 3/8” UNC OR^-‐2-‐219 1.00 (0.45) 5000 (350) 20-‐30

1 1/4” STFO34-‐125-‐*-‐^ 1.19 2.31 1.26 0.83 1.61 2.88 3.11 1 5/8”-‐12 0.45 7/16” UNC OR^-‐2-‐222 1.46 (0.66) 4000 (275) 40-‐50 1 1/2” STFO34-‐150-‐*-‐^ 1.41 2.75 1.50 0.98 1.77 3.25 3.66 1 7/8”-‐12 0.53 1/2” UNC OR^-‐2-‐225 2.31 (1.05) 3000 (210) 80-‐90

* Materials:• Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).• SS = All Stainless Steel, Type 316.

^ O-‐Ring Type: • Standard, No Designation = Buna Nitrile.• V = Viton.

Ordering Example: SFTO34-‐150-‐SS-‐V

* Insert Material


DRAFT SAE 3000 PSI SAE Female Thread Flange with O-Ring Face and Clearance HolesSAE J518 Code 61 (ISO 6162-1)

STFO34 - Female Thread Flange with O-Ring Face and Clearance Holes

TUBE-MAC.comG43


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n



Ordering Example: STFF34-150-SS-V

* Insert Material



Dimensions (in) SAEThreadUNF-2A

Bolt ThreadUNC-2B

WTlbs (kg)

Working PressurePSI (bar)


1/2” STFF34-050-*-^ 0.69 1.50 0.51 0.63 1.42 1.81 2.16 3/4”-16 5/16” 0.55 (0.25) 5000 (350) 15-18

3/4” STFF34-075-*-^ 0.88 1.88 0.75 0.71 1.42 2.06 2.56 1 1/16”-12 3/8” 0.86 (0.39) 5000 (350) 20-30

1” STFF34-100-*-^ 1.03 2.06 0.98 0.71 1.50 2.31 2.76 1 5/16”-12 3/8” 1.00 (0.45) 5000 (350) 20-30

1-1/4” STFF34-125-*-^ 1.19 2.31 1.26 0.83 1.61 2.88 3.11 1 5/8”-12 7/16” 1.46 (0.66) 4000 (275) 40-50

1-1/2” STFF34-150-*-^ 1.41 2.75 1.50 0.98 1.77 3.25 3.66 1 7/8”-12 1/2” 2.31 (1.05) 3000 (210) 80-90

SAE 3000 PSI SAE Female Thread Flange with Flat Face and Threaded HolesSAE J518 Code 61 (ISO 6162-1)

STFF34 - Female Thread Flange with Flat Face and Threaded Holes

SAE 3000 PSI SAE Female Thread Flange with Flat Face and Threaded Holes SAE J518 Code 61 (ISO 6162-‐1)

STFF34 SAE Female Thread Flange -‐ SAE Code 61 Flat Face with Threaded Holes


Flange Part No.

A B D E L G H

SAE Thread UNF-2A

Bolt Thread UNC-2B

WT lbs (kg)


Bolt Torque ft.lbs.

1/2” STFF34-‐050-‐*-‐^ 0.69 1.50 0.51 0.63 1.42 1.81 2.16 3/4”-‐16 5/16” 0.55 (0.25) 5000 (350) 15-‐18 3/4” STFF34-‐075-‐*-‐^ 0.88 1.88 0.75 0.71 1.42 2.06 2.56 1 1/16”-‐12 3/8” 0.86 (0.39) 5000 (350) 20-‐30 1” STFF34-‐100-‐*-‐^ 1.03 2.06 0.98 0.71 1.50 2.31 2.76 1 5/16”-‐12 3/8” 1.00 (0.45) 5000 (350) 20-‐30

1 1/4” STFF34-‐125-‐*-‐^ 1.19 2.31 1.26 0.83 1.61 2.88 3.11 1 5/8”-‐12 7/16” 1.46 (0.66) 4000 (275) 40-‐50 1 1/2” STFF34-‐150-‐*-‐^ 1.41 2.75 1.50 0.98 1.77 3.25 3.66 1 7/8”-‐12 1/2” 2.31 (1.05) 3000 (210) 80-‐90



Ordering Example: STFF34-‐150-‐SS-‐V

* Insert Material


DRAFT

G44TUBE-MAC.com




Ordering Example: NTFO34-200-SS-V

* Insert Material



Dimensions (in) NPTFThread

Drill Dia.

(in) J


O-Ring (Buna)

Part Number

WTlbs (kg)



1/2” NTFO34-050-*-^ 0.69 1.50 0.51 0.63 1.42 1.81 2.16 1/2”-14 0.35 5/16” UNC OR^-2-210 0.55 (0.25) 5000 (350) 15-18

3/4” NTFO34-075-*-^ 0.88 1.88 0.75 0.71 1.42 2.06 2.56 3/4”-14 0.43 3/8” UNC OR^-2-214 0.86 (0.39) 5000 (350) 20-30

1” NTFO34-100-*-^ 1.03 2.06 0.98 0.71 1.50 2.31 2.76 1”-11-1/2 0.43 3/8” UNC OR^-2-219 1.00 (0.45) 5000 (350) 20-30

1-1/4” NTFO34-125-*-^ 1.19 2.31 1.26 0.83 1.61 2.88 3.11 1-1/4”-11-1/2 0.45 7/16” UNC OR^-2-222 1.46 (0.66) 4000 (275) 40-50

1-1/2” NTFO34-150-*-^ 1.41 2.75 1.50 0.98 1.77 3.25 3.66 1-1/2”-11-1/2 0.53 1/2” UNC OR^-2-225 2.31 (1.05) 3000 (210) 80-90

2” NTFO34-200-*-^ 1.69 3.06 2.01 0.98 1.77 3.81 4.02 2”-11-1/2 0.53 1/2” UNC OR^-2-228 2.62 (1.19) 3000 (210) 80-90

2-1/2” NTFO34-250-*-^ 2.00 3.50 2.48 0.98 1.97 4.28 4.49 2-1/2”-8 0.53 1/2” UNC OR^-2-232 3.09 (1.40) 2500 (175) 80-90

3” NTFO34-300-*-^ 2.44 4.19 2.87 1.06 1.97 5.16 5.28 3”-8 0.69 5/8” UNC OR^-2-237 4.74 (2.15) 2000 (140) 110-120

SAE 3000 PSI NPT Female Thread Flange with O-‐Ring Face and Clearance Holes SAE J518 Code 61 (ISO 6162-‐1)

NTFO34 NPT Female Thread Flange -‐ SAE Code 61 ‘O’ Ring Face with Clearance Holes with Buna O-‐Ring

Dimensions (in) Size Flange

Part No. A B D E L G H

NPTF Thread

Drill Dia.(in)

J


O-Ring (Buna) Part No.

WT lbs (kg)


Bolt Torque ft.lbs.

1/2” NTFO34-‐050-‐*-‐^ 0.69 1.50 0.51 0.63 1.42 1.81 2.16 1/2”-‐14 0.35 5/16” UNC OR^-‐2-‐210 0.55 (0.25) 5000 (350) 15-‐18 3/4” NTFO34-‐075-‐*-‐^ 0.88 1.88 0.75 0.71 1.42 2.06 2.56 3/4”-‐14 0.43 3/8” UNC OR^-‐2-‐214 0.86 (0.39) 5000 (350) 20-‐30 1” NTFO34-‐100-‐*-‐^ 1.03 2.06 0.98 0.71 1.50 2.31 2.76 1”-‐11 1/2 0.43 3/8” UNC OR^-‐2-‐219 1.00 (0.45) 5000 (350) 20-‐30

1 1/4” NTFO34-‐125-‐*-‐^ 1.19 2.31 1.26 0.83 1.61 2.88 3.11 1 1/4”-‐11 1/2 0.45 7/16” UNC OR^-‐2-‐222 1.46 (0.66) 4000 (275) 40-‐50 1 1/2” NTFO34-‐150-‐*-‐^ 1.41 2.75 1.50 0.98 1.77 3.25 3.66 1 1/2”-‐11 1/2 0.53 1/2” UNC OR^-‐2-‐225 2.31 (1.05) 3000 (210) 80-‐90 2” NTFO34-‐200-‐*-‐^ 1.69 3.06 2.01 0.98 1.77 3.81 4.02 2”-‐11 1/2 0.53 1/2” UNC OR^-‐2-‐228 2.62 (1.19) 3000 (210) 80-‐90

2 1/2” NTFO34-‐250-‐*-‐^ 2.00 3.50 2.48 0.98 1.97 4.28 4.49 2 1/2”-‐8 0.53 1/2” UNC OR^-‐2-‐232 3.09 (1.40) 2500 (175) 80-‐90 3” NTFO34-‐300-‐*-‐^ 2.44 4.19 2.87 1.06 1.97 5.16 5.28 3”-‐8 0.69 5/8” UNC OR^-‐2-‐237 4.74 (2.15) 2000 (140) 110-‐120



Ordering Example: NTFO34-‐200-‐SS-‐V

* Insert Material


DRAFT SAE 3000 PSI NPT Female Thread Flange with O-Ring Face and Clearance HolesSAE J518 Code 61 (ISO 6162-1)

NTFO34 - NPT Female Thread Flange with O-Ring Face and Clearance Holes

TUBE-MAC.comG45


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n



Ordering Example: NTFF34-200-SS-V

* Insert Material



Dimensions (in) NPTFThread

BoltThreadUNC-2B

WTlbs (kg)



1/2” NTFF34-050-*-^ 0.69 1.50 0.51 0.63 1.42 1.81 2.16 1/2”-14 5/16” 0.55 (0.25) 5000 (350) 15-18

3/4” NTFF34-075-*-^ 0.88 1.88 0.75 0.71 1.42 2.06 2.56 3/4”-14 3/8” 0.86 (0.39) 5000 (350) 20-30

1” NTFF34-100-*-^ 1.03 2.06 0.98 0.71 1.50 2.31 2.76 1”-11-1/2 3/8” 1.00 (0.45) 5000 (350) 20-30

1-1/4” NTFF34-125-*-^ 1.19 2.31 1.26 0.83 1.61 2.88 3.11 1-1/4”-11-1/2 7/16” 1.46 (0.66) 4000 (275) 40-50

1-1/2” NTFF34-150-*-^ 1.41 2.75 1.50 0.98 1.77 3.25 3.66 1-1/2”-11-1/2 1/2” 2.31 (1.05) 3000 (210) 80-90

2” NTFF34-200-*-^ 1.69 3.06 2.01 0.98 1.77 3.81 4.02 2”-11-1/2 1/2” 2.62 (1.19) 3000 (210) 80-90

2-1/2” NTFF34-250-*-^ 2.00 3.50 2.48 0.98 1.97 4.28 4.49 2-1/2”-8 1/2” 3.09 (1.40) 2500 (175) 80-90

3” NTFF34-300-*-^ 2.44 4.19 2.87 1.06 1.97 5.16 5.28 3”-8 5/8” 4.74 (2.15) 2000 (140) 110-120

SAE 3000 PSI NPT Female Thread Flange with Flat Face and Threaded Holes SAE J518 Code 61 (ISO 6162-‐1)

NTFF34 NPT Female Thread Flange -‐ SAE Code 61 Flat Face with Threaded Holes


Flange Part No.

A B D E L G H

NPTF Thread

Bolt Thread UNC-2B

WT lbs (kg)


Bolt Torque ft.lbs.

1/2” NTFF34-‐050-‐*-‐^ 0.69 1.50 0.51 0.63 1.42 1.81 2.16 1/2”-‐14 5/16” 0.55 (0.25) 5000 (350) 15-‐18 3/4” NTFF34-‐075-‐*-‐^ 0.88 1.88 0.75 0.71 1.42 2.06 2.56 3/4”-‐14 3/8” 0.86 (0.39) 5000 (350) 20-‐30 1” NTFF34-‐100-‐*-‐^ 1.03 2.06 0.98 0.71 1.50 2.31 2.76 1”-‐11 1/2 3/8” 1.00 (0.45) 5000 (350) 20-‐30

1 1/4” NTFF34-‐125-‐*-‐^ 1.19 2.31 1.26 0.83 1.61 2.88 3.11 1 1/4”-‐11 1/2 7/16” 1.46 (0.66) 4000 (275) 40-‐50 1 1/2” NTFF34-‐150-‐*-‐^ 1.41 2.75 1.50 0.98 1.77 3.25 3.66 1 1/2”-‐11 1/2 1/2” 2.31 (1.05) 3000 (210) 80-‐90 2” NTFF34-‐200-‐*-‐^ 1.69 3.06 2.01 0.98 1.77 3.81 4.02 2”-‐11 1/2 1/2” 2.62 (1.19) 3000 (210) 80-‐90

2 1/2” NTFF34-‐250-‐*-‐^ 2.00 3.50 2.48 0.98 1.97 4.28 4.49 2 1/2”-‐8 1/2” 3.09 (1.40) 2500 (175) 80-‐90 3” NTFF34-‐300-‐*-‐^ 2.44 4.19 2.87 1.06 1.97 5.16 5.28 3”-‐8 5/8” 4.74 (2.15) 2000 (140) 110-‐120



Ordering Example: NTFF34-‐200-‐SS-‐V

* Insert Material


DRAFT SAE 3000 PSI NPT Female Thread Flange with Flat Face and Threaded HolesSAE J518 Code 61 (ISO 6162-1)

NTFF34 - NPT Female Thread Flange with Flat Face and Threaded Holes

G46TUBE-MAC.com


Code

PAFPipe Assembly -Flared

SCH40-075SCH80-075SCH40-100SCH80-100SCH40-125 SCH80-125

SCH40-150SCH80-150SCH40-200SCH80-200

3/4"

SCH40-050SCH80-050

1/2"

1"

11/4"

11/2"

2"

SCH40-250SCH80-250SCH40-300SCH80-300

21/2"

3"

FC34FFC34

SAE Code 61 W/Clearance Holes

FT34*FFT34

SAE Code 61 W/Tapped Holes

Cone TypeRef. pages(???)

PAF OptionsPipe Size & Schedule

CF

CO

Cone - Flat Face

Cone - 'O' Ring Face

L2Length Specify (in.)

VitonPainted (Specify)

V P

Options

Pipe Size & Schedule

Pipe & Cone Material

Complete Stainless SteelAssembly:(including flanges) SS

304

316

2205

TMP304SSTMP316SS♦TMP2205SS


Stainless Steel Ref. ???

52

37

TMP52CD♦♦TMP37CD

Pipe &Cone Material

Carbon SteelRef. ???

Length

Flange Type

Carbon Steel Ref. pages

(???)

♦♦TMP37CD PIPE IS ONLY AVAILABLE IN 2 1/2” & 3” SCHEDULE 40 SIZES◆TMP2205SS PIPE IS ONLY AVAILABLE UPON REQUEST

* NORMALLY USED FOR CONNECTION TO SPLIT FLANGE TYPEENDS

PART NO. (EXAMPLE): PAF/52 - SCH80-100 - FC34 - FC34 - CO - CF - 240

• ASSEMBLY WORKING PRESSURE RATINGS ARE SUBJECT TO THE LESSER OF THE FLANGE OR PIPE RA TINGS• SEE REFERENCE PAGES INDICATED ABOVE FOR PRESSURERATINGS

Flange 1

Flange 2

Cone 1

Cone 2

• REDUCING FLANGES AND CONES ARE AVAILABLE (REFERENCE PAGES ???)FOR FLARE FLANGE ASSEMBLIES UTILIZING REDUCING FLANGES AND CONES ADD (R) T O FLANGE AND CONE CODENUMBERS.ie. SAE code 61 flare flange with clearance holes - code number FC34 would be FCR34-(flan ge size)

REDUCING PART NO. (EXAMPLE): BPAF/52 - SCH80-100 - FCR34-125 - FC34 - COR - CF - R1 - 125 - 90 - 115Consult factory for ordering assistance

Flare Flange Pipe Assembly, NPS

COMPLETE ASSEMBLY CONSISTSOF:• ONE (1) LENGTH OF CLEAN PIPE• TWO (2) FLARE FLANGES

• TWO (2) CONES

Typical PAF Assembly

NEED NEW IMAGE

Flare Flange Pipe Assembly, NPS Typical PAF Assembly

♦♦TMP37CD PIPE IS ONLY AVAILABLE IN 2-1/2” & 3” SCHEDULE 40 SIZES

♦TMP2205SS PIPE IS ONLY AVAILABLE UPON REQUEST* NORMALLY USED FOR CONNECTION TO SPLIT FLANGE TYPE ENDSPART Number (EXAMPLE): PAF/52 - SCH80-100 - FC34 - FC34 - CO - CF - 240

ASSEMBLY WORKING PRESSURE RATINGS ARE SUBJECT TO THE LESSER OF THE FLANGE OR PIPE RATINGS

Complete Flange Set Includes:• One (1) length of clean pipe • Two (2) flare flanges • Two (2) cones

PAF Pipe & ConeMaterial


Flange1

Flange2

Cone1

Cone2 Length Options/ - - - - - - -

Bent Pipe Assembly - Flared PAF


Carbon Steel

TMP52CD 52

♦♦TMP37CD 37

Pipe & Cone MaterialStainless

Steel

TMP304SS 304

TMP316SS 316

♦TMP2205SS 2205

Pipe Size &

Schedule

1/2”SCH40-050SCH80-050

3/4”SCH40-075SCH80-075

1”SCH40-100SCH80-100

1-1/4”SCH40-125SCH80-125

1-1/2”SCH40-150SCH80-150

2”SCH40-200SCH80-200

2-1/2”SCH40-250SCH80-250

3”SCH40-300SCH80-300

Flange TypeCarbon Steel

FFC34SAE Code 61

W/Clearance HolesFC34

*FFT34SAE Code 61

W/Tapped HolesFT34

Cone TypeCone - Flat Face CF

Cone - ‘O’ Ring Face CO

Length L2 Specify (in.)

Options

Viton V

Painted (Specify) P

Complete Stainless Steel Assembly:

(including flanges)SS

Code

TUBE-MAC.comG47


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

Code

PAFPipe Assembly -Flared

SCH40-075SCH80-075SCH40-100SCH80-100SCH40-125 SCH80-125

SCH40-150SCH80-150SCH40-200SCH80-200

3/4"

SCH40-050SCH80-050

1/2"

1"

11/4"

11/2"

2"

SCH40-250SCH80-250SCH40-300SCH80-300

21/2"

3"

FC34FFC34

SAE Code 61 W/Clearance Holes

FT34*FFT34

SAE Code 61 W/Tapped Holes

Cone TypeRef. pages(???)

PAF OptionsPipe Size & Schedule

CF

CO

Cone - Flat Face

Cone - 'O' Ring Face

L2Length Specify (in.)

VitonPainted (Specify)

V P

Options



Complete Stainless SteelAssembly:(including flanges) SS

304

316

2205

TMP304SSTMP316SS♦TMP2205SS


Stainless Steel Ref. ???

52

37

TMP52CD♦♦TMP37CD

Pipe &Cone Material

Carbon SteelRef. ???

Length

Flange Type

Carbon Steel Ref. pages

(???)

♦♦TMP37CD PIPE IS ONLY AVAILABLE IN 2 1/2” & 3” SCHEDULE 40 SIZES◆TMP2205SS PIPE IS ONLY AVAILABLE UPON REQUEST

* NORMALLY USED FOR CONNECTION TO SPLIT FLANGE TYPEENDS

PART NO. (EXAMPLE): PAF/52 - SCH80-100 - FC34 - FC34 - CO - CF - 240

• ASSEMBLY WORKING PRESSURE RATINGS ARE SUBJECT TO THE LESSER OF THE FLANGE OR PIPE RA TINGS• SEE REFERENCE PAGES INDICATED ABOVE FOR PRESSURERATINGS

Flange 1

Flange 2

Cone 1

Cone 2

• REDUCING FLANGES AND CONES ARE AVAILABLE (REFERENCE PAGES ???)FOR FLARE FLANGE ASSEMBLIES UTILIZING REDUCING FLANGES AND CONES ADD (R) T O FLANGE AND CONE CODENUMBERS.ie. SAE code 61 flare flange with clearance holes - code number FC34 would be FCR34-(flan ge size)

REDUCING PART NO. (EXAMPLE): BPAF/52 - SCH80-100 - FCR34-125 - FC34 - COR - CF - R1 - 125 - 90 - 115Consult factory for ordering assistance

Flare Flange Pipe Assembly, NPS

COMPLETE ASSEMBLY CONSISTSOF:• ONE (1) LENGTH OF CLEAN PIPE• TWO (2) FLARE FLANGES

• TWO (2) CONES

Typical PAF Assembly

NEED NEW IMAGE

Flare Flange Pipe Assembly, Metric Typical PAF Assembly


♦TMP2205SS PIPE IS ONLY AVAILABLE UPON REQUEST

* NORMALLY USED FOR CONNECTION TO SPLIT FLANGE TYPE ENDS

PART Number (EXAMPLE): PAF/52 - 30x4.0 - 100 - FCM34 - FCM34 - CO - CF - 6000


PAF Pipe & ConeMaterial


Flange1

Cone1

Cone2

Options/ - - - - - - -

Bent Pipe Assembly - Flared PAF


Carbon Steel

TMP52CD 52

TMP37CD 37


Steel

TMP304SS 304

TMP316SS 316

♦TMP2205SS 2205

Pipe Size &

Schedule

1/2”20x3.0-05025x3.0-050

3/4”25x3.0-07530x3.0-075

1”30x4.0-10038x4.0-100

1-1/4”38x4.0-125 42x4.0-125

1-1/2”50x3.0-15050x5.0-150

2”60x3.0-20060x5.0-200

2-1/2”73x7.0-25075x5.0-250

3”75x5.0-30090x5.0-300


FFCM34SAE Code 61

W/Clearance HolesFCM34

*FFTM34SAE Code 61

W/Tapped HolesFTM34



Length L2 Specify (mm)

Options

Viton V

Painted (Specify) P



Code LengthFlange2

G48TUBE-MAC.com


Flare Flange Bent Pipe Assembly, NPS Typical BPAF Assembly

Complete assembly consists of:• One (1) length of bent clean pipe • Two (2) flare flanges • Two (2) cones

Size

R1 R2 R3

Dimensions (in)

Dimensions (in)

Dimensions (in)

L(min.) R L(min.) R L(min.) R

1/2” 4.50 1.68 5.50 2.52 6.75 3.88

3/4” 5.00 2.10 6.00 3.15 7.00 4.25

1” 5.50 2.63 7.00 3.95 7.75 4.88

1-1/4” 6.38 3.32 8.00 4.98 8.63 5.63

1-1/2” 7.50 3.80 9.25 5.70 11.75 8.19

2” 8.50 4.75 10.75 7.13 13.00 9.44

2-1/2” 9.75 5.75 12.63 8.63 17.00 12.50

3” 11.00 7.00 14.50 10.50 19.50 15.00

Note: OTHER RADII AVAILABLE (CONSULT FACTORY)

TUBE-MAC.comG49


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

♦♦TMP37CD PIPE IS ONLY AVAILABLE IN 2-1/2” & 3” SCHEDULE 40 SIZES♦TMP2205SS PIPE IS ONLY AVAILABLE UPON REQUEST

PART Number (EXAMPLE): BPAF/52-SCH80-100 -FC34-FC34-CO-CF-R1-125-90-115


Consult factory for ordering assistance

Pipe& ConeMaterial

PipeSize &

ScheduleFlange

1Flange

2Cone

1Cone

2 Rad.LgthL1

Bent Pipe Assembly - Flared BPAF


Carbon Steel

TMP52CD 52

♦♦TMP37CD 37


Steel

TMP304SS 304

TMP316SS 316

♦TMP2205SS 2205

Pipe Size &

Schedule

1/2”SCH40-050SCH80-050

3/4”SCH40-075SCH80-075

1”SCH40-100SCH80-100

1-1/4”SCH40-125SCH80-125

1-1/2”SCH40-150SCH80-150

2”SCH40-200SCH80-200

2-1/2”SCH40-250SCH80-250

3”SCH40-300SCH80-300


FFC34SAE Code 61

W/Clearance HolesFC34

FFT34SAE Code 61

W/Threaded HolesFT34



RadiusField Manufactured R1

Factory Manufactured R2


Angle Max 90º Specify (º)


Options

Viton V

Painted (Specify) P



/ - - - - - - - Ang- LgthL2- Options-

Flare Flange Bent Pipe Assembly, NPS

Code BPAF

G50TUBE-MAC.com


Flare Flange Bent Pipe Assembly, Metric Typical BPAF Assembly


Size

R1 R2 R3

Dimensions (mm)

Dimensions (mm)

Dimensions (mm)

L(min.) R L(min.) R L(min.) R

1/2” 126 50 151 75 176 100

3/4” 134 60 164 90 194 120

1” 153 76 191 114 229 152

1-1/4” 162 84 204 126 246 168

1-1/2” 194 100 244 150 294 200

2” 215 120 275 180 335 240

2-1/2” 264 150 339 225 414 300

3” 294 180 384 270 474 360

Note: OTHER RADII AVAILABLE (CONSULT FACTORY)

TUBE-MAC.comG51


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

♦TMP2205SS PIPE IS ONLY AVAILABLE UPON REQUEST

* NORMALLY USED FOR CONNECTION TO SPLIT FLANGE TYPE ENDS

PART Number (EXAMPLE): BPAF/52 - 30x4.0-100 - FCM34 - FCM34 - CO - CF - R1 - 125 - 90 - 115


BPAF

Pipe& ConeMaterial

PipeSize &

ScheduleFlange

1Flange

2Cone

1Cone

2 Rad.LgthL1/ - - - - - - - Angle- Lgth

L2- Options-Code

Flare Flange Bent Pipe Assembly, Metric

Bent Pipe Assembly - Flared BPAF


Carbon Steel

TMP52CD 52

TMP37CD 37


Steel

TMP304SS 304

TMP316SS 316

♦TMP2205SS 2205

Pipe Size &

Schedule

1/2”20x3.0-05025x3.0-050

3/4”25x3.0-07530x3.0-075

1”30x4.0-10038x4.0-100

1-1/4”38x4.0-12542x4.0-125

1-1/2”50x3.0-15050x5.0-150

2”60x3.0-20060x5.0-200

2-1/2”73x7.0-25075x5.0-250

3”75x5.0-30090x5.0-300


FFCM34SAE Code 61

W/Clearance HolesFCM34

*FFTM34SAE Code 61

W/Tapped HolesFTM34



RadiusField Manufactured R1

Factory Manufactured R2


Angle Max 90º Specify (º)


Options

Viton V

Painted (Specify) P



G52TUBE-MAC.com


SAE 3000 PSI Flare Flange Bend Elbow Complete Assembly, NPS SAE J518 Code 61 (ISO 6162-‐1)

A/FFE Flare Flange Bend Elbow Complete Assembly, NPS R1 Bend Radius

(in) R2 Bend Radius

(in) R3 Bend Radius

(in) Size Complete Assembly

Part No. R L1 R L1 R L1

Assembly WT lbs (kg)


1/2” A/FFE-‐SCH40-‐050-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 5000 (350) 1/2” A/FFE-‐SCH80-‐050-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 5000 (350)

3/4” A/FFE-‐SCH40-‐075-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 5000 (350) 3/4” A/FFE-‐SCH80-‐075-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 5000 (350) 1””

A/FFE-‐SCH40-‐100-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 4700 (325) 1” A/FFE-‐SCH80-‐100-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 5000 (350)

1 1/4” A/FFE-‐SCH40-‐125-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 4000 (280) 1 1/4” A/FFE-‐SCH80-‐125-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 4000 (280) 1 1/2” A/FFE-‐SCH40-‐150-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 3500 (240) 1 1/2” A/FFE-‐SCH80-‐150-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 4000 (280) 1 1/2” A/FFE-‐SCH160-‐150-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐

^ 4000 (280)

2” A/FFE-‐SCH40-‐200-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 2900 (200) 2” A/FFE-‐SCH80-‐200-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 4000 (280) 2” A/FFE-‐SCH160-‐200-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐

^ 4000 (280)

2 1/2” A/FFE-‐SCH40-‐250-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 2600 (180) 2 1/2” A/FFE-‐SCH80-‐250-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 3000 (210) 2 1/2" A/FFE-‐SCH160-‐250-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐

^ 3000 (210)

3” A/FFE-‐SCH40-‐300-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 2300 (160) 3” A/FFE-‐SCH80-‐300-‐FC34-‐FC34-‐CO-‐CO-‐•-‐*-‐^ 3000 (210)

Flange Options: • Standard, FC34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Clearance Flange.• FT34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) UNC Threaded Flange.• FTM34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Metric Threaded Flange.

Cone Options: • Standard, CO = O-‐Ring Faced Cone.• CF = Flat Faced Cone.

Bend Radius Options (Other radii available, consult factory): • R1• R2• R3



Ordering Example: A/FFE-‐SCH40-‐200-‐FC34-‐FC34-‐CO-‐CO-‐R1-‐SS-‐V

Flange 1 Option

Flange 2 Option

Cone 1 Option

Cone 2 Option □ Insert Bend Radius

* Insert Material


Flange Options:FC34 = SAE 3000 PSI Code 61 (ISO 6162-1) ClearanceFT34 = SAE 3000 PSI Code 61 (ISO 6162-1) UNC Threaded

Cone Options:CO = O-ring face coneCF = Flat face con

•Bend Radius Options:R1, R2, or R3

* MaterialsNo Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316. ^ O-Ring Type:No Designation = Buna Nitrile.V = Viton

Size Complete AssemblyPart Number

R1 Bend Radius (in)

R2 Bend Radius (in)

R3 Bend Radius (in)

WorkingPressurePSI (bar)R L1 R L1 R L1

1/2” A/FFE-SCH40-050-FC34-FC34-CO-CO-•-*-^ 1.68 4.5 2.52 5.5 3.875 6.75 5000 (350)




1” A/FFE-SCH40-100-FC34-FC34-CO-CO-•-*-^ 2.63 5.5 3.95 7.0 4.875 7.75 4700 (325)

1” A/FFE-SCH80-100-FC34-FC34-CO-CO-•-*-^ 2.63 5.5 3.95 7.0 4.875 7.75 5000 (350)

1-1/4” A/FFE-SCH40-125-FC34-FC34-CO-CO-•-*-^ 3.32 6.375 4.98 8.0 5.625 8.625 4000 (280)





2” A/FFE-SCH40-200-FC34-FC34-CO-CO-•-*-^ 4.75 8.5 7.125 10.75 9-7/16 13 2900 (200)



2-1/2” A/FFE-SCH40-250-FC34-FC34-CO-CO-•-*-^ 5.75 9.75 8.625 12.625 12.5 17 2600 (180)

2-1/2” A/FFE-SCH80-250-FC34-FC34-CO-CO-•-*-^ 5.75 9.75 8.625 12.625 12.5 17 3000 (210)

2-1/2" A/FFE-SCH160-250-FC34-FC34-CO-CO-•-*-^ 5.75 9.75 8.625 12.625 12.5 17 3000 (210)

3” A/FFE-SCH40-300-FC34-FC34-CO-CO-•-*-^ 7.0 11.0 10.5 14.5 15 19.5 2300 (160)

3” A/FFE-SCH80-300-FC34-FC34-CO-CO-•-*-^ 7.0 11.0 10.5 14.5 15 19.5 3000 (210)

SAE 3000 PSI Flare Flange Bend Elbow Complete Assembly, NPSSAE J518 Code 61 (ISO 6162-1)

A/FFE - Flare Flange Bend Elbow Complete Assembly, NPS

Ordering Example: A/FFE-SCH40-200-FC34-FC34-CO-CO-R1-SS-V

Flange 1 Option

Flange 2 Option

Cone 1 Option

Cone 2 Option

□ Insert Bend Radius

* Insert Material


TUBE-MAC.comG53


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nFlange Options:FCM34 = SAE 3000 PSI Code 61 (ISO 6162-1) ClearanceFTM34 = SAE 3000 PSI Code 61 (ISO 6162-1) Metric Threaded

Cone Options:CO = O-ring face coneCF = Flat face cone

•Bend Radius Options:R1, R2, or R3

* MaterialsNo Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.

^ O-Ring Type:No Designation = Buna Nitrile.V = Viton

Ordering Example: A/FFEM-60x5.0-200-FCM34-FCM34-CO-CO-R1-SS-V

Flange 1 Option

Flange 2 Option

Cone 1 Option

Cone 2 Option

• Insert Bend Radius

* Insert Material


SAE 3000 PSI Flare Flange Bend Elbow Complete Assembly, MetricSAE J518 Code 61 (ISO 6162-1)

A/FFEM - Flare Flange Bend Elbow Complete Assembly, Metric


R1 Bend Radius (mm)

R2 Bend Radius (mm)

R3 Bend Radius (mm)

WorkingPressurePSI (bar)R L1 R L1 R L1

1/2” A/FFEM-20x3.0-050- FCM34-FCM34-CO-CO-•-*-^ 40 116 60 136 80 156 5000 (350)




1” A/FFEM-30x4.0-100- FCM34-FCM34-CO-CO-•-*-^ 60 137 90 167 120 197 4700 (325)


1-1/4” A/FFEM-38x4.0-125- FCM34-FCM34-CO-CO-•-*-^ 76 154 114 192 152 230 4000 (280)











3” A/FFEM-90x5.0-300-FCM34-FCM34-CO-CO-•-*-^ 180 294 270 384 360 474 2800 (193)

COMPLETE ASSEMBLY CONSISTS OF:• FLARE FLANGE 90° ELBOW BODY• TWO (2) FLARE FLANGES • TWO (2) CONES

SAE 3000 PSI Flare Flange Bend Elbow Complete Assembly, Metric SAE J518 Code 61 (ISO 6162-‐1)

A/FFEM Flare Flange Bend Elbow Complete Assembly, Metric R1 Bend Radius

(mm) R2 Bend Radius

(mm) R3 Bend Radius

(mm) Size Complete Assembly

Part No. R L1 R L1 R L1

Assembly WT lbs (kg)


1/2” A/FFEM-‐20x3.0-‐050-‐ FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐^

5000 (350) 1/2” A/FFEM-‐25x3.0-‐050-‐ FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐

^ 5000 (350)

3/4” A/FFEM-‐25x3.0-‐075-‐ FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐^

5000 (350) 3/4” A/FFEM-‐30x3.0-‐075-‐ FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐

^ 5000 (350)

1” A/FFEM-‐30x4.0-‐100-‐ FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐^

4700 (325) 1” A/FFEM-‐38x4.0-‐100-‐ FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐

^ 5000 (350)

1 1/4” A/FFEM-‐38x4.0-‐125-‐ FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐^

4000 (280) 1 1/4” A/FFEM-‐42x4.0-‐125-‐ FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐

^ 4000 (280)



^ 4000 (280)



^ 4000 (280)



^ 4000 (280)



^ 3000 (210)


3000 (210) 3” A/FFEM-‐90x5.0-‐300-‐FCM34-‐FCM34-‐CO-‐CO-‐□-‐*-‐

^2800 (193)

Flange Options: • Standard, FCM34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Clearance Flange.• FT34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) UNC Threaded Flange.• FTM34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Metric Threaded Flange.

Cone Options: • Standard, CO = O-‐Ring Faced Cone.• CF = Flat Faced Cone.

