s200m dc, mcb for dc application top performance with high ... · use in direct current circuits |...

S200M DC, MCB for DC applicationTop performance with high breaking capacity

The MCB for Extra performanceThe S200M DC range can be fitted with auxiliary and signal contact, remote control mechanism, shunt trip and under voltage release.

International ApprovalsThe result of an enormous performance, The S200M DC has got international approval from VDE

Clearly BetterActuation and indication of the contact position is performed in a clear and unambiguous manner. The position of the toggle and the red/green display leave no doubt about the present switching position thus providing always reliable information in the event of an error.

Miniature Circuit Breaker S200M DCTechnical features

Captive screws: don’t loose what’simportant for you.

Quick identification thanks to laser printed EAN marking.

Whatever your application need is – applicable with a wide range of accessories.

Real contact position indication

Twin terminal for separate feeding of busbar and conductor

IP20 - finger safety.

Save your time – all important data available right away.

Easy product name, easy identification, easy life.

VDE Approval printed on the dome

Visibly safeWith the permanent magnets used for arc extinguishing, it is necessary to take into account, the polarity for successfully extinguishing the arc.Bold and reliable Laser marking of the polarity on the device near the terminals allows easy and safe installation of these MCBs.

Connecting to more powerThe optimized connection terminal of the S200M DC enables connection with wires up to 35 mm2 and busbars of 10 mm2.

2 S200M DC Flyer | Technical features

Performance in actionS200 M DC MCB in System pro Mcompact range impresses with itsperformance range, approvals and highinbuilt short circuit breaking capacityin DC applications. S200 M DC MCBscan be used in 1-pole version at 220VDC and in 2-pole version at 440V DC.

Miniature Circuit Breaker S200M DCTechnical Data

Dimensions and Weight

Mounting dimensions acc. To DIN 43880 1

Pole dimensions ( H X D X W ) 85 X 69 X 17.5

Pole weight approx. 125g

Installation

Terminal Fail safe bi-directional cylinder - lift terminal

Cross-section of conductors (top / bottom) Solid, Stranded: 35 mm2 / 35 mm2

Flexible 25 mm2 / 25 mm2

Cross-section of busbars (top / bottom) 10 mm2 / 10 mm2

Torque 2.8 Nm

Screwdriver No. 2 Pozidrive

Mounting On DIN rail 35 mm acc. to EN 60715 by fast clip

Mounting position any

Supply Please note polarity of the device

Combination with Auxiliary elements

Auxiliary contact Yes

Signal contact Yes

Shunt trip Yes

Undervoltage release Yes

Motor operating device Yes

Mechanical Data

Housing Insulation group I, RAL 7035

Toggle Insulation group II, black ,sealable

Contact position indication Marking on toggle (1 ON / 0 OFF), Real CPI (red ON / green OFF)

Protection degree acc. to DIN En 60529 IP20, IP40 in enclosure with cover

Mechanical endurance 20,000 ops

Shock resistance acc. to IEC/EN 60068-2-27 25g - 2 shocks - 13ms

Vibration resistance acc. to IEC/EN 60068-2-6 5g - 20 cycles at 5...150...5 Hz at 0.8 InAmbient temperature -25 …..+55 C

Storage temperature -40 …..+70 C

Data according to IEC 60947-2

Rated operational Voltage Un 1P : 220 V DC 2P : 440V DC

Maximum Power frequency recovery Voltage, Umax 1P : 250V DC 2P : 500V DC

Min Operating Voltage 12 V DC

Rated Ultimate short-circuit breaking Capacity, Icu 10 kA

Rated Service short-circuit breaking Capacity, Ics 10 kA

Rated impluse withstand voltage Uimp (1.2/50µs) 4 kV (test voltage 6.2 kV at sea level; 5 kV at 2,000 m)

Dielectric test voltage 2 kV (1 min)

Reference temperature for tripping characteristics 55 oC

Electrical endurance 1,500 ops

General Data

Standards IEC 60947-2

Approvals VDE

Poles 1P, 2P

Rated Curent 1.6A - 63A

Tripping Characteristics Curve C

Overvoltage category III

Pollution degree 2

Technical Data | S200M DC Flyer 3

Miniature Circuit Breaker S200M DCOrdering Codes

S202M-C1,6DC 2CDS272064R0974 1.6 6

S202M-C2DC 2CDS272064R0024 2 6

S202M-C3DC 2CDS272064R0034 3 6

S202M-C4DC 2CDS272064R0044 4 6

S202M-C6DC 2CDS272064R0064 6 6

S202M-C10DC 2CDS272064R0104 10 6

S202M-C16DC 2CDS272064R0164 16 6

S202M-C20DC 2CDS272064R0204 20 6

S202M-C25DC 2CDS272064R0254 25 6

S202M-C32DC 2CDS272064R0324 32 6

S202M-C40DC 2CDS272064R0404 40 6

S202M-C50DC 2CDS272064R0504 50 6

S202M-C63DC 2CDS272064R0634 63 6

S201M-C1,6DC 2CDS271064R0974 1.6 12

S201M-C2DC 2CDS271064R0024 2 12

S201M-C3DC 2CDS271064R0034 3 12

S201M-C4DC 2CDS271064R0044 4 12

S201M-C6DC 2CDS271064R0064 6 12

S201M-C10DC 2CDS271064R0104 10 12

S201M-C16DC 2CDS271064R0164 16 12

S201M-C20DC 2CDS271064R0204 20 12

S201M-C25DC 2CDS271064R0254 25 12

S201M-C32DC 2CDS271064R0324 32 12

S201M-C40DC 2CDS271064R0404 40 12

S201M-C50DC 2CDS271064R0504 50 12

S201M-C63DC 2CDS271064R0634 63 12

Single pole

Double Pole

Description Ordering CodeCurrent Rating

(A)Pack Unit

(Pc)

Easy identificationABB uses clever product designation. All the important technical details can be found on the device in a very simple and easily readable way.

