rutger van duijn, dacon - pieter troost, tiat 2017 · dacon inspection technology bv • visuele...
TRANSCRIPT
Rutger van Duijn, Dacon - Pieter Troost, TiaT2017
Dacon Inspection Technology bv
• Visuele Inspectie Apparatuur
• Advies
• Training
Noordwijk, Nederland
TiaT europe bv
• NDT Training
• NDT Inspectie
• NDT Consultancy
Roosendaal, Nederland
▪ Current NDT Methods and Techniques
▪ Trends & Developments
o Causes for change
o General developments in NDT methods, techniques and approach
▪ Examples/Demo’s:
o Visual Inspection (borescope Inspections)
• Remote inspection
• Predix
Source: LCR Systems
Visual
Eddy Current
Ultrasonic Penetrant
Thermography
Shearography
Magnetic Particle Radiography
▪ Global growth in aviation demand of 4.7% per year until 2033
▪ Increased competition, Pressure on costs and turn-around time
▪ Growth in lease market and changes in ownership.
▪ Loss of skilled labor and/or limitation in foreign labor
employment
▪ Longer inspection intervals,
Source: aviationcv.com
▪ 50% of commercial aircraft fleet will be Composite by 2030
▪ Introduction of nonmetallic material in engines
(Composite & Ceramic)
▪ Introduction of new manufacturing processes
(3D printing, Special welding, etc.)
Source: CFM
▪ Aerospace Engine MRO NDT requires innovation to cope
with trends
▪ Innovation must lead to:
o Increased efficiency
o Faster inspection (Shorter Time on the Ground)
o Cost reduction
o Effective information systems
o Dedicated training of NDT personnel
Source: aerospace testing international
▪ Efficiency & Speed:
o Array Probes (UT & ET)
o Scanners (UT, ET, RT, ST, TT, VT)
o Automated Processing (PT)
o Automated Inspection Systems and Robots
(ET, UT, RT, TT, ST)
o Utilizing & Development of new NDT methods
Source: Sonatest
Source: Rohmann
Source: Dolphicam.com
o Utilizing & Development new NDT methods (continued)
• Infrared thermography
• Shearography and Optical
• Optical
Source: Faro
Source: Opgal
o Utilizing & Development new NDT methods (continued)
• Digital Radiography / Computed Tomography / Dual Energy
Source: Wikipedia
Source: Vidisco
Source: www.gemeasurement.com
o Utilizing & Development new NDT methods (continued)
• Next Generation of Remote Visual Equipment (for borescope
inspections); goals for near future:
1. Increasing Efficiency
2. Cost reduction
3. Accuracy of inspection
1. Efficiency: Automation, use of robots
for repetitive inspections, Robot controlled,
Remote Inspection
2. Costs: Innovation; using cheaper imaging techniques while
increasing image quality
3. Accuracy: 3D image overlay, defect recognition by artificial
intelligence, monitoring wear and predicting condition
Source: www.gemeasurement.com
▪ Cost reduction:
o Environmental friendly materials (PT, MT)
▪ Effective Information:
o Visualization of Inspection results
o Remote Inspection
o Big Data & Artificial Intelligence
Monitoring, Prediction, Reporting
Sharing results
▪ Training:
o Online training and examination
o Virtual Reality training
Source: Tecnatom
Source: ICRIT.nl
▪ Challenges:
o Automated Inspection
o Fast Inspection Methods and Techniques
o Usable on composite materials (including ceramic)
o Data Handling (Recording, Analysis and Evaluation, Accessibility)
o Remote Inspection
o Dedicated Personnel Training,
Qualification and Certification
Source: ceralink.com
▪ Automation Challenges for MRO NDT:
o Position and Orientation Sensor/Inspection System relative to
inspection surface
o Accurate location information of the data (results)
o Covering complex curved surfaces
o Smart movement
Source: LCR Systems
▪ NDT Inspection utilizing automated
inspection systems results in a
fast amount of Data
o A “platform” is needed for recording data,
to enable smart analysis and evaluation
of the data (combined with CAD information)
o Report generation
o Big Data approach to some extend
(Volume, Velocity, Varity and Veracity))
o Prediction of component condition
o Ownership
o Availability
o Configuration (arrangement) of all data
o Personnel responsibilities
▪ Predix Presentation Source: www.gemeasurement.com
▪ The legacy NDT systems rely mostly on evaluation on site by
well qualified personnel.
▪ When using the Automated Systems with more recent NDT
Techniques, the inspection data is digitally available and
can be send to specialists throughout the world using
internet, This increases speed of inspection and can
contribute to the consistency of the inspections.
Source: Sandia National Laboratories
▪ Remote Borescope Inspection; Demo Case
NDT
Automation
Remote
Data
▪ By further development and innovation of our Aerospace
NDT for MRO we assure our position on the global market
for the longer term.
▪ Future Aerospace MRO requires a more global approach
through (international) cooperation
Thank you for your attention.
Questions?
Rutger van Duijn Pieter Troost
Dacon TiaT