rx accessories - · pdf file62 accessories rx ® accessories any ... seals: nitrile rubber...
TRANSCRIPT
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
62 AcceSSORIeS
RX® AcceSSORIeS Any system is only as good as its weakest link. ERIKS have brought
together a range of supporting products used to connect and
enhance the performance of the complete system.
Quality and performance are just as critical when you consider that
these form the main connection between the operating units. As a
leading pneumatics supplier we have developed ranges based on
our many years experience manufacturing specialist systems.
bAll vAlveS
TubINg
SIleNceRS
gAugeS
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
47
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
ANcIllARIeS
flOw cONTROlleRS • Knurled adjusting screw with fine thread for greater control
• Locking nut
• Built in check valve for unidirectional flow control
• Through holes for direct mounting or panel mountable
code description Price each
EPVFLWCTL1/8-RX In-line flow restrictors, £10.27
Unidirectional, 1/8
EPVFLWCTL1/4-RX In-line flow restrictors, £12.11
Unidirectional, 1/4
EPVFLWCT-3/8-RX In-line flow restrictors, £27.99
Unidirectional, 3/8
EPVFLWCTL1/2-RX In-line flow restrictors, £27.99
Unidirectional, 1/2
Flow rate (litre/min)
1/8” 1/4” 3/8” 1/2”
450 600 1100 1400
TechNIcAl deTAIlS
Technical data
Fluid Compressed filtered air water
Pressure 2 10 bar
Temperature 0°C
Threads Parallel UNI - ISO 228
Tube Tolerances
Materials Body: Anodised aluminium
Needle: Nickel plated brass
Seals: Nitrile rubber (NBR)
Unidirectional with female-female thread
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
48 ANcIllARIeS
NylON cOmPAcTPRe-fORmed AIRlINe cOIlS
blOw guNS
• Fitted with BSPT Press-in-swivel couplings - complete with springs
• Excellent flexibility
• High resistance to oil, petrol, organic and inorganic media
• Lightweight
• Temperature range -40°C to +80°C
• Maximum working pressure 15bar
Part no Tube I/d (mm) Tube o/d (mm) BsPT male Thread Working length (m) Price
TU-NY-COIL-8/2-RED-RX 6 8 1/4” 2.5 £13.64
TU-NY-COIL-8/2-BLUE-RX 6 8 1/4” 2.5 £13.64
TU-NY-COIL-8/5-RED-RX 6 8 1/4” 5 £17.24
TU-NY-COIL-8/5-BLUE-RX 6 8 1/4” 5 £17.24
TU-NY-COIL-10/2-RED-RX 8 10 1/4” 2.5 £17.16
TU-NY-COIL-10/2-BLUE-RX 8 10 1/4” 2.5 £17.16
TU-NY-COIL-10/5-RED-RX 8 10 1/4” 5 £21.67
TU-NY-COIL-10/5-BLUE-RX 8 10 1/4” 5 £21.67
rX Pneumatic Blow gun, Plastic body
eriks ref Inlet Price each
EAG-A-RX 1/4” BSP £5.75
rX Pneumatic, Blow gun, metal Pistol grip
eriks ref Inlet Price each
EAG-M-RX 1/4” BSP £7.84
standard blow guns are very inefficient, for applications where the guns are used
frequently or for long periods talk to eriks about energy efficient options.
