Increased benefits, lower costs.Linde RX60 Series.

RX60-25C & 30C, RX60-25L, 30L & 35, and RX60-40, 45, 50, 50/600

Capacity 5,000 to 11,000 lb.

With Linde you get ...

RX60-25C and RX60-30C

RX60-25L, RX60-30L, and RX60-35

Power and strength inside and out. The customer driven design of Linde’s high performance electric trucks make them versatile and effective even in uncommon applications.

The RX60 series electric trucks have been designed by constantly analyzing customer applications and by adapting to changing design requirements, needs, and requests. Linde will make every effort to develop and apply technology by designing and manufacturing safer, more productive, and more durable forklifts.

Innovation is the foundation of our success.

Over 400 employees in our research and development group assure continuous product improvement and development of new technologies.

RX60-40, RX60-45, RX60-50, and RX60-50/600

Safety 3 Side battery discharge

3 Optimized visibility mast

3 Ramp start assist

3 Programmable performance

3 Available interlocks (optional)

3 “Quick set” parking brake

3 Armrest mounted horn button (optional)

Versatile & Energy Efficient3 Indoor/outdoor operation

3 Full operator cab (optional)

3 Electric heating system (optional)

3 Cold environment operation to -22 F (optional)

3 Energy return system

3 Heat management design

3 Automatic performance adaptation - save

energy with "Blue Zone"

Lowest Maintenance & Operating Cost 3 1000 hour periodic maintenance intervals

3 Easy component access

3 Adjustable automatic deceleration

3 Dual, independent CAN-bus diagnostic systems

3 Long-life multi-disc brakes

RX60-40 shown

Unmatched Performance3 High residual capacity

3 Fast acceleration

3 12 mph travel speed (laden and empty)

3 Automatic power boost function

3 Fully programmable hydraulic functions

3 100 fpm lift speed

Ergonomic Excellence3 Adjustable steering column

3 Low noise level (68 dba)

3 High comfort, full suspension seat

3 Floating operator compartment

3 Ergonomically designed floor board

3 Armrest with hydraulic mini levers

3 Display of critical information

Durability By Design3 Cast ductile iron steering axle with shock

mounting

3 Electronic components protected inside

counterweight

3 Three phase AC travel and hydraulics

3 Thermo-sensor — motor protection

3 On-board diagnostics

Advantage 80 Volts3 Comparable performance to LP and diesel

powered forklifts

3 Large battery compartments, fitting standard

and vented batteries

3 80 volts efficiency, prerequisite for fast charge

systems (optional)

Seven good reasons for choosing Linde material handling equipment:

3Unmatched Performance

3Ergonomic excellence

3Durability by design

3 Advantage 80 volts

3Safety

3Versatility

3 Low maintenance

... more than what you see.

Mast: Optimized Visibility

Floating Operator Compartment

AC Technology

Cast Steering AxleSide Battery Discharge

The Linde RX60 series is ideal for every manufacturing, storage and distribution, and forwarding business where there is a need for high

performance trucks without emissions.

With annual sales exceeding 100,000 forklift trucks, Linde ranks among the world's leading manufacturers. This position has been justly

earned. Linde trucks excel not only with their recognized innovative technology but especially due to their low energy and operating

costs.

High quality in production is matched by the standard of the services we provide. With our ten manufacturing plants and a comprehensive

network of local partners, we are at your call around the clock and around the world.

Your local Linde dealer offers a complete single-source package including qualified pre-sales consulting, after-sales service and flexible

finance options—whether leasing, renting or purchasing.

Linde Material Handling North America Corporation2450 West 5th North Street, Summerville, SC 29483Phone: 843.875.8000 . Truck Sales Fax: 843.875.8471E-mail: trucksales@lmh-na.com . www.lmh-na.com

linde

_bro

chur

e_rx

60_1

012

USA

_v12

.1