Product family S200 Tripping Characteristics

Breaking capacity 10kA

No of poles Rated current

DC series

S20 1 M C 16DC -

4 S200M DC Flyer | Ordering CodesUse in direct current circuits | S200M DC Flyer 5

– S200M DC MCBs can be used in the one-pole version at 220 V DC and in the 2-pole or 4-pole version with series connection of two poles up to 440 V DC.

Miniature Circuit Breaker S200M DCUse in direct current circuits

– S200M DC MCBs have, in the area of arc chutes, permanent magnets. It is therefore necessary to take into account the polarity during the installation process.Incorrect polarities may cause damage to the MCB.

C 40S 202 M

DC

+

+

B365C 123456

Icu 10kA440VIEC60947-2

C 40S 202 M

DC

+

+

B365C 123456


Supply and load connections

S 201 MC 40DC

+

B365C 123456


S 201 MC 40DC

+

B365C 123456


+ Load –

– Load + – Load +

+ Load –

Example for permissible voltages between the conductors depending on the number of poles and circuit layout:

voltage Un

between conductors

220 V- 440 V- 440 V- 440 V-

voltage Un

between conductor and earth

220 V- 220 V- 440 V- 220 V-

MCB 1-pole S201M DC

2-pole S202M DC

2-pole S202M DC

2-pole S202M DC

supply from below

supply from above

–

+

–

+ –

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

– –

+-

+ +

-DC supply DC supply

When supply is given at lower terminals When supply is given at upper terminals

DC supply DC supply

+

Use in direct current circuits | S200M DC Flyer 5

– S200M DC MCBs can be used in the one-pole version at 220 V DC and in the 2-pole or 4-pole version with series connection of two poles up to 440 V DC.

Miniature Circuit Breaker S200M DCUse in direct current circuits

– S200M DC MCBs have, in the area of arc chutes, permanent magnets. It is therefore necessary to take into account the polarity during the installation process.Incorrect polarities may cause damage to the MCB.

C 40S 202 M

DC

+

+

B365C 123456


C 40S 202 M

DC

+

+

B365C 123456


Supply and load connections

S 201 MC 40DC

+

B365C 123456


S 201 MC 40DC

+

B365C 123456


+ Load –

– Load + – Load +

+ Load –

Example for permissible voltages between the conductors depending on the number of poles and circuit layout:

voltage Un

between conductors

220 V- 440 V- 440 V- 440 V-

voltage Un

between conductor and earth

220 V- 220 V- 440 V- 220 V-

MCB 1-pole S201M DC

2-pole S202M DC

2-pole S202M DC

2-pole S202M DC

supply from below

supply from above

–

+

–

+ –

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

– –

+-

+ +

-DC supply DC supply

When supply is given at lower terminals When supply is given at upper terminals

DC supply DC supply

+

Accessory overview

Dimensional drawing

Miniature Circuit Breaker S200M DCAccessories and dimensional drawings

H Auxiliary contact S2C-H6R

H-R Auxiliary contact S2C-H6-…R

S/H Signal/Auxiliary contact S2C-S/H6R

S/H (H) Signal/Auxiliary contact used as auxiliary

contact

S2C-S/H6R

ST Shunt trip S2C-A…

UR Undervoltage release S2C-UA

ST-L Shunt trip to be mounted on the left S2C-A…L

H-L Auxiliary contact to be mounted on the left S2C-H…L

H-BF Auxiliary contact for bottom fi tting (1 for

each pole of MCB)

S2C-H01/

S2C-H10

BP Mechanical tripping device S2C-BP

Description Order details Ordering Code

Auxiliary Contact, 1CO (Right side) S2C-H6R 2CDS200912R0001

Auxiliary Contact, 1NO / 1NC (Right side) S2C-H6-11R 2CDS200946R0001

Auxiliary Contact, 2NO (Right side) S2C-H6-20R 2CDS200946R0002

Auxiliary Contact, 2NC (Right side) S2C-H6-02R 2CDS200946R0003

Signal contact / Auxiliary switch, 1CO

(Right side)

S2C-S/H6R 2CDS200922R0001

Auxiliary Contact, 1NO / 1NC (Left side) S2C-H11L 2CDS200936R0001

Auxiliary Contact, 2NO (Left side) S2C-H20L 2CDS200936R0002

Auxiliary Contact, 2NC (Left side) S2C-H02L 2CDS200936R0003

Description Order details Ordering Code

Bottom fi tting Aux contact, 1NC S2C-H01 2CDS200970R0001

Bottom fi tting Aux contact, 1NO S2C-H10 2CDS200970R0002

Shunt Trip, 12...60V AC/DC S2C-A1 2CDS200909R0001

Shunt Trip, 110…415V AC,

110…250 DC

S2C-A2 2CDS200909R0002

Undervoltage Release, 12V DC S2C-UA 12 DC 2CSS200911R0001





6 S200M DC Flyer | Accessories and dimensional drawings

Railways Uninterruptible power supply (UPS)Storage batteries system

Industrial machineries

Miniature Circuit Breaker S200M DCThe best solution for DC applications

DC motor systems Air Insulated switchgear

The best solution for DC applications | S200M DC Flyer 7

ABB India Helpline: Technical Telephone support for customers and channel partners.� Toll Free: (BSNL) +91 1800 420 07 07email : [email protected]

www.abb.com/lowvoltage

Contact us©

copyright 2015 A

BB

. All rights reserved

LP/S

200M_D

C_B

rochure/2015_20_08/001

s200m dc, mcb for dc application top performance with high ... · use in direct current circuits |...

Documents