Bend Radius Options (Other radii available, consult factory): • R1• R2• R3



Ordering Example: A/FFEM-‐60x5.0-‐200-‐FCM34-‐FCM34-‐CO-‐CO-‐R1-‐SS-‐V

Flange 1 Option

Flange 2 Option

Cone 1 Option

Cone 2 Option □ Insert Bend Radius

* Insert Material


G54TUBE-MAC.com



Dimensionsin (mm)

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)

Working PressurePSI (bar)L

1-1/2" A/RFE-150-FC34-*-^ 13.00 (330.20) 14.98 (6.80) RFE-150-*-^ 11.50 (5.22) 4000 (280)

2” A/RFE-200-FC34-*-^ 14.50 (368.30) 20.47 (9.30) RFE-200-*-^ 15.59 (7.07) 4000 (280)

2-1/2" A/RFE-250-FC34-*-^ 18.00 (457.20) 35.57 (16.17) RFE-250-*-^ 26.26 (11.91) 3000 (210)

3” A/RFE-300-FC34-*-^ 21.00 (533.40) 59.48 (27.04) RFE-300-*-^ 45.80 (20.77) 3000 (210)

A/RFE - Retain Ring Flange Bend Elbow

Complete Flange Set Includes:• One (1) Retain Ring Flange Bend

Elbow Body • Two (2) Retain Ring Flanges• Two (2) Retain Rings• Two (2) O-Ring Spacers

Flange Options:FC34 = SAE 3000 PSI Code 61 (ISO 6162-1) ClearanceFT34 = SAE 3000 PSI Code 61 (ISO 6162-1) UNC ThreadedFTM34 = SAE 3000 PSI Code 61 (ISO 6162-1) Metric Threaded

*Materials:No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.

^ O-Ring Type:No Designation = Buna Nitrile.V = Viton.

Ordering Example: A/RRFE-200-FC34-SS-V

Flange Option

* Insert Material


SAE 3000 PSI Retain Ring Flange Bend Elbow SAE J518 Code 61 (ISO 6162-1)SAE 3000 PSI Retain Ring Flange Bend Elbow

SAE J518 Code 61 (ISO 6162-1)

A/RFE Flange Bend Elbow – Complete Assembly

Size Complete Assembly Part No.

Dimensions in (mm)

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

Working Pressure PSI (bar) L

1 1/2" A/RFE-150-FC34-*-^ 13.00 (330.20) 14.98 (6.80) RFE-150-*-^ 11.50 (5.22) 4000 (280) 2” A/RFE-200-FC34-*-^ 14.50 (368.30) 20.47 (9.30) RFE-200-*-^ 15.59 (7.07) 4000 (280)

2 1/2" A/RFE-250-FC34-*-^ 18.00 (457.20) 35.57 (16.17) RFE-250-*-^ 26.26 (11.91) 3000 (210) 3” A/RFE-300-FC34-*-^ 21.00 (533.40) 59.48 (27.04) RFE-300-*-^ 45.80 (20.77) 3000 (210)

Flange Option: • Standard, FC34 = SAE 3000 PSI Code 61 (ISO 6162-1) Clearance Flange. • FT34 = SAE 3000 PSI Code 61 (ISO 6162-1) UNC Threaded Flange. • FTM34 = SAE 3000 PSI Code 61 (ISO 6162-1) Metric Threaded Flange.


^ O-Ring Type: • Standard, No Designation = Buna Nitrile.• V = Viton.

Complete Flange Set Includes: • One (1) Retain Ring Flange

Bend Elbow Body • Two (2) Retain Ring Flanges • Two (2) Retain Rings• Two (2) O-Ring Spacers

Ordering Example: A/RFE-200-FC34-SS-V

Flange Option

* Insert Material


TUBE-MAC.comG55


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Retain Ring Flange Elbow Complete AssemblySAE J518 Code 61 (ISO 6162-1)


Dimensionsin (mm)

O-Ring(Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


1/2" A/RRFE-050-FC34-*-^ 2.41 (61.2) OR^-3-909 1.95 (0.88) RRFE-050-*-^ 1.09 (0.49) 5000 (350)

3/4" A/RRFE-075-FC34-*-^ 2.61 (66.2) OR^-3-913 2.83 (1.28) RRFE-075-*-^ 1.93 (0.88) 5000 (350)

1” A/RRFE-100-FC34-*-^ 2.81 (71.4) OR^-3-916 3.36 (1.52) RRFE-100-*-^ 2.10 (0.95) 5000 (350)

1-1/4" A/RRFE-125-FC34-*-^ 3.22 (81.8) OR^-3-918 4.22 (1.91) RRFE-125-*-^ 3.28 (1.45) 4000 (280)

1-1/2" A/RRFE-150-FC34-*-^ 4.01 (101.9) OR^-3-924 8.70 (3.95) RRFE-150-*-^ 6.00 (2.72) 4000 (280)

2” A/RRFE-200-FC34-*-^ 4.40 (111.8) OR^-3-928 11.74 (5.33) RRFE-200-*-^ 7.70 (3.49) 4000 (280)

2-1/2" A/RRFE-250-FC34-*-^ 5.19 (131.9) OR^-2-232 16.30 (7.39) RRFE-250-*-^ 11.30 (5.13) 3000 (210)

A/RRFE - Retain Ring Flange Elbow Complete Assembly

SAE 3000 PSI Retain Ring Flange Elbow Complete Assembly SAE J518 Code 61 (ISO 6162-‐1)

A/RRFE Flange Elbow – Complete Assembly Complete with Buna O-‐Ring

Dimensions in (mm)


L


Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)


1/2" A/RRFE-‐050-‐FC34-‐*-‐^ 2.41 (61.2) OR^-‐3-‐909 1.95 (0.88) RRFE-‐050-‐*-‐^ 1.09 (0.49) 5000 (350) 3/4" A/RRFE-‐075-‐FC34-‐*-‐^ 2.61 (66.2) OR^-‐3-‐913 2.83 (1.28) RRFE-‐075-‐*-‐^ 1.93 (0.88) 5000 (350) 1” A/RRFE-‐100-‐FC34-‐*-‐^ 2.81 (71.4) OR^-‐3-‐916 3.36 (1.52) RRFE-‐100-‐*-‐^ 2.10 (0.95) 5000 (350)

1 1/4" A/RRFE-‐125-‐FC34-‐*-‐^ 3.22 (81.8) OR^-‐3-‐918 4.22 (1.91) RRFE-‐125-‐*-‐^ 3.28 (1.45) 4000 (280) 1 1/2" A/RRFE-‐150-‐FC34-‐*-‐^ 4.01 (101.9) OR^-‐3-‐924 8.70 (3.95) RRFE-‐150-‐*-‐^ 6.00 (2.72) 4000 (280)

2” A/RRFE-‐200-‐FC34-‐*-‐^ 4.40 (111.8) OR^-‐3-‐928 11.74 (5.33) RRFE-‐200-‐*-‐^ 7.70 (3.49) 4000 (280) 2 1/2" A/RRFE-‐250-‐FC34-‐*-‐^ 5.19 (131.9) OR^-‐2-‐232 16.30 (7.39) RRFE-‐250-‐*-‐^ 11.30 (5.13) 3000 (210)

Flange Option: • Standard, FC34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Clearance Flange.• FT34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) UNC Threaded Flange.• FTM34 = SAE 3000 PSI Code 61 (ISO 6162-‐1) Metric Threaded Flange.



Complete Flange Set Includes: • One (1) Flange Elbow• Two (2) Retain Ring Flanges• Two (2) Retain Rings• Two (2) Face O-‐Rings

To be Ordered Separately: • Bolt Kit

See Section

Ordering Example: A/RRFE-‐200-‐FC34-‐SS-‐V

Flange Option

* Insert Material


DRAFT Complete Flange Set Includes:• One (1) Flange Elbow• Two (2) Retain Ring Flanges• Two (2) Retain Rings• Two (2) Face O-Rings

To be Ordered Separately:• Bolt KitSee Section


MaterialsNo Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.


Ordering Example: A/RRFE-200-FC34-SS-V

Flange Option

* Insert Material


G56TUBE-MAC.com


SAE 3000 PSI Block ElbowSAE J518 Code 61 (ISO 6162-1) Flange Style

Materials:Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.

Size Block ElbowPart Number

Dimensions (in) ThreadUNC-2B

WTlbs (kg)

Working Pressure PSI (bar)A B C D E F G H K

1/2” BE34-050-* 0.69 1.50 1.88 0.50 2.00 1.00 2.50 2.50 1.25 5/16”-18 3.30 (1.50) 5000 (350)

3/4” BE34-075-* 0.88 1.88 2.25 0.75 2.00 1.00 3.00 3.25 1.50 3/8”-16 5.00 (2.27) 5000 (350)

1” BE34-100-* 1.03 2.06 2.25 0.94 2.00 1.00 3.00 3.25 1.50 3/8”-16 4.50 (2.04) 5000 (350)

1-1/4” BE34-125-* 1.19 2.31 2.75 1.25 2.25 1.13 3.00 4.00 1.50 7/16”-14 5.70 (2.59) 4000 (280)

1-1/2” BE34-150-* 1.41 2.75 2.75 1.50 2.50 1.25 4.00 4.00 2.00 1/2”-13 8.60 (3.90) 4000 (280)

2” BE34-200-* 1.69 3.06 3.00 1.94 3.00 1.50 4.00 4.50 2.00 1/2”-13 10.60 (4.81) 4000 (280)

2-1/2” BE34-250-* 2.00 3.50 3.25 2.38 3.50 1.75 5.00 5.00 2.50 1/2”-13 17.40 (7.89) 3000 (210)

3” BE34-300-* 2.44 4.19 3.75 2.88 4.00 2.00 5.50 6.00 2.75 5/8”-11 25.60 (11.61) 3000 (210)

BE34 - Block Elbow Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged), NPS

SAE 3000 PSI Block Elbow SAE J518 Code 61 (ISO 6162-‐1) Flange Style

BE34 Block Elbow (NPS) -‐ SAE Code 61 Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged)


Block Elbow Part No.

A B C D E F G H K

Thread UNC-‐2B

WT lbs (kg)


1/2” BE34-‐050-‐* 0.69 1.50 1.88 0.50 2.00 1.00 2.50 2.50 1.25 5/16”-‐18 3.30 (1.50) 5000 (350) 3/4” BE34-‐075-‐* 0.88 1.88 2.25 0.75 2.00 1.00 3.00 3.25 1.50 3/8”-‐16 5.00 (2.27) 5000 (350) 1” BE34-‐100-‐* 1.03 2.06 2.25 0.94 2.00 1.00 3.00 3.25 1.50 3/8”-‐16 4.50 (2.04) 5000 (350)

1 1/4” BE34-‐125-‐* 1.19 2.31 2.75 1.25 2.25 1.13 3.00 4.00 1.50 7/16”-‐14 5.70 (2.59) 4000 (280) 1 1/2” BE34-‐150-‐* 1.41 2.75 2.75 1.50 2.50 1.25 4.00 4.00 2.00 1/2”-‐13 8.60 (3.90) 4000 (280)

2” BE34-‐200-‐* 1.69 3.06 3.00 1.94 3.00 1.50 4.00 4.50 2.00 1/2”-‐13 10.60 (4.81) 4000 (280) 2 1/2” BE34-‐250-‐* 2.00 3.50 3.25 2.38 3.50 1.75 5.00 5.00 2.50 1/2”-‐13 17.40 (7.89) 3000 (210)

3” BE34-‐300-‐* 2.44 4.19 3.75 2.88 4.00 2.00 5.50 6.00 2.75 5/8”-‐11 25.60 (11.61) 3000 (210)

BEM34 Block Elbow (Metric) -‐ SAE Code 61 Flat Face with Threaded Holes Complete with G1/8 Port (Plugged)


Block Elbow Part No.

A B C D E F G H K

Thread WT

lbs (kg) Working Pressure PSI (bar)

1/2” BEM34-‐050-‐* 17.5 38.1 47.8 12.7 50.8 25.4 63.5 63.5 31.8 M8 x 1.25 3.30 (1.50) 5000 (350) 3/4” BEM34-‐075-‐* 22.4 47.8 57.2 19.1 50.8 25.4 76.2 82.6 38.1 M10 x 1.50 5.00 (2.27) 5000 (350) 1”

BEM34-‐100-‐* 26.2 52.3 57.2 23.9 50.8 25.4 76.2 82.6 38.1 M10 x 1.50 4.50 (2.04) 5000 (350) 1 1/4” BEM34-‐125-‐* 30.2 58.7 69.9 31.8 57.2 28.7 76.2 101.6 38.1 M10 x 1.50 5.70 (2.59) 4000 (280) 1 1/2” BEM34-‐150-‐* 35.8 69.9 69.9 38.1 63.5 31.8 101.6 101.6 50.8 M12 x 1.75 8.60 (3.90) 4000 (280)

2”

BEM34-‐200-‐* 42.9 77.7 76.2 49.3 76.2 38.1 101.6 114.3 50.8 M12 x 1.75 10.60 (4.81) 4000 (280) 2 1/2” BEM34-‐250-‐* 50.8 88.9 82.6 60.5 88.9 44.5 127.0 127.0 63.5 M12 x 1.75 17.40 (7.89) 3000 (210)

3”

BEM34-‐300-‐* 62.0 106.4 95.3 73.2 101.6 50.8 139.70

152.4 69.9 M16 x 2.00 25.60 (11.61) 3000 (210) 3* Materials:• Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).• SS = All Stainless Steel, Type 316.

Ordering Example: BE34-‐200-‐SS

* Insert Material

DRAFT

Size Block ElbowPart Number

Dimensions (mm)Thread WT

lbs (kg)

Working Pressure PSI (bar)A B C D E F G H K

1/2” BEM34-050-* 17.5 38.1 47.8 12.7 50.8 25.4 63.5 63.5 31.8 M8 x 1.25 3.30 (1.50) 5000 (350)

3/4” BEM34-075-* 22.4 47.8 57.2 19.1 50.8 25.4 76.2 82.6 38.1 M10 x 1.50 5.00 (2.27) 5000 (350)

1” BEM34-100-* 26.2 52.3 57.2 23.9 50.8 25.4 76.2 82.6 38.1 M10 x 1.50 4.50 (2.04) 5000 (350)

1-1/4” BEM34-125-* 30.2 58.7 69.9 31.8 57.2 28.7 76.2 101.6 38.1 M10 x 1.50 5.70 (2.59) 4000 (280)

1-1/2” BEM34-150-* 35.8 69.9 69.9 38.1 63.5 31.8 101.6 101.6 50.8 M12 x 1.75 8.60 (3.90) 4000 (280)

2” BEM34-200-* 42.9 77.7 76.2 49.3 76.2 38.1 101.6 114.3 50.8 M12 x 1.75 10.60 (4.81) 4000 (280)

2-1/2” BEM34-250-* 50.8 88.9 82.6 60.5 88.9 44.5 127.0 127.0 63.5 M12 x 1.75 17.40 (7.89) 3000 (210)

3” BEM34-300-* 62.0 106.4 95.3 73.2 101.6 50.8 139.70 152.4 69.9 M16 x 2.00 25.60 (11.61) 3000 (210)

BEM34 - Block Elbow Flat Face with Threaded Holes Complete with G1/8 Port (Plugged), Metric

Ordering Example: BE34-200-SS

* Insert Material

TUBE-MAC.comG57


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

SAE 3000 PSI Split Flange Elbow SAE J518 Code 61 (ISO 6162-‐1) Flange Style

A/SFE34 Split Flange Elbow (NPS) Assembly -‐ SAE Code 61 Flat Face with Threaded Holes Complete with Buna O-‐Rings and #4 SAE Port (Plugged)


Complete Assembly Part No. A B C D D1 E F G K L

Thread UNC-2B

O-Ring (Buna)

Part No.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

Working Pressure

PSI (bar) 1/2” A/SFE34-‐050-‐*-‐^ 0.69 1.50 2.50 0.50 0.38 2.00 1.00 2.50 1.25 3.50 5/16”-‐18 OR^-‐2-‐210 3.37 (1.59) SFE34-‐050-‐*-‐^ 2.95 (1.34) 5000 (350) 3/4” A/SFE34-‐075-‐*-‐^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 3.75 3/8”-‐16 OR^-‐2-‐214 4.01 (1.82) SFE34-‐075-‐*-‐^ 3.50 (1.59) 5000 (350) 1” A/SFE34-‐100-‐*-‐^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 3.75 3/8”-‐16 OR^-‐2-‐219 4.05 (1.84) SFE34-‐100-‐*-‐^ 3.40 (1.54) 5000 (350) 1 1/4” A/SFE34-‐125-‐*-‐^ 1.19 2.31 3.13 1.25 1.13 2.25 1.13 3.00 1.50 4.25 7/16”-‐14 OR^-‐2-‐222 5.19 (2.35) SFE34-‐125-‐*-‐^ 4.30 (1.95) 4000 (280) 1 1/2” A/SFE34-‐150-‐*-‐^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 4.50 1/2”-‐13 OR^-‐2-‐225 8.14 (3.69) SFE34-‐150-‐*-‐^ 6.70 (3.04) 4000 (280) 2” A/SFE34-‐200-‐*-‐^ 1.69 3.06 3.50 1.94 1.88 3.00 1.50 4.00 2.00 5.00 1/2”-‐13 OR^-‐2-‐228 10.66 (4.84) SFE34-‐200-‐*-‐^ 9.10 (4.13) 4000 (280) 2 1/2” A/SFE34-‐250-‐*-‐^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 5.75 1/2”-‐13 OR^-‐2-‐232 14.93 (6.77) SFE34-‐250-‐*-‐^ 12.80 (5.81) 3000 (210)

3” A/SFE34-‐300-‐*-‐^ 2.44 4.19 4.50 2.88 2.88 4.00 2.00 5.50 2.75 6.50 5/8”-‐11 OR^-‐2-‐237 24.15 (10.95) SFE34-‐300-‐*-‐^ 20.50 (9.30) 3000 (210)

A/SFEM34 Split Flange Elbow (Metric) Assembly -‐ SAE Code 61 Flat Face with Threaded Holes Complete with Buna O-‐Rings and G1/8 Port (Plugged)



Thread

O-Ring (Buna)

Part No.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

Working Pressure

PSI (bar) 1/2” A/SFEM34-‐050-‐*-‐^ 17.5 38.1 63.5 12.7 9.7 50.8 25.4 63.5 31.8 88.9 M8 x 1.25 OR^-‐2-‐210 3.37 (1.59) SFEM34-‐050-‐*-‐^ 2.95 (1.34) 5000 (350) 3/4” A/SFEM34-‐075-‐*-‐^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 95.3 M10 x 1.50 OR^-‐2-‐214 4.01 (1.82) SFEM34-‐075-‐*-‐^ 3.50 (1.59) 5000 (350) 1” A/SFEM34-‐100-‐*-‐^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 95.3 M10 x 1.50 OR^-‐2-‐219 4.05 (1.84) SFEM34-‐100-‐*-‐^ 3.40 (1.54) 5000 (350) 1 1/4” A/SFEM34-‐125-‐*-‐^ 30.2 58.7 79.5 31.8 28.7 57.2 28.7 76.2 38.1 108.0 M10 x 1.50 OR^-‐2-‐222 5.19 (2.35) SFEM34-‐125-‐*-‐^ 4.30 (1.95) 4000 (280) 1 1/2” A/SFEM34-‐150-‐*-‐^ 35.8 69.9 82.6 38.1 34.9 63.5 31.8 101.6 50.8 114.3 M12 x 1.75 OR^-‐2-‐225 8.14 (3.69) SFEM34-‐150-‐*-‐^ 6.70 (3.04) 4000 (280) 2” A/SFEM34-‐200-‐*-‐^ 42.9 77.7 88.9 49.3 47.8 76.2 38.1 101.6 50.8 127.0 M12 x 1.75 OR^-‐2-‐228 10.66 (4.84) SFEM34-‐200-‐*-‐^ 9.10 (4.13) 4000 (280) 2 1/2” A/SFEM34-‐250-‐*-‐^ 50.8 88.9 101.6 60.5 60.5 88.9 44.5 114.3 57.2 146.1 M12 x 1.75 OR^-‐2-‐232 14.93 (6.77) SFEM34-‐250-‐*-‐^ 12.80 (5.81) 3000 (210)

3” A/SFEM34-‐300-‐*-‐^ 62.0 106.4 114.3 73.2 73.2 101.6 50.8 139.7 69.9 165.1 M16 x 2.00 OR^-‐2-‐237 24.15 (10.95) SFEM34-‐300-‐*-‐^ 20.50 (9.30) 3000 (210) * Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = All Stainless Steel, Type 316. ^ O-‐Ring Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Ordering Example: A/SFE34-‐200-‐SS-‐V

* Insert Material


Complete Flange Set Includes: • One (1) Split Flange Elbow • One (1) Set (2 Halves) Split Flange • One (1) O-‐Ring • One (1) Component Bolt Kit

DRAFT



Ordering Example: A/SFE34-200-SS-V

* Insert Material


SizeComplete Assembly

Part Number

Dimensions (in)ThreadUNC-2B

O-Ring (Buna)

PartNumber

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)

Working Pressure PSI (bar)A B C D D1 E F G K L

1/2” A/SFE34-050-*-^ 0.69 1.50 2.50 0.50 0.38 2.00 1.00 2.50 1.25 3.50 5/16”-18 OR^-2-210 3.37 (1.59) SFE34-050-*-^ 2.95 (1.34) 5000 (350)

3/4” A/SFE34-075-*-^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 3.75 3/8”-16 OR^-2-214 4.01 (1.82) SFE34-075-*-^ 3.50 (1.59) 5000 (350)

1” A/SFE34-100-*-^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 3.75 3/8”-16 OR^-2-219 4.05 (1.84) SFE34-100-*-^ 3.40 (1.54) 5000 (350)

1-1/4” A/SFE34-125-*-^ 1.19 2.31 3.13 1.25 1.13 2.25 1.13 3.00 1.50 4.25 7/16”-14 OR^-2-222 5.19 (2.35) SFE34-125-*-^ 4.30 (1.95) 4000 (280)

1-1/2” A/SFE34-150-*-^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 4.50 1/2”-13 OR^-2-225 8.14 (3.69) SFE34-150-*-^ 6.70 (3.04) 4000 (280)

2” A/SFE34-200-*-^ 1.69 3.06 3.50 1.94 1.88 3.50 1.75 4.00 2.00 5.00 1/2”-13 OR^-2-228 10.66 (4.84) SFE34-200-*-^ 9.10 (4.13) 4000 (280)

2-1/2” A/SFE34-250-*-^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 5.75 1/2”-13 OR^-2-232 14.93 (6.77) SFE34-250-*-^ 12.80 (5.81) 3000 (210)

3” A/SFE34-300-*-^ 2.44 4.19 4.50 2.88 2.88 4.00 2.00 5.50 2.75 6.50 5/8”-11 OR^-2-237 24.15 (10.95) SFE34-300-*-^ 20.50 (9.30) 3000 (210)

SAE 3000 PSI Split Flange Elbow SAE J518 Code 61 (ISO 6162-1) Flange Style

Complete Flange Set Includes:• One (1) Split Flange Elbow• One (1) Set (2 Halves) Split Flange• One (1) O-Ring• One (1) Component Bolt Kit


Part Number

Dimensions (mm)Thread

O-Ring (Buna)

PartNumber

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


1/2” A/SFEM34-050-*-^ 17.5 38.1 63.5 12.7 9.7 50.8 25.4 63.5 31.8 88.9 M8 x 1.25 OR^-2-210 3.37 (1.59) SFEM34-050-*-^ 2.95 (1.34) 5000 (350)

3/4” A/SFEM34-075-*-^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 95.3 M10 x 1.50 OR^-2-214 4.01 (1.82) SFEM34-075-*-^ 3.50 (1.59) 5000 (350)

1” A/SFEM34-100-*-^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 95.3 M10 x 1.50 OR^-2-219 4.05 (1.84) SFEM34-100-*-^ 3.40 (1.54) 5000 (350)

1-1/4” A/SFEM34-125-*-^ 30.2 58.7 79.5 31.8 28.7 57.2 28.7 76.2 38.1 108.0 M10 x 1.50 OR^-2-222 5.19 (2.35) SFEM34-125-*-^ 4.30 (1.95) 4000 (280)

1-1/2” A/SFEM34-150-*-^ 35.8 69.9 82.6 38.1 34.9 63.5 31.8 101.6 50.8 114.3 M12 x 1.75 OR^-2-225 8.14 (3.69) SFEM34-150-*-^ 6.70 (3.04) 4000 (280)

2” A/SFEM34-200-*-^ 42.9 77.7 88.9 49.3 47.8 76.2 38.1 101.6 50.8 127.0 M12 x 1.75 OR^-2-228 10.66 (4.84) SFEM34-200-*-^ 9.10 (4.13) 4000 (280)

2-1/2” A/SFEM34-250-*-^ 50.8 88.9 101.6 60.5 60.5 88.9 44.5 114.3 57.2 146.1 M12 x 1.75 OR^-2-232 14.93 (6.77) SFEM34-250-*-^ 12.80 (5.81) 3000 (210)

3” A/SFEM34-300-*-^ 62.0 106.4 114.3 73.2 73.2 101.6 50.8 139.7 69.9 165.1 M16 x 2.00 OR^-2-237 24.15 (10.95) SFEM34-300-*-^ 20.50 (9.30) 3000 (210)

A/SFE34 - Split Flange Elbow Assembly Flat Face with Threaded Holes Complete with Buna O-Rings and #4 SAE Port (Plugged), NPS

A/SFEM34 - Split Flange Elbow Assembly Flat Face with Threaded Holes Complete with Buna O-Rings and G1/8 Port (Plugged), Metric

G58TUBE-MAC.com


SAE 3000 PSI Flange Tee Complete AssemblySAE J518 Code 61 (ISO 6162-1)


Dimensionsin (mm) O-Ring (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)

Working PressurePSI (bar)L LL

1/2" A/RRFT-050-FC34-*-^ 4.81 (122.2) 2.41 (112.0) OR^-3-909 2.75 (1.25) RRFT-050-*-^ 1.46 (0.66) 5000 (350)

3/4" A/RRFT-075-FC34-*-^ 5.22 (132.6) 2.61 (66.3) OR^-3-913 3.96 (1.50) RRFT-075-*-^ 2.61 (1.18) 5000 (350)

1” A/RRFT-100-FC34-*-^ 5.62 (142.7) 2.81 (71.4) OR^-3-916 4.74 (2.15) RRFT-100-*-^ 2.91 (1.32) 5000 (350)

1-1/4" A/RRFT-125-FC34-*-^ 6.45 (163.8) 3.21 (81.6) OR^-3-918 7.71 (3.50) RRFT-125-*-^ 4.89 (2.22) 4000 (280)

1-1/2" A/RRFT-150-FC34-*-^ 8.02 (183.3) 4.01 (101.9) OR^-3-924 9.48 (4.30) RRFT-150-*-^ 8.10 (3.76) 4000 (280)

2” A/RRFT-200-FC34-*-^ 8.81 (223.8) 4.40 (111.8) OR^-3-928 13.94 (6.32) RRFT-200-*-^ 9.90 (4.44) 4000 (280)

2-1/2" A/RRFT-250-FC34-*-^ 10.38 (263.7) 5.19 (131.8) OR^-2-232 23.55(10.68) RRFT-250-*-^ 15.36 (6.97) 3000 (210)

SAE 3000 PSI Flange Tee Complete Assembly SAE J518 Code 61 (ISO 6162-‐1)

A/RRFT Flange Tee – Complete Assembly Complete with Buna O-‐Ring

Dimensions in (mm)


L LL


Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)


1/2" A/RRFT-‐050-‐FC34-‐*-‐^ 4.81 (122.2) 2.41 (112.0) OR^-‐3-‐909 2.75 (1.25) RRFT-‐050-‐*-‐^ 1.46 (0.66) 5000 (350) 3/4" A/RRFT-‐075-‐FC34-‐*-‐^ 5.22 (132.6) 2.61 (66.3) OR^-‐3-‐913 3.96 (1.50) RRFT-‐075-‐*-‐^ 2.61 (1.18) 5000 (350) 1” A/RRFT-‐100-‐FC34-‐*-‐^ 5.62 (142.7) 2.81 (71.4) OR^-‐3-‐916 4.74 (2.15) RRFT-‐100-‐*-‐^ 2.91 (1.32) 5000 (350)

1 1/4" A/RRFT-‐125-‐FC34-‐*-‐^ 6.45 (163.8) 3.21 (81.6) OR^-‐3-‐918 7.71 (3.50) RRFT-‐125-‐*-‐^ 4.89 (2.22) 4000 (280) 1 1/2" A/RRFT-‐150-‐FC34-‐*-‐^ 8.02 (183.3) 4.01 (101.9) OR^-‐3-‐924 9.48 (4.30) RRFT-‐150-‐*-‐^ 8.10 (3.76) 4000 (280)

2” A/RRFT-‐200-‐FC34-‐*-‐^ 8.81 (223.8) 4.40 (111.8) OR^-‐3-‐928 13.94 (6.32) RRFT-‐200-‐*-‐^ 9.90 (4.44) 4000 (280) 2 1/2" A/RRFT-‐250-‐FC34-‐*-‐^ 10.38 (263.7) 5.19 (131.8) OR^-‐2-‐232 23.55(10.68) RRFT-‐250-‐*-‐^ 15.36 (6.97) 3000 (210)


Complete Flange Set Includes: • One (1) Flange Tee • Three (3) Retain Ring Flanges • Three (3) Retain Rings • Three (3) Face O-‐Rings



Ordering Example: A/RRFT-‐200-‐FC34-‐SS-‐V

Flange Option

* Insert Material


DRAFT Complete Flange Set Includes:• One (1) Flange Tee• Three (3) Retain Ring Flanges• Three (3) Retain Rings• Three (3) Face O-Rings

To be Ordered Separately:• Bolt KitSee Section


Materials:No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.


Ordering Example: A/RRFT-200-FC34-SS-V

Flange Option

* Insert Material


A/RRFT - Flange Tee Complete Assembly Complete with Buna O-Ring

TUBE-MAC.comG59


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Block TeeSAE J518 Code 61 (ISO 6162-1) Flange Style


Size Block TeePart No


WTlbs (kg)

Working PressurePSI (bar)A B C D E F G H K

1/2” BT34-050-* 0.69 1.50 1.88 0.50 2.00 1.00 2.50 2.50 1.25 5/16”-18 3.10 (1.41) 5000 (350)

3/4” BT34-075-* 0.88 1.88 2.25 0.75 2.00 1.00 3.00 3.25 1.50 3/8”-16 4.60 (2.09) 5000 (350)

1” BT34-100-* 1.03 2.06 2.25 0.94 2.00 1.00 3.00 3.25 1.50 3/8”-16 4.30 (1.95) 5000 (350)

1-1/4” BT34-125-* 1.19 2.31 2.75 1.25 2.25 1.13 3.00 4.00 1.50 7/16”-14 5.70 (2.59) 4000 (280)

1-1/2” BT34-150-* 1.41 2.75 2.75 1.50 2.50 1.25 4.00 4.00 2.00 1/2”-13 8.20 (3.72) 4000 (280)

2” BT34-200-* 1.69 3.06 3.00 1.94 3.00 1.50 4.00 4.50 2.00 1/2”-13 10.00 (4.54) 4000 (280)

2-1/2” BT34-250-* 2.00 3.50 3.25 2.38 3.50 1.75 5.00 5.00 2.50 1/2”-13 16.30 (7.39) 3000 (210)

3” BT34-300-* 2.44 4.19 3.75 2.88 4.00 2.00 5.50 6.00 2.75 5/8”-11 23.70 (10.75) 3000 (210)

BT34 - Block Tee Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged), NPS

SAE 3000 PSI Block Tee SAE J518 Code 61 (ISO 6162-‐1) Flange Style

BT34 Block Tee (NPS) -‐ SAE Code 61 Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged)


Block Tee Part No.

A B C D E F G H K

Thread UNC-‐2B

WT lbs (kg)


1/2” BT34-‐050-‐* 0.69 1.50 1.88 0.50 2.00 1.00 2.50 2.50 1.25 5/16”-‐18 3.10 (1.41) 5000 (350) 3/4” BT34-‐075-‐* 0.88 1.88 2.25 0.75 2.00 1.00 3.00 3.25 1.50 3/8”-‐16 4.60 (2.09) 5000 (350) 1” BT34-‐100-‐* 1.03 2.06 2.25 0.94 2.00 1.00 3.00 3.25 1.50 3/8”-‐16 4.30 (1.95) 5000 (350)

1 1/4” BT34-‐125-‐* 1.19 2.31 2.75 1.25 2.25 1.13 3.00 4.00 1.50 7/16”-‐14 5.70 (2.59) 4000 (280) 1 1/2” BT34-‐150-‐* 1.41 2.75 2.75 1.50 2.50 1.25 4.00 4.00 2.00 1/2”-‐13 8.20 (3.72) 4000 (280)

2” BT34-‐200-‐* 1.69 3.06 3.00 1.94 3.00 1.50 4.00 4.50 2.00 1/2”-‐13 10.00 (4.54) 4000 (280) 2 1/2” BT34-‐250-‐* 2.00 3.50 3.25 2.38 3.50 1.75 5.00 5.00 2.50 1/2”-‐13 16.30 (7.39) 3000 (210)

3” BT34-‐300-‐* 2.44 4.19 3.75 2.88 4.00 2.00 5.50 6.00 2.75 5/8”-‐11 23.70 (10.75) 3000 (210)

BTM34 Block Tee (Metric) -‐ ISO6162-‐1 Flat Face with Threaded Holes Complete With G1/8 Port (Plugged)

Dimensions (mm) Size (inch)

Block Tee Part No. A B C D E F G H K Thread

WT lbs (kg)


1/2” BTM34-‐050-‐* 17.5 38.1 47.8 12.7 50.8 25.4 63.5 63.5 31.8 M8 x 1.25 3.10 (1.41) 5000 (350) 3/4” BTM34-‐075-‐* 22.4 47.8 57.2 19.1 50.8 25.4 76.2 82.6 38.1 M10 x 1.50 4.60 (2.09) 5000 (350) 1” BTM34-‐100-‐* 26.2 52.3 57.2 23.9 50.8 25.4 76.2 82.6 38.1 M10 x 1.50 4.30 (1.95) 5000 (350)

1 1/4” BTM34-‐125-‐* 30.2 58.7 69.9 31.8 57.2 28.7 76.2 101.6 38.1 M10 x 1.50 5.70 (2.59) 4000 (280) 1 1/2” BTM34-‐150-‐* 35.8 69.9 69.9 38.1 63.5 31.8 101.6 101.6 50.8 M12 x 1.75 8.20 (3.72) 4000 (280)

2” BTM34-‐200-‐* 42.9 77.7 76.2 49.3 76.2 38.1 101.6 114.3 50.8 M12 x 1.75 10.00 (4.54) 4000 (280) 2 1/2” BTM34-‐250-‐* 50.8 88.9 82.6 60.5 88.9 44.5 127.0 127.0 63.5 M12 x 1.75 16.30 (7.39) 3000 (210)

3” BTM34-‐300-‐* 62.0 106.4 95.3 73.2 101.6 50.8 139.7 152.4 69.9 M16 x 2.00 23.70 (10.75) 3000 (210)

3* Materials:• Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).• SS = All Stainless Steel, Type 316.

