s t o o l - lifespan online

2
Congratulations on your purchase! If assembly is required follow instructions below: Chair 1. Place gas lift in star base. 2. Place seat on gas lift. Refer figure 3 above, place cushion in casing. 3. Slide the back into the seat and align screw holes. 4. Use the allen key to tighten screws in place. Stool 1. Place gas lift in star base. 2. Place seat on gas lift. (Optional castors included). 3. Place the cushion in the casing and secure in slot. How to Sit Well Disclaimer: If you have been diagnosed with a back condition, please seek advice from your health professional before using the ErgoFlip chair and stool. Tips when sitting on the Motion Cushion • Position yourself centrally on the motion cushion. • Suggesting to flip between the seat surfaces as you feel necessary.

Upload: others

Post on 25-Jan-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Congratulat ions on your purchase!

If assembly is required follow instructions below:Chair

1. Place gas lift in starbase.

2. Place seat on gas lift. Refer figure 3 above, place

cushion in casing.

3. Slide the backinto the seat andalign screw holes.

4. Use the allen key totighten screws in place.

Stool

1. Place gas lift in star base. 2. Place seat on gas lift.(Optional castors included).

3. Place the cushion in the casingand secure in slot.

How to Sit Well

Disclaimer: If you have beendiagnosed with a back condition,please seek advice from yourhealth professional before usingthe ErgoFlip chair and stool.

Tips when sitting onthe Motion Cushion

• Position yourself centrallyon the motion cushion. • Suggesting to flip betweenthe seat surfaces as you feelnecessary.

Care & WarrantyREGULAR CARE OF THE ERGOFLIP CASTOR - axle is pre-lubricated for years of smooth running. Check that castors do not become clogged withcarpet fibres.GAS LIFT - no maintenance is required, however, it is recommended adjusting the lift upwards and downwardsto help lubricate monthly.UPHOLSTERY - protect from direct sunlight and vacuum regularly using low suction. WARNING• Please do not tamper with or remove gas lift• Do not sit on back of chair or rock backwards while seated in chair SPOT CLEANING THE FABRIC CUSHION • Gently scrape any soil or mop any liquid from the surface of the fabric • Do not saturate the fabric or interior with water or other cleaning products • Spot clean using only dry shampoo or drycleaning fluid • For fixed covers professional cleaning is recommended FOAMS AND FABRICS • Foams and fabrics on this chair comply with the flammability requirements of AS/NZS 4088.1

Ready for use, comes inflatedNon-slip surfaceHighly durableWater resistant and easy to clean. Use wet wipes or damp cloth if needed.

Motion Cushion

WARRANTYThis product has a warranty for 10 years, to be free of defects, assembly, materials and workmanship. In theevent of a defect in the design, assembly, materials or workmanship of this product within 10 years from theoriginal date of purchase, ErgoFlip will repair or replace any such defective part. THIS WARRANTY DOES NOT COVER:1. Normal wear and tear2. Fabric & Motion Cushion3. Damage for misuse or abuse4. Products not maintained in accordance with instructions, or which have been altered or modified6. Any consequential or indirect loss, loss of profits, business, savings, data or records, related to this productAll others, whether oral or written, express or implied are excluded.

Patented and Design Registered.