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
63
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
SINTeRed bRONze Male
code Thread size Price each
SLNCR-B-STD-1/8-RX 1/8 £0.90
SLNCR-B-STD-1/4-RX 1/4 £1.55
SLNCR-B-STD-3/8-RX 3/8 £2.45
SLNCR-B-STD-1/2-RX 1/2 £3.41
code Thread size Price each
SLNCR-B-PLUG-1/8-RX 1/8 £1.15
SLNCR-B-PLUG-1/4-RX 1/4 £1.24
SLNCR-B-PLUG-3/8-RX 3/8 £2.54
SLNCR-B-PLUG-1/2-RX 1/2 £3.19
code Thread size Price each
SLNCR-B-FLAT-1/8-RX 1/8 £0.68
SLNCR-B-FLAT-1/4-RX 1/4 £1.05
SLNCR-B-FLAT-3/8-RX 3/8 £1.55
SLNCR-B-FLAT-1/2-RX 1/2 £2.45
code Thread size Price each
SLNCR-P-STD-1/8-RX 1/8 £1.83
SLNCR-P-STD-1/4-RX 1/4 £2.11
SLNCR-P-STD-3/8-RX 3/8 £2.70
SLNCR-P-STD-1/2-RX 1/2 £3.84
SIleNceRS
flAT SINTeRed bRONze wASheRMale
flAT SINTeRed bRONzeMale
POlyeThyleNeMale
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
64
code Thread size Price each
SLNCR-P-FLWCT-1/8-RX 1/8 £3.22
SLNCR-P-FLWCT-1/4-RX 1/4 £3.50
SLNCR-P-FLWCT-3/8-RX 3/8 £9.48
SLNCR-P-FLWCT-1/2-RX 1/2 £12.71
code stem size Price each
W89A-12702 = SLNCR-P-STEM-4MM-RX 4 £1.77
W89A-12704 = SLNCR-P-STEM-6MM-RX 6 £1.77
W89A-12706 = SLNCR-P-STEM-8MM-RX 8 £2.04
W89A-12708 = SLNCR-P-STEM-10MM-RX 10 £2.37
W89A-12710 = SLNCR-P-STEM-12MM-RX 12 £3.30
SIleNceRS
POlyeThyleNe RegulATOR Male
meTRIc POlyeThyleNePuSh IN
Male
specifications
Working Pressure 0 - 12 Bar
Temperature Rating -10˚C to +80˚C
Technical data
1/8 - 1/2” taper threaded, 4 - 12 mm stem
Noise reduction
Protects the control valve from ingress of dirt
Stem variant for use on valves and manifolds with integral fittings
Flow control option for speed control of actuators at the control valve
Fitted to the exhaust ports of the control valve, these are often
the easiest way to control inaccessible actuators
TechNIcAl deTAIlS
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
65
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
PA12 NylON Tube(supplied in 30 metre coils)
TechNIcAl deTAIlS
code size (o/d I/d) colour Price each
TU-NY-425-BLK-30M-RX 4 x 2.5 Black £9.55
TU-NY-425-BLU-30M-RX 4 x 2.5 Blue £9.55
TU-NY-425-GRN-30M-RX 4 x 2.5 Green £9.55
TU-NY-425-NAT-30M-RX 4 x 2.5 Natural £9.55
TU-NY-425-RED-30M-RX 4 x 2.5 Red £9.55
TU-NY-425-YEL-30M-RX 4 x 2.5 Yellow £9.55
TU-NY-640-BLK-30M-RX 6 x 4 Black £18.02
TU-NY-640-BLU-30M-RX 6 x 4 Blue £18.02
TU-NY-640-GRN-30M-RX 6 x4 Green £18.02
TU-NY-640-NAT-30M-RX 6 x 4 Natural £18.02
TU-NY-640-RED-30M-RX 6 x 4 Red £18.02
TU-NY-640-YEL-30M-RX 6 x 4 Yellow £18.02
TU-NY-860-BLK-30M-RX 8 x 6 Black £24.33
TU-NY-860-BLU-30M-RX 8 x 6 Blue £24.33
TU-NY-860-GRN-30M-RX 8 x 6 Green £24.33
TU-NY-860-NAT-30M-RX 8 x 6 Natural £24.33
TU-NY-860-RED-30M-RX 8 x 6 Red £24.33
TU-NY-860-YEL-30M-RX 8 x 6 Yellow £24.33
TU-NY-107-BLK-30M-RX 10 x 7 Black £42.97
TU-NY-107-BLU-30M-RX 10 x 7 Blue £42.97
TU-NY-107-GRN-30M-RX 10 x 7 Green £42.97
TU-NY-107-NAT-30M-RX 10 x 7 Natural £42.97
TU-NY-107-RED-30M-RX 10 x 7 Red £42.97
TU-NY-107-YEL-30M-RX 10 x 7 Yellow £42.97
TU-NY-108-BLK-30M-RX 10 x 8 Black £30.82
TU-NY-108-BLU-30M-RX 10 x 8 Blue £30.82
TU-NY-108-GRN-30M-RX 10 x 8 Green £30.82
TU-NY-108-NAT-30M-RX 10 x 8 Natural £30.82
TU-NY-108-RED-30M-RX 10 x 8 Red £30.82
TU-NY-108-YEL-30M-RX 10 x 8 Yellow £30.82
TU-NY-129-BLK-30M-RX 12 x 9 Black £52.68
TU-NY-129-BLU-30M-RX 12 x 9 Blue £52.68
TU-NY-129-GRN-30M-RX 12 x 9 Green £52.68
TU-NY-129-NAT-30M-RX 12 x 9 Natural £52.68
TU-NY-129-RED-30M-RX 12 x 9 Red £52.68
TU-NY-129-YEL-30M-RX 12 x 9 Yellow £52.68
TU-NY-1612-NAT-30M-RX 16 x 12 Natural £92.37
TU-NY-1612-BLK-30M-RX 16 x 12 Black £92.37
TubINg
Temp 20˚C 30˚C 50˚C 60˚C 80˚C
Pressure % 100 83 62 56 50
Pressure ratings are for use in ambient temperatures of
20˚C % Pressure rating with temperature increase.