Ordering Example: BT34-‐200-‐SS

* Insert Material

DRAFT

Size (inch)

Block TeePart No


lbs (kg)

Working PressurePSI (bar)A B C D E F G H K

1/2” BTM34-050-* 17.5 38.1 47.8 12.7 50.8 25.4 63.5 63.5 31.8 M8 x 1.25 3.10 (1.41) 5000 (350)

3/4” BTM34-075-* 22.4 47.8 57.2 19.1 50.8 25.4 76.2 82.6 38.1 M10 x 1.50 4.60 (2.09) 5000 (350)

1” BTM34-100-* 26.2 52.3 57.2 23.9 50.8 25.4 76.2 82.6 38.1 M10 x 1.50 4.30 (1.95) 5000 (350)

1-1/4” BTM34-125-* 30.2 58.7 69.9 31.8 57.2 28.7 76.2 101.6 38.1 M10 x 1.50 5.70 (2.59) 4000 (280)

1-1/2” BTM34-150-* 35.8 69.9 69.9 38.1 63.5 31.8 101.6 101.6 50.8 M12 x 1.75 8.20 (3.72) 4000 (280)

2” BTM34-200-* 42.9 77.7 76.2 49.3 76.2 38.1 101.6 114.3 50.8 M12 x 1.75 10.00 (4.54) 4000 (280)

2-1/2” BTM34-250-* 50.8 88.9 82.6 60.5 88.9 44.5 127.0 127.0 63.5 M12 x 1.75 16.30 (7.39) 3000 (210)

3” BTM34-300-* 62.0 106.4 95.3 73.2 101.6 50.8 139.7 152.4 69.9 M16 x 2.00 23.70 (10.75) 3000 (210)

Ordering Example: BT34-200-SS

* Insert Material

BTM34 - Block Tee Flat Face with Threaded Holes Complete with G1/8 Port (Plugged), Metric

G60TUBE-MAC.com


SAE 3000 PSI Reducing Branch Block Tee -‐ NPS SAE J518 Code 61 (ISO 6162-‐1) Flange Style

BTR34 Reducing Branch Block Tee (NPS) -‐ SAE Code 61 Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged)

Dimensions (in) Size (run x branch)

Tee Part No. A B C D D1 E F G H K M N

Thread 1 UNC-‐2B

Thread 2 UNC-‐2B

WT lbs (kg)


3/4”x1/2” BTR34-‐075x050-‐* 0.88 1.88 2.25 0.75 0.50 2.00 1.00 3.00 3.25 1.50 0.69 1.50 3/8”-‐16 5/16”-‐18 4.80 (2.18) 5000 (350) 1”x1/2” BTR34-‐100x050-‐* 1.03 2.06 2.25 0.94 0.50 2.00 1.00 3.00 3.25 1.50 0.69 1.50 3/8”-‐16 5/16”-‐18 4.70 (2.13) 5000 (350) 1”x3/4” BTR34-‐100x075-‐* 1.03 2.06 2.25 0.94 0.75 2.00 1.00 3.00 3.25 1.50 0.88 1.88 3/8”-‐16 3/8”-‐16 4.60 (2.09) 5000 (350)

1 1/4”x1/2” BTR34-‐125x050-‐* 1.19 2.31 2.75 1.25 0.50 2.25 1.13 3.00 4.00 1.50 0.69 1.50 7/16”-‐14 5/16”-‐18 5.80 (2.63) 4000 (280) 1 1/4”x3/4” BTR34-‐125x075-‐* 1.19 2.31 2.75 1.25 0.75 2.25 1.13 3.00 4.00 1.50 0.88 1.88 7/16”-‐14 3/8”-‐16 5.80 (2.63) 4000 (280)

1 1/4”x1” BTR34-‐125x100-‐* 1.19 2.31 2.75 1.25 0.94 2.25 1.13 3.00 4.00 1.50 1.03 2.06 7/16”-‐14 3/8”-‐16 5.80 (2.63) 4000 (280)1 1/2”x1/2” BTR34-‐150x050-‐* 1.41 2.75 2.75 1.50 0.50 2.50 1.25 4.00 4.00 2.00 0.69 1.50 1/2”-‐13 5/16”-‐18 9.25 (4.20) 4000 (280)1 1/2”x3/4” BTR34-‐150x075-‐* 1.41 2.75 2.75 1.50 0.75 2.50 1.25 4.00 4.00 2.00 0.88 1.88 1/2”-‐13 3/8”-‐16 9.20 (4.17) 4000 (280)

1 1/2”x1” BTR34-‐150x100-‐* 1.41 2.75 2.75 1.50 0.94 2.50 1.25 4.00 4.00 2.00 1.03 2.06 1/2”-‐13 3/8”-‐16 9.00 (4.08) 4000 (280)1 1/2”x1 1/4” BTR34-‐150x125-‐* 1.41 2.75 2.75 1.50 1.25 2.50 1.25 4.00 4.00 2.00 1.19 2.31 1/2”-‐13 7/16”-‐14 8.65 (3.92) 4000 (280)

2”x1/2” BTR34-‐200x050-‐* 1.69 3.06 3.00 1.94 0.50 3.00 1.50 4.00 4.50 2.00 0.69 1.50 1/2”-‐13 5/16”-‐18 11.70 (5.31) 4000 (280)2”x3/4” BTR34-‐200x075-‐* 1.69 3.06 3.00 1.94 0.75 3.00 1.50 4.00 4.50 2.00 0.88 1.88 1/2”-‐13 3/8”-‐16 11.60 (5.26) 4000 (280)

2”x1” BTR34-‐200x100-‐* 1.69 3.06 3.00 1.94 0.94 3.00 1.50 4.00 4.50 2.00 1.03 2.06 1/2”-‐13 3/8”-‐16 11.60 (5.26) 4000 (280)2”x1 1/4” BTR34-‐200x125-‐* 1.69 3.06 3.00 1.94 1.25 3.00 1.50 4.00 4.50 2.00 1.19 2.31 1/2”-‐13 7/16”-‐14 11.60 (5.26) 4000 (280)2”x1 1/2” BTR34-‐200x150-‐* 1.69 3.06 3.00 1.94 1.50 3.00 1.50 4.00 4.50 2.00 1.41 2.75 1/2”-‐13 1/2”-‐13 11.60 (5.26) 4000 (280)

2 1/2”x1/2” BTR34-‐250x050-‐* 2.00 3.50 3.25 2.38 0.50 3.50 1.75 5.00 5.00 2.50 0.69 1.50 1/2”-‐13 5/16”-‐18 19.40 (8.80) 3000 (210) 2 1/2”x3/4” BTR34-‐250x075-‐* 2.00 3.50 3.25 2.38 0.75 3.50 1.75 5.00 5.00 2.50 0.88 1.88 1/2”-‐13 3/8”-‐16 19.20 (8.71) 3000 (210)

2 1/2”x1” BTR34-‐250x100-‐* 2.00 3.50 3.25 2.38 0.94 3.50 1.75 5.00 5.00 2.50 1.03 2.06 1/2”-‐13 3/8”-‐16 19.00 (8.62) 3000 (210)2 1/2”x1 1/4” BTR34-‐250x125-‐* 2.00 3.50 3.25 2.38 1.25 3.50 1.75 5.00 5.00 2.50 1.19 2.31 1/2”-‐13 7/16”-‐14 18.80 (8.53) 3000 (210)2 1/2”x1 1/2” BTR34-‐250x150-‐* 2.00 3.50 3.25 2.38 1.50 3.50 1.75 5.00 5.00 2.50 1.41 2.75 1/2”-‐13 1/2”-‐13 18.30 (8.30) 3000 (210)

2 1/2”x2” BTR34-‐250x200-‐* 2.00 3.50 3.25 2.38 1.94 3.50 1.75 5.00 5.00 2.50 1.69 3.06 1/2”-‐13 1/2”-‐13 17.56 (7.97) 3000 (210)3”x1/2” BTR34-‐300x050-‐* 2.44 4.19 3.75 2.88 0.50 4.00 2.00 5.50 6.00 2.75 0.69 1.50 5/8”-‐11 5/16”-‐18 28.20 (12.80)

) 3000 (210)

3”x3/4” BTR34-‐300x075-‐* 2.44 4.19 3.75 2.88 0.75 4.00 2.00 5.50 6.00 2.75 0.88 1.88 5/8”-‐11 3/8”-‐16 26.00 (11.79) 3000 (210)3”x1” BTR34-‐300x100-‐* 2.44 4.19 3.75 2.88 0.94 4.00 2.00 5.50 6.00 2.75 1.03 2.06 5/8”-‐11 3/8”-‐16 26.00 (11.79) 3000 (210)

3”x1 1/4” BTR34-‐300x125-‐* 2.44 4.19 3.75 2.88 1.25 4.00 2.00 5.50 6.00 2.75 1.19 2.31 5/8”-‐11 7/16”-‐14 28.13 (12.78) 3000 (210)3”x1 1/2” BTR34-‐300x150-‐* 2.44 4.19 3.75 2.88 1.50 4.00 2.00 5.50 6.00 2.75 1.41 2.75 5/8”-‐11 1/2”-‐13 27.67 (12.55) 3000 (210)

3”x2” BTR34-‐300x200-‐* 2.44 4.19 3.75 2.88 1.94 4.00 2.00 5.50 6.00 2.75 1.69 3.06 5/8”-‐11 1/2”-‐13 26.87 (12.19) 3000 (210)3”x2 1/2” BTR34-‐300x250-‐* 2.44 4.19 3.75 2.88 2.38 4.00 2.00 5.50 6.00 2.75 2.00 3.50 5/8”-‐11 1/2”-‐13 25.30 (11.48) 3000 (210)


Ordering Example: BTR34-‐200x050-‐SS

* Insert Material

DRAFT SAE 3000 PSI Reducing Branch Block Tee - NPSSAE J518 Code 61 (ISO 6162-1) Flange Style

Size(run x

branch)

TeePart Number

Dimensions (in) Thread 1 UNC-2B

Thread 2 UNC-2B

WTlbs (kg)

Working Pressure PSI (bar)A B C D D1 E F G H K M N

3/4”x1/2” BTR34-075x050-* 0.88 1.88 2.25 0.75 0.50 2.00 1.00 3.00 3.25 1.50 0.69 1.50 3/8”-16 5/16”-18 4.80 (2.18) 5000 (350)

1”x1/2” BTR34-100x050-* 1.03 2.06 2.25 0.94 0.50 2.00 1.00 3.00 3.25 1.50 0.69 1.50 3/8”-16 5/16”-18 4.70 (2.13) 5000 (350)

1”x3/4” BTR34-100x075-* 1.03 2.06 2.25 0.94 0.75 2.00 1.00 3.00 3.25 1.50 0.88 1.88 3/8”-16 3/8”-16 4.60 (2.09) 5000 (350)

1-1/4”x1/2” BTR34-125x050-* 1.19 2.31 2.75 1.25 0.50 2.25 1.13 3.00 4.00 1.50 0.69 1.50 7/16”-14 5/16”-18 5.80 (2.63) 4000 (280)

1-1/4”x3/4” BTR34-125x075-* 1.19 2.31 2.75 1.25 0.75 2.25 1.13 3.00 4.00 1.50 0.88 1.88 7/16”-14 3/8”-16 5.80 (2.63) 4000 (280)

1-1/4”x1” BTR34-125x100-* 1.19 2.31 2.75 1.25 0.94 2.25 1.13 3.00 4.00 1.50 1.03 2.06 7/16”-14 3/8”-16 5.80 (2.63) 4000 (280)

1-1/2”x1/2” BTR34-150x050-* 1.41 2.75 2.75 1.50 0.50 2.50 1.25 4.00 4.00 2.00 0.69 1.50 1/2”-13 5/16”-18 9.25 (4.20) 4000 (280)

1-1/2”x3/4” BTR34-150x075-* 1.41 2.75 2.75 1.50 0.75 2.50 1.25 4.00 4.00 2.00 0.88 1.88 1/2”-13 3/8”-16 9.20 (4.17) 4000 (280)

1-1/2”x1” BTR34-150x100-* 1.41 2.75 2.75 1.50 0.94 2.50 1.25 4.00 4.00 2.00 1.03 2.06 1/2”-13 3/8”-16 9.00 (4.08) 4000 (280)

1-1/2”x1-1/4” BTR34-150x125-* 1.41 2.75 2.75 1.50 1.25 2.50 1.25 4.00 4.00 2.00 1.19 2.31 1/2”-13 7/16”-14 8.65 (3.92) 4000 (280)

2”x1/2” BTR34-200x050-* 1.69 3.06 3.00 1.94 0.50 3.00 1.50 4.00 4.50 2.00 0.69 1.50 1/2”-13 5/16”-18 11.70 (5.31) 4000 (280)

2”x3/4” BTR34-200x075-* 1.69 3.06 3.00 1.94 0.75 3.00 1.50 4.00 4.50 2.00 0.88 1.88 1/2”-13 3/8”-16 11.60 (5.26) 4000 (280)

2”x1” BTR34-200x100-* 1.69 3.06 3.00 1.94 0.94 3.00 1.50 4.00 4.50 2.00 1.03 2.06 1/2”-13 3/8”-16 11.60 (5.26) 4000 (280)

2”x1-1/4” BTR34-200x125-* 1.69 3.06 3.00 1.94 1.25 3.00 1.50 4.00 4.50 2.00 1.19 2.31 1/2”-13 7/16”-14 11.60 (5.26) 4000 (280)

2”x1-1/2” BTR34-200x150-* 1.69 3.06 3.00 1.94 1.50 3.00 1.50 4.00 4.50 2.00 1.41 2.75 1/2”-13 1/2”-13 11.60 (5.26) 4000 (280)

2-1/2”x1/2” BTR34-250x050-* 2.00 3.50 3.25 2.38 0.50 3.50 1.75 5.00 5.00 2.50 0.69 1.50 1/2”-13 5/16”-18 19.40 (8.80) 3000 (210)

2-1/2”x3/4” BTR34-250x075-* 2.00 3.50 3.25 2.38 0.75 3.50 1.75 5.00 5.00 2.50 0.88 1.88 1/2”-13 3/8”-16 19.20 (8.71) 3000 (210)

2-1/2”x1” BTR34-250x100-* 2.00 3.50 3.25 2.38 0.94 3.50 1.75 5.00 5.00 2.50 1.03 2.06 1/2”-13 3/8”-16 19.00 (8.62) 3000 (210)

2-1/2”x1-1/4” BTR34-250x125-* 2.00 3.50 3.25 2.38 1.25 3.50 1.75 5.00 5.00 2.50 1.19 2.31 1/2”-13 7/16”-14 18.80 (8.53) 3000 (210)

2-1/2”x1-1/2” BTR34-250x150-* 2.00 3.50 3.25 2.38 1.50 3.50 1.75 5.00 5.00 2.50 1.41 2.75 1/2”-13 1/2”-13 18.30 (8.30) 3000 (210)

2-1/2”x2” BTR34-250x200-* 2.00 3.50 3.25 2.38 1.94 3.50 1.75 5.00 5.00 2.50 1.69 3.06 1/2”-13 1/2”-13 17.56 (7.97) 3000 (210)

3”x1/2” BTR34-300x050-* 2.44 4.19 3.75 2.88 0.50 4.00 2.00 5.50 6.00 2.75 0.69 1.50 5/8”-11 5/16”-18 28.20 (12.80) 3000 (210)

3”x3/4” BTR34-300x075-* 2.44 4.19 3.75 2.88 0.75 4.00 2.00 5.50 6.00 2.75 0.88 1.88 5/8”-11 3/8”-16 26.00 (11.79) 3000 (210)

3”x1” BTR34-300x100-* 2.44 4.19 3.75 2.88 0.94 4.00 2.00 5.50 6.00 2.75 1.03 2.06 5/8”-11 3/8”-16 26.00 (11.79) 3000 (210)

3”x1-1/4” BTR34-300x125-* 2.44 4.19 3.75 2.88 1.25 4.00 2.00 5.50 6.00 2.75 1.19 2.31 5/8”-11 7/16”-14 28.13 (12.78) 3000 (210)

3”x1-1/2” BTR34-300x150-* 2.44 4.19 3.75 2.88 1.50 4.00 2.00 5.50 6.00 2.75 1.41 2.75 5/8”-11 1/2”-13 27.67 (12.55) 3000 (210)

3”x2” BTR34-300x200-* 2.44 4.19 3.75 2.88 1.94 4.00 2.00 5.50 6.00 2.75 1.69 3.06 5/8”-11 1/2”-13 26.87 (12.19) 3000 (210)

3”x2-1/2” BTR34-300x250-* 2.44 4.19 3.75 2.88 2.38 4.00 2.00 5.50 6.00 2.75 2.00 3.50 5/8”-11 1/2”-13 25.30 (11.48) 3000 (210)

BTR34 - Reducing Branch Block Tee Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged), NPS


Ordering Example: BTR34-200x050-SS

* Insert Material

TUBE-MAC.comG61


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Reducing Branch Block Tee - MetricSAE J518 Code 61 (ISO 6162-1) Flange Style

Size(run x

branch)

Block TeePart Number

Dimensions (mm)Thread 1 Thread 2 WT

lbs (kg)

Working Pressure PSI (bar)A B C D D1 E F G H K M N

3/4”x1/2” BTRM34-075x050-* 22.4 47.8 57.2 19.1 12.7 50.8 25.4 76.2 82.6 38.1 17.5 38.1 M10 X 1.50 M8 X 1.25 4.80 (2.18) 5000 (350)

1”x1/2” BTRM34-100x050-* 26.2 52.3 57.2 23.9 12.7 50.8 25.4 76.2 82.6 38.1 17.5 38.1 M10 X 1.50 M8 X 1.25 4.70 (2.13) 5000 (350)

1”x3/4” BTRM34-100x075-* 26.2 52.3 57.2 23.9 19.1 50.8 25.4 76.2 82.6 38.1 22.4 47.8 M10 X 1.50 M10 X 1.50 4.60 (2.09) 5000 (350)

1-1/4”x1/2” BTRM34-125x050-* 30.2 58.7 69.9 31.8 12.7 57.2 28.7 76.2 101.6 38.1 17.5 38.1 M10 X 1.50 M8 X 1.25 5.80 (2.63) 4000 (280)

1-1/4”x3/4” BTRM34-125x075-* 30.2 58.7 69.9 31.8 19.1 57.2 28.7 76.2 101.6 38.1 22.4 47.8 M10 X 1.50 M10 X 1.50 5.80 (2.63) 4000 (280)

1-1/4”x1” BTRM34-125x100-* 30.2 58.7 69.9 31.8 23.9 57.2 28.7 76.2 101.6 38.1 26.2 52.3 M10 X 1.50 M10 X 1.50 5.80 (2.63) 4000 (280)

1-1/2”x1/2” BTRM34-150x050-* 35.8 69.9 69.9 38.1 12.7 63.5 31.8 101.6 101.6 50.8 17.5 38.1 M12 X 1.75 M8 X 1.25 9.25 (4.20) 4000 (280)

1-1/2”x3/4” BTRM34-150x075-* 35.8 69.9 69.9 38.1 19.1 63.5 31.8 101.6 101.6 50.8 22.4 47.8 M12 X 1.75 M10 X 1.50 9.20 (4.17) 4000 (280)

1-1/2”x1” BTRM34-150x100-* 35.8 69.9 69.9 38.1 23.9 63.5 31.8 101.6 101.6 50.8 26.2 52.3 M12 X 1.75 M10 X 1.50 9.00 (4.08) 4000 (280)

1-1/2”x1-1/4” BTRM34-150x125-* 35.8 69.9 69.9 38.1 31.8 63.5 31.8 101.6 101.6 50.8 30.2 58.7 M12 X 1.75 M10 X 1.50 8.65 (3.92) 4000 (280)

2”x1/2” BTRM34-200x050-* 42.9 77.7 76.2 49.3 12.7 76.2 38.1 101.6 114.3 50.8 17.5 38.1 M12 X 1.75 M8 X 1.25 11.70 (5.31) 4000 (280)

2”x3/4” BTRM34-200x075-* 42.9 77.7 76.2 49.3 19.1 76.2 38.1 101.6 114.3 50.8 22.4 47.8 M12 X 1.75 M10 X 1.50 11.60 (5.26) 4000 (280)

2”x1” BTRM34-200x100-* 42.9 77.7 76.2 49.3 23.9 76.2 38.1 101.6 114.3 50.8 26.2 52.3 M12 X 1.75 M10 X 1.50 11.60 (5.26) 4000 (280)

2”x1-1/4” BTRM34-200x125-* 42.9 77.7 76.2 49.3 31.8 76.2 38.1 101.6 114.3 50.8 30.2 58.7 M12 X 1.75 M10 X 1.50 11.60 (5.26) 4000 (280)

2”x1-1/2” BTRM34-200x150-* 42.9 77.7 76.2 49.3 38.1 76.2 38.1 101.6 114.3 50.8 35.8 69.9 M12 X 1.75 M12 X 1.75 11.60 (5.26) 4000 (280)

2-1/2”x1/2” BTRM34-250x050-* 50.8 88.9 82.6 60.5 12.7 88.9 44.5 127.0 127.0 63.5 17.5 38.1 M12 X 1.75 M8 X 1.25 19.40 (8.80) 3000 (210)

2-1/2”x3/4” BTRM34-250x075-* 50.8 88.9 82.6 60.5 19.1 88.9 44.5 127.0 127.0 63.5 22.4 47.8 M12 X 1.75 M10 X 1.50 19.20 (8.71) 3000 (210)

2-1/2”x1” BTRM34-250x100-* 50.8 88.9 82.6 60.5 23.9 88.9 44.5 127.0 127.0 63.5 26.2 52.3 M12 X 1.75 M10 X 1.50 19.00 (8.62) 3000 (210)

2 -1/2”x1-1/4” BTRM34-250x125-* 50.8 88.9 82.6 60.5 31.8 88.9 44.5 127.0 127.0 63.5 30.2 58.7 M12 X 1.75 M10 X 1.50 18.80 (8.53) 3000 (210)

2-1/2”x1-1/2” BTRM34-250x150-* 50.8 88.9 82.6 60.5 38.1 88.9 44.5 127.0 127.0 63.5 35.8 69.9 M12 X 1.75 M12 X 1.75 18.30 (8.30) 3000 (210)

2-1/2”x2” BTRM34-250x200-* 50.8 88.9 82.6 60.5 49.3 88.9 44.5 127.0 127.0 63.5 42.9 77.7 M12 X 1.75 M12 X 1.75 17.56 (7.97) 3000 (210)

3”x1/2” BTRM34-300x050-* 62.0 106.4 95.3 73.2 12.7 101.6 50.8 139.7 152.4 69.9 17.5 38.1 M16 X 2.00 M8 X 1.25 28.20 (12.80) 3000 (210)

3”x3/4” BTRM34-300x075-* 62.0 106.4 95.3 73.2 19.1 101.6 50.8 139.7 152.4 69.9 22.4 47.8 M16 X 2.00 M10 X 1.50 26.00 (11.79) 3000 (210)

3”x1” BTRM34-300x100-* 62.0 106.4 95.3 73.2 23.9 101.6 50.8 139.7 152.4 69.9 26.2 52.3 M16 X 2.00 M10 X 1.50 26.00 (11.79) 3000 (210)

3”x1-1/4” BTRM34-300x125-* 62.0 106.4 95.3 73.2 31.8 101.6 50.8 139.7 152.4 69.9 30.2 58.7 M16 X 2.00 M10 X 1.50 28.13 (12.78) 3000 (210)

3”x1-1/2” BTRM34-300x150-* 62.0 106.4 95.3 73.2 38.1 101.6 50.8 139.7 152.4 69.9 35.8 69.9 M16 X 2.00 M12 X 1.75 27.67 (12.55) 3000 (210)

3”x2” BTRM34-300x200-* 62.0 106.4 95.3 73.2 49.3 101.6 50.8 139.7 152.4 69.9 42.9 77.7 M16 X 2.00 M12 X 1.75 26.87 (12.19) 3000 (210)

3”x2-1/2” BTRM34-300x250-* 62.0 106.4 95.3 73.2 60.5 101.6 50.8 139.7 152.4 69.9 50.8 88.9 M16 X 2.00 M12 X 1.75 25.30 (11.48) 3000 (210)


Ordering Example: BTRM34-200x050-SS

* Insert Material

SAE 3000 PSI Reducing Branch Block Tee -‐ Metric SAE J518 Code 61 (ISO 6162-‐1) Flange Style

BTRM34 Reducing Branch Block Tee (Metric) -‐ ISO 6162-‐1 Flat Face with Thread Holes Complete with G1/8 Port (Plugged)

Dimensions (mm) Size (run x branch)

Block Tee Part No. A B C D D1 E F G H K M N

Thread 1 Thread 2 WT


3/4”x1/2” BTRM34-‐075x050-‐* 22.4 47.8 57.2 19.1 12.7 50.8 25.4 76.2 82.6 38.1 17.5 38.1 M10 X 1.50 M8 X 1.25 4.80 (2.18) 5000 (350) 1”x1/2” BTRM34-‐100x050-‐* 26.2 52.3 57.2 23.9 12.7 50.8 25.4 76.2 82.6 38.1 17.5 38.1 M10 X 1.50 M8 X 1.25 4.70 (2.13) 5000 (350) 1”x3/4” BTRM34-‐100x075-‐* 26.2 52.3 57.2 23.9 19.1 50.8 25.4 76.2 82.6 38.1 22.4 47.8 M10 X 1.50 M10 X 1.50 4.60 (2.09) 5000 (350)

1 1/4”x1/2” BTRM34-‐125x050-‐* 30.2 58.7 69.9 31.8 12.7 57.2 28.7 76.2 101.6 38.1 17.5 38.1 M10 X 1.50 M8 X 1.25 5.80 (2.63) 4000 (280) 1 1/4”x3/4” BTRM34-‐125x075-‐* 30.2 58.7 69.9 31.8 19.1 57.2 28.7 76.2 101.6 38.1 22.4 47.8 M10 X 1.50 M10 X 1.50 5.80 (2.63) 4000 (280)

1 1/4”x1” BTRM34-‐125x100-‐* 30.2 58.7 69.9 31.8 23.9 57.2 28.7 76.2 101.6 38.1 26.2 52.3 M10 X 1.50 M10 X 1.50 5.80 (2.63) 4000 (280)1 1/2”x1/2” BTRM34-‐150x050-‐* 35.8 69.9 69.9 38.1 12.7 63.5 31.8 101.6 101.6 50.8 17.5 38.1 M12 X 1.75 M8 X 1.25 9.25 (4.20) 4000 (280)1 1/2”x3/4” BTRM34-‐150x075-‐* 35.8 69.9 69.9 38.1 19.1 63.5 31.8 101.6 101.6 50.8 22.4 47.8 M12 X 1.75 M10 X 1.50 9.20 (4.17) 4000 (280)

1 1/2”x1” BTRM34-‐150x100-‐* 35.8 69.9 69.9 38.1 23.9 63.5 31.8 101.6 101.6 50.8 26.2 52.3 M12 X 1.75 M10 X 1.50 9.00 (4.08) 4000 (280)1 1/2”x1 1/4” BTRM34-‐150x125-‐* 35.8 69.9 69.9 38.1 31.8 63.5 31.8 101.6 101.6 50.8 30.2 58.7 M12 X 1.75 M10 X 1.50 8.65 (3.92) 4000 (280)

2”x1/2” BTRM34-‐200x050-‐* 42.9 77.7 76.2 49.3 12.7 76.2 38.1 101.6 114.3 50.8 17.5 38.1 M12 X 1.75 M8 X 1.25 11.70 (5.31) 4000 (280)2”x3/4” BTRM34-‐200x075-‐* 42.9 77.7 76.2 49.3 19.1 76.2 38.1 101.6 114.3 50.8 22.4 47.8 M12 X 1.75 M10 X 1.50 11.60 (5.26) 4000 (280)

2”x1” BTRM34-‐200x100-‐* 42.9 77.7 76.2 49.3 23.9 76.2 38.1 101.6 114.3 50.8 26.2 52.3 M12 X 1.75 M10 X 1.50 11.60 (5.26) 4000 (280)2”x1 1/4” BTRM34-‐200x125-‐* 42.9 77.7 76.2 49.3 31.8 76.2 38.1 101.6 114.3 50.8 30.2 58.7 M12 X 1.75 M10 X 1.50 11.60 (5.26) 4000 (280)2”x1 1/2” BTRM34-‐200x150-‐* 42.9 77.7 76.2 49.3 38.1 76.2 38.1 101.6 114.3 50.8 35.8 69.9 M12 X 1.75 M12 X 1.75 11.60 (5.26) 4000 (280)

2 1/2”x1/2” BTRM34-‐250x050-‐* 50.8 88.9 82.6 60.5 12.7 88.9 44.5 127.0 127.0 63.5 17.5 38.1 M12 X 1.75 M8 X 1.25 19.40 (8.80) 3000 (210) 2 1/2”x3/4” BTRM34-‐250x075-‐* 50.8 88.9 82.6 60.5 19.1 88.9 44.5 127.0 127.0 63.5 22.4 47.8 M12 X 1.75 M10 X 1.50 19.20 (8.71) 3000 (210)

2 1/2”x1” BTRM34-‐250x100-‐* 50.8 88.9 82.6 60.5 23.9 88.9 44.5 127.0 127.0 63.5 26.2 52.3 M12 X 1.75 M10 X 1.50 19.00 (8.62) 3000 (210)2 1/2”x1 1/4” BTRM34-‐250x125-‐* 50.8 88.9 82.6 60.5 31.8 88.9 44.5 127.0 127.0 63.5 30.2 58.7 M12 X 1.75 M10 X 1.50 18.80 (8.53) 3000 (210)2 1/2”x1 1/2” BTRM34-‐250x150-‐* 50.8 88.9 82.6 60.5 38.1 88.9 44.5 127.0 127.0 63.5 35.8 69.9 M12 X 1.75 M12 X 1.75 18.30 (8.30) 3000 (210)

2 1/2”x2” BTRM34-‐250x200-‐* 50.8 88.9 82.6 60.5 49.3 88.9 44.5 127.0 127.0 63.5 42.9 77.7 M12 X 1.75 M12 X 1.75 17.56 (7.97) 3000 (210)3”x1/2” BTRM34-‐300x050-‐* 62.0 106.4 95.3 73.2 12.7 101.6 50.8 139.7 152.4 69.9 17.5 38.1 M16 X 2.00 M8 X 1.25 28.20 (12.80)

) 3000 (210)

3”x3/4” BTRM34-‐300x075-‐* 62.0 106.4 95.3 73.2 19.1 101.6 50.8 139.7 152.4 69.9 22.4 47.8 M16 X 2.00 M10 X 1.50 26.00 (11.79) 3000 (210)3”x1” BTRM34-‐300x100-‐* 62.0 106.4 95.3 73.2 23.9 101.6 50.8 139.7 152.4 69.9 26.2 52.3 M16 X 2.00 M10 X 1.50 26.00 (11.79) 3000 (210)

3”x1 1/4” BTRM34-‐300x125-‐* 62.0 106.4 95.3 73.2 31.8 101.6 50.8 139.7 152.4 69.9 30.2 58.7 M16 X 2.00 M10 X 1.50 28.13 (12.78) 3000 (210)3”x1 1/2” BTRM34-‐300x150-‐* 62.0 106.4 95.3 73.2 38.1 101.6 50.8 139.7 152.4 69.9 35.8 69.9 M16 X 2.00 M12 X 1.75 27.67 (12.55) 3000 (210)

3”x2” BTRM34-‐300x200-‐* 62.0 106.4 95.3 73.2 49.3 101.6 50.8 139.7 152.4 69.9 42.9 77.7 M16 X 2.00 M12 X 1.75 26.87 (12.19) 3000 (210)3”x2 1/2” BTRM34-‐300x250-‐* 62.0 106.4 95.3 73.2 60.5 101.6 50.8 139.7 152.4 69.9 50.8 88.9 M16 X 2.00 M12 X 1.75 25.30 (11.48) 3000 (210)


Ordering Example: BTRM34-‐200x050-‐SS

* Insert Material

DRAFT

BTRM34 - Reducing Branch Block Tee Flat Face with Threaded Holes Complete with G1/8 Port (Plugged), Metric

G62TUBE-MAC.com


SAE 3000 PSI Reducing Branch Block Tee ISO 6164/SAE J518 Code 61 (ISO 6162-‐1) Flange Style

BTR7-‐34 Reducing Branch Block Tee (NPS) – ISO 6164/SAE Code 61 Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged)

Dimensions (in) Size (run x branch)

Block Tee Part No. T C D D1 E F G H K M N

Thread 1 UNC-‐2B

Thread 2 UNC-‐2B

WT lbs (kg)


2 1/2”x2” BTR7-‐34-‐250x200-‐* 4.65 4.00 2.38 1.94 5.00 2.50 5.00 6.50 2.50 1.69 3.06 3/4”-‐10 1/2”-‐13 35.60 (16.15) 3000 (210) 3”x2” BTR7-‐34-‐300x200-‐* 5.71 5.00 2.88 1.94 6.00 3.00 6.00 8.00 3.00 1.69 3.06 1”-‐8 1/2”-‐13 63.40 (28.76) 3000 (210) 4”x2” BTR7-‐34-‐400x200-‐* 6.89 5.50 3.50 1.94 7.00 3.50 7.00 9.00 3.50 1.69 3.06 1 1/8”-‐7 1/2”-‐13 97.60 (44.27) 3000 (210)

BTRM7-‐34 Reducing Branch Block Tee (Metric) – ISO 6164/6162-‐1 Flat Face with Threaded Holes Complete with #4 BSP Port (Plugged)

Dimensions (mm) Size (run x branch)

Block Tee Part No. T C D D1 E F G H K M N

Thread 1 Thread 2 WT


2 1/2”x2” BTRM7-‐34-‐250x200-‐* 118.1 101.6 60.5 49.3 127.0 63.5 127.0 165.1 63.5 42.9 77.7 M20 x 2.50 M12 x 1.75 35.60 (16.15) 3000 (210)

3”x2” BTRM7-‐34-‐300x200-‐* 145.0 127.0 73.2 49.3 152.4 76.2 152.4 203.2 76.2 42.9 77.7 M24 x 3.00 M12 x 1.75 63.40 (28.76) 3000 (210)

4”x2” BTRM7-‐34-‐400x200-‐* 175.0 139.7 88.9 49.3 177.8 88.9 177.8 228.6 88.9 42.9 77.7 M30 x 3.50 M12 x 1.75 97.60 (44.27) 3000 (210)


Ordering Example: BTR7-‐34-‐250x200-‐SS

* Insert Material

DRAFT SAE 3000 PSI Reducing Branch Block Tee ISO 6164/SAE J518 Code 61 (ISO 6162-1) Flange Style

Materials:Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.

Size(run x

branch)



Thread 2 UNC-2B

WTlbs (kg)

Working Pressure PSI (bar)T C D D1 E F G H K M N

2-1/2”x2” BTR7-34-250x200-* 4.65 4.00 2.38 1.94 5.00 2.50 5.00 6.50 2.50 1.69 3.06 3/4”-10 1/2”-13 35.60 (16.15) 3000 (210)

3”x2” BTR7-34-300x200-* 5.71 5.00 2.88 1.94 6.00 3.00 6.00 8.00 3.00 1.69 3.06 1”-8 1/2”-13 63.40 (28.76) 3000 (210)

4”x2” BTR7-34-400x200-* 6.89 5.50 3.50 1.94 7.00 3.50 7.00 9.00 3.50 1.69 3.06 1-1/8”-7 1/2”-13 97.60 (44.27) 3000 (210)

Ordering Example: BTR7-34-250x200-SS

* Insert Material

Size(run x

branch)



lbs (kg)

Working Pressure PSI (bar)T C D D1 E F G H K M N

2-1/2”x2” BTRM7-34-250x200-* 118.1 101.6 60.5 49.3 127.0 63.5 127.0 165.1 63.5 42.9 77.7 M20 x 2.50 M12 x 1.75 35.60 (16.15) 3000 (210)

3”x2” BTRM7-34-300x200-* 145.0 127.0 73.2 49.3 152.4 76.2 152.4 203.2 76.2 42.9 77.7 M24 x 3.00 M12 x 1.75 63.40 (28.76) 3000 (210)

4”x2” BTRM7-34-400x200-* 175.0 139.7 88.9 49.3 177.8 88.9 177.8 228.6 88.9 42.9 77.7 M30 x 3.50 M12 x 1.75 97.60 (44.27) 3000 (210)

BTR7-34 - Reducing Branch Block Tee Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged), NPS

BTRM7-34 - Reducing Branch Block Tee Flat Face with Threaded Holes Complete with #4 BSP Port (Plugged), Metric

TUBE-MAC.comG63


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n



Ordering Example: A/SFBT34-200-SS-V

* Insert Material



Part Number


O-Ring (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


1/2” A/SFBT34-050-*-^ 0.69 1.50 2.50 0.50 0.38 2.00 1.00 2.50 1.25 3.50 5/16”-18 OR^-2-210 3.37 (1.53) SFBT34-050-*-^ 2.95 (1.34) 5000 (350)

3/4” A/SFBT34-075-*-^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 3.75 3/8”-16 OR^-2-214 3.81 (1.73) SFBT34-075-*-^ 3.30 (1.50) 5000 (350)

1” A/SFBT34-100-*-^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 3.75 3/8”-16 OR^-2-219 4.03 (1.83) SFBT34-100-*-^ 3.38 (1.53) 5000 (350)

1-1/4” A/SFBT34-125-*-^ 1.19 2.31 3.13 1.25 1.13 2.25 1.13 3.00 1.50 4.25 7/16”-14 OR^-2-222 4.69 (2.13) SFBT34-125-*-^ 3.80 (1.72) 4000 (280)

1-1/2” A/SFBT34-150-*-^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 4.50 1/2”-13 OR^-2-225 7.63 (3.46) SFBT34-150-*-^ 6.19 (2.81) 4000 (280)

2” A/SFBT34-200-*-^ 1.69 3.06 3.50 1.94 1.88 3.00 1.50 4.00 2.00 5.00 1/2”-13 OR^-2-228 9.46 (4.29) SFBT34-200-*-^ 7.90 (3.58) 4000 (280)

2-1/2” A/SFBT34-250-*-^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 5.75 1/2”-13 OR^-2-232 13.43 (6.09) SFBT34-250-*-^ 11.30 (5.13) 3000 (210)

3” A/SFBT34-300-*-^ 2.44 4.19 4.50 2.88 2.88 4.00 2.00 5.50 2.75 6.50 5/8”-11 OR^-2-237 21.35 (9.68) SFBT34-300-*-^ 17.70 (8.03) 3000 (210)


Part Number


O-Ring (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


1/2” A/SFBTM34-050-*-^ 17.5 38.1 63.5 12.7 9.7 50.8 25.4 63.5 31.8 88.9 M8 x 1.25 OR^-2-210 3.37 (1.53) SFBTM34-050-*-^ 2.95 (1.34) 5000 (350)

3/4” A/SFBTM34-075-*-^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 95.3 M10 x 1.50 OR^-2-214 3.81 (1.73) SFBTM34-075-*-^ 3.30 (1.50) 5000 (350)

1” A/SFBTM34-100-*-^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 95.3 M10 x 1.50 OR^-2-219 4.03 (1.83) SFBTM34-100-*-^ 3.38 (1.53) 5000 (350)

1-1/4” A/SFBTM34-125-*-^ 30.2 58.7 79.5 31.8 28.7 57.2 28.7 76.2 38.1 108.0 M10 x 1.50 OR^-2-222 4.69 (2.13) SFBTM34-125-*-^ 3.80 (1.72) 4000 (280)

1-1/2” A/SFBTM34-150-*-^ 35.8 69.9 82.6 38.1 35.1 63.5 31.8 101.6 50.8 114.3 M12 x 1.75 OR^-2-225 7.63 (3.46) SFBTM34-150-*-^ 6.19 (2.81) 4000 (280)

2” A/SFBTM34-200-*-^ 42.9 77.7 88.9 49.3 47.8 76.2 38.1 101.6 50.8 127.0 M12 x 1.75 OR^-2-228 9.46 (4.29) SFBTM34-200-*-^ 7.90 (3.58) 4000 (280)

2-1/2” A/SFBTM34-250-*-^ 50.8 88.9 101.6 60.5 60.5 88.9 44.5 114.3 57.2 146.1 M12 x 1.75 OR^-2-232 13.43 (6.09) SFBTM34-250-*-^11.30 (5.13) 3000 (210)

3” A/SFBTM34-300-*-^ 62.0 106.4 114.3 73.2 73.2 101.6 50.8 139.7 69.9 165.1 M16 x 2.00 OR^-2-237 21.35 (9.68) SFBTM34-300-*-^17.70 (8.03) 3000 (210)

SAE 3000 PSI Split Flange Branch Tee Complete Assembly SAE J518 Code 61 (ISO 6162-1) Flange StyleSAE 3000 PSI Split Flange Branch Tee Complete Assembly

SAE J518 Code 61 (ISO 6162-‐1) Flange Style

A/SFBT34 Split Flange Branch Tee (NPS) Assembly -‐ SAE Code 61 Flat Face with Threaded Holes Complete with Buna O-‐Rings and #4 SAE Port (Plugged)



Thread UNC-2B

O-Ring(Buna) Part No.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

Working Pressure

PSI (bar) 1/2” A/SFBT34-‐050-‐*-‐^ 0.69 1.50 2.50 0.50 0.38 2.00 1.00 2.50 1.25 3.50 5/16”-‐18 OR^-‐2-‐210 3.37 (1.53) SFBT34-‐050-‐*-‐^ 2.95 (1.34) 5000 (350) 3/4” A/SFBT34-‐075-‐*-‐^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 3.75 3/8”-‐16 OR^-‐2-‐214 3.81 (1.73) SFBT34-‐075-‐*-‐^ 3.30 (1.50) 5000 (350) 1” A/SFBT34-‐100-‐*-‐^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 3.75 3/8”-‐16 OR^-‐2-‐219 4.03 (1.83) SFBT34-‐100-‐*-‐^ 3.38 (1.53) 5000 (350)

1 1/4” A/SFBT34-‐125-‐*-‐^ 1.19 2.31 3.13 1.25 1.13 2.25 1.13 3.00 1.50 4.25 7/16”-‐14 OR^-‐2-‐222 4.69 (2.13) SFBT34-‐125-‐*-‐^ 3.80 (1.72) 4000 (280) 1 1/2” A/SFBT34-‐150-‐*-‐^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 4.50 1/2”-‐13 OR^-‐2-‐225 7.63 (3.46) SFBT34-‐150-‐*-‐^ 6.19 (2.81) 4000 (280)

2” A/SFBT34-‐200-‐*-‐^ 1.69 3.06 3.50 1.94 1.88 3.00 1.50 4.00 2.00 5.00 1/2”-‐13 OR^-‐2-‐228 9.46 (4.29) SFBT34-‐200-‐*-‐^ 7.90 (3.58) 4000 (280) 2 1/2” A/SFBT34-‐250-‐*-‐^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 5.75 1/2”-‐13 OR^-‐2-‐232 13.43 (6.09) SFBT34-‐250-‐*-‐^ 11.30 (5.13) 3000 (210)

3” A/SFBT34-‐300-‐*-‐^ 2.44 4.19 4.50 2.88 2.88 4.00 2.00 5.50 2.75 6.50 5/8”-‐11 OR^-‐2-‐237 21.35 (9.68) SFBT34-‐300-‐*-‐^ 17.70 (8.03) 3000 (210)

A/SFBTM34 Split Flange Branch Tee (Metric) Assembly -‐ ISO6162-‐1 Flat Face with Threaded Holes Complete With Buna O-‐Ring and G1/8 Port (Plugged)


Complete Assembly Part No. A B C D D1 E F G K L Thread

O-Ring(Buna) PartNo.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

Working Pressure

PSI (bar) 1/2” A/SFBTM34-‐050-‐*-‐^ 17.5 38.1 63.5 12.7 9.7 50.8 25.4 63.5 31.8 88.9 M8 x 1.25 OR^-‐2-‐210 3.37 (1.53) SFBTM34-‐050-‐*-‐^ 2.95 (1.34) 5000 (350) 3/4” A/SFBTM34-‐075-‐*-‐^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 95.3 M10 x 1.50 OR^-‐2-‐214 3.81 (1.73) SFBTM34-‐075-‐*-‐^ 3.30 (1.50) 5000 (350) 1” A/SFBTM34-‐100-‐*-‐^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 95.3 M10 x 1.50 OR^-‐2-‐219 4.03 (1.83) SFBTM34-‐100-‐*-‐^ 3.38 (1.53) 5000 (350)

1 1/4” A/SFBTM34-‐125-‐*-‐^ 30.2 58.7 79.5 31.8 28.7 57.2 28.7 76.2 38.1 108.0 M10 x 1.50 OR^-‐2-‐222 4.69 (2.13) SFBTM34-‐125-‐*-‐^ 3.80 (1.72) 4000 (280) 1 1/2” A/SFBTM34-‐150-‐*-‐^ 35.8 69.9 82.6 38.1 35.1 63.5 31.8 101.6 50.8 114.3 M12 x 1.75 OR^-‐2-‐225 7.63 (3.46) SFBTM34-‐150-‐*-‐^ 6.19 (2.81) 4000 (280)

2” A/SFBTM34-‐200-‐*-‐^ 42.9 77.7 88.9 49.3 47.8 76.2 38.1 101.6 50.8 127.0 M12 x 1.75 OR^-‐2-‐228 9.46 (4.29) SFBTM34-‐200-‐*-‐^ 7.90 (3.58) 4000 (280) 2 1/2” A/SFBTM34-‐250-‐*-‐^ 50.8 88.9 101.6 60.5 60.5 88.9 44.5 114.3 57.2 146.1 M12 x 1.75 OR^-‐2-‐232 13.43 (6.09) SFBTM34-‐250-‐*-‐^ 11.30 (5.13) 3000 (210)

3” A/SFBTM34-‐300-‐*-‐^ 62.0 106.4 114.3 73.2 73.2 101.6 50.8 139.7 69.9 165.1 M16 x 2.00 OR^-‐2-‐237 21.35 (9.68) SFBTM34-‐300-‐*-‐^ 17.70 (8.03) 3000 (210)



Complete Flange Set Includes: • One (1) Split Flange Tee• One (1) Sets (2 Halves) Split

Flanges • One (1) O-‐Ring• One (1) Component Bolt Kit

Ordering Example: A/SFBT34-‐200-‐SS-‐V

* Insert Material


DRAFT

Complete Flange Set Includes:• One (1) Split Flange Tee• One (1) Sets (2 Halves) Split Flanges• One (1) O-Ring• One (1) Component Bolt Kit

A/SFBT34 - Split Flange Branch Tee Assembly Flat Face with Threaded Holes Complete with Buna O-Rings and #4 SAE Port (Plugged), NPS

A/SFBTM34 - Split Flange Branch Tee Assembly Flat Face with Threaded Holes Complete With Buna O-Ring and G1/8 Port (Plugged), Metric

G64TUBE-MAC.com




Ordering Example: A/SFRT34-200-SS-V

* Insert Material



Part Number


O-Ring (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


1/2” A/SFRT34-050-*-^ 0.69 1.50 2.12 0.50 0.38 2.00 1.00 2.50 1.25 4.00 5/16”-18 OR^-2-210 3.97 (1.80) SFRT34-050-*-^ 3.55 (1.61) 5000 (350)

3/4” A/SFRT34-075-*-^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 5.00 3/8”-16 OR^-2-214 5.81 (2.64) SFRT34-075-*-^ 5.30 (2.41) 5000 (350)

1” A/SFRT34-100-*-^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 5.00 3/8”-16 OR^-2-219 5.85 (2.65) SFRT34-100-*-^ 5.20 (2.36) 5000 (350)

1-1/4” A/SFRT34-125-*-^ 1.19 2.31 3.25 1.25 1.13 2.25 1.13 3.00 1.50 6.00 7/16”-14 OR^-2-222 7.06 (3.20) SFRT34-125-*-^ 6.17 (2.80) 4000 (280)

1-1/2” A/SFRT34-150-*-^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 6.00 1/2”-13 OR^-2-225 11.04 (5.01) SFRT34-150-*-^ 9.60 (4.35) 4000 (280)

2” A/SFRT34-200-*-^ 1.69 3.06 3.50 1.94 1.88 3.00 1.50 4.00 2.00 6.50 1/2”-13 OR^-2-228 13.36 (6.06) SFRT34-200-*-^ 11.80 (5.35) 4000 (280)

2-1/2” A/SFRT34-250-*-^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 7.25 1/2”-13 OR^-2-232 18.33 (8.31) SFRT34-250-*-^ 16.20 (7.35) 3000 (210)

3” A/SFRT34-300-*-^ 2.44 4.19 4.75 2.88 2.88 4.00 2.00 5.50 2.75 8.50 5/8”-11 OR^-2-237 30.66 (13.91) SFRT34-300-*-^ 27.01 (12.25) 3000 (210)


Part Number


O-Ring (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


1/2” A/SFRTM34-050-*-^ 17.5 38.1 53.8 12.7 9.7 50.8 25.4 63.5 31.8 101.6 M8 x 1.25 OR^-2-210 3.97 (1.80) SFRTM34-050-*-^ 3.55 (1.61) 5000 (350)

3/4” A/SFRTM34-075-*-^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 127.0 M10 x 1.50 OR^-2-214 5.81 (2.64) SFRTM34-075-*-^ 5.30 (2.41) 5000 (350)

1” A/SFRTM34-100-*-^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 127.0 M10 x 1.50 OR^-2-219 5.85 (2.65) SFRTM34-100-*-^ 5.20 (2.36) 5000 (350)

1-1/4” A/SFRTM34-125-*-^ 30.2 58.7 82.6 31.8 28.7 57.2 28.7 76.2 38.1 152.4 M10 x 1.50 OR^-2-222 7.06 (3.20) SFRTM34-125-*-^ 6.17 (2.80) 4000 (280)





SAE 3000 PSI Split Flange Run TeeComplete AssemblySAE J518 Code 61 (ISO 6162-1) Flange Style

Complete Flange Set Includes:• One (1) Split Flange Tee• One (1) Sets (2 Halves) Split Flanges• One (1) O-Ring• One (1) Component Bolt Kit

SAE 3000 PSI Split Flange Run Tee Complete Assembly SAE J518 Code 61 (ISO 6162-‐1) Flange Style

A/SFRT34 Split Flange Run Tee (NPS) Assembly -‐ SAE Code 61 Flat Face with Threaded Holes Complete with Buna O-‐Rings and #4 SAE Port (Plugged)



Thread UNC-2B

O-Ring(Buna)

Part No.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

Working Pressure

PSI (bar) 1/2” A/SFRT34-‐050-‐*-‐^ 0.69 1.50 2.12 0.50 0.38 2.00 1.00 2.50 1.25 4.00 5/16”-‐18 OR^-‐2-‐210 3.97 (1.80) SFRT34-‐050-‐*-‐^ 3.55 (1.61) 5000 (350) 3/4” A/SFRT34-‐075-‐*-‐^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 5.00 3/8”-‐16 OR^-‐2-‐214 5.81 (2.64) SFRT34-‐075-‐*-‐^ 5.30 (2.41) 5000 (350) 1” A/SFRT34-‐100-‐*-‐^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 5.00 3/8”-‐16 OR^-‐2-‐219 5.85 (2.65) SFRT34-‐100-‐*-‐^ 5.20 (2.36) 5000 (350) 1 1/4” A/SFRT34-‐125-‐*-‐^ 1.19 2.31 3.25 1.25 1.13 2.25 1.13 3.00 1.50 6.00 7/16”-‐14 OR^-‐2-‐222 7.06 (3.20) SFRT34-‐125-‐*-‐^ 6.17 (2.80) 4000 (280) 1 1/2” A/SFRT34-‐150-‐*-‐^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 6.00 1/2”-‐13 OR^-‐2-‐225 11.04 (5.01) SFRT34-‐150-‐*-‐^ 9.60 (4.35) 4000 (280) 2” A/SFRT34-‐200-‐*-‐^ 1.69 3.06 3.50 1.94 1.88 3.00 1.50 4.00 2.00 6.50 1/2”-‐13 OR^-‐2-‐228 13.36 (6.06) SFRT34-‐200-‐*-‐^ 11.80 (5.35) 4000 (280) 2 1/2” A/SFRT34-‐250-‐*-‐^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 7.25 1/2”-‐13 OR^-‐2-‐232 18.33 (8.31) SFRT34-‐250-‐*-‐^ 16.20 (7.35) 3000 (210)

3” A/SFRT34-‐300-‐*-‐^ 2.44 4.19 4.75 2.88 2.88 4.00 2.00 5.50 2.75 8.50 5/8”-‐11 OR^-‐2-‐237 30.66 (13.91) SFRT34-‐300-‐*-‐^ 27.01 (12.25) 3000 (210)

A/SFRTM34 Split Flange Run Tee (Metric) Assembly -‐ ISO6162-‐1 Flat Face with Threaded Holes Complete with Buna O-‐Ring and G1/8 Port (Plugged)



Thread O-Ring (Buna) PartNo.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)

Working Pressure

PSI (bar) 1/2” A/SFRTM34-‐050-‐*-‐^ 17.5 38.1 53.8 12.7 9.7 50.8 25.4 63.5 31.8 101.6 M8 x 1.25 OR^-‐2-‐210 3.97 (1.80) SFRTM34-‐050-‐*-‐^ 3.55 (1.61) 5000 (350) 3/4” A/SFRTM34-‐075-‐*-‐^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 127.0 M10 x 1.50 OR^-‐2-‐214 5.81 (2.64) SFRTM34-‐075-‐*-‐^ 5.30 (2.41) 5000 (350) 1” A/SFRTM34-‐100-‐*-‐^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 127.0 M10 x 1.50 OR^-‐2-‐219 5.85 (2.65) SFRTM34-‐100-‐*-‐^ 5.20 (2.36) 5000 (350) 1 1/4” A/SFRTM34-‐125-‐*-‐^ 30.2 58.7 82.6 31.8 28.7 57.2 28.7 76.2 38.1 152.4 M10 x 1.50 OR^-‐2-‐222 7.06 (3.20) SFRTM34-‐125-‐*-‐^ 6.17 (2.80) 4000 (280) 1 1/2” A/SFRTM34-‐150-‐*-‐^ 35.8 69.9 82.6 38.1 35.1 63.5 31.8 101.6 50.8 152.4 M12 x 1.75 OR^-‐2-‐225 11.04 (5.01) SFRTM34-‐150-‐*-‐^ 9.60 (4.35) 4000 (280) 2” A/SFRTM34-‐200-‐*-‐^ 42.9 77.7 88.9 49.3 47.8 76.2 38.1 101.6 50.8 165.1 M12 x 1.75 OR^-‐2-‐228 13.36 (6.06) SFRTM34-‐200-‐*-‐^ 11.80 (5.35) 4000 (280) 2 1/2” A/SFRTM34-‐250-‐*-‐^ 50.8 88.9 101.6 60.5 60.5 88.9 44.5 114.3 57.2 184.2 M12 x 1.75 OR^-‐2-‐232 18.33 (8.31) SFRTM34-‐250-‐*-‐^ 16.20 (7.35) 3000 (210) 3” A/SFRTM34-‐300-‐*-‐^ 62.0 106.4 120.7 73.2 73.2 101.6 50.8 139.7 69.9 215.9 M16 x 2.00 OR^-‐2-‐237 30.66 (13.91) SFRTM34-‐300-‐*-‐^ 27.01 (12.25) 3000 (210)



Complete Flange Set Includes: • One (1) Split Flange Tee• One (1) Sets (2 Halves) Split Flanges• One (1) O-‐Ring• One (1) Component Bolt Kit

Ordering Example: A/SFRT34-‐200-‐SS-‐V

* Insert Material


DRAFT

A/SFRT34 - Split Flange Run Tee Assembly Flat Face with Threaded Holes Complete with Buna O-Rings and #4 SAE Port (Plugged), NPS

A/SFRTM34 - Split Flange Run Tee Assembly Flat Face with Threaded Holes Complete with Buna O-Ring and G1/8 Port (Plugged), Metric

TUBE-MAC.comG65


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n



Ordering Example: A/SFT34-200-SS-V

* Insert Material



Part Number


O-Ring (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


1/2” A/SFT34-050-*-^ 0.69 1.50 2.50 0.50 0.38 2.00 1.00 2.50 1.25 5.00 5/16”-18 OR^-2-210 3.51 (1.59) SFT34-050-*-^ 2.67 (1.21) 5000 (350)

3/4” A/SFT34-075-*-^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 5.50 3/8”-16 OR^-2-214 4.82 (2.19) SFT34-075-*-^ 3.80 (1.72) 5000 (350)

1” A/SFT34-100-*-^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 5.50 3/8”-16 OR^-2-219 5.40 (2.45) SFT34-100-*-^ 4.10 (1.86) 5000 (350)

1-1/4” A/SFT34-125-*-^ 1.19 2.31 3.13 1.25 1.13 2.25 1.13 3.00 1.50 6.25 7/16”-14 OR^-2-222 6.63 (3.01) SFT34-125-*-^ 4.85 (2.20) 4000 (280)

1-1/2” A/SFT34-150-*-^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 6.50 1/2”-13 OR^-2-225 10.38 (4.71) SFT34-150-*-^ 7.50 (3.41) 4000 (280)

2” A/SFT34-200-*-^ 1.69 3.06 3.50 1.94 1.88 3.00 1.50 4.00 2.00 7.00 1/2”-13 OR^-2-228 12.72 (5.77) SFT34-200-*-^ 9.60 (4.35) 4000 (280)

2-1/2” A/SFT34-250-*-^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 8.00 1/2”-13 OR^-2-232 19.58 (8.88) SFT34-250-*-^ 15.32 (6.95) 3000 (210)

3” A/SFT34-300-*-^ 2.44 4.19 4.50 2.88 2.88 4.00 2.00 5.50 2.75 9.00 5/8”-11 OR^-2-237 28.40 (12.88) SFT34-300-*-^ 21.10 (9.57) 3000 (210)


Part Number


O-Ring (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


1/2” A/SFTM34-050-*-^ 17.5 38.1 63.5 12.7 9.7 50.8 25.4 63.5 31.8 127.0 M8 x 1.25 OR^-2-210 3.51 (1.59) SFTM34-050-*-^ 2.67 (1.21) 5000 (350)

3/4” A/SFTM34-075-*-^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 139.7 M10 x 1.50 OR^-2-214 4.82 (2.19) SFTM34-075-*-^ 3.80 (1.72) 5000 (350)

1” A/SFTM34-100-*-^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 139.7 M10 x 1.50 OR^-2-219 5.40 (2.45) SFTM34-100-*-^ 4.10 (1.86) 5000 (350)

1-1/4” A/SFTM34-125-*-^ 30.2 58.7 79.5 31.8 28.7 57.2 28.7 76.2 38.1 158.8 M10 x 1.50 OR^-2-222 6.63 (3.01) SFTM34-125-*-^ 4.85 (2.20) 4000 (280)

1-1/2” A/SFTM34-150-*-^ 35.8 69.9 82.6 38.1 34.9 63.5 31.8 101.6 50.8 165.1 M12 x 1.75 OR^-2-225 10.38 (4.71) SFTM34-150-*-^ 7.50 (3.41) 4000 (280)

2” A/SFTM34-200-*-^ 42.9 77.7 88.9 49.3 47.8 76.2 38.1 101.6 50.8 177.8 M12 x 1.75 OR^-2-228 12.72 (5.77) SFTM34-200-*-^ 9.60 (4.35) 4000 (280)

2-1/2” A/SFTM34-250-*-^ 50.8 88.9 101.6 60.5 60.5 88.9 44.5 114.3 57.2 203.2 M12 x 1.75 OR^-2-232 19.58 (8.88) SFTM34-250-*-^ 15.32 (6.95) 3000 (210)

3” A/SFTM34-300-*-^ 62.0 106.4 114.3 73.2 73.2 101.6 50.8 139.7 69.9 228.6 M16 x 2.00 OR^-2-237 28.40 (12.88) SFTM34-300-*-^ 21.10 (9.57) 3000 (210)

SAE 3000 PSI Split Flange TeeComplete AssemblySAE J518 Code 61 (ISO 6162-1) Flange Style

Complete Flange Set Includes:• One (1) Split Flange Tee• Two (2) Sets (4 Halves) Split Flanges• Two (2) O-Rings• Two (2) Component Bolt Kits

SAE 3000 PSI Split Flange Tee Complete Assembly SAE J518 Code 61 (ISO 6162-‐1) Flange Style

A/SFT34 Split Flange Tee (NPS) Assembly -‐ SAE Code 61 Flat Face with Threaded Holes Complete with Buna O-‐Rings and #4 SAE Port (Plugged)



Thread UNC-‐2B

O-‐Ring (Buna)

Part No.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)


1/2” A/SFT34-‐050-‐*-‐^ 0.69 1.50 2.50 0.50 0.38 2.00 1.00 2.50 1.25 5.00 5/16”-‐18 OR^-‐2-‐210 3.51 (1.59) SFT34-‐050-‐*-‐^ 2.67 (1.21) 5000 (350) 3/4” A/SFT34-‐075-‐*-‐^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 5.50 3/8”-‐16 OR^-‐2-‐214 4.82 (2.19) SFT34-‐075-‐*-‐^ 3.80 (1.72) 5000 (350) 1” A/SFT34-‐100-‐*-‐^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 5.50 3/8”-‐16 OR^-‐2-‐219 5.40 (2.45) SFT34-‐100-‐*-‐^ 4.10 (1.86) 5000 (350)

1 1/4” A/SFT34-‐125-‐*-‐^ 1.19 2.31 3.13 1.25 1.13 2.25 1.13 3.00 1.50 6.25 7/16”-‐14 OR^-‐2-‐222 6.63 (3.01) SFT34-‐125-‐*-‐^ 4.85 (2.20) 4000 (280) 1 1/2” A/SFT34-‐150-‐*-‐^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 6.50 1/2”-‐13 OR^-‐2-‐225 10.38 (4.71) SFT34-‐150-‐*-‐^ 7.50 (3.41) 4000 (280)

2” A/SFT34-‐200-‐*-‐^ 1.69 3.06 3.50 1.94 1.88 3.00 1.50 4.00 2.00 7.00 1/2”-‐13 OR^-‐2-‐228 12.72 (5.77) SFT34-‐200-‐*-‐^ 9.60 (4.35) 4000 (280) 2 1/2” A/SFT34-‐250-‐*-‐^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 8.00 1/2”-‐13 OR^-‐2-‐232 19.58 (8.88) SFT34-‐250-‐*-‐^ 15.32 (6.95) 3000 (210)

3” A/SFT34-‐300-‐*-‐^ 2.44 4.19 4.50 2.88 2.88 4.00 2.00 5.50 2.75 9.00 5/8”-‐11 OR^-‐2-‐237 28.40 (12.88) SFT34-‐300-‐*-‐^ 21.10 (9.57) 3000 (210)

30.66A/SFTM34 Split Flange Tee (Metric) Assembly -‐ ISO 6162-‐1 Flat Face with Threaded Holes Complete with Buna O-‐Rings and G1/8 Port (Plugged)



Thread O-‐Ring (Buna)

Part No.

Assembly WT

lbs (kg)

Body Only Part No.

WT lbs (kg)


1/2” A/SFTM34-‐050-‐*-‐^ 17.5 38.1 63.5 12.7 9.7 50.8 25.4 63.5 31.8 127.0

M8 x 1.25 OR^-‐2-‐210 3.51 (1.59) SFTM34-‐050-‐*-‐^ 2.67 (1.21) 5000 (350) 3/4” A/SFTM34-‐075-‐*-‐^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 139.

7 M10 x 1.50 OR^-‐2-‐214 4.82 (2.19) SFTM34-‐075-‐*-‐^ 3.80 (1.72) 5000 (350)

1” A/SFTM34-‐100-‐*-‐^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 139.7

M10 x 1.50 OR^-‐2-‐219 5.40 (2.45) SFTM34-‐100-‐*-‐^ 4.10 (1.86) 5000 (350) 1 1/4” A/SFTM34-‐125-‐*-‐^ 30.2 58.7 79.5 31.8 28.7 57.2 28.7 76.2 38.1 158.

8 M10 x 1.50 OR^-‐2-‐222 6.63 (3.01) SFTM34-‐125-‐*-‐^ 4.85 (2.20) 4000 (280)

1 1/2” A/SFTM34-‐150-‐*-‐^ 35.8 69.9 82.6 38.1 34.9 63.5 31.8 101.6

50.8 165.1

M12 x 1.75 OR^-‐2-‐225 10.38 (4.71) SFTM34-‐150-‐*-‐^ 7.50 (3.41) 4000 (280) 2” A/SFTM34-‐200-‐*-‐^ 42.9 77.7 88.9 49.3 47.8 76.2 38.1 101.

6 50.8 177.

8 M12 x 1.75 OR^-‐2-‐228 12.72 (5.77) SFTM34-‐200-‐*-‐^ 9.60 (4.35) 4000 (280)

2 1/2” A/SFTM34-‐250-‐*-‐^ 50.8 88.9 101.6

60.5 60.5 88.9 44.5 114.3

57.2 203.2

M12 x 1.75 OR^-‐2-‐232 19.58 (8.88) SFTM34-‐250-‐*-‐^ 15.32 (6.95) 3000 (210) 3” A/SFTM34-‐300-‐*-‐^ 62.0 106.

4 114.3

73.2 73.2 101.6

50.8 139.7

69.9 228.6

M16 x 2.00 OR^-‐2-‐237 28.40 (12.88) SFTM34-‐300-‐*-‐^ 21.10 (9.57) 3000 (210)



Ordering Example: A/SFT34-‐200-‐SS-‐V

* Insert Material


Complete Flange Set Includes: • One (1) Split Flange Tee• Two (2) Sets (4 Halves) Split Flanges• Two (2) O-‐Rings• Two (2) Component Bolt Kits

DRAFT SAE 3000 PSI Split Flange Tee Complete Assembly SAE J518 Code 61 (ISO 6162-‐1) Flange Style

A/SFT34 Split Flange Tee (NPS) Assembly -‐ SAE Code 61 Flat Face with Threaded Holes Complete with Buna O-‐Rings and #4 SAE Port (Plugged)



Thread UNC-‐2B

O-‐Ring (Buna)

Part No.

Assembly WT

lbs (kg)

Body Only Part No.

Body Only WT

lbs (kg)


1/2” A/SFT34-‐050-‐*-‐^ 0.69 1.50 2.50 0.50 0.38 2.00 1.00 2.50 1.25 5.00 5/16”-‐18 OR^-‐2-‐210 3.51 (1.59) SFT34-‐050-‐*-‐^ 2.67 (1.21) 5000 (350) 3/4” A/SFT34-‐075-‐*-‐^ 0.88 1.88 2.75 0.75 0.63 2.00 1.00 3.00 1.50 5.50 3/8”-‐16 OR^-‐2-‐214 4.82 (2.19) SFT34-‐075-‐*-‐^ 3.80 (1.72) 5000 (350) 1” A/SFT34-‐100-‐*-‐^ 1.03 2.06 2.75 0.94 0.88 2.00 1.00 3.00 1.50 5.50 3/8”-‐16 OR^-‐2-‐219 5.40 (2.45) SFT34-‐100-‐*-‐^ 4.10 (1.86) 5000 (350)

1 1/4” A/SFT34-‐125-‐*-‐^ 1.19 2.31 3.13 1.25 1.13 2.25 1.13 3.00 1.50 6.25 7/16”-‐14 OR^-‐2-‐222 6.63 (3.01) SFT34-‐125-‐*-‐^ 4.85 (2.20) 4000 (280) 1 1/2” A/SFT34-‐150-‐*-‐^ 1.41 2.75 3.25 1.50 1.38 2.50 1.25 4.00 2.00 6.50 1/2”-‐13 OR^-‐2-‐225 10.38 (4.71) SFT34-‐150-‐*-‐^ 7.50 (3.41) 4000 (280)

2” A/SFT34-‐200-‐*-‐^ 1.69 3.06 3.50 1.94 1.88 3.00 1.50 4.00 2.00 7.00 1/2”-‐13 OR^-‐2-‐228 12.72 (5.77) SFT34-‐200-‐*-‐^ 9.60 (4.35) 4000 (280) 2 1/2” A/SFT34-‐250-‐*-‐^ 2.00 3.50 4.00 2.38 2.38 3.50 1.75 4.50 2.25 8.00 1/2”-‐13 OR^-‐2-‐232 19.58 (8.88) SFT34-‐250-‐*-‐^ 15.32 (6.95) 3000 (210)

3” A/SFT34-‐300-‐*-‐^ 2.44 4.19 4.50 2.88 2.88 4.00 2.00 5.50 2.75 9.00 5/8”-‐11 OR^-‐2-‐237 28.40 (12.88) SFT34-‐300-‐*-‐^ 21.10 (9.57) 3000 (210)

30.66A/SFTM34 Split Flange Tee (Metric) Assembly -‐ ISO 6162-‐1 Flat Face with Threaded Holes Complete with Buna O-‐Rings and G1/8 Port (Plugged)



Thread

O-‐Ring (Buna)

Part No.

Assembly WT

lbs (kg)

Body Only Part No.

WT lbs (kg)


1/2” A/SFTM34-‐050-‐*-‐^ 17.5 38.1 63.5 12.7 9.7 50.8 25.4 63.5 31.8 127.0

M8 x 1.25 OR^-‐2-‐210 3.51 (1.59) SFTM34-‐050-‐*-‐^ 2.67 (1.21) 5000 (350) 3/4” A/SFTM34-‐075-‐*-‐^ 22.4 47.8 69.9 19.1 16.0 50.8 25.4 76.2 38.1 139.

7 M10 x 1.50 OR^-‐2-‐214 4.82 (2.19) SFTM34-‐075-‐*-‐^ 3.80 (1.72) 5000 (350)

1” A/SFTM34-‐100-‐*-‐^ 26.2 52.3 69.9 23.9 22.4 50.8 25.4 76.2 38.1 139.7

M10 x 1.50 OR^-‐2-‐219 5.40 (2.45) SFTM34-‐100-‐*-‐^ 4.10 (1.86) 5000 (350) 1 1/4” A/SFTM34-‐125-‐*-‐^ 30.2 58.7 79.5 31.8 28.7 57.2 28.7 76.2 38.1 158.

8 M10 x 1.50 OR^-‐2-‐222 6.63 (3.01) SFTM34-‐125-‐*-‐^ 4.85 (2.20) 4000 (280)

1 1/2” A/SFTM34-‐150-‐*-‐^ 35.8 69.9 82.6 38.1 34.9 63.5 31.8 101.6

50.8 165.1

M12 x 1.75 OR^-‐2-‐225 10.38 (4.71) SFTM34-‐150-‐*-‐^ 7.50 (3.41) 4000 (280) 2” A/SFTM34-‐200-‐*-‐^ 42.9 77.7 88.9 49.3 47.8 76.2 38.1 101.

6 50.8 177.

8 M12 x 1.75 OR^-‐2-‐228 12.72 (5.77) SFTM34-‐200-‐*-‐^ 9.60 (4.35) 4000 (280)

2 1/2” A/SFTM34-‐250-‐*-‐^ 50.8 88.9 101.6

60.5 60.5 88.9 44.5 114.3

57.2 203.2

M12 x 1.75 OR^-‐2-‐232 19.58 (8.88) SFTM34-‐250-‐*-‐^ 15.32 (6.95) 3000 (210) 3” A/SFTM34-‐300-‐*-‐^ 62.0 106.