o.d / I.d Wall Thickness(mm)
Working Pressure
Bar
Burst Pressure
Bar
Bend radius
mm
4 x 2.5 x 0.75 38 152 8
6 x 4 x 1 31 127 13
8 x 6 x 1 21 84 32
10 x 7 x 1.5 27 109 32
10 x 8 x 1 15 63 50
12 x 9 x 1.5 21 84 45
16 x 12 x 2 21 84 85
specifications
Temperature Rating -40˚C to +80˚C
Tolerances ID +/- 0.1mm OD + 0.0/-0.1mm
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
66
TechNIcAl deTAIlS
code size (o/d I/d) colour Price each
TU-PU-4/25-BLK-25M-RX 4 x 2.5 Black £8.49
TU-PU-4/25-BLU-25M-RX 4 x 2.5 Blue £8.49
TU-PU-4/25-GRN-25M-RX 4 x 2.5 Green £8.49
TU-PU-4/25-NAT-25M-RX 4 x 2.5 Natural £8.49
TU-PU-4/25-RED-25M-RX 4 x 2.5 Red £8.49
TU-PU-4/25-YEL-25M-RX 4 x 2.5 Yellow £8.49
TU-PU-6/4-BLK-25M-RX 6 x 4 Black £14.05
TU-PU-6/4-BLU-25M-RX 6 x 4 Blue £14.05
TU-PU-6/4-GRN-25M-RX 6 x 4 Green £14.05
TU-PU-6/4-NAT-25M-RX 6 x 4 Natural £14.05
TU-PU-6/4-RED-25M-RX 6 x 4 Red £14.05
TU-PU-6/4-YEL-25M-RX 6 x 4 Yellow £14.05
TU-PU-8/55-BLK-25M-RX 8 x 5.5 Black £22.76
TU-PU-8/55-BLU-25M-RX 8 x 5.5 Blue £22.76
TU-PU-8/55-GRN-25M-RX 8 x 5.5 Green £22.76
TU-PU-8/55-NAT-25M-RX 8 x 5.5 Natural £22.76
TU-PU-8/55-RED-25M-RX 8 x 5.5 Red £22.76
TU-PU-8/55-YEL-25M-RX 8 x 5.5 Yellow £22.76
TU-PU-10/65-BLK-25M-RX 10 x 6.5 Black £44.56
TU-PU-10/65-BLU-25M-RX 10 x 6.5 Blue £44.56
TU-PU-10/65-GRN-25M-RX 10 x 6.5 Green £44.56
TU-PU-10/65-NAT-25M-RX 10 x 6.5 Natural £44.56
TU-PU-10/65-RED-25M-RX 10 x 6.5 Red £44.56
TU-PU-10/65-YEL-25M-RX 10 x 6.5 Yellow £44.56
TU-PU-12/8-BLK-25M-RX 12 x 8 Black £52.07
TU-PU-12/8-BLU-25M-RX 12 x 8 Blue £52.07
TU-PU-12/8-GRN-25M-RX 12 x 8 Green £52.07
TU-PU-12/8-NAT-25M-RX 12 x 8 Natural £52.07
TU-PU-12/8-RED-25M-RX 12 x 8 Red £52.07
TU-PU-12/8-YEL-25M-RX 12 x 8 Yellow £52.07
TubINg
Sh98 POlyuReThANe Tube (supplied in 25 metre coils)
o.d / I.d Wall Thickness(mm)
Working Pressure
Bar
Burst Pressure
Bar
Bend radius
mm
4 x 2.5 x 0.75 11 35 15
6 x 4 x 1 10 30 25
8 x 5.5 x 1.25 8 26 40
10 x 6.5 x 1.75 15 45 35
12 x 8 x 2 8 25 55
specifications
Temperature Rating -40˚C to +50˚C
Tolerances ID +/- 0.1mm OD + 0.0/-0.1mm
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
67
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
full bOReFemale / Female S.H.