4 114.3

73.2 73.2 101.6

50.8 139.7

69.9 228.6

M16 x 2.00 OR^-‐2-‐237 28.40 (12.88) SFTM34-‐300-‐*-‐^ 21.10 (9.57) 3000 (210) * Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = All Stainless Steel, Type 316. ^ O-‐Ring Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Ordering Example: A/SFT34-‐200-‐SS-‐V

* Insert Material


Complete Flange Set Includes: • One (1) Split Flange Tee • Two (2) Sets (4 Halves) Split Flanges • Two (2) O-‐Rings • Two (2) Component Bolt Kits

DRAFT

A/SFT34 - Split Flange Run Tee Assembly Flat Face with Threaded Holes Complete with Buna O-Rings and #4 SAE Port (Plugged), NPS

A/SFTM34 - Split Flange Tee Assembly Flat Face with Threaded Holes Complete with Buna O-Rings and G1/8 Port (Plugged), Metric

G66TUBE-MAC.com




Ordering Example: TPO6-34-200-SS-V

* Insert Material


Size Transition Plate Part Number

Dimensions (in) C’TBore Bolt

Thread 1 UNC-2B

O-Ring (Buna)

Part Number

WTlbs (kg)

Working Pressure PSI (bar)A B C D E G H K M N

1/2” TPO6-34-050-*-^ 0.69 1.50 1.25 0.50 1.00 2.50 2.50 1.50 0.72 1.60 5/16” 5/16”-18 OR^-2-210 1.40 (0.64) 5000 (350)

3/4” TPO6-34-075-*-^ 0.88 1.88 1.50 0.75 1.00 3.00 3.00 1.75 0.94 2.00 3/8” 3/8”-16 OR^-2-214 2.00 (0.91) 5000 (350)

1” TPO6-34-100-*-^ 1.03 2.06 1.50 0.94 1.00 3.00 3.00 1.50 1.10 2.24 7/16” 3/8”-16 OR^-2-219 1.90 (0.86) 5000 (350)

1-1/4” TPO6-34-125-*-^ 1.19 2.31 2.00 1.25 1.25 3.00 4.00 1.50 1.24 2.62 1/2” 7/16”-14 OR^-2-222 3.59 (1.63) 4000 (275)

1-1/2” TPO6-34-150-*-^ 1.41 2.75 2.25 1.50 1.25 4.00 4.50 2.00 1.44 3.13 31/32” 1/2”-13 OR^-2-225 4.56 (2.07) 3000 (210)

2” TPO6-34-200-*-^ 1.69 3.06 2.75 1.94 1.75 4.00 5.50 2.00 1.75 3.81 3/4” 1/2”-13 OR^-2-228 7.40 (3.36) 3000 (210)

TPO6-34 - Transition Plate O-Ring Face with Counterbored Holes Complete with Buna O-Ring and #4 SAE Port (Plugged), NPS

TPOM6-34 - Transition Plate O-Ring Face with Counterbored Hole Complete with Buna O-Ring and G1/8 Port (Plugged), Metric

SAE 3000 PSI Transition Plate SAE J518 Code 62/Code 61 (ISO 6162-2/6162-1) Flange Manifold Mount Style

SAE 3000 PSI Transition Plate SAE J518 Code 62/Code 61 (ISO 6162-‐2/6162-‐1) Flange Manifold Mount Style

TPO6-‐34 Transition Plate (NPS) -‐ SAE Code 62/61 O-‐Ring Face with Countersunk Holes Complete with Buna O-‐Ring and #4 SAE Port (Plugged)


Transition Plate Part No.

A B C D E G H K M N

C’T Bore Bolt

Thread 1 UNC-2B

O-Ring(Buna)

Part No.

WT lbs (kg)

Working Pressure PSI

(bar) 1/2” TPO6-‐34-‐050-‐*-‐^ 0.69 1.50 1.25 0.50 1.00 2.50 2.50 1.50 0.72 1.60 5/16” 5/16”-‐18 OR^-‐2-‐210 1.40 (0.64) 5000 (350)

3/4” TPO6-‐34-‐075-‐*-‐^ 0.88 1.88 1.50 0.75 1.00 3.00 3.00 1.75 0.94 2.00 3/8” 3/8”-‐16 OR^-‐2-‐214 2.00 (0.91) 5000 (350)

1” TPO6-‐34-‐100-‐*-‐^ 1.03 2.06 1.50 0.94 1.00 3.00 3.00 1.50 1.10 2.24 7/16” 3/8”-‐16 OR^-‐2-‐219 1.90 (0.86) 5000 (350)

1 1/4” TPO6-‐34-‐125-‐*-‐^ 1.19 2.31 2.00 1.25 1.25 3.00 4.00 1.50 1.24 2.62 1/2” 7/16”-‐14 OR^-‐2-‐222 3.59 (1.63) 4000 (275)

1 1/2” TPO6-‐34-‐150-‐*-‐^ 1.41 2.75 2.25 1.50 1.25 4.00 4.50 2.00 1.44 3.13 31/32” 1/2”-‐13 OR^-‐2-‐225 4.56 (2.07) 3000 (210)

2” TPO6-‐34-‐200-‐*-‐^ 1.69 3.06 2.75 1.94 1.75 4.00 5.50 2.00 1.75 3.81 3/4” 1/2”-‐13 OR^-‐2-‐228 7.40 (3.36) 3000 (210)

TPOM6-‐34 Transition Plate (Metric) -‐ ISO6162-‐2/6162-‐1 ‘O’ Ring Face with Countersunk Hole Complete with Buna O-‐Ring and G1/8 Port (Plugged)

Dimensions (millimeters) Size (inch)


A B C D E G H K M N

C’T Bore Thread

O-Ring(Buna)

Part No.

WT lbs (kg)


(bar) 1/2” TPOM6-‐34-‐050-‐*-‐^ 17.5 38.1 31.8 12.7 25.4 63.5 63.5 38.1 18.3 40.6 M8 M8 x 1.25 OR^-‐2-‐210 1.40 (0.64) 5000 (350)

3/4” TPOM6-‐34-‐075-‐*-‐^ 22.4 47.8 38.1 19.1 25.4 76.2 76.2 44.5 23.9 50.8 M10 M10 x 1.50 OR^-‐2-‐214 2.00 (0.91) 5000 (350)

1” TPOM6-‐34-‐100-‐*-‐^ 26.2 52.3 38.1 23.9 25.4 76.2 76.2 38.1 27.9 56.9 M12 M10 x 1.50 OR^-‐2-‐219 1.90 (0.86) 5000 (350)

1 1/4” TPOM6-‐34-‐125-‐*-‐^ 30.2 58.7 50.8 31.8 31.8 76.2 101.6 38.1 31.5 66.5 M12 M10 x 1.50 OR^-‐2-‐222 3.59 (1.63) 4000 (275)

1 1/2” TPOM6-‐34-‐150-‐*-‐^ 35.8 69.9 57.2 38.1 31.8 101.6 114.3 50.8 36.6 79.5 M16 M12 x 1.75 OR^-‐2-‐225 4.56 (2.07) 3000 (210)

2” TPOM6-‐34-‐200-‐*-‐^ 42.9 77.7 69.9 49.3 44.5 101.6 139.7 50.8 44.5 96.8 M20 M12 x 1.75 OR^-‐2-‐228 7.40 (3.36) 3000 (210)



Ordering Example: TPO6-‐34-‐200-‐SS-‐V

* Insert Material


DRAFT


Dimensions (mm) C’TBoreBolt

Thread 1O-Ring (Buna)

Part Number

WTlbs (kg)

Working Pressure PSI (bar)A B C D E G H K M N

1/2” TPOM6-34-050-*-^ 17.5 38.1 31.8 12.7 25.4 63.5 63.5 38.1 18.3 40.6 M8 M8 x 1.25 OR^-2-210 1.40 (0.64) 5000 (350)

3/4” TPOM6-34-075-*-^ 22.4 47.8 38.1 19.1 25.4 76.2 76.2 44.5 23.9 50.8 M10 M10 x 1.50 OR^-2-214 2.00 (0.91) 5000 (350)

1” TPOM6-34-100-*-^ 26.2 52.3 38.1 23.9 25.4 76.2 76.2 38.1 27.9 56.9 M12 M10 x 1.50 OR^-2-219 1.90 (0.86) 5000 (350)

1-1/4” TPOM6-34-125-*-^ 30.2 58.7 50.8 31.8 31.8 76.2 101.6 38.1 31.5 66.5 M12 M10 x 1.50 OR^-2-222 3.59 (1.63) 4000 (275)

1-1/2” TPOM6-34-150-*-^ 35.8 69.9 57.2 38.1 31.8 101.6 114.3 50.8 36.6 79.5 M16 M12 x 1.75 OR^-2-225 4.56 (2.07) 3000 (210)

2” TPOM6-34-200-*-^ 42.9 77.7 69.9 49.3 44.5 101.6 139.7 50.8 44.5 96.8 M20 M12 x 1.75 OR^-2-228 7.40 (3.36) 3000 (210)

TUBE-MAC.comG67


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n* Materials:Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.


Ordering Example: TPO7-34-250-SS-V

* Insert Material




Thread UNC-2B

O-Ring (Buna)

Part Number

WTlbs (kg)


(bar)A B C D E H T

2-1/2” TPO7-34-250-*-^ 2.00 3.50 2.50 2.38 1.50 5.00 4.65 3/4” 1/2”-13 OR^-2-232 5.50 (2.49) 2500 (175)

3” TPO7-34-300-*-^ 2.44 4.19 3.00 2.88 1.75 6.00 5.71 1” 5/8”-11 OR^-2-237 10.85 (4.92) 2000 (140)

TPO7-34 - Transition Plate O-Ring Face with Counterbored Holes Complete with Buna O-Ring and #4 SAE Port (Plugged), NPS

SAE 3000 PSI Transition Plate ISO 6164/SAE Code 61 (ISO6164/6162-1) Flange Manifold Mount StyleSAE 3000 PSI Transition Plate ISO 6164/SAE Code 61 (ISO6164/6162-‐1) Flange Manifold Mount Style

TPO7-‐34 Transition Plate (NPS) -‐ ISO 6164/SAE Code 61 O-‐Ring Face with Countersunk Holes Complete with Buna O-‐Ring and #4 SAE Port (Plugged)



A B C D E H T C’T

Bore Bolt

Thread UNC-2B

O-Ring(Buna)

Part No.

WT lbs (kg)


2 1/2” TPO7-‐34-‐250-‐*-‐^ 2.00 3.50 2.50 2.38 1.50 5.00 4.65 3/4” 1/2”-‐13 OR^-‐2-‐232 5.50 (2.49) 2500 (175)

3” TPO7-‐34-‐300-‐*-‐^ 2.44 4.19 3.00 2.88 1.75 6.00 5.71 1” 5/8”-‐11 OR^-‐2-‐237 10.85 (4.92) 2000 (140)

TPOM7-‐34 Transition Plate (Metric) -‐ ISO6164/6162-‐1 ‘O’ Ring Face with Countersunk Holes Complete with Buna O-‐Ring and G1/8 Port (Plugged)



A B C D E H T C’T

Bore Thread O-Ring(Buna)

Part No.

WT lbs (kg)


2 1/2” TPOM7-‐34-‐250-‐*-‐^ 50.8 88.9 63.5 60.5 31.8 127.0 118.1 M20 M12 x 1.75 OR^-‐2-‐232 5.50 (2.49) 2500 (175)

3” TPOM7-‐34-‐300-‐*-‐^ 62.0 106.4 76.2 73.2 44.5 152.4 145.0 M24 M16 x 2.00 OR^-‐2-‐237 10.85 (4.92) 2000 (140)



Ordering Example: TPO7-‐34-‐250-‐SS-‐V

* Insert Material


DRAFT



ThreadO-Ring (Buna)

Part Number

WTlbs (kg)


(bar)A B C D E H T

2-1/2” TPOM7-34-250-*-^ 50.8 88.9 63.5 60.5 31.8 127.0 118.1 M20 M12 x 1.75 OR^-2-232 5.50 (2.49) 2500 (175)

3” TPOM7-34-300-*-^ 62.0 106.4 76.2 73.2 44.5 152.4 145.0 M24 M16 x 2.00 OR^-2-237 10.85 (4.92) 2000 (140)

TPOM7-34 - Transition Plate O-Ring Face with Counterbored Holes Complete with Buna O-Ring and G1/8 Port (Plugged), Metric

G68TUBE-MAC.com



Size(SAE Code 62 x SAE Code 61)

ReducerPart Number


Thread 2 UNC-2B

WTlbs (kg)

Working Pressure PSI (bar)A B C D D1 E G H K M N

3/4” x 1/2” TPR6-34-075x050-* 0.69 1.50 1.25 0.75 0.50 1.00 2.50 3.00 1.25 0.94 2.00 3/8”-16 5/16”-18 1.87 (0.85) 5000 (350)

1” x 1/2” TPR6-34-100x050-* 0.69 1.50 1.50 0.94 0.50 1.50 3.00 3.00 1.50 1.09 2.25 7/16”-14 5/16”-18 3.42 (1.55) 5000 (350)

1” x 3/4” TPR6-34-100x075-* 0.88 1.88 1.50 0.94 0.75 1.25 3.00 3.00 1.50 1.09 2.25 7/16”-14 3/8”-16 2.70 (1.22) 5000 (350)

1-1/4” x 3/4” TPR6-34-125x075-* 0.88 1.88 1.50 1.25 0.75 1.50 3.00 3.50 1.50 1.25 2.62 1/2”-13 3/8”-16 3.80 (1.72) 5000 (350)

1-1/4” x 1” TPR6-34-125x100-* 1.03 2.06 1.50 1.25 0.94 1.25 3.00 3.50 1.50 1.25 2.62 1/2”-13 3/8”-16 3.00 (1.36) 5000 (350)

1-1/2” x 1” TPR6-34-150x100-* 1.03 2.06 1.50 1.50 0.94 1.50 3.00 4.00 1.50 1.44 3.13 5/8”-11 3/8”-16 4.10 (1.86) 5000 (350)

1-1/2” x 1-1/4” TPR6-34-150x125-* 1.19 2.31 2.00 1.50 1.25 1.50 4.00 4.00 2.00 1.44 3.13 5/8”-11 7/16”-14 55.50 (2.49) 4000 (280)

2” x 1-1/4” TPR6-34-200x125-* 1.19 2.31 2.00 1.94 1.25 1.75 4.00 5.00 2.00 1.76 3.82 3/4”-10 7/16”-14 8.27 (3.75) 4000 (280)

2” x 1-1/2” TPR6-34-200x150-* 1.41 2.75 2.50 1.94 1.50 1.50 5.00 5.00 2.50 1.75 3.81 3/4”-10 1/2”-13 8.93 (4.05) 4000 (280)

SAE 3000 PSI Transition Plate Reducer SAE J518 Code 62/Code 61 (ISO 6162-2/6162-1) Flange Union Style SAE 3000 PSI Transition Plate Reducer SAE J518 Code 62/Code 61 (ISO 6162-‐2/6162-‐1) Flange Union Style

TPR6-‐34 Transition Plate Reducer (NPS) -‐ SAE Code 62/Code 61 Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged)

Dimensions (in) Size (SAE Code 62 x SAE Code 61)

Reducer Part No.

A B C D D1 E G H K M N

Thread 1 UNC-2B

Thread 2 UNC-2B

WT lbs (kg)


3/4” x 1/2” TPR6-‐34-‐075x050-‐*

0.69 1.50 1.25 0.75 0.50 1.00 2.50 3.00 1.25 0.94 2.00 3/8”-‐16 5/16”-‐18 1.87 (0.85) 5000 (350)

1” x 1/2” TPR6-‐34-‐100x050-‐*

0.69 1.50 1.50 0.94 0.50 1.50 3.00 3.00 1.50 1.09 2.25 7/16”-‐14 5/16”-‐18 3.42 (1.55) 5000 (350)

1” x 3/4” TPR6-‐34-‐100x075-‐*

0.88 1.88 1.50 0.94 0.75 1.25 3.00 3.00 1.50 1.09 2.25 7/16”-‐14 3/8”-‐16 2.70 (1.22) 5000 (350)

1 1/4” x 3/4” TPR6-‐34-‐125x075-‐*

0.88 1.88 1.50 1.25 0.75 1.50 3.00 3.50 1.50 1.25 2.62 1/2”-‐13 3/8”-‐16 3.80 (1.72) 5000 (350)

1 1/4” x 1” TPR6-‐34-‐125x100-‐*

1.03 2.06 1.50 1.25 0.94 1.25 3.00 3.50 1.50 1.25 2.62 1/2”-‐13 3/8”-‐16 3.00 (1.36) 5000 (350)

1 1/2” x 1” TPR6-‐34-‐150x100-‐*

1.03 2.06 1.50 1.50 0.94 1.50 3.00 4.00 1.50 1.44 3.13 5/8”-‐11 3/8”-‐16 4.10 (1.86) 5000 (350)

1 1/2” x 1 1/4” TPR6-‐34-‐150x125-‐*

1.19 2.31 2.00 1.50 1.25 1.50 4.00 4.00 2.00 1.44 3.13 5/8”-‐11 7/16”-‐14 55.50 (2.49) 4000 (280)

2” x 1 1/4” TPR6-‐34-‐200x125-‐*

1.19 2.31 2.00 1.94 1.25 1.75 4.00 5.00 2.00 1.76 3.82 3/4”-‐10 7/16”-‐14 8.27 (3.75) 4000 (280)

2” x 1 1/2” TPR6-‐34-‐200x150-‐*

1.41 2.75 2.50 1.94 1.50 1.50 5.00 5.00 2.50 1.75 3.81 3/4”-‐10 1/2”-‐13 8.93 (4.05) 4000 (280)

TPRM6-‐34 Transition Plate Reducer (Metric) -‐ ISO 6162-‐2/6162-‐1 Flat Face with Threaded Holes Complete with G1/8 Port (Plugged)

Dimensions (mm) Size (ISO 6162-2 x ISO 6162-1)

Reducer Part No.

A B C D D1 E G H K M N Thread 1 Thread 2

WT lbs (kg)

Working

Pressure PSI (bar)

3/4” x 1/2” TPRM6-‐34-‐075x050-‐* 17.5 38.1 31.8 19.1 12.7 25.4 63.5 76.2 31.8 23.9 50.8 M10 x 1.50 M8 x 1.25 1.87 (0.85) 5000 (350)

1” x 1/2” TPRM6-‐34-‐100x050-‐* 17.5 38.1 38.1 23.9 12.7 38.1 76.2 76.2 38.1 27.7 57.2 M12 x 1.75 M8 x 1.25 3.42 (1.55) 5000 (350)

1” x 3/4” TPRM6-‐34-‐100x075-‐* 22.4 47.8 38.1 23.9 19.1 31.8 76.2 76.2 38.1 27.7 57.2 M12 x 1.75 M10 x 1.50 2.70 (1.22) 5000 (350)

1 1/4” x 3/4” TPRM6-‐34-‐125x075-‐* 22.4 47.8 38.1 31.8 19.1 38.1 76.2 88.9 38.1 31.8 66.5 M12 x 1.75 M10 x 1.50 3.80 (1.72) 5000 (350)

1 1/4” x 1” TPRM6-‐34-‐125x100-‐* 26.2 52.3 38.1 31.8 23.9 31.8 76.2 88.9 38.1 31.8 66.5 M12 x 1.75 M10 x 1.50 3.00 (1.36) 5000 (350)

1 1/2” x 1” TPRM6-‐34-‐150x100-‐* 26.2 52.3 38.1 38.1 23.9 38.1 76.2 101.6 38.1 36.6 79.5 M16 x 2.00 M10 x 1.50 4.10 (1.86) 5000 (350)

1 1/2” x 1 1/4” TPRM6-‐34-‐150x125-‐* 30.2 58.7 50.8 38.1 31.8 38.1 101.6 101.6 50.8 36.6 79.5 M16 x 2.00 M10 x 1.50 55.50 (2.49) 4000 (280)

2” x 1 1/4” TPRM6-‐34-‐200x125-‐* 30.2 58.7 50.8 49.3 31.8 44.5 101.6 127.0 50.8 44.7 97.0 M20 x 2.50 M10 x 1.50 8.27 (3.75) 4000 (280)

2” x 1 1/2” TPRM6-‐34-‐200x150-‐* 35.8 69.9 63.5 49.3 38.1 38.1 127.0 127.0 63.5 44.5 96.8 M20 x 2.50 M12 x 1.75 8.93 (4.05) 4000 (280)


Ordering Example: TPR6-‐34-‐200x125-‐SS

* Insert Material

DRAFT

Size(ISO 6162-2 xISO 6162-1)

ReducerPart Number


lbs (kg)


3/4” x 1/2” TPRM6-34-075x050-* 17.5 38.1 31.8 19.1 12.7 25.4 63.5 76.2 31.8 23.9 50.8 M10 x 1.50 M8 x 1.25 1.87 (0.85) 5000 (350)

1” x 1/2” TPRM6-34-100x050-* 17.5 38.1 38.1 23.9 12.7 38.1 76.2 76.2 38.1 27.7 57.2 M12 x 1.75 M8 x 1.25 3.42 (1.55) 5000 (350)

1” x 3/4” TPRM6-34-100x075-* 22.4 47.8 38.1 23.9 19.1 31.8 76.2 76.2 38.1 27.7 57.2 M12 x 1.75 M10 x 1.50 2.70 (1.22) 5000 (350)

1-1/4” x 3/4” TPRM6-34-125x075-* 22.4 47.8 38.1 31.8 19.1 38.1 76.2 88.9 38.1 31.8 66.5 M12 x 1.75 M10 x 1.50 3.80 (1.72) 5000 (350)

1-1/4” x 1” TPRM6-34-125x100-* 26.2 52.3 38.1 31.8 23.9 31.8 76.2 88.9 38.1 31.8 66.5 M12 x 1.75 M10 x 1.50 3.00 (1.36) 5000 (350)

1-1/2” x 1” TPRM6-34-150x100-* 26.2 52.3 38.1 38.1 23.9 38.1 76.2 101.6 38.1 36.6 79.5 M16 x 2.00 M10 x 1.50 4.10 (1.86) 5000 (350)

1-1/2” x 1-1/4” TPRM6-34-150x125-* 30.2 58.7 50.8 38.1 31.8 38.1 101.6 101.6 50.8 36.6 79.5 M16 x 2.00 M10 x 1.50 55.50 (2.49) 4000 (280)

2” x 1-1/4” TPRM6-34-200x125-* 30.2 58.7 50.8 49.3 31.8 44.5 101.6 127.0 50.8 44.7 97.0 M20 x 2.50 M10 x 1.50 8.27 (3.75) 4000 (280)

2” x 1-1/2” TPRM6-34-200x150-* 35.8 69.9 63.5 49.3 38.1 38.1 127.0 127.0 63.5 44.5 96.8 M20 x 2.50 M12 x 1.75 8.93 (4.05) 4000 (280)

Ordering Example: TPR6-34-200x125-SS

* Insert Material

TPR6-34 - Transition Plate Reducer Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged), NPS

TPRM6-34 - Transition Plate Reducer Flat Face with Threaded Holes Complete with G1/8 Port (Plugged), Metric

TUBE-MAC.comG69


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Transition Plate Reducer ISO 6164/SAE Code 61 (ISO6164/6162-1) Flange Union Style


Size(ISO 6164 x

SAE Code 61)

ReducerPart Number


Thread 2 UNC-2B

WTlbs (kg)

Working PressurePSI (bar)T A B C D D1 E H

2-1/2” x 1-1/2” TPR7-34-250x150-* 4.65 1.41 2.75 2.50 2.38 1.50 1.75 5.00 3/4”-10 1/2”-13 10.40 (4.72) 3000 (210)

2-1/2” x 2” TPR7-34-250x200-* 4.65 1.69 3.06 2.50 2.38 1.94 1.75 5.00 3/4”-10 1/2”-13 10.30 (4.67) 3000 (210)

3” x 2” TPR7-34-300x200-* 5.71 1.69 3.06 3.00 2.88 1.94 2.00 6.00 1”-8 1/2”-13 16.50 (7.48) 3000 (210)

3” x 2-1/2” TPR7-34-300x250-* 5.71 2.00 3.50 3.00 2.88 2.38 2.00 6.00 1”-8 1/2”-13 15.50 (7.03) 2500 (175)

4” x 2-1/2” TPR7-34-400x250-* 6.89 2.00 3.50 3.50 3.50 2.38 2.00 7.00 1-1/8”-7 1/2”-13 22.70 (10.30) 2500 (175)

4” x 3” TPR7-34-400x300-* 6.89 2.44 4.19 3.50 3.50 2.88 2.00 7.00 1-1/8”-7 5/8”-11 22.20 (10.07) 2000 (140)

SAE 3000 PSI Transition Plate Reducer ISO 6164/SAE Code 61 (ISO6164/6162-‐1) Flange Union Style

TPR7-‐34 Transition Plate Reducer (NPS) -‐ ISO 6164/SAE Code 61 Flat Face with Threaded Holes Complete With #4 SAE Port (Plugged)

Dimensions (in) Size (ISO 6164 x SAE Code 61)

Reducer Part No.

T A B C D D1 E H

Thread 1 UNC-‐2B

Thread 2 UNC-‐2B

WT lbs (kg)


(bar)

2 1/2” x 1 1/2” TPR7-‐34-‐250x150-‐* 4.65 1.41 2.75 2.50 2.38 1.50 1.75 5.00 3/4”-‐10 1/2”-‐13 10.40 (4.72) 3000 (210)

2 1/2” x 2” TPR7-‐34-‐250x200-‐* 4.65 1.69 3.06 2.50 2.38 1.94 1.75 5.00 3/4”-‐10 1/2”-‐13 10.30 (4.67) 3000 (210)

3” x 2” TPR7-‐34-‐300x200-‐* 5.71 1.69 3.06 3.00 2.88 1.94 2.00 6.00 1”-‐8 1/2”-‐13 16.50 (7.48) 3000 (210)

3” x 2 1/2” TPR7-‐34-‐300x250-‐* 5.71 2.00 3.50 3.00 2.88 2.38 2.00 6.00 1”-‐8 1/2”-‐13 15.50 (7.03) 2500 (175)

4” x 2 1/2” TPR7-‐34-‐400x250-‐* 6.89 2.00 3.50 3.50 3.50 2.38 2.00 7.00 1 1/8”-‐7 1/2”-‐13 22.70 (10.30) 2500 (175)

4” x 3” TPR7-‐34-‐400x300-‐* 6.89 2.44 4.19 3.50 3.50 2.88 2.00 7.00 1 1/8”-‐7 5/8”-‐11 22.20 (10.07) 2000 (140)

TPRM7-‐34 Transition Plate Reducer (Metric) -‐ ISO6164/6162-‐1 Flat Face with Threaded Holes Complete with G1/8 Port (Plugged)

Dimensions (mm) Size (ISO 6164 x ISO 6162-‐1)

Reducer Part No.

T A B C D D1 E H Thread 1 Thread 2 WT

lbs (kg) Working

Pressure PSI (bar)

2 1/2” x 1 1/2” TPRM7-‐34-‐250x150-‐* 118.1 35.8 69.9 63.5 60.5 38.1 44.5 127.0 M20 x 2.50 M12 x 1.75 10.40 (4.72) 3000 (210)

2 1/2” x 2” TPRM7-‐34-‐250x200-‐* 118.1 42.9 77.7 63.5 60.5 49.3 44.5 127.0 M20 x 2.50 M12 x 1.75 10.30 (4.67) 3000 (210)

3” x 2” TPRM7-‐34-‐300x200-‐* 145.0 42.9 77.7 76.2 73.2 49.3 50.8 152.4 M24 x 3.00 M12 x 1.75 16.50 (7.48) 3000 (210)

3” x 2 1/2” TPRM7-‐34-‐300x250-‐* 145.0 50.8 88.9 76.2 73.2 60.5 50.8 152.4 M24 x 3.00 M12 x 1.75 15.50 (7.03) 2500 (175)

4” x 2 1/2” TPRM7-‐34-‐400x250-‐* 175.0 50.8 88.9 88.9 88.9 60.5 50.8 177.8 M30 x 3.50 M12 x 1.75 22.70 (10.30) 2500 (175)

4” x 3” TPRM7-‐34-‐400x300-‐* 175.0 62.0 106.4 88.9 88.9 73.2 50.8 177.8 M30 x 3.50 M16 x 2.00 22.20 (10.07) 2000 (140)


Ordering Example: TPR7-‐34-‐250x150-‐SS

* Insert Material

DRAFT

Ordering Example: TPR7-34-250x150-SS

* Insert Material

Size(ISO 6164 xISO 6162-1)

ReducerPart Number

Dimensions (mm) Thread1

Thread2

WTlbs (kg)


2-1/2” x 1-1/2” TPRM7-34-250x150-* 118.1 35.8 69.9 63.5 60.5 38.1 44.5 127.0 M20 x 2.50 M12 x 1.75 10.40 (4.72) 3000 (210)

2-1/2” x 2” TPRM7-34-250x200-* 118.1 42.9 77.7 63.5 60.5 49.3 44.5 127.0 M20 x 2.50 M12 x 1.75 10.30 (4.67) 3000 (210)

3” x 2” TPRM7-34-300x200-* 145.0 42.9 77.7 76.2 73.2 49.3 50.8 152.4 M24 x 3.00 M12 x 1.75 16.50 (7.48) 3000 (210)

3” x 2-1/2” TPRM7-34-300x250-* 145.0 50.8 88.9 76.2 73.2 60.5 50.8 152.4 M24 x 3.00 M12 x 1.75 15.50 (7.03) 2500 (175)

4” x 2-1/2” TPRM7-34-400x250-* 175.0 50.8 88.9 88.9 88.9 60.5 50.8 177.8 M30 x 3.50 M12 x 1.75 22.70 (10.30) 2500 (175)

4” x 3” TPRM7-34-400x300-* 175.0 62.0 106.4 88.9 88.9 73.2 50.8 177.8 M30 x 3.50 M16 x 2.00 22.20 (10.07) 2000 (140)

TPR7-34 - Transition Plate Reducer Flat Face with Threaded Holes Complete With #4 SAE Port (Plugged), NPS

TPRM7-34 - Transition Plate Reducer Flat Face with Threaded Holes Complete with G1/8 Port (Plugged), Metric

G70TUBE-MAC.com



Size ReducerPart Number


Thread 2 UNC-2B

WTlbs (kg)


3/4” x 1/2” TPR34-075x050-* 0.69 1.50 1.69 0.75 0.50 1.00 3.00 3.00 1.50 0.88 1.88 3/8”-16 5/16”-18 2.50 (1.59) 5000 (350)

1” x 1/2” TPR34-100x050-* 0.69 1.50 1.50 0.94 0.50 1.50 3.00 3.00 1.50 1.03 2.06 3/8”-16 5/16”-18 3.44 (1.56) 5000 (350)

1” x 3/4” TPR34-100x075-* 0.88 1.88 1.50 0.94 0.75 1.50 3.00 3.00 1.50 1.03 2.06 3/8”-16 3/8”-16 3.30 (1.50) 5000 (350)

1-1/4” x 3/4” TPR34-125x075-* 0.88 1.88 1.50 1.25 0.75 1.50 3.00 3.00 1.50 1.19 2.31 7/16”-14 3/8”-16 3.20 (1.45) 5000 (350)

1-1/4” x 1” TPR34-125x100-* 1.03 2.06 1.50 1.25 0.94 1.25 3.00 3.00 1.50 1.19 2.31 7/16”-14 3/8”-16 2.60 (1.18) 5000 (350)

1-1/2” x 1” TPR34-150x100-* 1.03 2.06 2.00 1.50 0.94 1.50 3.00 4.00 1.50 1.41 2.75 1/2”-13 3/8”-16 4.26 (1.93) 5000 (350)

1-1/2” x 1-1/4” TPR34-150x125-* 1.19 2.31 2.00 1.50 1.25 1.50 3.00 4.00 1.50 1.41 2.75 1/2”-13 7/16”-14 4.20 (1.91) 4000 (280)

2” x 1-1/4” TPR34-200x125-* 1.19 2.31 2.00 1.94 1.25 1.75 3.00 4.00 1.50 1.69 3.06 1/2”-13 7/16”-14 4.70 (2.13) 4000 (280)

2” x 1-1/2” TPR34-200x150-* 1.41 2.75 2.00 1.94 1.50 1.75 4.00 4.00 2.00 1.69 3.06 1/2”-13 1/2”-13 6.40 (2.91) 4000 (280)

2-1/2” x 1-1/2” TPR34-250x150-* 1.41 2.75 2.50 2.38 1.50 2.00 4.00 5.00 2.00 2.00 3.50 1/2”-13 1/2”-13 8.90 (4.04) 4000 (280)

2-1/2” x 2” TPR34-250x200-* 1.69 3.06 2.50 2.38 1.94 1.75 4.00 5.00 2.00 2.00 3.50 1/2”-13 1/2”-13 7.65 (3.47) 4000 (280)

3” x 2” TPR34-300x200-* 1.69 3.06 3.00 2.88 1.94 2.00 4.00 6.00 2.00 2.44 4.19 5/8”-11 1/2”-13 10.60 (4.81) 4000 (280)

3” x 2-1/2” TPR34-300x250-* 2.00 3.50 3.00 2.88 2.38 1.75 4.50 6.00 2.25 2.44 4.19 5/8”-11 1/2”-13 10.10 (4.58) 3000 (210)

TPR34 - Transition Plate Reducer Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged), NPS

SAE 3000 PSI Transition Plate Reducer - NPS SAE J518 Code 61 (ISO 6162-1) Flange StyleSAE 3000 PSI Transition Plate Reducer -‐ NPS SAE J518 Code 61 (ISO 6162-‐1) Flange Style

TPR34 Transition Plate Reducer (NPS) -‐ SAE Code 61 Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged)


Reducer Part No.


Thread 1 UNC-2B

Thread 2 UNC-2B

WT lbs (kg)


(bar) 3/4” x 1/2” TPR34-‐075x050-‐* 0.69 1.50 1.69 0.75 0.50 1.00 3.00 3.00 1.50 0.88 1.88 3/8”-‐16 5/16”-‐18 2.50 (1.59) 5000 (350)

1” x 1/2” TPR34-‐100x050-‐* 0.69 1.50 1.50 0.94 0.50 1.50 3.00 3.00 1.50 1.03 2.06 3/8”-‐16 5/16”-‐18 3.44 (1.56) 5000 (350)

1” x 3/4” TPR34-‐100x075-‐* 0.88 1.88 1.50 0.94 0.75 1.50 3.00 3.00 1.50 1.03 2.06 3/8”-‐16 3/8”-‐16 3.30 (1.50) 5000 (350)

1 1/4” x 3/4” TPR34-‐125x075-‐* 0.88 1.88 1.50 1.25 0.75 1.50 3.00 3.00 1.50 1.19 2.31 7/16”-‐14 3/8”-‐16 3.20 (1.45) 5000 (350)

1 1/4” x 1” TPR34-‐125x100-‐* 1.03 2.06 1.50 1.25 0.94 1.25 3.00 3.00 1.50 1.19 2.31 7/16”-‐14 3/8”-‐16 2.60 (1.18) 5000 (350)

1 1/2” x 1” TPR34-‐150x100-‐* 1.03 2.06 2.00 1.50 0.94 1.50 3.00 4.00 1.50 1.41 2.75 1/2”-‐13 3/8”-‐16 4.26 (1.93) 5000 (350)

1 1/2” x 1 1/4” TPR34-‐150x125-‐* 1.19 2.31 2.00 1.50 1.25 1.50 3.00 4.00 1.50 1.41 2.75 1/2”-‐13 7/16”-‐14 4.20 (1.91) 4000 (280)

2” x 1 1/4” TPR34-‐200x125-‐* 1.19 2.31 2.00 1.94 1.25 1.75 3.00 4.00 1.50 1.69 3.06 1/2”-‐13 7/16”-‐14 4.70 (2.13) 4000 (280)

2” x 1 1/2” TPR34-‐200x150-‐* 1.41 2.75 2.00 1.94 1.50 1.75 4.00 4.00 2.00 1.69 3.06 1/2”-‐13 1/2”-‐13 6.40 (2.91) 4000 (280)

2 1/2” x 1 1/2” TPR34-‐250x150-‐* 1.41 2.75 2.50 2.38 1.50 2.00 4.00 5.00 2.00 2.00 3.50 1/2”-‐13 1/2”-‐13 8.90 (4.04) 4000 (280)

2 1/2” x 2” TPR34-‐250x200-‐* 1.69 3.06 2.50 2.38 1.94 1.75 4.00 5.00 2.00 2.00 3.50 1/2”-‐13 1/2”-‐13 7.65 (3.47) 4000 (280)

3” x 2” TPR34-‐300x200-‐* 1.69 3.06 3.00 2.88 1.94 2.00 4.00 6.00 2.00 2.44 4.19 5/8”-‐11 1/2”-‐13 10.60 (4.81) 4000 (280)

3” x 2 1/2” TPR34-‐300x250-‐* 2.00 3.50 3.00 2.88 2.38 1.75 4.50 6.00 2.25 2.44 4.19 5/8”-‐11 1/2”-‐13 10.10 (4.58) 3000 (210)


Ordering Example: TPR34-‐200x125-‐SS

* Insert Material

DRAFT

Ordering Example:TPR34-200x125-SS

* Insert Material

TUBE-MAC.comG71


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n* Materials:Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).SS = Stainless Steel, Type 316.



lbs (kg)


3/4” x 1/2” TPRM34-075x050-* 17.5 38.1 42.9 19.1 12.7 25.4 76.2 76.2 38.1 22.4 47.8 M10 x 1.50 M8 x 1.25 3.50 (1.59) 5000 (350)

1” x 1/2” TPRM34-100x050-* 17.5 38.1 38.1 23.9 12.7 38.1 76.2 76.2 38.1 26.2 52.3 M10 x 1.50 M8 x 1.25 3.44 (1.56) 5000 (350)

1” x 3/4” TPRM34-100x075-* 22.4 47.8 38.1 23.9 19.1 38.1 76.2 76.2 38.1 26.2 52.3 M10 x 1.50 M10 x 1.50 3.30 (1.50) 5000 (350)

1-1/4” x 3/4” TPRM34-125x075-* 22.4 47.8 38.1 31.8 19.1 38.1 76.2 76.2 38.1 30.2 58.7 M10 x 1.50 M10 x 1.50 3.20 (1.45) 5000 (350)

1-1/4” x 1” TPRM34-125x100-* 26.2 52.3 38.1 31.8 23.9 31.8 76.2 76.2 38.1 30.2 58.7 M10 x 1.50 M10 x 1.50 2.60 (1.18) 5000 (350)

1-1/2” x 1” TPRM34-150x100-* 26.2 52.3 50.8 38.1 23.9 38.1 76.2 101.6 38.1 35.8 69.9 M12 x 1.75 M10 x 1.50 4.26 (1.93) 5000 (350)

1-1/2” x 1-1/4” TPRM34-150x125-* 30.2 58.7 50.8 38.1 31.8 38.1 76.2 101.6 38.1 35.8 69.9 M12 x 1.75 M10 x 1.50 4.20 (1.91) 4000 (280)

2” x 1-1/4” TPRM34-200x125-* 30.2 58.7 50.8 49.3 31.8 44.5 76.2 101.6 38.1 42.9 77.7 M12 x 1.75 M10 x 1.50 4.70 (2.13) 4000 (280)

2” x 1-1/2” TPRM34-200x150-* 35.8 69.9 50.8 49.3 38.1 44.5 101.6 101.6 50.8 42.9 77.7 M12 x 1.75 M12 x 1.75 6.40 (2.91) 4000 (280)

2-1/2” x 1-1/2” TPRM34-250x150-* 35.8 69.9 63.5 60.5 38.1 50.8 101.6 127.0 50.8 50.8 88.9 M12 x 1.75 M12 x 1.75 8.90 (4.04) 4000 (280)

2-1/2” x 2” TPRM34-250x200-* 42.9 77.7 63.5 60.5 49.3 44.5 101.6 127.0 50.8 50.8 88.9 M12 x 1.75 M12 x 1.75 7.65 (3.47) 4000 (280)

3” x 2” TPRM34-300x200-* 42.9 77.7 76.2 73.2 49.3 50.8 101.6 152.4 50.8 62.0 106.4 M16 x 2.00 M12 x 1.75 10.60 (4.81) 4000 (280)

3” x 2-1/2” TPRM34-300x250-* 50.8 88.9 76.2 73.2 60.5 44.5 114.3 152.4 57.2 62.0 106.4 M16 x 2.00 M12 x 1.75 10.10 (4.48) 3000 (210)

TPRM34 - Transition Plate Reducer Flat Face with Threaded Holes Complete with G1/8 Port (Plugged), Metric

SAE 3000 PSI Transition Plate Reducer - Metric SAE J518 Code 61 (ISO 6162-1) Flange Style

SAE 3000 PSI Transition Plate Reducer -‐ Metric SAE J518 Code 61 (ISO 6162-‐1) Flange Style

TPRM34 Transition Plate Reducer (Metric) -‐ ISO 6162-‐1 Flat Face with Threaded Holes Complete with G1/8 Port (Plugged)

Dimensions (mm) Size (inch) Reducer Part No.

A B C D D1 E G H K M N Thread 1 Thread 2

WT lbs (kg)


3/4” x 1/2” TPRM34-‐075x050-‐* 17.5 38.1 42.9 19.1 12.7 25.4 76.2 76.2 38.1 22.4 47.8 M10 x 1.50 M8 x 1.25 3.50 (1.59) 5000 (350)

1” x 1/2” TPRM34-‐100x050-‐* 17.5 38.1 38.1 23.9 12.7 38.1 76.2 76.2 38.1 26.2 52.3 M10 x 1.50 M8 x 1.25 3.44 (1.56) 5000 (350)

1” x 3/4” TPRM34-‐100x075-‐* 22.4 47.8 38.1 23.9 19.1 38.1 76.2 76.2 38.1 26.2 52.3 M10 x 1.50 M10 x 1.50 3.30 (1.50) 5000 (350)

1 1/4” x 3/4” TPRM34-‐125x075-‐* 22.4 47.8 38.1 31.8 19.1 38.1 76.2 76.2 38.1 30.2 58.7 M10 x 1.50 M10 x 1.50 3.20 (1.45) 5000 (350)

1 1/4” x 1” TPRM34-‐125x100-‐* 26.2 52.3 38.1 31.8 23.9 31.8 76.2 76.2 38.1 30.2 58.7 M10 x 1.50 M10 x 1.50 2.60 (1.18) 5000 (350)

1 1/2” x 1” TPRM34-‐150x100-‐* 26.2 52.3 50.8 38.1 23.9 38.1 76.2 101.6 38.1 35.8 69.9 M12 x 1.75 M10 x 1.50 4.26 (1.93) 5000 (350)

1 1/2” x 1 1/4” TPRM34-‐150x125-‐* 30.2 58.7 50.8 38.1 31.8 38.1 76.2 101.6 38.1 35.8 69.9 M12 x 1.75 M10 x 1.50 4.20 (1.91) 4000 (280)

2” x 1 1/4” TPRM34-‐200x125-‐* 30.2 58.7 50.8 49.3 31.8 44.5 76.2 101.6 38.1 42.9 77.7 M12 x 1.75 M10 x 1.50 4.70 (2.13) 4000 (280)

2” x 1 1/2” TPRM34-‐200x150-‐* 35.8 69.9 50.8 49.3 38.1 44.5 101.6 101.6 50.8 42.9 77.7 M12 x 1.75 M12 x 1.75 6.40 (2.91) 4000 (280)

2 1/2” x 1 1/2” TPRM34-‐250x150-‐* 35.8 69.9 63.5 60.5 38.1 50.8 101.6 127.0 50.8 50.8 88.9 M12 x 1.75 M12 x 1.75 8.90 (4.04) 4000 (280)

2 1/2” x 2” TPRM34-‐250x200-‐* 42.9 77.7 63.5 60.5 49.3 44.5 101.6 127.0 50.8 50.8 88.9 M12 x 1.75 M12 x 1.75 7.65 (3.47) 4000 (280)

3” x 2” TPRM34-‐300x200-‐* 42.9 77.7 76.2 73.2 49.3 50.8 101.6 152.4 50.8 62.0 106.4 M16 x 2.00 M12 x 1.75 10.60 (4.81) 4000 (280)

3” x 2 1/2” TPRM34-‐300x250-‐* 50.8 88.9 76.2 73.2 60.5 44.5 114.3 152.4 57.2 62.0 106.4 M16 x 2.00 M12 x 1.75 10.10 (4.48) 3000 (210)

3 3* Materials:• Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free).• SS = All Stainless Steel, Type 316.

Ordering Example: TPRM34-‐200x125-‐SS

* Insert Material

DRAFT

Ordering Example: TPRM34-200x125-SS

* Insert Material

G72TUBE-MAC.com


SAE 3000 PSI Transition Plate Reducer SAE J518 Code 62/Code 61 (ISO 6162-‐2/6162-‐1) Flange Manifold Mount Style

TPRO6-‐34 Transition Plate Reducer (NPS) -‐ SAE Code 62/Code 61 O-‐Ring Face with Countersunk Holes Complete with Buna O-‐Ring and #4 SAE Port (Plugged)

Dimensions (in) Size (SAE Code 62 x SAE Code 61)

Reducer Part No.


C’T Bore Bolt

Thread UNC-‐2B

O-Ring(Buna) Part

No.

WT lbs (kg)


(bar) 3/4” x 1/2” TPRO6-‐34-‐075x050-‐*-‐^ 0.69 1.50 1.38 0.75 0.50 1.50 3.00 2.75 1.25 0.94 2.00 3/8”-‐16 5/16”-‐18 OR^-‐2-‐214 2.99 (1.36) 5000 (350) 1” x 1/2” TPRO6-‐34-‐100x050-‐*-‐^ 0.69 1.50 1.50 0.94 0.50 1.50 3.00 3.00 1.75 1.09 2.25 7/16”-‐14 5/16”-‐18 OR^-‐2-‐219 3.16 (1.43) 5000 (350) 1” x 3/4” TPRO6-‐34-‐100x075-‐*-‐^ 0.88 1.88 1.50 0.94 0.75 1.50 3.00 3.00 1.75 1.09 2.25 7/16”-‐14 3/8”-‐16 OR^-‐2-‐219 3.04 (1.38) 5000 (350)

1 1/4” x 3/4” TPRO6-‐34-‐125x075-‐*-‐^ 0.88 1.88 1.75 1.25 0.75 1.50 3.00 3.50 1.75 1.25 2.62 1/2”-‐13 3/8”-‐16 OR^-‐2-‐222 3.40 (1.54) 5000 (350) 1 1/4” x 1” TPRO6-‐34-‐125x100-‐*-‐^ 1.03 2.06 1.75 1.25 0.94 1.50 3.00 3.50 1.75 1.25 2.62 1/2”-‐13 3/8”-‐16 OR^-‐2-‐222 4.03 (1.83) 5000 (350) 1 1/2” x 1” TPRO6-‐34-‐150x100-‐*-‐^ 1.03 2.06 2.25 1.50 0.94 1.75 3.50 4.50 2.00 1.44 3.13 5/8”-‐11 3/8”-‐16 OR^-‐2-‐225 6.10 (2.77) 5000 (350)

1 1/2” x 1 1/4” TPRO6-‐34-‐150x125-‐*-‐^ 1.19 2.31 2.25 1.50 1.25 1.75 3.00 4.50 1.50 1.44 3.13 5/8”-‐11 7/16”-‐14 OR^-‐2-‐225 4.70 (2.13) 4000 (280)2” x 1 1/4” TPRO6-‐34-‐200x125-‐*-‐^ 1.19 2.31 2.63 1.94 1.25 1.75 4.00 5.25 2.00 1.75 3.81 3/4”-‐10 7/16”-‐14 OR^-‐2-‐228 7.60 (3.45) 4000 (280)2” x 1 1/2” TPRO6-‐34-‐200x150-‐*-‐^ 1.41 2.75 2.63 1.94 1.50 1.75 4.00 5.25 2.00 1.75 3.81 3/4”-‐10 1/2”-‐13 OR^-‐2-‐228 7.30 (3.31) 4000 (280)

TPROM6-‐34 Transition Plate Reducer (Metric) -‐ ISO6162-‐2 /6162-‐1 O-‐Ring Face with Countersunk Holes Complete with Buna O-‐Ring and G1/8 Port (Plugged)

Dimensions (mm) Size (ISO 6162-2 x ISO 6162-1)

Reducer Part No. A B C D D1 E G H K M N

C’T Bore

Thread ‘O’Ring (Buna) PartNo.

WT lbs (kg)


(bar) 3/4” x 1/2” TPROM6-‐34-‐075x050-‐*-‐^ 17.5 38.1 35.1 19.1 12.7 38.1 76.2 69.9 44.5 23.9 50.8 M10 M8 x 1.25 OR^-2-214 2.99 (1.36) 5000 (350) 1” x 1/2” TPROM6-‐34-‐100x050-‐*-‐^ 17.5 38.1 38.1 23.9 12.7 38.1 76.2 76.2 44.5 27.7 57.2 M12 M8 x 1.25 OR^-2-219 3.16 (1.43) 5000 (350) 1” x 3/4” TPROM6-‐34-‐100x075-‐*-‐^ 22.4 47.8 38.1 23.9 19.1 38.1 76.2 76.2 44.5 27.7 57.2 M12 M10 x 1.50 OR^-2-219 3.04 (1.38) 5000 (350)

1 1/4” x 3/4” TPROM6-‐34-‐125x075-‐*-‐^ 22.4 47.8 44.5 31.8 19.1 38.1 76.2 88.9 44.5 31.8 66.8 M12 M10 x 1.50 OR^-2-222 3.40 (1.54) 5000 (350) 1 1/4” x 1” TPROM6-‐34-‐125x100-‐*-‐^ 26.2 52.3 44.5 31.8 23.9 25.4 76.2 88.9 38.1 31.8 66.8 M12 M10 x 1.50 OR^-2-222 4.03 (1.83) 5000 (350) 1 1/2” x 1” TPROM6-‐34-‐150x100-‐*-‐^ 26.2 52.3 57.2 38.1 23.9 44.5 88.9 114.3 50.8 36.6 79.5 M16 M10 x 1.50 OR^-2-225 6.10 (2.77) 5000 (350)

1 1/2” x 1 1/4” TPROM6-‐34-‐150x125-‐*-‐^ 30.2 58.7 57.2 38.1 31.8 44.5 76.2 114.3 38.1 36.6 79.5 M16 M10 x 1.50 OR^-2-225 4.70 (2.13) 4000 (280)2” x 1 1/4” TPROM6-‐34-‐200x125-‐*-‐^ 30.2 58.7 66.8 49.3 31.8 44.5 101.6 133.4 50.8 44.5 96.8 M20 M10 x 1.50 OR^-2-228 7.60 (3.45) 4000 (280)2” x 1 1/2” TPROM6-‐34-‐200x150-‐*-‐^ 35.8 69.9 66.8 49.3 38.1 44.5 101.6 133.4 50.8 44.5 96.8 M20 M12 x 1.75 OR^-2-228 7.30 (3.31) 4000 (280)



Ordering Example: TPRO6-‐34-‐200x125-‐SS-‐V

* Insert Material


DRAFT SAE 3000 PSI Transition Plate ReducerSAE J518 Code 62/Code 61 (ISO 6162-2/6162-1) Flange Manifold Mount Style



Ordering Example: TPRO6-34-200x125-SS-V

* Insert Material


Size (SAE Code 62 x SAE Code 61)

ReducerPart Number

Dimensions (in)C’T

Bore Bolt

Thread UNC-2B

O-Ring (Buna)

Part Number

WTlbs (kg)


3/4” x 1/2” TPRO6-34-075x050-*-^ 0.69 1.50 1.38 0.75 0.50 1.50 3.00 2.75 1.25 0.94 2.00 3/8”-16 5/16”-18 OR^-2-214 2.99 (1.36) 5000 (350)

1” x 1/2” TPRO6-34-100x050-*-^ 0.69 1.50 1.50 0.94 0.50 1.50 3.00 3.00 1.75 1.09 2.25 7/16”-14 5/16”-18 OR^-2-219 3.16 (1.43) 5000 (350)

1” x 3/4” TPRO6-34-100x075-*-^ 0.88 1.88 1.50 0.94 0.75 1.50 3.00 3.00 1.75 1.09 2.25 7/16”-14 3/8”-16 OR^-2-219 3.04 (1.38) 5000 (350)

1-1/4” x 3/4” TPRO6-34-125x075-*-^ 0.88 1.88 1.75 1.25 0.75 1.50 3.00 3.50 1.75 1.25 2.62 1/2”-13 3/8”-16 OR^-2-222 3.40 (1.54) 5000 (350)

1-1/4” x 1” TPRO6-34-125x100-*-^ 1.03 2.06 1.75 1.25 0.94 1.50 3.00 3.50 1.75 1.25 2.62 1/2”-13 3/8”-16 OR^-2-222 4.03 (1.83) 5000 (350)

1-1/2” x 1” TPRO6-34-150x100-*-^ 1.03 2.06 2.25 1.50 0.94 1.75 3.50 4.50 2.00 1.44 3.13 5/8”-11 3/8”-16 OR^-2-225 6.10 (2.77) 5000 (350)

1-1/2” x 1-1/4” TPRO6-34-150x125-*-^ 1.19 2.31 2.25 1.50 1.25 1.75 3.00 4.50 1.50 1.44 3.13 5/8”-11 7/16”-14 OR^-2-225 4.70 (2.13) 4000 (280)

2” x 1-1/4” TPRO6-34-200x125-*-^ 1.19 2.31 2.63 1.94 1.25 1.75 4.00 5.25 2.00 1.75 3.81 3/4”-10 7/16”-14 OR^-2-228 7.60 (3.45) 4000 (280)

2” x 1-1/2” TPRO6-34-200x150-*-^ 1.41 2.75 2.63 1.94 1.50 1.75 4.00 5.25 2.00 1.75 3.81 3/4”-10 1/2”-13 OR^-2-228 7.30 (3.31) 4000 (280)

Size(ISO 6162-2 x ISO 6162-1)

ReducerPart Number


ThreadO-Ring (Buna)

Part Number

WTlbs (kg)


3/4” x 1/2” TPROM6-34-075x050-*-^ 17.5 38.1 35.1 19.1 12.7 38.1 76.2 69.9 44.5 23.9 50.8 M10 M8 x 1.25 OR^-2-214 2.99 (1.36) 5000 (350)

1” x 1/2” TPROM6-34-100x050-*-^ 17.5 38.1 38.1 23.9 12.7 38.1 76.2 76.2 44.5 27.7 57.2 M12 M8 x 1.25 OR^-2-219 3.16 (1.43) 5000 (350)

1” x 3/4” TPROM6-34-100x075-*-^ 22.4 47.8 38.1 23.9 19.1 38.1 76.2 76.2 44.5 27.7 57.2 M12 M10 x 1.50 OR^-2-219 3.04 (1.38) 5000 (350)

1-1/4” x 3/4” TPROM6-34-125x075-*-^ 22.4 47.8 44.5 31.8 19.1 38.1 76.2 88.9 44.5 31.8 66.8 M12 M10 x 1.50 OR^-2-222 3.40 (1.54) 5000 (350)

1-1/4” x 1” TPROM6-34-125x100-*-^ 26.2 52.3 44.5 31.8 23.9 25.4 76.2 88.9 38.1 31.8 66.8 M12 M10 x 1.50 OR^-2-222 4.03 (1.83) 5000 (350)

1-1/2” x 1” TPROM6-34-150x100-*-^ 26.2 52.3 57.2 38.1 23.9 44.5 88.9 114.3 50.8 36.6 79.5 M16 M10 x 1.50 OR^-2-225 6.10 (2.77) 5000 (350)

1-1/2” x 1-1/4” TPROM6-34-150x125-*-^ 30.2 58.7 57.2 38.1 31.8 44.5 76.2 114.3 38.1 36.6 79.5 M16 M10 x 1.50 OR^-2-225 4.70 (2.13) 4000 (280)

2” x 1-1/4” TPROM6-34-200x125-*-^ 30.2 58.7 66.8 49.3 31.8 44.5 101.6 133.4 50.8 44.5 96.8 M20 M10 x 1.50 OR^-2-228 7.60 (3.45) 4000 (280)

2” x 1-1/2” TPROM6-34-200x150-*-^ 35.8 69.9 66.8 49.3 38.1 44.5 101.6 133.4 50.8 44.5 96.8 M20 M12 x 1.75 OR^-2-228 7.30 (3.31) 4000 (280)

TPRO6-34 - Transition Plate Reducer O-Ring Face with Counterbored Holes Complete with Buna O-Ring and #4 SAE Port (Plugged), NPS

TPROM6-34 - Transition Plate Reducer O-Ring Face with Counterbored Holes Complete with Buna O-Ring and G 1/8 Port (Plugged), Metric

TUBE-MAC.comG73


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Transition Plate ReducerISO 6164/SAE Code 61 (ISO6164/6162-1) Flange Manifold Mount Style



Ordering Example: TPRO7-34-250x150-SS-V

* Insert Material


Size(ISO 6164 x

SAE Code 61)

ReducerPart Number


Thread UNC-2B

O-Ring (Buna)

Part Number

WTlbs (kg)


2-1/2” x 1-1/2” TPRO7-34-250x150-*-^ 4.65 1.41 2.75 2.50 2.38 1.50 1.75 5.00 3/4”-10 1/2”-13 OR^-2-232 9.20 (4.17) 3000 (210)

2-1/2” x 2” TPRO7-34-250x200-*-^ 4.65 1.69 3.06 2.75 2.38 1.94 1.75 5.00 3/4”-10 1/2”-13 OR^-2-232 9.90 (4.49) 3000 (210)

3” x 2” TPRO7-34-300x200-*-^ 5.71 1.69 3.06 3.00 2.88 1.94 2.00 6.00 1”-8 1/2”-13 OR^-2-237 14.20 (6.44) 3000 (210)

3” x 2-1/2” TPRO7-34-300x250-*-^ 5.71 2.00 3.50 3.00 2.88 2.38 2.00 6.00 1”-8 1/2”-13 OR^-2-237 15.40 (6.99) 2500 (175)

4” x 2-1/2” TPRO7-34-400x250-*-^ 6.89 2.00 3.50 3.50 3.50 2.38 2.00 7.00 1-1/8”-7 1/2”-13 OR^-2-241 22.20 (10.07) 2500 (175)

4” x 3” TPRO7-34-400x300-*-^ 6.89 2.44 4.19 3.75 3.50 2.88 2.00 7.00 1-1/8”-7 5/8”-11 OR^-2-241 21.70 (9.84) 2000 (140)

Size(ISO 6164 x

6162-1)

ReducerPart Number


ThreadO-Ring (Buna)

Part Number

WTlbs (kg)


2-1/2” x 1-1/2” TPROM7-34-250x150-*-^ 118.1 35.8 69.9 63.5 60.5 38.1 44.5 127.0 M20 M12 x 1.75 OR^-2-232 9.20 (4.17) 3000 (210)

2-1/2” x 2” TPROM7-34-250x200-*-^ 118.1 42.9 77.7 69.9 60.5 49.3 44.5 127.0 M20 M12 x 1.75 OR^-2-232 9.90 (4.49) 3000 (210)

3” x 2” TPROM7-34-300x200-*-^ 145.0 42.9 77.7 76.2 73.2 49.3 50.8 152.4 M24 M12 x 1.75 OR^-2-237 14.20 (6.44) 3000 (210)

3” x 2-1/2” TPROM7-34-300x250-*-^ 145.0 50.8 88.9 76.2 73.2 60.5 50.8 152.4 M24 M12 x 1.75 OR^-2-237 15.40 (6.99) 2500 (175)

4” x 2-1/2” TPROM7-34-400x250-*-^ 175.0 50.8 88.9 88.9 88.9 60.5 50.8 177.8 M30 M12 x 1.75 OR^-2-241 22.20 (10.07) 2500 (175)

4” x 3” TPROM7-34-400x300-*-^ 175.0 62.0 106.4 95.3 88.9 73.2 50.8 177.8 M30 M16 x 2.00 OR^-2-241 21.70 (9.84) 2000 (140)

TPRO7-34 - Transition Plate Reducer O-Ring Face with Counterbored Holes Complete with Buna O-Ring and #4 SAE Port (Plugged), NPS

TPROM7-34 - Transition Plate Reducer O-Ring Face with Counterbored Holes Complete with Buna O-Ring and G1/8 Port (Plugged), Metric

SAE 6000 PSI Transition Plate Reducer

ISO 6164/SAE Code 62 (ISO6164/6162-2) Flange Manifold Mount Style

TPRO7-64 Transition Plate Reducer - ISO 6164/SAE Code 62 O-Ring Face with Counte HolesComplete with Buna O-Ring and #4 SAE Port (Plugged)

Size (ISO 6164 x

SAE Code 62)

Reducer Part No.

Dimensions (in)C’T BoreBolt

ThreadUNC-2B

O-Ring(Buna)

Part No.

WT lbs (kg)


(bar)T A B C D D1 E H

2 1/2” x 1 1/2” TPRO7- 4-250x150-*-^ 4.65 1.4 2.50 2.38 1.50 2 5.00 3/4”-10 OR^-2-232 2

2 2 1. 3. 2. 8 1.94 2 2 .00 OR^-2-23

2 2 1. 3. 3. 0 1.94 2.2 .00 1 OR^-2-2 2

TPROM7-64 Transition Plate Reducer - ISO6164/6162-2 O-Ring Face with Counter HolesComplete with Buna O-Ring and G1/8 Port (Plugged)

Size (ISO 6164 x

6162-2)

Reducer Part No.

Dimensions (mm) C’TBore Thread

O-Ring(Buna)PartNo.

WT lbs (kg)

Working Pressure

(bar)T A B C D D1 E H

2 1/2” x 1 1/2” TPROM7- 4-250x150-*-^ 118.1 36.6 79.5 63.5 60.5 38.1 50.8 127.0 M20 M16 x 2.00 OR^-2-232 2 3” x 2” TPROM7- 4- 0x200-*-^ 145.0 44.5 96.8 76.2 73.2 49.3 57.2 152.4 M24 M20 x 2.50 OR^-2-23 )

4” x 2” TPROM7- 4- 00x200-*-^ 175.0 44.5 96.8 88.9 88.9 49.3 57.2 177.8 M30 M20 x 2.50 OR^-2-2 2



Ordering Example: TPRO7- 4-250x150-SS-V

* Insert Material


G74TUBE-MAC.com


SAE 3000 PSI Transition Plate Reducer -‐ NPS SAE J518 Code 61 (ISO 6162-‐1) Flange Manifold Mount Style

TPRO34 Transition Plate Reducer (NPS) -‐ SAE Code 61 O-‐Ring Face with Countersunk Holes Complete with Buna O-‐Ring and #4 SAE Port (Plugged)


Reducer Part No.


C’T Bore Bolt

Thread UNC-2B

O-Ring(Buna)

Part No.

WT lbs (kg)


3/4” x 1/2” TPRO34-‐075x050-‐*-‐^ 0.69 1.50 1.50 0.75 0.50 1.50 3.00 3.00 1.69 0.88 1.88 3/8”-‐16 5/16”-‐18 OR^-‐2-‐214 3.30 (1.50) 5000 (350) 1” x 1/2” TPRO34-‐100x050-‐*-‐^ 0.69 1.50 1.50 0.94 0.50 1.50 3.00 3.00 1.69 1.03 2.06 3/8”-‐16 5/16”-‐18 OR^-‐2-‐219 3.20 (1.45) 5000 (350) 1” x 3/4” TPRO34-‐100x075-‐*-‐^ 0.88 1.88 1.50 0.94 0.75 1.50 3.00 3.00 1.69 1.03 2.06 3/8”-‐16 3/8”-‐16 OR^-‐2-‐219 3.20 (1.45) 5000 (350)

1 1/4” x 3/4” TPRO34-‐125x075-‐*-‐^ 0.88 1.88 1.63 1.25 0.75 1.50 3.00 3.25 1.69 1.19 2.31 7/16”-‐14 3/8”-‐16 OR^-‐2-‐222 3.30 (1.50) 5000 (350) 1 1/4” x 1” TPRO34-‐125x100-‐*-‐^ 1.03 2.06 1.63 1.25 0.94 1.25 3.00 3.25 1.50 1.19 2.31 7/16”-‐14 3/8”-‐16 OR^-‐2-‐222 2.58 (1.17) 5000 (350) 1 1/2” x 1” TPRO34-‐150x100-‐*-‐^ 1.03 2.06 2.00 1.50 0.94 1.50 3.00 4.00 1.50 1.41 2.75 1/2”-‐13 3/8”-‐16 OR^-‐2-‐225 4.00 (1.81) 5000 (350)

1 1/2” x 1 1/4” TPRO34-‐150x125-‐*-‐^ 1.19 2.31 2.00 1.50 1.25 1.50 3.00 4.00 1.50 1.41 2.75 1/2”-‐13 7/16”-‐14 OR^-‐2-‐225 3.70 (1.68) 4000 (280)2” x 1 1/4” TPRO34-‐200x125-‐*-‐^ 1.19 2.31 2.00 1.94 1.25 1.75 3.00 4.00 1.50 1.69 3.06 1/2”-‐13 7/16”-‐14 OR^-‐2-‐228 4.20 (1.91) 4000 (280)2” x 1 1/2” TPRO34-‐200x150-‐*-‐^ 1.41 2.75 2.00 1.94 1.50 1.75 4.00 4.00 2.00 1.69 3.06 1/2”-‐13 1/2”-‐13 OR^-‐2-‐228 5.90 (2.68) 4000 (280)

2 1/2” x 1 1/2” TPRO34-‐250x150-‐*-‐^ 1.41 2.75 2.50 2.38 1.50 2.00 4.00 5.00 2.00 2.00 3.50 1/2”-‐13 1/2”-‐13 OR^-‐2-‐232 8.80 (3.99) 4000 (280)2 1/2” x 2” TPRO34-‐250x200-‐*-‐^ 1.69 3.06 2.50 2.38 1.94 1.75 4.00 5.00 2.00 2.00 3.50 1/2”-‐13 1/2”-‐13 OR^-‐2-‐232 7.30 (3.31) 4000 (280)3” x 2” TPRO34-‐300x200-‐*-‐^ 1.69 3.06 3.00 2.88 1.94 2.00 4.00 6.00 2.00 2.44 4.19 5/8”-‐11 1/2”-‐13 OR^-‐2-‐237 9.80 (4.45) 4000 (280)

3” x 2 1/2” TPRO34-‐300x250-‐*-‐^ 2.00 3.50 3.00 2.88 2.38 1.75 4.50 6.00 2.25 2.44 4.19 5/8”-‐11 1/2”-‐13 OR^-‐2-‐237 9.50 (4.31) 3000 (210)



Ordering Example: TPRO34-‐200x150-‐SS-‐V

* Insert Material


DRAFT SAE 3000 PSI Transition Plate Reducer - NPS SAE J518 Code 61 (ISO 6162-1) Flange Manifold Mount Style



Ordering Example: TPRO34-200x150-SS-V

* Insert Material




Thread UNC-2B

O-Ring (Buna)

Part Number

WTlbs (kg)


3/4” x 1/2” TPRO34-075x050-*-^ 0.69 1.50 1.50 0.75 0.50 1.50 3.00 3.00 1.69 0.88 1.88 3/8”-16 5/16”-18 OR^-2-214 3.30 (1.50) 5000 (350)

1” x 1/2” TPRO34-100x050-*-^ 0.69 1.50 1.50 0.94 0.50 1.50 3.00 3.00 1.69 1.03 2.06 3/8”-16 5/16”-18 OR^-2-219 3.20 (1.45) 5000 (350)

1” x 3/4” TPRO34-100x075-*-^ 0.88 1.88 1.50 0.94 0.75 1.50 3.00 3.00 1.69 1.03 2.06 3/8”-16 3/8”-16 OR^-2-219 3.20 (1.45) 5000 (350)

1-1/4” x 3/4” TPRO34-125x075-*-^ 0.88 1.88 1.63 1.25 0.75 1.50 3.00 3.25 1.69 1.19 2.31 7/16”-14 3/8”-16 OR^-2-222 3.30 (1.50) 5000 (350)

1-1/4” x 1” TPRO34-125x100-*-^ 1.03 2.06 1.63 1.25 0.94 1.25 3.00 3.25 1.50 1.19 2.31 7/16”-14 3/8”-16 OR^-2-222 2.58 (1.17) 5000 (350)

1-1/2” x 1” TPRO34-150x100-*-^ 1.03 2.06 2.00 1.50 0.94 1.50 3.00 4.00 1.50 1.41 2.75 1/2”-13 3/8”-16 OR^-2-225 4.00 (1.81) 5000 (350)

1-1/2” x 1-1/4” TPRO34-150x125-*-^ 1.19 2.31 2.00 1.50 1.25 1.50 3.00 4.00 1.50 1.41 2.75 1/2”-13 7/16”-14 OR^-2-225 3.70 (1.68) 4000 (280)

2” x 1-1/4” TPRO34-200x125-*-^ 1.19 2.31 2.00 1.94 1.25 1.75 3.00 4.00 1.50 1.69 3.06 1/2”-13 7/16”-14 OR^-2-228 4.20 (1.91) 4000 (280)

2” x 1-1/2” TPRO34-200x150-*-^ 1.41 2.75 2.00 1.94 1.50 1.75 4.00 4.00 2.00 1.69 3.06 1/2”-13 1/2”-13 OR^-2-228 5.90 (2.68) 4000 (280)

2-1/2” x 1-1/2” TPRO34-250x150-*-^ 1.41 2.75 2.50 2.38 1.50 2.00 4.00 5.00 2.00 2.00 3.50 1/2”-13 1/2”-13 OR^-2-232 8.80 (3.99) 4000 (280)

2-1/2” x 2” TPRO34-250x200-*-^ 1.69 3.06 2.50 2.38 1.94 1.75 4.00 5.00 2.00 2.00 3.50 1/2”-13 1/2”-13 OR^-2-232 7.30 (3.31) 4000 (280)

3” x 2” TPRO34-300x200-*-^ 1.69 3.06 3.00 2.88 1.94 2.00 4.00 6.00 2.00 2.44 4.19 5/8”-11 1/2”-13 OR^-2-237 9.80 (4.45) 4000 (280)

3” x 2-1/2” TPRO34-300x250-*-^ 2.00 3.50 3.00 2.88 2.38 1.75 4.50 6.00 2.25 2.44 4.19 5/8”-11 1/2”-13 OR^-2-237 9.50 (4.31) 3000 (210)

TPRO34 - Transition Plate Reducer O-Ring Face with Counterbored Holes Complete with Buna O-Ring and #4 SAE Port (Plugged), NPS

TUBE-MAC.comG75


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

SAE 3000 PSI Transition Plate Reducer -‐ Metric SAE J518 Code 61 (ISO 6162-‐1) Flange Manifold Mount Style

TPROM34 Transition Plate Reducer (Metric) -‐ ISO 6162-‐1 O-‐Ring Face with Countersunk Holes Complete with Buna O-‐Ring and G1/8 (Plugged)

Dimensions (millimeters) Size (inch) Reducer Part No.

A B C D D1 E G H K M N C’T Bore Thread

O-Ring(Buna)

Part No.