code Threaded size (BsPP) Price each
BV-FB-FF-1/4-RX 1/4 £5.17
BV-FB-FF-3/8-RX 3/8 £5.45
BV-FB-FF-1/2-RX 1/2 £5.87
BV-FB-FF-3/4-RX 3/4 £8.72
BV-FB-FF-1-RX 1 £12.35
BV-FB-FF-1.1/4-RX 1.1/4 £23.06
BV-FB-FF-1.1/2-RX 1.1/2 £33.76
BV-FB-FF-2-RX 2 £49.67
bAll vAlveS
601/4” - 3/8”
1/2”
3/4”-1”
2”1” 1/4 - 1” 1/2
Bar PSI
50
40
30
20
10
0 25 50 75 100 125˚C32 77 122 167 212 257˚F
852
710
568
426
284
142
specifications
Working Pressure See chart above
Temperature Rating -20°C to +150°C
materials:
Body CW 617 N UNI EN 12165
Nickel Plated Forged Brass
End Adapter CW 617 N UNI EN 12165
Nickel-plated forged brass
Ball CW 614 N UNI EN 12164
Machined brass bar, chrome-plated
Ball Gaskets P.T.F.E. - Pure Teflon
Stem CW 614 N UNI EN 12164
Machined brass bar, nickel-plated
Thrust Washer P.T.F.E. - Pure Teflon
Stem Packing P.T.F.E. - Pure Teflon
Gland CW 614 N UNI EN 12164
Machined brass bar
Handle Steel Fe P02 Zinc-plated, Red P.V.C. insulated
Self-Locking Nut 8G Steel Zinc-plated steel
Full Bore series
application:
The full bore ball valves are suitable for hot and cold water, compressed air,
oils, non-corrosive fluids and hydrocarbons in general
Standard line, full bore, short threads
Perfect seal at low and high pressure
Wear resistant, solid and long lasting materials
Rapid on/off 90° turn operation
Easy visual control of open/closed position
100% Leak Tested after final assembly - Zero Leak
Threadform to ISO 228/1 standard
TechNIcAl deTAIlS
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
68 bAll vAlAveS
code Threaded size (BsPP) Price each
BV-GAS-FF-1/4-RX 1/4 £6.65
BV-GAS-FF-3/8-RX 3/8 £6.93
BV-GAS-FF-1/2-RX 1/2 £8.65
BV-GAS-FF-3/4-RX 3/4 £12.55
BV-GAS-FF-1-RX 1 £19.34
BV-GAS-FF-1.1/4-RX 1.1/4 £36.72
BV-GAS-FF-1.1/2-RX 1.1/2 £51.74
BV-GAS-FF-2-RX 2 £86.56
gas series
application:
The gas ball valves are suitable for all types of gas in systems using low and
medium pressure. The TOP GAS ball valves are suitable for hot and cold
water, compressed air, oils, non-corrosive fluids and hydrocarbons in general
Standard line, full bore, long threads
Perfect seal at low and high pressure
Wear resistant, solid and long lasting materials
Rapid on/off 90° turn operation
Easy visual control of open/closed position
Threadform to ISO 7/1 Rp parallel standard
TechNIcAl deTAIlS
materials:
Body CW 617 N UNI EN 12165
Nickel-plated forged brass
End Adapter CW 617 N UNI EN 12165
Nickel-plated forged brass
Ball CW 614 N UNI EN 12164
Machined brass bar, chrome-plated
Ball Gaskets P.T.F.E. - Pure Teflon
Stem CW 614 N UNI EN 12164
Machined brass bar, nickel-plated
O Rings Elastomer - Suitable for the use
Handle Steel Fe P02 Zinc-plated,
Yellow P.V.C. insulated
Self-Locking Nut 8G Steel Zinc-plated steel
double seal Blow out-Proof stem
(Full bore, reduced bore and gas series) These ball valves are bottom loaded
stem designed. This “anti-blow-out” stem also prevents from tampering with
the internals of the valve when in the line. The double seal is performed by an
anti-friction teflon thrust washer, working as a high pressure gasket.
gAS APPROvedFemale / Female S.H.