WT lbs (kg)


3/4” x 1/2” TPROM34-‐075x050-‐*-‐^ 17.5 38.1 38.1 19.1 12.7 38.1 76.2 76.2 42.9 22.4 47.8 M10 M8 x 1.25 OR^-‐2-‐214 3.20 (1.45) 5000 (350) 1” x 1/2” TPROM34-‐100x050-‐*-‐^ 17.5 38.1 38.1 23.9 12.7 38.1 76.2 76.2 38.1 26.2 52.3 M10 M8 x 1.25 OR^-‐2-‐219 3.20 (1.45) 5000 (350) 1” x 3/4” TPROM34-‐100x075-‐*-‐^ 22.4 47.8 38.1 23.9 19.1 38.1 76.2 76.2 38.1 26.2 52.3 M10 M10 x 1.50 OR^-‐2-‐219 3.30 (1.50) 5000 (350)

1 1/4” x 3/4” TPROM34-‐125x075-‐*-‐^ 22.4 47.8 41.4 31.8 19.1 38.1 76.2 82.6 38.1 30.2 58.7 M10 M10 x 1.50 OR^-‐2-‐222 2.58 (1.17) 5000 (350) 1 1/4” x 1” TPROM34-‐125x100-‐*-‐^ 26.2 52.3 41.4 31.8 23.9 31.8 76.2 82.6 38.1 30.2 58.7 M10 M10 x 1.50 OR^-‐2-‐222 4.00 (1.81) 5000 (350) 1 1/2” x 1” TPROM34-‐150x100-‐*-‐^ 26.2 52.3 50.8 38.1 23.9 38.1 76.2 101.6 38.1 35.8 69.9 M12 M10 x 1.50 OR^-‐2-‐225 3.70 (1.68) 5000 (350)

1 1/2” x 1 1/4” TPROM34-‐150x125-‐*-‐^ 30.2 58.7 50.8 38.1 31.8 38.1 76.2 101.6 38.1 35.8 69.9 M12 M10 x 1.50 OR^-‐2-‐225 4.20 (1.91) 4000 (280)2” x 1 1/4” TPROM34-‐200x125-‐*-‐^ 30.2 58.7 50.8 49.3 31.8 44.5 76.2 101.6 38.1 42.9 77.7 M12 M10 x 1.50 OR^-‐2-‐228 5.90 (2.68) 4000 (280)2” x 1 1/2” TPROM34-‐200x150-‐*-‐^ 35.8 69.9 50.8 49.3 38.1 44.5 101.6 101.6 50.8 42.9 77.7 M12 M12 x 1.75 OR^-‐2-‐228 8.80 (3.99) 4000 (280)

2 1/2” x 1 1/2” TPROM34-‐250x150-‐*-‐^ 35.8 69.9 63.5 60.5 38.1 50.8 101.6 127.0 50.8 50.8 88.9 M12 M12 x 1.75 OR^-‐2-‐232 7.30 (3.31) 4000 (280)2 1/2” x 2” TPROM34-‐250x200-‐*-‐^ 42.9 77.7 63.5 60.5 49.3 44.5 101.6 127.0 50.8 50.8 88.9 M12 M12 x 1.75 OR^-‐2-‐232 9.80 (4.45) 4000 (280)

3” x 2” TPROM34-‐300x200-‐*-‐^ 42.9 77.7 76.2 73.2 49.3 50.8 101.6 152.4 50.8 62.0 106.4 M16 M12 x 1.75 OR^-‐2-‐237 9.50 (4.31) 4000 (280)3” x 2 1/2” TPROM34-‐300x250-‐*-‐^ 50.8 88.9 76.2 73.2 60.5 44.5 114.3 152.4 57.2 62.0 106.4 M16 M12 x 1.75 OR^-‐2-‐237 3.30 (1.50) 3000 (210)



Ordering Example: TPROM34-‐200x150-‐SS-‐V

* Insert Material


DRAFT SAE 3000 PSI Transition Plate Reducer - Metric SAE J518 Code 61 (ISO 6162-1) Flange Manifold Mount Style



Ordering Example: TPROM34-200x150-SS-V

* Insert Material




ThreadO-Ring (Buna)

Part Number

WTlbs (kg)


3/4” x 1/2” TPROM34-075x050-*-^ 17.5 38.1 38.1 19.1 12.7 38.1 76.2 76.2 42.9 22.4 47.8 M10 M8 x 1.25 OR^-2-214 3.20 (1.45) 5000 (350)

1” x 1/2” TPROM34-100x050-*-^ 17.5 38.1 38.1 23.9 12.7 38.1 76.2 76.2 38.1 26.2 52.3 M10 M8 x 1.25 OR^-2-219 3.20 (1.45) 5000 (350)

1” x 3/4” TPROM34-100x075-*-^ 22.4 47.8 38.1 23.9 19.1 38.1 76.2 76.2 38.1 26.2 52.3 M10 M10 x 1.50 OR^-2-219 3.30 (1.50) 5000 (350)

1-1/4” x 3/4” TPROM34-125x075-*-^ 22.4 47.8 41.4 31.8 19.1 38.1 76.2 82.6 38.1 30.2 58.7 M10 M10 x 1.50 OR^-2-222 2.58 (1.17) 5000 (350)

1-1/4” x 1” TPROM34-125x100-*-^ 26.2 52.3 41.4 31.8 23.9 31.8 76.2 82.6 38.1 30.2 58.7 M10 M10 x 1.50 OR^-2-222 4.00 (1.81) 5000 (350)

1-1/2” x 1” TPROM34-150x100-*-^ 26.2 52.3 50.8 38.1 23.9 38.1 76.2 101.6 38.1 35.8 69.9 M12 M10 x 1.50 OR^-2-225 3.70 (1.68) 5000 (350)

1-1/2” x 1-1/4” TPROM34-150x125-*-^ 30.2 58.7 50.8 38.1 31.8 38.1 76.2 101.6 38.1 35.8 69.9 M12 M10 x 1.50 OR^-2-225 4.20 (1.91) 4000 (280)

2” x 1-1/4” TPROM34-200x125-*-^ 30.2 58.7 50.8 49.3 31.8 44.5 76.2 101.6 38.1 42.9 77.7 M12 M10 x 1.50 OR^-2-228 5.90 (2.68) 4000 (280)

2” x 1-1/2” TPROM34-200x150-*-^ 35.8 69.9 50.8 49.3 38.1 44.5 101.6 101.6 50.8 42.9 77.7 M12 M12 x 1.75 OR^-2-228 8.80 (3.99) 4000 (280)

2-1/2” x 1-1/2” TPROM34-250x150-*-^ 35.8 69.9 63.5 60.5 38.1 50.8 101.6 127.0 50.8 50.8 88.9 M12 M12 x 1.75 OR^-2-232 7.30 (3.31) 4000 (280)

2-1/2” x 2” TPROM34-250x200-*-^ 42.9 77.7 63.5 60.5 49.3 44.5 101.6 127.0 50.8 50.8 88.9 M12 M12 x 1.75 OR^-2-232 9.80 (4.45) 4000 (280)

3” x 2” TPROM34-300x200-*-^ 42.9 77.7 76.2 73.2 49.3 50.8 101.6 152.4 50.8 62.0 106.4 M16 M12 x 1.75 OR^-2-237 9.50 (4.31) 4000 (280)

3” x 2-1/2” TPROM34-300x250-*-^ 50.8 88.9 76.2 73.2 60.5 44.5 114.3 152.4 57.2 62.0 106.4 M16 M12 x 1.75 OR^-2-237 3.30 (1.50) 3000 (210)

TPROM34 - Transition Plate Reducer O-Ring Face with Counterbored Holes Complete with Buna O-Ring and G1/8 (Plugged), Metric

G76TUBE-MAC.com



Size Adapter PlatePart Number

Dimensions (in) Thread UNC-2B

WTlbs (kg)

Working PressurePSI (bar)A B C D E G H K

1/2” AP34-050-* 0.69 1.50 1.25 0.50 1.00 2.75 2.50 1.63 5/16”-18 1.70 (0.77) 5000 (350)

3/4” AP34-075-* 0.88 1.88 1.50 0.75 1.00 3.00 3.00 1.69 3/8”-16 2.20 (1.00) 5000 (350)

1” AP34-100-* 1.03 2.06 1.50 0.94 1.00 3.00 3.00 1.50 3/8”-16 2.10 (0.95) 5000 (350)

1-1/4” AP34-125-* 1.19 2.31 1.50 1.25 1.25 3.00 3.00 1.50 7/16”-14 2.40 (1.09) 4000 (280)

1-1/2” AP34-150-* 1.41 2.75 2.00 1.50 1.50 4.00 4.00 2.00 1/2”-13 5.40 (2.45) 4000 (280)

2” AP34-200-* 1.69 3.06 2.00 1.94 1.50 4.00 4.00 2.00 1/2”-13 4.90 (2.22) 4000 (280)

AP34 - Adapter Plate Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged), NPS

SAE 3000 PSI Adapter Plate SAE J518 Code 61 (ISO 6162-1) Flange Style

SAE 3000 PSI Adapter Plate SAE J518 Code 61 (ISO 6162-‐1) Flange Style

AP34 Adapter Plate (NPS) -‐ SAE Code 61 Flat Face with Threaded Holes Complete with #4 SAE Port (Plugged)


Adapter Plate

Part No. A B C D E G H K

Thread UNC-2B

WT lbs (kg)


(bar) 1/2” AP34-‐050-‐* 0.69 1.50 1.25 0.50 1.00 2.75 2.50 1.63 5/16”-‐18 1.70 (0.77) 5000 (350) 3/4” AP34-‐075-‐* 0.88 1.88 1.50 0.75 1.00 3.00 3.00 1.69 3/8”-‐16 2.20 (1.00) 5000 (350) 1” AP34-‐100-‐* 1.03 2.06 1.50 0.94 1.00 3.00 3.00 1.50 3/8”-‐16 2.10 (0.95) 5000 (350)

1 1/4” AP34-‐125-‐* 1.19 2.31 1.50 1.25 1.25 3.00 3.00 1.50 7/16”-‐14 2.40 (1.09) 4000 (280) 1 1/2” AP34-‐150-‐* 1.41 2.75 2.00 1.50 1.50 4.00 4.00 2.00 1/2”-‐13 5.40 (2.45) 4000 (280) 2” AP34-‐200-‐* 1.69 3.06 2.00 1.94 1.50 4.00 4.00 2.00 1/2”-‐13 4.90 (2.22) 4000 (280)

APM34 Adapter Plate (Metric) – ISO 6162-‐1 Flat Face with Threaded Holes Complete with G 1/8 Port (Plugged)


Adapter Plate

Part No. A B C D E G H K

Thread WT

lbs (kg) Working

Pressure PSI (bar)

1/2” APM34-‐050-‐* 17.5 38.1 31.8 12.7 25.4 69.9 63.5 41.4 M8 x 1.25 1.70 (0.77) 5000 (350) 3/4” APM34-‐075-‐* 22.4 47.8 38.1 19.1 25.4 76.2 76.2 42.9 M10 x 1.50 2.20 (1.00) 5000 (350) 1” APM34-‐100-‐* 26.2 52.3 38.1 23.9 25.4 76.2 76.2 38.1 M10 x 1.50 2.10 (0.95) 5000 (350)

1 1/4” APM34-‐125-‐* 30.2 58.7 38.1 31.8 31.8 76.2 76.2 38.1 M10 x 1.50 2.40 (1.09) 4000 (280) 1 1/2” APM34-‐150-‐* 35.8 69.9 50.8 38.1 38.1 101.6 101.6 50.8 M12 x 1.75 5.40 (2.45) 4000 (280) 2” APM34-‐200-‐* 42.9 77.7 50.8 49.3 38.1 101.6 101.6 50.8 M12 x 1.75 4.90 (2.22) 4000 (280)


Ordering Example: AP34-‐200-‐SS

* Insert Material

DRAFT

Ordering Example: AP34-200-SS

* Insert Material

Size Adapter PlatePart Number


lbs (kg)

Working PressurePSI (bar)A B C D E G H K

1/2” APM34-050-* 17.5 38.1 31.8 12.7 25.4 69.9 63.5 41.4 M8 x 1.25 1.70 (0.77) 5000 (350)

3/4” APM34-075-* 22.4 47.8 38.1 19.1 25.4 76.2 76.2 42.9 M10 x 1.50 2.20 (1.00) 5000 (350)

1” APM34-100-* 26.2 52.3 38.1 23.9 25.4 76.2 76.2 38.1 M10 x 1.50 2.10 (0.95) 5000 (350)

1-1/4” APM34-125-* 30.2 58.7 38.1 31.8 31.8 76.2 76.2 38.1 M10 x 1.50 2.40 (1.09) 4000 (280)

1-1/2” APM34-150-* 35.8 69.9 50.8 38.1 38.1 101.6 101.6 50.8 M12 x 1.75 5.40 (2.45) 4000 (280)

2” APM34-200-* 42.9 77.7 50.8 49.3 38.1 101.6 101.6 50.8 M12 x 1.75 4.90 (2.22) 4000 (280)

APM34 - Adapter Plate Flat Face with Threaded Holes Complete with G 1/8 Port (Plugged), Metric

TUBE-MAC.comG77


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI O-Ring Connector PlateSAE J518 Code 61 (ISO 6162-1)


Ordering Example: OCP-200-SS

* Insert Material

SizeConnector

PlatePart Number

Dimensionsin (mm) WT

lbs (kg)D L

1/2" OCP-050-* 0.50 (12.7) 0.13 (3.3) 0.04 (0.02)

3/4" OCP-075-* 0.75 (19.1) 0.13 (3.3) 0.07 (0.03)

1” OCP-100-* 0.94 (23.9) 0.13 (3.3) 0.08 (0.04)

1-1/4" OCP-125-* 1.20 (30.5) 0.13 (3.3) 0.09 (0.04)

1-1/2" OCP-150-* 1.50 (38.1) 0.13 (3.3) 0.17 (0.08)

2” OCP-200-* 1.94 (49.3) 0.13 (3.3) 0.15 (0.07)

2-1/2" OCP-250-* 2.36 (59.9) 0.13 (3.3) 0.17 (0.08)

3” OCP-300-* 2.88 (73.2) 0.13 (3.3) 0.25 (0.11)

OCP - O-Ring Connector Plate

SAE 3000 PSI O-‐Ring Connector Plate

OCP O-‐Ring Connector Plate

* Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = All Stainless Steel, Type 316.

5

Dimensions in (mm) Size

Connector Plate

Part No. D L

WT lbs (kg)

1/2" OCP-‐050-‐* 0.50 (12.7) 0.13 (3.3) 0.04 (0.02) 3/4" OCP-‐075-‐* 0.75 (19.1) 0.13 (3.3) 0.07 (0.03) 1” OCP-‐100-‐* 0.94 (23.9) 0.13 (3.3) 0.08 (0.04)

1 1/4" OCP-‐125-‐* 1.20 (30.5) 0.13 (3.3) 0.09 (0.04) 1 1/2" OCP-‐150-‐* 1.50 (38.1) 0.13 (3.3) 0.17 (0.08)

2” OCP-‐200-‐* 1.94 (49.3) 0.13 (3.3) 0.15 (0.07) 2 1/2" OCP-‐250-‐* 2.36 (59.9) 0.13 (3.3) 0.17 (0.08)

3” OCP-‐300-‐* 2.88 (73.2) 0.13 (3.3) 0.25 (0.11)

Ordering Example: OCP-‐200-‐SS

* Insert Material

DRAFT

G78TUBE-MAC.com


SAE 3000 PSI Connector PlateSAE J518 Code 61 (ISO 6162-1)

Size Part Number


lbs (kg)A B D E

1/2" CP34-050 0.69 (17.53) 1.50 (38.10) 0.50 (12.70) 0.12 (3.05) 0.09 (0.04)

3/4" CP34-075 0.88 (22.35) 1.88 (47.75) 0.75 (19.05) 0.12 (3.05) 0.12 (0.05)

1" CP34-100 1.03 (26.16) 2.06 (52.32) 0.94 (23.88) 0.12 (3.05) 0.14 (0.06)

1-1/4" CP34-125 1.19 (30.23) 2.31 (58.67) 1.25 (31.75) 0.12 (3.05) 0.20 (0.09)

1-1/2" CP34-150 1.41 (35.81) 2.75 (69.85) 1.50 (38.10) 0.12 (3.05) 0.28 (0.13)

2" CP34-200 1.69 (42.93) 3.06 (77.72) 1.94 (49.28) 0.12 (3.05) 0.33 (0.15)

CP - Connector Plate

SAE 3000 PSI Connector Plate SAE J518 Code 61 (ISO 6162-‐1)

CP Connector Plate

Dimensions in (mm) Size Part No.

A B D E

WT lbs (kg)

1/2" CP34-‐050 0.69 (17.53) 1.50 (38.10) 0.50 (12.70) 0.12 (3.05) 0.09 (0.04) 3/4" CP34-‐075 0.88 (22.35) 1.88 (47.75) 0.75 (19.05) 0.12 (3.05) 0.12 (0.05)

1" CP34-‐100 1.03 (26.16) 2.06 (52.32) 0.94 (23.88) 0.12 (3.05) 0.14 (0.06)

1 1/4" CP34-‐125 1.19 (30.23) 2.31 (58.67) 1.25 (31.75) 0.12 (3.05) 0.20 (0.09) 1 1/2" CP34-‐150 1.41 (35.81) 2.75 (69.85) 1.50 (38.10) 0.12 (3.05) 0.28 (0.13)

2" CP34-‐200 1.69 (42.93) 3.06 (77.72) 1.94 (49.28) 0.12 (3.05) 0.33 (0.15)

DRAFT

TUBE-MAC.comG79


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Retain RingSAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Retain RingSAE J518 Code 61 (ISO 6162-‐1)

R Retain Ring – 1/2"-‐ 3" Dimensions in (mm) Size

Retain Ring Part No.

D t

WT lbs (kg)

1/2" R-‐050 0.85 (21.6) 0.16 (4.1) 0.01 (0.005) 3/4" R-‐075 1.24 (31.5) 0.16 (4.1) 0.02 (0.009) 1” R-‐100 1.32 (33.5) 0.20 (5.1) 0.03 (0.014)

1 1/4" R-‐125 1.59 (40.4) 0.20 (5.1) 0.04 (0.018) 1 1/2” R-‐150 1.99 (50.5) 0.20 (5.1) 0.05 (0.023) 2” R-‐200 2.38 (60.5) 0.20 (5.1) 0.06 (0.027)

2 1/2” R-‐250 2.93 (74.4) 0.20 (5.1) 0.07 (0.032) 3” R-‐300 3.56 (90.4) 0.24 (6.1) 0.12 (0.054)

Materials: • Stainless Steel – AISI 302/304 Spring Temper

DRAFT

* Materials:Stainless Steel – AISI 302/304 Spring Temper

Size Retain RingPart Number


lbs (kg)D t

1/2" R-050 0.85 (21.6) 0.16 (4.0) 0.01 (0.005)

3/4" R-075 1.24 (31.5) 0.16 (4.0) 0.02 (0.009)

1” R-100 1.32 (33.5) 0.20 (5.0) 0.03 (0.014)

1-1/4" R-125 1.59 (40.4) 0.20 (5.0) 0.04 (0.018)

1-1/2” R-150 1.99 (50.5) 0.20 (5.0) 0.05 (0.023)

2” R-200 2.38 (60.5) 0.20 (5.0) 0.06 (0.027)

2-1/2” R-250 2.93 (74.4) 0.20 (5.0) 0.07 (0.032)

3” R-300 3.56 (90.4) 0.24 (6.0) 0.12 (0.054)

R – Retain Ring

Size Retain RingPart Number


lbs (kg)D t

1-1/2” RA-150 1.69 (42.93) 0.20 (5.0) 0.04 (0.018)

2” RA-200 2.16 (54.86) 0.20 (5.0) 0.05 (0.023)

2-1/2” RA-250 2.66 (67.50) 0.20 (5.0) 0.07 (0.032)

3” RA-300 3.24 (82.4) 0.24 (6.0) 0.11 (0.050)

RA - Retain Ring for Grooved NPS Pipe

G80TUBE-MAC.com


SAE 3000 PSI O-Ring Spacerfor Retain Ring Pipe Flange ConnectionSAE J518 Code 61 (ISO 6162-1)

Size Part Number

Dimensionsin (mm)

O-Rings 1&2

(Buna)Part Number

WTlbs (kg)

D L

1/2" OS-050-*-^ 0.55 (14.0) 0.50 (12.7) OR^-3-909 0.11 (0.05)

3/4" OS-075-*-^ 0.79 (20.1) 0.50 (12.7) OR^-3-913 0.18 (0.08)

1” OS-100-*-^ 0.91 (23.1) 0.50 (12.7) OR^-3-916 0.21 (0.10)

1-1/4" OS-125-*-^ 1.18 (30.0) 0.50 (12.7) OR^-3-918 0.26 (0.12)

1-1/2” OS-150-*-^ 1.54 (39.1) 0.50 (12.7) OR^-3-924 0.33 (0.15)

2” OS-200-*-^ 1.91 (48.5) 0.50 (12.7) OR^-3-928 0.43 (0.20)

2-1/2” OS-250-*-^ 2.36 (59.9) 1.00 (25.4) OR^-2-232 1.17 (0.53)

3” OS-300-*-^ 2.88 (73.2) 1.00 (25.4) OR^-2-237 1.68 (0.77)

SAE 3000 PSI O-‐Ring Spacer SAE J518 Code 61 (ISO 6162-‐1)

OS O-‐Ring Spacer for Retain Ring Pipe – 1/2"-‐ 3" Complete with Buna O-‐Rings

Dimensions in (mm)

Size

Part No.

D L

O-‐Rings 1&2 (Buna) Part No.

WT lbs (kg)

1/2" OS-‐050-‐*-‐^ 0.55 (14.0) 0.50 (12.7) OR^-‐3-‐909 0.08 (0.04) 3/4" OS-‐075-‐*-‐^ 0.79 (20.1) 0.50 (12.7) OR^-‐3-‐913 0.18 (0.08) 1” OS-‐100-‐*-‐^ 0.91 (23.1) 0.50 (12.7) OR^-‐3-‐916 0.15 (0.07)

1 1/4" OS-‐125-‐*-‐^ 1.18 (30.0) 0.50 (12.7) OR^-‐3-‐918 0.26 (0.12) 1 1/2” OS-‐150-‐*-‐^ 1.54 (39.1) 0.50 (12.7) OR^-‐3-‐924 0.33 (0.15) 2” OS-‐200-‐*-‐^ 1.91 (48.5) 0.50 (12.7) OR^-‐3-‐928 0.43 (0.20)

2 1/2” OS-‐250-‐*-‐^ 2.36 (59.9) 1.00 (25.4) OR^-‐2-‐232 1.17 (0.53) 3” OS-‐300-‐*-‐^ 2.88 (73.2) 1.00 (25.4) OR^-‐2-‐237 1.70 (0.77)

* Materials: • Standard, No Designation = All Carbon Steel, Clear Zinc Plated (Cr6 Free). • SS = All Stainless Steel, Type 316. ^ O-‐Ring Type: • Standard, No Designation = Buna Nitrile. • V = Viton.

Ordering Example: OSA-‐200-‐SS-‐V

* Insert Material


DRAFT

Ordering Example: OS-200-SS-V

* Insert Material




OS – O-Ring Spacer for Retain Ring Pipe Flange Connection


OS O-‐Ring Spacer for Retain Ring Pipe – 1/2"-‐ 3" Complete with Buna O-‐Rings

Dimensions in (mm)

Size

Part No.

D L


WT lbs (kg)

1/2" OS-‐050-‐*-‐^ 0.55 (14.0) 0.50 (12.7) OR^-‐3-‐909 0.08 (0.04) 3/4" OS-‐075-‐*-‐^ 0.79 (20.1) 0.50 (12.7) OR^-‐3-‐913 0.18 (0.08) 1” OS-‐100-‐*-‐^ 0.91 (23.1) 0.50 (12.7) OR^-‐3-‐916 0.15 (0.07)

1 1/4" OS-‐125-‐*-‐^ 1.18 (30.0) 0.50 (12.7) OR^-‐3-‐918 0.26 (0.12) 1 1/2” OS-‐150-‐*-‐^ 1.54 (39.1) 0.50 (12.7) OR^-‐3-‐924 0.33 (0.15) 2” OS-‐200-‐*-‐^ 1.91 (48.5) 0.50 (12.7) OR^-‐3-‐928 0.43 (0.20)

2 1/2” OS-‐250-‐*-‐^ 2.36 (59.9) 1.00 (25.4) OR^-‐2-‐232 1.17 (0.53) 3” OS-‐300-‐*-‐^ 2.88 (73.2) 1.00 (25.4) OR^-‐2-‐237 1.70 (0.77)


Ordering Example: OSA-‐200-‐SS-‐V

* Insert Material


DRAFT SAE 3000 PSI Retain Ring Flange Concentric Reducer Assembly SAE J518 Code 61 (ISO 6162-‐1)

CR Concentric Reducer Complete with Buna O-‐Rings (Standard)

Dimensions

in (mm) Size

Complete Assembly

Part No. L D D1

O-‐Ring 1

(Buna)

Part No.

O-‐Ring 2

(Buna)

Part No.

Assembly

WT

lbs (kg)

Body Only

Part No.

Body Only

WT

lbs (kg)

Working Pressure

PSI (bar)

3/4” x 1/2” A/CR-‐075x050-‐FC34-‐FC34-‐*-‐^ 3.72 (94.5) 0.79 (20.1) 0.42 (10.7) OR^-‐3-‐913 OR^-‐3-‐909 1.84 (0.83) CR-‐075x050-‐*-‐^ 0.88 (0.40) 5000 (350)

1” x 1/2” A/CR-‐100x050-‐FC34-‐FC34-‐*-‐^ 3.72 (94.5) 0.91 (23.1) 0.42 (10.7) OR^-‐3-‐916 OR^-‐3-‐909 2.06 (0.93) CR-‐100x050-‐*-‐^ 0.97 (0.44) 5000 (350)


1 1/4” x 3/4” A/CR-‐125x075-‐FC34-‐FC34-‐*-‐^ 4.50 (114.3) 1.18 (30.0) 0.62 (15.7) OR^-‐3-‐918 OR^-‐3-‐913 3.11 (1.41) CR-‐125x075-‐*-‐^ 1.71 (0.78) 4000 (280)

1 1/4” x 1” A/CR-‐125x100-‐FC34-‐FC34-‐*-‐^ 4.50 (114.3) 1.18 (30.0) 0.78 (19.8) OR^-‐3-‐918 OR^-‐3-‐916 3.43 (1.56) CR-‐125x100-‐*-‐^ 1.90 (0.86) 4000 (280)


1 1/2” x 1 1/4” A/CR-‐150x125-‐FC34-‐FC34-‐*-‐^ 5.26 (133.6) 1.54 (39.1) 1.05 (26.7) OR^-‐3-‐924 OR^-‐3-‐918 4.81 (2.18) CR-‐150x125-‐*-‐^ 2.56 (1.16) 4000 (280)

2” x 1 1/4” A/CR-‐200x125-‐FC34-‐FC34-‐*-‐^ 5.26 (133.6) 1.93 (49.0) 1.05 (26.7) OR^-‐3-‐928 OR^-‐3-‐918 6.42 (2.91) CR-‐200x125-‐*-‐^ 3.50 (1.59) 4000 (280)




3” x 2” A/CR-‐300x200-‐FC34-‐FC34-‐*-‐^ 6.98 (177.3) 2.88 (73.2) 1.80 (45.7) OR^-‐2-‐237 OR^-‐2-‐928 14.11 (6.40) CR-‐300x200-‐*-‐^ 7.70 (3.49) 3000 (210)





Ordering Example: A/CR-‐200x125-‐FC34-‐FC34-‐SS-‐V

Flange 1 Option

Flange 2 Option

* Insert Material


Complete Assembly Consists Of: • One (1) Concentric Reducer Body • Two (2) Retain Ring Flanges • One (1) Retain Ring • Two (2) Buna O-‐Rings (Standard)



DRAFT SAE 3000 PSI Retain Ring Flange Concentric Reducer Assembly SAE J518 Code 61 (ISO 6162-‐1)


Dimensions

in (mm) Size

Complete Assembly

Part No. L D D1

O-‐Ring 1

(Buna)

Part No.

O-‐Ring 2

(Buna)

Part No.

Assembly

WT

lbs (kg)

Body Only

Part No.

Body Only

WT

lbs (kg)

Working Pressure

PSI (bar)


















Flange 1 Option

Flange 2 Option

* Insert Material





DRAFT

TUBE-MAC.comG81


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

Size Part Number

Dimensionsin (mm) O-Ring (Buna)

Part NumberWT

lbs (kg)D L

1/2" OSH-050-*-^ 0.55 (14.0) 0.25 (6.4) OR^-3-909 0.04 (0.02)

3/4" OSH-075-*-^ 0.79 (20.1) 0.25 (6.4) OR^-3-913 0.07 (0.03)

1” OSH-100-*-^ 0.91 (23.1) 0.25 (6.4) OR^-3-916 0.08 (0.04)

1-1/4" OSH-125-*-^ 1.18 (30.0) 0.25 (6.4) OR^-3-918 0.09 (0.04)

1-1/2” OSH-150-*-^ 1.54 (39.1) 0.25 (6.4) OR^-3-924 0.12 (0.05)

2” OSH-200-*-^ 1.91 (48.5) 0.25 (6.4) OR^-3-928 0.20 (0.09)

2-1/2” OSH-250-*-^ 2.36 (59.9) 0.50 (12.7) OR^-2-232 0.58 (0.26)

3” OSH-300-*-^ 2.88 (73.2) 0.50 (12.7) OR^-2-237 0.85 (0.39)


OSH O-‐Ring Spacer for Retain Ring Pipe -‐ 1/2"-‐ 3" Complete with Buna O-‐Rings

Dimensions in (mm)

Size

Part No.

D L


WT lbs (kg)

1/2" OSH-‐050-‐*-‐^ 0.55 (14.0) 0.25 (6.4) OR^-‐3-‐909 0.04 (0.02) 3/4" OSH-‐075-‐*-‐^ 0.79 (20.1) 0.25 (6.4) OR^-‐3-‐913 0.07 (0.03) 1” OSH-‐100-‐*-‐^ 0.91 (23.1) 0.25 (6.4) OR^-‐3-‐916 0.08 (0.04)

1 1/4" OSH-‐125-‐*-‐^ 1.18 (30.0) 0.25 (6.4) OR^-‐3-‐918 0.09 (0.04) 1 1/2” OSH-‐150-‐*-‐^ 1.54 (39.1) 0.25 (6.4) OR^-‐3-‐924 0.12 (0.05) 2” OSH-‐200-‐*-‐^ 1.91 (48.5) 0.25 (6.4) OR^-‐3-‐928 0.20 (0.09) 2 1/2” OSH-‐250-‐*-‐^ 2.36 (59.9) 0.50 (12.7) OR^-‐2-‐232 0.50 (0.23) 3” OSH-‐300-‐*-‐^ 2.88 (73.2) 0.50 (12.7) OR^-‐2-‐237 0.85 (0.39)


19

Ordering Example: OSH-‐200-‐SS-‐V

* Insert Material ^ Insert O-‐Ring Type

DRAFT

Ordering Example: OSH-200-SS-V

* Insert Material




SAE 3000 PSI O-Ring Spacerfor Retain Ring Pipe to Hose EndSAE J518 Code 61 (ISO 6162-1)

OSH – O-Ring Spacer for Retain Ring Pipe to Hose End


OSH O-‐Ring Spacer for Retain Ring Pipe -‐ 1/2"-‐ 3" Complete with Buna O-‐Rings

Dimensions in (mm)

Size

Part No.

D L


WT lbs (kg)

1/2" OSH-‐050-‐*-‐^ 0.55 (14.0) 0.25 (6.4) OR^-‐3-‐909 0.04 (0.02) 3/4" OSH-‐075-‐*-‐^ 0.79 (20.1) 0.25 (6.4) OR^-‐3-‐913 0.07 (0.03) 1” OSH-‐100-‐*-‐^ 0.91 (23.1) 0.25 (6.4) OR^-‐3-‐916 0.08 (0.04)

1 1/4" OSH-‐125-‐*-‐^ 1.18 (30.0) 0.25 (6.4) OR^-‐3-‐918 0.09 (0.04) 1 1/2” OSH-‐150-‐*-‐^ 1.54 (39.1) 0.25 (6.4) OR^-‐3-‐924 0.12 (0.05) 2” OSH-‐200-‐*-‐^ 1.91 (48.5) 0.25 (6.4) OR^-‐3-‐928 0.20 (0.09) 2 1/2” OSH-‐250-‐*-‐^ 2.36 (59.9) 0.50 (12.7) OR^-‐2-‐232 0.50 (0.23) 3” OSH-‐300-‐*-‐^ 2.88 (73.2) 0.50 (12.7) OR^-‐2-‐237 0.85 (0.39)


19

Ordering Example: OSH-‐200-‐SS-‐V

* Insert Material ^ Insert O-‐Ring Type

DRAFT

G82TUBE-MAC.com


SAE 3000 PSI O-Ring Spacer with Pilot PortSAE J518 Code 61 (ISO 6162-1)

Size Part Number

Dimensionsin (mm)

O-Rings 1&2

(Buna)Part Number

WTlbs (kg)

D L

1/2" OSP-050-*-^ 0.55 (14.0) 1.50 (38.1) OR^-3-909 0.37 (0.17)

3/4" OSP-075-*-^ 0.79 (20.1) 1.50 (38.1) OR^-3-913 0.64 (0.29)

1” OSP-100-*-^ 0.91 (23.1) 1.50 (38.1) OR^-3-916 0.78 (0.35)

1-1/4" OSP-125-*-^ 1.18 (30.0) 1.50 (38.1) OR^-3-918 0.86 (0.39)

1-1/2” OSP-150-*-^ 1.54 (39.1) 1.50 (38.1) OR^-3-924 1.40 (0.64)

2” OSP-200-*-^ 1.91 (48.5) 1.50 (38.1) OR^-3-928 1.49 (0.68)

2-1/2” OSP-250-*-^ 2.36 (59.9) 1.50 (38.1) OR^-2-232 1.98 (0.90)

3” OSP-300-*-^ 2.88 (73.2) 1.50 (38.1) OR^-2-237 2.50 (1.13)

SAE 3000 PSI O-‐Ring Spacer with Pilot PortSAE J518 Code 61 (ISO 6162-‐1)

OSP O-‐Ring Spacer with Pilot Port for Retain Ring Pipe -‐ 1/2"-‐ 3" Complete with Buna O-‐Rings (Standard) and #4 SAE Port (Plugged)


D L


WT lbs (kg)

1/2" OSP-‐050-‐*-‐^ 0.55 (14.0) 1.50 (38.1) OR^-‐3-‐909 0.37 (0.17) 3/4" OSP-‐075-‐*-‐^ 0.79 (20.1) 1.50 (38.1) OR^-‐3-‐913 0.64 (0.29) 1” OSP-‐100-‐*-‐^ 0.91 (23.1) 1.50 (38.1) OR^-‐3-‐916 0.78 (0.35)

1 1/4" OSP-‐125-‐*-‐^ 1.18 (30.0) 1.50 (38.1) OR^-‐3-‐918 0.86 (0.39) 1 1/2” OSP-‐150-‐*-‐^ 1.54 (39.1) 1.50 (38.1) OR^-‐3-‐924 1.40 (0.64) 2” OSP-‐200-‐*-‐^ 1.91 (48.5) 1.50 (38.1) OR^-‐3-‐928 1.49 (0.68)

2 1/2” OSP-‐250-‐*-‐^ 2.36 (59.9) 1.50 (38.1) OR^-‐2-‐232 1.98 (0.90) 3” OSP-‐300-‐*-‐^ 2.88 (73.2) 1.50 (38.1) OR^-‐2-‐237 2.50 (1.13)



Ordering Example: OSP-‐200-‐SS-‐V

* Insert Material


DRAFT

OSP - O-Ring Spacer with Pilot Port for Retain Ring Pipe - 1/2”- 3”Complete with Buna O-Rings (Standard) and #4 SAE Port (Plugged)

Ordering Example: OSP-200-SS-V

* Insert Material




Size Part Number

Dimensionsin (mm)

O-Rings 1&2

(Buna)Part Number

WTlbs (kg)

D L

1/2" OSPM-050-*-^ 0.55 (14.0) 1.50 (38.1) OR^-3-909 0.37 (0.17)

3/4" OSPM-075-*-^ 0.79 (20.1) 1.50 (38.1) OR^-3-913 0.64 (0.29)

1” OSPM-100-*-^ 0.91 (23.1) 1.50 (38.1) OR^-3-916 0.78 (0.35)

1-1/4" OSPM-125-*-^ 1.18 (30.0) 1.50 (38.1) OR^-3-918 0.86 (0.39)

1-1/2” OSPM-150-*-^ 1.54 (39.1) 1.50 (38.1) OR^-3-924 1.40 (0.64)

2” OSPM-200-*-^ 1.91 (48.5) 1.50 (38.1) OR^-3-928 1.49 (0.68)

2-1/2” OSPM-250-*-^ 2.36 (59.9) 1.50 (38.1) OR^-2-232 1.98 (0.90)

3” OSPM-300-*-^ 2.88 (73.2) 1.50 (38.1) OR^-2-237 2.50 (1.13)

OSPM - O-Ring Spacer with Metric Pilot Port for Retain Ring Pipe - 1/2”- 3”Complete with Buna O-Rings (Standard) and G1/8 Port (Plugged)

Ordering Example: OSPM-200-SS-V

* Insert Material




TUBE-MAC.comG83


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Retain Ring Flange BulkheadSAE J518 Code 61 (ISO 6162-1)

Size Complete Part Number

Dimensionsin (mm)

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)