60
1/2”
3/4” - 1”1”1/4” - 1”1/22”
Bar
50
40
30
20
10
0 25 50 75 100 12532 77 122 167 212 257 284
140˚C˚F
PSI
852
710
568
426
284
142
specifications
Working Pressure For gas max 5 Bar. For other uses
from PN 40 (size 1/2”) to PN 20 (size 2”).
See chart above
Temperature Rating For gas -20°C +60°C. For other
uses -20°C +140°C
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
69
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
bAll vAlveS
specifications
Working Pressure 10 Bar (1.0MPa) max
Temperature Rating -10°C to +90°C
chROme PlATed wITh leveRFemale / Female
code Threaded size (BsPP) Price each
BV-MINI-FF-1/8-RX 1/8 £4.60
BV-MINI-FF-1/4-RX 1/4 £4.60
BV-MINI-FF-3/8-RX 3/8 £4.60
BV-MINI-FF-1/2-RX 1/2 £5.21
BV-MINI-FF-3/4-RX 3/4 £7.67
materials:
Body CW 617 N UNI EN 12165
Chrome-plated forged brass
Ring Nut CW 614 N UNI EN 12164
Machined brass bar
Ball CW 614 N UNI EN 12164
Machined brass bar, chrome-plated
Ball Gaskets P.T.F.E. - Pure Teflon
Stem CW 614 N UNI EN 12164
Machined brass bar, nickel-plated
Stem O Ring NBR Black rubber
Lever Handle Glass-filled Nylon Black coloured
Screw 8G Steel Zinc-plated steel
Blow Out-Proof Stem
The mini ball valves have a bottom loaded stem designed. This “anti-blow-
out” stem also prevents from tampering with the internals of the valve when in
the line. The tightness is obtained by means of a rubber ‘O’ Ring.
Full Bore series
application:
The mini ball valves are suitable for hot and cold water, compressed air, oils,
non-corrosive fluids and hydrocarbons in general
Since the mini ball valves only have one ‘O’ Ring, their use for
gas applications is not advisable
Compact line design, reduced bore
Rapid on/off 90° turn operation
Easy visual control of open/closed position.
Threadform to ISO 228/1 standard
TechNIcAl deTAIlS
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
70 gAugeS
general Purpose
Pressure gauges for use in non-corrosive environments, typically used
for pneumatic applications
Ranges 40mm to 100mm
Dial -1 to 20 Bar
Dual Scale - Bar / p.s.i.
40, 50 & 63mm Snap on window
100mm and All Panel Mount Sizes Chromed Bezel
Accuracy 40/50/63mm ASME B40.1-1991 B GRADE (+/- 3% of span)
100 ASME B40.1-1991 A GRADE (+/- 1% of span)
TechNIcAl deTAIlS
materials:
Case Black Painted Steel
Window Polycarbonate
Internal Parts Brass, Bourdon tube
Mounting Threads BSPT (unless otherwise stated)
ceNTRe bAck
specifications
Temperature Rating -25°C to +60°C
code Threaded size dia range Bar each
PG40-0/-1-CB-RX 1/8 40 -1 - 0 £6.51
PG40-02-CB-RX 1/8 40 0 - 2 £6.51
PG40-04-CB-RX 1/8 40 0 - 4 £6.51
PG40-06-CB-RX 1/8 40 0 - 6 £6.51
PG40-10-CB-RX 1/8 40 0 - 10 £6.51
PG40-20-CB-RX 1/8 40 0 - 20 £6.51
PG50-0/-1-CB-RX 1/8 50 -1 - 0 £6.74
PG50-02-CB-RX 1/8 50 0 - 2 £6.74
PG50-04-CB-RX 1/8 50 0 - 4 £6.74
PG50-06-CB-RX 1/8 50 0 - 6 £6.74
PG50-10-CB-RX 1/8 50 0 - 10 £6.74
PG50-20-CB-RX 1/8 50 0 - 20 £6.74
PG63-02-CB-RX 1/4 63 0 - 2 £8.21
PG63-04-CB-RX 1/4 63 0 - 4 £8.21
PG63-06-CB-RX 1/4 63 0 - 6 £8.21
PG63-10-CB-RX 1/4 63 0 - 10 £8.21
PG63-20-CB-RX 1/4 63 0 - 20 £8.21
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
71
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
code Threaded size dia range Bar each
PG40-02-PM-RX 1/8 40 0 - 2 £10.30
PG40-04-PM-RX 1/8 40 0 - 4 £10.30
PG40-06-PM-RX 1/8 40 0 - 6 £10.30
PG40-10-PM-RX 1/8 40 0 - 10 £10.30
PG50-02-PM-RX 1/8 50 0 - 2 £11.00
PG50-04-PM-RX 1/8 50 0 - 4 £11.00
PG50-06-PM-RX 1/8 50 0 - 6 £11.00
PG50-10-PM-RX 1/8 50 0 - 10 £11.00
code Threaded size dia range Bar each
PG50-0/-1-BE-RX 1/8 50 -1 - 0 £6.20
PG50-02-BE-RX 1/8 50 0 - 2 £6.20
PG50-06-BE-RX 1/8 50 0 - 6 £6.20
PG50-10-BE-RX 1/8 50 0 - 10 £6.20
PG50-16-BE-RX 1/8 50 0 - 16 £6.20
PG50-20-BE-RX 1/8 50 0 - 20 £6.20
PG63-0/-1-BE-RX 1/4 63 -1 - 0 £7.75
PG63-02-BE-RX 1/4 63 0 - 2 £7.75
PG63-06-BE-RX 1/4 63 0 - 6 £7.75
PG63-10-BE-RX 1/4 63 0 - 10 £7.75
PG63-16-BE-RX 1/4 63 0 - 16 £7.75
PG63-20-BE-RX 1/4 63 0 - 20 £7.75
PG100-0/-1-BE-RX 3/8 BSPP 100 -1 - 0 £19.91
PG100-02-BE-RX 3/8 BSPP 100 0 - 2 £19.91
PG100-06-BE-RX 3/8 BSPP 100 0 - 6 £19.91
PG100-10-BE-RX 3/8 BSPP 100 0 - 10 £19.91
PG100-16-BE-RX 3/8 BSPP 100 0 - 16 £19.91
PG100-20-BE-RX 3/8 BSPP 100 0 - 20 £19.91
gAugeS
bOTTOm eNTRy
ceNTRe bAck, PANel mOuNT
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
Inspiration in everything we do .
Quality, Precision and Unbeatable Value! Full technical advice and support CALL ERIKS ON 0845 006 6000
72 gAugeS
glyceRINe bOTTle
code Threaded size dia range Bar Price each
PG100-SS-0/-1-BE-RX 1/2 BSPP 100 -1 - 0 £65.54
PG100-SS-02-BE-RX 1/2 BSPP 100 0 - 2 £65.54
PG100-SS-06-BE-RX 1/2 BSPP 100 0 - 6 £65.54
PG100-SS-10-BE-RX 1/2 BSPP 100 0 - 10 £65.54
specifications
Pressure Limitation Constant Pressure 100%. Cyclic
Pressure 90%. Over Pressure 130%
Temperature Rating -25˚C to +60˚C
materials:
Case Stainless Steel 304
Window Laminated Safety Glass
Internal Parts Stainless Steel 316, Bourdon tube
Mounting Threads 1/2” BSPP
All STAINleSS STeel PROceSS gAuge
Process gauges
Stainless steel gauges for fluid and gaseous media, compatible to
the wetted parts (SUS 316)
Ranges 100mm
Dial -1 to 10 Bar
Gauges are supplied dry, but have a fillable case
Suitable glycerine is available in single fill bottles
Dual Scale - Bar / p.s.i.
Protection ratings IP65
Accuracy EN 873-1 (1% of scale)
TechNIcAl deTAIlS
code size Price each
GLY-BTL-100MM-RX Single fill 100ml £13.89