Working PressurePSI (bar)L1 L2 D

1/2" A/RFBH-050-FC34-FC34-*-^ 5.69 (144.6) 6.69 (170) 1.02 (26) 2.16 (0.98) RFBH-050-*-^ 1.08 (0.49) 5000 (350)

3/4" A/RFBH-075-FC34-FC34-*-^ 5.69 (144.6) 6.69 (170) 1.42 (36) 3.36 (1.52) RFBH-075-*-^ 2.00 (0.91) 5000 (350)

1" A/RFBH-100-FC34-FC34-*-^ 5.69 (144.6) 6.69 (170) 1.54 (39) 3.45 (1.56) RFBH-100-*-^ 1.80 (0.82) 5000 (350)

1-1/4" A/RFBH-125-FC34-FC34-*-^ 6.09 (154.6) 7.09 (180) 1.81 (46) 4.92 (2.23) RFBH-125-*-^ 2.60 (1.18) 4000 (280)

1-1/2" A/RFBH-150-FC34-FC34-*-^ 6.09 (154.6) 7.09 (180) 2.20 (56) 6.67 (3.03) RFBH-150-*-^ 3.31 (1.50) 4000 (280)

2" A/RFBH-200-FC34-FC34-*-^ 7.27 (184.6) 8.27 (210) 2.60 (66) 9.70 (4.40) RFBH-200-*-^ 4.80 (2.18) 4000 (280)

2-1/2" A/RFBH-250-FC34-FC34-*-^ 6.66 (169.2) 8.66 (220) 3.15 (80) 14.80 (6.71) RFBH-250-*-^ 7.00 (3.18) 3000 (210)

3" A/RFBH-300-FC34-FC34-*-^ 7.45 (189.2) 9.45 (240) 3.82 (97) 22.48 (10.20) RFBH-300-*-^ 10.30 (4.67) 3000 (210)

Complete Assembly Consists Of:• One (1) retain ring flange

bulkhead body• Two (2) retain ring flanges• Two (2) retain rings• Two (2) o-ring spacers





Ordering Example: A/RFBH-050-FC34-FC34-SS-V

Flange 1 Option

Flange 2 Option

* Insert Material


A/RFBH - Retain Ring Flange Bulkhead

G84TUBE-MAC.com


SAE 3000 PSI Retain Ring Flange Concentric Reducer AssemblySAE J518 Code 61 (ISO 6162-1)

Size Complete Assembly Part Number

Dimensions in (mm)

O-Ring 1 (Buna)

Part Number

O-Ring 2 (Buna)

Part Number

AssemblyWT

lbs (kg)


Body OnlyWT

lbs (kg)


3/4” x 1/2” A/CR-075x050-FC34-FC34-*-^ 3.72 (94.5) OR^-3-913 OR^-3-909 1.84 (0.83) CR-075x050-*-^ 0.88 (0.40) 5000 (350)

1” x 1/2” A/CR-100x050-FC34-FC34-*-^ 3.72 (94.5) OR^-3-916 OR^-3-909 2.06 (0.93) CR-100x050-*-^ 0.97 (0.44) 5000 (350)

1” x 3/4” A/CR-100x075-FC34-FC34-*-^ 4.50 (114.3) OR^-3-916 OR^-3-913 2.49 (1.13) CR-100x075-*-^ 1.49 (0.68) 5000 (350)

1-1/4” x 3/4” A/CR-125x075-FC34-FC34-*-^ 4.50 (114.3) OR^-3-918 OR^-3-913 3.11 (1.41) CR-125x075-*-^ 1.71 (0.78) 4000 (280)

1-1/4” x 1” A/CR-125x100-FC34-FC34-*-^ 4.50 (114.3) OR^-3-918 OR^-3-916 3.43 (1.56) CR-125x100-*-^ 1.90 (0.86) 4000 (280)

1-1/2” x 1” A/CR-150x100-FC34-FC34-*-^ 4.50 (114.3) OR^-3-924 OR^-3-916 4.04 (1.86) CR-150x100-*-^ 2.11 (0.96) 4000 (280)

1-1/2” x 1 1/4” A/CR-150x125-FC34-FC34-*-^ 5.26 (133.6) OR^-3-924 OR^-3-918 4.81 (2.18) CR-150x125-*-^ 2.56 (1.16) 4000 (280)

2” x 1 1/4” A/CR-200x125-FC34-FC34-*-^ 5.26 (133.6) OR^-3-928 OR^-3-918 6.42 (2.91) CR-200x125-*-^ 3.50 (1.59) 4000 (280)


2 1/2” x 1 1/2” A/CR-250x100-FC34-FC34-*-^ 6.06 (153.9) OR^-2-232 OR^-2-924 8.01 (3.63) CR-250x100-*-^ 4.67 (2.12) 3000 (210)

2 1/2” x 2” A/CR-250x200-FC34-FC34-*-^ 6.06 (153.9) OR^-2-232 OR^-2-928 9.72 (4.41) CR-250x200-*-^ 5.20 (2.36) 3000 (210)

3” x 2” A/CR-300x200-FC34-FC34-*-^ 6.98 (177.3) OR^-2-237 OR^-2-928 14.11 (6.40) CR-300x200-*-^ 7.70 (3.49) 3000 (210)



4” x 3” A/CR-400x300-FC34-FC34-*-^ 7.76 (197.1) OR^-2-241 OR^-2-237 24.49 (11.11) CR-400x300-*-^ 14.50 (6.58) 500 (35)




SAE 3000 PSI Retain Ring Flange Concentric Reducer Assembly SAE J518 Code 61 (ISO 6162-‐1)


Dimensions

in (mm) Size

Complete Assembly

Part No. L D D1

O-‐Ring 1

(Buna)

Part No.

O-‐Ring 2

(Buna)

Part No.

Assembly

WT

lbs (kg)

Body Only

Part No.

Body Only

WT

lbs (kg)

Working Pressure

PSI (bar)


















Flange 1 Option

Flange 2 Option

* Insert Material





DRAFT

Ordering Example: A/CR-200x125-FC34-FC34-SS-V

Flange 1 Option

Flange 2 Option

* Insert Material


Complete Assembly Consists Of:• One (1) Concentric Reducer Body• Two (2) Retain Ring Flanges• One (1) Retain Ring• Two (2) Buna O-Rings (Standard)


A/CR – Retain Ring Flange Concentric Reducer Assembly

TUBE-MAC.comG85


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n



Ordering Example: BFO34-200-SS-V

* Insert Material


Size Blanking Flange Part Number

Dimensions (in) Bolt SizeJ

O-Ring(Buna)

Part Number


WT lbs (kg)A B G H E

1/2" BFO34-050-*-^ 0.69 1.50 1.88 2.23 0.81 5/16” OR^-2-210 5000 (350) 0.64 (0.29)

3/4" BFO34-075-*-^ 0.88 1.88 2.06 2.56 0.82 3/8” OR^-2-214 5000 (350) 0.80 (0.36)

1" BFO34-100-*-^ 1.03 2.06 2.31 2.76 0.87 3/8” OR^-2-219 5000 (350) 1.10 (0.50)

1-1/4" BFO34-125-*-^ 1.19 2.31 2.88 3.11 0.91 7/16” OR^-2-222 4000 (280) 1.84 (0.83)

1-1/2" BFO34-150-*-^ 1.41 2.75 3.25 3.66 1.06 1/2” OR^-2-225 4000 (280) 2.57 (1.17)

2" BFO34-200-*-^ 1.69 3.06 3.81 4.02 1.22 1/2” OR^-2-228 4000 (280) 3.89 (1.76)

2-1/2" BFO34-250-*-^ 2.00 3.50 4.28 4.49 1.40 1/2” OR^-2-232 3000 (210) 5.98 (2.71)

3" BFO34-300-*-^ 2.44 4.19 5.16 5.28 1.67 5/8” OR^-2-237 3000 (210) 10.00 (4.54)

BFO34 – Blanking Flange O-Ring Face with Clearance Holes and #4 SAE Port (Plugged), NPS

SAE 3000 PSI Blanking FlangeO-Ring Face with Clearance Holes SAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Blanking Flange O-‐Ring Face with Clearance Holes SAE J518 Code 61 (ISO 6162-‐1)

BFO34 – Blanking Flange O-‐Ring Face with Clearance Holes and #4 SAE Port (Plugged), NPS

BFOM34 – Blanking Flange O-‐Ring Face with Clearance Holes and G1/4 BSPP Port (Plugged), Metric



Dimensions (in) Drill

Dia.(in) J

Size Blanking Flange Part No.

A B G H E

O-‐Ring (Buna)

Part No.


WT lbs (kg)

1/2" BFO34-‐050-‐*-‐^ 0.69 1.50 1.88 2.23 0.81 0.35 OR^-‐2-‐210 5000 (350) 0.64 (0.29) 3/4" BFO34-‐075-‐*-‐^ 0.88 1.88 2.06 2.56 0.82 0.43 OR^-‐2-‐214 5000 (350) 0.80 (0.36) 1" BFO34-‐100-‐*-‐^ 1.03 2.06 2.31 2.76 0.87 0.43 OR^-‐2-‐219 5000 (350) 1.10 (0.50)

1 1/4" BFO34-‐125-‐*-‐^ 1.19 2.31 2.88 3.11 0.91 0.47 OR^-‐2-‐222 4000 (280) 1.84 (0.83) 1 1/2" BFO34-‐150-‐*-‐^ 1.41 2.75 3.25 3.66 1.06 0.53 OR^-‐2-‐225 4000 (280) 2.57 (1.17)

2" BFO34-‐200-‐*-‐^ 1.69 3.06 3.81 4.02 1.22 0.53 OR^-‐2-‐228 4000 (280) 3.89 (1.76) 2 1/2" BFO34-‐250-‐*-‐^ 2.00 3.50 4.28 4.49 1.40 0.53 OR^-‐2-‐232 3000 (210) 5.98 (2.71)

3" BFO34-‐300-‐*-‐^ 2.44 4.19 5.16 5.28 1.67 0.67 OR^-‐2-‐237 3000 (210) 10.00 (4.54)

Dimensions (mm) Drill

Dia.(mm) J

Size Blanking Flange Part No.

A B G H E

O-‐Ring (Buna)

Part No.


WT Lbs (kg)

1/2" BFOM34-‐050-‐*-‐^ 17.5 38.1 47.8 56.6 20.6 9.0 OR^-‐2-‐210 5000 (350) 0.64 (0.29) 3/4" BFOM34-‐075-‐*-‐^ 22.4 47.8 52.3 65.0 20.8 11.0 OR^-‐2-‐214 5000 (350) 0.80 (0.36) 1" BFOM34-‐100-‐*-‐^ 26.2 52.3 58.7 70.1 22.1 11.0 OR^-‐2-‐219 5000 (350) 1.10 (0.50)

1 1/4" BFOM34-‐125-‐*-‐^ 30.2 58.7 73.2 79.0 23.1 11.0 OR^-‐2-‐222 4000 (280) 1.84 (083) 1 1/2" BFOM34-‐150-‐*-‐^ 35.8 69.9 82.6 93.0 26.9 13.5 OR^-‐2-‐225 4000 (280) 2.59 (1.17)

2" BFOM34-‐200-‐*-‐^ 42.9 77.7 96.8 102.1 31.0 13.5 OR^-‐2-‐228 4000 (280) 3.89 (1.76) 2 1/2" BFOM34-‐250-‐*-‐^ 50.8 88.9 108.7 114.0 35.6 13.5 OR^-‐2-‐232 3000 (210) 5.98 (2.71)

3" BFOM34-‐300-‐*-‐^ 62.0 106.4 131.1 134.1 42.4 17 OR^-‐2-‐237 3000 (210) 10.00 (4.54)

Ordering Example: BFO34-‐200-‐SS-‐V

* Insert Material


DRAFT


Dimensions (mm) Bolt SizeJ

O-Ring(Buna)

Part Number



1/2" BFOM34-050-*-^ 17.5 38.1 47.8 56.6 20.6 M8 OR^-2-210 5000 (350) 0.64 (0.29)

3/4" BFOM34-075-*-^ 22.4 47.8 52.3 65.0 20.8 M10 OR^-2-214 5000 (350) 0.80 (0.36)

1" BFOM34-100-*-^ 26.2 52.3 58.7 70.1 22.1 M10 OR^-2-219 5000 (350) 1.10 (0.50)

1-1/4" BFOM34-125-*-^ 30.2 58.7 73.2 79.0 23.1 M10 OR^-2-222 4000 (280) 1.84 (083)

1-1/2" BFOM34-150-*-^ 35.8 69.9 82.6 93.0 26.9 M12 OR^-2-225 4000 (280) 2.59 (1.17)

2" BFOM34-200-*-^ 42.9 77.7 96.8 102.1 31.0 M12 OR^-2-228 4000 (280) 3.89 (1.76)

2-1/2" BFOM34-250-*-^ 50.8 88.9 108.7 114.0 35.6 M12 OR^-2-232 3000 (210) 5.98 (2.71)

3" BFOM34-300-*-^ 62.0 106.4 131.1 134.1 42.4 M16 OR^-2-237 3000 (210) 10.00 (4.54)

BFOM34 – Blanking Flange O-Ring Face with Clearance Holes and G1/4 BSPP Port (Plugged), Metric

G86TUBE-MAC.com





J



1/2" BFF34-050-*-^ 0.69 1.50 1.88 2.23 0.81 5/16”-18 5000 (350) 0.64 (0.29)

3/4" BFF34-075-*-^ 0.88 1.88 2.06 2.56 0.82 3/8”-16 5000 (350) 0.80 (0.36)

1" BFF34-100-*-^ 1.03 2.06 2.31 2.76 0.87 3/8”-16 5000 (350) 1.10 (0.50)

1-1/4" BFF34-125-*-^ 1.19 2.31 2.88 3.11 0.91 7/16”-14 4000 (280) 1.84 (0.83)

1-1/2" BFF34-150-*-^ 1.41 2.75 3.25 3.66 1.06 1/2"-13 4000 (280) 2.57 (1.17)

2" BFF34-200-*-^ 1.69 3.06 3.81 4.02 1.22 1/2”-13 4000 (280) 3.89 (1.76)

2-1/2" BFF34-250-*-^ 2.00 3.50 4.28 4.49 1.40 1/2"-13 3000 (210) 6.23 (2.83)

3" BFF34-300-*-^ 2.44 4.19 5.16 5.28 1.67 5/8”-11 3000 (210) 10.00 (4.54)

BFF34 – Blanking Flange Flat Face with #4 SAE Port (Plugged) and UNC Threaded Holes, NPS

SAE 3000 PSI Blanking FlangeFlat Face with Threaded Holes SAE J518 Code 61 (ISO 6162-1)

SAE 3000 PSI Blanking Flange Flat Face with Threaded Holes SAE J518 Code 61 (ISO 6162-‐1)

BFF34 – Blanking Flange Flat Face with #4 SAE Port (Plugged) and UNC Threaded Holes

BFFM34 – Blanking Flange Flat Face with G1/4 BSPP Port (Plugged) and Threaded Holes, Metric


Dimensions (in) THREAD UNC-‐2B

J Size Blanking Flange

Part No.

A B G H E


WT lbs (kg)

1/2" BFF34-‐050-‐*-‐^ 0.69 1.50 1.88 2.23 0.81 5/16”-‐18 5000 (350) 0.64 (0.29) 3/4" BFF34-‐075-‐*-‐^ 0.88 1.88 2.06 2.56 0.82 3/8”-‐16 5000 (350) 0.80 (0.36) 1" BFF34-‐100-‐*-‐^ 1.03 2.06 2.31 2.76 0.87 3/8”-‐16 5000 (350) 1.10 (0.50)

1 1/4" BFF34-‐125-‐*-‐^ 1.19 2.31 2.88 3.11 0.91 7/16”-‐14 4000 (280) 1.84 (0.83) 1 1/2" BFF34-‐150-‐*-‐^ 1.41 2.75 3.25 3.66 1.06 1/2"-‐13 4000 (280) 2.57 (1.17) 2" BFF34-‐200-‐*-‐^ 1.69 3.06 3.81 4.02 1.22 1/2”-‐13 4000 (280) 3.89 (1.76)

2 1/2" BFF34-‐250-‐*-‐^ 2.00 3.50 4.28 4.49 1.40 1/2"-‐13 3000 (210) 6.23 (2.83) 3" BFF34-‐300-‐*-‐^ 2.44 4.19 5.16 5.28 1.67 5/8”-‐11 3000 (210) 10.00 (4.54)

Dimensions (mm) THREAD

J Size Blanking Flange

Part No.

A B G H E


WT Lbs (kg)

1/2" BFFM34-‐050-‐*-‐^ 17.5 38.1 47.8 56.6 20.6 M8X1.25 5000 (350) 0.64 (0.29) 3/4" BFFM34-‐075-‐*-‐^ 22.4 47.8 52.3 65.0 20.8 M10X1.50 5000 (350) 0.80 (0.36) 1" BFFM34-‐100-‐*-‐^ 26.2 52.3 58.7 70.1 22.1 M10X1.50 5000 (350) 1.10 (0.50)

1 1/4" BFFM34-‐125-‐*-‐^ 30.2 58.7 73.2 79.0 23.1 M10X1.50 4000 (280) 1.84 (0.83) 1 1/2" BFFM34-‐150-‐*-‐^ 35.8 69.9 82.6 93.0 26.9 M12X1.75 4000 (280) 2.57 (1.17) 2" BFFM34-‐200-‐*-‐^ 42.9 77.7 96.8 102.1 31.0 M12X1.75 4000 (280) 3.89 (1.76)

2 1/2" BFFM34-‐250-‐*-‐^ 50.8 88.9 108.7 114.0 35.6 M12X1.75 3000 (210) 6.23 (2.83) 3" BFFM34-‐300-‐*-‐^ 62.0 106.4 131.1 134.1 42.4 M16X2.00 3000 (210) 10.00 (4.54)

Ordering Example: BFF34-‐200-‐SS

* Insert Material

DRAFT


Dimensions (mm) ThreadJ



1/2" BFFM34-050-*-^ 17.5 38.1 47.8 56.6 20.6 M8X1.25 5000 (350) 0.64 (0.29)

3/4" BFFM34-075-*-^ 22.4 47.8 52.3 65.0 20.8 M10X1.50 5000 (350) 0.80 (0.36)

1" BFFM34-100-*-^ 26.2 52.3 58.7 70.1 22.1 M10X1.50 5000 (350) 1.10 (0.50)

1-1/4" BFFM34-125-*-^ 30.2 58.7 73.2 79.0 23.1 M10X1.50 4000 (280) 1.84 (0.83)

1-1/2" BFFM34-150-*-^ 35.8 69.9 82.6 93.0 26.9 M12X1.75 4000 (280) 2.57 (1.17)

2" BFFM34-200-*-^ 42.9 77.7 96.8 102.1 31.0 M12X1.75 4000 (280) 3.89 (1.76)

2-1/2" BFFM34-250-*-^ 50.8 88.9 108.7 114.0 35.6 M12X1.75 3000 (210) 6.23 (2.83)

3" BFFM34-300-*-^ 62.0 106.4 131.1 134.1 42.4 M16X2.00 3000 (210) 10.00 (4.54)

BFFM34 – Blanking Flange Flat Face with G1/4 BSPP Port (Plugged) and Threaded Holes, Metric

Ordering Example: BFF34-200-SS

* Insert Material

TUBE-MAC.comG87


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

n

SAE 3000 PSI Split Flange Kits SAE J518 Code 61 (ISO 6162-1)

SFK34 Split Flange Kit

SFKM34 Split Flange Kit Metric



Size


Dimensions (in) Drill Dia. (in)

J

HHCS Min. Grade 5

UNC-2A

O-Ring(Buna)

Part No.

WT (lbs)

Working Pressure PSI (bar) A B C D E F G H L

1/2” SFK34-050-*-^ 0.34 1.50 1.21 0.96 0.51 0.24 0.90 2.12 0.75 0.34 5/16”-18 x 1.25 OR^-2-210 0.42 5000 (350)

3/4” SFK34-075-*-^ 0.44 1.88 1.53 1.26 0.55 0.24 1.03 2.56 0.87 0.42 3/8”-16 x 1.25 OR^-2-214 0.51 5000 (350)

1” SFK34-100-*-^ 0.51 2.06 1.78 1.51 0.63 0.29 1.15 2.75 0.94 0.42 3/8”-16 x 1.25 OR^-2-219 0.65 5000 (350)

1 1/4” SFK34-125-*-^ 0.59 2.31 2.03 1.72 0.55 0.29 1.44 3.12 0.87 0.47 7/16”-14 x 1.50 OR^-2-222 0.89 4000 (280)

1 1/2” SFK34-150-*-^ 0.70 2.75 2.41 2.00 0.63 0.29 1.62 3.69 0.98 0.53 1/2”-13 x 1.50 OR^-2-225 1.44 4000 (280)

2” SFK34-200-*-^ 0.84 3.06 2.84 2.47 0.63 0.36 1.90 4.00 1.02 0.53 1/2”-13 x 1.50 OR^-2-228 1.56 4000 (280)

2 1/2” SFK34-250-*-^ 1.00 3.50 3.34 2.95 0.75 0.36 2.14 4.50 1.50 0.53 1/2”-13 x 1.75 OR^-2-232 2.13 3000 (210)

3” SFK34-300-*-^ 1.22 4.19 4.03 3.58 0.87 0.36 2.58 5.31 1.61 0.66 5/8”-11 x 1.75 OR^-2-237 3.65 3000 (210)

Size


Dimensions (mm) Drill Dia. (mm)

J

HHCS Min. 10.9

O-Ring(Nitrile) Part No.

WT (kg)

Working Pressure PSI (bar) A B C D E F G H L

1/2” SFKM34-050-*-^ 8.6 38.1 30.7 24.4 13.0 6.1 22.9 53.8 19.1 8.6 M8 x 30 OR^-2-210 0.19 5000 (350)

3/4” SFKM34-075-*-^ 11.2 47.8 38.9 32.0 14.0 6.1 26.2 65.0 22.1 10.7 M10 x 30 OR^-2-214 0.23 5000 (350)

1” SFKM34-100-*-^ 13.0 52.3 45.2 38.4 16.0 7.4 29.2 69.9 23.9 10.7 M10 x 30 OR^-2-219 0.30 5000 (350)

1 1/4” SFKM34-125-*-^ 15.0 58.7 51.6 43.7 14.0 7.4 36.6 79.2 22.1 11.9 M10 x 40 OR^-2-222 0.40 4000 (280)

1 1/2” SFKM34-150-*-^ 17.8 69.9 61.2 50.8 16.0 7.4 41.1 93.7 24.9 13.5 M12 x 40 OR^-2-225 0.65 4000 (280)

2” SFKM34-200-*-^ 21.3 77.7 72.1 62.7 16.0 9.1 48.3 101.6 25.9 13.5 M12 x 40 OR^-2-228 0.71 4000 (280)

2 1/2” SFKM34-250-*-^ 25.4 88.9 84.8 74.9 19.1 9.1 54.4 114.3 38.1 13.5 M12 x 45 OR^-2-232 0.97 3000 (210)

3” SFKM34-300-*-^ 31.0 106.4 102.4 90.9 22.1 9.1 65.5 134.9 40.9 16.8 M16 x 45 OR^-2-237 1.66 3000 (210)

Ordering Example: SFK34-100-SS-V

* Insert Material


Complete Flange Set Includes: • One (1) Split Flange (2 Halves)• Four (4) Hex Head Bolts• Four (4) Lock Washers• One (1) Buna O-Ring (Standard)

DRAFT SAE 3000 PSI Split Flange KitsSAE J518 Code 61 (ISO 6162-1)



Ordering Example: SFK34-100-SS-V

* Insert Material



Part Number

Dimensions (in) Drill Dia. (in)J

HHCS Min. Grade 5 UNC-2A

O-Ring (Buna)

Part Number

WT(lbs)

Working PressurePSI (bar)A B C D E F G H L

1/2” SFK34-050-*-^ 0.34 1.50 1.21 0.96 0.51 0.24 0.90 2.12 0.75 0.34 5/16”-18 x 1.25 OR^-2-210 0.42 5000 (350)

3/4” SFK34-075-*-^ 0.44 1.88 1.53 1.26 0.55 0.24 1.03 2.56 0.87 0.42 3/8”-16 x 1.25 OR^-2-214 0.51 5000 (350)

1” SFK34-100-*-^ 0.51 2.06 1.78 1.51 0.63 0.29 1.15 2.75 0.94 0.42 3/8”-16 x 1.25 OR^-2-219 0.65 5000 (350)

1-1/4” SFK34-125-*-^ 0.59 2.31 2.03 1.72 0.55 0.29 1.44 3.12 0.87 0.47 7/16”-14 x 1.50 OR^-2-222 0.89 4000 (280)

1-1/2” SFK34-150-*-^ 0.70 2.75 2.41 2.00 0.63 0.29 1.62 3.69 0.98 0.53 1/2”-13 x 1.50 OR^-2-225 1.44 4000 (280)

2” SFK34-200-*-^ 0.84 3.06 2.84 2.47 0.63 0.36 1.90 4.00 1.02 0.53 1/2”-13 x 1.50 OR^-2-228 1.56 4000 (280)

2-1/2” SFK34-250-*-^ 1.00 3.50 3.34 2.95 0.75 0.36 2.14 4.50 1.50 0.53 1/2”-13 x 1.75 OR^-2-232 2.13 3000 (210)

3” SFK34-300-*-^ 1.22 4.19 4.03 3.58 0.87 0.36 2.58 5.31 1.61 0.66 5/8”-11 x 1.75 OR^-2-237 3.65 3000 (210)

Complete Flange Set Includes:• One (1) Split Flange (2 Halves)• Four (4) Hex Head Bolts• Four (4) Lock Washers• One (1) Buna O-Ring (Standard)

SFK34 - Split Flange Kit, NPS


Part Number

Dimensions (mm) Drill Dia. (mm)

J

HHCS Min. 10.9

O-Ring (Nitrile)

Part Number

WT(kg)

Working PressurePSI (bar)A B C D E F G H L

1/2” SFKM34-050-*-^ 8.6 38.1 30.7 24.4 13.0 6.1 22.9 53.8 19.1 8.6 M8 x 30 OR^-2-210 0.19 5000 (350)

3/4” SFKM34-075-*-^ 11.2 47.8 38.9 32.0 14.0 6.1 26.2 65.0 22.1 10.7 M10 x 30 OR^-2-214 0.23 5000 (350)

1” SFKM34-100-*-^ 13.0 52.3 45.2 38.4 16.0 7.4 29.2 69.9 23.9 10.7 M10 x 30 OR^-2-219 0.30 5000 (350)

1-1/4” SFKM34-125-*-^ 15.0 58.7 51.6 43.7 14.0 7.4 36.6 79.2 22.1 11.9 M10 x 40 OR^-2-222 0.40 4000 (280)

1-1/2” SFKM34-150-*-^ 17.8 69.9 61.2 50.8 16.0 7.4 41.1 93.7 24.9 13.5 M12 x 40 OR^-2-225 0.65 4000 (280)

2” SFKM34-200-*-^ 21.3 77.7 72.1 62.7 16.0 9.1 48.3 101.6 25.9 13.5 M12 x 40 OR^-2-228 0.71 4000 (280)

2-1/2” SFKM34-250-*-^ 25.4 88.9 84.8 74.9 19.1 9.1 54.4 114.3 38.1 13.5 M12 x 45 OR^-2-232 0.97 3000 (210)

3” SFKM34-300-*-^ 31.0 106.4 102.4 90.9 22.1 9.1 65.5 134.9 40.9 16.8 M16 x 45 OR^-2-237 1.66 3000 (210)

SFKM34 - Split Flange Kit Metric

G88TUBE-MAC.com


SAE 3000 PSI Split Flange Plugs SAE J518 Code 61 (ISO 6162-1)


Dimensions (in) O-Ring(Buna)

Part Number

WorkingPressurePSI (bar)

WTlbs (kg)L

1/2" SFP34-050-^ 0.75 OR^-2-210 5000 (350) 0.13 (0.06)

3/4" SFP34-075-^ 0.88 OR^-2-214 5000 (350) 0.28 (0.13)

1" SFP34-100-^ 1.00 OR^-2-219 5000 (350) 0.50 (0.23)

1-1/4" SFP34-125-^ 0.88 OR^-2-222 4000 (280) 0.57 (0.26)

1-1/2" SFP34-150-^ 1.00 OR^-2-225 4000 (280) 0.91 (0.41)

2" SFP34-200-^ 1.00 OR^-2-228 4000 (280) 1.40 (0.64)

2-1/2" SFP34-250-^ 1.00 OR^-2-232 3000 (210) 2.00 (0.91)

3" SFP34-300-^ 1.00 OR^-2-237 3000 (210) 2.90 (1.32)

SAE 3000 PSI Split Flange Plugs SAE J518 Code 61 (ISO 6162-‐1)

SFP34 Complete with Buna O-‐Ring (Standard) and #4 SAE Port (Plugged)

SFPM34 Complete with Nitrile O-‐Ring (Standard) and G1/8 BSPP Port (Plugged) Metric


Dimensions (in) Size Blanking Flange

Part No. L



WT lbs (kg)

1/2" SFP34-‐050-‐^ 0.75 OR^-‐2-‐210 5000 (350) 0.13 (0.06)

3/4" SFP34-‐075-‐^ 0.88 OR^-‐2-‐214 5000 (350) 0.28 (0.13)

1" SFP34-‐100-‐^ 1.00 OR^-‐2-‐219 5000 (350) 0.50 (0.23)

1 1/4" SFP34-‐125-‐^ 0.88 OR^-‐2-‐222 4000 (280) 0.57 (0.26)

1 1/2" SFP34-‐150-‐^ 1.00 OR^-‐2-‐225 4000 (280) 0.91 (0.41)

2" SFP34-‐200-‐^ 1.00 OR^-‐2-‐228 4000 (280) 1.40 (0.64)

2 1/2" SFP34-‐250-‐^ 1.00 OR^-‐2-‐232 3000 (210) 2.00 (0.91)

3" SFP34-‐300-‐^ 1.00 OR^-‐2-‐237 3000 (210) 2.90 (1.32)

Dimensions (mm) Size Blanking Flange

Part No. L

O-‐Ring (Nitrile) Part No.


WT (kg)

1/2" SFPM34-‐050-‐^ 19.1 OR^-‐2-‐210 5000 (350) 0.13 (0.06)

3/4" SFPM34-‐075-‐^ 22.4 OR^-‐2-‐214 5000 (350) 0.28 (0.13)

1" SFPM34-‐100-‐^ 25.4 OR^-‐2-‐219 5000 (350) 0.50 (0.23)

1 1/4" SFPM34-‐125-‐^ 22.4 OR^-‐2-‐222 4000 (280) 0.57 (0.26)

1 1/2" SFPM34-‐150-‐^ 25.4 OR^-‐2-‐225 4000 (280) 0.91 (0.41)

2" SFPM34-‐200-‐^ 25.4 OR^-‐2-‐228 4000 (280) 1.40 (0.64)

2 1/2" SFPM34-‐250-‐^ 25.4 OR^-‐2-‐232 3000 (210) 2.00 (0.91)

3" SFPM34-‐300-‐^ 25.4 OR^-‐2-‐237 3000 (210) 2.90 (1.32)

Ordering Example: SFP34-‐200-‐-‐V


DRAFT


Ordering Example: SFP34-200-V



Dimensions (mm) O-Ring(Nitrile)

Part Number

WorkingPressurePSI (bar)

WT(kg)L

1/2" SFPM34-050-^ 19.1 OR^-2-210 5000 (350) 0.13 (0.06)

3/4" SFPM34-075-^ 22.4 OR^-2-214 5000 (350) 0.28 (0.13)

1" SFPM34-100-^ 25.4 OR^-2-219 5000 (350) 0.50 (0.23)

1-1/4" SFPM34-125-^ 22.4 OR^-2-222 4000 (280) 0.57 (0.26)

1-1/2" SFPM34-150-^ 25.4 OR^-2-225 4000 (280) 0.91 (0.41)

2" SFPM34-200-^ 25.4 OR^-2-228 4000 (280) 1.40 (0.64)

2-1/2" SFPM34-250-^ 25.4 OR^-2-232 3000 (210) 2.00 (0.91)

3" SFPM34-300-^ 25.4 OR^-2-237 3000 (210) 2.90 (1.32)

SFPM34 - Complete with Nitrile O-Ring (Standard) and G1/8 BSPP Port (Plugged), Metric

SFP34 - Complete with Buna O-Ring (Standard) and #4 SAE Port (Plugged), NPS

TUBE-MAC.comG89


Mac

hine

sVa

lves,

Ball

and

Chec

kCl

amps

ISO

6164

, 40

0 ba

rSA

E 10

000,

SA

E 60

00,

420

bar

SAE

3000

, 21

0 ba

rSA

E 10

00,

70 b

arAN

SI 1

50#,

30

0# F

lare

16 b

ar,

90º F

lare

Pipe

Se

lect

ion

Guid

e

Tech

nica

l Da

taIn

trodu

ctio

nSAE 3000 PSI Non-Conductive Connector Plate with Bolt IsolationSAE J518 Code 61 (ISO 6162-1)

Notes:Flanges, Cone Inserts and Bolts Sold SeparatelyMust use Two (2) O-Ring Face Cone Inserts

Size Part NumberDimensions in (mm)

WTlbs (kg)A B D E

1/2" NCCP34-050 0.69 (17.53) 1.50 (38.10) 0.50 (12.70) 0.12 (3.05) 0.09 (0.04)

3/4" NCCP34-075 0.88 (22.35) 1.88 (47.75) 0.75 (19.05) 0.12 (3.05) 0.12 (0.05)

1" NCCP34-100 1.03 (26.16) 2.06 (52.32) 0.94 (23.88) 0.12 (3.05) 0.14 (0.06)

1-1/4" NCCP34-125 1.19 (30.23) 2.31 (58.67) 1.25 (31.75) 0.12 (3.05) 0.20 (0.09)

1-1/2" NCCP34-150 1.41 (35.81) 2.75 (69.85) 1.50 (38.10) 0.12 (3.05) 0.28 (0.13)

2" NCCP34-200 1.69 (42.93) 3.06 (77.72) 1.94 (49.28) 0.12 (3.05) 0.33 (0.15)

NCCP – Non-Conductive Connector Plate

SAE 3000 PSI Non-‐Conductive Connector Plate with Bolt Isolation SAE J518 Code 61 (ISO 6162-‐1)

NCCP – Non-‐Conductive Connector Plate

Notes

• Flanges, Cone Inserts and Bolts Sold Separately • Must use Two (2) O-‐Ring Face Cone Inserts


A B D E

WT lbs (kg)

1/2" NCCP34-‐050 0.69 (17.53) 1.50 (38.10) 0.50 (12.70) 0.12 (3.05) 0.09 (0.04) 3/4" NCCP34-‐075 0.88 (22.35) 1.88 (47.75) 0.75 (19.05) 0.12 (3.05) 0.12 (0.05)

1" NCCP34-‐100 1.03 (26.16) 2.06 (52.32) 0.94 (23.88) 0.12 (3.05) 0.14 (0.06)

1 1/4" NCCP34-‐125 1.19 (30.23) 2.31 (58.67) 1.25 (31.75) 0.12 (3.05) 0.20 (0.09)

1 1/2" NCCP34-‐150 1.41 (35.81) 2.75 (69.85) 1.50 (38.10) 0.12 (3.05) 0.28 (0.13) 2" NCCP34-‐200 1.69 (42.93) 3.06 (77.72) 1.94 (49.28) 0.12 (3.05) 0.33 (0.15)

Complete Set Includes:

• One (1) Non-‐Conductive Plate • Four (4) Sleeves for Bolts • Four (4) Washers for Bolts

Complete Set Includes:• One (1) Non-Conductive Plate• Four (4) Sleeves for Bolts• Eight (8) Washers for Bolts

sae 3000 psi, 210 bar reference guide - tube-mac tmi 3000 se… · tube-mac.com g1 3d step models...

Documents